Computer numerical controller machinist jobs in Eagan, MN - 392 jobs

This position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, setup and operate equipment, and perform visual and dimensional inspections on machined components. Essential Functions * Must be knowledgeable of, and adhere to, the TOMZ Quality Management System. * Ability to operate and maintain production on equipment within the department. Ex. include Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, Willemin Mill turns, various 3-4-5 axis mills, Anodize/Passivation Lines. * Demonstrated ability to perform offsets and change tools to maintain efficient production with minimal support. * Ability to efficiently set up complex legacy components and complex new production orders and ensure the machine is ready for steady production. * Perform visual and dimensional inspections on manufactured components, as required using microscope, micrometer, caliper, pin gages, thread gages, comparator, micro-hite, CMM, vision system, etc. * Regularly and as prescribed, perform preventive maintenance of equipment. * Lead and train on problem solving activities for complex machine or process issues. * Completes and compiles necessary documentation related to Quality Inspection standards. * Ensure proper material control, identification and traceability is maintained for conforming and nonconforming material through the manufacturing processes. * Lead and train on Quality Best Practices and GDP/GMP continuous improvement efforts. * Utilize and navigate ERP and QMS systems to ensure inspection and traceability activities are properly documented and controlled, as needed. * Fit and assemble parts into complex assemblies when required. * Perform Zeiss (or similar) CMM Gage R&R activities for NPI. * Perform all AQL data needed when running production with all data entered to the ERP system. * Perform Qualification runs on NPI to the customers specifications. * Perform 1st article inspection with minimal support. * Provide guidance and training to Machinists level I, II & III. * Perform FANUC (or similar) robot adjustments on basic programs. * Must maintain safe working conditions and follow occupational Safety and Health requirements including Personal Protective Equipment (PPE) guidance and rules. * Other duties and responsibilities are assigned. Qualifications: Education * Certification from a Machine trades technical school program, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred). Experience * Certification from a Machine trades technical school program and ten years relevant work experience in a regulated medical manufacturing environment, or fifteen years in a regulated medical manufacturing environment. Qualifications * Class I, II and/or III Medical Device manufacturing experience. * Knowledge of and experience with GMP/ISO standards. * Advanced understanding of the usage and care of mechanical equipment and inspection processes. * Ability to use hand-held tools to perform preventive maintenance or repair activities and install or change tools. * Experience editing programs through machine controls. * "Hands-on" self-starter with ability to work both independently and as part of a team. * Ability to effectively read and understand blueprints, specifications, GD&T, and procedures. * Maintains accuracy and attention to detail at all times and completes tasks in a timely manner. * Ability to work with a variety of functional areas, including R&D, Manufacturing, and QA, as required, accomplishing results with minimal guidance. Preferred Skills * Intermediate skills with Microsoft Excel and Word * Strong verbal and written English language communication skills. Pay Range: $30 - $38 an hour

Our Machinists perform vertical mill machining at very close tolerances, adjust CAM programs using Gibbs CAM, machine set up and inspections of the parts they machine. Machining programs are created by our full-time programmer in Gibbs CAM but all machinists have the ability to edit their programs. The majority of our parts are made from high performance plastic; however, machinists will also work with aluminum, 303 stainless steel and machinable ceramic. Short runs, no production work. All newer CNC vertical milling machines-Kira and Kitamura Super clean and bright shop! Very rewarding work - no long-run production parts Shifts available: 1st shift Monday-Thursday, 5:00am-3:20pm, full-time benefits eligible 2nd shift Monday-Thursday, 3:00pm-1:20am (8% shift differential) full-time benefits eligible Weekend shift- Friday-Sunday, 5:00am-5:20pm (25% shift differential) full-time benefits eligible Qualifications Minimum of either a Two-year Vo-Tech education in CNC Machining Technology OR Right Skills Now Certificate for manufacturing and 6 months related machining experience OR 1+ year manual/CNC machining experience. Ability to perform close tolerance work, read and comprehend part drawings and inspect his/her own work using both computer controlled and hand tool inspection equipment Programming experience with any CAM packages a plus (Virtual Gibbs highly preferred) Motivated, responsible, cooperative Pay range for this position is $24.00 to $38.00. This salary information serves as a general guideline for starting wages. Several factors are considered when making an offer for this position including but not limited to work experience, education, geographic location, certifications, key skills, market and business conditions. Johnstech can share more about the specific compensation package for your preferred role during the hiring process. Benefit offerings and perks for full-time employees include: Medical Insurance (ICHRA) Health Savings Account (HSA) for qualified insurance plans- employer and employee funded Flexible Spending Account (FSA) for qualified insurance plans-employee funded Dental Insurance Vision Insurance Accidental Insurance Critical Illness Insurance Basic Life & AD&D Insurance Supplemental Life & AD&D Insurance 401(k) Safe Harbor Plan + company matching Long Term Disability Insurance Tuition Assistance Paid Time Off - Holiday, Personal Holiday, Volunteer Day and accrued PTO Paid Parental Leave Paid Bereavement Paid Jury Duty Free parking Complimentary coffee (Caribou), apple cider, hot chocolate, tea & fresh popped popcorn! About Johnstech Founded in 1991, Johnstech's designs, patents and manufactures high performance test sockets are sold primarily to integrated circuit manufacturers and IC test contractors. The company's patented technologies allow its contactors to achieve far greater accuracy and improved reliability in test results. These high-performance contactors are leading an industry-wide move away from traditional test sockets. Johnstech is headquartered in Minneapolis, Minnesota, with offices in Singapore and Philippines. For more information, visit ****************** Johnstech is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job DescriptionTOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485. Summary of Position: Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within the Swiss machining department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment. Essential Functions: Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills. Perform offsets and tool changes to ensure efficient production with minimal support. Set up complex legacy components and new production orders for steady machine operation. Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. Perform scheduled and regular preventive maintenance on equipment. Drive problem-solving activities for complex machine or process issues. Complete and compile documentation related to quality inspection standards. Ensure proper material control, identification, and traceability for conforming and nonconforming materials. Support Quality Best Practices and contribute to continuous improvement in GDP/GMP. Capable of mentoring and training lower-level machinists. Facilitate a continuous improvement in culture and ensure quality and delivery objectives are met. Utilize ERP and QMS systems to document and control inspection and traceability activities. Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. Adhere to the TOMZ Quality Management System. Perform other duties as assigned. Qualifications: Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials. Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive. Knowledge of and experience with GMP/ISO standards. A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance. Advanced understanding of mechanical equipment usage, care, and inspection processes. Ability to use hand-held tools for preventive maintenance, repairs, and tool changes. Skilled in reading and understanding of blueprints, specifications, and procedures. Detail-oriented with the ability to maintain accuracy and complete tasks promptly. Proficient in identifying nonconformances and maintaining organization. Intermediate skills in GD&T. Education: Certification from a technical school program or equivalent, directly transferable work experience in a manufacturing or engineering discipline may be accepted. Certification from a technical school program is strongly preferred. Experience: Minimum of 3-7 years' experience in a regulated manufacturing environment. Preferred Skills: Strong verbal and written English language communication skills. Physical Requirements: Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead. 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products. Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required. Ability to sit or stand for prolonged periods. WEEKEND SHIFT: 20% DIFFERENTIAL 5AM-5PM FRI-SUN 2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM 1st shift- No differential Pay range: $31.00-$37.00 #SJ24

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description ENJOY THE FREEDOMS OF WORKING IN SOUTH DAKOTA!!! This job is located in Humobldt, SD. Just 20 minutes away from Sioux Falls, SD. APPLY AT: ******************************************************************** Hourly Range $30-$37.50 Duties and Essential Job Functions 2-year Technical degree or equivalent, 5+ years experience and attention to detail is required. Duties will include: -Programming new parts and optimizing existing programs on a Citizen L32 -Performing set-ups on multiple Citizen L32 Swiss machines -Load stock into bar feeder and monitor the machining process -Make necessary adjustments to maintain nominal print dimensions and required surface finishes -Performs visual and physical inspection of parts produced per QMS -Performs accurate transactions (clock on, clock off, entering quantities, closing out operation when done, filling in appropriate paperwork). -Keep a clean and organized work environment -May be responsible for overseeing other Swiss operators Personal Effectiveness Competencies -Integrity: displaying accepted social and work behaviors -Willingness to learn: understanding the importance of learning new information for both current and future problem-solving and decision-making interpersonal skills -Must maintain a positive attitude, leadership skills, independent judgment, and strong communication skills. Academic Competencies -Applied science: using scientific rules and methods to solve problems -Basic computer skills: using a personal computer and related applications to convey and retrieve information -Applied mathematics and measurement: using mathematics to solve problems -Reading for information: understanding written sentences and paragraphs in work-related documents -Business writing: using standard business English -Listening to and following directions: giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times -Locating and using information: knowing how to find information and identifying essential information -Speaking and presentation: speaking so others can understand Workplace Competencies -Business fundamentals: determining how an economy functions as a whole -Teamwork: developed capacities used to work with people to achieve goals -Adaptability and flexibility: being open to change and to considerable variety in the workplace -Marketing and customer focus: actively looking for ways to identify market demands and meet the customer or client needs -Planning and organizing: identifying complex problems and reviewing related information to develop and evaluate options and implement solutions -Problem-solving and decision-making: considering the relative costs and benefits of potential actions to choose the most appropriate one -Applied technology: developed capacities used to design, set-up, operate, and correct malfunctions involving application of machines or technological systems Industry-Wide Technical Competencies -Technical drawings and schematics -CAD drawing fundamentals -Troubleshooting processes -Set up, operate, monitor, control, and improve manufacturing processes and schedules to meet customer requirements Critical Work Functions: -Programming Citizen L32 Work Centers -Perform manufacturing process applications and operations -Production basics -Precision measurement -Manual tool and equipment operations -Basic manufacturing process applications and operations Future Competencies (As Necessary) -Tool Selection training -Speeds and Feed training -GD&T training *Enjoy the freedoms of living in South Dakota!!! Benefits offered: 2 Medical plans, Dental, Vision, LTD, STD, Life, HSA, 3% Simple IRA match and other voluntary plans offered through Aflac, PTO that is accrued at each pay cycle, flexible work schedule and more! #hc43170

About rms Company rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Swiss/Lathe CNC Machinist Position Summary The Swiss/Lathe CNC Machinist operates CNC machines to support the manufacture of components and devices for the medical device industry. 2nd Shift: Monday - Thursday 4:00pm - 2:00am Sign-On Bonus Available: $1,000-$5,000 dependent on level of experience! Responsibilities Swiss/Lathe CNC Machinist Duties and Responsibilities • Able to operate CNC Swiss/Lathe machines • Manufacture parts to print • Ability to use inspection equipment to inspect parts • Proficient at blueprint reading and geometric tolerancing • Maintain a high level of quality • Collect SPC data to maintain process control Qualifications Swiss/Lathe CNC Machinist Position Requirements Operator experience with Swiss or Lathe CNC machines Strong math background, preferable in machine math/shop math Understanding of Geometric Dimensioning and Tolerancing (GD&T) Ability to read and interpret blueprints Experience using a microscope Ability to read measurement equipment such as micrometer, caliper, pressure micrometer Swiss'/Lathe CNC Machinist Preferred Knowledge, Skills and Abilities Machining experience with medical components, devices, or instruments Previous experience with tight tolerances Programming experience with Swiss CNC Machines Experience with set-up on Swiss CNC Machines Experience in troubleshooting of Swiss CNC Machines rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: Onsite Clinic Paid Parental Leave Monthly Social Events Annual Employee Appreciation Week Volunteer Opportunities Training and Development Opportunities Tuition Reimbursement Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $21.20 - USD $36.49 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Job Title: 2nd Shift CNC Machinist - Direct Hire Compensation: $28.00-$38.00 per hour (DOQ) Schedule: 2nd Shift | Monday-Thursday | 4:00pm-2:30am Job Type: Direct Hire | Full-time About the OpportunityDoherty Staffing Solutions is hiring a 2nd Shift CNC Machinist for a metal manufacturing / die casting company in Minneapolis, MN. In this role, you'll support efficient production by setting up, troubleshooting, and optimizing CNC and dedicated equipment in a team-focused manufacturing environment. This opportunity offers career growth, competitive pay, and strong benefits-including employee ownership-for motivated machinists looking to take the next step in their career.What You'll Do as a 2nd Shift CNC Machinist: Set up, operate, and tear down CNC and dedicated equipment using approved processes Troubleshoot equipment, programs, and tooling issues to minimize downtime Edit and adjust CNC programs, offsets, and tool changes in collaboration with Engineering Read and interpret prints, SPC data, CMM results, and GD&T specifications Support process improvements, DOEs, and new project development Perform daily production work to ensure parts meet quality and accuracy standards Provide leadership and direction when the supervisor is unavailable What You Need to Bring to the 2nd Shift CNC Machinist Role: 3-5 years of CNC machining experience in a machine shop or similar environment Strong skills in CNC setup, troubleshooting, and program editing Ability to read blueprints and interpret GD&T Experience analyzing inspection data (CMM, SPC, process studies) Vocational or technical training in precision machining preferred Ability to work independently and support team goals Reliable transportation to the Minneapolis facility Ability to follow all safety, environmental, and quality requirements #metrocareers Pay and Benefits: Competitive hourly pay with weekly paychecks Employee Stock Ownership Plan (ESOP) 401(k) with company match Paid holidays and vacation Individual Coverage Health Reimbursement Account (ICHRA) Vision and dental insurance Short- and long-term disability and life insurance Ready to Apply?Click Apply Now to complete our quick, mobile-friendly application. If you have questions about the 2nd Shift CNC Machinist role, contact your local Doherty Staffing Solutions office for more information at 952-832-3576 or janderson@doherty.com.

Job Description DUTIES AND RESPONSIBILITIES: Operate Hurco CNC vertical machines using conversational programming and NC code generated from CAM software. Work effectively in a fast-paced, short-run style production environment with frequent part changes. Program new jobs while current parts are running to maximize machine utilization and throughput. Confirm machine and job assignments with leadership at the beginning of each shift or job. Produce precision parts to customer specifications and within acceptable production timeframes. Follow and execute all written and verbal instructions from documentation, including Shop Travelers, Inspection Sheets, blueprints, and work orders. Perform and document in-process inspections to ensure product quality. Communicate promptly with Quality Control, Supervisor, or Plant Manager regarding any part issues, non-conformances, or concerns. Unload and package finished parts according to JBT Machining and customer requirements. Maintain accurate daily records of job activities including quantities, run times, and scrap data in both Shop Travelers and the ERP system. Perform required preventative maintenance on assigned equipment; monitor machines for abnormal conditions and report issues to maintenance or leadership. Maintain a clean, organized, and safe work area in compliance with 5S procedures and JBT Machining Safety Policies. Use appropriate Personal Protective Equipment (PPE) and adhere to all company safety protocols. Maintain all required documentation in an accurate and timely manner. Perform other duties as assigned by supervisors or management. KNOWLEDGE, SKILLS AND ABILITIES: Gibbs or Hurco Conversational experience preferred. 3axis and 4axis vertical mill experience preferred. Experience working in a fast-paced environment. Problem-solving and attention to detail. The ability to multitask on a wide variety of projects. Candidates must support and promote our Cultural Tenets; Do the Right Thing, Trust, Put the Team First, Accountability, Collaboration, Communication, Clarity on Reality and Feedback. Contact us directly for a tour of our top-notch, environmentally controlled facility! Here's what we can offer: Medical, Dental, and Vision after 60 days of employment Competitive Wellness Program, providing up to 100% discount on medical premiums Short-Term and Long-Term Disability Supplemental Accident Insurance through Allstate for additional coverage on accidents + cancer Employer-Paid Life Insurance 401(k) after 60 days of employment + competitive match after one year Paid Time Off starting after 90 days of employment Paid Holidays starting day one! Health Savings Account and Flexible Spending Account Great discount programs in automotive, technology, and more Education Assistance is available for job-related courses to further your education, with up to 100% paid tuition for maintenance-related coursework and certifications Career Advancement Opportunities Teammate Assistance Program (TAP), which offers professional assistance for Counseling, Financial, Legal, and Family services Wage Range: $22.00 - $31.00/hour Shift: 1st (Monday-Thursday: 6am-4:30pm, Friday: 6am-11am) JBT Machining is a safety- sensitive workplace. All employment offers are contingent upon results of a 10-panel drug screening including marijuana. JBT Machining is an equal opportunity employer and considers all qualified applicants without regard to any classification protected by federal, state and/or local law.

Mid Continent Engineering is seeking a CNC Machinist to join our team! This is a 1st Shift- 6 am to 4:30 pm, Monday through Thursday opportunity. Mid-Continent has been a supplier to first-tier OEMs within the medical, aerospace and defense industries for decades. Mid-Continent Engineering stuffs the armed forces supply chain with products of our capabilities such as precision machining, aerospace welding, chromate conversion, paint/powder coat finishing, mechanical assemblies, and other design-assist services. A few things we have to offer: Competitive Wages Medical, Dental & Vision for employee & family including domestic partners. 401k Tuition Reimbursement PTO accrual starts immediately. Yearly shoe allowance Referral Program Summary: This position will be responsible for the set-up, adjustment, and operation of CNC Mill Machines. Use of tools to perform progressive machining operations on a variety of standardized work, having close tolerances and finish requirements. Essential Duties & Responsibilities include the following: The ability to operate and set-up CNC Mill Machines. Analyze drawings, sketches, and design data of parts to determine dimension & configuration of cuts, selection of cutting tools, machine speeds and feed rates. Revise program if needed to eliminate instruction errors or omissions. Use shop equipment, overhead cranes, chains, slings, and forklifts in a safe manner. Communicate with co-workers/supervisors to maintain a safe and positive work environment. Perform other duties, as assigned. Education & Experience: High School Diploma or G.E.D. Prefer a degree from a two-year technical school. 3+ years of CNC Mill Machine or relevant shop experience Programming experience with Surf Cam or Mastercam, is a plus. Ability to read and interpret blueprints, written instructions, and processing. Epicor ERP Software experience is a plus. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use of hands, fingers, feet, and hands to reach with arms. The ability to talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees must be able to cope with Minnesota climate variances, endure heat & cold conditions in the shop. Endure heavy workloads, high noise levels from hammering, and grinding (hearing protection provided). Protect against metal particles, fumes, sparks, particles, and gases (safety glasses, safety-toed boots, ear plugs, and gloves provided per the company policy guidelines). Individuals working in an office setting will not endure some of the physical & work environments conditions of the production floor unless office is adjacent to the production floor or per the individuals job duties and/ or responsibilities. All office personnel must abide by the PPE guidelines (safety glasses, safety-toed boots that are provided per the company policy guidelines) when entering the production floor or if a requirement of a department that individual is entering or working in. 1st Shift- 6 am to 4:30 pm- Monday through Thursday

Full-time Description At UMC, we don't just make products - we innovate, solve problems, and build a better future. As a proud, privately owned second-generation manufacturer, we've earned our reputation as leaders in our industry by producing highly complex parts with precision and ingenuity. What sets us apart? Our people. We're a passionate team that values collaboration, continuous learning, and going above and beyond. If this sounds like your kind of workplace, keep reading! Why UMC? Generous PTO: Start with 3 weeks of paid time off per year, with accrual starting on day one. Comprehensive Benefits: Medical, dental, vision, short- and long-term disability, and paid holidays. Competivie Pay: The position includes a 20% shift differential and an annual $3,000.00 retention bonus. 401k Match: Dollar-for-dollar matching up to 5%. Professional Growth: Tuition reimbursement for professional development. Work Schedule: Friday-Sunday, 4:00 am-4:30 pm or 5:00am-5:30pm, onsite in Monticello, MN. About the Role As a Swiss CNC Machinist, you will play a key role in the daily operation and setup of Swiss CNC machines, ensuring quality, precision, and efficiency in our manufacturing processes. You will be responsible for meeting production goals, troubleshooting processes, and maintaining a safe, high-performing work environment. If you enjoy working with cutting-edge technology, solving problems, continuously improving processes, and are aligned with our core values- Great People, Going Beyond, and Growing -we would love to have you join our team. What You'll Do Independently set up and operate machines for various jobs, ensuring adherence to company quality standards and production efficiency. While seeking assistance from a supervisor or senior machinist for advanced setups, as needed. Troubleshoot production issues with support from Senior Machinist, Supervisors, and Engineers to ensure smooth production flow. Conducted in-process inspections of machined products, documenting results to ensure products met specifications. Assist Junior Machinists and Production Operators in diagnosing and resolving technical issues that arise during machining operations, to enhance team competency and flexibility. Maintain a safe working environment, upholding a proactive safety culture by identifying and addressing potential hazards. Requirements Education and Experience: Associates degree in Machining or related field or work experience in place of education. 2+ years' experience as a machinist Citizen or Star Swiss Machining experience preferred. Skills and Competencies: Ability to express ideas, share information, listen actively, and demonstrate professionalism in written and verbal communication. Able to read and interpret blueprints, use simple math to perform basic calculations, and use hand-held measuring tools. Basic knowledge of CMM, VCMM, and GD&T. Promotes a sense of urgency to expedite work through area while maintaining quality standards. Strong mechanical aptitude. Excellent attention to detail and problem-solving skills. Able to make effective and timely decisions. Ability to work independently and as part of a team. Able to work efficiently with minimal supervision. Embodies the personal commitment to the shared core values of UMC: Great People, Going Beyond, and Growing. Culture Fit: You're a team player who thrives on collaboration. You bring a growth mindset and embrace challenges with grit. You care deeply about delivering excellence and going beyond expectations. Ready to Join a Winning Team? If you're passionate about building relationships, solving problems, and contributing to a culture of innovation, UMC is the place for you. Let's grow together - apply today and make an impact! UMC is an Equal Employment Opportunity Employer Salary Description $31.82-$47.10/hour Differential Included

Job Description Mid Continent Engineering is seeking a CNC Machinist to join our team! This is a 1st Shift- 6 am to 4:30 pm, Monday through Thursday opportunity. Mid-Continent has been a supplier to first-tier OEMs within the medical, aerospace and defense industries for decades. Mid-Continent Engineering stuffs the armed forces supply chain with products of our capabilities such as precision machining, aerospace welding, chromate conversion, paint/powder coat finishing, mechanical assemblies, and other design-assist services. A few things we have to offer: Competitive Wages Medical, Dental & Vision for employee & family including domestic partners. 401k Tuition Reimbursement PTO accrual starts immediately. Yearly shoe allowance Referral Program Summary: This position will be responsible for the set-up, adjustment, and operation of CNC Mill Machines. Use of tools to perform progressive machining operations on a variety of standardized work, having close tolerances and finish requirements. Essential Duties & Responsibilities include the following: The ability to operate and set-up CNC Mill Machines. Analyze drawings, sketches, and design data of parts to determine dimension & configuration of cuts, selection of cutting tools, machine speeds and feed rates. Revise program if needed to eliminate instruction errors or omissions. Use shop equipment, overhead cranes, chains, slings, and forklifts in a safe manner. Communicate with co-workers/supervisors to maintain a safe and positive work environment. Perform other duties, as assigned. Education & Experience: High School Diploma or G.E.D. Prefer a degree from a two-year technical school. 3+ years of CNC Mill Machine or relevant shop experience Programming experience with Surf Cam or Mastercam, is a plus. Ability to read and interpret blueprints, written instructions, and processing. Epicor ERP Software experience is a plus. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use of hands, fingers, feet, and hands to reach with arms. The ability to talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees must be able to cope with Minnesota climate variances, endure heat & cold conditions in the shop. Endure heavy workloads, high noise levels from hammering, and grinding (hearing protection provided). Protect against metal particles, fumes, sparks, particles, and gases (safety glasses, safety-toed boots, ear plugs, and gloves provided per the company policy guidelines). Individuals working in an office setting will not endure some of the physical & work environments conditions of the production floor unless office is adjacent to the production floor or per the individuals job duties and/ or responsibilities. All office personnel must abide by the PPE guidelines (safety glasses, safety-toed boots that are provided per the company policy guidelines) when entering the production floor or if a requirement of a department that individual is entering or working in. 1st Shift- 6 am to 4:30 pm- Monday through Thursday

Job Description Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within the Swiss machining department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment. Essential Functions: Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills. Perform offsets and tool changes to ensure efficient production with minimal support. Set up complex legacy components and new production orders for steady machine operation. Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. Perform scheduled and regular preventive maintenance on equipment. Drive problem-solving activities for complex machine or process issues. Complete and compile documentation related to quality inspection standards. Ensure proper material control, identification, and traceability for conforming and nonconforming materials. Support Quality Best Practicesand contribute to continuous improvement in GDP/GMP. Capable of mentoring and training lower-level machinists. Facilitate a continuous improvement in culture and ensure quality and delivery objectives are met. Utilize ERP and QMS systems to document and control inspection and traceability activities. Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. Adhere to the TOMZ Quality Management System. Perform other duties as assigned. Qualifications: Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials. Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive. Knowledge of and experience with GMP/ISO standards. A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance. Advanced understanding of mechanical equipment usage, care, and inspection processes. Ability to use hand-held tools for preventive maintenance, repairs, and tool changes. Skilled in reading and understanding of blueprints, specifications, and procedures. Detail-oriented with the ability to maintain accuracy and complete tasks promptly. Proficient in identifying nonconformances and maintaining organization. Intermediate skills in GD&T. Education: Certification from a technical school program or equivalent, directly transferable work experience in a manufacturing or engineering discipline may be accepted. Certification from a technical school program is strongly preferred. Experience: Minimum of 3-7 years' experience in a regulated manufacturing environment. Preferred Skills: Strong verbal and written English language communication skills. Physical Requirements: Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead. 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products. Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required. Ability to sit or stand for prolonged periods. WEEKEND SHIFT: 20% DIFFERENTIAL 5AM-5PM FRI-SUN 2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM 1st shift- No differential You should be proficient in: GD&T Machines & technologies you'll use: CNC Swiss Lathe (Citizen, Tsugami) CNC Mill (5+ axis VMC) CNC Lathe (5+ axis)

Resonetics, the world leader in micro manufacturing for the life sciences industry, is changing the industry and elevating the customer experience resulting in rapid growth domestically and internationally. This is a phenomenal opportunity to join an innovative, fast-paced organization with an employee focused culture and put their mark on something meaningful. This individual will be responsible for scaling up small volume to medium volume projects and developing a manufacturable process during this scale up. This individual will have swiss technicians report directly to them and would be responsible for the work of the group. They would be responsible for creating programs using Esprit and or Solidcam and planning and ordering all materials and tooling necessary for small batch runs done in the lab. They would also coordinate with other engineers in the lab to plan equipment. Assist in transitioning Lightspeed projects to production through the defined PReP process in a small team and collaborative environment. 1st shift: 6am-2pm (Monday-Friday) Responsibilities Set-up and operate CNC Swiss machines. (Citizen L12 and L20) Program new parts and improve existing parts using Esprit or Solidcam software Oversee Lightspeed job ensuring consistent quality is achieved, participate in basic process development on Resonetics technology Mentor and train Swiss technicians Work with customers on new projects Help with equipment setup utilizing loosely defined setup process and basic troubleshooting of Resonetics technology workstations Ability to work under minimal supervision, taking responsibility to complete assigned tasks Document process parameters and project details for each Lightspeed project accurately per Resonetics Quality Systems requirements Good understanding of how to develop processes Update data in Resonetics digital systems for responsibilities as instructed with feedback from Engineering Utilize applicable inspection equipment to perform tight tolerance visual inspection of Lightspeed product for complex parts Read and interpret print specifications on Lightspeed projects, ensure all required visual and geometric measurements are taken and documented per Quality Systems requirements Must ensure assigned tasks are completed within the defined timeline while ensuring safety and quality are never sacrificed Seeks continuous self-improvement, open and willing to accept constructive criticism Provide project guidance and technical skill training for Application Development Technicians Demonstrating and training manufacturing methods to Production operators to support new Resonetics programs Ability to adapt quickly and positively to changing priorities and processes Employee must conduct themselves in a professional and appropriate manner and is responsible for maintaining a high standard of conduct and job performance. Actively participate in continuous improvement activities. Other duties as assigned. Required Qualifications 4+ years of Citizen swiss set up or similar 4+ years of programming experience using Esprit and or Solid Cam 2+ years' Experience leading small groups High School diploma or Equivalent Ability to create job related documentation for quality purposes Ability to read and understand engineering drawings per GD&T system Strong communication and organizational skills Preferred Qualifications Prior experience and/or training in production setting and comparable manufacturing preferred. Proven understanding of tooling requirements to setup and operate CNC Swiss machines, including pre-setting of tools. Ability to read and edit programs. Familiarity with ISO Quality System, particularly in medical device manufacturing. Ability to read and understand blueprints and specifications. Srong math background, preferable in machine math/shop math. Ability to apply software used on high precision manufacturing equipment (G-code). Familiarity with ISO certified Quality Systems, particularly in medical device manufacturing Basic understanding of materials science and materials properties, especially for common medical device materials (Nitinol, Stainless Steels, Titanium & other metals, Medical Polymers and Ceramics) Ability to create and troubleshoot programs for inspection devices and other auxiliary equipment Ability to generate drawings and models with 2D & 3D software using GD&T (Solidworks). Compensation The compensation for this role is competitive and will be based on experience and qualifications. The anticipated range is $30-40/hr For temp, temp-to-hire, and regular full-time positions, our company policy is that we are unable to provide visa sponsorship. Candidates must already be legally authorized to work in the United States without the need for sponsorship now or in the future.

Responsible for supporting the Specials milling and grinding cells to ensure machines run efficiently during setups and breaks. This includes operating a cell of various mills and grinders to produce precision metal parts of different sizes and shapes within the Specials area of the Press Brake Division (Bending). Machinists at Wilson Tool set up, operate, and adjust machines to perform a wide range of machining operations with a strong emphasis on precision, efficiency, and quality. This role works extensively with state-of-the-art grinding technology engineered for exceptional accuracy and repeatability. The grinder's advanced controls and precision capabilities enable operators to consistently achieve tolerances within 0.0001 of an inch, delivering superior surface finishes and dimensional accuracy. Operators will leverage this technology to optimize throughput, maintain part integrity, and uphold the high standards of Wilson Tool craftsmanship. PRIMARY DUTIES AND RESPONSIBILITIES Operates machines according to the following process: Inspect and set up machines manually or using small hand tools Inspect and change fixtures as necessary Place piece/part into fixture/machine Set dials, switches, and programs to begin process Monitor machine performance and make adjustments as needed to maintain precision and quality Remove part from machine when complete and inspect for accuracy and finish Repeat the above steps until the job is finished, or move on to another machine as assigned Support the grinding cell's continuous improvement efforts by maintaining optimal setups and machine readiness Other duties as assigned by supervisor QUALIFICATIONS Graduate with a 2-year Machine Tool Technology or Tool and Die degree, OR 2nd-year Machine Tool Technology and Tool and Die students. Strong mechanical and technical abilities/experience required. Ability to edit programs and set up multiple machine styles, with a solid understanding of G&M Codes. Willingness to move freely among all cell machines as workload demands. Ability to read and interpret technical data such as blueprints and routings. Strong understanding of machine tooling mathematics, including trigonometry and algebra. Experience or familiarity with precision grinding equipment and high-tolerance manufacturing preferred. PHYSICAL DEMANDS The physical demands and work environment described here are representative of those that must be met by the employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently able to lift or move up to 35 lbs. Occasionally able to lift or move up to 50 lbs. Continuous exposure to indoor manufacturing environment Occasional exposure to chemicals and/or fumes Continuous exposure to moderate noise Continuously stand and walk throughout the workday Frequently reach with hands and arms; use hands to manipulate, handle, or feel material Continuous use hands/fingers to grasp, pinch, pull, feel, or handle and manipulate parts and tools Frequent repetitive motions Continuous requirement of specific vision abilities including close vision, distance vision, color vision, depth perception, and ability to focus. Continuously wear eye protection (Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required). Definitions: Continuous Frequent Occasional (5-8 hrs./shift) (2-5 hrs./shift) (Up to 2 hrs./shift) JOB COMPETENCIES Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace. Accountability - Ability to accept responsibility and account for his/her actions. Adaptability - Ability to adapt to change in the workplace. Motivation - Ability to inspire oneself and others to reach a goal and/or perform to the best of their ability. Communication - Ability to communicate effectively with others using the spoken word and writing clearly and concisely. Team Player - Ability to get along well with a variety of personalities and individuals and work well in a team environment. Ability to recognize and show consideration for others. Problem Solving/Innovative - Ability to find a creative solution for or to deal proactively with work-related problems. Reliability - The trait of being dependable and trustworthy. Time Management - Ability to utilize the available time to organize and complete work within given deadlines. WORK ENVIRONMENT: Inside, manufacturing environment WORK SCHEDULE: Full-time, 3rd Shift, Monday - Friday 11pm - 3:am COMPENSATION: DOE, Machinist pay scale + shift differential Wilson Tool is an EEO/AA employer: women, minorities, the disabled, and veterans are encourages to apply. EEO is the Law: EEOC **************************

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Milling CNC Machinist Position Summary The Milling CNC Machinist operates CNC machines to support the manufacture of components and devices for the medical device industry. Shifts Available: 2nd Monday - Thursday 4:00pm - 2:00am Responsibilities Milling CNC Machinist Duties and Responsibilities * Operate Milling CNC machines * Perform quality inspection on completed parts * Perform preventative maintenance on Milling CNC machines to ensure consistent machine performance * Complete tool changes Qualifications Milling CNC Machinist Position Requirements * Operator experience with Milling CNC machines * Strong math background, preferable in machine math/shop math * Understanding of Geometric Dimensioning and Tolerancing (GD&T) * Ability to read and interpret blueprints * Experience using a microscope * Ability to read measurement equipment such as micrometer, caliper, pressure micrometer Milling CNC Machinist Preferred Knowledge, Skills and Abilities * Machining experience with medical components, devices, or instruments * Previous experience with tight tolerances * Programming experience with Milling CNC Machines * Experience with set-up on Milling CNC Machines * Experience in troubleshooting of Milling CNC Machines rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k)-retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $21.20 - USD $36.49 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

1st Shift Monday - Friday The Prototype CNC Machinist is responsible for engineering, manufacturing, and fabricating new parts, retrofitting and repairing parts per prints or samples, in order to create a product according to customer specifications. Primary Responsibilities: Engineer the appropriate machining process using experience, guidance from the project manager/department lead, and company established procedures and "best practices". Program, set up and machine parts from billet and plate materials. Establish design competency with Fusion 360 and/or PowerShape and programming competency with Fusion 360 and/or PowerMill. Design & build machining fixtures via CAD for the secondary machining of castings or billet/raw stock materials as necessary. Program machining parts (via CAM). Set-up tooling and CNC machines for secondary machining operations on prototype castings and billet/raw stock material. Run set-up parts through each operation and work with quality to gain buyoff at each phase. Run the balance of parts on order through the machining operations. Deburring, cleaning, and packaging of parts for shipment. Teardown of tooling and fixtures and cleaning of the mills. Assist in machining of production tooling components as necessary. Other Job Duties: Ensure jobs are completed efficiently and in a timely manner, consistent with the quoted hours and materials for the job. Communicate delivery updates and potential delays with the Project Manager including if a job will run over or cannot be completed within the time allotted. Meet frequently (at least biweekly) with department lead to address any concerns and/or pass on concerns to management. This may include: machine availability, material resources, tools or tooling, quality, design, work flow, and man power needs and availability. Actively participate in the material management system. (Kan-ban cards) Work with quality to ensure job requirements are met. Ensure clean & safe workplace. Other jobs and duties as assigned by supervisors or management. Adhere to the rules and conventions established by the Machining Work Instruction. Minimum Education: trade school and 2 years of experience or equivalent. Preferred Education: A relevant 2-year technical or equivalent degree Minimum Skills/Experience: one year in similar position, mechanical aptitude, effective computer use, basic Math skills, independent decision-making, and effective self-management. Preferred Skills/Experience: Above plus - Strong Computer and math skills, and three or more years of relevant experience gained through on the job instruction, apprenticeship programs, and increasingly more complex assignments, strong mechanical aptitude as demonstrated through success at increasingly more complex assignments. The Company: Craft, based in Montrose, MN, is a rapid prototyping and complex metal and plastics component manufacturer. Craft has over 30 years of industry experience and has established itself, along with its skilled employees, as a leader in delivering high-quality parts to customers. Le Sueur Incorporated("LSI"), a portfolio company of Delos Capital, and a leading supplier of complex aluminum castings, machined castings, and plastic injection molded components.

Job Description Dahlquist Machine Dahlquist Machine by Fathom is the premier precision machining company in America with over 30 state-of-the-art CNC mills and lathes paired with over 50 years of industry experience. Centrally located in a northern suburb of Minneapolis, Dahlquist Machine produces high-quality products with 100% on-time delivery-specializing in short- to medium-run quantities for high precision light metals, aluminum, and plastic parts. Fathom Manufacturing Fathom is one of the largest digital manufacturing platforms offering on-demand manufacturing in North America. With more than 90 large-platform industrial-grade 3D printing machines and a national footprint with more than 500,000 square feet of manufacturing capacity across 12 facilities, Fathom seamlessly blends in-house capabilities across plastic and metal additive technologies, CNC machining, injection molding & tooling, urethane casting, sheet metal fabrication, and design and engineering. Turning Machinist Position Summary: The CNC Turning Machinist plays a critical role in producing high-quality, intricate parts within a dynamic, fast-paced manufacturing environment. This position requires proficiency in setting up and operating CNC turning machine centers-specifically Doosan and DMG Mori with twin-spindle capabilities-alongside MDI (Manual Data Input) programming and precise manual inspection techniques. By leveraging strong problem-solving skills and close attention to detail, the Machinist will work with diverse materials (aluminum, plastic, and steel), troubleshoot issues, and drive continuous improvement throughout the machining process. By collaborating with cross-functional teams and maintaining clear communication across shifts, the CNC Turning Machinist ensures all parts meet Dahlquist Machine by Fathom's rigorous quality standards and on-time delivery commitments. This role demands the ability to make critical decisions under pressure, a commitment to safe work practices, and adherence to company EH&S policies. Through expert technical knowledge and dedication to efficiency, the CNC Turning Machinist contributes to Dahlquist Machine by Fathom's growth and aligns with Fathom's on-demand manufacturing vision. Key Responsibilities: Set up and operate CNC turning machine centers (Doosan and DMG Mori) with twin-spindle capabilities, live tooling, and bar feeders Perform MDI (Manual Data Input) programming for efficient part production Conduct manual inspections using gauges and instruments to verify part quality prior to CMM inspection Interpret complex 2D drawings, applying GD&T principles Monitor parts throughout the machining process to ensure accuracy and consistency Adhere to company quality and safety procedures Communicate and collaborate with team members to troubleshoot issues and optimize performance Participate in Lean manufacturing events to drive process improvements Qualifications/Requirements: Associate degree in a relevant field, or 3+ years of experience in milling, or 5+ years of overall CNC machining experience Familiarity with Doosan or DMG machines preferred Experience with various materials, such as aluminum, plastic, and steel Ability to read and interpret blueprints Proficiency in manual inspection using gauges and instruments in support of CMM inspection Strong work ethic and attention to detail Ability to thrive in a fast-paced, team-oriented environment Capable of handling sensitive and confidential information Good communication skills for effective teamwork Hours: 5:45a.m. - 3:45 p.m. Monday - Thursday Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

MultiSource Manufacturing LLC is a customer-focused contract manufacturer working to provide high quality engineering and fabrication services. We strive to be a comprehensive resource for all the services you need from hands-on project management to industry standardized installation. For precision machining to complete assembly, MultiSource is your one-stop-shop for quality, efficiency, and excellence in manufacturing. JOB DESCRIPTION: Sets-up, operates, and verifies the quality of work on a wide variety of CNC Milling machines involving close tolerances and difficult set-ups. Performs routine or repetitive operations in a manner which will consistently meet quality requirements and production standards. Actively participates in continuous improvement activities. SCHEDULE: 1st shift; Monday-Friday, 7:00am-3:30pm OR 2nd shift; Monday - Thursday,3:30pm to 2:00am. ESSENTIAL FUNCTIONS AND BASIC DUTIES: * Monitors variations in sequence, e.g., positioning, cycle time, etc., and makes necessary corrections. * Performs repeat set-ups without supervision. May perform more complex set-ups with supervision. * Works from drawings and/or specifications with direction from the Team Leader. * Troubleshoots routine jobs without supervision and more complex jobs with supervision. * Runs production and deburrs parts as required. * Studies specifications, blueprint, drawings or sample prototypes to determine dimensions and tolerances of finished parts. * Select and align tooling, fixtures and attachments for machining. * Adjust machine to produce a conforming product. * Perform in-process inspection of own work while running machine. * Complete required paperwork and keep material and paperwork organized. * Maintains work area in a neat and orderly condition. Works safely, and complies with all established safety rules and work practices. * Maintain and care for all shop tools, machines and equipment. * Conform to the company quality system as documented. QUALIFICATIONS: * EDUCATION/CERTIFICATION: High school education or equivalent, plus at least 2 years of Vo-Tech training in machine tool technology or a related area or equivalent. * EXPERIENCE REQUIRED: At least 5 to 7 years of Mill machine set-up and operating experience in a job shop environment. * PHYSICAL STRENGTH: Lift up to 40 pounds. * LANGUAGE ABILITY: Ability to understand and follow instructions in English. * SKILLS ABILITIES: Very strong mechanical aptitude and problem-solving skills. * REQUIRED KNOWLEDGE: Ability to read blueprints and use measuring instruments. BENEFITS AND COMPENSTION: MultiSource Manufacturing LLC offers competitive salaries and benefits - many benefits begin the first of the month after 30 days of employment. Benefits include: medical, dental, vision, life insurance, 401(k), paid time off, and much more!

Operate computer numerical control (CNC) machines, including mills and lathes, to fabricate precision parts. This role requires interpreting part drawings or job instructions, executing setups, fabricating components, and performing inspections with accuracy and efficiency. The machinist must be capable of independently handling all setups, understanding machine controls, and conducting basic programming. Essential Functions: Fabricate parts in strict accordance with engineering drawings and specifications. Meet or exceed standard job time requirements whenever possible. Independently set up machines and execute machining operations efficiently. Troubleshoot issues related to machine controls and part programs. Employees will receive on-the-job training and be certified to operate a forklift as part of their role. Conduct secondary operations such as drilling, tapping, and deburring. Complete all job paperwork and inspection reports accurately and thoroughly. Maintain a clean, safe, and organized work environment. Non-Essential Functions: Represent the company in a positive and professional manner. Assist with miscellaneous shop duties as needed. Perform other tasks as assigned by management. Minimum Qualifications: Proficient in understanding and following written and verbal instructions in English. Two years of post-secondary education focused on machine tool technology or equivalent hands-on experience in CNC machining. Physical Demands: Must be able to lift 50 lbs. or more repeatedly and frequently throughout the shift (8-10-hour day) Stand for the entire duration of the shift Basic Tool Requirements: (Must supply own tools as listed below) Lathe-Specific Required Tools: Lockable toolbox Digital caliper 12" adjustable wrench (crescent) Ball-end Allen wrench set (Metric & Standard) 0-1" micrometer Dead blow hammer Screwdriver set Socket set, 3/8" drive (1/4" to 1") Standard wrenches (3/8" to 1-1/4") Vise grip pliers This does not list all the duties of the job. You may be asked by supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this . The employer has the right to revise this at any time. This job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason. Fedtech Inc. is an Equal Opportunity Employer dedicated to fostering an inclusive and diverse workplace. We welcome all qualified applicants and consider candidates for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Job Posted by ApplicantPro