Computer numerical controller machinist jobs in Edina, MN - 387 jobs

This position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, setup and operate equipment, and perform visual and dimensional inspections on machined components. Essential Functions * Must be knowledgeable of, and adhere to, the TOMZ Quality Management System. * Ability to operate and maintain production on equipment within the department. Ex. include Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, Willemin Mill turns, various 3-4-5 axis mills, Anodize/Passivation Lines. * Demonstrated ability to perform offsets and change tools to maintain efficient production with minimal support. * Ability to efficiently set up complex legacy components and complex new production orders and ensure the machine is ready for steady production. * Perform visual and dimensional inspections on manufactured components, as required using microscope, micrometer, caliper, pin gages, thread gages, comparator, micro-hite, CMM, vision system, etc. * Regularly and as prescribed, perform preventive maintenance of equipment. * Lead and train on problem solving activities for complex machine or process issues. * Completes and compiles necessary documentation related to Quality Inspection standards. * Ensure proper material control, identification and traceability is maintained for conforming and nonconforming material through the manufacturing processes. * Lead and train on Quality Best Practices and GDP/GMP continuous improvement efforts. * Utilize and navigate ERP and QMS systems to ensure inspection and traceability activities are properly documented and controlled, as needed. * Fit and assemble parts into complex assemblies when required. * Perform Zeiss (or similar) CMM Gage R&R activities for NPI. * Perform all AQL data needed when running production with all data entered to the ERP system. * Perform Qualification runs on NPI to the customers specifications. * Perform 1st article inspection with minimal support. * Provide guidance and training to Machinists level I, II & III. * Perform FANUC (or similar) robot adjustments on basic programs. * Must maintain safe working conditions and follow occupational Safety and Health requirements including Personal Protective Equipment (PPE) guidance and rules. * Other duties and responsibilities are assigned. Qualifications: Education * Certification from a Machine trades technical school program, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred). Experience * Certification from a Machine trades technical school program and ten years relevant work experience in a regulated medical manufacturing environment, or fifteen years in a regulated medical manufacturing environment. Qualifications * Class I, II and/or III Medical Device manufacturing experience. * Knowledge of and experience with GMP/ISO standards. * Advanced understanding of the usage and care of mechanical equipment and inspection processes. * Ability to use hand-held tools to perform preventive maintenance or repair activities and install or change tools. * Experience editing programs through machine controls. * "Hands-on" self-starter with ability to work both independently and as part of a team. * Ability to effectively read and understand blueprints, specifications, GD&T, and procedures. * Maintains accuracy and attention to detail at all times and completes tasks in a timely manner. * Ability to work with a variety of functional areas, including R&D, Manufacturing, and QA, as required, accomplishing results with minimal guidance. Preferred Skills * Intermediate skills with Microsoft Excel and Word * Strong verbal and written English language communication skills. Pay Range: $30 - $38 an hour

Job DescriptionTOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485. Summary of Position: Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within the Swiss machining department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment. Essential Functions: Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills. Perform offsets and tool changes to ensure efficient production with minimal support. Set up complex legacy components and new production orders for steady machine operation. Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. Perform scheduled and regular preventive maintenance on equipment. Drive problem-solving activities for complex machine or process issues. Complete and compile documentation related to quality inspection standards. Ensure proper material control, identification, and traceability for conforming and nonconforming materials. Support Quality Best Practices and contribute to continuous improvement in GDP/GMP. Capable of mentoring and training lower-level machinists. Facilitate a continuous improvement in culture and ensure quality and delivery objectives are met. Utilize ERP and QMS systems to document and control inspection and traceability activities. Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. Adhere to the TOMZ Quality Management System. Perform other duties as assigned. Qualifications: Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials. Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive. Knowledge of and experience with GMP/ISO standards. A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance. Advanced understanding of mechanical equipment usage, care, and inspection processes. Ability to use hand-held tools for preventive maintenance, repairs, and tool changes. Skilled in reading and understanding of blueprints, specifications, and procedures. Detail-oriented with the ability to maintain accuracy and complete tasks promptly. Proficient in identifying nonconformances and maintaining organization. Intermediate skills in GD&T. Education: Certification from a technical school program or equivalent, directly transferable work experience in a manufacturing or engineering discipline may be accepted. Certification from a technical school program is strongly preferred. Experience: Minimum of 3-7 years' experience in a regulated manufacturing environment. Preferred Skills: Strong verbal and written English language communication skills. Physical Requirements: Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead. 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products. Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required. Ability to sit or stand for prolonged periods. WEEKEND SHIFT: 20% DIFFERENTIAL 5AM-5PM FRI-SUN 2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM 1st shift- No differential Pay range: $31.00-$37.00 #SJ24

Job Title: 2nd Shift CNC Machinist - Direct Hire Compensation: $28.00-$38.00 per hour (DOQ) Schedule: 2nd Shift | Monday-Thursday | 4:00pm-2:30am Job Type: Direct Hire | Full-time About the OpportunityDoherty Staffing Solutions is hiring a 2nd Shift CNC Machinist for a metal manufacturing / die casting company in Minneapolis, MN. In this role, you'll support efficient production by setting up, troubleshooting, and optimizing CNC and dedicated equipment in a team-focused manufacturing environment. This opportunity offers career growth, competitive pay, and strong benefits-including employee ownership-for motivated machinists looking to take the next step in their career.What You'll Do as a 2nd Shift CNC Machinist: Set up, operate, and tear down CNC and dedicated equipment using approved processes Troubleshoot equipment, programs, and tooling issues to minimize downtime Edit and adjust CNC programs, offsets, and tool changes in collaboration with Engineering Read and interpret prints, SPC data, CMM results, and GD&T specifications Support process improvements, DOEs, and new project development Perform daily production work to ensure parts meet quality and accuracy standards Provide leadership and direction when the supervisor is unavailable What You Need to Bring to the 2nd Shift CNC Machinist Role: 3-5 years of CNC machining experience in a machine shop or similar environment Strong skills in CNC setup, troubleshooting, and program editing Ability to read blueprints and interpret GD&T Experience analyzing inspection data (CMM, SPC, process studies) Vocational or technical training in precision machining preferred Ability to work independently and support team goals Reliable transportation to the Minneapolis facility Ability to follow all safety, environmental, and quality requirements #metrocareers Pay and Benefits: Competitive hourly pay with weekly paychecks Employee Stock Ownership Plan (ESOP) 401(k) with company match Paid holidays and vacation Individual Coverage Health Reimbursement Account (ICHRA) Vision and dental insurance Short- and long-term disability and life insurance Ready to Apply?Click Apply Now to complete our quick, mobile-friendly application. If you have questions about the 2nd Shift CNC Machinist role, contact your local Doherty Staffing Solutions office for more information at 952-832-3576 or janderson@doherty.com.

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** CNC Machinist Position Summary The CNC Machinist operates CNC machines to support the manufacture of components and devices for the medical device industry. Shifts Available: 4th Shift Friday - Sunday 5am - 5pm Sign-On Bonus Available: $1,000-$5,000 dependent on level of experience! Responsibilities CNC Machinist Duties and Responsibilities Operate milling & lathe CNC machines Perform quality inspection on completed parts Perform preventative maintenance on milling & lathe CNC machines to ensure consistent machine performance Complete tool changes Qualifications CNC Machinist Position Requirements Operator experience with milling or lathe CNC machines Strong math background, preferable in machine math/shop math Understanding of Geometric Dimensioning and Tolerancing (GD&T) Ability to read and interpret blueprints Experience using a microscope Ability to read measurement equipment such as micrometer, caliper, pressure micrometer CNC Machinist Preferred Knowledge, Skills and Abilities Machining experience with medical components, devices, or instruments Previous experience with tight tolerances Programming experience with Milling CNC Machines Experience with set-up on Milling CNC Machines Experience in troubleshooting of Milling CNC Machines rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: Onsite Clinic Paid Parental Leave Monthly Social Events Annual Employee Appreciation Week Volunteer Opportunities Training and Development Opportunities Tuition Reimbursement Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $21.20 - USD $36.49 /Hr. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485. Summary of Position: Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment. Essential Functions: Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills.- Perform offsets and tool changes to ensure efficient production with minimal support. Set up legacy components and new production orders for steady machine operation.- Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. Perform scheduled and regular preventive maintenance on equipment. Drive problem-solving activities for complex machine or process issues. Complete and compile documentation related to quality inspection standards. Ensure proper material control, identification, and traceability for conforming and nonconforming materials. Support Quality Best Practices and contribute to continuous improvement in GDP/GMP. Utilize ERP and QMS systems to document and control inspection and traceability activities. Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. Adhere to the TOMZ Quality Management System. Perform other duties as assigned. Qualifications: Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials. Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive. Knowledge of and experience with GMP/ISO standards. A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with guidance. Understanding of mechanical equipment usage, care, and inspection processes. Ability to use hand-held tools for preventive maintenance, repairs, and tool changes. Effectively read and understand blueprints, specifications and procedures. Understanding of GD&T. Detail-oriented with the ability to maintain accuracy and complete tasks promptly. Identify nonconformances and maintain organization. Education: High school diploma, GED, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred). Certification from a technical school program preferred. Experience: Minimum of 2-5 years' experience in a regulated manufacturing environment. Preferred Skills: Strong verbal and written English language communication skills. Physical Requirements: Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead. 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products. Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required. Ability to sit or stand for prolonged periods. WEEKEND SHIFT: 20% DIFFERENTIAL 5AM-5PM FRI-SUN 2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM 1st shift- No differential Pay range: $23.50 - $30.50 Machines & technologies you'll use: CNC Mill (3-4 axis VMC) CNC Swiss Lathe (Citizen, Tsugami, Index) CNC Mill (5+ axis VMC)

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description DUTIES AND RESPONSIBILITIES: Operate Hurco CNC vertical machines using conversational programming and NC code generated from CAM software. Work effectively in a fast-paced, short-run style production environment with frequent part changes. Program new jobs while current parts are running to maximize machine utilization and throughput. Confirm machine and job assignments with leadership at the beginning of each shift or job. Produce precision parts to customer specifications and within acceptable production timeframes. Follow and execute all written and verbal instructions from documentation, including Shop Travelers, Inspection Sheets, blueprints, and work orders. Perform and document in-process inspections to ensure product quality. Communicate promptly with Quality Control, Supervisor, or Plant Manager regarding any part issues, non-conformances, or concerns. Unload and package finished parts according to JBT Machining and customer requirements. Maintain accurate daily records of job activities including quantities, run times, and scrap data in both Shop Travelers and the ERP system. Perform required preventative maintenance on assigned equipment; monitor machines for abnormal conditions and report issues to maintenance or leadership. Maintain a clean, organized, and safe work area in compliance with 5S procedures and JBT Machining Safety Policies. Use appropriate Personal Protective Equipment (PPE) and adhere to all company safety protocols. Maintain all required documentation in an accurate and timely manner. Perform other duties as assigned by supervisors or management. KNOWLEDGE, SKILLS AND ABILITIES: Gibbs or Hurco Conversational experience preferred. 3axis and 4axis vertical mill experience preferred. Experience working in a fast-paced environment. Problem-solving and attention to detail. The ability to multitask on a wide variety of projects. Candidates must support and promote our Cultural Tenets; Do the Right Thing, Trust, Put the Team First, Accountability, Collaboration, Communication, Clarity on Reality and Feedback. Contact us directly for a tour of our top-notch, environmentally controlled facility! Here's what we can offer: Medical, Dental, and Vision after 60 days of employment Competitive Wellness Program, providing up to 100% discount on medical premiums Short-Term and Long-Term Disability Supplemental Accident Insurance through Allstate for additional coverage on accidents + cancer Employer-Paid Life Insurance 401(k) after 60 days of employment + competitive match after one year Paid Time Off starting after 90 days of employment Paid Holidays starting day one! Health Savings Account and Flexible Spending Account Great discount programs in automotive, technology, and more Education Assistance is available for job-related courses to further your education, with up to 100% paid tuition for maintenance-related coursework and certifications Career Advancement Opportunities Teammate Assistance Program (TAP), which offers professional assistance for Counseling, Financial, Legal, and Family services Wage Range: $22.00 - $31.00/hour Shift: 1st (Monday-Thursday: 6am-4:30pm, Friday: 6am-11am) JBT Machining is a safety- sensitive workplace. All employment offers are contingent upon results of a 10-panel drug screening including marijuana. JBT Machining is an equal opportunity employer and considers all qualified applicants without regard to any classification protected by federal, state and/or local law.

Full-time Description At UMC, we don't just make products - we innovate, solve problems, and build a better future. As a proud, privately owned second-generation manufacturer, we've earned our reputation as leaders in our industry by producing highly complex parts with precision and ingenuity. What sets us apart? Our people. We're a passionate team that values collaboration, continuous learning, and going above and beyond. If this sounds like your kind of workplace, keep reading! Why UMC? Generous PTO: Start with 3 weeks of paid time off per year, with accrual starting on day one. Comprehensive Benefits: Medical, dental, vision, short- and long-term disability, and paid holidays. Competivie Pay: The position includes a 20% shift differential and an annual $3,000.00 retention bonus. 401k Match: Dollar-for-dollar matching up to 5%. Professional Growth: Tuition reimbursement for professional development. Work Schedule: Friday-Sunday, 4:00 am-4:30 pm or 5:00am-5:30pm, onsite in Monticello, MN. About the Role As a Swiss CNC Machinist, you will play a key role in the daily operation and setup of Swiss CNC machines, ensuring quality, precision, and efficiency in our manufacturing processes. You will be responsible for meeting production goals, troubleshooting processes, and maintaining a safe, high-performing work environment. If you enjoy working with cutting-edge technology, solving problems, continuously improving processes, and are aligned with our core values- Great People, Going Beyond, and Growing -we would love to have you join our team. What You'll Do Independently set up and operate machines for various jobs, ensuring adherence to company quality standards and production efficiency. While seeking assistance from a supervisor or senior machinist for advanced setups, as needed. Troubleshoot production issues with support from Senior Machinist, Supervisors, and Engineers to ensure smooth production flow. Conducted in-process inspections of machined products, documenting results to ensure products met specifications. Assist Junior Machinists and Production Operators in diagnosing and resolving technical issues that arise during machining operations, to enhance team competency and flexibility. Maintain a safe working environment, upholding a proactive safety culture by identifying and addressing potential hazards. Requirements Education and Experience: Associates degree in Machining or related field or work experience in place of education. 2+ years' experience as a machinist Citizen or Star Swiss Machining experience preferred. Skills and Competencies: Ability to express ideas, share information, listen actively, and demonstrate professionalism in written and verbal communication. Able to read and interpret blueprints, use simple math to perform basic calculations, and use hand-held measuring tools. Basic knowledge of CMM, VCMM, and GD&T. Promotes a sense of urgency to expedite work through area while maintaining quality standards. Strong mechanical aptitude. Excellent attention to detail and problem-solving skills. Able to make effective and timely decisions. Ability to work independently and as part of a team. Able to work efficiently with minimal supervision. Embodies the personal commitment to the shared core values of UMC: Great People, Going Beyond, and Growing. Culture Fit: You're a team player who thrives on collaboration. You bring a growth mindset and embrace challenges with grit. You care deeply about delivering excellence and going beyond expectations. Ready to Join a Winning Team? If you're passionate about building relationships, solving problems, and contributing to a culture of innovation, UMC is the place for you. Let's grow together - apply today and make an impact! UMC is an Equal Employment Opportunity Employer Salary Description $31.82-$47.10/hour Differential Included

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Milling CNC Machinist Position Summary The Milling CNC Machinist operates CNC machines to support the manufacture of components and devices for the medical device industry. Shifts Available: 2nd Monday - Thursday 4:00pm - 2:00am Responsibilities Milling CNC Machinist Duties and Responsibilities * Operate Milling CNC machines * Perform quality inspection on completed parts * Perform preventative maintenance on Milling CNC machines to ensure consistent machine performance * Complete tool changes Qualifications Milling CNC Machinist Position Requirements * Operator experience with Milling CNC machines * Strong math background, preferable in machine math/shop math * Understanding of Geometric Dimensioning and Tolerancing (GD&T) * Ability to read and interpret blueprints * Experience using a microscope * Ability to read measurement equipment such as micrometer, caliper, pressure micrometer Milling CNC Machinist Preferred Knowledge, Skills and Abilities * Machining experience with medical components, devices, or instruments * Previous experience with tight tolerances * Programming experience with Milling CNC Machines * Experience with set-up on Milling CNC Machines * Experience in troubleshooting of Milling CNC Machines rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k)-retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $21.20 - USD $36.49 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Resonetics, the world leader in micro manufacturing for the life sciences industry, is changing the industry and elevating the customer experience resulting in rapid growth domestically and internationally. This is a phenomenal opportunity to join an innovative, fast-paced organization with an employee focused culture and put their mark on something meaningful. This individual will be responsible for scaling up small volume to medium volume projects and developing a manufacturable process during this scale up. This individual will have swiss technicians report directly to them and would be responsible for the work of the group. They would be responsible for creating programs using Esprit and or Solidcam and planning and ordering all materials and tooling necessary for small batch runs done in the lab. They would also coordinate with other engineers in the lab to plan equipment. Assist in transitioning Lightspeed projects to production through the defined PReP process in a small team and collaborative environment. 1st shift: 6am-2pm (Monday-Friday) Responsibilities Set-up and operate CNC Swiss machines. (Citizen L12 and L20) Program new parts and improve existing parts using Esprit or Solidcam software Oversee Lightspeed job ensuring consistent quality is achieved, participate in basic process development on Resonetics technology Mentor and train Swiss technicians Work with customers on new projects Help with equipment setup utilizing loosely defined setup process and basic troubleshooting of Resonetics technology workstations Ability to work under minimal supervision, taking responsibility to complete assigned tasks Document process parameters and project details for each Lightspeed project accurately per Resonetics Quality Systems requirements Good understanding of how to develop processes Update data in Resonetics digital systems for responsibilities as instructed with feedback from Engineering Utilize applicable inspection equipment to perform tight tolerance visual inspection of Lightspeed product for complex parts Read and interpret print specifications on Lightspeed projects, ensure all required visual and geometric measurements are taken and documented per Quality Systems requirements Must ensure assigned tasks are completed within the defined timeline while ensuring safety and quality are never sacrificed Seeks continuous self-improvement, open and willing to accept constructive criticism Provide project guidance and technical skill training for Application Development Technicians Demonstrating and training manufacturing methods to Production operators to support new Resonetics programs Ability to adapt quickly and positively to changing priorities and processes Employee must conduct themselves in a professional and appropriate manner and is responsible for maintaining a high standard of conduct and job performance. Actively participate in continuous improvement activities. Other duties as assigned. Required Qualifications 4+ years of Citizen swiss set up or similar 4+ years of programming experience using Esprit and or Solid Cam 2+ years' Experience leading small groups High School diploma or Equivalent Ability to create job related documentation for quality purposes Ability to read and understand engineering drawings per GD&T system Strong communication and organizational skills Preferred Qualifications Prior experience and/or training in production setting and comparable manufacturing preferred. Proven understanding of tooling requirements to setup and operate CNC Swiss machines, including pre-setting of tools. Ability to read and edit programs. Familiarity with ISO Quality System, particularly in medical device manufacturing. Ability to read and understand blueprints and specifications. Srong math background, preferable in machine math/shop math. Ability to apply software used on high precision manufacturing equipment (G-code). Familiarity with ISO certified Quality Systems, particularly in medical device manufacturing Basic understanding of materials science and materials properties, especially for common medical device materials (Nitinol, Stainless Steels, Titanium & other metals, Medical Polymers and Ceramics) Ability to create and troubleshoot programs for inspection devices and other auxiliary equipment Ability to generate drawings and models with 2D & 3D software using GD&T (Solidworks). Compensation The compensation for this role is competitive and will be based on experience and qualifications. The anticipated range is $30-40/hr For temp, temp-to-hire, and regular full-time positions, our company policy is that we are unable to provide visa sponsorship. Candidates must already be legally authorized to work in the United States without the need for sponsorship now or in the future.

Kurt Manufacturing is seeking a CNC Machinist II - Milling to join our team at our Machining Division. The CNC Machinist II is responsible for setting up, adjusting, and operating numerically controlled machine tools. This role involves performing a series of progressive machining operations on repetitive workpieces, ensuring close and exacting tolerances and finish specifications. 2nd Shift: 4:30 p.m. - 3:00 a.m. Monday - Thursday; 2:30 p.m. - 10:30 p.m. Friday Shift Differential: Second shift employees are eligible for a 20% shift differential. Compensation The anticipated starting pay range for this position is $29.00 to $37.00. The exact rate may be based on a combination of factors, including knowledge, experience, skills, abilities, and education. Essential Functions Work from programming instructions, operational data and machine set up instructions defining and coding tool arrangements, material clamping methods, machine calibrations and console settings. Check parts for conformance to specifications. Operators may be required to run more than one unit simultaneously Requires a broad knowledge of machining techniques and familiarity with CNC operational procedures. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Reliable attendance is required. Required High School Diploma or GED equivalent 3 years of related experience Ability to perform metric conversions Must be able to read and understand blueprints, specifications, and routings Preferred Associate degree (A.A.) or equivalent from a two-year college or technical school 4 or more years of related experience Benefits Medical, dental, vision plans which are effective on your hire date. Health Care Savings Account (HSA) Employee Stock Ownership Program (ESOP) Company Paid Long-Term Disability (LTD) Paid Parental Leave Paid Bereavement Leave Paid Time Off Paid Holidays Employee Assistance Program Physical Demand Factors The following physical demand factors should be used as a general guideline for employees listed under this job title. Specific requirements will vary based on the employee's individual work responsibilities. Strength Level Rating: Medium work. Work involves exerting 20 to 50 pounds of force occasionally, or 10 to 25 pounds of force frequently, or an amount greater than negligible and up to 10 pounds constantly to move objects. A worker in this job will frequently (from 1/3 to 2/3 of the time): Reach by extending hands and arms Handle objects by seizing, holding, grasping, turning or otherwise working with hands Pick, pinch, or otherwise work primarily with fingers Have near acuity with clarity of vision at 20 inches or less Judge distances and spatial relationships (see objects three-dimensionally) The worker will occasionally (up to 1/3 of the time): Stoop by bending body downward and forward requiring full use of the lower extremities and back muscles Kneel by bending legs at knees to come to rest on knee(s) Crouch by bending body downward and forward by bending legs and spine Perceive attributes of objects, such as size, shape, temperature, or texture by touch Hear by perceiving the nature of sounds by ear Adjust vision to bring objects into sharp focus Identify and distinguish colors

Job Description Dahlquist Machine Dahlquist Machine by Fathom is the premier precision machining company in America with over 30 state-of-the-art CNC mills and lathes paired with over 50 years of industry experience. Centrally located in a northern suburb of Minneapolis, Dahlquist Machine produces high-quality products with 100% on-time delivery-specializing in short- to medium-run quantities for high precision light metals, aluminum, and plastic parts. Fathom Manufacturing Fathom is one of the largest digital manufacturing platforms offering on-demand manufacturing in North America. With more than 90 large-platform industrial-grade 3D printing machines and a national footprint with more than 500,000 square feet of manufacturing capacity across 12 facilities, Fathom seamlessly blends in-house capabilities across plastic and metal additive technologies, CNC machining, injection molding & tooling, urethane casting, sheet metal fabrication, and design and engineering. Turning Machinist Position Summary: The CNC Turning Machinist plays a critical role in producing high-quality, intricate parts within a dynamic, fast-paced manufacturing environment. This position requires proficiency in setting up and operating CNC turning machine centers-specifically Doosan and DMG Mori with twin-spindle capabilities-alongside MDI (Manual Data Input) programming and precise manual inspection techniques. By leveraging strong problem-solving skills and close attention to detail, the Machinist will work with diverse materials (aluminum, plastic, and steel), troubleshoot issues, and drive continuous improvement throughout the machining process. By collaborating with cross-functional teams and maintaining clear communication across shifts, the CNC Turning Machinist ensures all parts meet Dahlquist Machine by Fathom's rigorous quality standards and on-time delivery commitments. This role demands the ability to make critical decisions under pressure, a commitment to safe work practices, and adherence to company EH&S policies. Through expert technical knowledge and dedication to efficiency, the CNC Turning Machinist contributes to Dahlquist Machine by Fathom's growth and aligns with Fathom's on-demand manufacturing vision. Key Responsibilities: Set up and operate CNC turning machine centers (Doosan and DMG Mori) with twin-spindle capabilities, live tooling, and bar feeders Perform MDI (Manual Data Input) programming for efficient part production Conduct manual inspections using gauges and instruments to verify part quality prior to CMM inspection Interpret complex 2D drawings, applying GD&T principles Monitor parts throughout the machining process to ensure accuracy and consistency Adhere to company quality and safety procedures Communicate and collaborate with team members to troubleshoot issues and optimize performance Participate in Lean manufacturing events to drive process improvements Qualifications/Requirements: Associate degree in a relevant field, or 3+ years of experience in milling, or 5+ years of overall CNC machining experience Familiarity with Doosan or DMG machines preferred Experience with various materials, such as aluminum, plastic, and steel Ability to read and interpret blueprints Proficiency in manual inspection using gauges and instruments in support of CMM inspection Strong work ethic and attention to detail Ability to thrive in a fast-paced, team-oriented environment Capable of handling sensitive and confidential information Good communication skills for effective teamwork Hours: 5:45a.m. - 3:45 p.m. Monday - Thursday Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

MultiSource Manufacturing LLC is a customer-focused contract manufacturer working to provide high quality engineering and fabrication services. We strive to be a comprehensive resource for all the services you need from hands-on project management to industry standardized installation. For precision machining to complete assembly, MultiSource is your one-stop-shop for quality, efficiency, and excellence in manufacturing. JOB DESCRIPTION: Sets-up, operates, and verifies the quality of work on a wide variety of CNC Milling machines involving close tolerances and difficult set-ups. Performs routine or repetitive operations in a manner which will consistently meet quality requirements and production standards. Actively participates in continuous improvement activities. SCHEDULE: 1st shift; Monday-Friday, 7:00am-3:30pm OR 2nd shift; Monday - Thursday,3:30pm to 2:00am. ESSENTIAL FUNCTIONS AND BASIC DUTIES: * Monitors variations in sequence, e.g., positioning, cycle time, etc., and makes necessary corrections. * Performs repeat set-ups without supervision. May perform more complex set-ups with supervision. * Works from drawings and/or specifications with direction from the Team Leader. * Troubleshoots routine jobs without supervision and more complex jobs with supervision. * Runs production and deburrs parts as required. * Studies specifications, blueprint, drawings or sample prototypes to determine dimensions and tolerances of finished parts. * Select and align tooling, fixtures and attachments for machining. * Adjust machine to produce a conforming product. * Perform in-process inspection of own work while running machine. * Complete required paperwork and keep material and paperwork organized. * Maintains work area in a neat and orderly condition. Works safely, and complies with all established safety rules and work practices. * Maintain and care for all shop tools, machines and equipment. * Conform to the company quality system as documented. QUALIFICATIONS: * EDUCATION/CERTIFICATION: High school education or equivalent, plus at least 2 years of Vo-Tech training in machine tool technology or a related area or equivalent. * EXPERIENCE REQUIRED: At least 5 to 7 years of Mill machine set-up and operating experience in a job shop environment. * PHYSICAL STRENGTH: Lift up to 40 pounds. * LANGUAGE ABILITY: Ability to understand and follow instructions in English. * SKILLS ABILITIES: Very strong mechanical aptitude and problem-solving skills. * REQUIRED KNOWLEDGE: Ability to read blueprints and use measuring instruments. BENEFITS AND COMPENSTION: MultiSource Manufacturing LLC offers competitive salaries and benefits - many benefits begin the first of the month after 30 days of employment. Benefits include: medical, dental, vision, life insurance, 401(k), paid time off, and much more!

Job Description CNC Lathe and Mill Machinist / 2nd Shift Envision your machining experience at work with an industry leader! Enjoy a supportive and inclusive atmosphere with a wide-ranging benefits package, and excellent job security! For over 70 years, Tolomatic has been a family-owned company and over that time has become an innovative leader in pneumatic and motion control products with a global reach. Take advantage of this opportunity to use your machining skills while working on a variety of made-to-order projects. As a part of the team, you will enjoy: A clean, modern, climate-controlled work environment. Convenient location off Highway 55 offering an easy commute. Starting Pay Range of $23.00 to $36.00 an hour - DOE. Great employee benefits including: Medical, Dental, Disability, Life, PTO, Profit Sharing, 401K Plan, Annual Bonus and Tuition Reimbursement. Real, achievable advancement opportunities. Due to rapid growth, Tolomatic is looking for CNC Lathe and Mill Machinists for our 2nd shift: 2nd Shift hours are 3:25pm to 1:55am Monday-Thursday OR 3:25pm to 11:55pm Monday-Friday ($1.50/hour Shift Premium) Signing bonus available up to $6,000 depending on shift. About You: Ability to set up CNC lathes and mills Two year Machine Tool diploma or degree or equivalent experience (preferred) Assist with fabricating new components per Engineering drawings Ability to verify work using various measurement methods Work on jobs according to due date as provided using scheduling system Report job progress using current scheduling system Working knowledge of GD&T Basic computer skills Primary Objective: Our Machinists setup and operate CNC vertical and horizontal mills and lathes to perform routine or repetitive operations in a manner which consistently meets customer specifications, quality requirements, and production standards. The Company: Tolomatic is a leading supplier of electrical linear actuators and electric linear motion control and pneumatic actuators and cylinders. Tolomatic has earned its industry-wide reputation for designing and manufacturing highly durable and reliable electric linear and pneumatic actuators, and power transmission products for a variety of industries including packaging, material handling, medical, food processing, automotive, semiconductor, and general automation. If you have previous experience as a CNC Lathe and Mill Machinist, we want to hear from you! Do not miss out on this opportunity. Join the Tolomatic team today! All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. Powered by JazzHR 5vqSqXUuA6

Mid Continent Engineering is seeking a CNC Machinist to join our team! This is a 1st Shift- 6 am to 4:30 pm, Monday through Thursday opportunity. Mid-Continent has been a supplier to first-tier OEMs within the medical, aerospace and defense industries for decades. Mid-Continent Engineering stuffs the armed forces supply chain with products of our capabilities such as precision machining, aerospace welding, chromate conversion, paint/powder coat finishing, mechanical assemblies, and other design-assist services. A few things we have to offer: Competitive Wages Medical, Dental & Vision for employee & family including domestic partners. 401k Tuition Reimbursement PTO accrual starts immediately. Yearly shoe allowance Referral Program Summary: This position will be responsible for the set-up, adjustment, and operation of CNC Mill Machines. Use of tools to perform progressive machining operations on a variety of standardized work, having close tolerances and finish requirements. Essential Duties & Responsibilities include the following: The ability to operate and set-up CNC Mill Machines. Analyze drawings, sketches, and design data of parts to determine dimension & configuration of cuts, selection of cutting tools, machine speeds and feed rates. Revise program if needed to eliminate instruction errors or omissions. Use shop equipment, overhead cranes, chains, slings, and forklifts in a safe manner. Communicate with co-workers/supervisors to maintain a safe and positive work environment. Perform other duties, as assigned. Education & Experience: High School Diploma or G.E.D. Prefer a degree from a two-year technical school. 3+ years of CNC Mill Machine or relevant shop experience Programming experience with Surf Cam or Mastercam, is a plus. Ability to read and interpret blueprints, written instructions, and processing. Epicor ERP Software experience is a plus. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use of hands, fingers, feet, and hands to reach with arms. The ability to talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees must be able to cope with Minnesota climate variances, endure heat & cold conditions in the shop. Endure heavy workloads, high noise levels from hammering, and grinding (hearing protection provided). Protect against metal particles, fumes, sparks, particles, and gases (safety glasses, safety-toed boots, ear plugs, and gloves provided per the company policy guidelines). Individuals working in an office setting will not endure some of the physical & work environments conditions of the production floor unless office is adjacent to the production floor or per the individuals job duties and/ or responsibilities. All office personnel must abide by the PPE guidelines (safety glasses, safety-toed boots that are provided per the company policy guidelines) when entering the production floor or if a requirement of a department that individual is entering or working in. 1st Shift- 6 am to 4:30 pm- Monday through Thursday

We are seeking skilled CNC Machinists / Swiss Machinists who are great at problem solving to join an innovative manufacturing team in a dynamic, emerging industry that requires high-precision parts. You will be part of a team, responsible for programming, setting up, and operating CNC machines to produce precision components that meet the highest quality standards. Your expertise will be crucial in maintaining optimal production efficiency and ensuring adherence to safety protocols. Responsibilities Interpret and analyze engineering drawings, blueprints, and specifications to determine machining processes and requirements Program CNC machines using G-code and relevant software, ensuring precision and quality in each component produced Set up and calibrate CNC machinery, including adjusting tooling and fixtures to achieve desired tolerances Monitor machine operations and troubleshoot issues as they arise, implementing corrective measures to maintain production flow Conduct routine maintenance and inspections on CNC equipment to ensure optimal performance and longevity Collaborate with engineering teams to refine processes and improve overall manufacturing efficiency Required and Preferred Qualifications Required: 5+ years of experience as a CNC/Swiss Machinist with a proven track record in precision machining Proficiency in reading and interpreting technical drawings and specifications Strong understanding of G-code programming and CNC machine operation Experience with various types of CNC machines, including lathes and mills Preferred: Certification in CNC/Swiss machining or a related field Experience with CAD/CAM software Knowledge of quality control and inspection techniques Technical Skills and Relevant Technologies Proficient in operating CNC mills, lathes, and other machining equipment Familiarity with CAD software for designing and modifying machining programs Experience with precision measurement tools, such as calipers and micrometers Soft Skills and Cultural Fit Strong attention to detail and commitment to quality Flexible approach to work as the need to adjust and improve processes will be ongoing Effective problem-solving skills and the ability to work independently Excellent communication skills for remote collaboration and team engagement A proactive approach to identifying areas for process improvement Required Skills: Operations Collaboration Process Improvement Machinery Soft Skills Attention To Detail Components Communication Skills Inspection Quality Control Manufacturing Specifications Programming Software Maintenance Engineering Communication

Job Description Mid Continent Engineering is seeking a CNC Machinist to join our team! This is a 1st Shift- 6 am to 4:30 pm, Monday through Thursday opportunity. Mid-Continent has been a supplier to first-tier OEMs within the medical, aerospace and defense industries for decades. Mid-Continent Engineering stuffs the armed forces supply chain with products of our capabilities such as precision machining, aerospace welding, chromate conversion, paint/powder coat finishing, mechanical assemblies, and other design-assist services. A few things we have to offer: Competitive Wages Medical, Dental & Vision for employee & family including domestic partners. 401k Tuition Reimbursement PTO accrual starts immediately. Yearly shoe allowance Referral Program Summary: This position will be responsible for the set-up, adjustment, and operation of CNC Mill Machines. Use of tools to perform progressive machining operations on a variety of standardized work, having close tolerances and finish requirements. Essential Duties & Responsibilities include the following: The ability to operate and set-up CNC Mill Machines. Analyze drawings, sketches, and design data of parts to determine dimension & configuration of cuts, selection of cutting tools, machine speeds and feed rates. Revise program if needed to eliminate instruction errors or omissions. Use shop equipment, overhead cranes, chains, slings, and forklifts in a safe manner. Communicate with co-workers/supervisors to maintain a safe and positive work environment. Perform other duties, as assigned. Education & Experience: High School Diploma or G.E.D. Prefer a degree from a two-year technical school. 3+ years of CNC Mill Machine or relevant shop experience Programming experience with Surf Cam or Mastercam, is a plus. Ability to read and interpret blueprints, written instructions, and processing. Epicor ERP Software experience is a plus. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use of hands, fingers, feet, and hands to reach with arms. The ability to talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees must be able to cope with Minnesota climate variances, endure heat & cold conditions in the shop. Endure heavy workloads, high noise levels from hammering, and grinding (hearing protection provided). Protect against metal particles, fumes, sparks, particles, and gases (safety glasses, safety-toed boots, ear plugs, and gloves provided per the company policy guidelines). Individuals working in an office setting will not endure some of the physical & work environments conditions of the production floor unless office is adjacent to the production floor or per the individuals job duties and/ or responsibilities. All office personnel must abide by the PPE guidelines (safety glasses, safety-toed boots that are provided per the company policy guidelines) when entering the production floor or if a requirement of a department that individual is entering or working in. 1st Shift- 6 am to 4:30 pm- Monday through Thursday

EPTAM Precision Micro-Machining is looking for a Machinist (Swiss) - 1st Shift to join our team in Lakeville, MN . Join us as we create medical devices that support our OEM partners in creating life-saving parts and positive outcomes for their patients. EPTAM Precision Micro-Machining in is a world-class manufacturer specializing in precision manufacturing of custom medical device components for original device manufacturers. We've established a strong reputation in providing custom implantable components across various medical sectors, including orthopedic, orthopedic spine, cardiovascular, vascular, endovascular, and pelvic health sectors. Our manufacturing operations support the Robot Assisted Surgery (RAS) and Minimally Invasive Surgery (MIS) industries, as OEM's look for partners for the future of advanced interventions. Our facility, compliant with FDA and ISO 13485 standards, is celebrated for its high-quality system and standards. Our ingrained culture of quality, combined with seamless collaboration between Engineering, Quality, and Manufacturing Operations, allows us to deliver the very best to our employees, customers, and the world. EPTAM Solutions , our parent company with locations nationwide, is at the Heart of Manufacturing. We recognize our parts touch lives, and our teams assume this responsibility with vigor. Our minds never sleep. Join our incredible team at any one of our locations and reap the benefits of an employee focused company. We excel at what we do for our customers, our employees, and the world. Benefits Include: Professional Development/On the Job Training Health and Wellness Benefits Clean, Friendly, Safe work Environment Recognition and Rewards Program Tuition Re-imbursement Competitive Pay/Merit Increases 401k w/ Company Match Employee Assistance Program (EAP) SHIFT DETAILS: Monday through Friday 6:00am to 2:30pm SUMMARY: The Machinist is primarily responsible for the following: Set up and operate machine tools to produce precision parts and instruments, and support maintenance of machines. Inspect parts to ensure they meet the required tolerances, dimensions, and surface finishes that comply with the customers requirements. ESSENTIAL FUNCTIONS Perform machine setups to produce products, ensuring consistent results through accurate timekeeping, tool monitoring and statistical control methods. Complete independent parts inspections to ensure that customer requirements are being met, using various inspection methods, resources and equipment, including regular use of microscope. · Identify material, technical, production and safety issues that may impact the manufacturing schedule, communicate concerns to the department Lead Knowledge of metals and their respective properties. Employees must be able to relate to other people beyond receiving instructions. Can get along with co-workers or peers and respond appropriately to feedback from a supervisor in a professional manner. RESPONSIBILITIES Collaborate with the team and the department lead to accommodate production schedule changes. Represent the company, as required, during customer, internal and ISO audits. Ensure adherence to Standard Operating Procedures (SOP) and the Quality Management System (QMS), identify potential deviations, and notify the department Lead of non-conformance, assist with root cause analysis as requested. EDUCATION: Associates degree or vocational training in machine tool technology, technical, or equivalent work experience. EXPERIENCE: 5+ years' experience with CNC milling, Swiss turning, Fanuc, Mazak, or HAAS machines and CAM software (GibbsCAM preferred) in an ISO regulated manufacturing environment. Internships and PT experience acceptable. ADP1415 0HR-251203-450

ARCH - Minneapolis is looking for a CNC Swiss Machine Lead to join our team! If you are looking for an opportunity to coach and develop other Swiss machinist while still being hands on as a working lead this may be the next career for you! In this role you will focus on determining work assignments and resolving issues for the team, train other machinists, provide leadership to inexperienced machinists, maintenance requests, safety incident reporting, manage flow of parts and machine high-quality parts on a timely basis to meet customer requirements and at times performing set-ups, modifying, and creating programs, and operating various types of CNC Swiss Machines. Sign On Bonus: $3,000.00 Pay Scale: $35-$40/hour, depending upon experience Benefit Package: Medical, Dental & Vision effective day one with competitive premiums and coverage. 401(k) with generous employer match and several other company benefits offered. Essential Duties and Responsibilities include the following. Other duties may be assigned: Responsible for leading production in the CNC Swiss area and communicating with leads on other shifts. Responsible for managing daily priorities, assigning work to those in the department to maintain optimal flow. Prioritize work based upon product and resources. Participate in daily production and GEMBA meetings to maintain constant communication of scheduled work. Monitors CNC Swiss Machinist productivity to ensure correct machining processes are used and department activities are consistent with manufacturing objectives. Plan and coordinate workflow with other departments and scheduling function. Supports company policies working with direct reports and collaborates with the Leadership Team to resolve issues/concerns. Interview and evaluate applicants for vacant positions. At times you are expected to setup and operate a variety of CNC Swiss equipment to produce components using engineering drawings and specifications. Leads process improvement, process development, and productivity improvement efforts. Ensure employees are performing and documenting in-process quality control inspections and labor entries. Responsible for managing and consistently maintaining a safe, clean, and organized department. Education and/or Experience: High school diploma or GED equivalent Must be a U.S. Citizen or Permanent Resident, due to contractual requirements At least 5 years relevant experience in a Swiss machining environment or an equivalent combination of education and experience. Minimum of 2-year previous supervisory experience in a manufacturing environment. Contract Manufacturing experience highly desirable Proven ability to work in a fast past work environment. Knowledge and understanding of ERP systems (Epicor a plus) and Microsoft office suite. Ability to read blueprints, use micrometers, calipers, and other quality control inspection gauges Ability to setup and operate CNC Swiss machine tools. Ability to program CNC Swiss machine tools. Competencies: • Quality - Demonstrates accuracy and thoroughness; monitors own work to ensure quality. • Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Skills: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. • Ability to write routine reports and correspondence. • Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. • Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. • Ability to deal with problems involving a few concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand and walk. The employee is occasionally required to sit; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. ADDITIONAL NOTES ARCH Global Holdings, LLC is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Holdings, LLC are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.