Computer numerical controller machinist jobs in Edison, NJ - 64 jobs

Job Title: Machinist Department: 1007 - Machining Pay Range: $24.00 - $40.00 per hour (based on skill level and experience) Shift: 2nd shift (3:30pm - 12:00am) +10% shift differential The Machinist is responsible for the setup, operation, programming (as applicable), and inspection of manual and CNC machining equipment to produce high-quality parts that meet customer and engineering specifications. Depending on experience level, this role may range from performing basic machining and inspection tasks to advanced programming, troubleshooting, process optimization, and mentoring of other machinists. All Machinists are expected to work safely, maintain quality standards, and contribute to efficient shop operations. Responsibilities may vary based on skill level and experience Operate manual and CNC machining equipment to produce parts according to blueprints, routers, and engineering specifications. Load and unload parts into fixtures and ensure proper part handling and protection throughout the machining process. Perform machine setups, tooling changes, and offset adjustments as required. Upload, modify, or develop CNC programs, including adjustments to speeds, feeds, and cutting depths, as appropriate to experience level. Conduct in-process and final inspections, measuring part features against dimensional tolerances using precision inspection tools. Document inspection results, production data, and quality records accurately. Perform deburring, edge breaking, and surface blending using appropriate tools and techniques. Perform routine preventative maintenance, including monitoring coolant and lubricant levels and maintaining clean, organized work areas. Troubleshoot machining issues and collaborate with engineering, production, and maintenance to resolve problems efficiently. Use forklifts and material handling equipment safely to move materials within the shop. Log time and job activity accurately using company tracking systems. Follow all safety regulations, PPE requirements, and company policies; actively support a strong safety culture. Support continuous improvement initiatives to improve quality, efficiency, and waste reduction. Mentor and assist less experienced machinists, as applicable. Qualifications Must be a US citizen. Ability to read, write, and communicate effectively in English. Strong verbal and written communication skills. Working knowledge of shop math, ranging from basic fractions and decimals to advanced trigonometry and GD&T, depending on level. Knowledge of machining processes, metal properties, and material behavior. Proficiency with inspection tools such as calipers, micrometers, gauges, and CMMs (as applicable). Knowledge of hand tools, mechanical assemblies, part holding, and deburring methods. Ability to interact with computers and CNC controls at a level appropriate to experience. Strong attention to detail and commitment to quality. Familiarity with safety protocols and best practices in a manufacturing environment. Education and/or Experience High school diploma or equivalent required. Apprenticeship, vocational, or technical training preferred. Experience operating manual, semi-automated, and/or CNC machining equipment (e.g., lathes, mills, grinders). Experience levels may range from entry-level machining exposure to advanced CNC programming, setup, troubleshooting, and leadership. Prior mentoring or leadership experience is a plus for higher-level placements. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle or feel and talk or hear. The employee is frequently required to sit. The employee is occasionally required to walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is occasionally required to lift up to 100 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment can vary. Trident Maritime Systems is an EEO/AA employer that offers a comprehensive compensation package and opportunities for growth. As a government contractor, we adhere to regulations including the need for U.S. citizenship for certain positions. Offers of employment are contingent on and not considered finalized until the required background check and drug test has been performed and the results received and have been accessed. About Trident Maritime Systems - Custom Alloy Division Trident Maritime Systems is a global leader in providing innovative solutions for maritime and defense industries. Our Custom Alloy division in High Bridge, NJ, specializes in manufacturing high-quality seamless and welded pipe and tube solutions, as well as custom fabrications for critical applications. We serve government and commercial clients. For government, we work on military and defense contracts requiring precision and reliability. For commercial clients, we provide custom-engineered solutions across various industries. This dual focus allows us to take on diverse, high-pressure projects. Unlike mass production facilities, we create large, custom fittings tailored to specific needs. Our plant features large machines for heavy-duty work in a traditional manufacturing environment. It can be hot, cold, or dirty, but we prioritize safety and provide tools and training to ensure success. Trident Maritime Systems offers a comprehensive benefit package which includes: Cigna medical, dental; VSP vision. Flexible Spending Account & Health Savings Account (with company contributions) 401K Paid Time Off 10 Paid Holidays Safety shoe reimbursement, $200 per year Prescription safety glasses program Voluntary Supplemental Insurance Company Paid Life Insurance Voluntary Life Insurance Paid training and development opportunities Employee referral program 2nd shift - 3:30 pm - 12 am (+10% shift differential)

Apply NowBack to All Jobs Job Posted: Dec 30, 2025 Job Location:GP:50 Grand Island Job Department:Division I Job Level: Experienced Shift:First Shift > Annual Salary:$24- $30 Per Hour Position Type:Full Time - Regular - Hourly Travel:0% - 5% CNC Machinist Position Summary We are seeking an experienced CNC Machinist to join our growing shop. This position is hands-on and focused on setup, operation, and quality production of precision parts. Key Responsibilities Principal duties and responsibilities: * Set up and operate CNC lathes * Read and interpret blueprints and GD&T * Load tools, set offsets, and prove out jobs * Inspect parts using calipers, micrometers, and gauges * Maintain tight tolerances and quality standards * Make minor program edits at the machine (G-code) * Perform basic machine maintenance and housekeeping SKILLS: * Ability to read prints/drawings. * Ability to use standard measurement tools with accuracy. * Basic math skills including some trigonometry. * Ability to take direction and work well within a group. EDUCATION and/or EXPERIENCE: * 2+ years CNC machining experience (preferred) * Strong blueprint reading and measurement skills * Experience with CNC lathes * Ability to work independently and meet production goals * Reliable, punctual, and quality-driven Preferred (Not Required) * Programming experience * Experience with Fanuc controls * Tooling and fixture knowledge EOE/AA Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Apply for this Position Apply Now

Programs and edits CNC turning and or milling machines for production efficiency to manufacture parts compliant to drawing specifications. Ability to read blueprints, drawings, specifications and set up requirements. Selects, aligns and secures holding fixtures, cutting tools, attachments, accessories and materials on machines. Responsibilities include drilling, tapping, threading, turning, facing and boring. Calculates and sets controls to regulate machining factors such as speed, feed and coolant flow. Set up and operate machine on trial run to verify accuracy of machine settings or programmed control data. Performs basic preventive maintenance on the machines. Other duties as assigned. Education / Experience: CNC offline programming, G-Code. Mathematical Skills - Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. High School Diploma or (GED). Knowledge of and experience with setting up and operating various makes of machines. Experience with using various gauges to measure part features. Must be a U.S. Person due to ITAR and Export Control Procedures

Eddie Kane Steel Products has been a family owned and operated business providing exceptional service in the steel industry for over 25 years. The company motto has always been to "Treat others as you would have them treat you" and we are in search of a full time CNC Machinist. General Description: Proficient in CNC Machining Duties and Responsibilities: · Follows all safety guidelines and standards. · Check all documentation before beginning a work order. · Check material for size and correct dimensions as well as quantity before beginning the work order. · Setup machine and/or any tooling required to machine/grind the parts. · Record all information on work order. · Complete Production Log daily. · Clean and maintain work area. · Performs general lubrication maintenance to the work center. · Maintain neat and accurate written documentation as required. · Report any problems or quality concerns to supervisor immediately. · Other related duties as assigned. Skills: Ability to read Micrometers, calipers and tape measure Ability to read and decipher shop/machine drawings CNC experience Basic reading and mathematical skills (addition, subtraction, multiplication, division) Dexterity skills & balance Ability to lift up to 75 pounds Ability to lift (with hands & arms), bend, stoop, squat, stand or walk for extended periods of time Good oral & written communication skills Good interpersonal skills and the ability to work well with others Ability to run overhead crane Ability to become forklift certified Education/Experience: High School Diploma or Equivalent Prior experience helpful The health and safety of our Maverick Engineered Products employees is of the utmost importance to us and ensure that we have all PPE (Personal Protective Equipment) and hand sanitizer available to our employees, take employee, visitor and vendor temperatures, disinfect all common areas, practice social distancing and washing hands throughout the day to maintain a safe and healthy work environment! ** NO AGENCIES ** NO PHONE CALLS ** NO RELOCATION ** Work schedule Monday to Friday 8 hour shift Day shift Benefits Paid time off Health insurance Dental insurance Vision insurance 401(k) 401(k) matching Referral program

Job DescriptionBenefits: Paid time off Job is in New Jersey. Recruiters and out of the country candidates, please don't contact this job poster. PLEASE ONLY APPLY IF YOU HAVE EXPERIENCE WITH SWISS MACHINE. Compensation based on Experienced and skills Essential job functions include: Set up and operate and maintain Tsugami Lathes Read and interpret blueprints, technical drawings, and work orders Program, adjust, and optimize Swiss screw machines for maximum efficiency Perform scheduled and regular preventive maintenance on equipment. Inspect finished products for quality and adherence to specifications Use precision measuring instruments to ensure parts meet tolerances Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. Drive problem-solving activities for complex machine or process issues. Complete and compile documentation related to quality inspection standards. Ensure proper material control, identification, and traceability for conforming and nonconforming materials. Capable of mentoring and training lower-level machinists. Utilize ERP system to document and control inspection and traceability activities. Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. Maintain a clean and organized work area

Job DescriptionSalary: $25-$35 hourly CNC Programmer / CNC Machinist Company:MAC Products *********************** MAC Products is a trusted manufacturer of precision components and engineered solutions for the electrical utility and transit industries. For over 60 years, weve built a reputation for quality, reliability, and innovation. Join our team and help us deliver critical infrastructure products that keep communities connected and powered. Position Summary We are seeking a skilled CNC Programmer / CNC Machinistto develop efficient CNC programs, set up machines, and produce high-quality parts. This role combines advanced programming with hands-on machining to support precision manufacturing and on-time delivery. Key Responsibilities Program CNC machines using Fusion 360 CAM software. Interpret drawings, models, and GD&T for copper, aluminum, stainless steel, and steel alloys. Set up and operate CNC mills and lathes (HAAS), including multi-axis and live tooling. Inspect parts for accuracy and collaborate with Quality on corrective actions. Optimize cycle times, tooling, and machining strategies for efficiency. Maintain safety standards and organized work areas. Qualifications 3+ years CNC machining/programming experience (milling, turning, multi-axis). Proficiency with Fusion 360 or similar CAM software. Ability to read engineering drawings and maintain tight tolerances. Experience with HAAS machines and common precision materials. Preferred 4-axis/5-axis programming, probing routines, fixture design. Familiarity with copper machining and ERP systems. Physical Requirements Stand for extended periods; lift up to 50 lbs. Work around machinery, lubricants, and noise. Pay $25 - $35 hourly depending on experience level Benefits Health insurance Paid time off Vision insurance Work Location Onsite Monday - Friday in Kearny, N

CNC Programmer/Prototype Machinist - LiquidPiston Department: Machine Shop Employment Type: Hourly About LiquidPiston: LiquidPiston is developing advanced rotary engine technologies that redefine what is possible in power generation and propulsion. Our team designs and builds cutting-edge prototypes that push the boundaries of efficiency, performance, and size. We are seeking a highly skilled Prototype Machinist to support our rapid development and testing initiatives. Position Summary: The Prototype Machinist will be responsible for machining precision components for engine prototypes and test fixtures. This role requires strong CNC programming and machining experience, exceptional attention to detail, and the ability to work in a fast-paced R&D environment. The ideal candidate is hands-on, self-driven, and comfortable working with both CNC and manual equipment. Key Responsibilities * Program, set up, and operate CNC milling machines and lathes, with an emphasis on multi-axis milling. * Utilize Haas and Fanuc controls to execute complex machining operations. * Create and optimize machining programs using MasterCam (preferred). * Produce high-precision prototype components from engineering drawings, 3D models, and sketches. * Inspect parts to ensure dimensional accuracy and quality standards are met. * Operate manual machine tools, including: * Surface grinder * Bridgeport mill * Manual lathe * Collaborate closely with engineers, designers, and technicians to refine prototype designs. * Maintain a safe, clean, and efficient work environment. * Assist in developing machining processes, tooling selections, and fixture designs for prototype builds. Required Qualifications * Proficiency operating and programming CNC mills and lathes; experience with multi-axis milling strongly preferred. * Strong working knowledge of Haas and Fanuc controls. * Experience programming and tool-pathing using MasterCam (preferred but not required). * Demonstrated ability to operate manual machine tools (surface grinder, Bridgeport, manual lathe). * Ability to read and interpret complex mechanical drawings and GD&T. * Strong problem-solving skills and the ability to work independently on prototype projects. * High attention to detail and commitment to quality. Benefits & Perks * PTO: We value work-life balance and encourage time to rest and recharge. Our benefits include 3 weeks of PTO (which covers vacation and sick time) plus 10 paid holidays. * Health & Wellness: Comprehensive medical and voluntary dental, and vision coverage - you choose what works best for you. * Equity Participation: Employes may receive RSUs (Restricted Stock Units). * 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% after 1 year of employment. * Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening.

Join BRECO flex as a CNC Machinist! BRECOflex is seeking a skilled and motivated CNC Machinist to join our precision manufacturing team. In this role, you will be responsible for producing high-quality metal and plastic components using HAAS CNC machines. You'll set up, operate, and maintain CNC mills and lathes, ensuring each part meets exact specifications. This position requires a solid understanding of CNC programming, tooling, and machining processes, with a strong focus on quality, efficiency, and continuous improvement. Skills and Experience: · Experience: o Minimum 5 years of experience as a CNC machinist, preferably with at least 3 years' experience with HAAS CNC machines. o Experience in programming, setting up, and operating CNC mills and lathes · Technical Skills: o Proficient in reading and interpreting technical drawings, blueprints, and CAD models. o Strong understanding of G-code programming and CNC machine operations. o Proficiency in using precision measurement instruments and tools. · Other: o Strong problem-solving skills and attention to detail. o Ability to work independently and as part of a team. o Excellent communication and interpersonal skills. Job Functions: · Set-Up and Operation: o Set up and operate CNC machines, including mills and lathes, to produce parts for work order specifications, drawings, and internal standards. o Load material into CNC machine using different clamping technologies, select appropriate tooling, touch off tools, monitor tool condition during operation. o Adjust machine settings and process parameters, such as speeds, feeds, and cutting tools, to optimize production efficiency and ensure highest product quality. o Debur parts - utilizes deburring equipment to finish parts. · Programming: o Interpret technical drawings, blueprints, and CAD models to write and modify CNC programs and macros. o Fully understand geometrical product specifications. o Utilize G-code to modify available CNC codes and create new code to manufacture custom parts with tight tolerances. o Troubleshoot and make necessary adjustments to programs to ensure optimal machine performance, product quality and tool life. · Quality Control: o Inspect finished parts to ensure they meet specifications and quality standards. o Use precision measuring instruments, such as micrometers, calipers, and gauges, to verify part dimensions. o Use CMM to inspect features with critical tolerances. o Perform first-piece and in-process inspections, adjusting as necessary to maintain quality. · Maintenance and Troubleshooting: o Perform routine maintenance on CNC machines to ensure optimal performance and minimize downtime. o Diagnose and troubleshoot machine issues, work with maintenance to request repairs and adjustments as needed. · Continuous Improvement: o Collaborate with engineering and leadership to identify and implement process improvements. o Provide input and share experience to enhance productivity and reduce cycle and set up times. o Mentor and train junior machinists and apprentices in CNC machining best practices. · Safety and Compliance: o Adhere to all safety protocols and maintain a clean and organized work environment. o Ensure compliance with Company policies and industry standards, including ISO quality requirements. Physical/Environmental: · Must be able to lift 49 lbs. to waist height. · Prolonged periods of standing (90% of shift) · Ability to move about the manufacturing area · Manual dexterity · Hand eye coordination Manufacturing Environment, inclusive of varying temperatures Compensation and Benefits: Salary Range: $54,000 - $66,500 (based on experience) FREE health insurance for employees Employer supported HSA and HRA accounts 401K offering with match Generous PTO plan FREE Employee snacks

Job Description Founded in 2000, CompoSecure (NYSE: CMPO) is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit ******************* and ******************* Position Overview This position is responsible to complete the necessary tasks associated with taking approved designs, drawings or specifications to reality in a finished product on CNC milling and manual milling, lathe, band saw and drill press equipment. Key Responsibilities: Generate accurate CAD/CAM drawings and CNC programs from engineering models or technical drawings. Specify and select proper tooling for HAAS, FADAL, and DMG-MORI CNC machining centers. Set up and operate CNC mills, as well as manual mill, lathe, band saw, and drill press. Perform in-house inspection of machined parts using precision measuring instruments. Create detailed technical drawings from 2D & 3D models. Interpret and apply geometric dimensioning and tolerancing (GD&T), symbols, and manufacturing requirements. Install tooling, set tool offsets, establish proper work holding and set work offsets on CNC equipment. Qualify machined dimensions on finished parts through precise measurement and inspection techniques. Read and interpret blueprints accurately; understand machining methods and practices. Work independently, manage time effectively, and prioritize multiple tasks and projects. Monitor machine operation by observing and listening for issues such as tool wear or breakage. Assist in daily production by operating assigned equipment as required. Other Important Responsibilities: Must be able to operate assigned equipment safely and efficiently; Have a strong work ethic and the ability to work cooperatively; Good organizational and communication skills; Must be able to keep record of time spent and materials used; Timely Corrective Action response and resolution to relevant situations; Engage and support companywide Safety and Cleanliness programs; Must speak English; Other miscellaneous duties as assigned Qualifications: Proven experience as a CNC Machinist / Programmer in a manufacturing environment. Proficiency in CAD/CAM software (e.g., Surfcam, Autocad, Solidworks, Esprit, Mastercam, or equivalent). Hands-on experience with HAAS, FADAL, and DMG-MORI 3 and 4 axis CNC machines. Strong understanding of blueprint reading, GD&T, G Code, M Code and machining / Setup practices. Good working knowledge and understanding of tooling and proper usage, as well as speed & feed calculation. Materials - Aluminum, Stainless, Plastics, and Steel. Ability to use precision measuring instruments (micrometers, calipers, indicators, CMM etc.). Excellent problem-solving skills and mechanical aptitude. Ability to work independently with minimal supervision. Strong organizational and time management skills Preferred Qualifications: Formal training in CNC machining or related technical field. Experience in both prototype and production machining environments. Familiarity with ISO quality standards is a plus Physical qualifications and work environment: Must be able to lift 50 lbs; Must be able to sustain physical work for 8+ hours per day including the following: Standing for 8+ hours per day Reaching and pulling Sight Walking through shop Bending, climbing and crouching. Shop noise levels are such that protective ear-coverings are recommended. Short notice, overtime and some weekend demand according to production needs. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: Medical, Dental & Vision Coverage Flexible Spending Accounts (FSA) Company-Paid Life and Disability Insurance 401(k) with Company Match Paid Time Off & Paid Holidays Annual Bonus Opportunities Employee Assistance Program (EAP) Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to **************************. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionBenefits: Company parties Competitive salary Paid time off We are hiring someone experienced with Mosaic, Cabinet Vision, or similar cabinet software to enter jobs, create detailed cabinet layouts, and generate accurate CNC files. This role requires someone extremely organized, detail focused. Responsibilities Enter cabinet orders into Mosaic / Cabinet Vision with high accuracy Create detailed cut lists, and CNC machining files Ensure ALL cabinet parts, holes, dados, toe kicks, shelves, and hardware placements are correct Prepare and organize files for CNC cutting (nesting, optimization, labeling) Double-check every job to prevent errors before sending to production Communicate with production team to verify details and resolve issues Requirements Experience with Mosaic, Cabinet Vision, or similar software (required) Strong understanding of cabinet construction and CNC machining Very organized and extremely detail-oriented Ability to follow specs exactly and verify measurements

**Job Title: Lathe Operator** **Job Description** This position focuses on precision machining, turning raw materials into accurate, high-quality components. It requires strong technical skills, the ability to interpret detailed specifications, and a commitment to maintaining safety and efficiency throughout the production process. **Responsibilities** + Review work orders and blueprints via shop computer. + Record job hours and scan badge for time tracking. + Perform light CNC programming, set up tooling, and adjust machine settings. + Operate CNC and manual lathes to fabricate precision parts. + Load raw materials and conduct test runs for accuracy. + Inspect parts to ensure quality standards. + Maintain and clean equipment and work area. + Report defective materials or equipment issues. **Essential Skills** + Technical school accreditation or skilled trades program and/or 2-4 years of experience operating CNC mills, lathes, and manual machines. + Solid understanding of machining processes and techniques. + Ability to read and interpret technical documents, drawings, and blueprints. + Strong communication skills to understand assignments in electronic, written, or verbal form. + Attention to detail with knowledge of machinery operation and maintenance. + Problem-solving skills for troubleshooting equipment issues. **Additional Skills & Qualifications** + Ability to program a machine is not a requirement but it is a significant plus. + Ability to stand for extended periods; occasional walking. + Frequent use of hand and finger dexterity. + Occasional bending, stooping, or kneeling. + Strong verbal communication and hearing ability. + Visual acuity for operating equipment, reading technical data, and using shop computers. + Ability to safely lift, push, or carry items over 50 lbs. + Comfortable working near moving mechanical parts. + Tolerance for exposure to fumes (e.g., mineral spirits, cleaning solutions). + Ability to work in environments with loud noise (e.g., machine operations). **Why Work Here?** Join a team dedicated to precision and quality in a modern facility with high cleanliness standards. Enjoy the opportunity to develop your skills in a supportive environment with a focus on safety and efficiency. **Work Environment** 2nd Shift - 4:00PM - 12:30AM. Modern, well-maintained production floor with high cleanliness standards. **Job Type & Location** This is a Contract to Hire position based out of Marlboro, NJ. **Pay and Benefits** The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Marlboro,NJ. **Application Deadline** This position is anticipated to close on Jan 30, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Controls Programmer - Lawrenceville, NJ - Controls Energy Company Controls Programmer RESPONSIBILITIES: Program custom applications from scratch or prepackaged libraries Responsible for startups and commissioning on BAS Systems Communicate effectively with technicians and PMs in the field Create controls databases from scratch Familiar with BAS communication protocols, specifically BACnet Strong troubleshooting skills to resolve any issues within systems Manage programs from start to finish and ensure they cover all requirements Understanding of graphical programs such as Tridium front ends Acute knowledge of HVAC systems and their integration within controls COMPANY INFO: Founded over 15 years ago. Clients include Pharmaceutical/Biotech, Commercial, Temperature and Humidity monitoring, Energy Solutions, Office Space, and Processing plants Mix of New Construction and Retrofit Work/Services: Facility Management Systems, Process Controls, Energy & Optimization, 24/7 Monitoring & Response, Measurement & Verification, Energy Driven Solutions, Maintenance Programs OFFERED Fantastic Medical and Dental Benefits Excellent Retirement Plan Competitive Compensation Profit Sharing plan Generous Vacation and Holiday time

* Job Type: Support Staff - Non-Union * Bargaining Unit: * Regular/Temporary: Regular * End Date if Temporary: * Hours Per Week: 35 * Standard Work Schedule: * Building: * Salary Range: $75,000 to $85,000 The salary of the finalist selected for this role will be set based on a variety of factors, including but not limited to departmental budgets, qualifications, experience, education, licenses, specialty, and training. The above hiring range represents the University's good faith and reasonable estimate of the range of possible compensation at the time of posting. Position Summary We are seeking a Senior Machinist Technician for the Department of Mechanical Engineering in the Fu Foundation School of Engineering and Applied Science (SEAS). This position is primarily responsible for the operation of and instruction within the mechanical engineering teaching laboratory's machine shop. Reporting to the Manager of Instructional Laboratories, the incumbent is responsible for the machining needs of the space, including instructing students on the proper use of equipment, operating and maintaining fabrication equipment (CNC mills, CNC lathes, bandsaws, grinders, etc.), and providing consultations for advanced machining techniques and CAM programming. The incumbent also assists with setting up laboratory experiments, performing maintenance on laboratory equipment and machine tools, instructing students on the operation of laboratory equipment, taking inventory, and other tasks required for the day-to-day operation of the laboratory, with a focus on the machine shop. The incumbent maintains and operates machining equipment and other mechanical and electrical instrumentation. The Senior Machinist Technician should be willing to operate equipment such as conventional and CNC machine tools, CAM programs, wind tunnels, material testing systems, hardness testers, and other similar systems. The incumbent will also interface with student clubs in the design and manufacturing of club projects and may be called upon to chaperone student clubs in testing. Responsibilities * Training and instructing students on proper machining methods and safety in the machine shop, as well as operating and maintaining fabrication equipment. * Performing and supervising machining operations for undergraduate students and graduate research, including advanced machining processes. * Maintaining and operating laboratory and shop equipment, including CNC mills, CNC lathes, laser cutters, 3D printers, mechanical and electronic instrumentation, and computers interfacing with instrumentation/equipment. * Providing assistance for students in the design and implementation of research projects, including holding machining and CAM consultations for student projects. * Interfacing with student clubs regarding project design and testing supervision. * Setting up and providing support for experiments, and performing maintenance to ensure the effective operation of laboratory equipment. * Maintaining machine shop inventories and ordering replacement supplies, as well as coordinating billing for shop materials. * Performs other tasks, duties, and responsibilities as assigned. Minimum Qualifications * Minimum three (3) years of experience in a research environment or other general experience working in a "hands-on" laboratory or shop environment. * Machining and teaching/mentoring experience. * Bachelor's degree in a related field, including mechanical engineering. * Preferred: Certifications and/or completed courses on Fusion or SolidWorks, advanced machining, or related topics preferred. Equal Opportunity Employer / Disability / Veteran Columbia University is committed to the hiring of qualified local residents.

Immediate Hiring Need for Shop Worker with CNC Operator/Programmer We are seeking a skilled CNC operator to join our dynamic team. The ideal candidate will handle daily tasks assigned by the plant manager, including learning to manage the shop and oversee operations. RESPONSIBILITIES: Cut wood to length on saw Assemble skids and crates Stage materials for assembly Package finished goods for shipment Stock completed items in the appropriate place Forklift operation Equipment maintenance CNC Machine including programing and overseeing operators Follow all safety protocols Repairing and adjusting equipment Qualifications: 3+ years' experience in operation and maintenance of wood cutting and assembly equipment. CNC programing and operation Carpentry and construction background Basic mechanical aptitude Able to perform skilled work with moderate difficulty Must have the ability to work independently with little to no day-to-day supervision Ability to communicate well with co-workers and customers Ability to lead, direct, mentor and supervise team members Exhibits care and strong attention to detail Current forklift certification (preferred but not required) Hours: M-F 7:00AM-3:30 PM Benefits: PTO Health Insurance 401K ***Veterans Are Encouraged to Apply***

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access certain necessary systems. Security Clearance Type: None/Not Required Security Clearance Status: Not RequiredJob Description Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 2nd shift. 2nd shift hours are Monday through Friday from approximately 3 pm to 12 am. In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided. Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed. Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment. Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure. Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer-based systems to retrieve and store information and records. Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators' checklist, for upkeep and to assure equipment operates properly. May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area. Qualifications You Must Have: High School Diploma or GED equivalent with 6 months of machining experience In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations). As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job DescriptionBenefits: 401(k) 401(k) matching Free uniforms Health insurance We are a 70 year old Company located in a great and safe neighborhood in Brooklyn, servicing the NYC HI-rise building industries mechanical equipment. Experience: We are seeking a lathe operator in a maintenance machine shop. Comfortable environment, low supervision, overtime available if interested. Pay: 60k to 80k Benefits: Company contributed medical Pension, Life Insurance, Employee Parking, Uniforms, Etc. Paid holiday and vacations Applicant must have minimum five years machining experience and must be willing to work overtime Salary negotiable based on experience

CNC Programmer is responsible for supporting the programming and engineering departments in their effort to develop, evaluate, and improve manufacturing products and processes, ensuring all pre-production processes are maximized and set-up prior to jobs being released to the shop floor. They assist in process development and documentation and programming efforts including programming set up, adjust, test, maintain, and troubleshooting of CNC milling, lathe, or other machinery according to blueprint specifications. Essential Job Functions Follow instructions and direction from the Supervisor and Lead to support machining operations. Create and develop new CNC programs using 3D models generated in SolidWorks and other CAD systems. Manipulate 3D models within MasterCam programming software to ensure accurate, efficient, and optimized tool paths. Demonstrate advanced knowledge and programming proficiency for 4-5-axis milling machines, 3-axis mills, lathes, and horizontal machining centers. Collaborate with CNC Operators to develop detailed setup sheets, provide training on new programs, and assist with program implementation. Troubleshoot programming and machining issues to ensure precision, accuracy, and production efficiency. Support internal processes including Managing for Daily Improvement (MDI), Integrated Business Planning (IBP), Good Manufacturing Principles (GMP), and Good Documentation Practices (GDP). Follow GDP/GMP guidelines by maintaining program files in revision-controlled and secure digital locations. Collaborate with the maintenance, operations, and design teams to ensure effective communication and smooth production flow. Assist operations with validation executions and ensure programs meet all quality and compliance standards. Program parts in the most efficient and effective manner possible, recommending process improvements and equipment optimization where applicable. Read, interpret, and adhere to applicable engineering drawings, blueprints, manufacturing specifications, work instructions, and quality procedures. Support On-Time Delivery (OTD) and Quality metric targets by continuously improving program performance and cycle times. Maintain accurate records, properly execute required forms and reports, and uphold company documentation per regulatory and internal standards. Exhibit strong work ethics, professionalism, and integrity while fostering teamwork and interdepartmental cooperation. Adhere to all environmental, safety, health, and operational procedures, including proper use of personal protective equipment (PPE) and lockout/tag-out processes. Represent the company's mission, vision, and values through reliability, collaboration, and continuous improvement. Maintain punctuality and attendance standards; work overtime as required to meet production goals. Perform other related tasks as assigned, some of which may become essential to the position. Skills and Abilities Required Skills and Abilities Strong business acumen including problem-solving, data analysis, process improvement, and decision-making. Expertise in CNC programming using MasterCam software (or equivalent), including toolpath generation for complex geometries and multi-axis machining. Proficiency with SolidWorks or equivalent 3D modeling software. In-depth understanding of machining materials including polymers, Radel, aluminum, and stainless steel. Ability to read, interpret, and apply GD&T (Geometric Dimensioning and Tolerancing) to ensure part accuracy and fit. Skilled in using precision measurement instruments (e.g., gauges, micrometers, calipers). Strong organizational skills, attention to detail, and ability to manage multiple priorities effectively. Excellent written and verbal communication skills; able to collaborate across departments. Demonstrated ability to maintain confidentiality with proprietary programs and sensitive design data. Proficiency in Microsoft Office Suite (Outlook, Word, Excel). Self-motivated, reliable, and able to work both independently and within a team environment. Must be able to wear required safety equipment and read, write, and speak English fluently. Knowledge and Experience Required Knowledge and Experience 0-3 Years (L1), 4-6 Years (L2), 7+ Years (L3) of experience in a related job role High School Diploma/GED and technical/associate degree. Or any equivalent combination of education, training, and experience that demonstrates the ability to perform the duties and responsibilities as described, including an internship in a relevant trade. Preferred Knowledge and Experience: 5 yrs+ experience with MasterCam programming software, or equivalent. Experience working in manufacturing with trade terminology and nomenclature. Knowledge of machining poly, radel, aluminum, & stainless-steel materials GDT a plus with machining features requiring making parts. Track record in process improvement and lean manufacturing. Medical device manufacturing experience. A thorough understanding and a working knowledge of all job phases. Physical/Mental Involvement & Environmental Factors Physical Requirements: While performing this job's duties, employees are regularly required to sit, walk, stand, bend, crouch, crawl, and twist. Reach, push, and pull with hands and arms. Lift to 50 pounds. Talk and hear, both in person and by telephone. Mental Requirements: Employees are regularly required to use written and oral communication skills; read and interpret data, information, and documents; analyze and solve non-routine and complex problems; use math and mathematical reasoning; observe and interpret situations; learn and apply new information or skills; perform highly detailed work on multiple, concurrent tasks; work under intensive deadlines with frequent interruptions, and interact with staff, the public. Working Conditions: 100% of work takes place inside an industrial office/warehouse environment. Employees work in proximity to moving machinery, mechanical parts, and vehicles and may have exposure to prolonged loud noise, including sirens, horns, and tooling. Employees may handle hazardous material or have exposure to toxic or caustic chemicals, biological hazards, and airborne fumes. The noise level is usually mild to moderate 75% of the time. Disclaimer s are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may be assigned or changed at any time with or without notice. Job descriptions are developed through observation of work, information from the marketplace, and interviews with workers and supervisors currently performing the job. Qualifications Skills and Abilities Required Skills and Abilities Strong business acumen including problem-solving, data analysis, process improvement, and decision-making. Expertise in CNC programming using MasterCam software (or equivalent), including toolpath generation for complex geometries and multi-axis machining. Proficiency with SolidWorks or equivalent 3D modeling software. In-depth understanding of machining materials including polymers, Radel, aluminum, and stainless steel. Ability to read, interpret, and apply GD&T (Geometric Dimensioning and Tolerancing) to ensure part accuracy and fit. Skilled in using precision measurement instruments (e.g., gauges, micrometers, calipers). Strong organizational skills, attention to detail, and ability to manage multiple priorities effectively. Excellent written and verbal communication skills; able to collaborate across departments. Demonstrated ability to maintain confidentiality with proprietary programs and sensitive design data. Proficiency in Microsoft Office Suite (Outlook, Word, Excel). Self-motivated, reliable, and able to work both independently and within a team environment. Must be able to wear required safety equipment and read, write, and speak English fluently. Knowledge and Experience Required Knowledge and Experience 0-3 Years (L1), 4-6 Years (L2), 7+ Years (L3) of experience in a related job role High School Diploma/GED and technical/associate degree. Or any equivalent combination of education, training, and experience that demonstrates the ability to perform the duties and responsibilities as described, including an internship in a relevant trade. Preferred Knowledge and Experience: 5 yrs+ experience with MasterCam programming software, or equivalent. Experience working in manufacturing with trade terminology and nomenclature. Knowledge of machining poly, radel, aluminum, & stainless-steel materials GDT a plus with machining features requiring making parts. Track record in process improvement and lean manufacturing. Medical device manufacturing experience. A thorough understanding and a working knowledge of all job phases. Physical/Mental Involvement & Environmental Factors Physical Requirements: While performing this job's duties, employees are regularly required to sit, walk, stand, bend, crouch, crawl, and twist. Reach, push, and pull with hands and arms. Lift to 50 pounds. Talk and hear, both in person and by telephone. Mental Requirements: Employees are regularly required to use written and oral communication skills; read and interpret data, information, and documents; analyze and solve non-routine and complex problems; use math and mathematical reasoning; observe and interpret situations; learn and apply new information or skills; perform highly detailed work on multiple, concurrent tasks; work under intensive deadlines with frequent interruptions, and interact with staff, the public. Working Conditions: 100% of work takes place inside an industrial office/warehouse environment. Employees work in proximity to moving machinery, mechanical parts, and vehicles and may have exposure to prolonged loud noise, including sirens, horns, and tooling. Employees may handle hazardous material or have exposure to toxic or caustic chemicals, biological hazards, and airborne fumes. The noise level is usually mild to moderate 75% of the time.

Job Description Seeking machine operators with experience on any of the following CNC machines: - Cylindrical Grinder - Milling - Lathe - Gear Grinding - Gear Hobbing REQUIREMENTS • Must be a U.S. Citizen or a Green Card holder COMPANY OFFERS •\tGrowing Backlog •\tCompetitive Rate Structure (Depending on Ability and Experience) •\tTrainings •\tGreat Health, Dental and Vision Benefits, Life Insurance Package •\tProfit Sharing and Bonuses •\t401K Matching •\tSafety Equipment •\tModern Equipment and Attractive Shop •\tEqual Employment OpportunityCompany DescriptionREQUIREMENTS\r • Must be a U.S. Citizen or a Green Card holder\r \r COMPANY OFFERS\r •\tGrowing Backlog\r •\tCompetitive Rate Structure (Depending on Ability and Experience)\r •\tTrainings\r •\tGreat Health, Dental and Vision Benefits, Life Insurance Package\r •\tProfit Sharing and Bonuses\r •\t401K Matching\r •\tSafety Equipment\r •\tModern Equipment and Attractive Shop\r •\tEqual Employment Opportunity

Job DescriptionBenefits: 401(k) matching Dental insurance Health insurance Training & development Vision insurance Wellness resources The CNC Programmer will provide programming, planning, and machining expertise in support of the Manufacturing Department and client requests. Essential Functions: Plans machining activities by analyzing work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T) Develops CNC programs using Mastercam for 3-5 axis mills and multi axis Lathes based on engineering drawings and models Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs Sets up mills and lathes by installing and adjusting three and four jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes Maintains safe operations by adhering to safety procedures and regulations Creates set-up sheets for all programs generated Assists engineering in prototyping by quickly and accurately proving out programs for their designs and notifying them of any design flaws or machine constraints Sequence automatic machine operations and select cutting tools Follow all safety guidelines as outlined in the company safety manual Determines proper Tooling and design fixtures/work holding components for machining on mills, and lathes Follow all safety guidelines as outlined in the company safety manual Skills/Qualifications: High school diploma or equivalent, Associates Degree or certification in related field preferred 3 5 years CNC Programming experience in a manufacturing environment 3 5 years operating, troubleshooting, and set-up experience Experience with Mastercam or equivalent as well as fixture / tool design software Proficient understanding of G-Code and M-Code programming Ability to read and comprehend a variety of instructions and standard operating procedures Detailed knowledge of precision measuring equipment and the application of such instruments including but not limited to calipers, ID/OD micrometers, depth gauges and indicators