Computer numerical controller machinist jobs in Lancaster, CA - 148 jobs

CNC Programmer - Premier Motorsports CompanyLocation: Onsite in Santa Clarita, CADuration: 1-Year Contract (Possible 1-Year Extension) Hourly Pay: $35.00 - $48.00 DOE About the Role: Responsible for CNC programming using MasterCam and creating multi-axis tool paths using computer software to control machine tools for manufacturing high-performance racing engine components. Fixture and tooling design and CNC Setup and Operation.

CNC Set-Up Machinist Industry: Aerospace Manufacturing Schedule: • 1st Shift - 6:00 AM to 2:30 PM • 2nd Shift - 2:00 PM to 10:30 PM Compensation: $32.50/hr+ (DOE) Employment Type: Full-Time, Non-Exempt Department: CNC Machine Shop Reports To: CNC Shop Manager Position Summary A leading aerospace manufacturing organization is hiring CNC Set-Up Machinists to support production operations. This role partners with CNC Programming, Machining, Planning, and Quality to ensure machines are set up accurately, efficiently, and in alignment with production schedules and quality standards. Key Responsibilities • Set up CNC machines accurately to meet production schedules • Conduct daily machine observations and troubleshoot issues as needed • Support machinists in achieving throughput targets • Work cross-functionally to support monthly on-time delivery goals • Validate part conformity using handheld inspection tools and SPC • Read and interpret blueprints and GD&T requirements Knowledge & Skills • CNC programming background (preferred) • Experience machining and setting up aluminum, steel, castings, and forgings • Ability to read and interpret blueprints & GD&T • Ability to select tooling and work holding for proper set-up • Critical thinking and problem-solving skills • Strong communication skills; bilingual Spanish is a plus • Experience operating various HAAS and Fadal 3- & 4-axis machines (preferred) Minimum Requirements • High School Diploma or equivalent • Minimum 5 years of experience in the aerospace industry • Experience working in an AS9100 environment Preferred Certifications • GibbsCAM • Mastercam • GD&T Dimensional Certification Additional Information • Overtime may be required based on production needs • Responsibilities and requirements are subject to change KPG123

At Ensign-Bickford Aerospace & Defense Company (EBAD), we believe that our strengths are built on our most important resource - our people. Join EBAD and you'll be a part of a team who creates cutting edge technology that will blast us into the future. No other company can match the innovative energetic solutions that we provide. At EBAD you will actively contribute to successful missions putting men, women and satellites into space, and protecting our armed service men and women around the world. If this is the culture and work environment you are seeking, then EBAD is the place for you! Job Description EBAD seeks a qualified candidate for the position CNC Swiss Machinist, reporting to the Machine Shop Manager. The position is for 2nd Shift and is located in Moorpark, CA. The CNC Swiss Machinist is responsible for fabricating precision-machined parts by setting up and operating a Swiss style CNC machining center per work orders, routers, & blueprints. Parts are smaller in size, 12” max. Most runs are short, 10 to 500 pieces. Responsibilities: Complete tool, fixture, and material setup on CNC Swiss style machine. Running first piece article ready for inspection. Verifying parts by using precision measuring equipment. Changing tools and offsets based in cutting conditions. Using proper methodology and cutting tools to produce quality parts that adhere to production and quality standards. Using proper feed, speed, and other cutting parameters based on work piece matls such as aluminum, steel, stainless steel, titanium, etc. Revising programs as needed based on engineering or production required changes. Participating in troubleshooting on CNC programming and production related issues on the shop floor. Other similar or related duties as required. Requirements : Must be able to read and interpret engineering drawings and blueprints. Minimum 3 years experience in CNC operation with setup experience. Minimum 1 year experience operating a Swiss style machining center. Experience with Citizen A20, L20 or M32 machines a plus. Dual spindle lathe and 5 axis milling experience a plus. ESPRIT programming software experience a plus. General knowledge of GD&T, blueprint reading and inspection tools Must possess excellent verbal and written communication skills. Work with little or no supervision, previous lead experience a plus. Minimum High school education or equivalent. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate with others effectively in both written and verbal fashion. Must be able to meet all ITAR and BATFE background requirements Compensation: Salary Range: $40,000 - $90,000 per year. Salary is determined by the applicant's education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

Who is FMI? FMI Aerostructures is one of the largest independent manufacturing businesses serving the aerospace & defense industry. Our 250-member team has been a trusted supply chain partner that manufactures critical structural components and complex assemblies for major aerospace players for over 40 years. Why FMI makes a difference? Customers are at the center of everything at FMI. We are excited that this team can work with key partners like Northrop Grumman and Lockheed Martin using our critical components to help important new aerospace programs take flight. Our machinists are the best in the industry, and we are investing to support their continued success. When they win, our customers win. Why FMI could be the right fit for your career? This is an opportunity to work locally for a long-standing, stable business that is investing to grow. Summary: CNC Machinists are highly skilled professionals, able to work with great concentration and precision. They must be responsible and comply with all safety guidelines. A keen eye for detail and great mechanical aptitude are also essential. Essential Duties and Responsibilities: · Requires using hands to handle tools or controls · Requires repetitive movement · Must have vision (with or without assistance) capable of seeing small objects at a close distance · Requires prolonged standing/sitting · Requires lifting up to 25lbs Responsibilities: · Call up CNC programs · Set-up machine and produce parts · Set up equipment/machinery and install equipment or attachments on machinery or related structures · Read and understand job traveler instructions, technical drawings and set-up diagrams · Measure and record products or materials to control quality · Monitor machinery/equipment operation to detect problems · Use hand tools; Adjust production equipment / machinery setup · Load or unload material onto machinery · Clean equipment or machinery · Apply Procedures and Work Instructions Requirements: Required Skills / Experience: - Ability to read, comprehend and follow instructions and directions - Must be able to read, speak, write and understand English - Ability to read blueprints - Knowledge and the ability to read and understand 1/1000-, 1/100- and 1/10-inch measurements- G and M codes · Compare for correctness, count accurately · Good communication skills · Good interpersonal skills · Self-starter with demonstrated ability to achieve results · Basic mathematics for daily use formulas · Positive attitude, Team player, Manufacturing/CNC experience/background, Cleanroom experience · High school diploma, GED or five (5) years work experience. · This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Physical Demands The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk and climb or balance. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to high, precarious places and vibration. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually quiet to moderate. Compensation details: 22-40 Hourly Wage PIda4d762b75df-31181-37431773

The CNC Machinist produces machined parts by setting up and operating a computer numerical control (CNC) machine, maintaining quality and safety standards, keeping records and maintaining equipment and supplies. Essential Functions: - Understand work orders, blueprints, manufacturing orders, and machining parameters - Validate material used - Maintain specifications; Troubleshoot, detect malfunctions and take appropriate actions; Know when to replace worn tools - Listen to machining operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and compensate for problems - Measure dimensions of finished work pieces to ensure conformance to specifications using precision measuring instruments, templates, fixtures and knowledge of GDT standards - Maintain continuity among shifts by documenting and communicating actions taken thus far as well as any necessary further steps - Any other task assigned by supervisor or management Non-Essential Functions: - Maintain conscientious work behaviors including work ethic, safety standards, quality, costs, and On-Time Delivery (OTD) We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - 2+ years of experience machining with CNC Mills, preferably in aerospace manufacturing. Experience on 4-5 axis CNC Mills (Mazak machine, Fadal, Toyoda experience preferred). - Knowledge of various inspection equipment i.e. micrometers, calipers, and height gages; Knowledge of safety procedures and regulations; Knowledge of Geometric Dimensional Tolerancing; Understanding of cutting tool Geometry; Knowledge of tooling and coordination - Able to work quickly and efficiently through Process Improvement structure; Good verbal and written communication; Strong attention to detail and accurate record keeping - High School Diploma or equivalent - Experience working with Mazak, Fadal, or Toyoda CNC machines - Understanding of CNC G Code - Understanding of basic Math, Geometry and Trigonometry - Excellent teamwork skills

We are seeking an experienced 5 axis CNC Machinist, 2nd Shift for our South El Monte, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California and 1 location in Mukilteo, Washington. Location: South El Monte, CA Compensation & Benefits: * Medical, Dental, Vision * Company Paid Life Insurance * 401(k) Retirement Savings Plan * Paid Time Off (PTO) * Paid Holidays * Tuition Reimbursement* RESPONSIBILITY & AUTHORITY: * Maintain and Realize AS 9100 procedures and continuous improvement efforts. * Maintain a clean and organized work environment. * Keep the CNC clean and general maintenance up to date. * Keep machine fixtures clean and stored properly. * Work with Management to prioritize machine schedule. * Work with programmers in order to minimize set-up and manufacture time. * Order cutters and tooling as required to support manufacturing. * Operate the CNC. * Report to Management recommendations and / or concerns that will affect quality or time management. * Must understand how customer products are impacted in the event of failure. * Any other duties as required. KNOWLEDGE AND SKILL REQUIREMENTS: * Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management. * Must have experience with Siemens 840D and Fanuc 31i - B5 Controls. * Must have excellent blueprint interpretation skills. * Must have thorough understanding of machine set-ups, tooling, and cutters. * Must have direct communication with internal customers. * Must be trained of applicable changes & customer requirements. * Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: * High school graduate or equivalent work experience. * Adequate years of operating CNC equipment determined by Karman. PHYSICAL REQUIREMENTS: * Constant standing/walking/sitting for at least 8 hours. * Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs. * Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment. * Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement. * Prolonged periods of repetitive movement are required. * Constant holding, grasping, turning, or otherwise working with the hand(s). * Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: * This position operates in a warehouse/shop/manufacturing environment. As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. ITAR REQUIREMENTS: * To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Machinist II is responsible for performing basic machine setups and operating fabrication machinery. ESSENTIAL FUNCTIONS OF THE JOB: Performs simple setups and operates a variety of machines, tools and other equipment (with major focus on lathes, mills, grinders, honing machines, drill presses, but may also include hydraulic or pneumatic presses, bench grinders, deburring and polishing tools, and manual operations) to produce parts per instructions, blueprints or other technical drawings . Properly maintains and performs minor routine maintenance to machines utilized. Evaluates parts or material by measuring with appropriate instruments and may perform simple testing to validate parts or material conforms to requirements. Documents information as required per the work instruction or as instructed and reports any discrepancies to the supervisor, lead, and/or engineer. Maintains a safe work environment and adheres to all safety procedures and protocols, including the use of personal protective equipment (PPE). Supports area organization and fosters a continuous improvement mindset. Adheres to the company's policies and promotes a healthy and positive work culture The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 3-5 years of recent working experience in CNC Lathe. Completion of a 2 year technical/trade school in machining (preferred). KNOWLEDGE/SKILLS/ABILITIES: Must be able to read engineering blueprints and planning. A positive attitude, excellent communication skills, strong multitasking ability, and an interest in learning new skills/technologies required. MUST be well organized, works well with others and flexible. Broad skill set who is not afraid to tackle multiple tasks. Knowledge of tooling speeds and feeds offsets and minor program changes. Ability to prove out programs. Setup, program, and operate two CNC Lathes (Okuma). Perform tool adjustment as required. Work with Engineering to make tooling. Able to use inspections tool to inspect parts. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be a U.S. Person which is defined as a U.S. citizen, a lawful permanent resident [“green card” holders], U.S. National, Refugee, or Asylee. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Salary Range: $24-28 hourly. Relocation assistance not available and we are only considering local candidates. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

Sets Up and Operates CNC Machining Centers to produce parts to Customer Specifications. Loads and Runs as well as modifies CNC programs. De-Burrs parts and cleans as time allows. Inputs Simple Programs at the Operator panel and Loads and Off-Loads Production Programs. Creates Fixtures for Production Parts as necessary. Performs routine maintenance on Machining Centers. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Using written and verbal instructions and working from Blueprints Sets Up CNC Machining Centers for single parts and production runs. Submits First Article Parts to QC and analyses Inspection reports to adjust programs and set ups to produce an acceptable part. Use Band Saws and simple tools such as Hex Wrenches, Screw Drivers and Soft Hammers. Changes Dull Tooling and adjusts Machine Offsets. Checks Part Dimensions using Micrometers, Gage Pins Vernier Calipers, Drop Indicators, Comparators, Thread Gages and Various other Precision Tools. Records these Measurements as necessary on the Part Traveler. De-Burrs Parts to Customer Specifications and cleans the parts as necessary. Maintains a Clean Work Environment. Provide routine Maintenance on CNC Machining Centers. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Locations: Lancaster, PA Education and/or Experience: High School Diploma or GED. Trade School or Apprenticeship Program preferred or a minimum of 2 years' experience in a Metalworking CNC Environment. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate effectively to co-workers through Verbal and written communications as well as other employees of the organization. Ability to draft Work Instructions Using Microsoft Word. Mathematical Skills: Ability to calculate Machine Offsets using addition, subtraction, multiplication and division. A good understanding of Geometry and the ability to calculate angles. Ability to Calculate Feeds and Speeds as they relate to the Material being cut. Reasoning Ability: Ability to solve practical problems as well as Complex Fixturing problems. Ability to apply common sense when using equipment and making decisions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee frequently is required to stand, walk; and use hands to finger, handle, or feel. The employee is occasionally required to sit, the ability to stand for extended periods is required. The employee must occasionally lift and/or move up to 50 pounds and 70 pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually moderate. All Job Posting Locations (Location) Lancaster Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

A Conventional and CNC Machinist that works from blueprints, rough sketches, and verbal instructions to fabricate a variety of complex machined components. Performs non-repetitive assignments of a complex and difficult nature, involving the setup and operation of a wide variety of machine tools, such as lathe, mill, grinder, drill press, hand tools and CNCs. Knows the working qualities of a wide variety of materials including aluminum, stainless steel, brass and other materials. Type of Position: Temporary to Hire Hourly Rate: $25.00 - $40.00 Duties and Responsibilities • Studies specifications, such as blueprints, sketches, models, or descriptions and visualizes product to determine materials required and machines to be used to fabricate parts • Computer dimensions, plans layout, and determines assembly method and sequence of operations •Works with Engineering team to determine best possible machining methods •Sets up and operates machine tools, such as lathes, milling machines and grinders to fabricate parts and verifies conformance of machined parts to specifications •Verifies dimensions, alignments and clearances using measuring instruments, such as dial indicators, gauge blocks, thickness gauges, and micrometers •May examine previously used tools, jigs, fixtures and designs and modify parts •Assists Manufacturing Engineering in design and development of production jigs and fixtures •Performs other related duties as required and assigned Education and Experience • High School diploma required • 5 years related to high volume production Machine Shop experience • Aerospace or manufacturing experience preferred • Ability to demonstrate hands-on capability with programming and machine • Strong organizational, interpersonal, and communication skills, both oral and written • Proven ability to adapt to fluctuating work assignments and fast paced environments • Detail-oriented with sound judgment, great follow-through and initiative • Demonstrated ability to work well in a team environment, proactive, and work independently • Proficient in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk. The employee is occasionally required to stand and sit. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. ITAR Requirements To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Hydra Electric Company is an Affirmative Action and Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email ********************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ******************** or call ************. This email and phone number are created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Equal Employment Opportunity Posters

Manual Machinist Pay: $16.50 - $45.00 per hour Why Join Us? Are you a hands-on machinist who enjoys working with precision tools and creating high-quality parts? We are looking for a dedicated Manual Machinist to join our growing team! In this role, you will operate and maintain manual machines, including lathes, milling machines, and grinders, to create precision parts for aerospace applications. Responsibilities Operate manual lathes, mills, and grinders to machine parts to specifications Read blueprints and use shop math to ensure accuracy Set up tools, fixtures, and materials correctly Inspect parts for quality and make adjustments as needed Follow safety procedures and best machining practices Assist in process improvements and collaborate with the team Experience with CNC machines is a plus but not required Work with Hardinge lathes, Bridgeport mills, LeBlond lathes, and drill presses (experience preferred) What We Offer Training & Development: On-the-job training, vocational training, and up to $1,000/year for education Health Benefits: 100% paid medical, dental, and vision for employees 401K & Profit Sharing Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years Paid Holidays: 7 major holidays per year Work Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts Overtime Opportunities What You Need At least 1 year of manual machining experience or related training Ability to read and interpret blueprints Strong attention to detail and quality Knowledge of speeds, feeds, and tooling (a plus!) Physical Requirements Must be able to stand, walk, and use hands frequently Ability to lift up to 50 lbs as needed Be part of a supportive and skilled team that values precision, teamwork, and continuous learning. We believe in investing in our employees and providing a great work environment. Get a glimpse of our shop environment and culture by watching this video: ******************************************** Apply today! For more information on our benefits, visit: *************************************** 6:30 AM - 3:00 PM, Monday to Friday (with overtime opportunities)

Job Description Manual Machinist Pay: $16.50 - $45.00 per hour Why Join Us? Are you a hands-on machinist who enjoys working with precision tools and creating high-quality parts? We are looking for a dedicated Manual Machinist to join our growing team! In this role, you will operate and maintain manual machines, including lathes, milling machines, and grinders, to create precision parts for aerospace applications. Responsibilities Operate manual lathes, mills, and grinders to machine parts to specifications Read blueprints and use shop math to ensure accuracy Set up tools, fixtures, and materials correctly Inspect parts for quality and make adjustments as needed Follow safety procedures and best machining practices Assist in process improvements and collaborate with the team Experience with CNC machines is a plus but not required Work with Hardinge lathes, Bridgeport mills, LeBlond lathes, and drill presses (experience preferred) What We Offer Training & Development: On-the-job training, vocational training, and up to $1,000/year for education Health Benefits: 100% paid medical, dental, and vision for employees 401K & Profit Sharing Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years Paid Holidays: 7 major holidays per year Work Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts Overtime Opportunities What You Need At least 1 year of manual machining experience or related training Ability to read and interpret blueprints Strong attention to detail and quality Knowledge of speeds, feeds, and tooling (a plus!) Physical Requirements Must be able to stand, walk, and use hands frequently Ability to lift up to 50 lbs as needed Be part of a supportive and skilled team that values precision, teamwork, and continuous learning. We believe in investing in our employees and providing a great work environment. Get a glimpse of our shop environment and culture by watching this video: ******************************************** Apply today! For more information on our benefits, visit: *************************************** 6:30 AM - 3:00 PM, Monday to Friday (with overtime opportunities)

Set up and be able to operate all machines within the machine shop Set up and operate lathes and mills Set up and operate economy pointer Set up and operate slotters Set up and operate air chamber Set up and operate fillet roll Set up and operate traubs Set up and operate dye machine Set up and operate drill press Set up and operate auto pin machine Set up and operate button die and c-sink Set up and operate cut off saw Set up and operate chop off press Be familiar with and able to use dial calipers, mic and SPC computer Qualifications-Education/Experience Required: Qualifications-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required for this position Education and/or Experience-High school diploma or general education degree (GED), or five years related experience and/or training, or equivalent combination of education and applicable experience Language Skills-Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability tow rite routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization Mathematical Skills-Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Be able to read and interpret blue prints. Reasoning Ability- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Preferred: Travel Requirements 0%

Join ATC Automation as a Senior Machinist located in Simi Valley, CA We are seeking a skilled Senior Level Machinist to join our Tooling and Fabrication team in Simi Valley, CA. In this role, you'll set up and operate conventional and specialized machining equipment to fabricate both metallic and non-metallic parts. You will also program and operate CNC machines, Hybrid CNC Mill, Manual Mill, Lathe, grinders, bandsaws and other machine shop equipment based on project needs. This position requires strong knowledge of machine shop practices, materials, tooling, and layout techniques. With a competitive hourly rate ranging from $35-$40 depending on experience, your expertise will be valued and rewarded as you tackle challenges head-on in the ever-evolving automation industry. You can get great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Flexible Spending Account, Competitive Salary, and Paid Time Off. Take the next step in your career and become part of a forward-thinking culture that thrives on professional growth. Who We Are Since 1977, ATC has been redefining what's possible in industrial automation. From concept to commissioning, we partner with leading brands across the globe to design and deliver custom machinery that drives efficiency, precision, and long-term performance. Our automation expertise spans critical industries that shape the way we live and move-Life Science, Transportation, Consumer Products, and General Industry. Primary Responsibilities Read and interpret engineering drawings and specifications to determine part dimensions and tolerances. Program, set-up and operate HAAS CNC Machine and Hybrid CNC Mill. Set up and operate lathes, mills, and other conventional and manual machinery. Machine and grind components to precise specifications. Select or design, fab and install appropriate fixtures, cutting tools, and accessories. Calculate proper speeds and feeds based on material type and tooling. Use precision measuring instruments (e.g., micrometers, calipers, height gages) to verify part accuracy. Use computers to locate files, print drawings, and inspect 3D models using tools like eDrawings. CAD/CAM 5 year minimum (Master CAM or Rhino CAM a plus). Perform work assignments from the Working Foreman and collaborate with the team as needed. Physical Requirements Ability to stand for extended periods. Lift and move objects weighing: Up to 50 lbs occasionally. Up to 25 lbs frequently. Up to 10 lbs constantly. Use hands and fingers to handle or feel materials and tools. Ability to bend, push, pull, and reach overhead. Work Environment High noise levels from operating machinery. Exposure to physical hazards such as moving machine parts. Breathing fumes, dust, and mist; exposure to oils and fluids. Minimum Qualifications High school diploma or equivalent. 7-10 years of hands-on machining experience (Manual Machining or similar). 5-8 years of hands-on CNC programming and operating experience. Preferred Qualifications Vocational or technical certification in machining. 5-10 years of experience in a machining or fabrication environment. Exceptional math and mechanical aptitude. Clear written and verbal communication skills. Highly skilled with blueprint reading and 3D model interpretation. Team-oriented mindset and strong problem-solving skills. Ability to plan, multitask, and perform under pressure. Additional Skills & Traits Effective communicator-both written and verbal. Positive and professional demeanor. Reliable attendance and punctuality. Able to follow directions and work independently or as part of a team. Organized and detail-oriented. Ability to work efficiently in a fast-paced environment. Willingness to perform other duties as assigned by management. Machining-Specific Skills: Strong understanding of feeds and speeds for various tools, including: Endmills Drills Reamers Shell mills Ability to estimate machining times, including: Very basic profile parts More complex parts made from stainless steel or other hard materials Disclaimer: This has been designed to indicate the general nature and level of work performed by employees within this classification. It is not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this position. This job description is subject to change but will remain in effect until superseded or canceled in writing by Human Resources. ATC Automation is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. ATC Automation is the Automation segment of TASI Group. The TASI Group of Companies is comprised of four technologically advanced Strategic Business Segments commonly linked by a disciplined focus on Product Integrity, Package Integrity, and Automation. Each TASI company delivers world-class products and services, focusing on our global customer needs in diverse market segments. TASI has served several thousand global customers over the years and enjoys a very high rate of repeat customers, many of which are Blue Chip Global Companies. Major Markets include: Automotive, Medical Devices, Life Science, Pharmaceutical, Packaging, Oil & Gas, Food & Beverage, Consumer Goods and General Industrial Equipment. Job Posted by ApplicantPro

Operation of automatic and/or manual wire bond equipment in a clean-room environment, to manufacture high-reliability microelectronic devices. Essential Duties and Responsibilities: * Read and interpret assembly instructions, drawings and work instruction processes. * Set up and run automatic and manual wire bond equipment * Ability to handle computers in order to fine tune machine programs. * Written tests for ESD + wirebond and ribbon bond requirements. * Use tools such as fine tipped tweezers, x-acto knives, vacuum pencils, dental probes, calipers, scales. * Knowledge of periodic machines certification for bond strengths. * Inspect and know the difference between an acceptable epoxy placement, die attach assembly, sub attached assembly and wire bond and ribbon bonds on a microelectronic device, in conformance with work instructions, drawings and specifications. * Inspect - to the drawings/specs and procedures - the devices for defects before starting the assembly and after finishing his/her part of the assembly. * Adhere to all ESD and other handling requirements. * Comply with all in-house training as identified in job specific family and or specific training plan. * Follow company 6S and continuous improvement (kaizen) objectives. * Perform all other duties, as assigned.

Amca is building airplanes for the 21st century, starting by designing new hardware that flies on today's planes. Aviation was once humanity's boldest ambition, but the industry hasn't successfully built a new plane in 40 years. We don't think it has to be this way. Overview: You will work with tool makers and engineering teams to run prototype parts, develop tools, program prototype CNC machining operations, and roll out short run production parts to rapidly convert design ideas into prototypes. Responsibilities: Use in-depth familiarity of geometric dimensioning and tolerancing (GD&T) to machine tools, molds, and initial prototype parts based on desired final part geometries CNC Milling, Turning and Mill-Turn equipment programming and editing Creatively machine, fabricate and assemble plastic injection molds, prototype aerospace parts, short-run machined parts, tooling, and fixturing Perform manual milling, turning, grinding Go from rough engineering concept sketches to completed prototype parts, tools and fixtures as quickly as possible Provide and ensure adherence to tool and part Design for Manufacturability feedback Apply creative solutions to perform spur of the moment design and machining adjustments to achieve desired part outcomes in a fast-moving environment Assist with machine selection, initial machine setup and commissioning, and routine maintenance Qualifications: 5+ years of experience in machining, with a focus on aerospace or high-precision components. (Preference for 5-axis experience) Proficiency in CAM software (e.g., Mastercam, HyperMill, Esprit) and 3D CAD tools (e.g., SolidWorks, Siemens NX, Catia) Deep understanding of G-code, M-code, and CNC programming and editing Ability to learn and use a variety of software to observe, analyze, evaluate, and communicate pertinent information Strong knowledge of GD&T, blueprint interpretation, and tolerance stack-ups Hands-on experience with precision inspection tools (CMM, micrometers, calipers, dial indicators, depth and height gauges) Preferred experience: machining injection mold tooling, including wire and die sinking EDM This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or any individual who is granted U.S. permanent residence ("Green Card" holder); or any individual who is granted status as a "protected person" under 8 U.S.C 1324b(a)(3). The Advanced Manufacturing Company of America prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.

Operation of automatic and/or manual wire bond equipment in a clean-room environment, to manufacture high-reliability microelectronic devices. Essential Duties and Responsibilities: Read and interpret assembly instructions, drawings and work instruction processes. Set up and run automatic and manual wire bond equipment Ability to handle computers in order to fine tune machine programs. Written tests for ESD + wirebond and ribbon bond requirements. Use tools such as fine tipped tweezers, x-acto knives, vacuum pencils, dental probes, calipers, scales. Knowledge of periodic machines certification for bond strengths. Inspect and know the difference between an acceptable epoxy placement, die attach assembly, sub attached assembly and wire bond and ribbon bonds on a microelectronic device, in conformance with work instructions, drawings and specifications. Inspect - to the drawings/specs and procedures - the devices for defects before starting the assembly and after finishing his/her part of the assembly. Adhere to all ESD and other handling requirements. Comply with all in-house training as identified in job specific family and or specific training plan. Follow company 6S and continuous improvement (kaizen) objectives. Perform all other duties, as assigned. Qualifications Job Knowledge, Skills & Abilities: Perform general physical activities. Monitor processes, materials and surroundings. Ability to operate Plasma Cleaners, Auto wirebond, Ribbon bond and Bond Pull machines used for microelectronic devices: K&S1488, Palomar 2460, Palomar 8000, Palomar 9000 - auto wirebonders, Palomar 2470 - auto ribbon bonder and Dage 4000, Dage 2200, Unitek MicroPull III & IV bond pull machines or Equivalent. Minimum 2 years working experience as an Auto wirebonder/Auto ribbon bonder in a microelectronic assembly factory. Familiar with MIL-PRF-38534 requirements for microelectronics' assembly. Ability to work in a class 100,000 (class 8) clean room environment using clean room antistatic gowns, facemasks, hair covers etc. Ability to work with a 30X microscope throughout the day. Ability to work in manufacturing area with normal factory noise levels. Ability to work on a team and be a good team member. Ability to access documents using a computer Should not have a problem in using chemical based cleaning systems for cleaning build substrates etc. Sense of urgency, successful at meeting deadlines. Mechanical aptitude/dexterity and the ability to lift up to 20 lbs Fluency in English Language- Reading, written & spoken Education/Experience: High School Diploma /GED or equivalent experience Valid Permanent Resident or citizen of the United States of America Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3). Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, short-term and long-term disability insurance; voluntary supplemental insurances, flexible spending accounts and employee assistance program (EAP). Sick Leave, Vacation Time, and company-paid Holidays are also provided as paid time off. NEOTech also provides a 401(k) Retirement Savings Plan option with a company match. NEOTech is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law. NEOTech has a long-standing commitment to maintaining a safe, quality-oriented and productive work environment. We also want all employees to perform their duties safely and efficiently, in a manner that protects their interests and those of their co-workers. We recognize that alcohol and drug abuse pose a threat to the health and safety of NEOTech employees and to the security of the Company's equipment and facilities. For these reasons, NEOTech is committed to the elimination of drug and alcohol use and abuse in the workplace. NEOTech conducts pre-employment and post-accident drug screening.

The CNC Machinist produces machined parts by setting up and operating a computer numerical control (CNC) machine, maintaining quality and safety standards, keeping records and maintaining equipment and supplies. Essential Functions: - Understand work orders, blueprints, manufacturing orders, and machining parameters - Validate material used - Maintain specifications; Troubleshoot, detect malfunctions and take appropriate actions; Know when to replace worn tools - Listen to machining operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and compensate for problems - Measure dimensions of finished work pieces to ensure conformance to specifications using precision measuring instruments, templates, fixtures and knowledge of GDT standards - Maintain continuity among shifts by documenting and communicating actions taken thus far as well as any necessary further steps - Any other task assigned by supervisor or management Non-Essential Functions: - Maintain conscientious work behaviors including work ethic, safety standards, quality, costs, and On-Time Delivery (OTD) We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - 2+ years of experience machining with CNC Mills, preferably in aerospace manufacturing. Experience on 4-5 axis CNC Mills (Mazak machine, Fadal, Toyoda experience preferred). - Knowledge of various inspection equipment i.e. micrometers, calipers, and height gages; Knowledge of safety procedures and regulations; Knowledge of Geometric Dimensional Tolerancing; Understanding of cutting tool Geometry; Knowledge of tooling and coordination - Able to work quickly and efficiently through Process Improvement structure; Good verbal and written communication; Strong attention to detail and accurate record keeping - High School Diploma or equivalent - Experience working with Mazak, Fadal, or Toyoda CNC machines - Understanding of CNC G Code - Understanding of basic Math, Geometry and Trigonometry - Excellent teamwork skills

Job DescriptionDescription: Who is FMI? FMI Aerostructures is one of the largest independent manufacturing businesses serving the aerospace & defense industry. Our 250-member team has been a trusted supply chain partner that manufactures critical structural components and complex assemblies for major aerospace players for over 40 years. Why FMI makes a difference? Customers are at the center of everything at FMI. We are excited that this team can work with key partners like Northrop Grumman and Lockheed Martin using our critical components to help important new aerospace programs take flight. Our machinists are the best in the industry, and we are investing to support their continued success. When they win, our customers win. Why FMI could be the right fit for your career? This is an opportunity to work locally for a long-standing, stable business that is investing to grow. Summary: CNC Machinists are highly skilled professionals, able to work with great concentration and precision. They must be responsible and comply with all safety guidelines. A keen eye for detail and great mechanical aptitude are also essential. Essential Duties and Responsibilities: · Requires using hands to handle tools or controls · Requires repetitive movement · Must have vision (with or without assistance) capable of seeing small objects at a close distance · Requires prolonged standing/sitting · Requires lifting up to 25lbs Responsibilities: · Call up CNC programs · Set-up machine and produce parts · Set up equipment/machinery and install equipment or attachments on machinery or related structures · Read and understand job traveler instructions, technical drawings and set-up diagrams · Measure and record products or materials to control quality · Monitor machinery/equipment operation to detect problems · Use hand tools; Adjust production equipment / machinery setup · Load or unload material onto machinery · Clean equipment or machinery · Apply Procedures and Work Instructions Requirements:Requirements Required Skills / Experience: - Ability to read, comprehend and follow instructions and directions - Must be able to read, speak, write and understand English - Ability to read blueprints - Knowledge and the ability to read and understand 1/1000-, 1/100- and 1/10-inch measurements- G and M codes · Compare for correctness, count accurately · Good communication skills · Good interpersonal skills · Self-starter with demonstrated ability to achieve results · Basic mathematics for daily use formulas · Positive attitude, Team player, Manufacturing/CNC experience/background, Cleanroom experience · High school diploma, GED or five (5) years' work experience. · This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk and climb or balance. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to high, precarious places and vibration. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually quiet to moderate.

Join ATC Automation as a Senior Machinist located in Simi Valley, CA We are seeking a skilled Senior Level Machinist to join our Tooling and Fabrication team in Simi Valley, CA. In this role, you'll set up and operate conventional and specialized machining equipment to fabricate both metallic and non-metallic parts. You will also program and operate CNC machines, Hybrid CNC Mill, Manual Mill, Lathe, grinders, bandsaws and other machine shop equipment based on project needs. This position requires strong knowledge of machine shop practices, materials, tooling, and layout techniques. With a competitive hourly rate ranging from $35-$40 depending on experience, your expertise will be valued and rewarded as you tackle challenges head-on in the ever-evolving automation industry. You can get great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Flexible Spending Account, Competitive Salary, and Paid Time Off. Take the next step in your career and become part of a forward-thinking culture that thrives on professional growth. Who We Are Since 1977, ATC has been redefining what's possible in industrial automation. From concept to commissioning, we partner with leading brands across the globe to design and deliver custom machinery that drives efficiency, precision, and long-term performance. Our automation expertise spans critical industries that shape the way we live and move-Life Science, Transportation, Consumer Products, and General Industry. Primary Responsibilities * Read and interpret engineering drawings and specifications to determine part dimensions and tolerances. * Program, set-up and operate HAAS CNC Machine and Hybrid CNC Mill. * Set up and operate lathes, mills, and other conventional and manual machinery. * Machine and grind components to precise specifications. * Select or design, fab and install appropriate fixtures, cutting tools, and accessories. * Calculate proper speeds and feeds based on material type and tooling. * Use precision measuring instruments (e.g., micrometers, calipers, height gages) to verify part accuracy. * Use computers to locate files, print drawings, and inspect 3D models using tools like eDrawings. * CAD/CAM 5 year minimum (Master CAM or Rhino CAM a plus). * Perform work assignments from the Working Foreman and collaborate with the team as needed. Physical Requirements * Ability to stand for extended periods. * Lift and move objects weighing: * Up to 50 lbs occasionally. * Up to 25 lbs frequently. * Up to 10 lbs constantly. * Use hands and fingers to handle or feel materials and tools. * Ability to bend, push, pull, and reach overhead. Work Environment * High noise levels from operating machinery. * Exposure to physical hazards such as moving machine parts. * Breathing fumes, dust, and mist; exposure to oils and fluids. Minimum Qualifications * High school diploma or equivalent. * 7-10 years of hands-on machining experience (Manual Machining or similar). * 5-8 years of hands-on CNC programming and operating experience. Preferred Qualifications * Vocational or technical certification in machining. * 5-10 years of experience in a machining or fabrication environment. * Exceptional math and mechanical aptitude. * Clear written and verbal communication skills. * Highly skilled with blueprint reading and 3D model interpretation. * Team-oriented mindset and strong problem-solving skills. * Ability to plan, multitask, and perform under pressure. Additional Skills & Traits * Effective communicator-both written and verbal. * Positive and professional demeanor. * Reliable attendance and punctuality. * Able to follow directions and work independently or as part of a team. * Organized and detail-oriented. * Ability to work efficiently in a fast-paced environment. * Willingness to perform other duties as assigned by management. Machining-Specific Skills: * Strong understanding of feeds and speeds for various tools, including: * Endmills * Drills * Reamers * Shell mills * Ability to estimate machining times, including: * Very basic profile parts * More complex parts made from stainless steel or other hard materials Disclaimer: This has been designed to indicate the general nature and level of work performed by employees within this classification. It is not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this position. This job description is subject to change but will remain in effect until superseded or canceled in writing by Human Resources. ATC Automation is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. ATC Automation is the Automation segment of TASI Group. The TASI Group of Companies is comprised of four technologically advanced Strategic Business Segments commonly linked by a disciplined focus on Product Integrity, Package Integrity, and Automation. Each TASI company delivers world-class products and services, focusing on our global customer needs in diverse market segments. TASI has served several thousand global customers over the years and enjoys a very high rate of repeat customers, many of which are Blue Chip Global Companies. Major Markets include: Automotive, Medical Devices, Life Science, Pharmaceutical, Packaging, Oil & Gas, Food & Beverage, Consumer Goods and General Industrial Equipment.