Computer numerical controller machinist jobs in Saint Cloud, MN - 115 jobs

This position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, setup and operate equipment, and perform visual and dimensional inspections on machined components. Essential Functions * Must be knowledgeable of, and adhere to, the TOMZ Quality Management System. * Ability to operate and maintain production on equipment within the department. Ex. include Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, Willemin Mill turns, various 3-4-5 axis mills, Anodize/Passivation Lines. * Demonstrated ability to perform offsets and change tools to maintain efficient production with minimal support. * Ability to efficiently set up complex legacy components and complex new production orders and ensure the machine is ready for steady production. * Perform visual and dimensional inspections on manufactured components, as required using microscope, micrometer, caliper, pin gages, thread gages, comparator, micro-hite, CMM, vision system, etc. * Regularly and as prescribed, perform preventive maintenance of equipment. * Lead and train on problem solving activities for complex machine or process issues. * Completes and compiles necessary documentation related to Quality Inspection standards. * Ensure proper material control, identification and traceability is maintained for conforming and nonconforming material through the manufacturing processes. * Lead and train on Quality Best Practices and GDP/GMP continuous improvement efforts. * Utilize and navigate ERP and QMS systems to ensure inspection and traceability activities are properly documented and controlled, as needed. * Fit and assemble parts into complex assemblies when required. * Perform Zeiss (or similar) CMM Gage R&R activities for NPI. * Perform all AQL data needed when running production with all data entered to the ERP system. * Perform Qualification runs on NPI to the customers specifications. * Perform 1st article inspection with minimal support. * Provide guidance and training to Machinists level I, II & III. * Perform FANUC (or similar) robot adjustments on basic programs. * Must maintain safe working conditions and follow occupational Safety and Health requirements including Personal Protective Equipment (PPE) guidance and rules. * Other duties and responsibilities are assigned. Qualifications: Education * Certification from a Machine trades technical school program, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred). Experience * Certification from a Machine trades technical school program and ten years relevant work experience in a regulated medical manufacturing environment, or fifteen years in a regulated medical manufacturing environment. Qualifications * Class I, II and/or III Medical Device manufacturing experience. * Knowledge of and experience with GMP/ISO standards. * Advanced understanding of the usage and care of mechanical equipment and inspection processes. * Ability to use hand-held tools to perform preventive maintenance or repair activities and install or change tools. * Experience editing programs through machine controls. * "Hands-on" self-starter with ability to work both independently and as part of a team. * Ability to effectively read and understand blueprints, specifications, GD&T, and procedures. * Maintains accuracy and attention to detail at all times and completes tasks in a timely manner. * Ability to work with a variety of functional areas, including R&D, Manufacturing, and QA, as required, accomplishing results with minimal guidance. Preferred Skills * Intermediate skills with Microsoft Excel and Word * Strong verbal and written English language communication skills. Pay Range: $30 - $38 an hour

Job DescriptionTOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485. Summary of Position: Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within the Swiss machining department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment. Essential Functions: Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills. Perform offsets and tool changes to ensure efficient production with minimal support. Set up complex legacy components and new production orders for steady machine operation. Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. Perform scheduled and regular preventive maintenance on equipment. Drive problem-solving activities for complex machine or process issues. Complete and compile documentation related to quality inspection standards. Ensure proper material control, identification, and traceability for conforming and nonconforming materials. Support Quality Best Practices and contribute to continuous improvement in GDP/GMP. Capable of mentoring and training lower-level machinists. Facilitate a continuous improvement in culture and ensure quality and delivery objectives are met. Utilize ERP and QMS systems to document and control inspection and traceability activities. Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. Adhere to the TOMZ Quality Management System. Perform other duties as assigned. Qualifications: Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials. Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive. Knowledge of and experience with GMP/ISO standards. A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance. Advanced understanding of mechanical equipment usage, care, and inspection processes. Ability to use hand-held tools for preventive maintenance, repairs, and tool changes. Skilled in reading and understanding of blueprints, specifications, and procedures. Detail-oriented with the ability to maintain accuracy and complete tasks promptly. Proficient in identifying nonconformances and maintaining organization. Intermediate skills in GD&T. Education: Certification from a technical school program or equivalent, directly transferable work experience in a manufacturing or engineering discipline may be accepted. Certification from a technical school program is strongly preferred. Experience: Minimum of 3-7 years' experience in a regulated manufacturing environment. Preferred Skills: Strong verbal and written English language communication skills. Physical Requirements: Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead. 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products. Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required. Ability to sit or stand for prolonged periods. WEEKEND SHIFT: 20% DIFFERENTIAL 5AM-5PM FRI-SUN 2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM 1st shift- No differential Pay range: $31.00-$37.00 #SJ24

Job Title: CNC MachinistLocation: Sauk Rapids, MNCompensation: $21.59-$36.92 per hour - paid weekly Schedule: 2nd Shift | 3:00pm-11:00pm | Monday through FridayJob Type: Temp, Full-time About the OpportunityWe're hiring CNC Machinists for a manufacturing company in Osakis, MN. In this role, you'll set up and operate CNC machines to produce precision parts, ensuring quality and accuracy. If you have machining experience and enjoy hands-on technical work, this job could be a great fit.What You'll Do as a CNC Machinist: Study blueprints, sketches, and specifications to determine dimensions and tolerances Measure, mark, and scribe dimensions on materials or workpieces Select and secure fixtures, cutting tools, and materials on machines Calculate and set machining controls or enter commands for CNC programs Monitor machine operations, detect malfunctions, and make adjustments Verify finished workpiece specifications using precision measuring tools Perform trial runs to confirm machine settings and program accuracy Collaborate with engineers and production teams to resolve machining issues What You Need to Bring to the CNC Machinist Role: 2-year machining degree preferred 3+ years of CNC machining experience Basic computer skills Familiarity with CMM, GD&T, and SPC is a plus Why You'll Like Working With Doherty Staffing SolutionsEnjoy weekly pay, access to health coverage options through Benefits in a Card (including preventative and minimum value plans), and temp-to-hire opportunities for long-term stability where applicable. As a family-owned company with over 45 years in business, we pride ourselves on providing personalized support through a local, dedicated recruiter and maintaining a strong reputation backed by positive online ratings. We are committed to fostering an inclusive workplace and are proud to be an Equal Opportunity Employer, welcoming candidates from all backgrounds and experiences.Ready to Apply? Click “Apply Now” to complete our quick, mobile-friendly application. If you have questions about the CNC Machinist job, contact our Alexandria office at 320-763-3121. #WorkNow Doherty Staffing Solutions offers our valued contract employees health coverage through Benefits in a Card (preventative benefit and minimum value plans), along with weekly paychecks via a prepaid card from CHANGE. Learn more and find helpful links to additional resources at www.doherty.com/job-seekers/employee-benefits.

About rms Company rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Milling CNC Machinist Position Summary The Milling CNC Machinist operates CNC machines to support the manufacture of components and devices for the medical device industry. Shifts Available: 2nd Monday - Thursday 4:00pm - 2:00am Responsibilities Milling CNC Machinist Duties and Responsibilities Operate Milling CNC machines Perform quality inspection on completed parts Perform preventative maintenance on Milling CNC machines to ensure consistent machine performance Complete tool changes Qualifications Milling CNC Machinist Position Requirements Operator experience with Milling CNC machines Strong math background, preferable in machine math/shop math Understanding of Geometric Dimensioning and Tolerancing (GD&T) Ability to read and interpret blueprints Experience using a microscope Ability to read measurement equipment such as micrometer, caliper, pressure micrometer Milling CNC Machinist Preferred Knowledge, Skills and Abilities Machining experience with medical components, devices, or instruments Previous experience with tight tolerances Programming experience with Milling CNC Machines Experience with set-up on Milling CNC Machines Experience in troubleshooting of Milling CNC Machines rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k)-retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: Onsite Clinic Paid Parental Leave Monthly Social Events Annual Employee Appreciation Week Volunteer Opportunities Training and Development Opportunities Tuition Reimbursement Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $21.20 - USD $36.49 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485. Summary of Position: Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within a machining Department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment. Essential Functions: Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills.- Perform offsets and tool changes to ensure efficient production with minimal support. Set up legacy components and new production orders for steady machine operation.- Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. Perform scheduled and regular preventive maintenance on equipment. Drive problem-solving activities for complex machine or process issues. Complete and compile documentation related to quality inspection standards. Ensure proper material control, identification, and traceability for conforming and nonconforming materials. Support Quality Best Practices and contribute to continuous improvement in GDP/GMP. Utilize ERP and QMS systems to document and control inspection and traceability activities. Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. Adhere to the TOMZ Quality Management System. Perform other duties as assigned. Qualifications: Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials. Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive. Knowledge of and experience with GMP/ISO standards. A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with guidance. Understanding of mechanical equipment usage, care, and inspection processes. Ability to use hand-held tools for preventive maintenance, repairs, and tool changes. Effectively read and understand blueprints, specifications and procedures. Understanding of GD&T. Detail-oriented with the ability to maintain accuracy and complete tasks promptly. Identify nonconformances and maintain organization. Education: High school diploma, GED, or equivalent directly transferrable work experience (Manufacturing or Engineering discipline preferred). Certification from a technical school program preferred. Experience: Minimum of 2-5 years' experience in a regulated manufacturing environment. Preferred Skills: Strong verbal and written English language communication skills. Physical Requirements: Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead. 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products. Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required. Ability to sit or stand for prolonged periods. WEEKEND SHIFT: 20% DIFFERENTIAL 5AM-5PM FRI-SUN 2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM 1st shift- No differential Pay range: $23.50 - $30.50 Machines & technologies you'll use: CNC Mill (3-4 axis VMC) CNC Swiss Lathe (Citizen, Tsugami, Index) CNC Mill (5+ axis VMC)

Job Description DUTIES AND RESPONSIBILITIES: Operate Hurco CNC vertical machines using conversational programming and NC code generated from CAM software. Work effectively in a fast-paced, short-run style production environment with frequent part changes. Program new jobs while current parts are running to maximize machine utilization and throughput. Confirm machine and job assignments with leadership at the beginning of each shift or job. Produce precision parts to customer specifications and within acceptable production timeframes. Follow and execute all written and verbal instructions from documentation, including Shop Travelers, Inspection Sheets, blueprints, and work orders. Perform and document in-process inspections to ensure product quality. Communicate promptly with Quality Control, Supervisor, or Plant Manager regarding any part issues, non-conformances, or concerns. Unload and package finished parts according to JBT Machining and customer requirements. Maintain accurate daily records of job activities including quantities, run times, and scrap data in both Shop Travelers and the ERP system. Perform required preventative maintenance on assigned equipment; monitor machines for abnormal conditions and report issues to maintenance or leadership. Maintain a clean, organized, and safe work area in compliance with 5S procedures and JBT Machining Safety Policies. Use appropriate Personal Protective Equipment (PPE) and adhere to all company safety protocols. Maintain all required documentation in an accurate and timely manner. Perform other duties as assigned by supervisors or management. KNOWLEDGE, SKILLS AND ABILITIES: Gibbs or Hurco Conversational experience preferred. 3axis and 4axis vertical mill experience preferred. Experience working in a fast-paced environment. Problem-solving and attention to detail. The ability to multitask on a wide variety of projects. Candidates must support and promote our Cultural Tenets; Do the Right Thing, Trust, Put the Team First, Accountability, Collaboration, Communication, Clarity on Reality and Feedback. Contact us directly for a tour of our top-notch, environmentally controlled facility! Here's what we can offer: Medical, Dental, and Vision after 60 days of employment Competitive Wellness Program, providing up to 100% discount on medical premiums Short-Term and Long-Term Disability Supplemental Accident Insurance through Allstate for additional coverage on accidents + cancer Employer-Paid Life Insurance 401(k) after 60 days of employment + competitive match after one year Paid Time Off starting after 90 days of employment Paid Holidays starting day one! Health Savings Account and Flexible Spending Account Great discount programs in automotive, technology, and more Education Assistance is available for job-related courses to further your education, with up to 100% paid tuition for maintenance-related coursework and certifications Career Advancement Opportunities Teammate Assistance Program (TAP), which offers professional assistance for Counseling, Financial, Legal, and Family services Wage Range: $22.00 - $31.00/hour Shift: 1st (Monday-Thursday: 6am-4:30pm, Friday: 6am-11am) JBT Machining is a safety- sensitive workplace. All employment offers are contingent upon results of a 10-panel drug screening including marijuana. JBT Machining is an equal opportunity employer and considers all qualified applicants without regard to any classification protected by federal, state and/or local law.

We are seeking a skilled CNC Mill Machinist to join our team, focusing on operating and setting up Haas, Matsuura, and Makino CNC 3-, 4-, and 5-axis machining centers with Fanuc controls. You will perform precision machining on components for industries such as analytical instrumentation, life sciences, aerospace, defense, medical, and electronics. **Responsibilities** + Operate and set up CNC 3-, 4-, and 5-axis mill machining centers. + Perform precision machining on components for various industries. + Conduct multiple complex setups daily. + Work with materials including aluminum, stainless steels, engineered plastics, titanium, molybdenum, and hastelloy. + Handle short run machining, typically producing less than 100 parts. **Why Work Here?** Join a thriving, employee-owned company that emphasizes skill growth and values its employees. Once you become part of the team, you'll find a supportive environment where career longevity is common. **Work Environment** Work in a spacious and clean 90,000 square foot ISO:9001 certified job shop. The facility is designed for working on multiple parts daily, including some prototype work. **Job Type & Location** This is a Permanent position based out of Maple Grove, MN. **Pay and Benefits** The pay range for this position is $50000.00 - $70000.00/yr. ESOP 401k Health, dental and vision **Workplace Type** This is a fully onsite position in Maple Grove,MN. **Application Deadline** This position is anticipated to close on Feb 2, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Full-time Description At UMC, we don't just make products - we innovate, solve problems, and build a better future. As a proud, privately owned second-generation manufacturer, we've earned our reputation as leaders in our industry by producing highly complex parts with precision and ingenuity. What sets us apart? Our people. We're a passionate team that values collaboration, continuous learning, and going above and beyond. If this sounds like your kind of workplace, keep reading! Why UMC? Generous PTO: Start with 3 weeks of paid time off per year, with accrual starting on day one. Comprehensive Benefits: Medical, dental, vision, short- and long-term disability, and paid holidays. Competivie Pay: The position includes a 20% shift differential and an annual $3,000.00 retention bonus. 401k Match: Dollar-for-dollar matching up to 5%. Professional Growth: Tuition reimbursement for professional development. Work Schedule: Friday-Sunday, 4:00 am-4:30 pm or 5:00am-5:30pm, onsite in Monticello, MN. About the Role As a Swiss CNC Machinist, you will play a key role in the daily operation and setup of Swiss CNC machines, ensuring quality, precision, and efficiency in our manufacturing processes. You will be responsible for meeting production goals, troubleshooting processes, and maintaining a safe, high-performing work environment. If you enjoy working with cutting-edge technology, solving problems, continuously improving processes, and are aligned with our core values- Great People, Going Beyond, and Growing -we would love to have you join our team. What You'll Do Independently set up and operate machines for various jobs, ensuring adherence to company quality standards and production efficiency. While seeking assistance from a supervisor or senior machinist for advanced setups, as needed. Troubleshoot production issues with support from Senior Machinist, Supervisors, and Engineers to ensure smooth production flow. Conducted in-process inspections of machined products, documenting results to ensure products met specifications. Assist Junior Machinists and Production Operators in diagnosing and resolving technical issues that arise during machining operations, to enhance team competency and flexibility. Maintain a safe working environment, upholding a proactive safety culture by identifying and addressing potential hazards. Requirements Education and Experience: Associates degree in Machining or related field or work experience in place of education. 2+ years' experience as a machinist Citizen or Star Swiss Machining experience preferred. Skills and Competencies: Ability to express ideas, share information, listen actively, and demonstrate professionalism in written and verbal communication. Able to read and interpret blueprints, use simple math to perform basic calculations, and use hand-held measuring tools. Basic knowledge of CMM, VCMM, and GD&T. Promotes a sense of urgency to expedite work through area while maintaining quality standards. Strong mechanical aptitude. Excellent attention to detail and problem-solving skills. Able to make effective and timely decisions. Ability to work independently and as part of a team. Able to work efficiently with minimal supervision. Embodies the personal commitment to the shared core values of UMC: Great People, Going Beyond, and Growing. Culture Fit: You're a team player who thrives on collaboration. You bring a growth mindset and embrace challenges with grit. You care deeply about delivering excellence and going beyond expectations. Ready to Join a Winning Team? If you're passionate about building relationships, solving problems, and contributing to a culture of innovation, UMC is the place for you. Let's grow together - apply today and make an impact! UMC is an Equal Employment Opportunity Employer Salary Description $31.82-$47.10/hour Differential Included

DUTIES AND RESPONSIBILITIES: Operate Hurco CNC vertical machines using conversational programming and NC code generated from CAM software. Work effectively in a fast-paced, short-run style production environment with frequent part changes. Program new jobs while current parts are running to maximize machine utilization and throughput. Confirm machine and job assignments with leadership at the beginning of each shift or job. Produce precision parts to customer specifications and within acceptable production timeframes. Follow and execute all written and verbal instructions from documentation, including Shop Travelers, Inspection Sheets, blueprints, and work orders. Perform and document in-process inspections to ensure product quality. Communicate promptly with Quality Control, Supervisor, or Plant Manager regarding any part issues, non-conformances, or concerns. Unload and package finished parts according to JBT Machining and customer requirements. Maintain accurate daily records of job activities including quantities, run times, and scrap data in both Shop Travelers and the ERP system. Perform required preventative maintenance on assigned equipment; monitor machines for abnormal conditions and report issues to maintenance or leadership. Maintain a clean, organized, and safe work area in compliance with 5S procedures and JBT Machining Safety Policies. Use appropriate Personal Protective Equipment (PPE) and adhere to all company safety protocols. Maintain all required documentation in an accurate and timely manner. Perform other duties as assigned by supervisors or management. KNOWLEDGE, SKILLS AND ABILITIES: Gibbs or Hurco Conversational experience preferred. 3axis and 4axis vertical mill experience preferred. Experience working in a fast-paced environment. Problem-solving and attention to detail. The ability to multitask on a wide variety of projects. Candidates must support and promote our Cultural Tenets; Do the Right Thing, Trust, Put the Team First, Accountability, Collaboration, Communication, Clarity on Reality and Feedback. Contact us directly for a tour of our top-notch, environmentally controlled facility! Here's what we can offer: Medical, Dental, and Vision after 60 days of employment Competitive Wellness Program, providing up to 100% discount on medical premiums Short-Term and Long-Term Disability Supplemental Accident Insurance through Allstate for additional coverage on accidents + cancer Employer-Paid Life Insurance 401(k) after 60 days of employment + competitive match after one year Paid Time Off starting after 90 days of employment Paid Holidays starting day one! Health Savings Account and Flexible Spending Account Great discount programs in automotive, technology, and more Education Assistance is available for job-related courses to further your education, with up to 100% paid tuition for maintenance-related coursework and certifications Career Advancement Opportunities Teammate Assistance Program (TAP), which offers professional assistance for Counseling, Financial, Legal, and Family services Wage Range: $22.00 - $31.00/hour Shift: 1st (Monday-Thursday: 6am-4:30pm, Friday: 6am-11am) JBT Machining is a safety- sensitive workplace. All employment offers are contingent upon results of a 10-panel drug screening including marijuana. JBT Machining is an equal opportunity employer and considers all qualified applicants without regard to any classification protected by federal, state and/or local law.

Job Description Prototype CNC Machinist 1st Shift Monday - Friday The Prototype CNC Machinist is responsible for engineering, manufacturing, and fabricating new parts, retrofitting and repairing parts per prints or samples, in order to create a product according to customer specifications. Primary Responsibilities: Engineer the appropriate machining process using experience, guidance from the project manager/department lead, and company established procedures and "best practices". Program, set up and machine parts from billet and plate materials. Establish design competency with Fusion 360 and/or PowerShape and programming competency with Fusion 360 and/or PowerMill. Design & build machining fixtures via CAD for the secondary machining of castings or billet/raw stock materials as necessary. Program machining parts (via CAM). Set-up tooling and CNC machines for secondary machining operations on prototype castings and billet/raw stock material. Run set-up parts through each operation and work with quality to gain buyoff at each phase. Run the balance of parts on order through the machining operations. Deburring, cleaning, and packaging of parts for shipment. Teardown of tooling and fixtures and cleaning of the mills. Assist in machining of production tooling components as necessary. Other Job Duties: Ensure jobs are completed efficiently and in a timely manner, consistent with the quoted hours and materials for the job. Communicate delivery updates and potential delays with the Project Manager including if a job will run over or cannot be completed within the time allotted. Meet frequently (at least biweekly) with department lead to address any concerns and/or pass on concerns to management. This may include: machine availability, material resources, tools or tooling, quality, design, work flow, and man power needs and availability. Actively participate in the material management system. (Kan-ban cards) Work with quality to ensure job requirements are met. Ensure clean & safe workplace. Other jobs and duties as assigned by supervisors or management. Adhere to the rules and conventions established by the Machining Work Instruction. Minimum Education: trade school and 2 years of experience or equivalent. Preferred Education: A relevant 2-year technical or equivalent degree Minimum Skills/Experience: one year in similar position, mechanical aptitude, effective computer use, basic Math skills, independent decision-making, and effective self-management. Preferred Skills/Experience: Above plus - Strong Computer and math skills, and three or more years of relevant experience gained through on the job instruction, apprenticeship programs, and increasingly more complex assignments, strong mechanical aptitude as demonstrated through success at increasingly more complex assignments. The Company: Craft, based in Montrose, MN, is a rapid prototyping and complex metal and plastics component manufacturer. Craft has over 30 years of industry experience and has established itself, along with its skilled employees, as a leader in delivering high-quality parts to customers. Le Sueur Incorporated("LSI"), a portfolio company of Delos Capital, and a leading supplier of complex aluminum castings, machined castings, and plastic injection molded components. Job Posted by ApplicantPro

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Milling CNC Machinist Position Summary The Milling CNC Machinist operates CNC machines to support the manufacture of components and devices for the medical device industry. Shifts Available: 2nd Monday - Thursday 4:00pm - 2:00am Responsibilities Milling CNC Machinist Duties and Responsibilities * Operate Milling CNC machines * Perform quality inspection on completed parts * Perform preventative maintenance on Milling CNC machines to ensure consistent machine performance * Complete tool changes Qualifications Milling CNC Machinist Position Requirements * Operator experience with Milling CNC machines * Strong math background, preferable in machine math/shop math * Understanding of Geometric Dimensioning and Tolerancing (GD&T) * Ability to read and interpret blueprints * Experience using a microscope * Ability to read measurement equipment such as micrometer, caliper, pressure micrometer Milling CNC Machinist Preferred Knowledge, Skills and Abilities * Machining experience with medical components, devices, or instruments * Previous experience with tight tolerances * Programming experience with Milling CNC Machines * Experience with set-up on Milling CNC Machines * Experience in troubleshooting of Milling CNC Machines rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k)-retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $21.20 - USD $36.49 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Assurance Manufacturing is an employee-owned precision sheet metal fabrication, stamping, machining, and assembly company that operates in a modern manufacturing facility. We are looking for a CNC Set Up Machinist person for our 1st shift at our Coon Rapids facility. We offer a comprehensive compensation and benefit package that includes medical/HSA, dental, STD, LTD, basic life, voluntary life, 401k with company match, Employee Stock Ownership Plan (ESOP) and discretionary bonus potential. CNC Set Up Machinist Responsibilities: Responsible for setting up the machines utilizing the approved CNC program and working with Quality to validate that the first piece meets requirements Runs CNC machines and checks parts periodically to confirm conformance to drawing requirements. Maintains clear and honest communication at all times. Keeps the work environment safe. Learns and applies the latest relevant knowledge to the work. Follows work order procedures and routings; gather required tools and materials based on instructions, drawings, and specifications provided for the job. Maintains, organizes, and cleans equipment and the work area. Notifies supervisor when faulty equipment or defective materials are discovered. Follows Control of Nonconforming Product Procedure. Follows procedures in relation to inspection of parts including first piece approval. Cross Trains in other areas of the plant as necessary to meet production demands. Adheres to all safety rules and guidelines. Other duties as assigned. CNC Set Up Machinist Qualifications: High school diploma or equivalent required. Certificate in machine shop technology or machine tool technology/machinist required. 1-2 years' experience as a set-up machinist is preferred. Strong analytical, communication, and computer skills. Attention to detail and self motivation Good teamwork skills Ability to multitask Basic understanding of technical plans, drawings, models and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics. Ability to measure parts with calipers and micrometers. Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Assurance Manufacturing 9010 Evergreen Blvd NW, Coon Rapids, MN 55433 We participate in E-Verify

Job Description Dahlquist Machine Dahlquist Machine by Fathom is the premier precision machining company in America with over 30 state-of-the-art CNC mills and lathes paired with over 50 years of industry experience. Centrally located in a northern suburb of Minneapolis, Dahlquist Machine produces high-quality products with 100% on-time delivery-specializing in short- to medium-run quantities for high precision light metals, aluminum, and plastic parts. Fathom Manufacturing Fathom is one of the largest digital manufacturing platforms offering on-demand manufacturing in North America. With more than 90 large-platform industrial-grade 3D printing machines and a national footprint with more than 500,000 square feet of manufacturing capacity across 12 facilities, Fathom seamlessly blends in-house capabilities across plastic and metal additive technologies, CNC machining, injection molding & tooling, urethane casting, sheet metal fabrication, and design and engineering. Turning Machinist Position Summary: The CNC Turning Machinist plays a critical role in producing high-quality, intricate parts within a dynamic, fast-paced manufacturing environment. This position requires proficiency in setting up and operating CNC turning machine centers-specifically Doosan and DMG Mori with twin-spindle capabilities-alongside MDI (Manual Data Input) programming and precise manual inspection techniques. By leveraging strong problem-solving skills and close attention to detail, the Machinist will work with diverse materials (aluminum, plastic, and steel), troubleshoot issues, and drive continuous improvement throughout the machining process. By collaborating with cross-functional teams and maintaining clear communication across shifts, the CNC Turning Machinist ensures all parts meet Dahlquist Machine by Fathom's rigorous quality standards and on-time delivery commitments. This role demands the ability to make critical decisions under pressure, a commitment to safe work practices, and adherence to company EH&S policies. Through expert technical knowledge and dedication to efficiency, the CNC Turning Machinist contributes to Dahlquist Machine by Fathom's growth and aligns with Fathom's on-demand manufacturing vision. Key Responsibilities: Set up and operate CNC turning machine centers (Doosan and DMG Mori) with twin-spindle capabilities, live tooling, and bar feeders Perform MDI (Manual Data Input) programming for efficient part production Conduct manual inspections using gauges and instruments to verify part quality prior to CMM inspection Interpret complex 2D drawings, applying GD&T principles Monitor parts throughout the machining process to ensure accuracy and consistency Adhere to company quality and safety procedures Communicate and collaborate with team members to troubleshoot issues and optimize performance Participate in Lean manufacturing events to drive process improvements Qualifications/Requirements: Associate degree in a relevant field, or 3+ years of experience in milling, or 5+ years of overall CNC machining experience Familiarity with Doosan or DMG machines preferred Experience with various materials, such as aluminum, plastic, and steel Ability to read and interpret blueprints Proficiency in manual inspection using gauges and instruments in support of CMM inspection Strong work ethic and attention to detail Ability to thrive in a fast-paced, team-oriented environment Capable of handling sensitive and confidential information Good communication skills for effective teamwork Hours: 5:45a.m. - 3:45 p.m. Monday - Thursday Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job Description CNC Lathe and Mill Machinist / 2nd Shift Envision your machining experience at work with an industry leader! Enjoy a supportive and inclusive atmosphere with a wide-ranging benefits package, and excellent job security! For over 70 years, Tolomatic has been a family-owned company and over that time has become an innovative leader in pneumatic and motion control products with a global reach. Take advantage of this opportunity to use your machining skills while working on a variety of made-to-order projects. As a part of the team, you will enjoy: A clean, modern, climate-controlled work environment. Convenient location off Highway 55 offering an easy commute. Starting Pay Range of $23.00 to $36.00 an hour - DOE. Great employee benefits including: Medical, Dental, Disability, Life, PTO, Profit Sharing, 401K Plan, Annual Bonus and Tuition Reimbursement. Real, achievable advancement opportunities. Due to rapid growth, Tolomatic is looking for CNC Lathe and Mill Machinists for our 2nd shift: 2nd Shift hours are 3:25pm to 1:55am Monday-Thursday OR 3:25pm to 11:55pm Monday-Friday ($1.50/hour Shift Premium) Signing bonus available up to $6,000 depending on shift. About You: Ability to set up CNC lathes and mills Two year Machine Tool diploma or degree or equivalent experience (preferred) Assist with fabricating new components per Engineering drawings Ability to verify work using various measurement methods Work on jobs according to due date as provided using scheduling system Report job progress using current scheduling system Working knowledge of GD&T Basic computer skills Primary Objective: Our Machinists setup and operate CNC vertical and horizontal mills and lathes to perform routine or repetitive operations in a manner which consistently meets customer specifications, quality requirements, and production standards. The Company: Tolomatic is a leading supplier of electrical linear actuators and electric linear motion control and pneumatic actuators and cylinders. Tolomatic has earned its industry-wide reputation for designing and manufacturing highly durable and reliable electric linear and pneumatic actuators, and power transmission products for a variety of industries including packaging, material handling, medical, food processing, automotive, semiconductor, and general automation. If you have previous experience as a CNC Lathe and Mill Machinist, we want to hear from you! Do not miss out on this opportunity. Join the Tolomatic team today! All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. Powered by JazzHR 5vqSqXUuA6

MultiSource Manufacturing LLC is a customer-focused contract manufacturer working to provide high quality engineering and fabrication services. We strive to be a comprehensive resource for all the services you need from hands-on project management to industry standardized installation. For precision machining to complete assembly, MultiSource is your one-stop-shop for quality, efficiency, and excellence in manufacturing. JOB DESCRIPTION: Sets-up, operates, and verifies the quality of work on a wide variety of Swiss CNC machines involving close tolerances and difficult set-ups. Performs routine or repetitive operations in a manner which will consistently meet quality requirements and production standards. Actively participates in continuous improvement activities. SCHEDULE: 1st shift; Monday-Friday, 7:00am-3:30pm ESSENTIAL FUNCTIONS AND BASIC DUTIES: Monitors variations in sequence, e.g., positioning, cycle time, etc., and makes necessary corrections. Performs repeat set-ups without supervision. May perform more complex set-ups with supervision. Works from drawings and/or specifications with direction from the Team Leader. Troubleshoots routine jobs without supervision and more complex jobs with supervision. Runs production and deburrs parts as required. Studies specifications, blueprint, drawings or sample prototypes to determine dimensions and tolerances of finished parts. Select and align tooling, fixtures and attachments for machining. Adjust machine to produce a conforming product. Perform in-process inspection of own work while running machine. Complete required paperwork and keep material and paperwork organized. Maintains work area in a neat and orderly condition. Works safely, and complies with all established safety rules and work practices. Maintain and care for all shop tools, machines and equipment. Conform to the company quality system as documented. QUALIFICATIONS: EDUCATION/CERTIFICATION: High school education or equivalent, plus at least 2 years of Vo-Tech training in machine tool technology or a related area or equivalent. EXPERIENCE REQUIRED: At least 5 to 7 years of Swiss machine set-up and operating experience in a job shop environment. PHYSICAL STRENGTH: Lift up to 40 pounds. LANGUAGE ABILITY: Ability to understand and follow instructions in English. SKILLS ABILITIES: Very strong mechanical aptitude and problem-solving skills. REQUIRED KNOWLEDGE: Ability to read blueprints and use measuring instruments. BENEFITS AND COMPENSTION: MultiSource Manufacturing LLC offers competitive salaries and benefits - many benefits begin the first of the month after 30 days of employment. Benefits include: medical, dental, vision, life insurance, 401(k), paid time off, and much more!

“Work Hard, Play Hard!” “Fun products!” “Work as a team” “Monthly picnics”. These are just some things our employees say about why they work here. What will you say?! Known for some of our larger brands- Otter Outdoors, Beavertail, DOA Decoys and Wave Armor- we are a 30 year old company that is booming with growth. This family owned, fast paced company is looking for a CNC Machinist to assist us in our rapid growth. Ideal candidates are self-motivated and positive team players. Check us out at ****************** POSITION SUMMARY The primary functions of this position are to set-up, and machine tooling per the print or per the verbal instruction given. DUTIES AND RESPONSIBILITIES Set up / Operate machines and corresponding jobs of moderate complexity and difficulty. Experience with Mill, Set up/operations is required. Experience with Lathe would be helpful. Meet expectations for productivity and quality and strive for continuous improvement. May train others, troubleshoot, or work with teams as needed. Participate in continuous improvement and be a Safety Leader. Follow guidelines established for work scheduling and understand delivery objectives. Communicate pertinent information well with others and is a team player. Good work ethic and maintains good attendance. Report any machine or process problems. Able to perform multiple tasks running several machines simultaneously. Education and Experience: High school diploma, College diploma preferred. Minimum of 3 to 5 years' experience with operation/set-up of CNC Machines. Minimum of 2 years of manufacturing related experience. Must be willing to further college education and/or professional development. Programming using Master Cam software off CAD/3D Models would be a plus but not a requirement for this position. Job Knowledge, Skills and Abilities: Effective oral and written communication skills. Ability to read/create/understand work instructions read prints. Must have mechanical aptitude, good attention to detail, ability to perform basic math computations and computer data entry. Ability to use measuring devices (calipers, etc.) and hand and power tools (drills, etc). Good visual ability to detect quality defects. Willing and able to read and interpret operating manuals and engineering standards. Effective analytical and problem-solving skills. Physical Requirements: Ability to walk and stand for extended periods of time. Exposure to shop elements such as noise, dust, odors, heat and cold. Ability to lift 50 lbs. and walk and stand during entire shift YOU MAY BE ELIGIBLE FOR A $5,000 SIGN ON BONUS! 1/2 PAID IN 90 DAYS, FINAL 1/2 PAID IN 180 DAYS!

About the Role We are seeking a detail-oriented and experienced CNC Programmer to join our team. In this role, you will be responsible for developing and optimizing CNC programs for precision machining operations. This is an exciting opportunity to contribute to high-quality manufacturing processes and support continuous improvement in a modern, climate-controlled facility. Key Responsibilities Create, modify, and optimize CNC programs for milling, turning, and multi-axis machines Interpret technical drawings, blueprints, and CAD models to develop machining strategies Select appropriate tools, speeds, and feeds for efficient and accurate machining Collaborate with machinists and engineers to troubleshoot and improve processes Maintain documentation for programs, setup sheets and tool lists Ensure compliance with safety and quality standards Qualifications Required: Associate degree or technical certification in CNC programming, machining, or related field 3+ years of experience in CNC programming and setup Proficiency with G-code, CAM software (e.g., GibbsCAM), and CAD tools Preferred: Experience with multi-axis machining and high-precision components Familiarity with ISO quality standards and lean manufacturing principles Skills & Competencies Strong understanding of machining processes and materials Excellent problem-solving and analytical skills Attention to detail and commitment to quality Effective communication and teamwork abilities What We Offer Competitive salary Career Development and Cross-Training Opportunities Health Insurance (Medical, Dental, Vision) Simple IRA and Roth IRA options with company contributions Paid Time Off (Vacation, Sick Leave, Holidays) Paid Term Life and Long-Term Disability Insurance Modern, Climate-Controlled Facility Monday - Thursday 6:00am - 4:15pm 40 hours/week with OT available

Production Scheduler Job Description (P&F Machining, Otsego, MN) We are seeking a highly motivated and experienced Production Scheduler to join our precision machining facility in Otsego, MN. The ideal candidate will be a critical thinker with exceptional organizational skills, a strong background in manufacturing production planning, and essential proficiency with the Epicor ERP system. This role is crucial for optimizing our CNC machining, turning, milling, and assembly operations to ensure we meet customer delivery requirements and maximize efficiency. Key Responsibilities Production Scheduling & Planning: Develop, implement, and maintain the daily and weekly production schedule for all machining and assembly work centers, focusing on CNC Milling, Turning, and Swiss Machining capabilities. Utilize Epicor to perform finite capacity scheduling, balancing customer demand, machine capacity, tooling availability, and material constraints. Adjust production schedules in real-time to mitigate delays caused by equipment breakdowns, material shortages, or engineering changes, communicating impacts to relevant stakeholders (Sales, Customer Service, Production/Operations). Minimize setup times and changeovers through effective sequencing and grouping of work orders within the schedule. Materials Management & Inventory Control: Collaborate with Purchasing to ensure the timely availability of raw materials, components, and tooling needed to support the production schedule. Monitor and manage Work-in-Progress (WIP) and finished goods inventory levels to prevent shortages or overstock situations. Support the accuracy of inventory data by monitoring material consumption and investigating discrepancies in Epicor. Process Improvement & Reporting: Analyze production specifications, historical data, and plant capacity to identify bottlenecks and recommend improvements to manufacturing processes and lead times. Generate and distribute regular reports on schedule attainment, on-time delivery performance, capacity utilization, and potential risks to management. Required Skills and Qualifications Experience: Minimum of 3-5 years of experience in production planning or scheduling, preferably in a high-mix, low-volume job shop environment or precision metal machining industry. Demonstrated proficiency in using Epicor ERP for scheduling, Material Requirements Planning (MRP), capacity planning, and work order management is mandatory. Technical Knowledge: Strong understanding of CNC machining processes (Milling, Turning, Swiss). Knowledge of supply chain principles, including forecasting, inventory control, and logistics. Soft Skills: Exceptional analytical, problem-solving, and decision-making abilities to handle scheduling conflicts under pressure. Excellent written and verbal communication skills to coordinate effectively across departments (Production, Engineering, Sales). Education: Associates or Bachelors degree in Supply Chain Management, Manufacturing, Business Administration, or a related technical field is preferred. Relevant experience may substitute for a degree. Core Skills & Keywords for ATS Candidate Search 1. Production Planning & Scheduling Use these to surface candidates with relevant hands-on experience: Production Scheduling Production Planner / Scheduler Finite Capacity Scheduling Master Scheduling Daily/Weekly Scheduling Work Order Management Capacity Planning MRP / Material Requirements Planning Shop Floor Scheduling 2. ERP & Technical Tools Since Epicor expertise is required: Epicor (mandatory) Epicor ERP Scheduling Epicor MRP ERP Systems (secondary) Manufacturing ERP 3. CNC & Manufacturing Knowledge Candidates with machining or job-shop background: CNC Machining CNC Milling CNC Turning Swiss Machining Precision Machining Job Shop Environment High-mix Low-volume Manufacturing Operations 4. Materials & Inventory Management To find candidates with supply chain alignment: Materials Planning Inventory Control WIP Management Raw Materials Coordination Material Shortage Resolution Supply Chain Coordination 5. Analytical & Process Improvement Skills Search terms that reflect problem-solving ability: Process Improvement Bottleneck Analysis Capacity Utilization Scheduling Optimization Root Cause Analysis Continuous Improvement 6. Communication & Cross-functional Skills Useful for filtering resumes with strong soft skills: Cross-functional Communication Stakeholder Coordination Production Reporting Scheduling Communication Team Collaboration 7. Education & Experience Keywords Helpful ATS filters: Bachelors in Supply Chain Management Associates in Manufacturing / Business 3-5 years Production Planner experience Manufacturing Scheduler

NOW HIRING: We are looking for a Lathe Machinist 2 or 3 to join our 2nd shift Circular Products (CP) Winsted team. The Lathe Machinist 2 or 3 is responsible for set ups, operating and monitoring CNC Vertical Turning Centers, Vertical and Horizontal Milling Centers and manual machining centers in the manufacture and production of various products in accordance with product specifications. Job Title: Machinist 2 or 3 Location: onsite in Winsted, MN Salary Range: $25.50 - 33.00 per hour (Non-Exempt)(In compliance with Minnesota Pay Transparency Law, this range reflects the anticipated compensation for this role. Actual pay may vary based on experience, education, and other factors.) Shift Schedule : 2nd shift Monday - Thursday 3pm - 1am Shift Differential : 2nd shift - $1.50/hour As an Experienced Machinist 2 or 3, you will: Select appropriate tooling and inserts Calculate and set controls to regulate machining Sets up and operate machines on trial run to verify the accuracy of machine settings or programmed control data Start and observe machine operations to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required Use a crane, hoist, forklift, or other material handling equipment to transport materials and products into and out of the work area as required Monitor the production board and internal paperwork from the supervisor to perform tasks in the designated sequence Verify end parts are consistent with blueprint specifications Accurately label all parts that require a classification for routing to the next operation Confer with engineers, production personnel, programmers, or others to resolve machining or assembly problems Expresses logic in the determination of method/sequences of operations and selection of materials Troubleshoot machine issues and perform tool changes, tool wear offsets or change inserts Performs prescribed preventative maintenance on machines as required Complete set ups and teardowns Connect and disconnect power from machines Minor programming may be required May be required to train on a small number of machine centers Monitor the production board and internal paperwork from supervisor to perform tasks in the designated sequence Enter job data in production tracking system Verify end parts are consistent with blue print specifications Accurately label all parts that require classification for routing to next operation Ensure use of safe work procedures and wear all required PPE Perform work at the appropriate pace to maintain quality and productivity requirement Role qualifications as an Experienced Machinist 2 or 3 : Preferred candidates will have a 2-year technical degree and a minimum of 5 years experience in a related area. (Machinist 2) 6+ years machining on both lathes and mills (Machinist 3) Proficient knowledge in interpreting blueprints and mechanical drawings Proficiency in performing operations using CNC equipment Accurately use tape measure and precision measuring devices Ability to perform basic shop math functions Ability to maintain crane and forklift certifications Ability to solve practical problems and make decisions within a set of guidelines Ability to read and understand required internal manufacturing paperwork Ability to electronically record production information Effective and appropriate oral and written communication skills, including legible handwriting in English Work with others as part of a team Adapt to changing work priorities Able to work under limited supervision using standardized practices and/or procedures Accept and apply on the job training to advance your skill level Join Millerbernd Manufacturing - Where Your Career Can Take Shape About Us: At Millerbernd, we don't just offer jobs-we build careers. We're dedicated to creating meaningful opportunities where you can unlock your potential, turn ideas into action, and be part of a skilled, diverse, and driven team. From day one, you'll experience a supportive and dynamic environment designed to help you grow and succeed. What We Offer: Comprehensive Benefits Medical, Dental & Vision Insurance - Two medical plan options, with company HSA contributions Health & Flexible Spending Accounts (HSA/FSA) - For medical and dependent care expenses Life & Disability Insurance - Company-paid basic life, AD&D, and short-/long-term disability Voluntary Benefits - Including optional life, legal & ID protection, accident & critical illness insurance Financial Security 401(k) with 4% Match - Immediate vesting Incentive Pay - Performance-based bonus programs depending on your role and shift Certain roles are eligible for the Performance-based “Freight Train Profit Sharing (FTPS)” Incentive plans This team incentive plan has a weekly goal and a weekly stretch goal If goals are achieved, the monthly payout can be up to $1,000 per eligible employee Work-Life Balance Accrual Paid Time Off (PTO) and Paid Holidays Tuition Reimbursement - Up to $5,250/year for job-related education Employee Assistance Program (EAP) - Free, confidential support services Onsite Training - Includes leadership, welding, and language courses Uniform Subsidy - For eligible roles Benefits available to employees working 30+ hours/week. 401(k) available to all employees. What to Expect from the Hiring Process Submit Your Application - Our internal Talent Acquisition Team personally reviews every application Phone Interview - If your background aligns with the role, we'll reach out for an introductory call Onsite Interview & Facility Tour - Get a firsthand look at what it's like to work at Millerbernd Follow-Up & Offer - Stay informed throughout the process; most decisions are made within 3-10 business days We're an Equal Opportunity Employer Millerbernd Manufacturing Company is committed to fostering a diverse and inclusive workplace. We encourage individuals of all backgrounds to apply. Applicants must be authorized to work in the U.S. We are unable to sponsor or assume sponsorship of employment visas at this time. Ready to shape your future with us? Apply today and discover what's possible at Millerbernd. #LI-DNI