Computer numerical controller machinist jobs in Towson, MD - 111 jobs

We are seeking a highly skilled Senior CNC Machinist to join our manufacturing team. This role requires extensive hands-on experience operating and setting up 3-Axis CNC milling machines, ideally Haas and Fadal controls. The Senior CNC Machinist will play a key role in producing precision components, supporting process improvements, mentoring junior machinists, and ensuring quality and efficiency on the shop floor. Hours: 1st shift #LATResponsibilities: Set up, operate, and troubleshoot 3-Axis CNC milling machines, preferably Haas and Fadal Read and interpret engineering drawings, blueprints, and GD&T Perform machine setups, including tooling, fixtures, and offsets Edit and optimize CNC programs at the machine (G-code) Monitor machining operations to ensure dimensional accuracy and surface finish Conduct in-process and final inspections using precision measuring instruments (calipers, micrometers, height gauges, indicators, etc.) Identify and resolve machining issues related to tooling, materials, or programs Recommend process improvements to enhance productivity and reduce scrap Maintain machines through routine preventive maintenance and cleanliness Train and mentor junior machinists and operators as needed Adhere to all safety, quality, and company standards Collaborate with engineering, quality, and production teams to meet manufacturing goals $30 - $40 an hour

Job DescriptionSalary: $22/hr - $50.40/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense, and space OEMs, Primes, and Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts machined using standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed Martin, Northrop Grumman) to provide components for mission-critical civilian and defense programs. 1st Shift: M-Th 6am - 4:30pm, base pay 2nd Shift: M-Th 3:30pm - 2:00am, base pay plus 20% shift differential 3rd Shift:F,S,S 6am - 6:30pm, paid full 40hrs for 36hrs worked Machinist I* - $22/hr - $30/hr Machinist II* - $25/hr - $40/hr Setup Machinist* - $28/hr - $42/hr *position level will be assessed through the resume review and interview process. Pay rates are listed at base pay rate* Key Responsibilities Previous CNC Operator experience: mill turn and lathe GD&T print reading Knowledge of calipers, micrometers, metrology. Ability to indicate vices. Coordinate x, y, z Knowledge of machining principles. Operate CNC machines from provided work instructions from work order or set up personnel Verifying dimensional characteristics of parts Meet expected cycle times and production schedule Completion of all required paperwork in a timely manner Requirements Previous CNC Operator experience or technical school course work completed 3 years experience with machine set-ups (for Setup Machinist level) Reading blueprints and using hand tools Prioritizing tasks and maintaining production goals Self-starter with a good attitude Attention to detail and a strong desire to produce quality products Experience in a manufacturing environment utilizing lean manufacturing techniques is preferred Previous experience in Aerospace or defense machining environment preferred. We offer comprehensive benefits for full-time employees including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cr

About Us: BW Papersystems, part of the Barry-Wehmiller Group, builds capital equipment that transforms paper into products for consumers - every day, around the world. We offer innovative technologies, service and parts, and years of global experience in corrugating, finishing; slitting and packaging; stationery; bookbinding and security documents. Customers rely on our machines to produce and convert items such as corrugated boxes, folding cartons, passports, notebooks, copy paper, board, and coated and other specialty papers. For more information, visit bwpapersystems.com. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: BW Papersystems is seeking a CNC Machinist to join our team! BW Papersystems is searching for a CNC Machinist that can perform a range of rough and finish turning, drilling, tapping, boring, facing, recessing, thread cutting and similar machining operations on a variety of shafts, housings heads, and parts of various ferrous and non-ferrous metals and alloys. In this role you will machine parts to specifications using manual and CNC machine tools such as mills, lathes, saws, and grinders. Key Responsibilities: Select the appropriate tools, machines, and materials to be used in preparation of machinery work. Perform a range of rough and finish turning, drilling, tapping, boring, facing, recessing, thread cutting and similar machining operations on a variety of shafts, housings, heads, and parts of various ferrous and non-ferrous metals and alloys. Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines. Use GD&T principles to interpret and analyze blueprints, schematics, and technical drawings to ensure accurate implementation of standard processes. Use mathematical knowledge to calculate location and positioning of features. Edit programs, set up, adjust, and operate basic machine tools, and many specialized or advanced machine tools to perform precision machining operations. Monitor the feed and speed of machines during the machining process and perform quality control checks of critical features. Measure, examine, and test completed units to detect defects and ensure conformance to specifications using precision instruments like micrometers, dial bore gauges, and calipers. Maintain clean and orderly work areas and equipment, report and correct and unsafe work practices or conditions immediately. Perform all work in accordance with established safety procedures. Multi-task various duties throughout the day; maintain a positive attitude with versatility and flexibility. Communicate and interact with various teams and teammates to solve problems independently. Basic Qualifications & Requirements: High School Diploma or GED equivalent 2+ years of experience working in a machine shop environment. The approximate pay range for this position is $23/HR - $30/HR. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. #LI-JK2 At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: BW Papersystems

The CNC Machinist will set-up and operate CNC Mills & Lathes to fabricate metallic and non-metallic parts. Requirements: Setup, and operate various CNC equipment with minimal supervision. Must have Proficient Knowledge of a variety of controls (Mazak, Fanuc, etc) with the ability to perform manual CNC program edits as required to complete job work scope. Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerances per ANSI Y-14.5. Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometers, bore gauges, dial calipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.002” over 55” diameter. Where required, document inspection results on supplied IDS Sheets and/or Inspection Prints. Keep equipment (machine, gauging, tooling, etc) clean and well maintained and maintain a clean and orderly work area. Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment. Document daily activities to assure performance in accordance with job standards. Job Duties: Setup and operate CNC Mills/Lathes - Utilize knowledge of working properties and machining processes for a wide variety of materials such as stainless steel, Monel, Hastalloy, other nickel alloys, cast iron, carbon steel, bronze, aluminum, plastics, etc. Manufacture components within the allotted time estimates provided on job travelers. Ensure customer satisfaction with products and service. Make process recommendations for improved efficiency and works with the CNC Programmer to optimize processes, programs and cutting tools. Additional Qualifications: The following skills and qualifications are a plus but are not required for this position: Mastercam Programming experience Experience working in an ISO-9001 or AS9100 Quality Environment Benefits: Medical / Dental / Vision / Life Insurance Vacation / PTO 10-Paid Holidays 401k with company match Profit Sharing Clean, Climate-Controlled working environment

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! SENIOR CNC MACHINIST Based out of Rocket Lab's Space Structures Complex facility in Middle River, Maryland. The Senior CNC Machinist will maintain, set up and operate the CNC machines to build flight-ready hardware that meet Rocket Lab specification at the needed rate. Space Structures Complex is hiring for multiple shift schedules. WHAT YOU'LL GET TO DO: Work with composites CNC machine cutting carbon, glass, and wood. Machine massive components for our Neutron rocket Read and translate drawings/CAD models Provide feedback to Engineering to improve instructions Work with CNC programmer to maintain tolerances and, do basic programming activities Work to reduce any non-conformances found by quality or engineering. Provide improvement ideas on batch sizes, setups, tool selection etc. Track calibration and maintenance of all equipment and tooling in the area. YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR CNC MACHINIST: HS Diploma and 8+ years of experience with CNC operation on lathe and mills 3+ years experience using a 5 Axis CNC THESE QUALIFICATIONS WOULD BE NICE TO HAVE: CNC programming experience - NX programming Experience in an Aerospace Manufacturing Environment Experience running CMS CNC machines (Poseidon, Ares) Manual Programming (understand and diagnose g-code) ADDITIONAL REQUIREMENTS: Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Must be able to climb ladders and be comfortable working in tight spaces. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, and free snacks/drinks onsite. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (MD Only)$34.62-$43.27 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

OverviewWe are seeking a skilled CNC Machinist to join our dynamic team in York, PA. In this role, you will play a crucial part in our manufacturing process, utilizing your expertise to produce high-quality components with precision and efficiency. If you have a passion for machining and a keen eye for detail, we want to hear from you! ResponsibilitiesSet up and operate CNC machines to produce parts according to specifications.Read and interpret blueprints, technical drawings, and CAD files.Monitor machine operations to ensure quality and consistency of output.Perform routine maintenance and troubleshooting on CNC equipment.Collaborate with team members to optimize production processes and workflows.Maintain a clean and safe work environment in compliance with company policies.Document production data and report any discrepancies or issues to management. QualificationsHigh school diploma or equivalent; technical degree or certification in machining preferred.Proven experience as a CNC Machinist or similar role.Proficient in reading and interpreting technical documents and blueprints.Strong understanding of CNC programming and machine setup.Ability to use precision measuring tools and equipment.Excellent problem-solving skills and attention to detail.Strong communication skills and ability to work collaboratively in a team environment. You should be proficient in: GD&T Equipment Troubleshooting CNC Tooling Troubleshooting Skills CNC Programming G-Code M-Code Machine Setups for Production Runs Machines & technologies you'll use: CNC Mill (3-4 axis VMC) CNC Lathe (2-4 axis) CNC Mill (5+ axis VMC) CNC Lathe (5+ axis)

In this role you will operate, clean, and maintain various machining equipment including lathes, mills, 3-axis machines, 5-axis machines and other equipment to make precise parts, ensure efficient operations, and achieve high utilization. At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout/tagout when necessary. Utilizes work instructions, set-up sheets and method documents to correctly operate machines and inspect machined parts. Reads and interprets all drawings, including geometric dimensioning and tolerancing. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Follows instruction from a traveler/router and machining procedures to perform the machining process. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Ability to read and understand sketches, blueprints and thorough understanding of tools and proper use of fixtures. May set up, or learn to set up, and run CNC or manual machinery. Adjust controls to vary the depth of cut, RPM and rate of feed efficiently. Updates inventory systems for usage and scrap and prepares Material Tags for non-conforming parts. Capable of following detailed manufacturing processes to produce high-tolerance parts. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous experience in machining and with quality processes is desired Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $21.00 -$30.00

Job Description Netzer Metalworks is currently hiring machinists Medical and Dental Benefits, 401k, Paid Holidays Climate controlled facility. 5 years + experience recommended. - Set up and operate various machine tools to produce precision parts - Read and interpret blueprints, sketches, and engineering specifications - Use hand tools, power tools, and measuring instruments to perform machining operations - High school diploma or equivalent - Minimum of 2 years of experience as a machinist in a manufacturing environment - Strong knowledge of machining techniques, tooling, and materials - Ability to lift heavy objects and stand for extended periods of time - Perform other duties as assigned to maintain efficiency throughout the company. - Training available. - Ability to use Standard measuring Equipment i.e. Micrometers, Calipers, Height Gauges Powered by JazzHR 1sSGzI1ToR

Company: Acco Department: Manufacturing Title: CNC Lathe Operator - YORK, PA Reports to: Machine Shop Supervisor Level/Grade: Union Type of Position: Full Time FLSA Status: Non-Exempt Shift: First Company / Product Acco Material Handling Solutions (“Acco”) specializes in the manufacturing of material handling equipment, including hoists, cranes, carts and lifters. Its products are used primarily in industrial manufacturing and distribution environments, including aerospace, water treatment, heavy manufacturing, agriculture, mining, automotive, and logistics. Operating from three manufacturing facilities in the US, Acco provides ready to ship stock products or fully engineered custom devices. Products are sold through distributors, as well as to large direct customers. Job Summary CNC Lathe Operator will setup, machine, and measure parts to close tolerance to support wire rope hoist and component manufacturing. Principal Duties and Responsibilities Work with supervisor on setting daily work flow/priorities Read and interpret drawings Setup, machine, and measure to specification Maintain highest quality standards - accept no defects, make no defects, pass no defects Communicate any challenges related to Safety, Quality, Delivery, Inventory, and Productivity (SQDIP) to supervisor Maintain a clean and organized work space Innovate and collaborate with peers in your work area - find ways to improve SQDIP Volunteer for overtime as needed Pay / Location Starting rate - $21.00 per hour with progression to $23.00 per hour. Pending experience level determines starting hourly rate. Location - 76 Acco Dr York, PA Job Specifications (Work Experience, Skills, Abilities, etc.) Ability to read and interpret machining drawings Experience in CNC Lathe machine setup and operation Manual and NC machine experience a plus Experience with and ability to use calipers, micrometers and other precision measuring tools Coordinate Measuring Machine (CMM) experience a plus High sense of urgency and strong work ethic Demonstrated ability and passion for high quality output Works well both independently and in a team environment Education Requirements: High school diploma or equivalent, technical/vocational school a plus Physical Demands/Environmental Conditions: Typical manufacturing conditions. Must be able to lift 35 - 50 lbs. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. #Acco

Job Description is for experienced Manual Machinist only. Not intended for Machine Operators. As a national leader in providing superior electro-mechanical repairs and services, we are currently seeking a 1st shift Manual Machinist for our machine shop. Since 1981, we have been a family-owned company instrumental in keeping national industries operational. We specialize in building, servicing, and selling industrial motors, controls, gearboxes, and related equipment for advanced electric motor systems. Our Machinists play a crucial role in performing complex machine tool operations to produce, fabricate, and repair precision parts for industrial motors. The position hours are 7:00 AM to 3:30 PM with a 30-minute unpaid lunch break. Responsibilities Set up and operations on engine lathes, vertical/horizontal mills, and vertical lathes Interpret blueprints to determine critical dimensions and machine set up Read micrometers, Vernier calipers, dial indicators and other precision measuring and test equipment as required Maintain low tolerances as indicated by specifications or drawings Determine speeds and feeds to obtain proper surface finish Adhere to all company EH&S and QMS processes Other duties as required, including some disassembly/assembly, repair and rebuilding of industrial equipment Qualifications Required: 3 or more years experience setting up and operating manual lathes and mills Able to read and interpret blueprints and engineering drawings Able to read micrometers, Vernier calipers, dial indicators and other precision measuring and test equipment Able to work overtime; typically throughout the week and occasionally on weekends Preferred: Welding experience including set up welder and perform welding tasks using GMAW, GTAW, SMAW Technical/vocational degree in Machining Good computer skills High School diploma or GED equivalent Motor Technology, Inc. is committed to fostering a supportive, valued, and motivated work environment that encourages teamwork, innovation, personal and professional growth, and work-life balance. Our comprehensive employee benefits package includes: a 401k with a match up to 8% medical, dental, and vision insurance for employees, spouses, and dependents employer-paid short-term disability and life insurance voluntary insurance options at a group rate paid time off seven paid holidays annual performance and salary reviews Motor Technology, Inc. is an equal opportunity employer committed to applying fair practices in all aspects of employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, or any other protected characteristic. Job Posted by ApplicantPro

We are seeking a highly skilled Senior CNC Machinist to join our manufacturing team. This role requires extensive hands-on experience operating and setting up 3-Axis CNC milling machines, ideally Haas and Fadal controls. The Senior CNC Machinist will play a key role in producing precision components, supporting process improvements, mentoring junior machinists, and ensuring quality and efficiency on the shop floor. Hours: 1st shift Responsibilities: Set up, operate, and troubleshoot 3-Axis CNC milling machines, preferably Haas and Fadal Read and interpret engineering drawings, blueprints, and GD&T Perform machine setups, including tooling, fixtures, and offsets Edit and optimize CNC programs at the machine (G-code) Monitor machining operations to ensure dimensional accuracy and surface finish Conduct in-process and final inspections using precision measuring instruments (calipers, micrometers, height gauges, indicators, etc.) Identify and resolve machining issues related to tooling, materials, or programs Recommend process improvements to enhance productivity and reduce scrap Maintain machines through routine preventive maintenance and cleanliness Train and mentor junior machinists and operators as needed Adhere to all safety, quality, and company standards Collaborate with engineering, quality, and production teams to meet manufacturing goals $30 - $40 an hour

Key Responsibilities Set up and operate 4-axis and/or 5-axis CNC milling machines Read and interpret mechanical drawings and specifications Apply GD&T to ensure parts meet tolerance requirements Perform in-process inspections and basic quality checks Maintain a clean and safe work environment Work independently and contribute immediately to production needs

Job DescriptionSalary: $22/hr - $50.40/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense, and space OEMs, Primes, and Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts machined using standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed Martin, Northrop Grumman) to provide components for mission-critical civilian and defense programs. Weekend, nights (F,S,S 6pm - 6:30am), paid 40 hrs for 36 hrs worked Key Responsibilities Knowledge of calipers, micrometers, metrology. Ability to indicate vices. Coordinate x, y, z Knowledge of machining principles. Operate CNC machines from provided work instructions from work order or set up personnel Verifying dimensional characteristics of parts Meet expected cycle times and production schedule Completion of all required paperwork in a timely manner Requirements CNC Operations - Mill turn and Lathe - with on the job training. Reading blueprints and using hand tools Prioritizing tasks and maintaining production goals Self-starter with a good attitude Attention to detail and a strong desire to produce quality products Willing to obtain a Security clearance (Primus will sponsor upon hire) We offer comprehensive benefits for full-time employees including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

In this role you will set up, operate, clean, and maintain various machining equipment including lathes, mills, 3-axis machines, 5-axis machines and other equipment to make precise parts, ensure efficient operations, and achieve high utilization. At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout/tagout when necessary. Studies blueprints, sketches, drawings, manuals, and specifications to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements. Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input or edits computerized machine control media. Selects proper programs, fixtures, tooling, drills, and inserts as needed. Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine or machine's program as required to vary the depth of cut, RPM and rate of feed efficiently. Confers with engineers, supervisor, production personnel, programmers, maintenance, or others to resolve machining or assembly problems. Works with material preparation and finishing departments as needed. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Performs layouts, sets up and operates a variety of machine tools. Follows instruction from a traveler / router and machining procedures to perform the machining process. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Updates inventory systems for usage and scrap and prepares Material Tags for non-conforming parts. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run - must be able to hold very tight tolerances ((+/- 0.0001). Ability to use precision measuring instruments i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. May provide training to others in the department when necessary. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous experience in machining and with quality processes is desired Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $25 -$ 35

Job Description Manual Machinist - 1st Shift Pay: $30-32/hr. Shift: 7am-3pm (Mon-Fri) We are looking for a skilled Manual Engine Lathe Machinist to join our hydraulics manufacturing team. Qualifications & Skills: 3+ years of experience operating manual engine lathes Basic knowledge of machine maintenance and troubleshooting. Ability to lift heavy materials (50 lbs) and stand for long periods. Key Responsibilities: Set up and operate manual engine lathes to fabricate hydraulic components, including shafts, pistons, and cylinder parts. Read and interpret blueprints, engineering drawings, and specifications to determine machining processes. Measure and inspect machined parts using micrometers, calipers, and dial indicators to ensure accuracy and adherence to hydraulic system tolerances. Perform machining operations such as turning, threading, boring, facing, and tapering on hydraulic components. Benefits: Health / Dental / Vision Retirement Plans PTO Paid Holidays Flexible start time

The CNC Machinist is responsible for setting up, operating, and monitoring 4-axis and/or 5-axis CNC milling machines to produce precision components that meet engineering specifications and quality standards. This role requires strong experience in tool identification, presetting, and working with complex multi-axis machining processes in a production or job-shop environment.Responsibilities: Set up and operate 4-axis and/or 5-axis CNC milling machines to manufacture precision parts Identify, select, and install appropriate cutting tools, fixtures, and workholding Perform tool presetting, offsets, and tool length/radius adjustments Load and verify CNC programs; make minor program edits as needed Interpret blueprints, GD&T, work instructions, and CNC setup sheets Conduct in-process inspections using precision measuring instruments Monitor machine performance and adjust feeds, speeds, and offsets to optimize quality and cycle times Troubleshoot machining issues related to tooling, fixtures, materials, or programs Maintain accurate production and inspection documentation Follow all safety, quality, and housekeeping standards Perform routine machine maintenance and keep equipment in good working condition

In this role you will operate, clean, and maintain various machining equipment including lathes, mills, 3-axis machines, 5-axis machines and other equipment to make precise parts, ensure efficient operations, and achieve high utilization. At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. This position is for B shift hours are 3pm- 11pm. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout/tagout when necessary. Utilizes work instructions, set-up sheets and method documents to correctly operate machines and inspect machined parts. Reads and interprets all drawings, including geometric dimensioning and tolerancing. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Follows instruction from a traveler/router and machining procedures to perform the machining process. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Ability to read and understand sketches, blueprints and thorough understanding of tools and proper use of fixtures. May set up, or learn to set up, and run CNC or manual machinery. Adjust controls to vary the depth of cut, RPM and rate of feed efficiently. Updates inventory systems for usage and scrap and prepares Material Tags for non-conforming parts. Capable of following detailed manufacturing processes to produce high-tolerance parts. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous experience in machining and with quality processes is desired Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles Graduate of related two-year vocational school program and three years related work experience and/or training; or equivalent combination of education and experience Eligible to work in the United States without company sponsorship WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $23 -$28 / Per hour

Pay: $30-32/hr. Shift: 7am-3pm (Mon-Fri) We are looking for a skilled Manual Engine Lathe Machinist to join our hydraulics manufacturing team. Qualifications & Skills: 3+ years of experience operating manual engine lathes Basic knowledge of machine maintenance and troubleshooting. Ability to lift heavy materials (50 lbs) and stand for long periods. Key Responsibilities: Set up and operate manual engine lathes to fabricate hydraulic components, including shafts, pistons, and cylinder parts. Read and interpret blueprints, engineering drawings, and specifications to determine machining processes. Measure and inspect machined parts using micrometers, calipers, and dial indicators to ensure accuracy and adherence to hydraulic system tolerances. Perform machining operations such as turning, threading, boring, facing, and tapering on hydraulic components. Benefits: Health / Dental / Vision Retirement Plans PTO Paid Holidays Flexible start time

Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: 5 years experience in machining and with quality processes is desired Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $32 -$42