Electrician jobs in Lubbock, TX

Journeyman Electrician - Houston Metro TVM Replacement Project We are seeking a licensed Journeyman Electrician for a specialized project involving the replacement of Ticket Vending Machines (TVMs) for Houston Metro's INIT system. This position will work directly with Houston Metro personnel to safely disconnect, replace, and reconnect power systems for TVM units throughout the Metro system. Project Details Client: Houston Metro (INIT Project) Start Date: November 2025 (anticipated) Schedule: Monday - Friday, 7:00 AM - 4:30 PM Pay Rate: $32-$35 per hour (based on experience) Note: Selected candidate will be required to complete Metro training through Jimmy prior to project start Essential Duties and Responsibilities Safety & Coordination Coordinate with Houston Metro employees to safely shut off power to TVM units Perform proper lockout/tagout (LOTO) procedures during all work activities Adhere to all Metro safety protocols and requirements Electrical Work Disconnect and reconnect TVM power systems Test and verify power connections after completing TVM changeouts Make power connections in confined spaces within TVM units Extend existing wiring at base of TVMs using bell boxes and blank covers Perform low voltage connections on payment validators (PV) as needed Conduit & Fitting Installation Work with ½" through 1" seal tight conduit and fittings Perform changeovers from rigid conduit to seal tight Downsize seal tight connections using reducing bushings as required Install ¾" through 1" rigid conduit as needed Drill through thick metal using ½" through 1" hole saws Equipment Operation & Documentation Operate pallet jack for material handling Use bandsaw and grinder with proper PPE Document daily material usage and submit reports to Project Manager Required Qualifications Active Texas Journeyman Electrician License (required) Demonstrated experience with conduit installation and electrical connections Ability to work in tight spaces and confined areas Physical ability to lift 50 lbs regularly Strong attention to detail and commitment to safety protocols Equipment & Materials All tools and materials will be provided on ESP box truck Proper PPE required for all tasks To Apply Please submit your resume and current license information. Qualified candidates will be contacted for interviews and Metro training coordination. This position requires successful completion of Houston Metro training prior to project commencement

We put the unity in "opportunity." Opportunity Snapshot: Compensation: $35-45/hour, depending on experience Work Schedule: M-F (10+ hours) Assignment Duration: 6 months+ Benefits: Comprehensive insurance, 401(k), PTO and holidays Responsibilities: Knowledge of and experience working with motor control centers safely and effectively Knowledge of and experience working medium voltage equipment and motors safely and effectively Knowledge of or experience working at compressor stations in electrical construction, maintenance, and repair Process controls and tubing experience is preferred Heat trace installation, repair, and maintenance experience required Knowledge of A/C and D/C circuits, as well as electrical theory, ladder logic, read electrical schematics, electrical devices and apparatuses Knowledge of proper power and control troubleshooting (pump panels, instrument devices, relays, breakers, transformers single and three phase, motors etc.) Knowledge of overhead power line and troubleshooting transformer sizing and wiring, fuse coordination is a plus Knowledge of VFD and Soft start devices, operation, and components is a plus but not a requirement Will have to be available for call out rotations Must has knowledge of meters and how to take measurements safely and correctly Qualifications: Licensed Journeyman Texas and/or New Mexico preferred Candidate needs to have good communication skills verbal and written Must have clean driving record for at least 3 years Must work well with others within his/her department and other departments Must have good work ethics honesty, trustworthy, punctual, integrity etc. Must be self-motivated individual and able to coordinate workflow Individual has to be available for on call rotation once put into rotation and be able to manage tasks and workflow accordingly Individual will need to have a good safety culture and will need to conform to ours and be a safety leader in all aspects of day-to-day work and tasks The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Driven from the bottom up by their innovative and highly engaged employees, our Client takes pride in their collaborative organization where employees continuously learn from one another and are provided with a quality environment in which to work, with a company culture committed to sustainability and corporate responsibility. Based in Houston, Texas, our Client is one of the largest independent (non-integrated) crude oil and natural gas companies in the US.

Barnard Construction Company, Inc., based in Bozeman, Montana, is a heavy-civil construction company with projects underway across North America. Barnard is ranked by Engineering News-Record , a leading construction industry periodical, as one of the nation's Top 400 civil contractors. We specialize in dam construction and rehabilitation, power transmission and distribution, tunneling, inland marine, oil, gas, utility, and sewer and water pipeline projects. We offer competitive wages, 401(k)s, a generous health plan, and challenging career opportunities with a financially solid company. Barnard's people are the reason for the success of the company. Our reputation attracts the highest quality personnel, people who are committed to producing projects that set a standard for excellence. At Barnard, we build the riskiest, most difficult, complex jobs we can find and we hire people who thrive on tough work and demanding opportunities. Qualifications Must possess competence in the following areas in order to perform this role in a safe, productive and effective manner: Interprets drawings, sketches, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations Installs control and distribution apparatus' and fastens in place Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement May be required to pull wire through conduit; connect wiring to fixtures and power equipment Work with medium and low voltage systems Disassembles and repairs defective electrical equipment or systems Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools Responsibilities Must be able to pass a pre-employment drug screen Must be able to pass pre-employment criminal background screen Must possess current State of Texas Journeyman or Master Electrician License Ability to exert heavy physical effort, handling average weight objects up to 25 pounds Ability to kneel, stoop, crouch, balance, climb or crawl Ability to correctly rig and hoist material Ability to tolerate heights without fear Ability to maintain balance Ability to stand or walk for long periods of time, reach for, handle, and manipulate items and to work in extreme weather conditions (cold and wet) Able to work long, irregular and varied hours, 50 to 70 hours per week Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. Ability to safely and effectively perform the essential job functions consistent with the ADA, FMLA and other federal , state and local standards, including meeting qualitative and/or quantitative productivity standards. Equal Opportunity Employer Veterans/Disabled, E-Verify Employer

***This position will be required to work a Rotational schedule which includes days and nights with occasional overtime*** will work in an industrial, non-climate controlled setting. Opportunities: Electrical/Electronic - Performs electric and electronic advanced maintenance inspections, diagnosis and corrective actions, performing systematic analysis of problems and improvement opportunities, in a safe and efficient manner according to applicable procedures and best practices, complying with defined quality standards. Inspects, diagnoses and performs advanced electric and electronic repairs, replacements and upgrades. Follows up repairs ensuring the performed work effectiveness. Inspects electric and electronic equipment according to maintenance plans. Makes complex failure analysis, establishing the problems' root causes and taking actions to avoid repetitions. Performs reviews of emergency groups' repairs and failure analysis. Carries out analysis and proposal of machine and equipment upgrades or replacements. Develops basic PLC programs and software. Interprets electrical drawings. Verifies the correct functioning of tools, instruments and accessories checking they fulfill with specifications. Develops and tests preventive maintenance plans. Plans corrective actions for scheduled or unscheduled shutdowns, based on the inspections performed or the problems diagnosed. Guarantees the availability of resources, ensuring a suitable minimum stock and the definition of the required information on the maintenance systems. Updates information in the maintenance systems and performs maintenance reports. Other duties as required or assigned Strongly Preferred: Experience working in an industrial environment Experience with working on industrial equipment handling voltage up to 480 Experience with PLCs logic (reading & interpreting) LOTO Understands electrical schematics Safety mindset Experience: Manufacturing: 3 years (Preferred) If you are interested in this position and your experience and knowledge match our requirements, please apply, or contact your local HR representative for more information. Thank you for your interest. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Paid time off Parental leave Vision insurance Work Location: In person

We are seeking a skilled and experienced Journeyperson Electrician to join our team. The ideal candidate will have a strong background in electrical systems, with the ability to work independently and as part of a team. This role involves installing, maintaining, and repairing electrical systems in various settings, ensuring compliance with safety standards and regulations. Responsibilities Install, maintain, and repair electrical systems and equipment in residential, commercial, or industrial settings. Read and interpret blueprints, schematics, and technical drawings to determine the layout of electrical systems. Utilize voltmeters, ohmmeters, and other testing devices to troubleshoot electrical issues. Work with power tools and hand tools to complete tasks efficiently and safely. Ensure all work complies with the National Electrical Code (NEC) and other relevant regulations. Collaborate with other tradespeople and contractors to complete projects on time. Perform preventive maintenance on electrical systems to minimize downtime. Document all work performed and maintain accurate records of repairs and installations. Qualifications Completion of an apprenticeship program or equivalent experience as an electrician. Proficiency in blueprint reading and understanding of schematics. Experience working with logic controllers and industrial electrical systems is preferred. Strong problem-solving skills with the ability to troubleshoot complex electrical issues. Familiarity with NEC standards and safety regulations related to electrical work. Ability to work effectively both independently and as part of a team. Excellent communication skills to interact with clients, contractors, and team members. A valid electrician's license is required. Must have journeyman or NCCER licence TWIC card Join our dedicated team where your expertise will contribute to our commitment to quality service and safety in every project we undertake. BE SURE TO APPLY ON OUR WEBSITE: ****************

Meet the team that brings our projects to life. From logistics to electrical work, everyone in the field plays a critical role in building, powering, and delivering success on a jobsite. Our logistics professionals keep construction moving by ensuring a steady flow of inventory. They bring attention to detail and strong organizational skills as they procure tools and materials for our electricians. Apprentice electricians are the powerhouses behind our most dynamic projects, while summer interns and new graduates kick off their careers as industrial electrical professionals. These team members work closely with our journeyman electricians-seasoned experts who lead and mentor crews while completing complex projects. Our journeyman electricians partner with field foremen and site superintendents, who coordinate work, manage risks, and keep projects on track through planning, motivation, and communication. Our I&E, service, and maintenance teams ensure project performance by installing, testing, troubleshooting, and calibrating equipment. Across roles, we all champion safety-empowering employees to lead as safety shareholders, uphold zero-injury expectations, and care for our crews, company, and families. Apprentice Electrician Responsibilities * Measure, cut, and bend conduit using a tape measure and appropriate power/hand tools * Operate power tools such as drills, saws, pullers, tuggers, etc. * Install conductors in race way and cable tray using manual and power equipment * Assist in lifting, positioning, and fastening objects, such as wiring, conduit, and motors * Perform minor repairs, such as replacing fuses, light sockets, bulbs, and switches * Disassemble defective electrical equipment, such as motors, using appropriate power/hand tools * Load, transport, unload, and furnish Journeyman and Foreman Electricians with materials, equipment, tools, and supplies * Use ladders, scaffolding, scissor and boom lifts * Perform housekeeping duties, as required * Other duties as assigned by field leaders Qualifications Education & Experience: We are looking for candidates interested in becoming licensed through our DOL approved Electrical Apprenticeship Program. Candidates with a certificate or AS degree in electrical technology, electrical construction, instrumentation or similar or equivalent experience preferred. Location/Travel: This position will require travel in/around Lubbock, TX - up to/within a 200-mile radius. Applicants must be permanently located in/around the office location or be willing to permanently relocate. Applicants must have reliable transportation and a valid driver's license. Per diem and mileage stipends applicable per company policy. Work Schedule: Start times, break times and work hours vary per site and stage of our projects. Our employees work more than 40 hours per week but no more than 60, as part of our commitment to safety. Due to the type of construction, weekend work maybe required on occasion. Work Environment: While performing the duties of this job, this role is often exposed to high/precarious places, risk of electrical shock, and all outside weather conditions. This role is expected to climb and work at heights and in confined spaces. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base, this role may involve tasks in an environment exposed to dust. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being. Benefits of Working at Interstates: * 401(k) Retirement Plan + Company Match * Health, Dental, and Vision Insurance Benefits (Short & Long-Term Disability, Group Life Insurance, and more) * Company Discount Perk Program (Access to discounts with renown brands across the country) * Paid Time Off & Holiday Pay, Flexible Schedule (Support work/life balance) * Bonus Incentives (End of Fiscal Year Incentives and Merit Increases) * Per Diem/Travel Pay or FAVR Program Benefits (as applicable) * Family & safety culture - a team that cares about you as a whole person, not just what you do at work * Company Sponsored Holiday Events, Team Celebrations, and Community Outreach Volunteer Time * Advancement Opportunities unique to our employee's long-term goals * Company Issued Cordless Milwaukee Tool Kit * Continuing Education & Journeyman Licensing Renewal Assistance * Double Pay for Sunday Work, Triple Pay if working an occasional holiday

The Substation Apprentice supports journeyman electricians in the planning, layout, installation, testing, and repair of substation construction projects. This position is hands-on and labor-intensive, requiring the use of various hand and power tools and working in diverse outdoor environments. Substation Apprentices are expected to uphold the highest safety standards while learning critical skills to support their development in the electrical utility trade. To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Essential Functions: Assist with installation of electrical conduit, duct banks, switches, relays, and circuit-breaker panels. Hand dig ditches and holes as required for substation grounding and foundations. Use hand tools (e.g., drill, screwdriver) and power tools (e.g., conduit bender, threader) effectively and safely. Pull wire through conduit and assist with continuity testing using instruments like ohmmeters and oscilloscopes. Help rig and set large high voltage equipment and install wire jumpers and protective grounds. Operate machinery such as excavators and man lifts in energized substations (if certified). Maintain a clean and safe job site in accordance with safety and environmental regulations. Follow lockout/tagout procedures and participate in job hazard analyses and daily safety meetings. Communicate clearly with team members and other crafts to coordinate tasks and avoid safety risks. Accurately perform basic math operations (add, subtract, multiply, divide whole numbers and fractions). Participate in job-specific training and take initiative in learning layout, reading prints, and identifying hazards. Report any unsafe conditions, near misses, or incidents immediately to supervision. Comply with company Code of Conduct, safety policies, and jobsite expectations. Position Qualifications: High School Diploma or GED. Valid Class A CDL preferred but not required. Must be able to obtain Class A CDL License within 6 months of hire. Must pass a background check, MVR check, pre-employment drug screen, and physical examination. Experience & Skills: No Experience required. Ability to work effectively in a team environment and maintain a positive attitude, even in high-pressure situations. Strong communication skills and the ability to follow instructions. Willingness to learn and adapt to different tasks, equipment, and safety procedures. Basic knowledge of electrical systems and linework materials is an advantage. Must successfully complete pre-employment screening: background check, drug test, MVR (as applicable). Physical Requirements: N (Not Applicable) Activity is not applicable to this position. O (Occasionally) Position requires this activity up to 33% of the time F (Frequently) Position requires this activity from 33% - 66% of the time C (Constantly) Position requires this activity more than 66% of the time Activity Frequency Stand Constant (C) Walk Constant (C) Sit Occasionally (O) Kneel/Squat Frequently (F) Grasp Frequently (F) Climb Stairs Occasionally (O) Work Environment: This job operates in an outdoor field setting. Exposer to extreme weather may be applicable. The company has reviewed this to ensure that essential functions have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by management. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate.

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. This is considered to be a safety sensitive position. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

Lone Star Corporation is searching for an Apprentice to assist install, repair and maintain electrical and auxiliary equipment. Looking for a full time candidate with strong worth ethic that takes pride in their work so that can ensure quality work is completed in a safe and timely manner. Daily Activities Assist the electrician in the various aspects of electrical maintenance, repair and construction. Prepare and assemble various apparatus required for particular work being performed. Keep work areas clean and organized. Pickup scrap wire, boxes, and other discarded materials. Assist with cleaning protective equipment (hot sticks and rubber goods). Use of various hand and power tools. Assist with loading of various materials onto trucks and/or trailers. Must be knowledgeable with the materials needed and process to strip and terminate cables. Ability to perform duties involving prolonged standing, sitting, crouching and/or stooping. Ability to push, pull, and position tools, equipment, and structural material weighing in excess of 100 pounds. Ability to accurately read and record meter data. Comply to all company policies and procedures Any other duties as assigned Position Requirements Must have 2 years of electrical experience Must have valid drivers license Must be able to pass drug test Open availability and must be willing to travel as work is subject to stand-by, pre-arranged and/or call-out duty High School Diploma/GED Benefits Benefits include medical, vision and dental insurance, 401K retirement savings plan, company paid life insurance and paid time off. Our company maintains a strong policy of equal employment opportunity for all associates. We hire, train, promote and compensate associates on the basis of personal and professional competence and potential for advancement without regard for race, color, religion, sex, national origin, age, marital status, disability or citizenship, as well as other classifications protected by applicable federal, state or local laws. About Lone Star Corporation Lone Star prides itself on the reputation that it has built providing instrumentation and electrical installation and maintenance for a wide variety of heavy industrial markets. Our 100% commitment to customer satisfaction ensures that our clients have a competitive advantage on all of their electrical projects. Our goal is to improve value without sacrificing quality, reliability or excellent service. Quality work demands quality people so apply today!

Job Title: Electrician (Helper / Mechanic / Journeyman / Lead Foreman) Safenest Repairs** is hiring skilled Electricians across all experience levels to support a range of electrical installation, maintenance, and troubleshooting projects. We offer a 3-day performance guarantee and a clear path to full-time employment after 12 weeks (520 hours). Competitive billing structure with a 45% markup applies.Key Responsibilities: Electrician Helper Utilize basic hand tools Organize and handle materials Assist in pulling wire Perform mounting and strapping Help with underground rough-in work Maintain a safety-conscious work environment Mechanic Perform pipe bending and conduit installation Install trim-outs and fixture connections Conduct wire pulling and rough-in tasks Terminate junction boxes and control panels Interpret basic blueprints and sketches Size conduit and boxes Install transformers and branch circuits Journeyman Size wire and conduit accurately Install switchgear, feeders, and motor controls Handle advanced layout and system prep Troubleshoot controls and circuits Read and interpret complex blueprints Apply electrical theory knowledge Perform rigging and equipment installation Lead / Foreman Lead and manage a crew Direct and plan project work Order and track materials Install and troubleshoot all electrical systems Monitor job progress and quality Ensure compliance with codes and regulations License Requirements 1. Journeyman 2. Tradesman Electrician ( Work Registration) Job Type: Full-time (eligible for permanent hire after 520 hours) Incentives: Quickly payments and Overtime allowances Full-Time Hire After 12 Weeks (520 hours) Bill Rates: 45% markup

Performs skilled electrical/instrumentation installation, maintenance, troubleshooting, and repair work related to specialized electrical equipment up to 15kv and instrumentation equipment used to operate and monitor the City's water and wastewater systems. * Install, maintain, and repair pumping panels, MCC switchgear, low and medium voltage motor controllers, circuit breakers, transformers, variable frequency drives, level transmitters, flow meters, data radios, generators, electric valve actuators, cathodic protection controls, and power monitoring equipment; * Install, maintain, and repair building and pole lighting systems, conduits, lighting panels, uninterruptible power systems, HVAC control systems;Identify and diagnose overhead electrical power distribution system failures, replace blown pole fuses, connect single phase and three phase electrical services. Also install, repair, or replace electric service risers including kilowatt hour meter bases; * Perform system design, installation, remote programming and diagnostics, and repairs, for computer controlled automation systems, electrical controls, multi-platform programmable logic controllers (PLC), and human machine interface (HMI) systems; * Maintain, perform system diagnostics, and repair supervisory control and data acquisition (SCADA) systems, remote terminal unit (RTU) data communication systems, and fiber optic interface components; * Perform inspections, installation, calibration, and certification of water quality monitoring instrumentation for compliance with the Texas Commission on Environmental Quality (TCEQ), as well as process control instrumentation such as flow, level, pressure, loss of head, and air metering devices; * Interpretation and understanding electrical and electronic system designs, plans, specifications, multi-page wiring schematics, and basic one-line diagrams. Assisting in the startup, commissioning, and troubleshooting of process control systems including correcting problems with communications, field process variables, or design engineering; * Serves as a designated "on call" technician on a weekly rotational basis to perform emergency equipment repairs on a 24/7 schedule. Incumbent may be required to perform work on weekends and holidays; * Train and supervise apprentices; * Perform assigned duties, as required. Completion of a high school diploma or the equivalent with an additional four years electrical installation and repair experience under the supervision of a Master Electrician, or any combination of training, education, and experience equivalent to a four-year electrical apprenticeship; Licenses/Certifications: * Valid current Class C Texas driver's license; * Journeyman Electrician license as issued by the Texas Department of Licensing and Regulation; * Class C Surface Water license issued by TCEQ or ability to achieve Class D Water license after one year of employment and then ability to achieve Class C Surface Water license within two years afterwards for assignment in the Water division; OR * Class C Wastewater Operator license issued by TCEQ or ability to achieve Class D Wastewater license after one year of employment and then ability to achieve Class C Wastewater Operator license within two years afterwards for assignment in the Water division. * Critical Infrastructure: This position has been determined to have close contact with, or control of Critical Infrastructure components. This position is subject to extensive background checks and random drug screening. * KNOWLEDGE AND ABILITIES: * Principles and techniques of electrical installation, maintenance, and repair; * Perform repairs, calibration, and inspections on electrical/instrumentation equipment; * Operate analog and digital meter electrical testing equipment, two-way radio, telephone, computer, hotstick, soldering iron, saws, drills, hand tools, compression crimpers, and air compressors; * Ability to make safe decisions in an emergency situation in the absence of the Industrial Electrical Foreman; * Use appropriate safety equipment and follow safety rules accordance with Occupational Safety and Health Administration (OSHA) and National Fire Protection Association (NFPA) 70E; * Work in confined spaces using the proper safety equipment, including self-contained breathing apparatus; * Read and interpret schematics and electrical wiring diagrams; * Maintain accurate records of work performed; * Communicate effectively with others. PHYSICAL REQUIREMENTS: * Frequently lift and carry up to 25 pounds; * Occasionally lift and carry up to 75 pounds; * Continuously stand during the shift; * Occasionally climb ladders, stairs or inclined surfaces; * Occasionally bend and kneel during a shift; * Push and pull objects; * Occasionally flex upper trunk forward at the waist and partially flex at the knees; * Frequently rotate upper trunk to the right or left while sitting or standing; * Place arms at shoulder height while working.

Job Description If you're the type who likes working outside, solving problems with your hands, climbing to new heights (literally), and seeing the results of your work light up a skyline... we've got a hard hat with your name on it. At SkyRite, we don't just install signs. We finish what others start. Our signs are commitments, symbols of our customers' identity, and they only shine because of the skilled electricians and installers who bring them to life. That's you. This role is full-time and hourly, with steady overtime opportunities. Thanks to the Big Beautiful Bill, overtime pay is now tax-free...more of what you earn stays in your pocket. This is hands-on, physical work. You'll be outdoors on lifts, rooftops, and ladders. You'll wire up illuminated signs, troubleshoot outages, bring failing systems back to life, and make sure every project meets code. Every day is different. Every job matters. And your work literally shapes the skyline. SkyRite currently has positions available for Journeyman or Master Sign Electrician in the following areas: Amarillo, TX Lubbock, TX What You'll Actually Do Install and service illuminated and non-illuminated signs and lighting systems Read and interpret drawings, specs, and NEC codes to get it right the first time Wire, connect, and troubleshoot electrical systems safely and efficiently Operate sign trucks, cranes, and lifts to get the job done Load your truck with tools, materials, and equipment to minimize return trips Document your work, take photos, and complete checklists for quality control Communicate clearly with your crew, the office, and the customer Why This Isn't a Dead-End Job We're not looking for someone who just wants to punch a clock. We're building the next generation of leaders in the sign industry. Journeyman and Master Sign Electricians are the backbone of what we do, and we'll invest in your growth...whether that's bigger pay, more complex projects, or leadership opportunities. If you're relocating from another state and can prove at least 8,000 hours of documented sign installation or service experience, we'll help you test for your Texas license and support your move here. You'll Love This Job If You... Take pride in work that thousands of people see every day Enjoy solving problems and fixing things that others can't Like physical work that keeps you moving and outdoors Want stability, steady hours, and overtime that actually pays off Appreciate a team that looks out for each other and gets it done Enjoy the benefits of a low cost of living and no state income tax What You'll Get in Return $3,000 sign-on bonus (split depending on testing/licensing status Relocation package available for the right candidate Extremely competitive hourly pay (based on experience) Overtime pay that's now tax-free under federal law We offer additional stipend compensation for having and maintaining a commercial driver's license (CDL) in good standing. Medical, dental, and vision insurance with multiple plan options Company-paid life insurance ($25,000) Company-paid long-term disability coverage Optional FSA, HSA (if eligible), short-term disability, critical care, supplemental life insurance, and even pet insurance Two weeks of paid time off per year (accrues and grows with tenure) Eight paid holidays per year Cell phone reimbursement Relocation package available for the right candidate A clear path to grow your career in a skilled trade and into leadership Minimum Requirements Active Journeyman or Master Sign Electrician license in Texas OR 8,000+ hours of verifiable sign installation/service work in another state (eligible to test in Texas immediately) Reliable work ethic and safety-first mindset Comfortable with heights, ladders, and physical labor Ability to read and follow plans, specs, and codes Some MIG welding and crane/lift experience preferred If you're ready to take your career to the next level, make more money, and be part of something big... we're ready for you. Apply Today ************************************* SkyRite is an equal opportunity employer. Keywords: Entry level, Sign Installation, Sign Technician, Journeyman, Master, Electrician, Installation, Heights, Blue Collar, Outdoor Elements, Apprentice, Commercial lighting, Pole Lights, Building Lights, Neon, Fluorescent, CDL.

Looking for an electric lineman to complete installation and repairs of overhead and underground power lines, poles, transformers and related equipment. Key Responsibilities Installation & Maintenance: Stringing cables, setting poles, installing transformers, meters, and other electrical apparatus. Repair & Troubleshooting: Identifying and fixing faults, responding to outages, and replacing defective equipment like insulators, fuses, and switches. Safety & Inspection: Testing lines, clearing hazards (like trees), and strictly following safety procedures for energized and de-energized lines. Equipment Operation: Operating bucket trucks, cranes, trenchers, and other heavy machinery. Documentation: Reporting progress, issues, and material needs to supervisors. Essential Skills & Qualifications Technical Knowledge: Understanding of electrical theory, power distribution systems, and electrical safety. Physical Stamina: Strength, balance, and ability to work at heights and in various weather conditions. Problem-Solving: Strong analytical and troubleshooting skills to diagnose complex issues. Certifications: Completion of an apprenticeship program is typically required. License: May require a Commercial Driver's License (CDL). Work Environment Outdoors, at significant heights (poles, towers) or in confined spaces. All weather conditions, including extreme heat, cold, and storms.

Yellowstone Local is proud to represent The Perfect Light, an industry leader in outdoor lighting and now expanding into residential electrical services. You're not just an electrician, you're a pro who wants more. More respect. More responsibility. More opportunity. If you're ready to help launch a brand-new division with a company trusted by tens of thousands of Texans, The Perfect Light wants you. What's in it for You? Competitive pay of $70,000 - $110,000, inclusive of bonuses and commissions Consistent year-round work with growth into new markets (starting in Houston, then Dallas) Full-time schedule with opportunities for overtime Yearly wage increases tied to skill development Company truck (your mobile billboard), stocked and ready An iPad with high-end software will be provided Paid training and hands-on development Career advancement opportunities as we build this new division Ongoing training, including Journeyman exam preparation Work with a passionate, customer-first team in a growing and stable company Why You'll Love It Here Be part of something new: You'll be a foundational hire in a growing electrical division Loyal customer base: 10,000+ homeowners already trust us with lighting; now we're expanding your services to them Respect the trade: We don't cut corners, we invest in tools, training, and YOU Team-first culture with strong leadership, clear goals, and no micromanaging A mission-driven company that creates joy for customers all year long Your New Role Based in Houston, TX, you'll work directly with homeowners, performing service calls, installations, and diagnostics. This includes identifying electrical issues, providing safe and effective solutions, educating customers, and ensuring all work meets code. You'll work closely with other teams and help support the expansion of our new Electrical Division across Texas. What You'll Do: A day and week in the life Deliver high-quality residential electrical service: Diagnose, repair, and install electrical systems, including panels, circuits, wiring, outlets, lighting, breakers, and related components, ensuring all work meets code and safety standards. Lead customer education and service options: Explain findings, present repair or upgrade options, and ensure customers fully understand the work being performed to support informed and confident decisions. Execute efficient troubleshooting and diagnostics: Identify root causes of electrical issues, document findings, and recommend long-term, safe, and cost-effective solutions. Maintain professional field operations: Uphold a clean, organized truck and jobsite; complete paperwork and invoices accurately; and use company-provided technology (iPad, software, etc.) to support timely, clear reporting. Adhere to safety practices and compliance requirements: Follow NEC, local code, and company safety protocols; ensure proper PPE usage; and support a culture focused on protecting people, property, and equipment. Support division growth and cross-team collaboration: Coordinate with the lighting and sales teams on customer needs, support follow-up inspections, and contribute to a high-trust culture as the division expands into new markets. Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. High school diploma or GED Minimum 2 years of experience in the electrical trade (Apprentices are welcome to apply) Must have at least a Wireman license; Journeyman license preferred ServiceTitan experience is a plus Valid driver's license and clean driving record Strong customer communication and sales-minded approach Familiar with residential electrical code, safety practices, and troubleshooting Ability to lift 50 - 75 lbs, climb ladders, and work in crawl spaces or tight areas Must be a self-starter with flexibility in hours and schedule Comfortable using power tools and electrical diagnostic equipment Able to pass a drug test The Perfect Light is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

Overview COMPANY OVERVIEW MasTec's Clean Energy and Infrastructure Group (CE&I) is a $4 billion annual revenue business unit that provides construction services for industrial facilities; building products manufacturers, power generation facilities, manufacturing plants; solar, wind, and thermal energy plants; buildings, and infrastructure. Within the CE&I group, the MasTec Industrial sector includes sister companies Casey Industrial and Phoenix Industrial. This collective industrial group provides a merit shop, multi-craft industrial contractor with the ability to self-perform all major craft trades that ensures greater safety, quality, flexibility, and economy in delivering the work required to complete each project. The collective experience and knowledge of this team provides comprehensive project development, pre-construction planning, and project management with the mastery to successfully manage projects that meet deliverable and budgetary requirements. With every project, we commit to providing the highest levels of quality, safety, and value. At MasTec Industrial, we are committed to attracting, developing and retaining the best talent. No matter your role, you will have the opportunity to contribute to our success as we deliver innovative solutions to our clients. Responsible for installing, maintaining, and repairing electrical wiring, equipment, fixtures and ensuring that work is in accordance with relevant codes. Responsibilities ESSENTIAL JOB FUNCTIONS: Promote and comply with all Company and safety policies and procedures Ensure the proper functioning of all electrical units in the facility Ensure scheduled checks for spotting any malfunctions Comply with all safety norms and regulations of working Appropriate use and handling of electrical testing and repair equipment Completion of all tasks as assigned by the supervising manager Maintain records of all electrical inventories and place orders for spare parts and equipment Maintain a log of electrical repair and maintenance works Maintain a professional appearance Other duties as assigned Qualifications EDUCATION AND WORK EXPERIENCE REQUIREMENTS: 4 years related experience and/or training or equivalent combination of education and experience NCCER Certification/License (preferred) KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: Be knowledgeable of MIC Health and Safety programs and project specific regulations. When on-site, actively participate in daily toolbox meetings with crews and subcontractors. Set a personal example of safe behavior. Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals Add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume Common sense understanding to carry out instructions furnished in written or oral form Ability to work within precise standards of accuracy and follow set procedures and standards Other may duties may be assigned PHYSICAL DEMANDS: Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions. May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks. Stamina to perform this task repetitively and continuously for several hour intervals. Uncontrolled environmental conditions: Constant change in weather and site conditions. This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.). Move in and around confined, cluttered, and uneven areas. May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights. Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings. Visualize objects in three dimensions from drawings. Keep good balance and work at heights. See well (either naturally or with correction). Hear well (either naturally or with correction.) Coordinate the use of eyes, hands, and feet. HOURS: This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to projects requirements. TRAVEL: Travel required up to 90%. Position requires presence directly on the Project Site location with intermittent travel to residence of record. What's in it for you: Financial Wellbeing Compensation $37 / hour, commensurate with experience Competitive pay with ongoing performance review and merit increase 401(k) with company match & Employee Stock Purchase Plan (ESPP) Flexible spending account (Healthcare & Dependent care) Health & Wellness Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Employee Assistance Program Planning for the Unexpected Short and long-term disability, life insurance, and accidental death & dismemberment Voluntary life insurance, accident, critical illness, hospital indemnity coverage Emergency Travel Assistance Program Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact *********************. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ***************************** MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. EDUCATION AND WORK EXPERIENCE REQUIREMENTS: 4 years related experience and/or training or equivalent combination of education and experience NCCER Certification/License (preferred) KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: Be knowledgeable of MIC Health and Safety programs and project specific regulations. When on-site, actively participate in daily toolbox meetings with crews and subcontractors. Set a personal example of safe behavior. Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals Add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume Common sense understanding to carry out instructions furnished in written or oral form Ability to work within precise standards of accuracy and follow set procedures and standards Other may duties may be assigned PHYSICAL DEMANDS: Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions. May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks. Stamina to perform this task repetitively and continuously for several hour intervals. Uncontrolled environmental conditions: Constant change in weather and site conditions. This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.). Move in and around confined, cluttered, and uneven areas. May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights. Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings. Visualize objects in three dimensions from drawings. Keep good balance and work at heights. See well (either naturally or with correction). Hear well (either naturally or with correction.) Coordinate the use of eyes, hands, and feet. HOURS: This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to projects requirements. TRAVEL: Travel required up to 90%. Position requires presence directly on the Project Site location with intermittent travel to residence of record. What's in it for you: Financial Wellbeing Compensation $37 / hour, commensurate with experience Competitive pay with ongoing performance review and merit increase 401(k) with company match & Employee Stock Purchase Plan (ESPP) Flexible spending account (Healthcare & Dependent care) Health & Wellness Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Employee Assistance Program Planning for the Unexpected Short and long-term disability, life insurance, and accidental death & dismemberment Voluntary life insurance, accident, critical illness, hospital indemnity coverage Emergency Travel Assistance Program Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact *********************. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ***************************** MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. ESSENTIAL JOB FUNCTIONS: Promote and comply with all Company and safety policies and procedures Ensure the proper functioning of all electrical units in the facility Ensure scheduled checks for spotting any malfunctions Comply with all safety norms and regulations of working Appropriate use and handling of electrical testing and repair equipment Completion of all tasks as assigned by the supervising manager Maintain records of all electrical inventories and place orders for spare parts and equipment Maintain a log of electrical repair and maintenance works Maintain a professional appearance Other duties as assigned

SUMMARY Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. RESPONSIBILITIES - Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints insuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. - Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. - Pulls wiring through conduit, assisted by helper. - Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. - Connects wiring to lighting fixtures and power equipment using hand tools. - Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools. - Connects power cables to equipment and installs grounding leads. - Test continuity of circuit to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. - Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. - Disassembles and repairs defective electrical equipment or systems. - Load, transport and unload material, tools, equipment and supplies. - Maintains tools and equipment. - Be able to distinguish colors. - Knowledge of certain procedures such as LOTO, etc. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

High school diploma as well as the successful completion of a four-year apprenticeship is required to become a lineman. Possess excellent problem-solving, troubleshooting and organizational, and analytical skills. Must have a valid CDL license Responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment. This includes work from power plants to the meters of customers homes. Additionally, a lineman digs trenches for the installation of underground lines, install meters, climb poles to repair overhead lines and inspect power lines for possible repair or replacement.

PLEASE UPLOAD HS DIPLOMA/GED, RESUME AND TEXAS DRIVER LICENSE REQUIRED: * High School Diploma or General Equivalency Diploma (GED) required in English. * Over three (3) years of related experience. A considerable knowledge of the specialized field of electrical repairs and electrical codes. * A valid Texas Driver's License and an acceptable driving record. PREFERRED: Journeyman's license. DUTIES AND RESPONSIBILITIES Plans new or modified installations to minimize waste of materials; provides access for future maintenance, and avoids unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes. Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Measures, cuts, bends, threads, assembles, and installs electrical conduit; pulls wiring through conduit. Splices wires by stripping insulation from terminal leads, twisting or soldering wires together and applying tape or terminal caps. Connects wiring to lighting fixtures and power equipment. Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels. Connects power cables to equipment, such as electric range or motor, and installs grounding leads. Tests continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter, battery, and buzzer, and oscilloscope. Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement. Replaces ballasts, switches, outlets, fuses, circuit breakers, defective wiring, kiln elements, stove controls, motors, controls, thermostats, etc. Repairs faulty equipment or systems. Cuts and welds steel structural members. Drives District vehicles to and from work sites; obeys all traffic laws. Strives to promote the safety, health and comfort of students and employees in the performance of duties. Follows established safety procedures and techniques to perform job duties. Maintains confidentiality at all times. Maintains a high level of ethical behavior as is expected of all District employees. Maintains professional growth by attending in-service and meeting as requested/required. Performs any other duties as assigned by the Supervisor/Director.

**Requisition ID: 177444** Plan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards. **Experience Level** Skilled **Primary Responsibilities and Duties** - Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems - Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations - Installs control and distribution apparatus' and fastens in place - Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components - Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement - May be required to pull wire through conduit; connect wiring to lighting fixtures and power equipment - Work with high and low voltage systems - Disassembles and repairs defective electrical equipment or systems - Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools - Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity. - Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed. **Qualifications** - May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. - Must possess strong working knowledge skills and abilities for position. - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. - Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools **Requirements** - The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl - Constantly works in a construction environment and will be exposed to changing outdoor weather conditions - Work irregular hours, weekends, overtime and holidays as required - May be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffolds - Move and work in and around confined and cluttered places, and uneven surfaces - Must be able to complete tasks in a noisy and dusty environment - May be required/able to move items weighing up to 50 pounds across construction/industrial site - Must have required tools - Licenses (List Requirements) - Observe and comply with all safety and project rules, perform other duties as required - Ability to pass pre-access drug and alcohol testing and fit for duty medical Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit_Craft