Engineering internship jobs in Seymour, IN

Mechanical Engineering Co-op/Intern - Summer 2026 This reflects potential openings for the Summer 2026 Co-op/Internship Session (May-August). This is a general job description and represents multiple openings in various departments. Honda offers both single and multi-semester co-ops and internships. College students must apply to the requisition pertaining to their major and semester of interest. Please note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. More about the Mechanical Engineering Co-op/ Intern at Honda The below descriptions reflect potential environments and duties within our various Mechanical Engineering Co-op/ Intern positions that we offer. Work environments and projects may include but are not limited to: Manufacturing: * Focus on equipment, process, quality and new model activities related to the department of placement (i.e Assembly department, Weld department, Paint department, Stamping department, Casting and Machining department, etc) * Project management * Problem analysis * Investigating new technologies and implementing countermeasure Quality: * Learning and performing vehicle testing * Conducting tests for chassis, brakes, controls, bonnet, trunk and/ or door systems * Testing procedures and fixtures * New model development, drawing, layouts and design change requests * Investigating and providing countermeasures for mass production design related issues * Warranty data trend analysis * Re-creating problem failures to determine root cause, develop countermeasures and perform confirmation testing Purchasing: * Assessing supplier process capabilities * Problem reporting and analysis. * Implementing countermeasures * Verifying and judging effectiveness * Investigating suspect part issues and approving part changes * Approving and verifying supplier countermeasures * Issuing trouble reports * Various daily tasks such as attending meetings, working on assigned project activities, problem analysis, writing technical reports, troubleshooting manufacturing or quality problems and communicating to internal/ external customers Facilities: * Updating and documenting Computer-Aided Design (CAD) drawings of existing infrastructure * Analyzing and designing existing sanitation, Heating, Ventilation, and Air Conditioning (HVAC) and building pressure systems * Developing short and long-term solutions to problems found * Designing modifications of existing facilities infrastructures * Updating mechanical engineering specifications and standards * Reviewing electrical drawings * Learning and understanding plant power infrastructure * Verifying electrical panel schedules * Updating highbay light location Tooling Equipment: * Designing manufacturing equipment and tooling in 2D and 3D Computer-Aided Design (CAD) systems * Determining equipment electrical hardware, software (Programmable Logic Controller (PLC), Human-Machine Interface (HMI), etc.), safety requirements and appropriate design * Managing a schedule and tracking daily processes * Investigating and troubleshooting problems during installation and manufacturing Research and Design: * Supporting the development of vehicle testing and countermeasure analysis (assisting with problem and data analysis, countermeasures, test set-up, data acquisition, test monitoring, recording activities, performance testing and reporting results) * Assisting design engineers in developing/ designing of future models and supporting the creation of drawings * Computer-Aided Design (CAD) Design * Cost and weight calculations * Attending meetings and working with various design/ test groups, suppliers, manufacturing groups, etc. What you need to be successful in this role Required: * Legally authorized to work in the U.S. without sponsorship * General Engineering Coursework * Minimum 2.5 Cumulative GPA or higher (You will be required to provide your current transcript) * Class status- Sophomore (by credit hour) or above * Availability to work a minimum of 10 weeks at 40 hours per week. * Enrollment in a bachelor's or master's degree program studying Mechanical Engineering or related field. * Valid U.S. Driver's License (exceptions considered on a case-by-case basis) * Ability to provide own transportation to and from work each day. Desired: Auto Computer Aided Design (AutoCAD), Computer-Aided Three-Dimensional Interactive Application (CATIA), Manufacturing related coursewor Position Locations Mechanical Engineering Co-op/Intern positions are offered in the cities/ states listed below, if you are selected to move forward in the process, you will be given the opportunity to make selections on your location preferences: * Anna, Ohio (45 minutes north of Dayton, Ohio) * Marysville, Ohio (45 minutes northwest of Columbus, Ohio) * Raymond, Ohio (45 minutes northwest of Columbus, Ohio) * East Liberty, Ohio (55 minutes northwest of Columbus, Ohio) * Russells Point, Ohio (30 minutes northwest of Marysville, Ohio) * Greensburg, Indiana (55 minutes southeast of Indianapolis, Indiana and 60 minutes northwest of Cincinnati, Ohio) * Lincoln, Alabama (45 minutes northeast of Birmingham, Alabama) * Timmonsville, South Carolina (20 minutes southwest of Florence, South Carolina) * Swepsonville, North Carolina (15 minutes SE of Burlington, North Carolina) Honda Co-operative and Learning Internships Program Benefits Housing Accommodations: Honda offers housing at a shared cost, or a housing stipend based on location for our Co-ops and Interns. It is not required to opt-in to but is available should you need housing at the time of your Co-op/ Internship with Honda. Honda Business Resource Groups: One of the ways Honda gives diversity a voice is through its business resource groups. The associate-led, company-supported groups have members aligned across different dimensions of diversity such as gender, ethnicity, ability, life stage and experiences. The groups provide networking opportunities, a chance to give back and professional development. Some groups have even given feedback on Honda products, making them more appealing to all. Embracing all views is what will drive us into the future. Honda wants passionate, driven people to be a part of that future. Performance Feedback: Honda Co-ops and Interns will have the opportunity to receive informal and formal feedback from their leaders, ask questions and express future interest in a scheduled mid-term and final evaluation. Mentorship: Each Co-op/ Intern is assigned a mentor in your department to help you navigate your time at Honda. On-site Wellness Center: Co-ops and Interns have access to join our Wellness Centers (varies by location). Our Wellness Centers are full gyms equipped with cardio machines, weights, basketball courts, pools, dieticians, personal trainers and group fitness classes. Paid overtime: Co-ops and Interns will receive 1.5 times their hourly rate of pay for any overtime worked. Hourly Wage Range: $27.22-$35.22 Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc. Consideration for full time employment: Our Cooperative Learning Internships program is utilized as a talent pipeline for our full-time positions! Additional details regarding Honda Co-op and Intern benefits are provided upon offer.

This position is a 12-week paid internship located in Bloomington, Indiana supporting the initiatives of the Materials Science team. It is offered for a period extending from mid-May through mid-August (exact dates depend on school calendars.) This position includes 401(k) options, an assigned mentor, capstone presentation, and intern events. If working onsite, you will also have access to a fitness center, an onsite cafeteria option, and a one-time housing stipend. All internship positions are assigned a direct mentor and each position provides real-world experience experience with meaningful projects in the Medical Device Manufacturing Industry. Responsibilities * Follow procedures pertinent to tasks being performed * Provide support to other Materials Science team members upon request and where reasonable * Learn quickly about project background and project objectives * Coordinate resources to meet project needs and deadlines * Ensure accurate and complete documentation Qualifications * College or University Junior or Senior preferred working towards a bachelor's degree in Materials Science, Materials Engineering, Chemical Engineering, or Chemistry (Graduate students also considered) - Minimum GPA of 3.0 - Must provide proof of enrollment in an accredited college or university Qualified candidates must be legally authorized to be employed in the United States without any need for current or future visa sponsorship. Cook does not intend to provide sponsorship for employment visa status (e.g., H-1B or TN status) for this temporary position and will not consider candidates that have a future sponsorship need. Physical Requirements: * On-site and hybrid positions that work under general office environmental conditions - Sitting for extended periods, utilizes close visual acuity for working with computers, equipment, etc. - Personal protective equipment including safety glasses, lab coat and gloves may be required in some areas associated with this position * Must be able to perform the essential functions of the job, subject to reasonable accommodation requirements under the ADA.

Toyota Material Handling (TMH) is seeking outstanding students for our summer internship program. We currently have an opening within our Quality Assurance Department . The ideal candidate should be able to exhibit a high level of professionalism and sense of urgency. The intern will be assigned a specific project which is expected to be completed during the duration of the summer program. In addition, the intern will have the opportunity to collaborate with the current Quality Engineers to lead corrective and preventative actions for non-conforming goods and warranty. This position will be based out of the Quality Assurance Lab. The QA Lab supports day-to-day operations by performing contamination, weld, and dimensional testing on production and supplier parts, as well as assisting with gage calibration and verification activities. You will collect and analyze test data using Excel and Power BI, helping to identify trends and support countermeasure activities. You will gain hands-on experience with laboratory instruments such as microscopes, particle counters, and precision measurement tools while learning to document test procedures and results in a way that supports internal reporting and audits. Throughout the internship, you will collaborate closely with Quality Engineers and Lab Technicians, contributing to the resolution of non-conforming part issues and participating in continuous improvement efforts that directly impact manufacturing quality. What We're Looking For: Cumulative GPA of 3.0 or higher Students pursuing a degree in engineering (preference in mechanical or industrial engineering). Strong analytical and research skills. Proficient with MS Office applications and highly talented in Excel. Must be able to problem solve and handle multiple tasks effectively. Results oriented and strong communication skills with the ability to visualize data and communicate effectively at any level. What Sets You Apart: Coursework or prior experience in metrology, welding, or laboratory practices is a plus. Preferred experience with Microsoft PowerBi. Ability to prioritize work and manage time with limited guidance. Ability to adapt easily to change and work in a fast-paced environment, acting with sense of urgency when faced with organizational risk. Where and When You'll Work: This is an in-person role located at our Columbus, IN office-ideal for those who thrive in a hands-on, team-oriented environment. What You'll Get in Return: Wage - $22.00 - $26.00 per hour. Compensation depends on the selected candidate's education and experience. Early Career Benefits: Paid Housing (furnishings, utilities, & Wi-Fi included) Mentorship from Experienced Professionals Direct Exposure to Senior Leadership & Executive Team Company-Sponsored Events & Intern Socials Paid Community Service Hours Onsite Fitness Center & Occupational Health Clinic Mental Health Advocate Services Best in class work culture! Big Name | Big Opportunities | Life is Better at Toyota Toyota Material Handling North America (TMHNA), the industry leader in forklift sales, comprises two main brands: Toyota Material Handling and The Raymond Corporation. We believe investing in the best people, products, and processes will fuel our future success, and we will always be driven by our foundational principles of “respect for people” and “continuous improvement”. With opportunities across North America, we are confident you will find the right position within TMHNA that can help you build a long, fulfilling career. Learn more here: https://www.toyotaforklift.com/careers https://careers.raymondcorp.com/careers Follow us on Social Media: Working at Toyota Material Handling | Glassdoor

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), **onsite** position with a competitive hourly pay rate and eligible for overtime pay. **This position will start ~January 2026 and go through the Spring 2026 semester. Dates are flexible with school calendar.** Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Produce detailed layout and equipment details of HVAC systems, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements** : + Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), + Strong interest in Building Systems Mechanical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. \#LI-CM1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

Line of Business: Other About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Assist with mine planning, design, and optimization projects Support data collection and analysis for production and safety improvements Collaborate with operations teams on equipment and blasting efficiency Participate in environmental and regulatory compliance initiatives Contribute to continuous improvement and cost-reduction efforts What Are We Looking For Currently pursuing a degree in Mining Engineering or a related field Strong analytical and problem-solving skills Effective communication and teamwork abilities Willingness to work in both field and office environments Self-motivated with a proactive approach to learning and contributing Work Environment This internship involves both office and fieldwork in an active mining environment. Interns will be trained in safety protocols and expected to follow all site-specific safety and environmental guidelines. What We Offer Competitive hourly pay Summer Housing Allowance Regional Travel to other mining sites and cement operations Equal Opportunity Employer - Minority / Female / Veteran / Disabled #Intern

This position is a 12-week paid internship located in Bloomington, Indiana. It is offered for a period extending from mid-May through mid-August (exact dates depend on school calendars.) This position includes 401(k) options, an assigned mentor, capstone presentation, and intern events. You will also have access to a fitness center, an onsite cafeteria option, and a one-time housing stipend. All internships provide hands-on experience with meaningful projects in the Medical Device Manufacturing Industry. Responsibilities • Follow procedures pertinent to tasks being performed • Provide support to other Global Sterilization and Packaging team members upon request and where reasonable • Learn quickly about project background and project objectives • Coordinate resources to meet project needs and deadlines • Ensure accurate and complete documentation Qualifications • All candidates should have an interest in a career in the Life Sciences field, a willingness to take initiative, and an ability to work well with others • Candidates should be working toward a bachelor's degree in Microbiology, Biology, Life Sciences, Engineering, Packaging Engineering, or Chemistry • Candidates should be students entering their Junior or Senior year the following fall semester or entering graduate school; candidates who graduate the spring semester before this internship are also eligible • A minimum GPA of 3.0 is preferred • All candidates must provide proof of enrollment (including pre-registration certification for the following fall) for consideration • Multiple disciplines will be considered (e.g., Marketing, Life Sciences, General Business, and Management) • Conscientious person with good work ethic • Understand and accept requests with an "I can help you" attitude • Teachable, positive attitude with a genuine willingness to learn • Personal discipline • Excellent organizational skills • Proficient with Microsoft Office • Willingness to help • Ability to work with multiple persons and with multiple priorities that occur when each person has different needs • Extreme attention to detail Physical Requirements • Works under general office environmental conditions • Sitting for extended periods, utilizes close visual acquity for working with computers, equipment, etc. • Personal protective equipment including safety glasses, lab coat, and gloves may be required in some areas associated with this position

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start ~January 2026 and go through the Spring 2026 semester. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Produce detailed layout and equipment details of HVAC systems, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), Strong interest in Building Systems Mechanical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. #LI-CM1 #LI-Onsite

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. About the Role Caterpillar's Manufacturing, Supply Chain, and Order-to-Delivery (MSOD) Intern program seeks students currently enrolled in a four-year university to work alongside manufacturing professionals to learn and apply themselves to project work within their teams. Interns will have assignments that provide them with experience and significant learning opportunities. In addition to this work, Interns can network with management throughout the company to learn about Caterpillar areas outside their assigned team. Students can deepen their business skills in their assignments through team and business partner interactions, develop their skills, conduct presentations, and measure their success through the performance and evaluation process. What You Will Do You'll join a team with diverse project responsibilities and have valuable networking opportunities with all levels of Caterpillar employees. The internship is a 40-hour-per-week assignment lasting 12 weeks. You'll join a team with diverse project responsibilities and have experiences including (but not limited to): * Manufacturing Engineering : Responsible and accountable for enhancements and modifications to equipment and processes in our facilities, monitoring equipment and process reliability, identifying and addressing problem areas and providing engineering support on equipment, processes, or facilities * Quality: Analyzing non-conformance data and maintaining quality system documentation. Participating in and offering technical support to internal and external audits; following up response of corrective action from audit. Interacting with manufacturing team members to determine the root cause of quality issues and ensure that corrective and preventive action is implemented. * Automation: Collecting and researching data on customer experience with robotic platforms. Documenting architecture specifications, software design description, verification plans, test cases, operating procedures, and safety procedures. Utilizing appropriate tools to debug, test and maintain software and hardware systems of robotic tools; assisting in the verification and validation process. Participating in design and development of application software and algorithms for robotic platforms. What You Have - Skills and Experiences In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills. * Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities * Organize and manage multiple projects simultaneously, ability to quickly gain and effectively apply new skills & knowledge * Success in collaborating with others of diverse cultures, interpersonal styles, and abilities * Strong written and verbal communication skills * Participate in and build on our inclusive, constructive, and productive work environment * Ensure all team members' contributions are recognized and valued Internship Program Qualifications: * Must be enrolled full-time in a 4-year university/college in one of the following degree programs: Engineering, Engineering Management/Technology, Industrial Distribution/Technology, Automation Engineering Technology, Mechatronics, Robotics, Mechanical Engineering, Electrical Engineering, or other relevant degrees at the time of application and throughout the program. * Must have 30 completed semester hours before the start of the internship. * If a transfer student must have 12 semester hours completed at a 4-year university. * Minimum 2.8/4.0 Cumulative Grade Point Average (no rounding) at current institution. * Must be able to relocate to indicated work location for the duration of the internship and complete daily work commute using reliable transportation. Top candidates can also have: * Project or Team Leadership experience * Previous internship, co-op, or research/relevant experience * Excellent interpersonal and communication skills Additional Information: * Please attach your resume and an unofficial copy of your transcript to your application. * Applicants will be considered for positions throughout the United States. * Sponsorship is NOT available for this position. * Relocation is available to those that qualify * This position requires working onsite five days a week. Besides exciting work, Corporate Interns will experience: * Comprehensive internship orientation * Tours of state-of-the-art manufacturing and research facilities * Product Demonstration * Mentorship Programs * Various social events * Networking with leadership * Business skill building * Career discussion with leaders and experts Final details: Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in on our career website as it will reflect any updates to your status. Qualified applicants of any age are encouraged to apply. For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Summary Pay Range: $25.00 - $43.00 Intern Hour Rate: An intern's hourly rate is based on the major/degree being pursued and the number of completed academic hours achieved before the start of the internship. Intern Benefits: The total rewards package, beyond base salary, may include if eligible: * Accrued Paid Time Off (PTO) * Paid Holidays * Paid Volunteer Day * Housing Stipend * Relocation Assistance * Medical coverage * Voluntary benefits Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: December 2, 2025 - March 30, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Internship Description With offices across Illinois, Indiana, Kentucky, Michigan, and Wisconsin, Clark Dietz, Inc. is a 100% employee-owned ENR Top 500 Design Firm. We are recognized leaders in transportation, civil, environmental, structural, mechanical, electrical and construction engineering. We succeed Together and believe that an inclusive workplace builds stronger teams and better solutions for our clients and communities. Our culture promotes innovation, and professional growth through collaboration, mentoring and Communities of Practice. Internship Overview Clark Dietz internships provide a great opportunity to apply academic learning to real world engineering projects through hands on experience. Interns also participate in group activities throughout the summer to learn about the engineering profession, technical areas, and career paths. As a Civil Engineer Intern, you will work as part of a team on a variety of municipal infrastructure and roadway projects. Duties can include assisting with design, plan development, drainage, roadside grading, 3D surface modeling, and layouts on project sites. Requirements Students with a declared major in Civil Engineering and an interest in experiencing a variety of disciplines are encouraged to apply. Ability to read and interpret construction plans and documents and research specifications and codes as needed. Ability to perform basic calculations to compute quantities, verify measurements, and organize and analyze data. Good organizational skills with strong attention to detail and a willingness to perform a variety of tasks with guidance from other staff. Good communication and listening skills with the ability to ask insightful questions and learn and apply new skills. Previous experience using CAD software (AutoCAD, Civil 3D, Bentley ORD, MicroStation) is desired. Proficiency with MS Office (Excel & Word) is required. Valid driver's license and vehicle for commuting to project sites is required. What's in it for you? Competitive Hourly Rate: Based on experience and academic year. Hands-On Experience: Contribute to impactful projects and gain practical experience. Mentorship: Learn from professionals dedicated to your growth and success. Networking: Build connections with teammates and leaders. Skill Development: Sharpen your technical and soft skills through project work. Perks: Intern swag kit and safety gear provided. Events: Engage in learning and social activities throughout the summer. To learn more about our firm and why we are a Great Place to Work, visit ****************** Clark Dietz is an Equal Opportunity Employer. We welcome applicants from all backgrounds and experiences. Salary Description $20-26/hour, based on experience and academic year

Job DescriptionSalary: ABOUT NAR Simulation Our mission is to develop and produce realistic training tools that provide the realism demanded by our military and emergency medical clients. In addition to the realism, true training tools need to be a complement to training exercises, not a piece that demand time and attention. Training sessions are effective, both in cost and in educational value, when they can be repeated with minimal interruption they must serve the greatest number for the greatest amount of time. This NAR Associate will participate as a TEAM member within the Simulations department and help facilitate smooth processes among other team members. ESSENTIAL RESPONSIBILITIES This is not an all-inclusive list of duties and responsibilities. Projects/duties may be change as dictated by the needs of the business. 3-D Modeling skills. Ability to design mechanical parts and small subsystems with guidance from senior engineering staff. Familiarity with AutoCAD 360 is a plus, but applicable experience with other packages such as Solidworks, NX, Pro-E, Creo, or CATIA is acceptable. 2-D Drafting skills. Ability to create detailed 2-D drawings of parts and sub-assemblies is essential. Familiarity with GD&T is a plus, but not required (will train as needed). Hands-on prototyping skills. Familiarity with safe use of basic hand tools for building/modifying prototypes is essential (screwdrivers, hammers, files, saws, hand drills, Dremel, soldering iron, etc.). The ability to observe and follow shop safety protocols when in the workshop area is a must. Familiarity with additive manufacturing methods is a definite advantage. We maintain an on-site 3D printer farm for prototyping and short-run manufacturing. If you dont have prior experience with 3D printing, please bring a desire to learn (will train as needed). Punctual and dependable. As a student position, work scheduling is flexible relative to your class schedule, but once hours are set for the semester adherence to the agreed upon schedule is expected. Job responsibilities require use of on-site materials and equipment, therefore this position is not considered eligible for remote work. Reliable transportation to and from our LaGrange, KY facility is required. AUTHORITY Works on a small multi-disciplinary engineering team Reports to lead Mechanical Engineer. ACCOUNTABILITY Provides design support to the engineering team QUALIFICATIONS Education Junior level status towards a BS in an ABET accredited Mechanical Engineering program. Proof of enrollment is required. Competency and Skills Basic computer skills (Word, Excel, e-mail). Knowledge of at least one aforementioned CAD package. Knowledge of fundamental Mechanical Engineering principles. Understanding of common manufacturing methods. Experience Prior work experience a plus, but not required. Specific Characteristics Self-starter ability to carry a task from start to finish with minimal direction. Task oriented ability to define tasks from vague concepts, handles multiple tasks, prioritizes, periodically provides updates to supervisor. Builds effective working relationships. Consistently applies good communication skills: both oral and written. Possesses strong quality orientation, attention to detail, and personal desire to meet/exceed requirements. Works effectively and efficiently with limited direction and supervision. Demonstrates ability to change direction and focus as directed. DEMANDS Time and Availability Must be able to work a minimum of 15 hours, but not exceeding 40 hours, each week. Schedule to be determined dependent on class schedule within our normal operating hours of 8:00 AM and 5:00 PM, Monday Friday. Travel Travel is optional as schedule permits. Travel will generally be limited to the greater Louisville, KY area and not to exceed 10% of the time. Physical The physical demands described here are representative of those that must be met by a typical office employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasional bending, stooping, squatting, kneeling, crawling, reaching, and lifting of up to 25 lbs. Environment Must be able to work in a moderate industrial noise level environment up to 80 dB (not needed on a consistent basis but will need occasionally) Must be able to work in a non-smoking facility. Due to the nature of our business, you will encounter simulated sounds and images of a medically graphic nature. Discretion is advised. You may be inadvertently exposed to smoke, dust, engine exhaust, coolant mists, organic vapors, sudden loud noises and/or bright flashing lights while working in our facility. Any disabilities relating to the aforementioned will be reasonably accommodated and PPE will be provided as needed. DISCLAIMERS AAP/EEO Statement NAR Training, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of these characteristics. Discrimination of any type will not be tolerated.

2026 Spark Summer Intern - Civil / Environmental Engineering S&ME is a leading, employee-owned, multi-disciplined professional services firm that responds to clients with innovative, sustainable solutions. S&ME strives to create an environment where everyone can be their best by providing a supportive atmosphere of entrepreneurial growth, to build growing relationships, and to take on increasingly complex project opportunities. We recruit top talent and are excited to begin taking applications for our 2026 Spark Summer Internship Program. Learn more about us in this video: ********************** and visit our website: *********************** S&ME's Spark Internship Program is open to current students from a variety of different educational backgrounds and career focus. Internship opportunities are available across our various Service Lines including: Civil Engineering, Construction Services and Materials Testing, Environmental Services and Industrial Hygiene, Geotechnical Engineering, and Transportation Design-Build. As part of the 2026 Spark Internship Program, you will work alongside experienced professional and technical employee-owners within your area of interest. You will be a part of an intern cohort and will learn about all aspects of S&ME. S&ME's internship will provide you with invaluable hands on experience, access to technical experts across the company, as well as provide professional development to help you transition from campus to career and find success in our industry. Qualifications: * Enrolled in a related degree program; Rising Juniors, Seniors, or Graduate students preferred; * Related experience and/or campus, community, work-related leadership experience preferred; * At least 18 years of age; * Out of town travel may be required; * For technical roles the ability to work outdoors in varying weather conditions is required; * Routine lifting may be required: 40 to 50 lbs. Why work at S&ME? We are an industry leading, 1,100 employee-owned engineering firm, which means the hard work and dedication you provide every day directly contributes to the health and performance of a company you partly own. With employee ownership at our foundation, we are all vested in the success of each other and S&ME as a whole. We know that creating an environment where employees can grow and flourish, both professionally and personally, leads to our collective drive for success. We offer professional development, leadership and employee engagement programs and tasks forces to exemplify our purpose of "helping you prosper" and our commitment to culture. These are full-time, internship positions for a twelve-week period from May 2026 through August 2026 with competitive pay based on experience. Housing or a housing stipend will not be provided. Successful candidates must meet requirements of the company's Fleet Management Program, Substance Policy and Reference check program. Submit resume, cover letter, and salary expectations for consideration. Only qualified candidates with acceptable employment eligibility verification (I-9) will be considered. Visa assistance not provided. S&ME reserves the right to fill this position with an internal or external candidate at any time during the search. S&ME is not responsible for unauthorized job postings or submissions of resumes using external links/websites. No candidate/recruiter calls, personal calls or walk-ins accepted.

2026 GAYLOR ELECTRIC SUMMER INTERNSHIP PROGRAM - COLLEGE STUDENTS Whether you're a current student, recent graduate or a seasoned professional, you can experience meaningful career growth at Gaylor Electric. Combining access to industry-leading technical skill development and world-class, career-related professionalism training. Over the past three years, our program has welcomed students from 70+ high school and collegiate institutions. With over 200 students for our summer program, students are placed across the county at national Gaylor Electric locations and job sites. Sprinkled throughout the summer, students have access to resume development, interview prep, business best practices discussions, and professional headshots. This experience culminates with an academic capstone presentation or craft skills assessment. Why Gaylor Electric? Gaylor Electric's internship programming combines an opportunity for construction career exploration, the honing of technical skills, and robust professionalism. We offer positions in the Field, Manufacturing, Project Management, Engineering, BIM/VDC, Safety and Corporate roles such as Accounting, Human Resources, Education, Information Technology and Marketing. Students will not only develop skills in positions related to their academic field of study, but will do intense curation of their professional resumes, interview habits, networking skills, and professionalism approaches. They become valued members of the Gaylor Electric culture and learn what it means to hold a high-value, high-opportunity position in the trades. Our Summer Internship program is an 8-to-10-week paid opportunity. Your internship, at Gaylor Electric, can be the perfect opportunity to expand your knowledge outside of the classroom and apply the concepts and theories of your major field of study. The hands-on real-world experiences that you encounter during our internship program enable you to develop your potential and make key contacts for future networking. Use your internship to determine your interest level in certain career fields, get feedback from professionals regarding your strengths and weaknesses, and to further your education and expand your resume. Things we love to see in our Interns: Purpose, Resolve, Determination Positive impact and influence on others Grit - the ability to stick to it and get the job done Consistency and a strong work ethic Holds oneself accountable Customer focused Team spirit and collaboration Detail oriented and organized Strong communication skills About You: You're pursuing a degree that aligns with Gaylor Electric's needs: Construction Management Engineering (Architectural Engineering, Electrical, Civil and Construction) Occupational Health & Safety Business, Finance, Marketing, Accounting or any other related college or work-related experience Excited to visit and travel to new locations and projects Internship Benefits: On-the-job experience and training in your specific role Opportunity to work with some of the brightest and most talented people in the industry Paid internship Potential full-time employment opportunities in any of our locations Internship Locations: Indianapolis, IN; South Bend, IN; West Lafayette, IN; Columbus, IN; Louisville, KY; Columbus, OH; Cincinnati, OH; Nashville, TN; Huntsville, AL; Atlanta, GA; Charlotte, NC; Fort Myers, FL; Orlando, FL; Tampa, FL GAYLOR ELECTRIC, INC. is an equal opportunity employer including disability and veterans.

Simtra BioPharma Solutions (Simtra) is a world-class Contract Development Manufacturing Organization, partnering with pharmaceutical and biotech companies to bring their sterile injectable products to market. With facilities in Bloomington, Indiana, US and Halle/Westfalen, Germany, we offer a wide range of delivery systems including pre-filled syringes, liquid/lyophilized vials, diluents for reconstitution, powder-filled vials and sterile crystallization. Our product types include biologics and small molecules, cytotoxics, highly potent compounds, diluents for reconstitution and vaccines - which are all directly injected into patients worldwide. As such, there is a strong emphasis on quality and continuous improvement at Simtra. We hold ourselves to the highest quality and regulatory standards. While our primary focus is cGMP manufacturing, we offer many support services including formulation and development, lyophilization optimization, global regulatory support and secondary packaging. Our teams are driven to help clients scale, innovate and bring life-changing medicines to patients worldwide. Why join Team Simtra? Because we: Make it HAPPEN - We bring a growth mindset to every opportunity, developing new skillsets and exceeding our expectations and those of our customers. Make it TOGETHER - We work as one, respecting each voice and tapping into our unique strengths across teams-so we can solve problems in new ways. Make it RIGHT - We hold ourselves to a high standard of excellence, fulfilling our commitments to the customer, their patients, and our team members. Make it COUNT - We take pride in our day-to-day work, knowing the impact we make - taking on challenges big and small to improve patient health. The Role: Simtra is seeking highly motivated undergraduate and graduate students for our inaugural Spring Co-Op Program. We look for diverse students with inquisitive minds and the desire to challenge themselves. Our co-ops will work closely with industry professionals and learn quickly how to problem solve on real-world projects that contribute to clinical research and manufacturing processes. In addition to on-the-job experience, we offer learning sessions with top leadership, site visits to local projects and social events. The Opportunity: The Process Engineering - Packaging and Inspection team ensures the sterile injectable automated inspection and packaging lines run the way the business, the client, and the regulation agencies need them to run - reliable, efficient, and compliant. This team supports the day-to-day packaging operations at the Bloomington facility. Responsibilities/Projects: The Process Engineering-Packaging & Inspection Summer Intern will support specific equipment lines. They will focus on supporting the engineering/maintenance/manufacturing teams in driving process optimization excellence in a sterile injectable inspection and packaging manufacturing facility. They work on equipment qualification, data analysis, troubleshooting, and continuous improvement initiatives. Key activities will include: Monitor throughput, yields, downtime, rejections to develop continuous improvement and suggest process optimization Ensure process line configuration, set-ups, and parameters match validation Support projects to: increase improve equipment reliability and reduce scrap and improve run rates, etc. and write technical documentations (change controls, work orders, SOP updates) Investigate out of specification, root cause, and deviations and provide corrective/preventive actions Participates in all collaborations with internal stakeholders and external OEM's in the design and onboarding of new inspection and packaging equipment Interacts with all functions and levels of management ensuring effective, ongoing communications across teams and stakeholders Assists Project Managers/Engineers on project deliverables Required Qualifications: Pursuing a BS or MS degree in Engineering (Packaging, Mechanical, Chemical, Industrial, Biomedical, or Electrical) or related technical field Advanced proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) Strong interest in pharmaceutical manufacturing, process/packaging engineering, and regulated industry Must be able to read mechanical, electrical, and P&ID drawings Excellent organizational, oral and written communication skills Strong attention to detail including the ability to accomplish a task while demonstrating a thorough concern for all the areas involved. Proficiency in data analysis Strong interpersonal skills and the ability to work well with others in a proactive, positive and constructive manner Highly motivated, self-driven individual with passion working within pharmaceutical industry Onsite Campus Amenities: Workout Facility Cafeteria Credit Union Disclaimer This job description is intended to provide the minimum knowledge, skills and abilities necessary to perform the job. It may not be inclusive of all the duties and responsibilities of the job. Simtra reserves the right to make modifications based on business requirements. Equal Employment Opportunity Simtra is proud to be an equal opportunity employer. Simtra evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Data Privacy To learn more about Simtra's approach to data privacy, please review the Simtra Recruitment Platform Global Privacy Policy: **********************************

In this role, you will make an impact in the following ways: + Applies developing business process and project management skills within an area of business or technical specialty. + Manages small portions of well-defined projects. Provides administrative and logistics support for a project team and project manager. + Serves as a resource on projects and work assignments; employs basic knowledge of effective project management and general business understanding. + Identifies, tracks, and orks with others to resolve project issues. + Monitors and communicates project status to project team. + Assists with budget planning and tracking, research, and analytical support; provides input into the design and development of project plans and timelines. + Assists with managing project risk; uses quality tools to identify areas of risk. + Documents and shares team learnings with other teams; draws on other experiences to enhance the success of the project. + Maintains project notes, databases, and other records; monitors measures and communicates with Project Manager on status of specific projects and assignments. **RESPONSIBILITIES** To be successful in this role you will need the following: + Schedule Management + Scope Management + Project Resource Management + Project Issue and Risk Management + Customer focus + Manages Complexity + Manages Conflict **QUALIFICATIONS** **Degree Programs Considered:** Bachelor's, Master's, PhD **Major Programs Typically Considered:** Service (Non-Technical) degrees; Product Management **2025 Monthly Range by Degree Level:** + Bachelor's - $3,500 - $4,400 + Master's - $5,600 + MBA - $7,000 - $9,400 Please note that the salary range provided is a good faith estimate on the applicable range. The final salary offer will be determined after considering relevant factors, including a candidate's qualifications and experience, where appropriate. **Internship program criteria:** + Must be a full-time enrolled student pursuing an undergraduate or graduate degree at an accredited U.S. college/university + Minimum 2.5 or above GPA preferred + Must be able to complete a minimum of 10-weeks, to a maximum of 12-weeks commitment + Must be able to complete 40 hours per week + Willingness to learn from others on the job + Must be currently residing within the continental U.S. **Cummins and E-verify** At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Ready to think beyond your desk? Apply for this opportunity to start your career with Cummins today. careers.cummins.com Not ready to apply but want to learn more? Join our Talent Community to get the inside track on great jobs and confidentially connect to our recruiting team: ****************************** **Job** Service **Organization** Cummins Inc. **Role Category** On-site with Flexibility **Job Type** Student - Internship **ReqID** 2422781 **Relocation Package** No **100% On-Site** No **Cummins and E-Verify** At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify and will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Visit *************** to know your rights on workplace discrimination.

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **About the Role** Caterpillar's Manufacturing, Supply Chain, and Order-to-Delivery (MSOD) Intern program seeks students currently enrolled in a four-year university to work alongside manufacturing professionals to learn and apply themselves to project work within their teams. Interns will have assignments that provide them with experience and significant learning opportunities. In addition to this work, Interns can network with management throughout the company to learn about Caterpillar areas outside their assigned team. Students can deepen their business skills in their assignments through team and business partner interactions, develop their skills, conduct presentations, and measure their success through the performance and evaluation process. **What You Will Do** You'll join a team with diverse project responsibilities and have valuable networking opportunities with all levels of Caterpillar employees. The internship is a 40-hour-per-week assignment lasting 12 weeks. You'll join a team with diverse project responsibilities and have experiences including (but not limited to): + **Manufacturing** **Engineering ** : Responsible and accountable for enhancements and modifications to equipment and processes in our facilities, monitoring equipment and process reliability, identifying and addressing problem areas and providing engineering support on equipment, processes, or facilities + **Quality** : Analyzing non-conformance data and maintaining quality system documentation. Participating in and offering technical support to internal and external audits; following up response of corrective action from audit. Interacting with manufacturing team members to determinethe root cause of quality issues and ensure that corrective and preventive action is implemented. + **Automation:** Collecting and researching data on customer experience with robotic platforms. Documenting architecture specifications, software design description, verification plans, test cases, operating procedures, and safety procedures. Utilizing appropriate tools to debug, test and maintain software and hardware systems of robotic tools; assisting in the verification and validation process. Participating in design and development of application software and algorithms for robotic platforms. **What You Have - Skills and Experiences** In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills. + Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities + Organize and manage multiple projects simultaneously, ability to quickly gain and effectively apply new skills & knowledge + Success in collaborating with others of diverse cultures, interpersonal styles, and abilities + Strong written and verbal communication skills + Participate in and build on our inclusive, constructive, and productive work environment + Ensure all team members' contributions are recognized and valued **Internship Program Qualifications:** + Must be enrolled full-time in a 4-year university/college in one of the following degree programs: Engineering, Engineering Management/Technology, Industrial Distribution/Technology, Automation Engineering Technology, Mechatronics, Robotics, Mechanical Engineering, Electrical Engineering, or other relevant degreesat the time of application and throughout the program. + Must have 30 completed semester hours before the start of the internship. + If a transfer student must have 12 semester hours completed at a 4-year university. + Minimum 2.8/4.0 Cumulative Grade Point Average (no rounding) at current institution. + Must be able to relocate to indicated work location for the duration of the internship and complete daily work commute using reliable transportation. **Top candidates can also have:** + Project or Team Leadership experience + Previous internship, co-op, or research/relevant experience + Excellent interpersonal and communication skills **Additional Information:** + Please attach your resume and an unofficial copy of your transcript to your application. + Applicants will be considered for positions throughout the United States. + Sponsorship is **NOT** available for this position. + Relocation is available to those that qualify + This position requires working onsite five days a week. Besides exciting work, Corporate Interns will experience: + Comprehensive internship orientation + Tours of state-of-the-art manufacturing and research facilities + Product Demonstration + Mentorship Programs + Various social events + Networking with leadership + Business skill building + Career discussion with leaders and experts **Final details:** Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in on our career website as it will reflect any updates to your status. Qualified applicants of any age are encouraged to apply. For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at *************************** . **Summary Pay Range:** $25.00 - $43.00 **Intern Hour Rate:** An intern's hourly rate is based on the major/degree being pursued and the number of completed academic hours achieved before the start of the internship. **Intern Benefits:** The total rewards package, beyond base salary, may include if eligible: + Accrued Paid Time Off (PTO) + Paid Holidays + Paid Volunteer Day + Housing Stipend + Relocation Assistance + Medical coverage + Voluntary benefits Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at ***************************. **Posting Dates:** December 2, 2025 - March 30, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

ABOUT NAR Simulation Our mission is to develop and produce realistic training tools that provide the realism demanded by our military and emergency medical clients. In addition to the realism, true training tools need to be a complement to training exercises, not a piece that demand time and attention. Training sessions are effective, both in cost and in educational value, when they can be repeated with minimal interruption - they must serve the greatest number for the greatest amount of time. This NAR Associate will participate as a TEAM member within the Simulations department and help facilitate smooth processes among other team members. ESSENTIAL RESPONSIBILITIES This is not an all-inclusive list of duties and responsibilities. Projects/duties may be change as dictated by the needs of the business. 3-D Modeling skills. Ability to design mechanical parts and small subsystems with guidance from senior engineering staff. Familiarity with AutoCAD 360 is a plus, but applicable experience with other packages such as Solidworks, NX, Pro-E, Creo, or CATIA is acceptable. 2-D Drafting skills. Ability to create detailed 2-D drawings of parts and sub-assemblies is essential. Familiarity with GD&T is a plus, but not required (will train as needed). Hands-on prototyping skills. Familiarity with safe use of basic hand tools for building/modifying prototypes is essential (screwdrivers, hammers, files, saws, hand drills, Dremel, soldering iron, etc.). The ability to observe and follow shop safety protocols when in the workshop area is a must. Familiarity with additive manufacturing methods is a definite advantage. We maintain an on-site 3D printer farm for prototyping and short-run manufacturing. If you don't have prior experience with 3D printing, please bring a desire to learn (will train as needed). Punctual and dependable. As a student position, work scheduling is flexible relative to your class schedule, but once hours are set for the semester adherence to the agreed upon schedule is expected. Job responsibilities require use of on-site materials and equipment, therefore this position is not considered eligible for remote work. Reliable transportation to and from our LaGrange, KY facility is required. AUTHORITY Works on a small multi-disciplinary engineering team Reports to lead Mechanical Engineer. ACCOUNTABILITY Provides design support to the engineering team QUALIFICATIONS Education Junior level status towards a BS in an ABET accredited Mechanical Engineering program. Proof of enrollment is required. Competency and Skills Basic computer skills (Word, Excel, e-mail). Knowledge of at least one aforementioned CAD package. Knowledge of fundamental Mechanical Engineering principles. Understanding of common manufacturing methods. Experience Prior work experience a plus, but not required. Specific Characteristics Self-starter - ability to carry a task from start to finish with minimal direction. Task oriented - ability to define tasks from vague concepts, handles multiple tasks, prioritizes, periodically provides updates to supervisor. Builds effective working relationships. Consistently applies good communication skills: both oral and written. Possesses strong quality orientation, attention to detail, and personal desire to meet/exceed requirements. Works effectively and efficiently with limited direction and supervision. Demonstrates ability to change direction and focus as directed. DEMANDS Time and Availability Must be able to work a minimum of 15 hours, but not exceeding 40 hours, each week. Schedule to be determined dependent on class schedule within our normal operating hours of 8:00 AM and 5:00 PM, Monday - Friday. Travel Travel is optional as schedule permits. Travel will generally be limited to the greater Louisville, KY area and not to exceed 10% of the time. Physical The physical demands described here are representative of those that must be met by a typical office employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasional bending, stooping, squatting, kneeling, crawling, reaching, and lifting of up to 25 lbs. Environment Must be able to work in a moderate industrial noise level environment up to 80 dB (not needed on a consistent basis but will need occasionally) Must be able to work in a non-smoking facility. Due to the nature of our business, you will encounter simulated sounds and images of a medically graphic nature. Discretion is advised. You may be inadvertently exposed to smoke, dust, engine exhaust, coolant mists, organic vapors, sudden loud noises and/or bright flashing lights while working in our facility. Any disabilities relating to the aforementioned will be reasonably accommodated and PPE will be provided as needed. DISCLAIMERS AAP/EEO Statement NAR Training, LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees are treated during employment without regard to any of these characteristics. Discrimination of any type will not be tolerated.

This position is a 12-week paid internship located in Bloomington, Spencer, or Ellettsville Indiana. It is offered for a period extending from mid-May through mid-August (exact dates depend on school calendars.) This position includes 401(k) options, an assigned mentor, capstone presentation, and intern events. If working onsite, you will also have access to a fitness center, an onsite cafeteria option, and a one-time housing stipend. All internships provide hands-on experience with meaningful projects in the Medical Device Manufacturing Industry. Responsibilities This internship will focus on Environmental Health and Safety and work on various projects within Sustainability. Qualifications * All candidates should have an interest in a career in the Life Sciences field, a willingness to take initiative, and an ability to work well with others • Candidates should be students entering their Junior or Senior year the following fall semester or entering graduate school; candidates who graduate the spring semester before this internship are also eligible • A minimum GPA of 3.0 is preferred • All candidates must provide proof of enrollment (including pre-registration certification for the following fall) for consideration • Multiple disciplines will be considered (e.g., Marketing, Life Sciences, General Business, and Management)

This position is a 12-week paid internship located in Bloomington, Spencer, or Ellettsville Indiana. It is offered for a period extending from mid-May through mid-August (exact dates depend on school calendars.) This position includes 401(k) options, an assigned mentor, capstone presentation, and intern events. If working onsite, you will also have access to a fitness center, an onsite cafeteria option, and a one-time housing stipend. All internships provide hands-on experience with meaningful projects in the Medical Device Manufacturing Industry. Responsibilities This internship will focus on Environmental Health and Safety and work on various projects within Sustainability. Qualifications • All candidates should have an interest in a career in the Life Sciences field, a willingness to take initiative, and an ability to work well with others • Candidates should be students entering their Junior or Senior year the following fall semester or entering graduate school; candidates who graduate the spring semester before this internship are also eligible • A minimum GPA of 3.0 is preferred • All candidates must provide proof of enrollment (including pre-registration certification for the following fall) for consideration • Multiple disciplines will be considered (e.g., Marketing, Life Sciences, General Business, and Management)

Simtra BioPharma Solutions (Simtra) is a world-class Contract Development Manufacturing Organization, partnering with pharmaceutical and biotech companies to bring their sterile injectable products to market. With facilities in Bloomington, Indiana, US and Halle/Westfalen, Germany, we offer a wide range of delivery systems including pre-filled syringes, liquid/lyophilized vials, diluents for reconstitution, powder-filled vials and sterile crystallization. Our product types include biologics and small molecules, cytotoxics, highly potent compounds, diluents for reconstitution and vaccines - which are all directly injected into patients worldwide. As such, there is a strong emphasis on quality and continuous improvement at Simtra. We hold ourselves to the highest quality and regulatory standards. While our primary focus is cGMP manufacturing, we offer many support services including formulation and development, lyophilization optimization, global regulatory support and secondary packaging. Our teams are driven to help clients scale, innovate and bring life-changing medicines to patients worldwide. Why join Team Simtra? Because we: Make it HAPPEN - We bring a growth mindset to every opportunity, developing new skillsets and exceeding our expectations and those of our customers. Make it TOGETHER - We work as one, respecting each voice and tapping into our unique strengths across teams-so we can solve problems in new ways. Make it RIGHT - We hold ourselves to a high standard of excellence, fulfilling our commitments to the customer, their patients, and our team members. Make it COUNT - We take pride in our day-to-day work, knowing the impact we make - taking on challenges big and small to improve patient health. The Role: Simtra is seeking highly motivated undergraduate and students for our Summer Internship Program. We look for diverse students with inquisitive minds and the desire to challenge themselves. Our interns work closely with industry professionals and learn quickly how to problem solve on real-world projects that contribute to clinical research and manufacturing processes. In addition to on-the-job experience, we offer learning sessions with top leadership, site visits to local projects and social events. The Opportunity: The Process Automation & Controls team focuses on optimizing and automating manufacturing processes to improve efficiency, quality, and compliance in pharmaceutical production through automation and digital transformation initiatives. Responsibilities/Projects: This position offers experience in working on key projects using Ignition SCADA, PLCs, and SCW. The summer intern will assist in designing, developing, and implementing automated solutions using data collection, analysis, and visualization. The individual will work with cross-functional teams to identify areas for automation and digital transformation and conduct troubleshooting and testing of automated systems to ensure functionality and compliance. Required Qualifications: * Pursuing a BS or MS degree in Automation/Chemical/Mechanical/Electrical/Systems Engineering, Computer Science, or a related field * Currently enrolled as a Junior, Senior, or Graduate Student * Strong understanding of process automation, industrial controls systems (PLC, SCADA), and data analysis * Experience with Python, MATLAB, or other programming languages is a plus * Advanced proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) * Excellent organizational, oral and written communication skills * Strong attention to detail including the ability to accomplish a task while demonstrating a thorough concern for all the areas involved * Strong interpersonal skills and the ability to work well with others in a proactive, positive and constructive manner * Proven critical thinking and creativity skills; solve problems by applying technical and functional experiences * Highly motivated, self-driven individual with passion working within pharmaceutical industry Onsite Campus Amenities: * Workout Facility * Cafeteria * Credit Union Disclaimer This job description is intended to provide the minimum knowledge, skills and abilities necessary to perform the job. It may not be inclusive of all the duties and responsibilities of the job. Simtra reserves the right to make modifications based on business requirements. Equal Employment Opportunity Simtra is proud to be an equal opportunity employer. Simtra evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Data Privacy To learn more about Simtra's approach to data privacy, please review the Simtra Recruitment Platform Global Privacy Policy: **********************************