Garver, LLC jobs in Birmingham, AL - 26 jobs

Thompson Engineering is seeking a Construction Engineering & Inspection (CEI) Inspector to join our Quality Acceptance Team on the West Alabama Highway Design-Build Project. This large-scale, progressive design-build project involves widening Highways 43 and 69 from two lanes to a four-lane divided highway, along with the addition of new bypasses spanning a 74-mile route from Thomasville to Tuscaloosa, Alabama. The project scope includes: * Construction of 23 new bridges * Drainage and utility relocation * Land clearing and grubbing * Installation of 100+ box culverts * Division into 13 segments, each averaging 5.7 miles in length The CEI Inspector will report directly to the Project Manager and may oversee one or multiple project segments. Key Responsibilities * Perform field inspections, observations, and materials testing to ensure contractor compliance with project plans, specifications, and technical provisions. * Maintain accurate and detailed reports of construction activities. * Identify and report nonconformances in contractor work to the Project Manager. * Represent Thompson Engineering in a professional manner when interacting with clients, partner firms, and contractors. * Consistently apply and promote safety standards in all field activities. Skills & Qualifications * High School diploma or equivalent (required) * Roadway construction or survey experience preferred * Valid driver's license * Ability to work outdoors in varying field conditions About Thompson Engineering Founded in 1953, Thompson Engineering began by providing quality assurance for construction projects supporting industrial, infrastructure, and community development. From our roots in materials testing, construction inspection, and environmental services, we have grown into a trusted leader across the Gulf Coast and Southeast. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation lines. Our teams support clients in the industrial, commercial, transportation, federal, and municipal sectors. We deliver end-to-end solutions-from environmental assessments and geotechnical studies to design, project management, and construction oversight. Our comprehensive approach ensures projects are completed safely, efficiently, and to the highest standards of quality. Equal Opportunity Statement Thompson Engineering and Watermark Design Group are Equal Opportunity Employers (M/F/D/V). Pre-employment drug screening and motor vehicle record checks are required.

Thompson Engineering is looking for a motivated and experienced Professional Geologist (PG) to join our Environmental Business Unit. This role focuses on site assessments, remediation, groundwater investigations, and regulatory compliance. The ideal candidate combines technical expertise with regulatory knowledge and a hands-on approach to solving complex environmental challenges. This position is well-suited for a technical seller/doer who can manage projects, mentor junior staff, and contribute to business development. Key Responsibilities Lead and manage environmental site assessments (Phase I & II ESAs), UST closures, and site characterization projects in accordance with state and federal regulations. Design and implement soil and groundwater sampling programs; interpret geologic and hydrogeologic data. Oversee UST removals, upgrades, assessments, and prepare closure reports and corrective action plans. Manage federal environmental projects. Prepare technical reports, including geologic logs, cross-sections, contaminant transport models, and remediation summaries. Coordinate with regulatory agencies (e.g., ADEM, MDEQ, FDEP, LDEQ, TCEQ, EPA) to ensure compliance and facilitate approvals/closures. Evaluate and select remedial technologies (e.g., in-situ chemical oxidation, dual-phase extraction, biosparging). Manage subcontractors, field personnel, and drilling teams during fieldwork. Mentor junior geologists and field staff. Ensure health and safety compliance in field operations (HAZWOPER 40-hour certification required). Support business development through proposals, scopes of work, and client communications. Essential Functions Ensure all scientific/engineering work adheres to professional standards and good scientific practice. Lead project planning, preliminary design studies, and layouts. Consult with clients and stakeholders to determine practical, cost-effective solutions. Select suitable materials, equipment, and methods in accordance with SOPs. Prepare cost estimates, schedules, and specifications. Produce clear, concise technical reports that meet applicable codes and regulations. Organize and direct the work of others to optimize resources and budgets. Supervise, check, and assume responsibility for assigned project work. Coordinate across disciplines (engineering, architecture, estimating, purchasing, etc.). Deliver projects on schedule and within budget. Prepare Phase I & II proposals, plans, and reports; conduct stormwater compliance inspections (NPDES, SWPPPs, SPCC Plans). Perform or oversee field sampling and supervise technicians and junior staff. Support marketing and business development, including project write-ups and resume updates. Follow company policies, procedures, and safety requirements. Other Responsibilities Participate in professional societies and industry activities. Maintain regular and reliable attendance. Perform other duties as assigned. Minimum Requirements Education: BS or MS in Environmental Science, Geology, Hydrogeology, or related field. Experience: Minimum of 10 years in environmental consulting or state/federal environmental regulatory work. Professional Credentials: Alabama Professional Geologist license preferred (or ability to obtain via reciprocity). Professional Engineer registration in Alabama is a plus. Technical Skills: Proficiency in interpreting geologic formations and groundwater data. Knowledge of UST regulations, RCRA, CERCLA, NPDES permitting, and the Clean Water Act. Strong technical writing, data analysis, and communication skills. Other: Valid driver's license; willingness to travel to project sites. Physical Requirements Willingness to work flexible schedules and overtime as needed. Ability to operate a computer and sit for extended periods. Ability to bend, file, and perform inspections/sampling over varied terrain. Strong verbal and written communication skills.

Thompson Engineering is looking for a CEI Inspector in the Birmingham, AL area. CEI Inspectors follow standard procedures in documenting construction projects and inspecting job activities to verify they are in compliance with project plans and specifications. The inspector will be responsible for completing a daily report documenting the labor and equipment used by the contractor to include a description of the work performed and any pertinent conversations with the contractor. The inspector will assist with office work such as plotting cross-sections and computing earthwork quantities. The inspector will report directly to the Senior Inspector and/or the Project Manager. DUTIES 1. Inspect work in progress to ensure conformance with plans and specifications. 2. Inspect workmanship of finished installations for conformity to standards. 3. Maintains required reports of construction inspection activities. 4. Prepares sketches of construction installations that deviate from plans and incorporates changes into master plans. 5. Inspects and test materials incorporated into the project. 6. Drive company vehicle safely to and from worksites 7. Maintains required reports of construction inspection activities. 8. Conduct all work activities in compliance with Thompson Holdings, Inc. Health, Safety & Environmental Management System, safety policies & procedures, safety execution plans and Job Safety and Environmental Analyses. 9. Attend and pro-actively participate in monthly safety meetings, project toolbox safety meetings and safety moments. 10. Ensures regular and on time attendance. 11. Other duties as required. QUALIFICATIONS Minimum Requirements 1. High school diploma or equivalent 2. Valid Driver's License 3. Intermediate math and geometry skills in order to calculate areas, volume, etc. 4. Background in survey preferred Physical Requirements 1. Ability to work in the outside elements of the field up to 100% of the time 2. Must be able to lift a minimum of 50lbs 3. Required to remain standing for a minimum of eight (8) hours per day 4. Must be able to bend, stoop and climb on a ladder 5. Must be able to communicate verbally and in writing 6. Must be able to drive a company vehicle to and from work sites. 7. Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel Our Story Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet-literally -performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required. If you are not physically able to complete the online application process and need assistance, please fax us at ************ to make further accommodations.

Thompson Engineering is seeking a Senior Structural Engineer with specialized experience in bridge design to join our growing Structural Engineering Team. This role is ideal for a seasoned engineer with a strong background in the design of bridges for federal, state, and local government projects. The primary responsibility of this position is to ensure the safety, strength, and integrity of structures we design. The successful candidate will demonstrate expertise in the application of AASHTO codes and state-specific transportation design procedures and will play a key role in the evaluation, design, and reporting of structural systems. Key Responsibilities Perform structural analysis, modeling, and design for a variety of public and private sector projects. Focus on state and local highway bridge design, with additional work including: Commercial building structures Industrial structures (e.g., pipe racks, personnel platforms) Heavy civil foundations Marine and waterfront structures (e.g., piers, bulkheads, wharfs) Retaining walls and similar infrastructure Utilize OpenBridge (LEAP) software for bridge structural analysis. Ensure compliance with state bridge bureau guidelines and specifications. Select materials appropriate for each project to ensure durability and code compliance. Produce technical reports, design documents, and support client communication. Maintain high-quality deliverables and ensure accuracy in engineering documentation. Manage time efficiently across multiple projects with minimal supervision. Collaborate with project managers, contractors, and multidisciplinary teams. Qualifications Education: Bachelor's degree in Civil/Structural Engineering from an ABET-accredited university Experience: Minimum 10 years of bridge design experience Licensure: Must have a current Professional Engineer (PE) license Technical Skills: Proficient in: Structural FEA Analysis OpenBridge (LEAP) MicroStation Microsoft Office (Word, Excel) Certifications: Not required Physical Requirements: Ability to work flexible schedules and overtime as needed Must be able to sit and operate a computer for extended periods Travel required to support projects (as needed). About Thompson Engineering Founded in 1953, Thompson Engineering has a longstanding reputation for delivering high-quality services in construction quality assurance, materials testing, inspection, and geotechnical analysis. Originally serving the Gulf Coast's industrial and infrastructure projects, we've grown into a multidisciplinary firm working on major transportation, economic development, and coastal projects. Today, our teams lead projects that define skylines, coastlines, and transportation corridors across the Southeast. From early-stage environmental assessments and land surveys to cutting-edge design solutions and construction management, we are there from concept to completion.

Job Description Thompson Engineering is looking for a structural Autocad / REVIT Designer to join our team. The Structural Designer I & II is an entry level position up through 5 years of professional work experience. The Designer works closely with Structural Engineers and Architects to perform structural drafting assignments in either Autocad or REVIT. The position requires learning Thompson Engineering's drafting standards and procedures for projects involving buildings, coastal piers and bulkheads, industrial support structures, deep foundations, and other similar structures. The Designer should be well organized, have good verbal communication and problem-solving skills, and have a strong aptitude for follow-through. Essential Functions of the Position Capable of adhering to existing drafting standards and utilizing them properly. Knowledgeable in the operation of Autocad and REVIT software. Able to effectively work both independently and as a part of a larger team, on multiple, short-duration assignments or on single, large, multi-discipline projects. Able to manage the pressures associated with fast-paced environments, critical design tolerances, and tight schedules. Able to adapt his/her schedule to meet needs as they arise (i.e., able to occasionally come in early or stay late to respond to a client's last-minute request). Provide input to the engineer for the resolution of queries from clients or third parties. Must follow company policies and procedures regarding safety and quality. Make occasional field site visits to collect existing structure data and/or dimensions. Minimum Requirements Associates Degree in CAD/Drafting or equivalent preferred, and 0 - 5 years' experience in structural drafting of commercial and/or industrial projects. Must have practicable and verifiable knowledge of AutoCAD and REVIT software. Capable of adhering to existing Drafting/Quality standards and utilizing them properly. The ability to make geometric mathematical computations accurately. The ability to express ideas clearly and concisely, both orally and in writing. Physical Requirements Must be willing to work overtime as needed by the department needs. We estimate 40 hours per week with limited overtime expected. Must be able to operate a computer and sit for long periods of time. Ability to work in the field or outside, able to bend, stoop and climb. About Us: Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Construction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities * Perform field testing of construction materials using a 40-pound nuclear density gauge * Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders * Conduct concrete testing and transport samples to the laboratory for further analysis * Collect, document, and deliver soil samples from job sites to the laboratory * Observe construction activities and accurately record performance data * Perform visual inspections of reinforcing steel (rebar) * Maintain detailed daily field diaries documenting project activities * Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications * Ensure quality and quantity standards are met on all assigned work * Proactively review project documents and testing procedures to understand technical requirements * Communicate professionally and ethically with clients, contractors, and team members * Maintain company-owned equipment in safe, proper working condition * Report any required corrective actions to the Team Leader to ensure work quality meets company standards * Follow all written procedures, company policies, and safety requirements * Complete field activities and reports accurately and in a timely manner * Perform all duties in a professional, ethical manner Additional Responsibilities * Establish personal goals for continuous improvement and job performance * Maintain reliable, punctual, and regular attendance * Attend and actively participate in safety meetings and training programs * Perform other duties as assigned Qualifications Minimum Requirements * High school diploma or equivalent * Minimum of six (6) months of construction materials testing experience * ACI Level I Certification (or ability to obtain) * Nuclear Gauge Certification * Ability to communicate effectively both verbally and in writing * Valid driver's license * Ability to read and write in English * Willingness to travel to various job sites as required * Level and compensation commensurate with experience Physical Requirements * Ability to work flexible schedules and overtime as required by operational needs * Ability to lift and carry a minimum of 50 pounds * Ability to safely operate a company vehicle * Ability to push or pull up to 400 pounds using a wheelbarrow * Ability to walk, stoop, bend, climb stairs and ladders * Ability to work on uneven terrain including concrete, gravel, dirt, and grass * Ability to work at elevated heights and in open structures * Ability to work outdoors for extended periods in varying weather conditions * Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.

Watermark Design Group is seeking a highly experienced and accomplished Senior Architect with a minimum of 10 years of experience to lead complex architectural projects from conceptual design through construction administration. This role combines exceptional design and technical expertise with strong leadership capabilities and a proven track record of successful project delivery. You will collaborate closely with clients to define project vision and scope, while mentoring and guiding junior team members. This position offers the opportunity to influence firm-wide best practices, ensure technical excellence, and drive client satisfaction. Key Responsibilities Lead and manage architectural design for complex commercial, industrial, and municipal projects. Collaborate with multidisciplinary teams to deliver high-quality, innovative solutions. Mentor and guide junior staff to foster professional development and growth. Manage client relationships, project budgets, and schedules to ensure successful outcomes. Oversee construction documentation and administration, ensuring adherence to quality standards. Promote a culture of technical excellence, efficiency, and best practices across the firm. Required Skills and Qualifications Extensive architectural expertise across commercial, industrial, and municipal applications. Strong technical proficiency with Revit, AutoCAD, and other relevant software. Proven project management experience, including managing budgets, schedules, and client expectations. Demonstrated leadership, team-building, and strategic thinking abilities. Excellent communication, negotiation, and client relationship skills. In-depth knowledge of building codes, regulations, and industry standards. Strong attention to detail and commitment to delivering high-quality work. Education and Experience Bachelor's or Master's degree in Architecture from an accredited institution. Minimum of 10 years of experience as a Licensed Architect. Licensure in the State of Alabama is required, with the ability to obtain licenses in other states where Watermark practices.

────────────────────────────────────────────────────────── Thompson Engineering is seeking a skilled and motivated Transportation Engineer with 5-10 years of experience to join our growing transportation design team in our Tuscaloosa, AL office. The ideal candidate will have a solid background in roadway and transportation design and will play a key role in supporting and leading projects from concept through construction. KEY RESPONSIBILITIES ────────────────────────────────────────────────────────── * Prepare roadway and transportation designs, plans, and specifications using OpenRoads Designer or AutoCAD Civil 3D. * Support and lead design efforts for municipal, state DOT, and private transportation projects. * Coordinate with multidisciplinary teams including survey, environmental, and structural staff. * Develop project deliverables including cost estimates, quantities, and design reports. * Serve as a task leader or project engineer on complex assignments. * Assist with client coordination, project management, and mentoring of junior engineers or designers. QUALIFICATIONS ────────────────────────────────────────────────────────── * Bachelor's degree in Civil Engineering. * 5-10 years of professional experience in transportation or roadway design. * Proficiency with OpenRoads Designer or Civil 3D is preferred. * Professional Engineer (PE) license preferred (not required for consideration). * Strong communication, organization, and problem-solving skills. * Ability to work collaboratively in a team environment and manage multiple priorities.

Thompson Engineering is seeking a Construction Engineering & Inspection (CEI) Inspector to join our Quality Acceptance Team on the West Alabama Highway Design-Build Project. This large-scale, progressive design-build project involves widening Highways 43 and 69 from two lanes to a four-lane divided highway, along with the addition of new bypasses spanning a 74-mile route from Thomasville to Tuscaloosa, Alabama. The project scope includes: * Construction of 23 new bridges * Drainage and utility relocation * Land clearing and grubbing * Installation of 100+ box culverts * Division into 13 segments, each averaging 5.7 miles in length The CEI Inspector will report directly to the Project Manager and may oversee one or multiple project segments. Key Responsibilities * Perform field inspections, observations, and materials testing to ensure contractor compliance with project plans, specifications, and technical provisions. * Maintain accurate and detailed reports of construction activities. * Identify and report nonconformances in contractor work to the Project Manager. * Represent Thompson Engineering in a professional manner when interacting with clients, partner firms, and contractors. * Consistently apply and promote safety standards in all field activities. Skills & Qualifications * High School diploma or equivalent (required) * Roadway construction or survey experience preferred * Valid driver's license * Ability to work outdoors in varying field conditions About Thompson Engineering Founded in 1953, Thompson Engineering began by providing quality assurance for construction projects supporting industrial, infrastructure, and community development. From our roots in materials testing, construction inspection, and environmental services, we have grown into a trusted leader across the Gulf Coast and Southeast. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation lines. Our teams support clients in the industrial, commercial, transportation, federal, and municipal sectors. We deliver end-to-end solutions-from environmental assessments and geotechnical studies to design, project management, and construction oversight. Our comprehensive approach ensures projects are completed safely, efficiently, and to the highest standards of quality. Equal Opportunity Statement Thompson Engineering and Watermark Design Group are Equal Opportunity Employers (M/F/D/V). Pre-employment drug screening and motor vehicle record checks are required.

Job Description ──────────────────────────────────────────────────────── Thompson Engineering is seeking an entry-level Transportation Engineer to join our growing transportation design group. This role is an excellent opportunity for recent graduates or early-career professionals eager to develop skills in roadway and transportation design. The ideal candidate will demonstrate enthusiasm for learning, strong attention to detail, and a desire to contribute to meaningful infrastructure projects. KEY RESPONSIBILITIES ──────────────────────────────────────────────────────── • Assist in the design and preparation of roadway, intersection, and transportation project plans under the supervision of senior engineers. • Use OpenRoads Designer and/or AutoCAD Civil 3D to support design tasks. • Prepare project documentation, reports, and quantity estimates. • Collaborate with multidisciplinary teams on transportation and civil infrastructure projects. • Participate in training and mentoring opportunities to build technical and professional skills. QUALIFICATIONS ──────────────────────────────────────────────────────── • Bachelor's degree in Civil Engineering. • 0-3 years of relevant experience (internships or co-op experience a plus). • Interest in transportation engineering and roadway design. • Familiarity or proficiency with OpenRoads Designer or Civil 3D preferred. • Engineer Intern (EI/EIT) certification or eligibility preferred. • Strong written and verbal communication skills with the ability to work collaboratively in a team setting.

Thompson Engineering is looking for a motivated and experienced Professional Geologist (PG) to join our Environmental Business Unit. This role focuses on site assessments, remediation, groundwater investigations, and regulatory compliance. The ideal candidate combines technical expertise with regulatory knowledge and a hands-on approach to solving complex environmental challenges. This position is well-suited for a technical seller/doer who can manage projects, mentor junior staff, and contribute to business development. Key Responsibilities Lead and manage environmental site assessments (Phase I & II ESAs), UST closures, and site characterization projects in accordance with state and federal regulations. Design and implement soil and groundwater sampling programs; interpret geologic and hydrogeologic data. Oversee UST removals, upgrades, assessments, and prepare closure reports and corrective action plans. Manage federal environmental projects. Prepare technical reports, including geologic logs, cross-sections, contaminant transport models, and remediation summaries. Coordinate with regulatory agencies (e.g., ADEM, MDEQ, FDEP, LDEQ, TCEQ, EPA) to ensure compliance and facilitate approvals/closures. Evaluate and select remedial technologies (e.g., in-situ chemical oxidation, dual-phase extraction, biosparging). Manage subcontractors, field personnel, and drilling teams during fieldwork. Mentor junior geologists and field staff. Ensure health and safety compliance in field operations (HAZWOPER 40-hour certification required). Support business development through proposals, scopes of work, and client communications. Essential Functions Ensure all scientific/engineering work adheres to professional standards and good scientific practice. Lead project planning, preliminary design studies, and layouts. Consult with clients and stakeholders to determine practical, cost-effective solutions. Select suitable materials, equipment, and methods in accordance with SOPs. Prepare cost estimates, schedules, and specifications. Produce clear, concise technical reports that meet applicable codes and regulations. Organize and direct the work of others to optimize resources and budgets. Supervise, check, and assume responsibility for assigned project work. Coordinate across disciplines (engineering, architecture, estimating, purchasing, etc.). Deliver projects on schedule and within budget. Prepare Phase I & II proposals, plans, and reports; conduct stormwater compliance inspections (NPDES, SWPPPs, SPCC Plans). Perform or oversee field sampling and supervise technicians and junior staff. Support marketing and business development, including project write-ups and resume updates. Follow company policies, procedures, and safety requirements. Other Responsibilities Participate in professional societies and industry activities. Maintain regular and reliable attendance. Perform other duties as assigned. Minimum Requirements Education: BS or MS in Environmental Science, Geology, Hydrogeology, or related field. Experience: Minimum of 10 years in environmental consulting or state/federal environmental regulatory work. Professional Credentials: Alabama Professional Geologist license preferred (or ability to obtain via reciprocity). Professional Engineer registration in Alabama is a plus. Technical Skills: Proficiency in interpreting geologic formations and groundwater data. Knowledge of UST regulations, RCRA, CERCLA, NPDES permitting, and the Clean Water Act. Strong technical writing, data analysis, and communication skills. Other: Valid driver's license; willingness to travel to project sites. Physical Requirements Willingness to work flexible schedules and overtime as needed. Ability to operate a computer and sit for extended periods. Ability to bend, file, and perform inspections/sampling over varied terrain. Strong verbal and written communication skills.

Thompson Engineering is currently seeking a Construction Engineering & Inspection (CEI) Project Manager for the Quality Acceptance Team on the West Alabama Highway Design Build Project. This progressive design-build project includes the widening of rural highways 43 and 69 from two lanes to a four-lane divided highway as well as the addition of new bypasses along the 74-mile route from Thomasville to Tuscaloosa, Alabama. Along with the widening and bypass construction, the project will involve construction of 23 new bridges, drainage, land clearing and grubbing, relocation of utilities, and the installation of over 100 box culverts. The project will be divided into 13 segments, each averaging 5.7 miles in length. The Project Manager will support as the point of contact between the Design Build/Quality Acceptance Team and the Owner Verification Team on one or multiple segments of the project. Key Responsibilities * Coordinate and supervise quality acceptance inspection staff performing field inspections, observations and testing of contractor activities to verify compliance with project plans, specifications, technical provisions and procedures. * Direct and assign inspection and testing tasks to field staff to meet minimum requirements for the project. * Notify Contractor and Owner of nonconformances and assist in corrective action plan. * Represents Thompson Engineering and interacts in a professional manner with client, teaming partner firms and contractor representatives. * Understands, applies and oversees safety requirements in the field. Skills / Qualifications: * Ten years of experience in construction inspection, surveying or highway materials testing or * Five years of the above experience with a Bachelor of Science degree in Civil Engineering or * Registered Professional Engineer with construction engineering and inspection experience About Us Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job DescriptionConstruction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities Perform field testing of construction materials using a 40-pound nuclear density gauge Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders Conduct concrete testing and transport samples to the laboratory for further analysis Collect, document, and deliver soil samples from job sites to the laboratory Observe construction activities and accurately record performance data Perform visual inspections of reinforcing steel (rebar) Maintain detailed daily field diaries documenting project activities Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications Ensure quality and quantity standards are met on all assigned work Proactively review project documents and testing procedures to understand technical requirements Communicate professionally and ethically with clients, contractors, and team members Maintain company-owned equipment in safe, proper working condition Report any required corrective actions to the Team Leader to ensure work quality meets company standards Follow all written procedures, company policies, and safety requirements Complete field activities and reports accurately and in a timely manner Perform all duties in a professional, ethical manner Additional Responsibilities Establish personal goals for continuous improvement and job performance Maintain reliable, punctual, and regular attendance Attend and actively participate in safety meetings and training programs Perform other duties as assigned QualificationsMinimum Requirements High school diploma or equivalent Minimum of six (6) months of construction materials testing experience ACI Level I Certification (or ability to obtain) Nuclear Gauge Certification Ability to communicate effectively both verbally and in writing Valid driver's license Ability to read and write in English Willingness to travel to various job sites as required Level and compensation commensurate with experience Physical Requirements Ability to work flexible schedules and overtime as required by operational needs Ability to lift and carry a minimum of 50 pounds Ability to safely operate a company vehicle Ability to push or pull up to 400 pounds using a wheelbarrow Ability to walk, stoop, bend, climb stairs and ladders Ability to work on uneven terrain including concrete, gravel, dirt, and grass Ability to work at elevated heights and in open structures Ability to work outdoors for extended periods in varying weather conditions Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.

Thompson Engineering is looking for a structural Autocad / REVIT Designer to join our team. The Structural Designer I & II is an entry level position up through 5 years of professional work experience. The Designer works closely with Structural Engineers and Architects to perform structural drafting assignments in either Autocad or REVIT. The position requires learning Thompson Engineering's drafting standards and procedures for projects involving buildings, coastal piers and bulkheads, industrial support structures, deep foundations, and other similar structures. The Designer should be well organized, have good verbal communication and problem-solving skills, and have a strong aptitude for follow-through. Essential Functions of the Position Capable of adhering to existing drafting standards and utilizing them properly. Knowledgeable in the operation of Autocad and REVIT software. Able to effectively work both independently and as a part of a larger team, on multiple, short-duration assignments or on single, large, multi-discipline projects. Able to manage the pressures associated with fast-paced environments, critical design tolerances, and tight schedules. Able to adapt his/her schedule to meet needs as they arise (i.e., able to occasionally come in early or stay late to respond to a client's last-minute request). Provide input to the engineer for the resolution of queries from clients or third parties. Must follow company policies and procedures regarding safety and quality. Make occasional field site visits to collect existing structure data and/or dimensions. Minimum Requirements Associates Degree in CAD/Drafting or equivalent preferred, and 0 - 5 years' experience in structural drafting of commercial and/or industrial projects. Must have practicable and verifiable knowledge of AutoCAD and REVIT software. Capable of adhering to existing Drafting/Quality standards and utilizing them properly. The ability to make geometric mathematical computations accurately. The ability to express ideas clearly and concisely, both orally and in writing. Physical Requirements Must be willing to work overtime as needed by the department needs. We estimate 40 hours per week with limited overtime expected. Must be able to operate a computer and sit for long periods of time. Ability to work in the field or outside, able to bend, stoop and climb. About Us: Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Thompson Engineering is looking for a CEI Inspector in the Tuscaloosa, AL area. CEI Inspectors follow standard procedures in documenting construction projects and inspecting job activities to verify they are in compliance with project plans and specifications. The inspector will be responsible for completing a daily report documenting the labor and equipment used by the contractor to include a description of the work performed and any pertinent conversations with the contractor. The inspector will assist with office work such as plotting cross-sections and computing earthwork quantities. The inspector will report directly to the Senior Inspector and/or the Project Manager. DUTIES 1. Inspect work in progress to ensure conformance with plans and specifications. 2. Inspect workmanship of finished installations for conformity to standards. 3. Maintains required reports of construction inspection activities. 4. Prepares sketches of construction installations that deviate from plans and incorporates changes into master plans. 5. Inspects and test materials incorporated into the project. 6. Drive company vehicle safely to and from worksites 7. Maintains required reports of construction inspection activities. 8. Conduct all work activities in compliance with Thompson Holdings, Inc. Health, Safety & Environmental Management System, safety policies & procedures, safety execution plans and Job Safety and Environmental Analyses. 9. Attend and pro-actively participate in monthly safety meetings, project toolbox safety meetings and safety moments. 10. Ensures regular and on time attendance. 11. Other duties as required. QUALIFICATIONS Minimum Requirements 1. High school diploma or equivalent 2. Valid Driver's License 3. Intermediate math and geometry skills in order to calculate areas, volume, etc. 4. Background in survey preferred Physical Requirements 1. Ability to work in the outside elements of the field up to 100% of the time 2. Must be able to lift a minimum of 50lbs 3. Required to remain standing for a minimum of eight (8) hours per day 4. Must be able to bend, stoop and climb on a ladder 5. Must be able to communicate verbally and in writing 6. Must be able to drive a company vehicle to and from work sites. 7. Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel About Us: Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, and construction inspection and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet literally performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. We are often the first company on project sites conducting environmental assessments, land surveys, and geotechnical studies. And our project management and construction management services often mean we are the last ones to leave. We are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Watermark Design Group is seeking a highly experienced and accomplished Senior Architect with a minimum of 10 years of experience to lead complex architectural projects from conceptual design through construction administration. This role combines exceptional design and technical expertise with strong leadership capabilities and a proven track record of successful project delivery. You will collaborate closely with clients to define project vision and scope, while mentoring and guiding junior team members. This position offers the opportunity to influence firm-wide best practices, ensure technical excellence, and drive client satisfaction. Key Responsibilities * Lead and manage architectural design for complex commercial, industrial, and municipal projects. * Collaborate with multidisciplinary teams to deliver high-quality, innovative solutions. * Mentor and guide junior staff to foster professional development and growth. * Manage client relationships, project budgets, and schedules to ensure successful outcomes. * Oversee construction documentation and administration, ensuring adherence to quality standards. * Promote a culture of technical excellence, efficiency, and best practices across the firm. Required Skills and Qualifications * Extensive architectural expertise across commercial, industrial, and municipal applications. * Strong technical proficiency with Revit, AutoCAD, and other relevant software. * Proven project management experience, including managing budgets, schedules, and client expectations. * Demonstrated leadership, team-building, and strategic thinking abilities. * Excellent communication, negotiation, and client relationship skills. * In-depth knowledge of building codes, regulations, and industry standards. * Strong attention to detail and commitment to delivering high-quality work. Education and Experience * Bachelor's or Master's degree in Architecture from an accredited institution. * Minimum of 10 years of experience as a Licensed Architect. * Licensure in the State of Alabama is required, with the ability to obtain licenses in other states where Watermark practices.

Thompson Engineering is seeking a Construction Engineering & Inspection (CEI) Inspector to join our Quality Acceptance Team on the West Alabama Highway Design-Build Project. This large-scale, progressive design-build project involves widening Highways 43 and 69 from two lanes to a four-lane divided highway, along with the addition of new bypasses spanning a 74-mile route from Thomasville to Tuscaloosa, Alabama. The project scope includes: Construction of 23 new bridges Drainage and utility relocation Land clearing and grubbing Installation of 100+ box culverts Division into 13 segments, each averaging 5.7 miles in length The CEI Inspector will report directly to the Project Manager and may oversee one or multiple project segments. Key Responsibilities Perform field inspections, observations, and materials testing to ensure contractor compliance with project plans, specifications, and technical provisions. Maintain accurate and detailed reports of construction activities. Identify and report nonconformances in contractor work to the Project Manager. Represent Thompson Engineering in a professional manner when interacting with clients, partner firms, and contractors. Consistently apply and promote safety standards in all field activities. Skills & Qualifications High School diploma or equivalent (required) Roadway construction or survey experience preferred Valid driver's license Ability to work outdoors in varying field conditions About Thompson Engineering Founded in 1953, Thompson Engineering began by providing quality assurance for construction projects supporting industrial, infrastructure, and community development. From our roots in materials testing, construction inspection, and environmental services, we have grown into a trusted leader across the Gulf Coast and Southeast. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation lines. Our teams support clients in the industrial, commercial, transportation, federal, and municipal sectors. We deliver end-to-end solutions-from environmental assessments and geotechnical studies to design, project management, and construction oversight. Our comprehensive approach ensures projects are completed safely, efficiently, and to the highest standards of quality. Equal Opportunity Statement Thompson Engineering and Watermark Design Group are Equal Opportunity Employers (M/F/D/V). Pre-employment drug screening and motor vehicle record checks are required.

Job Description ────────────────────────────────────────────────────────── Thompson Engineering is seeking a skilled and motivated Transportation Engineer with 5-10 years of experience to join our growing transportation design team in our Tuscaloosa, AL office. The ideal candidate will have a solid background in roadway and transportation design and will play a key role in supporting and leading projects from concept through construction. KEY RESPONSIBILITIES ────────────────────────────────────────────────────────── • Prepare roadway and transportation designs, plans, and specifications using OpenRoads Designer or AutoCAD Civil 3D. • Support and lead design efforts for municipal, state DOT, and private transportation projects. • Coordinate with multidisciplinary teams including survey, environmental, and structural staff. • Develop project deliverables including cost estimates, quantities, and design reports. • Serve as a task leader or project engineer on complex assignments. • Assist with client coordination, project management, and mentoring of junior engineers or designers. QUALIFICATIONS ────────────────────────────────────────────────────────── • Bachelor's degree in Civil Engineering. • 5-10 years of professional experience in transportation or roadway design. • Proficiency with OpenRoads Designer or Civil 3D is preferred. • Professional Engineer (PE) license preferred (not required for consideration). • Strong communication, organization, and problem-solving skills. • Ability to work collaboratively in a team environment and manage multiple priorities.

For six decades Garver has designed projects for more than 250 aviation clients. Garver understands the complexities of airport systems held together by runways, roadways, facilities, and electrical systems that need to work in tandem to accommodate daily needs for travel and transport. Garver's Aviation Team maintains a diverse, skilled design team dedicated to providing the expertise and leadership to assist our clients in meeting both current and future needs. Garver's Birmingham, Alabama office is looking for a project manager to join our diverse, skilled team. Aviation project managers are responsible for development of infrastructure supporting airports including site design, grading, drainage, utilities, sanitary sewer, roadway, electrical, and pavement design with emphasis on critical airport infrastructure such as runways, taxiway and aprons. Our aviation project managers oversee these projects from inception, through design, bidding, construction, all the way to closeout. Responsibilities for this role include: Project management of aviation design projects for commercial service and general aviation airports Drafting project specifications and contract documents Construction administration and oversite for aviation clients Collaborate and coordinate with multi-disciple design engineers and technicians Coordination with subconsultants Design projects with AutoCAD, Civil 3D, and aviation specialty programs Provide outstanding client service Requirements Bachelor's degree in engineering from an ABET accredited program Licensed Professional Engineer 6+ years of experience in civil engineering, preferably with aviation project experience Responsive and consistent in communications Proficient in design software packages such as AutoCAD, Civil 3D, aviation specialty programs Travel will be required with occasional overnight stays. Preferred Skills Previous experience working with a multi-disciplined team while overseeing project execution Experience in managing construction projects at airports Licensed pilot or other aviation-related experience Grow With Us Garver offers its employees programs such as company-paid professional memberships, company support for industry licenses and continuing education opportunities that foster a progressive atmosphere. Garver provides the tools, resources, and environment to develop leaders, stimulate ideas, and accomplish projects. By offering highly competitive salary packages, attractive benefits, and a comprehensive wellness program; Garver walks the talk when it comes to work-life balance. Founded in 1919, Garver is an employee-owned engineering, planning, and environmental services firm focused on aviation, transportation, buildings, federal, water and wastewater services; surveying; advisory services; and construction engineering and inspection. In the top 100 of Engineering News-Record's Top 500 Design Firms list, with more than 1,400 employees, Garver provides an exceptional level of client service that reflects our people-first culture, which has achieved Zweig Group Best Firm to Work For Legacy Status. Learn how Garver invests in people and places they call home at GarverUSA.com. Garver is committed to providing equal employment opportunities to all applicants and employees. Our employment practices are based upon an individual's capabilities and qualifications without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other category protected by law. #LI-VR1