Inspector jobs in Youngstown, OH

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

We are excited to be adding a Certified Cargo Tank Inspector to the MAC Trailer Team. Our Certified Cargo Tank Welder utilizes and implements acquired knowledge, experience, and skill to perform Aluminum and Steel Mig & Tig Welding and mechanical tasks to produce and/or repair tanker trailers and tank trailer parts for the MAC Trailer Service company and its customers. This job offers opportunities for growth and training and a clean, safe work environment. Please note that shift hours are Mon - Fri 5am - 3pm with additional overtime. Wage Range: $28.00 - $35.00 Shift Premium: What we offer you: Competitive Pay Perfect Attendance Bonus Program Career Growth Opportunities Clean Manufacturing Environment On-site Wellness Clinic Referral Bonus Program Medical, Dental, and Vision Plans Employee Assistance Program Employer Paid Life Insurance Long-term and Short-term Disability Legal Planning Theft Protection Critical Illness Coverage Accident Coverage 401k with Match Vacation Time Paid Holidays Prescription Safety Glass and Safety Shoe Program Employee Engagement Events Philanthropy Efforts Master Trailer Builder Program:(WELDER, PAINTER, A&E TECHNICIANS, FAB, INSPECTOR, AND ASSEMBELER POSTINGS ONLY) Here at MAC Trailer, we pride ourselves on our people and rewarding their hard work. Our Master Trailer Builder program was built to recognize our employees on the shop floor that meet the following criteria: excellent attendance, years of service, mastery of technical skills, ability to train others, willingness to work overtime, and positive attitude. Master Trailer Builders get to enjoy benefits like quarterly bonuses, picture hung on the wall, and an assigned parking spot. Who we are: MAC Trailer is the nation's foremost manufacturer of dump, flatbed, and transfer trailers, straight truck bodies, dry bulk pneumatic tanks, and liquid tank trailers. The success of MAC Trailer can be attributed to a quality product built by quality people. This is why MAC Trailer invests in its people and facilities to create a safe, secure work environment with room for training and growth. If you're interested in being part of a diverse workforce in a supportive work environment, MAC Trailer is the place for you. What you will do: Summary Utilizes and implements acquired knowledge, experience, and skill to perform Aluminum and Steel Mig & Tig Welding and mechanical tasks to produce and/or repair tanker trailers and tank trailer parts for the MAC Trailer Service company and its customers. This job offers opportunities for growth and training and a clean, safe work environment. Essential Duties and Responsibilities Perform and abide by safety policies and procedures while welding and other related task assignments. Perform daily custom build/repair fit/up and welding assignments. Perform daily electrical repairs and diagnostics related to tank trailer repair and operations. Perform daily air systems repairs and diagnostics related to tank trailer repair and operations. Perform and review specification documentation and information related to assignments to ensure products are repaired to customer specifications and MAC Trailer Service quality Standards. Perform Mechanical tasks such as repairing or replacing necessary material, drilling holes in frame or body, installing reflective tape, replacing suspension(s) and repair, brake replacement or adjustment, utilizing various power tools to facilitate. Communicate issues of concern and any other pertinent information that affects the productive completion of quality products, schedule of products, and safety to inventory and production management. Perform assignment of work to contribute to material, parts and products produced according to MAC Trailer Service and MAC Trailer quality and quantity standards, while supporting a safe work environment Any other assigned duties Who you are: Qualifications, Education, and/or Experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Proficiency in Steel and Aluminum Mig and TIG Welding (must pass company-approved weld test and certification) High School graduate or GED required. Previous Fall Protection experience preferred. Ability to work from heights is required. Ability to display comprehension and understanding of Fall Protection training and requirements is required. Previous experience and training in permitted Confined Space is preferred. Ability to work in a permitted Confined Space is required. Ability to display comprehension and understanding of Confined Space training and requirements is required. Ability to maneuver self throughout tanker trailer product and safely evacuate a tanker trailer is required. Ability to interpret detailed drawings, prints, and written instructions is required. Ability to work in a fast-paced work environment is required. Ability to work alone or with a team is required. Ability to operate related tools and equipment safely is required. Ability to work assigned shift and/or extended shift hours is required. Demonstrated mechanical and electrical knowledge and repair abilities is preferred. Basic math skills are required. Ability to enter detailed written information is required. Example: Inspection documentation. Physical Demands Working in a manufacturing environment, maneuvering self throughout work area, product, equipment, fall protection devices, including may evacuate during emergency evacuation. Lifting up to 50 lbs. Will don and doff safety equipment (example respirators and fall protection) Will stand, walk, climb, balance, stoop, kneel, crouch or crawl. EEOC Disclaimer  MAC Trailer is an Equal Opportunity Employer. MAC Trailer does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. 

Why Join Us At Vallourec, we are seeking individuals whose passion and dedication match the strength and resilience of the steel we produce. As an NDT Inspector, you will ensure the integrity and quality of seamless steel tubes through advanced non-destructive testing methods. Your Day-to-Day Impact Inspect seamless steel tubes using Ultrasonic (UT), Magnetic Particle (MT), and Electromagnetic Inspection (EMI) methods to detect internal and external defects. Verify shift schedules and coordinate with previous and next shift Inspectors and Supervisors. Check equipment and workstation conditions, requesting maintenance when necessary. Review material specifications and instructions before inspection. Calibrate UT, MT, and EMI equipment per Vallourec procedures and customer requirements. Perform changeovers and sensor equalization for automated equipment based on pipe dimensions. Conduct manual and automated inspections, classify indications, and disposition material per procedures. Remove surface defects using grinding tools and verify dimensional tolerances after repair. Perform visual inspections of internal and external surfaces of pipes. Provide feedback to Supervisors and production teams to identify root causes of defects. Maintain workstation cleanliness and equipment conservation. Participate in company programs such as 5S, CIT, Maintenance, and Continuous Improvement groups. Determine sample sizes and frequencies for defect categorization and coordinate lab analysis. Collect NDT data, verify execution of Inspection Standard Work, and report deviations. Actively contribute to continuous improvement initiatives and suggest workflow enhancements What You Bring We're looking for candidates who are sharp, safety-focused, and ready to roll up their sleeves: High School Diploma or equivalent required; Engineering background or Technician certification preferred. Prefer NDT Level 1 or 2 certification in UT, EMI, and MPI. Ability to perform calculations involving second-degree equations, Snell's law, and electromagnetism formulas. Knowledge and promotion of occupational safety and environmental standards. Prefer at least one year of experience in OCTG - NDT and/or Quality. Experience as Quality auditor, Lab technician, or Inspector in threading or related manufacturing preferred. Strong analytical, problem-solving, and communication skills. Mechanical and electrical aptitude. Ability to work shifts, weekends, and holidays. What You'll Gain Get paid for what you know - and earn more as you learn more. Opportunities to work on cutting-edge equipment. A culture that values your input and celebrates improvement. Real growth potential in a stable, essential industry. Overtime opportunities. And Benefits that Include: Medical, Dental, and Vision Coverage. Company-Paid Life Insurance & Short/Long-Term Disability. Profit Sharing: Up to 4%. 401(k): Company match 4.5% with no vesting period. Paid Parental Leave (including adoptions). Paid Holidays: 10 days, plus 1 personal floating holiday. Paid Vacation Time. Discretionary Performance-Based Bonus Program. Tuition Reimbursement. Safety isn't negotiable, it's who we are. Every spark, every shift, and every decision is guided by a commitment that goes well beyond compliance. We don't cut corners; we set the standard. That means clear expectations, continuous training, and shared accountability at every level. Protecting our people is more than a priority, it's a promise we make to every colleague, every day.

Job Description Ergon - West Virginia, Inc. in Newell, WV currently has an opening for a Unit Inspector. The Unit Inspector is a support position in the Maintenance / Engineering Department. The Unit Inspector implements programs to improve the overall reliability of the refinery by utilizing up-to-date inspection techniques and other reliability technologies to predict and prevent failures before occurrence by recommending repairs or replacement of applicable equipment. We are a great company with great pay and great benefits. Ergon is a relationship-driven company that values each employee's willingness to learn and contribute to the team. We are family owned and we pride ourselves on maintaining a small company feel. Unit Inspector Qualifications A high school diploma or equivalent is required. Possess at least one of the following certifications (API 510, API 570, API 653, CWI). Minimum of three (3) years of visual inspection experience required. Working knowledge of non-destructive inspection techniques, API and ASME fabrication and inspection codes, welding, and basic metallurgy is required. Position requires successful completion of training requirements as outlined by the Asset Integrity Department. This includes the ability to attain certifications such as API, AMPP, and ASNT as required. Must be self-motivated with strong leadership, communication and organizational skills. Must be able to read and interpret engineering drawings and P&IDs. Computer competency and experience with Microsoft Office products is required. Experience with SAP and PCMS is desired. Must be willing to work occasional overtime, weekends, nights, and holidays in response to critical inspection needs and/or planned events. Must meet the qualifications and successfully obtain Transportation Worker Identification Credential (TWIC) card as outlined by the United States Department of Homeland Security. Unit Inspector Responsibilities Strives to develop good working relationships with all co-workers, customers and associates. Exemplifies high levels of moral and ethical standards and values. Serves as the primary contact for his/her area's pressure equipment/piping integrity issues for operations and maintenance. Leak or failure inspection of fixed equipment and process piping. Work with appropriate Ergon team members to determine the cause of failure. Develops, implements and maintains inspection plans, for on-line and out-of-service non-destructive examination (NDE)/ inspection of piping, tanks and equipment to predict and prevent equipment failures, based on equipment history, known or suspect damage mechanisms, and compliance requirements. Recommends and provides technical support for repairs, replacement or alteration of piping, storage tanks and equipment This includes the review and approval of repair plans and weld procedures for work performed by outside contractors. Development of repair plans in conjunction with Plant Support Engineers and the Fixed Equipment Reliability Engineer. Tracks inspection due dates and consolidates inspection requirements for the next scheduled outage for equipment in the assigned areas of responsibility to meet all regulatory and follow-up requirements. Periodically reports on the status of plant equipment, in the assigned areas of responsibility, to support collection of facility key performance indicators (KPIs) and other business information. Identifies any preventative tasks that would prevent the development of future mechanical integrity issues to plant equipment. Review and revise work procedures for Inspection, QA/QC, and other related matters. Contracts and coordinates efforts of engineering and inspection contractors as needed to fulfill inspection data acquisition, analysis, metallurgical consulting and other technical / labor support needs. Coordinates and documents all pre-service testing of new piping and equipment as necessary to meet all applicable codes, standards and procedures. Utilizes consistent formats for inspection and repair reports and verifies that all inspection and maintenance work is properly documented in plant equipment and inspection files/ folders, as well as the facility mechanical integrity software. Keeps abreast of the latest advances in technologies and techniques for inspection of refinery equipment and implements them into the inspection plans as warranted. Participate in the MOC work process to identify and resolve issues. Coordinates with process engineering, operations, maintenance and the EH&S group as to timing of required equipment inspections Applicants must submit a resume and cover letter with salary requirements to *********************. Must be able to pass a pre-employment drug screen and background check. A clean MVR is required. Ergon offers a competitive benefits package: 401(k) with company match, Health, Life, Dental, Paid Holidays, Vacation, Sick Leave, Tuition Assistance and Profit Sharing. Ergon - West Virginia, Inc. is an EEO/AAP employer. Employment offer contingent upon pre-employment drug test, background check, and MVR. Job Posted by ApplicantPro

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

Job Details Newton Falls, OH Full Time AfternoonsDescription TITLE: Quality Assurance Technician (Inspector) REPORTS TO: Quality Assurance Supervisor Qualifications: Hand dexterity, Math Skills, Ability to read, Physical ability to stand for 8.0 hours (3 hr. intervals), Must be able to lift up to 40 pounds as required, Ability to learn to use and become proficient with all required inspection equipment, Possess basic PC skills, 2 years prior experience with Quality Responsibilities: Roving audit of all presses a minimum of 2 times during the shift or as often as necessary to ensure production of quality parts. Tagging and logging of any rejected parts. Start-up inspection of all molds on your shift, to include labels, door sheets, and sample parts. Putting away first shots, last shots and sample books. Maintain the Quality Control work area in a neat and orderly fashion. Learn to use and become proficient in the use of all inspection equipment. Incoming Inspection when needed. Take photos of work stations as needed. Assist with Gage R&R's and Sample Inspection as needed. As well as assisting in gathering samples for photos to help establish quality standards for the sample books and expand all job related skills.

Heritage Truck Equipment in Hartville, Ohio is hiring a full-time Chassis Line Inspector. Benefits include 100% employer-paid medical insurance premiums, monthly attendance bonuses, 401K with company match and more! Full-time - First Shift - 50 hours/week Duties/Requirements: * Accurate measurement of manufactured equipment * Visual inspection of welds for quality and placement * Verifying that equipment is manufactured to written specs * Must have knowledge of Microsoft Word and Excel * Able to lift 50 pounds * Climb, kneel, stand/walk for long periods of time * One year of welding and production experience required Job Offers: * Full-time * First shift * 40 hours/week with possible overtime * Weekly pay * 100% employer paid medical insurance premiums. * Optional dental/vision insurance * 401K with company match * Paid Time Off * Paid Holidays * Monthly attendance bonus up to $5,100 in first year, up to $5,800 per year after first year) * $2,000 sign on bonus If you are looking to start a career with a company that has shown continuous growth over the last 20 years, offers competitive pay and amazing benefits, apply today and join our ever-growing team!

Lingo Staffing is Now Hiring for a Quality Control Inspector in Hartville, OH Hours: 1st Shift: 7:30am- 4pm ($15) 2nd Shift: 3:30pm-12:00am ($16/hr) Days: Monday-Friday Pay: $15/hr (1st shift) • $16/hr (2nd shift) Short Description: We are seeking reliable and detail-oriented Quality Control Inspectors for a fast-paced plastics manufacturing environment in Hartville, OH. QC Inspectors are responsible for performing first-piece inspections, monitoring in-process quality, completing documentation, auditing packaging, identifying defects, and ensuring all production meets LMT's established quality standards. Candidates must be comfortable working independently, communicating across shifts, and maintaining accuracy throughout the shift. Requirements: Minimum 1 year experience in manufacturing or similar environment (plastics preferred) High school diploma or GED Ability to inspect parts visually and identify defects (splay, burns, shorts, contamination, flash, etc.) Ability to complete inspection paperwork, production sheets, and documentation accurately Able to use scales, gauges, check fixtures, and basic testing tools Ability to read, compare, and verify first-piece samples Strong attention to detail and accuracy Ability to follow written and verbal instructions Good communication skills; able to communicate across shifts Must be dependable and able to work with minimal supervision Must be willing to comply with a national background check ? Physical Requirements: This position requires the ability to walk extended distances (approximately 2.5+ miles per day) and remain on your feet for the entire shift. Employees must be able to bend, twist, stand, stoop, and lift as part of daily duties, with or without reasonable accommodation. We Are Seeking Candidates Who Have Held the Job Titles of: Quality Inspector, Quality Assurance Technician, Manufacturing Inspector, Production Inspector, or Assembly Quality Checker #INDAKR

HMT has an immediate need for an API 653 certified Inspector to assist with performing inspections in accordance with API standards: Perform API 653 inspections per customer's scope of work and HMT's internal process and procedures Maintain a positive relationship between client, facility and customer Properly interpret regulations, codes and industry standards Ensure that all HMT safety policies and procedures are being followed Required Qualifications: Must hold API Certification and have API Inspection work experience. Must be technically competent and knowledgeable in the application of the current inspection codes. Preferred additional certifications: Current CPR & First Aid TWIC Card Current AOCF and or PMT III (DOT OQ) Respirator fit tested (current) Trained in OSHA 10 and or OSHA 30 JLG lift operator certification (may or may not be approved by HMT Safety Dept.) Current safety training (within the last 12 months) to include but not limited to confined space, fall protection, LOTO, HazCom, etc. About HMT: HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job Description FRANKLIN INDUSTRIES is looking to hire a Weights and Measures Inspector to its Quality team. This position is essential to the company's success by collaborating with the quality team, production departments, and other company stakeholders to ensure our customers receive a quality product. DUTIES AND RESPONSIBILITIES Back-up to Quality Manager for critical daily tasks and incidents Emergency Back-up for the Mill Inspector Ensure daily checks on scales are being performed and conduct annual calibrations Hold production managers responsible for preventive maintenance on the scales Ensure that all permits necessary for operating scales are maintained and posted as required Present for startup of daily mill operations, in conjunction with the Mill Inspector Direct and provide guidance to the Mill Inspector as needed. Responsible for inspecting material as it proceeds through the Mill and Shear processes Observe and maintain all tolerances on mill products Communicate potential problems to downstream production departments Report and document product dimensions Perform ISO Audits assigned Perform gage calibration to ANSI standards throughout the plant and document in Gage Tracker Database as needed Perform weekly physical properties testing (Tensile) Train Mill Inspector How to Perform Tensile Tests Inspect material for powder coating and galvanizing at least twice daily Inspect product samples before shipment to customers, complete certification of those samples, and ensure those samples truly represent the product line Provide feedback/findings to ensure proper adjustments and verify the effectiveness of the adjustments made Investigate and determine the amount and scope of nonconforming products in production departments Tag nonconforming material and notify Material Review Board (MRB) of occurrences Other duties as assigned EDUCATION AND EXPERIENCE High School diploma or equivalent is required Previous experience performing quality inspections throughout and after the production process is necessary Previous experience in completing certificates of conformance is necessary Formal training in product quality management is preferred Previous experience in a manufacturing environment, especially in a steel mill, would be a plus. SKILLS AND ABILITIES Must be a self-starter and be able to stay on-task with little-to-no supervision Must be able to communicate effectively and professionally, both in writing and verbally Must be able to work effectively in a team environment Must be able to perform basic arithmetic, geometry, and algebra at a proficient level, as it applies to practical applications in a manufacturing environment WORKING CONDITIONS This is a safety-sensitive position which requires the employee to work around and/or operate heavy machinery. This position will require the employee to work around moving mechanical parts and vibrations. This position will require the employee to be in the presence of fumes, gasses, fluids, and chemicals. PPE, including but not limited to: hard hat, safety glasses, hearing protection, steel toe boots, and gloves are required to perform this job. PHYSICAL REQUIREMENTS The employee in this position is required to perform the following tasks either with or without (a) reasonable accommodation(s) as defined by the ADA: Must be able to sit, stand, and walk for extended periods of time Must be able to bend, crouch, and kneel at times Must be able to climb onto and off of equipment Must be able to lift: 5-50 lbs on a frequent basis and 50+ lbs on an occasional basis Must be able to use arms, wrists, hands, and/or fingers for various repetitive motions Must have good eye acuity, depth perception, and field of vision STARTING PAY - Between $18 and $26/hour, depending on experience. (OT is paid at 1.5x pay after 40 hours). New employees are eligible for merit raises and more cross training opportunities after passing their 90-day probationary period. The following incentives are also available: Bonus and production incentives Referral bonuses Paid holidays BENEFITS - available on the first of the month, following 60 days of employment Medical Insurance Dental Insurance Vision Insurance $15 K Life Insurance paid for by company Short and Long-Term Disability Insurances Other benefits also offered ABOUT FRANKLIN INDUSTRIES In 1901, Franklin Rolling Mill & Foundry Company was founded in Franklin, PA. Right in the middle of Steel Country, Franklin Industries is less than two hours from Pittsburgh, where Andrew Carnegie's steel empire ruled the steel industry in the early 20th century. We're another two hours from Johnstown, PA, where the first steel rails for the railroad (our raw material) were made. Steel rails linked Chicago and New York together with high-capacity rails creating America's manufacturing powerhouse. Our families have made an honest living in quality manufacturing for generations and are proud to continue that great tradition. NON-DISCRIMINATION STATEMENT It is the policy of Franklin Industries to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information, or any other protected characteristic under applicable law. The HR Department is required to check the criminal background of all job offerees. Having a criminal record does not block an applicant from securing a job at Franklin Industries. We review all criminal records on a case-by-case basis. The HR Department sends all job offerees to an external testing site for a physical (vitals, vision, and hearing) and a drug screen. Securing the job is contingent on passing the physical and the drug screen.

GIS Field Services, Inc. has been in the mortgage field inspection industry for over 20 years and is based out of Dallas, TX. We are looking to hire Mortgage Occupancy Field Inspectors to perform residential property inspections on behalf of mortgage lenders. Our independent contractors enjoy a flexible schedule while earning weekly pay. Please visit our website to learn more about us and the industry. ************************ Job Title: Mortgage Occupancy Field Inspector County Coverage: Beaver Mortgage Property Inspection Overview: Mortgage lenders require periodic updates on the properties they have financial interest in. The lender contracts with GIS to have inspectors go out to verify the property occupancy, report general property conditions, letter delivery/posting, vacant interior walk-through or insurance repair progress report. Majority of our inspections are basic exteriors where some do require contact by door knock or letter delivery. In addition, there will be some inspections which require interior access to secured/vacant properties and appointment-based insurance loss inspections. Job Responsibilities: Requires being able to spend extended periods of time driving Efficient time management to route and complete inspections with an estimated 3-5 day turnaround time (this can vary) in your agreed territory Make a determination of occupancy based on industry standards and report general property conditions Using a mobile app, InspectorADE, to obtain all photographs, comments, and form documentation Consistent communication with your inspection manager via text, email and phone Requirements: Experience preferred, not required Complete a background check using a valid driver's license to obtain a Shield ID (Aspen Grove ABC#) - If onboarded with GIS, we will provide you the link to obtain your Shield ID Computer and internet connection Vehicle with good gas mileage iPhone or Android Printer Volt Stick Set of 11 Hud Keys (Inspector Keys) - If onboarded with GIS, we will provide a link with a discount code to obtain your Hud Keys Daylight availability Office supplies (paper, envelopes, ink) Pay: Set rate per inspection ($15-$20 per hour based on location and the number of inspections performed) Payment - inspections are paid out every Friday for work completed and approved the prior week by direct deposit This is a 1099 Independent Contractor position

A Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects or deviations from quality requirements. Quality Inspectors use various tools and techniques to measure and evaluate the quality of materials, components, and finished products. They document and report any non-conformities and work closely with production teams to address quality issues and implement corrective actions. Additionally, they may participate in the development and improvement of quality control processes and procedures. Supervision: Essential Responsibilities Perform visual, mechanical and electrical inspections, and testing of all equipment manufactured at Powell facilities according to Powell Standards. Program and operate electronic equipment such as microprocessor-based relays. Energize Powell electrical products and other buyout equipment such as service Panels, HVAC, Battery Chargers, UPS System, etc. Perform equipment failure investigations and root cause analysis. Complete and maintain all test Quality Control documentation as required. Perform maintenance on test equipment as needed. Perform tests using equipment such as multi meter, clamp-on-meter, voltage detector, Hi-Pot, etc. Interaction with all departments (shop, engineering, sales, shipping, fabrication, PCR, switchgear) including customers to work to resolve quality related issues. Interaction with all departments during production, final inspection and final release to shipping is required. External relationships may include regular interaction with other Powell subsidiaries, suppliers and customers. Record Engineering and Shop discrepancies, non-conformities and material shortages utilizing Powell systems. Participates in continuous improvement projects. Promote a safety culture as well as attend all safety meetings. Ensure quality by following standard work instructions and identifying any potential risks to product quality. Ensure that work areas remain clean and well organized. Learn and understand basic electrical principals and relevant Mechanical experience. Minimum Qualifications High School Diploma or General Education Diploma, or a Trade School diploma or certificate Minimum 1-3 years' experience in manufacturing environment. Ability to read prints including specification sheets, wiring diagrams, schematics, three-line drawings, wiring lists and part drawings. Preferred Qualifications Experience in Quality inspection for electrical or electronic equipment or components preferred Intermediate experience working with industry codes and standards and able to refer to applicable codes. Skills, Abilities & Other Requirements Ability to apply industry standards as applicable to job and product. Actively seeks out self-development through internal or external programs that contributes to knowledge, skill and abilities. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within a team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Must be proficient in the English language, both written and verbal. Working & Environmental Conditions Working Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. Required to always wear personnel protective equipment (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required. Working at a desk and computer in an office environment is required. Must be able to work from all types of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding. Working at heights usually no higher than 30 feet in the air or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously. Continuous standing, walking 50-300-foot distances for long periods of time with only occasional sitting. Must be able to climb stairs frequently throughout the shift. Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently. Using upper extremities to apply or exert a force continuously up to 50lbs. Ability to use hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time with frequent repetition. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.

* Conduct precise visual and dimensional inspections of incoming, in-process and finished parts using a variety of measuring tools and gauges, including calipers, micrometers, height gauges * Read and interpret technical drawings, blueprints, and specifications to verify part dimensions and ensure compliance with customer or industry standards. * Accurately document inspection results, including measurements, deviations, and findings, and maintain detailed inspection records for quality assurance and traceability. * Identify and report any non-conformities or deviations from specifications to the quality team and production staff. Work with engineering and production to recommend corrective actions. * Work closely with the quality assurance, engineering, and production teams to troubleshoot quality issues and ensure the highest level of product quality. * Ability to understand and identify Emtek's approved finishes. * Ability to follow Emtek's safety policies and practices

Job Description INSPECTION/FEED ASSOCIATE JOB TYPE AND CLASSIFICATION: Full Time Hourly Non-Exempt MAC.BID buys truckloads of customer returns and overstock products then sells these items individually to the public through online auctions. The inspection/feed associate prepares and positions the product for the Scan Team. This position reports to the Scan or Big Box Scan Team Lead. MAJOR DUTIES AND RESPONSIBILITIES: Inspect inbound products for obvious defects Categorize each product as Like New, Open Box, or Damaged Test electronics at a basic level to assess general condition Move products to the conveyor for the scanners to process Perform other tasks as assigned by management QUALIFICATIONS: Must be available to work onsite Monday - Friday for 8 hours with a half-hour lunch break, hours to be determined by workload and General Manager Must be able to lift 25 pounds alone, 50 pounds with a team lift Must be able to stand and walk for hours at a time Must be tech savvy Must be able to follow written directions and company policies Must have a High School Diploma or equivalent BENEFITS: Healthcare after 60 days of employment Weekly paychecks Employee credit each week to bid on our items after 60 days of employment 401(k) with employer match after 90 days of employment Employee Referral Program 5 days PTO after 90 days of employment MAC.BID is an equal-opportunity workplace. We will consider all qualified applicants for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other basis protected by applicable law. #MACSL Mon-Fri 8:30am-5pm

Job Description Job Title: First Article Inspector Department: Quality Reports to: Quality Manager Responsible for assuring the First Article Inspections are completed on-time and are producing desired results according to customer specified requirements and customer provided drawings. Responsible for assembling PPAP packages. Relationships: Please see PTR's Organizational Chart included in you new hire paperwork for specific relationships. Authority: This individual has authority over no other employee but may ask others within their department to help them with tasks. Please see PTR's organizational chart for more detailed information. Essential Functions: Provide technical and process support to engineering, manufacturing, sales and purchasing groups. First Article Inspection of plastic components. Creation of reports from First Article Inspection according to customer specific requirements. Operation and/or programming of CMM equipment ( Hexagon Measuring Machine; PC DMIS Software). Annual validations of all production parts according to Customer Specific requirements. Assist with corrective and preventive actions. Hands on interaction with manufacturing process control activities. Assist in creating and revising controlled forms. Assist with the measurements of in-process critical dimensions. PPAP package preparation Other duties as assigned by Quality Manager. Arriving at work on time for every scheduled shift. Maintain a clean and safe work area at all times ** other projects and responsibilities may be added at the company's discretion. Preferred Qualifications: 1 year of metrology experience or equivalent Ability to interpret part drawings and tolerances. Knowledge and use of Various inspection tools such as micrometers and calipers Some knowledge of ISO or IAFT 16949 PPAP knwledge Knowledge of SPC and calibration systems Plastic Mold Injection industry and testing experience desirable Knowledge of PC DMIS Software. Detail oriented. Must be able to work independently; some decision makin skills may be required PC Skilss (MS Office suite- word, excel, ect.)

ERM is hiring Inspectors to perform inspections of water service lines, and work in field teams of two to determine the service line material. Work will occur in properties in Pittsburgh, Sharon, and New Castle, PA; and Youngstown, OH and the surrounding areas. The projects we work on and the services we provide demand teams of multi-disciplinary professionals working collaboratively to meet our clients' needs. The role of an Inspector working within this program requires the use of multiple methods to perform detailed inspections of customer-side water service lines to identify the service line material. This is a part-time (20 hours/bi-weekly), limited-term role for the duration of 6 months, renewable. RESPONSIBILITIES: Conducting field inspections to determine water service line material. Interacting with, and serving as a point of contact for ERM with landowners, contractors, clients, and other project team members. Reviewing and implementing project documents and data entry. Providing technical leadership, support, and direction to field staff. This includes the coordination of daily inspections, schedules, and meetings. Distributing water sampling test kits and contracts to landowners, as needed. Documenting service line material findings by preparing daily written inspection reports that provide up-to-date, consistent written and photo documentation of activities observed in the field. Participating in various meetings. Performing additional tasks as assigned or required. REQUIREMENTS: High School Diploma, GED, or equivalent. A basic understanding of building construction and the ability to locate a water meter/shutoff is preferred but not required. Necessary training will be provided. Strong oral and written communication skills. Proficient technical skills, including, but not limited to, experience using Microsoft Office programs, digital cameras, and other handheld data collection devices. The ability to travel on temporary assignments with short notice, Must possess a valid Driver's License. Must be able to comply with ERM health and safety procedures, Must have a good driving record. Who We Are: As the largest global pure play sustainability consultancy, we partner with the world's leading organizations, creating innovative solutions to sustainability challenges and unlocking commercial opportunities that meet the needs of today while preserving opportunity for future generations. At ERM we know that creating a diverse, equitable and inclusive work environment is an essential part of making our company a great place to build a career. We also see our diversity as a strength that helps us create better solutions for our clients. Our diverse team of world-class experts supports clients across the breadth of their organizations to operationalize sustainability, underpinned by our deep technical expertise in addressing their environmental, health, safety, risk and social issues. We call this capability our “boots to boardroom” approach for its comprehensive service model that allows ERM to develop strategic and technical solutions that advance objectives on the ground or at the executive level. Please submit your resume and brief cover letter. Based on review of these responses, shortlisted candidates will be invited for interviews. ERM does not accept recruiting agency resumes. Please do not forward resumes to our jobs alias, ERM employees or any other company location. ERM is not responsible for any fees related to unsolicited resumes. ERM is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, gender identity, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Thank you for your interest in ERM!

RAIL & TRANSIT PRACTICE Whether moving people or freight, future rail and transit solutions will be determined by energy prices, a shift toward urban living and growing environmental concerns. Michael Baker helps freight, authority and state Department of Transportation clients meet these modern challenges by providing services that address key industry issues such as state of good repair, capacity, safety, community livability, asset management and maintenance, planning and development for new projects, and the promotion of environmental stewardship and sustainability. We provide value by first understanding our clients' needs, then working with them as a partner to identify innovative and cost-effective solutions that optimize their opportunities for success. DESCRIPTION Join our talent pool! Michael Baker International is taking applications for Rail Inspectors to work on projects in various locations. Our Rail Inspectors monitor and inspect construction methods and workmanship to ensure the quality relating to building railroad, bridges, structures, and associated civil operations in accordance with plans and specifications. In this role you will document findings including contractor construction materials, quantities, personnel, site conditions, safety, etc. General project locations may include Harrisburg, PA, Maryland, Northern/Southern VA, Chicago, IL, or Brunswick, MO, as well as other various locations around the US depending on the project. Project locations will vary based on project needs. If you would like to be considered for a future project, please submit your application to join our talent pool and we will contact you if a project comes available that matches your experience. As a Rail Inspector, you will be expected to: Report to work at the project location to which individual has been assigned. This may require travel to assigned location if it is not local to reporting office. Review plans and specifications associated with assigned work on active construction contracts. Notify project engineer or project supervisor of apparent constructability issues or errors in plans. Monitor work on construction projects including quality, schedule, costs, and safety for compliance with the contract requirements and document all findings, observations, and issues. Oversee daily operations of contractor and/or subcontractor personnel to ensure that work is being performed in accordance with plans and specifications. Answer basic contractor questions about plan and specification requirements. Identify contractor means and methods that are inconsistent with plans and specifications and discuss needed changes with the contractor as well as the project engineer or project supervisor. Make measurements and observations of work being performed to ensure accurate quantities are tracked for completed work. Prepare detailed field drawings or electronic templates to support the calculations being used to justify the pay quantities. Utilize eConstruction tools including tablets and client documentation software. Photo Document all project activities. Willingness to work as needed to satisfy project requirements (i.e., nights, weekends, extended shifts, etc.). PROFESSIONAL REQUIREMENTS HS Diploma or GED 5+ years of prior experience in construction inspection for rail including and/or civil related work items Ability to pass a background check along with valid state driver's license. Good interpersonal, communication, and conceptual thinking skills. Ability to lift up to 50 pounds. Ability to work independently for periods of time. Attention to detail and effective decision making and organizational skills. Experience in Microsoft Office (Outlook Word, Excel, and PowerPoint). Ability to prepare and maintain records, prepare reports, documents and correspondence related to the work. On-track safety training and/or ability to obtain RWP certification COMPENSATION The approximate compensation range for this position is $25- $35 per hour. This compensation range is a good faith estimate for the position at the time of posting. Actual compensation is dependent upon factors such as education, qualifications, experience, skillset, and physical work location. BENEFITS We offer a comprehensive benefits package including: Medical, dental, vision insurance 401k Retirement Plan Health Savings Account (HSA) Flexible Spending Account (FSA) Life, AD&D, short-term, and long-term disability Professional and personal development Generous paid time off Commuter and wellness benefits

Company Overview: Champion Personnel is currently seeking experienced Final Inspectors for our client located in Streetsboro, Ohio. Our client designs and manufactures best-in-class power quality products including Static Transfer Switches, Power Distribution Units and Remote Power Panels. Position Overview: A Final Inspector will be responsible for ensuring products leaving the facility have met all quality standards. Responsibilities: Follow 3D model to install final parts (i.e. cover panels, labels, etc.) on power cabinets Use standard hand tools (i.e. drill, wrench, screwdrivers, etc.) to complete tasks assigned Clean all power cabinets, inside and outside before they are shipped to customers. Check all computer documentation of prior departments for accuracy. Adhere to safety protocols and maintain clean and organized work area. Assist in other tasks in the Staging Department as needed. Requirements: Basic knowledge of standard hand tools (i.e. drill, wrench, screwdrivers, etc.) Basic computer skills (i.e. web browser, email) Strong organizational and time management skills Attention to detail and ability to accurately verify and label materials Ability to work in fast-paced environment Handle multiple tasks simultaneously Previous experience in final inspection, material handling, or warehouse operations Communication skills Problem solving and critical thinking skills Physical Requirements: Must be able to lift up to 25 pounds Ability to stand for an extended period of time Must be able to bend, squat, kneel, or climb a stepladder while working Manual dexterity and good hand-eye coordination Additional Details: Shifts available: 1st- 6am to 2:30pm M-F, 2nd- 2pm to 12:30am M-Thurs Starting pay is based on experience. $20-21 per hour. Company offers 100% paid medical benefits Equal Opportunity Employer Statement: We are an Equal Opportunity Employer and do not discriminate based on race, ancestry, national origin, color, religion, sex, age, marital status, sexual orientation, disability, veteran status, or any other protected classification under the law.

Job Description Job Title: Quality Control Inspector - Coupling Line Department: Quality - 17 Church Street Reports To: Director of Quality Assurance / Quality Control Manager / Quality Control Lead / Production Manager Revised: 1/17/19 SUMMARY: This position is responsible for assuring the organization's quality system activities are producing desireresults and to assure manufactured products (couplings) meet customer requirements. Must have the ability to solve practical problems and deal with a variety of concentric variables in situations where limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral and/or schedule format. AUTHORITY: This individual has authority over no other employee but may ask others within the department assigned to assist them with tasks. Please see ACC organizational chart for more detailed information. ESSENTIAL FUNCTIONS (include but are not limited to):  Provide technical and process support to engineering, manufacturing, sales and purchasing groups  Assist with calibration system  Assist with corrective and preventive actions  Assist with audits and continually improve the API Quality Management System  Hands on interaction with manufacturing process control activities - dimensional and visual inspection, record keeping and/or magnetic particle inspection (MPI). NDT training and/or certification required for MPI  Maintain a clean and safe work area  Other duties as assigned by Quality Control Lead or Quality Control Manager  Arriving at work on time for every scheduled shift PREFERRED QUALIFICATIONS:  Associates degree or equivalent experience  Ability to read and interpret documents such as safety rules, work instructions, and procedures  Ability to write routine daily reports and correspondence as necessary and to request additional support as needed  Ability to communicate with all levels of the organization  Ability to add, subtract, multiply, divide, and average in all units of measure, using whole numbers, common fractions, and decimals  Ability to interpret part drawings and tolerances  Knowledge and use of various inspection tools, including but not limited to bore, pitch, micrometers and caliper to ensure Quality Assurance specifications are met  Some knowledge of API, ISO 9001 quality systems  Some knowledge of SPC and calibration systems  Metals industry and/or testing experience desirable  Ability to enter data into a computer (MS Access, Word, Excel, etc.) 15 Church Street P.O. Box 107 Wheatland, PA 16161 F-JD042 Last Revised 1/17/19 *If candidates do not meet all of the above requirements, American Cap Company, LLC at its discretion can provide additional training in the appropriate areas for job qualification. CERTIFICATES, LICENSES, REGISTRATIONS: A valid Driver's License is required. STANDARDS OF PERFORMANCE: The employee will be expected to meet efficiency ratings of 85% or better after completion of mandatory training and have 0% defective parts. Efficiency ratings are posted on a monthly basis. PHYSICAL REQUIREMENTS: While performing the duties of this job, the associate is regularly required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. The associate frequently is required to sit, walk, stand, climb, balance, stoop, kneel, crouch, or crawl to support production needs. The associate must regularly lift and/or move up to 25 pounds and occasionally lift and/or move more than 45 pounds. Specific vision abilities required by this job include close vision, distant vision (with or without corrective lenses), color vision, and the ability to adjust focus as determined through passing a vision acuity test. WORK ENVIRONMENT:  Production paced operation to support customer (internal and external) demands.  Supporting production changes as needed. OTHER JOB REQUIREMENTS:  Must be 18 years of age or older.  Must have a high school diploma or GED equivalent.  Must maintain an orderly, clean and safe work area and properly are for Company and Customer property.