Keystone Automotive Operations jobs in Eastvale, CA

Warehouse Associate KBS is looking for motivated, high-energy Warehouse Associates (Corrugate Recycler) to join our team for immediate full-time, permanent positions. These positions are primarily responsible for meeting customer needs and exceeding customer expectations in the pick-up and removal of Corrugate Gondolas throughout the facility. APPLY TODAY! Kellermeyer Bergensons Services (KBS) is the largest privately held provider of facility services in North America, servicing over 2 billion square feet of space daily. We help industry leaders across a wide range of key verticals-including retail, industrial and logistics, healthcare, education, manufacturing, and more-maintain clean, efficient, and welcoming spaces that support their operations. As we continue to grow, we're looking for team members who are dedicated, reliable, and ready to contribute to a culture built on respect, opportunity, and pride in service. Work Schedule: Days/nights vary, including weekends Shifts Available: 6am-5pm 6pm-5am Our Warehouse Associate (Corrugate Recycler) position performs the following duties within designated work areas, as assigned at the beginning of each shift: Utilize a manual pallet jack to pick up full gondolas (large trash boxes/bins) and replace them with empty gondolas within assigned areas Transport and place full corrugate gondolas into the baler or compactors located in a designated area in the warehouse (training will be provided) Ensure the areas around all gondolas are free of debris and trash Dust, mop, and sweep around trash receptacle areas to keep traffic areas free of trash and debris Must keep traffic areas (“Green Mile” walking areas) free of debris at all times to ensure safety for all Maintain and sort in Auger/Baler/Compactor areas for tidiness Other janitorial duties may be assigned as needed Requirements for our Warehouse Associate / Corrugate Recycler Positions: Ability to use a manual pallet jack to lift and move gondolas up to 75+ lbs. Ability to lift, push, pull and carry objects weighing up to 50 pounds Regular bending, lifting, stretching, and reaching both below the waist and above the head Able to push and pull manual pallet jacks loaded with trash/cardboard consistently Walking in and around the facility with great frequency throughout the entire shift Must be able to stand and walk for up to 10-12 hours Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and safe handling for chemicals sheets/documents (generally in English; may have in Spanish where state required) Background Check and Drug Test Required KBS utilizes the KBSPresence mobile timekeeping software for accurate recording of employee work hours, attendance management, completion of required training, and distribution of important employment-related information. All non-exempt employees are required to download and use the KBSPresence app on their personal mobile devices to clock in and out for their shifts and breaks. In accordance with applicable local laws, cell phone reimbursement is provided to support the use of personal devices for work-related tasks. What's In It for You? As a full-time KBS employee (30+ hours per week) you qualify for benefits including medical, prescription drugs, dental, vision and more! Affordable Limited Medical Insurance (Coterie) which includes virtual access to US board-certified physicians who can consult, diagnose, and prescribe medications via interactive audio or video. Life Insurance Supplemental Health Insurance (E.G., Accident) 401k plan with a match Paid and Unpaid Time Off Quick Pay - voluntary benefit offered to both full-time and part-time KBS employees who are paid hourly via direct deposit. Quick Pay provides a way for employees to access a portion of their pay prior to the upcoming scheduled pay day. Pet Insurance PerkSpot Discount Program - discounts on travel, gyms, cell phones, restaurants, auto, apparel & electronics Progressive Pay is available at select site locations, though it is not offered at every location. Employees will receive a $.50 increase after the first 90 days, and another $.30 increase after completing 180 days. Check today if this is available to you. KBS considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity, and expression, marital or military status, or based on an individual's status in any group or class protected by applicable federal, state, or local law. KBS also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Responsibilities: Perform sales support to consistently meet overall area sales goals. Make regular sales calls on existing major accounts and establish contact with new accounts. Make effective customer presentations, proposal pricing is accurate and technically correct. This may include walk-through customer site, and field visits. Perform marketing support to promote the Company's image throughout the industry. Implement area-marketing plan on a monthly basis. Assist Corporate needs in new service assessments, marketing research and literature development. Perform public relations to promote sales. Active participation in trade shows and professional societies. Give effective presentations for the Company's Training Services and Speaker's Bureau. Member of the Area Management Committee. Actively participate as a committee member. Assist in the development of the area sales and marketing plan. Bring input and new ideas on Sales and Marketing activities. Competencies: To perform the job successfully, an individual should demonstrate the following competencies: Customer Focus- Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first-hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect. Drive for Results- Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom line oriented; steadfastly pushes self and others for results. Interpersonal Savvy - Relates well to all kinds of people, up, down and sideways, inside and outside the organization; builds appropriate rapport; listens; builds constructive and effective relationships; uses diplomacy and tact; truly values people; can diffuse tension. Listening- Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees. Negotiating- Can negotiate skillfully in tough situations with both internal and external groups; can settle differences with minimum noise; can win concessions without damaging relationships; can be both direct and forceful as well as diplomatic; gains trust quickly. Time Management- Uses his/her time effectively and efficiently; sets priorities; values time; separates the critical few from the trivial many and concentrates his/her efforts accordingly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb, and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds and frequently lift and/or move 100-pound test sets. Valid Driver's License. Education/Experience: Graduate engineer (BSEE/BSME) and no experience. OR Graduate of electrical technical school or equivalent, and five years of similar work. OR High school diploma or equivalent and eight years of similar work. Willing to work flexible hours, weekends, some overnight travel to cover sales territory. Regularly required to sit, stand, walk, use hands and fingers, talk and hear. Required to sit and work at computer. Specific vision abilities required by this job include close vision and the ability to adjust focus. Conduct walk-through of construction sites and work in and around electrical equipment. Valid Driver's License required. TRAVEL TIME REQUIRED Up to 75% within assigned territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1

We are seeking a Process Technician to support operations at a single manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure products remain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($53,381.00 - $80,071.00) Target Bonus: % Req ID: 27629 Job Responsibilities Job Requirements Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Employment Status: Hourly Full-Time Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Header Join the manufacturing team people don't want to leave. Work where you're valued - low turnover, high satisfaction! We strive to make work fun while meeting our customers' expectations with quality and safety as top priority. We offer a competitive benefits package that includes PTO, paid holidays, 401(k) matching, HSA, medical, dental, and vision insurance as well as tuition reimbursement and loan repayment programs. We also offer a pay progression scale that allows you to grow your knowledge and your pay! We pride ourselves on the tenure of our workforce. Come see why we are the place people stay and grow! Summary of the Position Work is performed onsite in Carthage, TN. This is an hourly entry level production manufacturing position and relocation is not available. Work environment is not temperature controlled. Position Hours: 2nd shift - 4:30pm - 3:00am Monday - Thursday. (2nd shift receives a 10% shift premium.) Overtime varies for Friday and Saturday and may be mandatory. (Overtime is currently mandatory for Fridays and some Saturdays.) Job Responsibilities Summary of the Position This position is responsible for the preparation and brazing of fabricated tube assemblies, including complex braze processes as described below. Key Deliverables Works safely and supports safety within their team and across the organization. This position is responsible for the preparation and brazing of fabricated tube assemblies. Key Responsibilities/Essential Functions Set-up and assembly of parts for brazing operation Brazing tubes to customer specification using a brazing torch and applicable alloys and flux products Inspect all work by ensuring the product is brazed to quality standards and free of leaks and other abnormalities Work with quality control inspector on parts that do not meet leak test and inspection standards Maintain a safe work area by working safely, following safety guidelines, and wearing required personal protective equipment Perform any other job responsibilities directed by management as business dictates Job Requirements Education and/or Experience Preferred - High school diploma or general education degree (GED) Core Competencies Required Maintains a Customer Focus Takes Ownership Is a Team Player Uses Sound Judgment / Integrity Achieves Quality Results Takes Ownership Key Knowledge, Skills, Abilities, and Qualities Required Language Skills - Ability to read and interpret documents such as safety rules, blueprints, operating and maintenance instructions, and procedure manuals. Mathematical Skills - Ability to read measuring scales and tape measure. Ability to apply concepts of basic math including angels. Reasoning Ability - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands of Position Sitting or standing for a 10-hour work day as job dictates, with occasional overtime Heavy or constant visual attention that is required when performing job Ability to lift 35 pounds frequently and up to 50 pounds team lifting, raising or lowering an object from one level to another, including upward pulling Ability to handle job materials, sizing, holding, grasping, turning, or otherwise working with the hands Heavy or constant visual attention that is required when performing job Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Req ID: 26887 Summary Lincoln Electric is seeking a proactive Purchasing Associate II to support our Baker Industries operation in Macomb, MI. In this role, you will manage key supplier relationships for direct and indirect materials and services, execute sourcing requirements from Buyers and corporate-led programs, and drive cost, quality, and delivery performance. Responsibilities Own supplier performance (OTD, quality, cost) and drive corrective actions to support operational goals Collaborate with Engineering, Quality, and Operations to identify, evaluate, and qualify suppliers Actively participate in site leadership meetings to align procurement with business priorities Mitigate supply risk through alternative sourcing, safety stock strategies, and supplier-managed inventory programs (VMI, consignment, etc.) Improve working capital via extended terms, stocking programs, and Supply Chain Financing (SCF) Conduct total-cost-of-ownership analysis (freight, payment terms, INCO terms, lead time, MOQ, etc.) during supplier selection Lead or support cross-functional sourcing projects to deliver best-value solutions Establish and maintain standard costs; provide monthly cost-variance forecasting critical to quoting and profitability Create and manage RFx events using Ariba e-Sourcing platform Share production forecasts and schedules with suppliers to ensure continuity of supply Champion continuous improvement in procurement processes, SAP transactions, master data accuracy, and Source-to-Pay (S2P) systems Own supplier onboarding process in compliance with company policies Ensure full adherence to ITAR, CMMC, and other regulated procurement requirements Experience U.S. citizenship required (ITAR compliance) Minimum 1 year of procurement, buying, or supply chain experience in a manufacturing environment Strong knowledge of purchasing policies, processes, and ITAR/CMMC compliance for a publicly traded company Proficiency reading technical documents (blueprints, BOMs, routings, job travelers) Demonstrated supplier management and negotiation skills Experience with consumption-based and forecast-driven planning methods Advanced skills in Microsoft Office suite; SAP and Ariba experience strongly preferred Excellent communication, analytical, and problem-solving abilities Proven ability to prioritize, multitask, and meet deadlines in a fast-paced environment High attention to detail and commitment to continuous improvement Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Req ID: 26527 Summary Fori Automation, LLC, a Lincoln Electric Company, is a global supplier of welding, assembly, material handling, and testing equipment for automotive and non-automotive customers worldwide. Fori Automation focuses on delivering cost-effective, highly engineered products and systems designed and manufactured globally with localized sales, project management, and service. We are seeking an experienced Controls Software Engineer for our Shelby Township, MI site with a background in industrial software development. The Controls Software Engineer will initially support active projects and then transition to completing projects directly. They will take the lead on developing software on new projects and debug software on new machines. This role requires travel to customer sites for equipment installation and customer interaction. What You Will Do Design PLC software and HMIs for industrial automation equipment Debug and troubleshoot PLC software and HMIs Collaborate with cross-functional teams to maintain project timelines and critical path milestones. Maintain task lists and reports of open items. Maintain project design documentation and prepare customer deliverables. Ensure the controls engineering process is tracked and followed. Assist customers and local tradespeople in troubleshooting equipment issues. Conduct end-user training on equipment operation. Education & Experience Requirements Electrical Engineering or Computer Engineering degree preferred; Mechatronics degrees will also be considered. Minimum of two years of experience as a Controls Engineer or Controls Software Engineer with experience in designing Rockwell Logix 5000 or Siemens S7-1500 family processors. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Experience with electrical CAD systems, such as AutoCAD Electrical and/or ePLAN Experience with PLC programming in ladder and structured text. Experience programming HMIs Travel required: approximately 30% domestic and international. Weekend work may be required based on project schedules. Preferred Experience in computer programming languages, such as VB, C/C++, or C#. Experience with Rockwell and Siemens HMI preferred. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Summary of Job: Perform journeyman level construction, installation, alteration and repair of sheet metal products and equipment in accordance with blueprints, drawings and work orders; provide technical guidance and direction to lower level employees. Are you an experienced Sheet Metal Mechanic that takes pride in delivering high-quality mechanical systems that help businesses run smoothly and comfortably? If so, we have the perfect opportunity for you! As a key player in our construction team, you will be responsible for: Interpreting blueprints and specifications to determine the layout and configuration of sheet metal products. Fabricating, assembling, installing, modifying, and repairing sheet metal products using hand and power tools. Measuring, marking, and cutting sheet metal to size using specialized tools and equipment. Collaborating with other members of the construction team to ensure mechanical systems are installed on time and within budget. Ensuring all mechanical systems meet industry standards for quality and safety. We offer a competitive salary, comprehensive benefits package, and opportunities for growth and advancement. If you are a skilled and dedicated worker looking for a challenging and rewarding opportunity, we want to hear from you. Apply now! Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus free virtual primary care, mental health, and urgent care services for employees and their family members. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: The HVAC Maintenance Team Lead 3 will perform Maintenance inspections and ensure all maintenances are completed per the contract/filter belt list. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus free virtual primary care, mental health, and urgent care services for employees and their family members. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Salary Full-Time Function: Engineering Req ID: 27246 Summary Lincoln Electric is seeking a highly skilled Project Manager to support our Red Viking subsidiary based in Plymouth, MI. This role is responsible for leading complex, high-visibility projects that require significant resources, cross-functional collaboration, and seamless integration across teams. The Project Manager will drive initiatives from concept through final implementation, ensuring quality, budget, and schedule adherence while maintaining strong stakeholder alignment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more. Key Responsibilities Lead projects through the full lifecycle: initiation, planning, execution, monitoring, control, and closure. Define project scope, objectives, deliverables, and success criteria while aligning team members to roles and responsibilities. Develop detailed project schedules, allocate resources, and manage risks to ensure timely and cost-effective completion. Coordinate cross-functional efforts with engineering, manufacturing, procurement, testing, quality, distributors, vendors, and end users. Ensure strict compliance with quality standards; review and approve final project deliverables. Provide regular updates to executive leadership and business unit leaders on project progress, risks, and outcomes. Manage and maintain financial tracking tools including Gross Margin, Operating Profit, Backlog, SG&A, and other key financials. Utilize advanced Excel skills to create and troubleshoot formulas, build reports, and support executive-level reporting. Leverage ERP systems for project tracking, reporting, and ensuring data integrity across business functions. Lead and mentor a team of project engineers, staff engineers, and manufacturing professionals to achieve technical and operational goals. Prepare clear documentation, presentations, and reports for both internal and external stakeholders Required Experience & Education Education: Bachelor's degree in Engineering, Technical Discipline, or Business Administration (with strong technical design and execution background). Experience: 7-10+ years of project management experience in a manufacturing environment. Proven background in advanced capital equipment design, build, and installation (scheduling, procurement, manufacturing, testing, and quality). PMP certification strongly preferred. Project Leadership: Demonstrated success managing scope, budgets, schedules, personnel, and materials within complex organizations. Technical Knowledge: ERP systems experience for project management and reporting. Proficiency with Excel (advanced formulas, financial tracking, reporting). Familiarity with ISO 9001, ISO 14001, ISO 17025, or equivalent standards. Soft Skills: Strong leadership, influence, and negotiation abilities. Excellent written, verbal, and presentation communication skills. High attention to detail and documentation accuracy. Other Requirements: Supervisory experience managing technical professionals. This person will work very closely with a team of project engineers, staff engineers, and manufacturing professionals on a daily basis. Willingness to travel up to 20%. U.S. Citizen or Permanent Resident (ITAR compliance required). Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company provides core construction services of HVAC, plumbing and electrical for large and small commercial projects throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and construction excellence since 1944. Safety is a core value that permeates how we live, train, work, and look out for our teammates. Summary of Job: Supervises journeyman plumbers and helpers and the work performed in plumbing functions, including installs and repairs pipes, fittings and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes, studies building plans and working drawings to determine work aids required, and sequence of installations. Provide input on plumbing plans being developed and then handle implementation and maintenance of these systems. Education and Experience: High School diploma, GED, or equivalent, and five years related experience and/or training is required. Supervisory experience a plus. Skills and Abilities: Ability to troubleshoot issues with systematic, thoughtful, timely and effective solutions and procedures Demonstrate proper and safe use of tools and related equipment Experience in providing quality, professional customer related services Ability to work and communicate effectively individually as well as in a team environment Ability to handle disruptions in stride with professionalism. Ability to work independently in a commercial setting. Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus free virtual primary care, mental health, and urgent care services for employees and their family members. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Fleet Supervisor to join our UniFirst community. As a Supervisor in the Maintenance Department, you will be ensuring our fleet vehicles are properly functioning and regularly maintained as well as managing and mentoring our Fleet Technicians. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Manage overall upkeep and maintenance of fleet vehicles. Verify that the appearance of fleet vehicles meet UniFirst standards. Ensure vehicle compliance and safety requirements are met. Implement preventative maintenance programs for vehicles and equipment, and schedule predictive & preventative maintenance. Mentor, manage, and motivate performance of Fleet Technicians. Provide ongoing learning and development opportunities for all Team Partners. Produce reports related to work performance and departmental budget. Develop and maintain relationships with vendors to ensure best pricing for vehicle parts. Plow and salt location parking lot as needed. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED required. Must be 21 years of age or older. 5 years of equivalent experience required. Valid driver's license and a safe driving record are required. A CDL license is preferred. Must meet DOT requirements. Strong leadership and communication skills; ability to train potential techs. Must have experience in the use of diagnostic software and fleet management systems. Ability to work overtime as needed is required. Ability to lift up to 80lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. The estimated salary for this position ranges from $51,613 to $61,812 yearly. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Summary of Job: The Residential HVAC Installation Helper will assist HVAC Installation and/or Service Technicians with installations, maintenance, and service, including any ductwork, setting, and starting up split and package systems, gas piping, venting and electrical as required. Education and Experience 1-3 years of field experience (preferred) High school diploma or GED (preferred) EPA certified to handle refrigerant (preferred) Skills and Abilities: Able to braze copper Able to learn how to connect ductwork to indoor units (S/R Plenums) Basic computer knowledge Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus free virtual primary care, mental health, and urgent care services for employees and their family members. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer . Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $13.75 per hour Growth opportunities abound - We promote from within No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Employment Status: Salary Full-Time Function: Engineering Pay Range: ($74,603.39 - $106,576.28) Target Bonus: 8.0% Req ID: 27551 Summary Lincoln Electric Automation is seeking a Mechanical Design Engineer for our Chattanooga, TN location. As a Mechanical Design Engineer, you will focus on conceptualizing and detailing innovative automation systems including robotic work cells, tooling, and precision positioning equipment. Using advanced 3D CAD platforms (ProE/Creo, SolidWorks - preferred), you'll take ownership of mechanical design from concept through build, testing, and service support. This position involves heavy mechanical engineering design work to create custom tooling and fixtures. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do Lead the mechanical design of custom automation systems, often managing one (1) complex project at a time. Develop and document 3D mechanical designs using CAD software such as SolidWorks. Perform engineering calculations (static and dynamic systems) to ensure mechanical performance and safety. Collaborate with cross-functional teams-including fabrication, machine build, controls, and project management-throughout the project lifecycle. Provide technical drawings, mechanical layouts, and detailed part documentation to support production and procurement. Interact with customers regularly during design and development to ensure alignment with technical requirements and expectations. Ensure that mechanical designs meet all project specifications, quotations, and purchase order terms. Take ownership of small-scale projects as Engineering Lead, Designer, and Detailer. Support Estimating, Sales, Production, and Service departments with technical insight and collaborative problem-solving. Proactively manage timelines and to meet project schedules in a fast-paced environment (typical duration: 4-8 weeks). Required Experience & Skills 2+ years of mechanical design engineering experience Industrial automation or custom equipment development industry experience preferred. Associate or Bachelor's degree in Mechanical Engineering, Mechanical Design, or related field preferred but not required. Proficiency with 3D CAD software (ProE/Creo and/or SolidWorks required). Solid understanding of mechanical principles, fabrication methods, and materials. Basic knowledge of electrical, pneumatic, and robotic system integration is a plus. Strong mechanical aptitude with a hands-on approach to problem-solving. Experience in customer-facing technical roles and project collaboration is desirable. Proficiency in Microsoft Office tools (Word, Excel); experience with project management software is a plus. Ability to adapt to shifting priorities, solve complex design challenges, and deliver results under tight timelines. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $27 - $31.50 Target Bonus: 5.0% Req ID: 26585 Job Responsibilities • Repair and replace defective parts in generators, motors, controllers, switchboards, switches, conductors and other electrical fixtures. • Install, maintain and repair electro-mechanical, electrical, and electronic components. • Wiring motor power controls equipment circuits, reading and interpreting blueprints, wiring diagrams and schematics. • Testing wire connections with test equipment using multi-meters and oscilloscope. • Assemble junction boxes, back plates and harnesses per print. • Work closely with engineers and general contractors. • Travel as required. • Participate in ISO training and audits. • Any other assignments as deemed appropriate Job Requirements •High School diploma or equivalent is required. A Technical degree is a plus. 2 - 3 years of hands-on electrical experience working on a plant floor is preferred. • Ability to identify and implement efficient paths of action to finish assigned work • Should be able to test, calibrate, diagnose and repair various devices • Must be able to read and follow blueprints • Must be able to communicate clearly, articulately and professionally • Must have appropriate schedule flexibility, sense of urgency, motivation and versatility to make a substantial contribution to the organization's success • Ability to interact positively and constructively with all RedViking team members while representing company in a professional manner • Willingness to work “above and beyond” in order to meet company goals • Ability to travel to other company sites as well as customer sites as required • Well organized, detail oriented and self-motivated • Must have excellent time management skills • Must have excellent oral and written communication skills Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.