Line up worker jobs in Westfield, IN

Since 1961, Precoat Metals (**************** has been setting the standards in the coil coatings industry worldwide. We are able to achieve a "culture of excellence" thru the hard work and talent of the people on our team. Job Description The Production Worker role is a vital part to the overall operations to the plant. And the experience you have may make you a perfect fit to join our team. You will be called upon to assist with, and may be assigned work in, any area of the plant, including coating lines, slitting, shipping, receiving, paint vault, and packaging. Some of your Responsibilities include: Retrieves and transports bare coils and maintains flow of metal to lines by safely operating cranes, fork lifts, and upenders without damaging material or equipment. Trims, packages and bands finished coils according to customer specifications using proper skids, bands, pads, and wrapping materials. Inspects coils and identifies and reports defects. Reads and interprets production schedules. Accurately identifies proper skid and package specified on schedules. Reads and accurately records coil weights, order numbers, etc. Loads or unloads received or shipped coils onto or off of trucks. Qualifications Qualifications As the selected candidate, you will need a high school level reading and writing, visual acuity to read labels, meters, gauges, documents and instructions, in addition to the following: Ability to read and comprehend written materials such as schedules, SOPs, work rules, etc. Ability to effectively communicate with all members of team. Ability to safely operate small manual and electric hand tools. Available to work up to 12 hours per day on rotating shifts, that could include weekends and holidays. Additional Information Great culture & team! We are an Equal Opportunity Employer. Precoat Metals is a Drug Free Workplace

General Laborer Will perform various labor-intensive tasks in an industrial setting under the direction of a supervisor or foreman. May operate a variety of hand and power tools. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, clean up rubble and debris and remove waste materials. May assist other craft workers. Other duties may be assigned. Specific Duties and Responsibilities: Perform a variety of tasks involving strenuous manual labor, including, but not limited to lifting 25+ lbs., bending, kneeling, climbing, and working in the heat. Shovel bituminous concrete (asphalt) or other material into construction area. Assist in patching asphalt with hot and cold mix. Excavate and fills trenches and ditches. Maintain a clean job site: pick up all tools and equipment and secure job site each day in order to eliminate potential hazards. Material handling and storage. Load and unload trucks and haul and hoist materials. Ensure that proper safety and incident reporting procedures are followed. Bring problems to the attention of the Foreman or Safety personnel. Some knowledge of proper use of equipment, materials and supplies used in an industrial setting. Some knowledge of first aid and applicable safety precautions. Ability to work independently and complete daily activities according to work schedule. Ability to lift heavy objects, walk and stand for long periods of time and perform strenuous physical labor under adverse field conditions. Ability to communicate orally and in writing. Ability to use equipment and tools properly and safely. Ability to understand, follow and transmit written and oral instructions. Ability to meet attendance schedule with dependability and consistency. Other duties as assigned. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Qualifications Required for this Position: Education: no minimum education requirements. Certification/License: Valid Driver's License and TWIC Card Experience: 6+ months experience in an Industrial setting preferred. Austin Industrial is an Equal Opportunity Employer. See the “Know Your Rights” poster available in English and Spanish. No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( e. , payment must be required pursuant to the terms of a written agreement). Accessibility Note If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Teamat (877) 831-1217.

Use required pneumatic/hand tools to assemble product per Company and customer specifications. Understand associated parts and their relationship to the end product. Must be able to facilitate all aspects of the assembly process. Essential Functions: * Must be able to organize all aspects of the assembly process. * Perform inspection on product utilizing total quality concepts. * Perform preventive maintenance on equipment as needed. * Accurately report daily activities and production data as directed. * Conduct required quality checks using basic measurement equipment. * Keep work areas clean and free of safety hazards. * Exercise safe working habits while operating machines. * Perform other duties as assigned by the Supervisor/Coordinator. * Interact with technical support personnel and support downtime activities. * Must possess a high level of attention to details. * Actively contribute to the continuous improvement of safety culture, participating in safety training sessions, and promptly reporting any safety concerns. * All other duties as assigned. Education and Training * High School Diploma/GED required. * Prior production assembly experience, 1-2 yrs. preferred Minimum Qualifications * Ability to interpret production schedules and build specifications. * Ability to work overtime, as production demands require. * Must be able to utilize torque wrenches according to specs. * Must pass drug and alcohol screen and remain drug free throughout the term of employment. * Must follow all safety practices and policies. Physical Demands * Constant standing, walking, reaching, balancing, cervical spine motion, lower extremities, and simple grasp. * Frequent use of firm grasping, fine manipulation, and pitching. * Frequent forward bending, squatting, kneeling, and climbing. * Lifting and carrying up to 50lbs. Environmental Conditions * Non-temperature-controlled manufacturing facility. * Must wear eye, ear, and foot protection. Behavioral Traits Production - Adopting a strong orientation toward achievement, holding high expectations for yourself and others, pushing yourself and others to achieve at high levels Cooperation - Accommodating the needs and interests of others by being willing to defer performance on your own objectives in order to assist colleagues with theirs Consensual - Valuing the ideas and opinions of others and collecting their input as part of your decision-making process. Listening - Understands and learns from what others say. Attention to Detail - Diligently attends to details and pursues quality in accomplishing tasks Teamwork - Promotes cooperation and commitment within a team to achieve goals and deliverables. Safety Focus - Adheres to all workplace and trade safety laws, regulations, standards, and practices. Hendrickson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Pay: $22.79 - $29.05/hr (based off experience) Shift Options We offer multiple shift structures. Candidates must be willing to work overtime. 8-Hour Shifts (Monday-Friday): 1st Shift: 8:00 AM - 4:00 PM (+$0.10 shift differential) 2nd Shift: 4:00 PM - 12:00 AM (+$1.50 shift differential) 3rd Shift: 12:00 AM - 8:00 AM (+$1.25 shift differential) 12-Hour Rotating Shifts: 8:00 AM - 8:00 PM (+$0.45 shift differential) / 8:00 PM - 8:00 AM (+$1.25 shift differential) Rotating schedule: 4 days one week, 3 days the next, working every other weekend About the Role As a Production Worker, you will support daily manufacturing operations and report directly to the Department Supervisor. You will play a key part in ensuring safe, efficient, and high-quality production of our thermoformed and flexible packaging products. What You'll Be Doing Collaborate with team members and multiple departments to complete basic manufacturing tasks Operate production machinery and equipment; retrieve and pack product into boxes Make basic process adjustments to ensure quality output Monitor and report product quality in accordance with company standards Use critical thinking and troubleshooting skills when setting up new jobs Maintain a safe, clean, and organized work area Support additional departments as needed We'd Love to Hear From You If… You have previous manufacturing experience and/or formal training You can properly read a tape measure You can read and comprehend standard work instructions, perform basic math, and take accurate measurements You have a strong attendance and punctuality record You're an individual who wants to grow and advance within a manufacturing environment You have at least 2 years of manufacturing experience (Required)

Job Description We are seeking to hire Production Operator (ADP) for our Fishers, Indiana site! , the candidate will: Load material into the machine according to production planning Pick up the finished product from the machine Load material into the machine according to production planning Pick up the finished product from the machine. Check raw materials and verify it according to production planning. Build up the pallet according to pack scheme and fill in the production documentation. Restore the operativity of the machine under his control when needed. Give and receive detailed information on the production line status at the shift change. Keep clean and tidy the working area and the production lines, performing the autonomous maintenance works, on shift basis. Execute the line clearance at the production changeover. Requirements and qualifications: Secondary School. Experience in manufacturing companies (at least 1 year). Available to work 2nd shift Available to work weekends and holidays. Computer use Basic knowledge of workshop tools. Must be able to lift 20 lbs. Stevanato Group is an Equal Employment Opportunity (EEO) employer. We believe that a diverse workforce is key to our success. We welcome applications from all members of society irrespective of age, sex, disability, sexual orientation, race, religion or belief It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Job Type: Full-time Pay: From $23.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Work Location: In person

Do you take pride in being dependable and hardworking? Are you looking for an opportunity to play a key role in maintaining the vital infrastructure that supports our community? Join us and make a meaningful impact! The purpose of this position is to perform semi-skilled and manual work functions associated with the construction, maintenance and repair of water or wastewater facilities, systems, equipment and grounds. The following duties are normal for this position. These are not to be construed as exclusive or all-inclusive. Other duties may be required and assigned. Performs general maintenance, repair work and basic operational tasks on water and/or wastewater facilities, systems, equipment, vehicles and grounds, including the following: Water Distribution: locating utility lines, repairing breaks in water mains, repairing or replacing service lines, servicing or replacing fire hydrants; flushing water system testing, installing and replacing meters, repairing or replacing valves and valve boxes, inspecting and repairing meter pits, testing water pressure and flow, testing and repairing backflow devices, collecting chlorine and iron samples. Water Treatment: installing, repairing and maintaining motors and pumps, acidizing iron filters, cleaning softeners, salt pits and plumbing lines, cleaning and repairing wells, performing maintenance on chlorine and fluoride equipment and manual and automatic valves and pipes, fitting pipes and welding system components, running basic tests, turning pumps on and off and responding to alarms. Perform various unskilled and semi-skilled maintenance work and operates a variety of tools and equipment in the operation, repair, maintenance and replacement of city utility systems and facilities. Ensure proper maintenance of vehicles, equipment and tools by cleaning and checking after use. Reports defects or needed repairs to supervisor as necessary. Assist in the installation and operation of temporary traffic control measures. Perform all duties in conformance with appropriate safety standards, including: confined space, trenching and shoring and lock-out, tag-out. Responds to 24-hour call for emergency situations; may be required to make initial assessment and respond accordingly. Transports, loads and unloads various equipment and materials used in projects. Provides information necessary to maintain City's Geographic Information System (GIS) function. Maintains records of work activities and inventory of equipment, tools and supplies. Assist Operators with daily tasks associated with their assignments. Assists with various plumbing, electrical, mechanical and carpentry projects for other City departments. Performs other related duties as required. Knowledge, Skills & Abilities Required to Perform Essential Job Functions: Ability to review, evaluate and record data. Ability to understand and follow written and verbal instructions. Ability to operate within established guidelines. Ability to exercise discretion in analyzing and selecting from alternative courses of action. Ability to communicate effectively with supervisor, co-workers and general public. Ability to perform basic mathematical equations. Ability to utilize a variety of machinery, tools and equipment associated with utilities construction, maintenance and repair activities, which include dump truck, forklift, front loader, tractor, mower, weed eater, power tools, hand tools, gas monitoring equipment, semi-trailer, vacuum truck, mini excavator, crane, grader, tapping machine, rodding machine, easement cleaner, hydraulic saw, gas saw, chain saw, jackhammer, chipper, gas monitoring equipment, pumps, air compressor, paint machine, hydraulic valve exerciser, line locator, lid locator, well cleaning equipment, video camera equipment, various diagnostic instruments, welding equipment, pipe snapper. Ability to operate a motor vehicle to conduct work activities. Ability to respond to 24-hour call. Ability to exert heavy to extremely heavy physical effort, on a regular, and at times sustained, basis, typically involving some combination of climbing and balancing, stooping, kneeling, crouching and crawling, and the lifting, carrying, pushing and/or pulling of objects and materials weighing 20-50 pounds; may occasionally involve objects and materials up to 100 pounds. Performance of essential functions may require exposure to adverse environmental conditions, such as dirt, dust, pollen, fumes, moisture, humidity, rain, snow, severe weather, temperature and noise extremes, machinery, vibrations, electric currents, traffic hazards, excavations, toxic agents, disease or pathogenic substances. Qualifications Required to Perform Essential Job Functions: High school diploma or GED, supplemented by vocational, technical or on-the-job training in water, wastewater, mechanical and/or electrical maintenance and repair. One (1) to two (2) years experience involving utilities construction, maintenance and repair, mechanical and electrical maintenance and repair or heavy equipment operation. Or any equivalent combination of education, training and experience that provides the requisite knowledge, skills and abilities for this position. Must possess and maintain a valid Indiana driver's license; CDL and appropriate endorsements may be required. The City of Carmel, Indiana, is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, the City will provide reasonable accommodation to qualified individuals with disabilities.

ASSEMBLER Position is responsible for the assembly of components as specified by customer work orders, engineering process routers, blueprints and any applicable code or specification. Accountabilities: Assemblers are responsible for producing conforming components that meet all blueprint dimensions within the said tolerances; any moving parts must operate correctly. Cleanliness and preservation of internal components must be maintained along with the final appearance of the component. All SOP's and WI's must be followed, and a safe, clean and organized work area must be maintained. Duties: Read and interpret blueprints, sketches, drawings, routing instructions, manuals and specifications to determine dimensions and tolerances of finished component. Use torque wrenches and understands torque methods and sequencing. Use precision measuring instruments. Operate hand tools and other shop equipment such as grinders, jitter bugs, drills, etc. Install thread inserts, keenserts and fasteners. Operate and trouble shoot equipment such as electro etchers, hydro test pumps, vacuum pumps, etc. Perform material handling functions using fork trucks, overhead cranes, etc. Enter correct data into data collection system (IDC) and ensure accurate labor reporting. Understand and properly operate the “Available Documents” program. Monitor and maintain proper cleanliness of equipment and work area on a daily basis. Communicate with co-workers and supervisor to receive instructions and coordinate activities. Job Qualification Requirements: Educational Experience - A high school diploma or equivalent is required. A minimum of one year of trade school, vocational education or apprenticeship is preferred but not required. Experience - Not Applicable Physical Demands - The employee is required to: Stand, walk, push, pull, reach overhead, and bend to floor. Exert 50 to 100 pounds of force occasionally, and/or Exert 25 to 50 pounds of force frequently, and/or Exert up to 10 to 20 pounds of force constantly to move objects. Certification Required - Not Applicable Visual Acuity - Near acuity and accommodation are required for reading blueprints and assembling small details. Hearing Ability - Ability to monitor machine sounds to identify and diagnose changes in order to take appropriate action. Accommodations as required for communicating with employees. Working Conditions - The employee is subject to: High noise levels from operating machines. Physical hazards from moving equipment and production components. Breathing fumes, dust and mist. Skin exposure to oils and cutting fluids. The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. Attendance is an essential job function. Employees will operate in compliance of all recognized standards that Major Tool adheres to (such as AS9100, ISO 9000, ASME and AWS codes), including all supporting policies and procedures. About Major Tool Major Tool & Machine (MTM) was founded in 1946, starting with only four employees to support the commercialization of the jet engine following World War II. Today, MTM is a contract manufacturer in Indianapolis, Indiana with a 600,000+ sq ft. manufacturing facility, 400+ skilled employees, best-in-industry business and quality systems, and project management expertise. Located for easy access on the east side of downtown Indianapolis, we are short commute away from most any place in the counties surrounding Indianapolis. Major Tool is a Precinmac company, a portfolio of businesses across the US and Canada that provide similar machining, fabrication and other manufacturing services to customers who provide critical services in turn in their various industries. Our Precinmac values are Trust, Gratitude, Action, Excellence and Growth, with a commitment to live these out daily in our workplaces. Benefits Excellent Benefits including three health insurance plan options - with a base plan option requiring ZERO employee paid premium. Dental and vision plans have very reasonable employee premiums. Participants in our health insurance have the onsite clinic available at no additional charge for medical services. All employees can access the mental health services provided in the clinic, For HDHP health insurance options, we contribute to your health savings account (HSA) and offer other flexible spending account (FSA) options. We support your retirement goals with a 401k company match. In addition to work schedule options we provide immediate Paid Time Off (PTO) availability and 10 paid Holidays, Along with in house training programs, we offer educational assistance for coursework that will support your career growth at Major Tool, We care about the health of our employees and provide a tobacco free facility, onsite fitness center and wellness events, short and long term disability and life insurance coverage fully paid. We are proud to be an Equal Opportunity Employer. We follow all applicable non-discrimination laws relating to employment, including candidates with disability or veteran status. 3rd shift

General Laborer Will perform various labor-intensive tasks in an industrial setting under the direction of a supervisor or foreman. May operate a variety of hand and power tools. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, clean up rubble and debris and remove waste materials. May assist other craft workers. Other duties may be assigned. Specific Duties and Responsibilities: + Perform a variety of tasks involving strenuous manual labor, including, but not limited to lifting 25+ lbs., bending, kneeling, climbing, and working in the heat. + Shovel bituminous concrete (asphalt) or other material into construction area. + Assist in patching asphalt with hot and cold mix. Excavate and fills trenches and ditches. + Maintain a clean job site: pick up all tools and equipment and secure job site each day in order to eliminate potential hazards. + Material handling and storage. + Load and unload trucks and haul and hoist materials. + Ensure that proper safety and incident reporting procedures are followed. Bring problems to the attention of the Foreman or Safety personnel. + Some knowledge of proper use of equipment, materials and supplies used in an industrial setting. + Some knowledge of first aid and applicable safety precautions. + Ability to work independently and complete daily activities according to work schedule. + Ability to lift heavy objects, walk and stand for long periods of time and perform strenuous physical labor under adverse field conditions. + Ability to communicate orally and in writing. + Ability to use equipment and tools properly and safely. + Ability to understand, follow and transmit written and oral instructions. + Ability to meet attendance schedule with dependability and consistency. + Other duties as assigned. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Qualifications Required for this Position: **Education:** no minimum education requirements. **Certification/License** : Valid Driver's License and TWIC Card **Experience:** 6+ months experience in an Industrial setting preferred. **Austin Industrial is an Equal Opportunity Employer.** + _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **No Third-Party Inquiries Please** + This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _e._ , payment must be required pursuant to the terms of a written agreement). **Accessibility Note** + If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Preferred** + Valid Driver's License Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The Production Worker is under the direction of the shift supervisor and will primarily be responsible for assembly of reconditioned products using established production procedures, following safety protocol and adhering to company's quality standards. Responsibilities: Demonstrates ability to meet production standards on specific assignments within required time Maintains good housekeeping and clean work areas in assigned space Performs all assignments in accordance with safety specifications, instructions, and requirements Responsible for safety and quality throughout production Responsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintained Reports all production waste/issues to Production Lead or Supervisor Performs other duties as required by Supervisor or Manager Follows all company policies and procedures Requirements: High School diploma or equivalent Experience working in a Manufacturing Environment Ability to work in a fast paced environment Understand plant safety guidelines and pass all required safety training Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Physical Requirements: Ability to be on feet up to 8-12 hours per shift Use of hands and fingers to perform job function Ability to stoop, kneel, bend and climb Ability to lift up to 35lbs

ABLE TO SIT AND STAND IN ONE LOCATION FOR LONG PERIODS OF TIME GREAT HAND AND EYE COORDINATION AND ATTENTION TO DETAIL STRONG WORK ETHIC - ON TIME AND READY TO START MEET PRODUCTION GOALS THERE MAY BE SPECIFIC JOB REQUIREMENTS TO QUALIFY AND THE ASSIGNMENT MUST HAVE OPENINGS.

Workers selected for this role are not permitted to have any driving responsibilities nor are they allowed to have any driving responsibilities for the entire assignment Summary of Key Responsibilities: The Assembly Technician is responsible for assembling, electrical testing, troubleshooting and quality control of electromechanical assemblies and sub-assemblies. Ensure assemblies meet specified quality standards and maintain quality documentation. Read, understand and interpret engineering drawings, bills of material and standing instructions Utilize various hand tools, measuring tools (micrometers, calipers, gauge pins), testing tools (HiPot tester, Multimeter) and other standard power hand tools to complete work tasks Calculate parameters and test finished product according to standing instructions Assemble product according to work instructions and standing instructions Verify quantities and items shipping out per Work Orders. Pack finished product to deliver Inspect parts according to geometrical, dimensional, tolerance, and visual inspections on inbound POs to ensure parts meet drawing specifications and are in good condition Support ISO Certification, maintenance of documents, and audits. Participate in ISO yearly training Receive material coming into the Assembly Center by vendors, customers, or other warehouses accurately and promptly Document and control all Non-Conforming material Assist in inventory management Other duties as assigned Disclaimer: The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Start Time: 7:30 a.m. End Time: 4:00 p.m.

LABORER - FIBER OPTIC CABLE SYSTEM Verita Telecommunications Corporation is fast growing telecommunications contractor that specializes in engineering and construction. Our employees are highly motivated and internally driven to succeed. Verita is seeking professionals with a growth mindset that are looking to work in a team atmosphere. Our employees are leaders in their fields and have committed to grow. We are determined to hire candidates with values that fit our culture of leading, growing and working as a team! NATURE OF WORK A Laborer is responsible for preparing work site to locate utilities and eliminate potential hazards prior to drilling. Load, unload and transport construction materials and tools. Hand dig to clear debris for Drill Operator, check utilities and clearances. Excavate and fill trenches and ditches. Perform installation of underground telecommunications cable and conduit. Assist with machinery maintenance and other duties as assigned. Perform job site clean-up and area restoration. REQUISITE SKILLS Education / Certification : Minimum High School Diploma or equivalent. Valid Drivers License Experience: No prior experience required. Physical Requirements / Aptitude: Ability to work in trenches, manholes, tunnels and confined spaces and in work settings with moderate to loud noise levels. Able to move in different positions - crouching, kneeling, reaching, bending and lifting 75 lbs., unassisted. Other: Must have valid driving license. Must get a CDL Permit within 30 days of start date. Must obtain CDL within 6 months of start date. Willing to work overtime when required, willing to travel and to work in all-weather conditions. Self-motivated and able to work well in groups. Dedicated, hard-working and goal focused. Motivated to grow and train into other positions. Other duties when assigned Team Verita Benefits! Financial Wellbeing Competitive pay with ongoing performance review and annual merit increase 401(k) with company match Health & Wellness Choice of various PPO, HMO, and HSA accompanied plans Family & Lifestyle Paid Time Off, Paid Holidays, Bereavement Leave Planning for the Unexpected Short and long-term disability, life insurance Paid for by the company Accidental death & dismemberment Paid for by the company Voluntary life insurance, accident, and critical illness

LABORER - FIBER OPTIC CABLE SYSTEM Verita Telecommunications Corporation is fast growing telecommunications contractor that specializes in engineering and construction. Our employees are highly motivated and internally driven to succeed. Verita is seeking professionals with a growth mindset that are looking to work in a team atmosphere. Our employees are leaders in their fields and have committed to grow. We are determined to hire candidates with values that fit our culture of leading, growing and working as a team! NATURE OF WORK A Laborer is responsible for preparing work site to locate utilities and eliminate potential hazards prior to drilling. Load, unload and transport construction materials and tools. Hand dig to clear debris for Drill Operator, check utilities and clearances. Excavate and fill trenches and ditches. Perform installation of underground telecommunications cable and conduit. Assist with machinery maintenance and other duties as assigned. Perform job site clean-up and area restoration. REQUISITE SKILLS Experience: * No prior experience required. Physical Requirements / Aptitude: * Ability to work in trenches, manholes, tunnels and confined spaces and in work settings with moderate to loud noise levels. * Able to move in different positions - crouching, kneeling, reaching, bending and lifting 75 lbs., unassisted. Education / Certification: * Minimum High School Diploma or equivalent. * Valid Drivers License Other: * Must have valid driving license. * Must get a CDL Permit within 30 days of start date. * Must obtain CDL within 6 months of start date. * Willing to work overtime when required, willing to travel and to work in all-weather conditions. * Self-motivated and able to work well in groups. * Dedicated, hard-working and goal focused. * Motivated to grow and train into other positions. * Other duties when assigned Team Verita Benefits! Financial Wellbeing * Competitive pay with ongoing performance review and annual merit increase * 401(k) with company match Health & Wellness * Choice of various PPO, HMO, and HSA accompanied plans Family & Lifestyle * Paid Time Off, Paid Holidays, Bereavement Leave Planning for the Unexpected * Short and long-term disability, life insurance Paid for by the company * Accidental death & dismemberment Paid for by the company * Voluntary life insurance, accident, and critical illness

Responsible for performing a variety of tasks associated with prepping, pouring, placing, and finishing of concrete. Tasks include assisting carpenters and finishers in daily tasks which include, but are not limited to the following: erecting and setting forms and scaffolding; loading and unloading equipment; placing and finishing of concrete; transporting equipment, materials, and supplies; and ensuring a safe and clean job-site.

The Assembly Operator assembles Piezo transducer sub-assemblies and units, under well-defined instructions and in accordance with company policy and safety procedures. JOB DUTIES & RESPONSIBILITIES Perform a range of routine mechanical and or electromechanical assembly of small parts or components in accordance with company instructions and procedures. Review shop traveler route card, or uncomplicated schematic drawings to confirm sequence of operations. Position very small parts such as fine pins, wires, solder particles and epoxy using tweezers or positioning fixtures Mix epoxies according to company formulas Bond or seals parts or assemblies with epoxies using direct heating elements or ovens and performs a variety of in-process testing Adjusts, bends, aligns and solders fine wires to base parts Ability to record test data into computer. Maintains proper paper work throughout the assembly process. QUALIFICATIONS Experience/Background 1-2 years of relevant production assembly experience in a Manufacturing or industrial setting preferred This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). Must be a U.S. person or protected individual within the meaning of ITAR. ITAR defines U.S. persons and protected individuals as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), U.S. Temporary Resident, Political Asylee or Refugee. Skills Soldering experience preferred Manual dexterity required for operating equipment, computers and small parts Ability to read and interpret basic company documents, such as safety rules, operating/manufacturing instructions, policies and procedures Self-directed work ethic Quality-minded Detail oriented Basic math proficiency Able to problem-solve using existing procedures to perform straightforward tasks Proficient in English (reading, writing & verbal skills) Education High School diploma or the equivalent education and work experience in a manufacturing or industrial setting that will allow successful performance of job expectations ENVIRONMENTAL & PHYSICAL REQUIREMENTS Manufacturing / Non-Sedentary Requirements Incumbent must be able to perform the essential functions of the job. Work may be performed in an office or warehouse environment. Typically requires the ability to spend 66%+ hours each work day doing the following activities: stand for extended periods of time, walk, bend, stoop, or climb. May have possible exposure to dust, and may require the ability to lift and/or push up to 50 pounds 33% - 66% of the time. ADDITIONAL INFORMATION REGARDING JOB DUTIES AND S Job duties include additional responsibilities as assigned by one's supervisor or another manager related to the position/department. This job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Amphenol reserves the right at any time with or without notice to alter or change job responsibilities, reassign or transfer job position or assign additional job responsibilities, subject to applicable law. Amphenol shall provide reasonable accommodations of known disabilities to enable a qualified applicant or employee to apply for employment, perform the essential functions of the job, or enjoy the benefits and privileges of employment as required by the law. Powered by ExactHire:189573

Job DescriptionSalary: $18.00 Our resin manufacturing company is seeking 3rd shift (11p-7:30a) Production Laborers to support the manufacturing of resin. Laborers will be responsible for staging, prepping, loading, and offloading finished products. Production laborers also ensure machinery, and the production floor is clean and well maintained. We are looking for experienced, energetic, and dynamic laborers who can perform in a plant working environment with varying climates seeking to progress with an industry leader to take our company to the next level in terms of quality and environmentally safe products. Training for this position will be conducted on 1st shift (7a-3:30p) and will last approximately 30 days. This position is on a rotating schedule to include every other weekend. Essential Duties and Responsibilities Start assembly and production machinery at beginning of shift. Load reactors with materials in various stages. Assist blenders to ensure the flow of production is not interrupted. Ensure the production area is clean and free of debris. Responsible for moving materials to production areas. Adhere to safety guidelines dictation of the production and handling of materials in a factory. Ensure that production deadlines are met. Report issues or problems to immediate Team Lead or Supervisor. Complete production daily tasks as required. Other duties as assigned Assist in other departments as needed; cross training provided Qualifications and Education Requirements High School diploma or GED required. Ability to speak, read, and write in English. Bilingual (Spanish) preferred Attention to detail. Strong communication skills. General math. 2 years experience in factory, plant, foundry, mills, manufacturing, or construction environment preferred Experience operating machinery or equipment. Sit down forklift experience a plus Must past drug and background. ***NO RECRUITERS OR AGENCIES***

This position meets at the company shop in Indianapolis daily and then employees would go out to assigned job sites.

The Order Assembly Associate works in a temperature-controlled, fast-paced environment. The associate in this position assembles clamshells into kits, according to customer orders. This teammate moves quickly from work station to other areas while the lines continue to operate. The teammate in this position must have strong initiative, organization skills, and communication skills. This position reports to the Packaging Supervisor. The teammate in this position must follow and understand Food Safety Compliance. Additionally, the teammate must follow direction from management as needed to meet departmental goals. Requirements Experience with Food Safety programs Knowledge and understanding of GMPs, HACCP & Quality/Hold procedures Knowledge and understanding of Food Safety Policy Statement PREFERRED EDUCATION & EXPERIENCE: High school diploma or GED 1 year in food manufacturing Mechanical aptitude Knowledge of GMP's Bilingual English-Spanish ADDITIONAL ELIGIBILITY QUALIFICATIONS: Promoting and maintaining a safe environment through teamwork and proper food sanitation training Able to communicate, read, and have good written and verbal communication skills Ability to understand, follow, and communicate to other standards and procedures Good organizational skills, and detail orientated Able to cooperate with all co-workers and supervisory staff Able to understand and follow instructions as given Able to follow safety procedures Able to work independently Must have reliable transportation WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions. The employee is frequently exposed to moving mechanical parts and toxic or caustic chemicals. The employee is occasionally exposed to outside weather conditions. The noise level in the work environment is usually moderate PHYSICAL DEMANDS: Able to work overtime as needed Frequent lifting and/or carrying of objects weighing up to 10lbs with occasional lift up to 25lbs The employee is regularly required to stand and walk. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25lbs and frequently life or move up to 50lbs TRAVEL: N/A COGNITIVE/SENSORY REQUIREMENTS: Able to lift up to 50 pounds without help. Able to stand for 8-10 hours per day Ability to lift, carry, bend, push and twist frequently as needed. Ability to life, carry, bend, push and twist - frequency varies during a normal shift.

CMS Mechanical is looking for a Skilled Laborer CMS Mechanical self-performs work in both the commercial and industrial sectors, including scopes of work related to the provision, installation, and service of heating, ventilating, and air-conditioning (HVAC) systems, process piping/systems, and energy systems. This includes electrical generation and co-generation systems, along with all related components required to deliver fully functional systems to our customers. Requirements Duties and Responsibilities (Essential Job Functions) Clean and prepare construction sites to eliminate hazards; ensure proper use of tools and equipment Cut steel using flame torch Bevel, grind, and prepare materials for welding Load, unload, and identify materials, machinery, and tools; distribute to appropriate locations per project plans or Superintendent direction Lubricate, clean, and repair machinery, equipment, and tools Measure pipe and cut to size Apply caulking, cleaning solutions, or other compounds by hand or with tools Prepare forms for concrete pouring and dismantle after use using various tools Grind, scrape, sand, or polish surfaces using abrasive tools or machines Dig ditches or trenches, backfill excavations, and level earth to grade specifications using manual tools Other duties as assigned Education and Experience High school diploma and a minimum of 2-3 years of previous mechanical construction experience, including HVAC ductwork, electrical controls, and threaded pipe installation Knowledge, Skills, and Abilities Strong communication skills and ability to coordinate work with team members Strong organizational skills for managing time and resources efficiently Ability to read blueprints and drawings Ability to work independently Must be able to use various hand and power tools Must be able to accurately read and use a tape measure Supervisory Responsibilities Works under the direction of a Superintendent or Skilled Tradesman Working Conditions Physical effort required for frequent lifting or moving of heavy materials Ability to lift up to fifty (50) pounds and walk a project site Regularly required to sit or stand, bend, and reach Ability to work in confined space Work is performed in outdoor weather conditions on job sites Must be able to travel for extended periods to support projects Benefits CMS offers competitive pay along with a benefit package including Health, Vision, and Dental Insurance, AFLAC, 401K with company match, Paid Time Off, Life Insurance, and Paid Holidays.