Machinist jobs in Covina, CA

Pacific Aerospace Corp (PAC), based in the heart of Southern California, is a leader in precision machining, advanced composites, and assembly for the aerospace industry. With over four decades of machining experience and a 25,000 sq. ft. facility, PAC delivers superior quality and precision to its customers through advanced 5-axis CNC technology. The company specializes in manufacturing advanced composite structures and assemblies for UAVs, launch vehicles, and light aircraft, adhering to the stringent quality standards of the aerospace industry. PAC's in-house engineering and support teams ensure projects are completed on time, from initial design to final production. Role Description This is a full-time on-site role for a Computer Numerical Control (CNC) Machine Operator based in Stanton, CA. The CNC Machine Operator will be responsible for setting up, operating, and monitoring CNC machines to produce high-quality parts to meet aerospace industry standards. Daily tasks include performing precision machining operations, conducting quality checks, interpreting technical drawings and specifications, and ensuring that all equipment is maintained and in proper working order. Qualifications Proficiency in Machine Operation and Machinery handling Experience with Milling and Machining techniques Knowledge of Quality Control processes to ensure precision and adherence to standards Ability to interpret and work from technical drawings and specifications Strong attention to detail and commitment to maintaining high-quality production standards Prior experience in the aerospace industry is advantageous High school diploma or equivalent; technical certifications in CNC operation are preferred What You'll Do Reading and interpreting technical blueprints. Set-up/operation of CNC multi-axis milling and multi-axis turning machines. Setup various work holding and fixture methods according to a setup sheet. Run and prove out new programs. Troubleshoot issues and make minor adjustments during the manufacturing process. Perform quality control both during and at completion of the manufacturing process. Help clean and maintain CNC equipment. Required Qualifications 5 to 15+ years experience as a machine setup/operator. Clear understanding of G and M code. Intermediate level of familiarity with multi-axis and 3D machining. Experience with 3+1 / 3+2 axis milling, live tooling lathes, mill-turns and/or multi task machines. Experience with Fanuc16 & 31M, Siemens or Heidenhain Intermediate level of familiarity with various alloys, metals, plastics, etc. Intermediate level of tooling and fixture experience. Intermediate level of GD&T knowledge. Ability to take ownership of set-up and operation process from start to finish. Ability to adapt between R&D and short production. Ability to multi-task. Ability to lift 50 lbs. U.S. Person status is required as this position needs to access export controlled data. Preferred Qualifications 3 & 5-axis simultaneous set-up and operation experience. Experienced with navigating a CAD model to measure dimensions. US Hourly Range $26-$46 USD

Irvine, CA - On site Full time We are seeking an experienced CNC Programmer/Machinist to join our team. This is a fulltime on-site role for a CNC Programmer/Machinist located in Irvine, CA. The CNC Programmer/Machinist will be responsible for creating and optimizing CNC programs, setting up and operating CNC machines, and interpreting technical drawings to produce precise components. This position will be primarily responsible for CNC Milling, including 4 and 5-axis milling machines as well as mill-turn lathes. Daily tasks include programming, setup, job scheduling, and ensuring the quality of finished products through meticulous attention to detail. Responsibilities • Complete technical reviews of drawings and specifications. • Program CNC machines using Mastercam, with a focus on 4 and 5-axis CNC milling as well as CNC mill-turn lathes. • Complete setup and first articles for each operation. • Operate machines during times of lower programming demand. • Review and adhere to job schedules and milestones. • Work with engineering, inspection, and assembly teams to ensure product quality meets specifications. • Ensure machined components meet their cycle time and cost estimates. • Complete root cause and corrective action reports as required to address issues. • Provide strong leadership and training to team members. Qualifications: • 5+ years of experience in CNC Programming and Machining • Experience programming 4 and 5-axis CNC mills and CNC mill-turn lathes using Mastercam. • Ability to interpret and work from technical drawings and specifications. • Ability to interpret and review 3D models using SolidWorks and 2D drawings using AutoCad. • Excellent problem-solving skills and attention to detail. • Ability to work independently and as part of a cross-functional team. • Dedicated to meeting internal and customer schedule commitments. • Familiarity with Epicor ERP a plus. Thanks & Regards, Jennifer |Sr Technical Recruiter Minisoft Technologies LLC ************| *************************

Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! ************************************* Summary: The Manual Machinist will review samples, drawings or instructions to understand specifications of output, plan the sequence of necessary actions for the completion of a job, take measurements and mark material for cutting or shaping, select appropriate machines (e.g. lathes) and position or load material for a job and perform routine machine maintenance and repair minor damages. Responsibilities of the Manual Machinist include, but are not limited to: * Review samples, drawings or instructions to understand specifications of output * Plan the sequence of necessary actions for the completion of a job * Take measurements and mark material for cutting or shaping * Select appropriate machines (e.g. lathes) and position or load material for a job * Determine and program size of batches, speed of machine etc. * Monitor machine while working to adjust the feed, maintain temperature and identify issues * Check output to ensure consistency with specifications and discard defects * Keep records of approved and defective units or final products * Perform routine machine maintenance and repair minor damages Qualifications of the Manual Machinist include, but are not limited to: * Proven experience as machinist * Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) * Ability to use precision tools (e.g. calipers) to take accurate measurements * Knowledge of the properties of metal and other material * Ability to read blueprints, schematics and manuals * Good at math with analytical abilities * Physical stamina and strength to lift heavy items * Acceptable driving record, according to company guidelines. * High school diploma or equivalent; completion of vocational training or an apprenticeship will be an asset #LI-YJ1 #zrjj Additional Information: * Physical Demand: Must be able to lift up to 50 lbs. unassisted. * Pay: $25 - $55 DOE * Working Conditions: Shop Environment * Training/Certifications: N/A * Shift Time/Overtime: Day Shift 6 am to 6 pm * Travel: N/A * Education: HS Diploma or GED DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job Description Manual Machinist Pay: $16.50 - $45.00 per hour Why Join Us? Are you a hands-on machinist who enjoys working with precision tools and creating high-quality parts? We are looking for a dedicated Manual Machinist to join our growing team! In this role, you will operate and maintain manual machines, including lathes, milling machines, and grinders, to create precision parts for aerospace applications. Responsibilities Operate manual lathes, mills, and grinders to machine parts to specifications Read blueprints and use shop math to ensure accuracy Set up tools, fixtures, and materials correctly Inspect parts for quality and make adjustments as needed Follow safety procedures and best machining practices Assist in process improvements and collaborate with the team Experience with CNC machines is a plus but not required Work with Hardinge lathes, Bridgeport mills, LeBlond lathes, and drill presses (experience preferred) What We Offer Training & Development: On-the-job training, vocational training, and up to $1,000/year for education Health Benefits: 100% paid medical, dental, and vision for employees 401K & Profit Sharing Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years Paid Holidays: 7 major holidays per year Work Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts Overtime Opportunities What You Need At least 1 year of manual machining experience or related training Ability to read and interpret blueprints Strong attention to detail and quality Knowledge of speeds, feeds, and tooling (a plus!) Physical Requirements Must be able to stand, walk, and use hands frequently Ability to lift up to 50 lbs as needed Be part of a supportive and skilled team that values precision, teamwork, and continuous learning. We believe in investing in our employees and providing a great work environment. Get a glimpse of our shop environment and culture by watching this video: ******************************************** Apply today! For more information on our benefits, visit: *************************************** 6:30 AM - 3:00 PM, Monday to Friday (with overtime opportunities)

Manual Machinist Pay: $16.50 - $45.00 per hour Why Join Us? Are you a hands-on machinist who enjoys working with precision tools and creating high-quality parts? We are looking for a dedicated Manual Machinist to join our growing team! In this role, you will operate and maintain manual machines, including lathes, milling machines, and grinders, to create precision parts for aerospace applications. Responsibilities Operate manual lathes, mills, and grinders to machine parts to specifications Read blueprints and use shop math to ensure accuracy Set up tools, fixtures, and materials correctly Inspect parts for quality and make adjustments as needed Follow safety procedures and best machining practices Assist in process improvements and collaborate with the team Experience with CNC machines is a plus but not required Work with Hardinge lathes, Bridgeport mills, LeBlond lathes, and drill presses (experience preferred) What We Offer Training & Development: On-the-job training, vocational training, and up to $1,000/year for education Health Benefits: 100% paid medical, dental, and vision for employees 401K & Profit Sharing Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years Paid Holidays: 7 major holidays per year Work Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts Overtime Opportunities What You Need At least 1 year of manual machining experience or related training Ability to read and interpret blueprints Strong attention to detail and quality Knowledge of speeds, feeds, and tooling (a plus!) Physical Requirements Must be able to stand, walk, and use hands frequently Ability to lift up to 50 lbs as needed Be part of a supportive and skilled team that values precision, teamwork, and continuous learning. We believe in investing in our employees and providing a great work environment. Get a glimpse of our shop environment and culture by watching this video: ******************************************** Apply today! For more information on our benefits, visit: *************************************** 6:30 AM - 3:00 PM, Monday to Friday (with overtime opportunities)

Thank you for your interest in joining Solventum. Solventum is a new healthcare company with a long legacy of solving big challenges that improve lives and help healthcare professionals perform at their best. At Solventum, people are at the heart of every innovation we pursue. Guided by empathy, insight, and clinical intelligence, we collaborate with the best minds in healthcare to address our customers' toughest challenges. While we continue updating the Solventum Careers Page and applicant materials, some documents may still reflect legacy branding. Please note that all listed roles are Solventum positions, and our Privacy Policy: *************************************************************************************** applies to any personal information you submit. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Description: 3M Health Care is now Solventum Solventum is seeking Tool and Die Maker candidates to join our team in Irvine CA! Pay: $35.47 - $45.74/hour (plus shift premiums if applicable) At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers' toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue. We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you. The Impact You'll Make in this Role As a Tool and Die Maker, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: Performing precision Toolroom operations including milling, turning, grinding (surface/ID/OD), honing, blending, and polishing of deep cavity forming dies Operating advanced equipment such as vertical mills, grinders, lathes, comparators, microscopes, and precision measuring tools Designing, machining, assembling, modifying, and troubleshooting dies, fixtures, and mechanical equipment to exact tolerances Collaborating with peers to optimize productivity, improve tooling, and enhance processes for cost reduction and efficiency Applying and evaluating principles of precision fabrication for tools including punches, dies, jigs, and fixtures Possessing the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts. Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications: Possess a High School Diploma/GED or higher (complete prior to start) Minimum of three (3) years of tool room experience Additional qualifications that could help you succeed even further in this role include: Ability to work overtime, weekends, or holidays as needed Ability to work either first, second or third shift (depending on shift availability) Strong metallurgical background with knowledge of carbides, tool steels, and alloys Familiarity with rubber and plastic machining Experience in heat treatment, transfer presses, and progressive dies Skilled in mechanical and non-mechanical tasks; proficient with advanced shop tools Ability to operate precision machines and measuring devices (e.g., lathes, grinders, mills, calipers, micrometers) Expertise in maintaining close tolerances and interpreting blueprints Process analysis and improvement skills; capable of mentoring apprentices Solid understanding of trigonometry for tooling applications Background in maintenance, systems, and electro-mechanical work Work location: Onsite - 2111 McGaw Ave, Irvine CA 92614 Travel: No Travel Relocation Assistance: Not Authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being Solventum offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope. Applicable to US Applicants Only:The starting rate of pay for this position is $35.47, with the potential to reach $36.49 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************************************** of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers. Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain *****************. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains. Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. Solventum Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.

A Conventional and CNC Machinist that works from blueprints, rough sketches, and verbal instructions to fabricate a variety of complex machined components. Performs non-repetitive assignments of a complex and difficult nature, involving the setup and operation of a wide variety of machine tools, such as lathe, mill, grinder, drill press, hand tools and CNCs. Knows the working qualities of a wide variety of materials including aluminum, stainless steel, brass and other materials. Type of Position: Temporary to Hire Hourly Rate: $25.00 - $40.00 Duties and Responsibilities • Studies specifications, such as blueprints, sketches, models, or descriptions and visualizes product to determine materials required and machines to be used to fabricate parts • Computer dimensions, plans layout, and determines assembly method and sequence of operations •Works with Engineering team to determine best possible machining methods •Sets up and operates machine tools, such as lathes, milling machines and grinders to fabricate parts and verifies conformance of machined parts to specifications •Verifies dimensions, alignments and clearances using measuring instruments, such as dial indicators, gauge blocks, thickness gauges, and micrometers •May examine previously used tools, jigs, fixtures and designs and modify parts •Assists Manufacturing Engineering in design and development of production jigs and fixtures •Performs other related duties as required and assigned Education and Experience • High School diploma required • 5 years related to high volume production Machine Shop experience • Aerospace or manufacturing experience preferred • Ability to demonstrate hands-on capability with programming and machine • Strong organizational, interpersonal, and communication skills, both oral and written • Proven ability to adapt to fluctuating work assignments and fast paced environments • Detail-oriented with sound judgment, great follow-through and initiative • Demonstrated ability to work well in a team environment, proactive, and work independently • Proficient in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk. The employee is occasionally required to stand and sit. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. ITAR Requirements To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Hydra Electric Company is an Affirmative Action and Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email ********************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ******************** or call ************. This email and phone number are created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Equal Employment Opportunity Posters

Set up and operation of lathes, honing machines, surface grinders, hydraulic presses, and other tool room machinery. Cutting, reaming lapping, and polishing of carbide inserts to tolerances of .0003"/.0005" Knowledge of press fits and ability to assemble a series of inserts with or without a cap/wafer into a die case. Understanding of finishes, extrusion relief, angles, radius, venting, carbide grades and other tool making variables. Qualifications High School Diploma or GED. Ability to analyze and accurately read and interpret blueprints, customer drawings and industry specifications required. Proficient in the use of inspection equipment (such as micrometers, calipers, indicators, gages, comparator, etc.). Attention to detail with ability to think and act analytically and use mathematics to meet job requirements Ability to follow verbal and written instructions. Strong interpersonal skills including listening, speaking, and writing. Effective team member, willing to work and communicate with all levels of the business Excellent attendance record, including punctuality. Ability to work over-time as required including weekends when needed. Ability to lift and carry up to 40 lbs. Ability to stand 90%-100% of shift

Nikon AM Synergy Inc. is a cutting-edge provider of metal additive manufacturing (AM) solutions, specializing in the aerospace, defense (ultra-secure), and space industries. We focus on the manufacture and certification of production flight hardware, aiming to drive industry growth through the integration of AM technology. As a part of the Nikon Advanced Manufacturing Ecosystem, we leverage our engineering and manufacturing capabilities, alongside Nikon SLM Solutions and organic AM solutions, to push the boundaries of additive manufacturing in industry. Prototype Machinist The Prototype Machinist is responsible for programming and operating machinery to produce parts that conform to blueprints, adhering to GD&T specifications. This role involves working 3-5 axis machines, Wire EDM, as well as other pneumatic abrasive tools. A keen eye for detail and strong mechanical aptitude are essential. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs. Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts. Required Skills: Ability to read and understand blueprints to meet specified dimensions (GD&T). Understanding of machine tool accuracies, fixture offsets, and tool offsets. Knowledge of cutting tool feeds, speeds, and tool life for aerospace hard turning or milling. Proficient in using precision measuring instruments (calipers, micrometers, dial indicators, precision scales). Ability to maintain close tolerances (within 0.001”) for IDs, ODs, roundness, concentricity, and squareness. General knowledge and skill in using wire EDM and bandsaws. Proficient with hand, power, and pneumatic tools (pliers, screwdrivers, hammers, punches, chisels, saws, clamps, drills, impact hammers, abrasives, grinders, and rotary drills). Ability to communicate effectively with employees and management. Desired Qualifications: Experience with Siemens NX CAM Experience running DMG Mori equipment including DMU60, and DMC125 FD with Siemens 840D Control Experience with set-up and machining Additive Manufacturing (metal-LPBF) parts Mechanical Design Modeling Lean Manufacturing including 6S Education / Experience / General Requirements: High school diploma or equivalent. Minimum 3 years of experience in operation setup on CNC machines (required). Good vision abilities, including close vision, peripheral vision, and the ability to adjust focus (required). Ability to lift a maximum of 50 lbs. (over 25 lbs. with assistance) (required). REQUIRED: Applicants must be able to obtain and maintain a SECRET Security Clearance as required for this position. Ongoing employment is contingent upon maintaining the clearance. To obtain a SECRET Security Clearance US Citizenship is required

A leading provider of metal additive manufacturing (AM) solutions is seeking a Prototype Machinist to support its work in the aerospace, defense (ultra-secure), and space industries. The company focuses on the manufacture and certification of production flight hardware, driving industry growth through the integration of AM technology. Leveraging advanced engineering and manufacturing capabilities, they are pushing the boundaries of additive manufacturing in high-performance sectors. The Prototype Machinist will program and operate machinery to produce parts that conform to blueprints, following GD&T specifications. This includes working on 3-5 axis machines, Wire EDM, and various pneumatic abrasive tools. The role requires a strong mechanical aptitude, attention to detail, and the ability to deliver precision work. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs with Siemens NX CAM Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts.

Operation of automatic and/or manual wire bond equipment in a clean-room environment, to manufacture high-reliability microelectronic devices. Essential Duties and Responsibilities: * Read and interpret assembly instructions, drawings and work instruction processes. * Set up and run automatic and manual wire bond equipment * Ability to handle computers in order to fine tune machine programs. * Written tests for ESD + wirebond and ribbon bond requirements. * Use tools such as fine tipped tweezers, x-acto knives, vacuum pencils, dental probes, calipers, scales. * Knowledge of periodic machines certification for bond strengths. * Inspect and know the difference between an acceptable epoxy placement, die attach assembly, sub attached assembly and wire bond and ribbon bonds on a microelectronic device, in conformance with work instructions, drawings and specifications. * Inspect - to the drawings/specs and procedures - the devices for defects before starting the assembly and after finishing his/her part of the assembly. * Adhere to all ESD and other handling requirements. * Comply with all in-house training as identified in job specific family and or specific training plan. * Follow company 6S and continuous improvement (kaizen) objectives. * Perform all other duties, as assigned.

About the Company General Matter is enriching uranium in America. Our mission is to restore our country's ability to make nuclear fuel. Our fuel will help power AI, manufacturing, and other critical industries. It will power our next generation of reactors. Ultimately, it will power our national ambitions. We were incubated by Founders Fund, like Anduril and Palantir before us, and we are backed by top tier investors. Our lean, world-class team of engineers and operators is applying a first-principles approach to solving the problem of nuclear fuel production. We are a mission-driven company with a culture of urgency, accountability and transparency. Fabrication Build Specialist: The General Matter Development team is responsible for the fabrication and assembly of new product development, production tooling, and automation equipment for the buildup of the GM Production factory. Technicians work closely with the engineering team to support high-impact projects to grow the GM Production line, from development to a high-volume production system. Responsibilities: Fabricate piece parts to print using machine shop and fabrication equipment Building complex mechanical assemblies to a high standard, which may include, high and low-voltage wiring, and pneumatics Equipment operation including; forklifts, boom lifts, scissor lifts, and tractor trailers, for critical moves/lifts within the facility Basic Qualifications: High school diploma or equivalency certificate 4+ years of welding experience including AC/DC TIG, MIG (shielded and none shielded) 3+ years of experience in manual machine operations, Milling and Lathe. 3+ years of experience using fabrication tools; drill press, sanders, hand tools, cutting torch, plasma cutter, material saws. Preferred Skills and Experience: Able to read blueprints and complete basic shop math Able to read and interpret fluid or electrical schematics Able to work independently and problem-solve efficiently with minimal supervision Positive attitude and ability to work well on a team Willingness to provide constructive feedback to the engineering and production teams to improve tooling designs, processes, and parts Able to stay organized with strong attention to detail Precision hole drilling operations Proficient computer skills; comfortable with using email and the Microsoft Office suite CAD design skills using NX to design basic parts Laser tracking Experience Additional Requirements: Physical effort including standing, lifting, and carrying equipment up to 50 lbs. unassisted Must be able to work all required shift hours, overtime and/or weekends as needed Equal Opportunity Employer General Matter is an Equal Opportunity Employer; employment with General Matter is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Compensation and Benefits: Pay range: Technician /Level 1: $27.00 - $34.50/hour Technician /Level 2: $34.00 - $44.00/hour Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. Please note that the stated salary range is an estimate and may be adjusted based on market conditions, business needs, or other factors. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan.

The Division Manager of Stamping and CNC Turret Punch Press leads the promotion and sales of advanced stamping presses and turret punch presses for Amada America, Inc. This role involves developing strategic sales plans, expanding market share, planning production requirements, and supporting the entire sales group. The ideal candidate is a results-oriented leader with deep knowledge of metal forming technologies, proven sales expertise, and the ability to navigate complex B2B sales cycles. The Division Manager will focus on expanding market share, optimizing sales processes, developing educational and promotional material, training the sales force, and achieving annual sales targets through innovative strategies and strong team performance. ESSENTIAL FUNCTIONS Develop and execute comprehensive sales strategies for stamping presses and turret punch presses, including market analysis, pricing models, and competitive positioning to achieve or exceed quarterly and annual sales goals. Lead, mentor, and develop all Amada sales representatives, providing training on product features, technical specifications, and sales techniques to improve performance and individual quotas. Help to build and maintain key relationships with prospective and existing clients, conducting needs assessments, product demonstrations, and negotiations to secure sales contracts and long-term partnerships. Collaborate with marketing, product development, and engineering teams to align sales efforts with existing and with new product launches, custom solutions, and industry trends in metal stamping and punching technologies. Monitor sales metrics, pipeline health, and customer feedback using INFOR CRM tools to forecast and identify opportunities, and implement corrective actions for underperforming areas. Analyze market trends, competitor activities, and customer requirements to recommend product enhancements or expansions, ensuring the division remains competitive in the industrial machinery sector. Manage the division's budget, including sales incentives, travel expenses, and trade show participation, while optimizing resource allocation for maximum ROI. Ensure compliance with industry regulations, safety standards, and company policies related to equipment sales, installations, and after-sales support. Conduct regular training and sales evaluations to identify and ensure appropriate sales progress, and foster a high-performance culture and drive motivation. Represent the company at industry events, trade shows, and client meetings to promote brand visibility and generate leads for stamping and turret punch press solutions. REQUIREMENTS Strong technical background and understanding of stamping and punching operations. Strong technical background and understanding of tooling required for these machines. Strong ability to communicate and train the Amada sales and appllications groups Excellent organizational skills. Excellent communication and interpersonal skills. Strong problem solving and critical thinking skills. REPORTING RELATIONSHIP Vice President of Products & Engineering SUBORDINATE STAFF None at this time KNOWLEDGE Education & Experience: Bachelor's degree in a related field or 10 years within the industrial machinery or manufacturing sector, with at least 5 years in a leadership role focused on stamping presses. And a minimum of some understanding of turret punch presses, or similar metal forming technologies. Technical Knowledge: In-depth understanding of stamping press with some understanding of turret punch press operations, including servo-driven, hydraulic, mechanical, and CNC systems, fabrication processes, and industry standards (e.g., ISO, OSHA). Sales Expertise: Proven track record of achieving multi-million-dollar revenue targets, managing complex sales cycles, and closing high-value contracts in competitive markets. Leadership Skills: Demonstrated ability to lead, mentor, and motivate sales teams, with experience in performance management, talent development, and fostering a results-driven culture. Strategic Acumen: Strong skills in market analysis, competitive intelligence, sales forecasting, and CRM systems (e.g., Infor, Salesforce, SAP); experience with pricing strategies and ROI optimization. Communication and Relationship Building: Exceptional interpersonal, negotiation, and presentation skills; ability to engage with C-level executives, engineers, and procurement teams in manufacturing industries. Analytical Abilities: Proficiency in data-driven decision-making, using KPIs, sales analytics tools, and financial modeling to drive business growth. Travel and Other Requirements: Willingness to travel at least 50% for client meetings, trade shows, and team support; valid driver's license and passport required. Additional Competencies: Proficiency in Microsoft Office Suite and sales enablement software; knowledge of ERP systems and industry-specific software is a plus. MENTAL Ability to coordinate several priorities at one time. Ability to work harmoniously with others. Ability to accept and follow instructions. WORKING CONDITIONS LIFTING: Average Weight: 25 lb. Frequency: Daily

Job Description Now Hiring: Manual Machinist/Grinder - Huntington Beach, CA If you have experience in Precision Grinding (surface, cylindrical, JIG), we want to talk to you! Are you dependable, driven and passionate about precision work? Join a team where your skills directly support cutting edge technology for a global customer base. Family-owned for over 75 years, Precision Resource is a leading global supplier of precision metal components and assemblies using a fineblank production method. We provide solutions to quality, cost and production challenges for market-leading customers in industries such as automotive, heavy duty, medical, aerospace, electronics, tools, hardware, military and defense. Precision Resource offers: Benefits package including health, dental, life and vision insurance 401(k) with match and profit sharing Annual bonus based on division profitability Vacation and flexible paid holidays Wellness and Employee Assistance Programs Tuition reimbursement and paid training Work with an established team of long-term employees To learn more, visit ********************************** We are looking for a dedicated, flexible and mechanically capable machinist that would be willing to learn how to maintain tooling components to standards in maintenance books, detail drawings and verbal instructions as required to ensure tools are able to support production, quality and customer requirements. This is a great opportunity for an ambitious candidate who is looking to develop their knowledge of Tooling. Machine/grind high quality components for tools. Responsible for precision grinding (Cylindrical, Surface and JIG grinding) Inspect work visually or with appropriate measuring instruments. Perform applicable tool repair and maintenance, notifying Manager of required replacement stock. Ensure documentation and records are accurately maintained. Uses computer to accurately enter all Company required information. Participate in continual improvement through innovation and initiatives to improve safety, productivity, profitability and efficiency. Skills: 2+ years of grinding experience Thorough knowledge of machining manufacturing methods, techniques and related equipment Must be able to read and interpret drawings and specifications Basic level ERP systems. To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S. or protected individual as defined by ITAR (22 CFR §120.15). Precision Resource is an equal opportunity employer, M/F/D/V. Powered by JazzHR 5LVpOmk7fF

Job Description Job Responsibilities Primarily operate Manual Lathes & Bridgeport Manual Mills Ability to use measuring devices to verify part conformance Develop setups and processes to meet customer specifications Track tooling usage and inventory. Provide tooling needs as the job requires. Perform routine maintenance on machinery Maintain production logs (Work Orders, Inspection Logs, Part Counts, etc.) Requirements High School or GED Experience operating Manual Lathes & Mills or similar (5 years preferred) Familiarity with machine tools and equipment Ability to interpret drawings and blueprints and perform intermediate to advanced operation of Manual Lathes & Mills The pay for this position starts at a minimum of $24.76/hr. when the minimum job requirements are met and goes up based upon a candidate's experience and qualifications in a similar role. This position is also eligible for an annual discretionary bonus based on company performance. Why Choose Essex? Since 1947, Essex has been offering high quality parts and services to our customers. Our employees are what makes that happen so we do our best to take care of what matters most, by offering a competitive total rewards package for our employees. It's our commitment to making this a great place to work. Benefits Base Pay Bonus Opportunity Paid time off 10 company holidays Tuition Reimbursement Training & Development Retirement Benefits - 401k Tax-Advantaged Accounts Medical, dental, vision coverage The Guller Foundation, the charitable arm of Essex Industries, contributes to various local organization

Amca is building airplanes for the 21st century, starting by designing new hardware that flies on today's planes. Aviation was once humanity's boldest ambition, but the industry hasn't successfully built a new plane in 40 years. We don't think it has to be this way. Overview: You will work with tool makers and engineering teams to run prototype parts, develop tools, program prototype CNC machining operations, and roll out short run production parts to rapidly convert design ideas into prototypes. Responsibilities: Use in-depth familiarity of geometric dimensioning and tolerancing (GD&T) to machine tools, molds, and initial prototype parts based on desired final part geometries CNC Milling, Turning and Mill-Turn equipment programming and editing Creatively machine, fabricate and assemble plastic injection molds, prototype aerospace parts, short-run machined parts, tooling, and fixturing Perform manual milling, turning, grinding Go from rough engineering concept sketches to completed prototype parts, tools and fixtures as quickly as possible Provide and ensure adherence to tool and part Design for Manufacturability feedback Apply creative solutions to perform spur of the moment design and machining adjustments to achieve desired part outcomes in a fast-moving environment Assist with machine selection, initial machine setup and commissioning, and routine maintenance Qualifications: 5+ years of experience in machining, with a focus on aerospace or high-precision components. (Preference for 5-axis experience) Proficiency in CAM software (e.g., Mastercam, HyperMill, Esprit) and 3D CAD tools (e.g., SolidWorks, Siemens NX, Catia) Deep understanding of G-code, M-code, and CNC programming and editing Ability to learn and use a variety of software to observe, analyze, evaluate, and communicate pertinent information Strong knowledge of GD&T, blueprint interpretation, and tolerance stack-ups Hands-on experience with precision inspection tools (CMM, micrometers, calipers, dial indicators, depth and height gauges) Preferred experience: machining injection mold tooling, including wire and die sinking EDM This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or any individual who is granted U.S. permanent residence ("Green Card" holder); or any individual who is granted status as a "protected person" under 8 U.S.C 1324b(a)(3). The Advanced Manufacturing Company of America prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.

Details: A leading provider of metal additive manufacturing (AM) solutions is seeking a Prototype Machinist to support its work in the aerospace, defense (ultra-secure), and space industries. The company focuses on the manufacture and certification of production flight hardware, driving industry growth through the integration of AM technology. Leveraging advanced engineering and manufacturing capabilities, they are pushing the boundaries of additive manufacturing in high-performance sectors. The Prototype Machinist will program and operate machinery to produce parts that conform to blueprints, following GD&T specifications. This includes working on 3-5 axis machines, Wire EDM, and various pneumatic abrasive tools. The role requires a strong mechanical aptitude, attention to detail, and the ability to deliver precision work. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs with Siemens NX CAM Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts. Details: Required Skills: Ability to read and understand blueprints to meet specified dimensions (GD&T). Understanding of machine tool accuracies, fixture offsets, and tool offsets. Knowledge of cutting tool feeds, speeds, and tool life for aerospace hard turning or milling. Proficient in using precision measuring instruments (calipers, micrometers, dial indicators, precision scales). Ability to maintain close tolerances (within 0.001') for IDs, ODs, roundness, concentricity, and squareness. General knowledge and skill in using wire EDM and bandsaws. Proficient with hand, power, and pneumatic tools (pliers, screwdrivers, hammers, punches, chisels, saws, clamps, drills, impact hammers, abrasives, grinders, and rotary drills). Ability to communicate effectively with employees and management. Desired Qualifications: Experience running DMG Mori equipment including DMU60, and DMC125 FD with Siemens 840D Control Experience with set-up and machining Additive Manufacturing (metal-LPBF) parts Mechanical Design Modeling Lean Manufacturing including 6S Education / Experience / General Requirements: High school diploma or equivalent. Minimum 3 years of experience in operation setup on CNC machines (required). Good vision abilities, including close vision, peripheral vision, and the ability to adjust focus (required). Ability to lift a maximum of 50 lbs. (over 25 lbs. with assistance) (required). REQUIRED: Applicants must be able to obtain and maintain a SECRET Security Clearance as required for this position. Ongoing employment is contingent upon maintaining the clearance. To obtain a SECRET Security Clearance US Citizenship is required Compensation: $52-$58/hr #MCTA1

About Varda Low Earth orbit is open for business. Varda is accelerating the development of commercial space infrastructure, from in-orbit pharmaceutical processing to reliable and economical reentry capsules. From life-saving pharmaceuticals to more powerful fiber optics, there is a world of products used on Earth today that can only be manufactured in space. Varda is accelerating innovation in the orbital economy by creating both the products and infrastructure needed so space can directly benefit life on Earth. Our mission is to expand the economic bounds of humankind. Our team is uniquely suited to accomplishing this goal, with leadership and staff comprised of veterans from SpaceX, Blue Origin, major pharmaceutical companies and Silicon Valley. Varda was founded in January 2021 by Will Bruey and Delian Asparouhov with significant backing from world class investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital. Varda is headquartered in El Segundo, California, where we have offices and a production facility where our vehicles, equipment, and materials are built, integrated, and tested. Varda also has offices in Washington, DC and Huntsville, AL (coming soon). Join Varda, and work to create a bustling in-space ecosystem. About this Role We are looking for a Senior 5-Axis CNC Programmer to join our Manufacturing Team. In this role, you will be machining complex, flight-critical components with extreme precision-contributing directly to spacecraft that will leave Earth and return with life-changing materials manufactured in microgravity. This is a hands-on, high-impact role in a non-production, prototype-driven environment where you will work with cutting-edge equipment, collaborate directly with engineers, and operate with full ownership of your machining processes. You'll be surrounded by industry veterans in a culture that values humility, speed, and craftsmanship. Our Work Environment Autonomy and ownership. Responsible for print-to-part. Independent projects. One-off prototyping work. You rarely work on the same part twice. New 5-axis CNC machines. Premium tooling. Generous tooling and inspection budget. No need for personal tools. Single shift. No one else touches your machine. Clear aerospace environment. Pristine floors. Onsite in El Segundo, CA. 40-45 hours per week (over-time available with approvals). Flexible hours and generous benefits. Key Responsibilities (1) Precision Machining Machine complex aerospace components on 5-axis mills (Haas UMC1000 etc.) to tolerances of ±0.0005 in. Execute the full print-to-part workflow with full autonomy, including CAM programming, custom fixturing, setup, machine operation, and inspection. Machine exotic materials such as PEEK, Inconel, stainless steel, and carbon composite materials. Design and execute custom fixturing and work-holding solutions for prototype parts. (2) CAM Programming & Optimization Program CAM toolpaths using software such as Mastercam, HSMworks. Incorporate probing strategies and macros to reduce setup time and increase accuracy. Continuously refine feeds, speeds, and tooling strategies to minimize cycle times while maintaining aerospace-grade quality. (3) Process Ownership & Engineering Collaboration Take end-to-end ownership of machining processes, including raw material selection, programming, setup, machining, inspection, and documentation. Collaborate with engineering teams to provide Design for Manufacturability (DFM) feedback. Develop and standardize best practices to improve shop efficiency and knowledge sharing. Basic Qualifications 5+ years of experience programming and operating 5-axis vertical machining centers (e.g., Haas UMC-1000/750, DMG MORI DMU, or similar) producing tight-tolerance aerospace or flight-critical components. Proficiency in Mastercam for 3+2 and full simultaneous 5-axis toolpaths, including simulation and verification. Deep understanding of G-code/M-code and advanced CNC program editing. Experience machining exotic materials and applying GD&T principles. Hands-on experience with precision inspection tools. U.S. citizenship or lawful permanent residency (ITAR compliance). Preferred Skills and Experience 10+ years of CNC machining experience, primarily in 5-axis milling environments. 5+ years of Mastercam experience, including post customization and optimization. Skilled in custom workholding and fixture design, including modular dovetail, vacuum, and Lang-style clamping systems for small-lot prototype work. Demonstrated mentorship or leadership within a high-precision machining environment. Familiarity with CNC lathes, mill-turn, or live-tooling equipment - nice to have but not required. Pay Range Pay range: $40.00 - $60.00+ per hour Leveling and base salary is determined by job-related skills, education level, experience level, and job performance You will be eligible for long-term incentives in the form of stock options and/or long-term cash awards ITAR Requirements Varda, like all employers, must ensure that its employees working in the United States are lawfully authorized to work in the U.S. Additionally, our employees are exposed to and have access to certain export-controlled items. At present, some of our technology to which employees have access requires a license to be exported to individuals other than “U.S. Persons” as defined in U.S. export regulations. Because our employees are provided access to export-controlled items, our current policy is to only hire “U.S. persons” who are permitted to have access to our technology without an export license. “US person” means: U.S. citizen, U.S. lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3) (i.e., individual admitted to the U.S. as a refugee or granted asylum in the U.S.) Learn more about the ITAR here. Benefits Exciting team of professionals at the top of their field working by your side Equity in a fully funded space startup with potential for significant growth (interns excluded) 401(k) matching (interns excluded) Unlimited PTO (interns excluded) Health insurance, including Vision and Dental Lunch and snacks provided on site every day. Dinners provided twice a week. Maternity / Paternity leave (interns excluded) Varda Space Industries is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, martial status, mental or physical disability, or any other legally protected status. E-Verify Statement Varda Space Industries, Inc. participates in the U.S. Department of Homeland Security E-Verify program. The E-Verify program is an Internet-based employment eligibility verification system operated by the U.S. Citizenship and Immigration Services. Learn more about the E-Verify program. E-Verify Notice Right To Work Notice Read more Read more

Helpmates is looking for a General Machinist to independently operate 2 & 3 axis mills, lathes, gundrills, and hone machines to produce complex aerospace parts. The ideal candidate should be experienced with most conventional machines and their functions, demonstrating advanced cross-training flexibility. Schedule: 7:00 AM - 3:30 PM Pay Rate: $20.00 - $24.00/hr. Job Duties: Operate multiple machines, including mills and lathes, as part of a work cell Perform pre-checks before running machines Read blueprints, manuals, and job specs to understand part dimensions and steps Set up complex jobs on multiple machines without help (change jaws, tools, etc.) Use a sit-down forklift to move parts and load racks Use cranes and hoists to load/unload parts onto machines Run trial parts to check machine settings and programs Set up machines with proper tools, fixtures, and materials Adjust settings like speed, feed rate, and cutting depth as needed Monitor machine during operation and fix issues or errors Inspect finished parts to ensure they meet specifications Record time spent on tasks in the BAMC system Follow the department's continuous improvement process daily Cross train on other machines Sweep and maintain clean work area Keeping track of completed jobs Resolving machining problems with engineers Requirements Minimum 5 years experience on conventional machinist Mechanical skills Education/Certifications: High school diploma or GED required. Forklift, Crane Operator Certified, preferred but not required #HSCE