Machinist jobs in Memphis, TN - 26 jobs

Looking for Experienced CNC Machinist (with Lathe Experience) Summary: Sets up and operates conventional, special purpose, and computer numerical control (CNC) machines and machining centers to fabricate metallic and nonmetallic parts by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Interprets blueprints, sketches, drawings, manuals, specifications, routing, inspection and setup Selects, aligns, and secures holding fixtures and accessories on Selects, aligns, and secures cutting tools into tool holders and then installs tool assemblies on Loads and secures raw material on For manual operations, calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of For CNC operations, retrieves current revision machine control program and downloads to Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls as Unloads finished machined part from machine and deburrs as necessary to perform quality Verifies conformance of finished workpiece to specifications manually or through the use of a CMM / DCC-CMM. Enters required data into quality documentation and signs as Performs daily housekeeping and maintenance on assigned machine, auxiliary equipment, tooling and work area. Confers with engineers, programmers, inspectors, or maintenance personnel to resolve machining or assembly Competency: To perform the job successfully, an individual should demonstrate the following competencies: Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: High school diploma or general education degree (GED); VoTech Trade school graduate preferred. Completed a machining related apprenticeship program or equivalent combination of education and experience. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to present numerical data effectively and write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Math Ability: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to compute rate, ratio, and percent and to interpret bar graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations. Computer Skills: Possess Basic Computer skills. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision and Depth perception. ADDITIONAL NOTES ARCH Global Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Precision are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Ready to join our team? Apply today! Make sure to check your email for follow-ups. At MicroPort, we relentlessly strive to master every detail of our medical solutions with the purpose of prolonging and reshaping the lives of patients everywhere. We welcome motivated and talented people who want to join our dynamic and inclusive company, working together to deliver meaningful medical breakthroughs. In order to accomplish this, we hold true to our core values of Quality, Integrity, Accountability, Efficiency, Innovation, Aspiration, Dedication & Collaboration. Come and join Team MicroPort! This is a 2 Day 2nd Shift Position: Monday-Thursday, 3:30pm-2:00am Shift Premium: 11.1% (equates to 40 hours of work/week) Why You'll Love MicroPort You will find our team atmosphere challenging and rewarding. In addition to working with a world-class team, receiving a competitive base salary and bonus opportunities, our U.S. employees also enjoy the following benefits: Medical, Dental, Vision, Maternity Leave, Life Insurance, Short-Term Disability, Long-Term Disability, Bereavement, 401(k) (up to 4% match with vesting from day 1), PTO, Paid Holidays, Employee Assistance Program, Education Assistance...and more! At MicroPort, we care about our employees and encourage them to make healthy lifestyle choices and embrace wellness opportunities to maintain their very best health and wellbeing. Overall Summary As a Machinist, you will work with tools, fixtures, and machines to manufacture medical devices from setup to operation. A working knowledge of manual machines (i.e., mills, lathes, grinders) and the ability to operate computer numerical controlled (CNC) machines is utilized to produce large volumes of medical devices made from metals, plastics or other materials. Your duties will include: Machinist I: Operate multiple CNC/Manual machines such as mills and lathes. Manufacture medical devices that conform to specifications and all Quality Assurance requirements such as calipers, micrometers, coordinate measuring machines, optical comparators, air gages, surface roundness and finish analyzers. Attain production quotas such as daily goals, team goals, and labor standards. Complete device history records accurately with minimal errors. Enter required production data into MicroPort business systems. Perform routine preventive maintenance including area cleaning. Machinist II: Set-up and operate multiple CNC/Manual machines such as mills, lathes, and multi-axis CNC's. Perform auxiliary production operations such as, but not limited to inspection, metal finishing, robot operation, issuing / receiving raw materials and components. Work with Engineering staff to develop, prove out, and improve production processes. Communicate with peers, management, and other departments to ensure optimal efficiency is achieved. Train other machinists in core job duties. Senior Machinist: (only applies to internal candidates) Lead 6S projects and implement improvements to the process. Be proficient in the set up and operation of at least 3 different types of machines in 3 different work centers. Participate in team events, as well as individually contribute, to improve production efficiencies. Participate in the interview process for prospective machinists. Maintain a strong machining knowledge base to ensure optimal performance in any and all areas that present business needs. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. We might be a great match if: Machinists must be able to understand units of measure in both metric and English; must be able to convert between the two. A basic understanding of manufacturing machines, metal deburring, and plastic trimming is required. The ability to use measurement tools such as calipers, micrometers and other specialty tools used in machining processes is required. Minimal requirements for entry into the role are as follows: Some mechanical aptitude. Basic computer application skills. Basic blueprint reading skills. Basic metrology / measuring skills. Ability to read and write in English. Ability to operate within and sustain an organized work environment. Demonstrate company core values. Quality focused with a strong attention to detail. Strong work ethic with a sense of urgency. Motivated self-starter that works well independently or within teams. Your Education: Required: High School Diploma or GED Preferred: Technical School Training Your Experience: Machinist I: 2 years or CNC Technical School Completion. Machinist II: 4 years or 2 years & CNC Technical School Completion. Senior Machinist (only applies to internal candidates): 5 years or 3 years & CNC Technical School Completion.

Role Description This is a full-time on-site role for a Machinist based in Memphis, TN. The Machinist will be responsible for setting up, operating, and maintaining various types of machinery to produce precision parts and instruments. The role entails reading technical drawings, ensuring accurate measurements, maintaining high-quality standards, conducting machine maintenance, and troubleshooting equipment as necessary. The Machinist will also adhere to safety protocols and collaborate with team members to meet production goals efficiently. Qualifications Proficiency in operating and maintaining lathes, milling machines, and other industry-standard equipment Ability to read and interpret technical drawings, blueprints, and schematics Experience in machine maintenance, troubleshooting, and inspection for quality assurance Strong knowledge of safety procedures and best practices in a manufacturing or machining environment Excellent attention to detail and accuracy in measuring and cutting materials Good communication and teamwork skills to collaborate with colleagues and supervisors effectively Previous experience as a machinist or manufacturing technician preferred High school diploma or equivalent; vocational training or certification in machining or a related field is a plus

Machinist II Location: Memphis, TN - Onsite We build what the future runs on. Accelevation designs, manufactures and installs the physical infrastructure that powers today's most advanced technologies. We've grown over 440% in the last 18 months because we take ownership, solve hard problems, and build with purpose. Join us to build the future. Position Summary We are seeking a skilled machine operator to join our team in Miamisburg, OH. The Machine Operator will be responsible for setting up the equipment to cut various materials according to specifications. The ideal candidate will have experience working with machines. Key Responsibilities Maintain a safe and clean work environment Perform routine maintenance on saw equipment Minimum Requirements Previous experience as a Machine Operator or similar role HS Diploma or GED equivalent Strong attention to detail Ability to lift heavy materials Excellent communication skills Benefits Competitive salary Paid time off 401(k) retirement plan with company match Comprehensive health, dental, and vision insurance First time homebuyer program Collaborative, high-energy workplace Core Competencies Safety: Proactively fosters a culture of safety in our work environment. Inclusion: Appreciates and respects individuals from diverse backgrounds, identities, values, and cultures. Speed: Operates with a sense of urgency, recognizing the competitive advantage of being swift and responsive. Innovation: Consistently seeks opportunities to simplify processes and continuously improve. Judgement: Ability to exercise discretion and lead initiatives autonomously. Accountability: Ability to hold self and others to the highest of standards. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or carry up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles, toxic or caustic chemicals, risk of electrical shock, and explosives. The noise level in the work environment is very loud where ear protection is necessary. Equal Opportunity Employer Accelevation LLC is an equal opportunity employer - Inclusion is one of our core values, as we appreciate and respect individuals from diverse backgrounds, identities, values and cultures. We enthusiastically build teams that celebrate and embrace the contributions of everyone, fostering an environment of welcome and respect for all. As a part of our pre-hire process, we may conduct a background check. We use E-Verify to confirm the identity and employment eligibility of all new hires.

Responsible for setting up and operating CNC machine tools to produce high-quality precision parts for medical devices. Requires a strong understanding of machining processes, technical proficiency, and a commitment to meeting production and quality targets. Responsibilities: Set up and operate CNC machine tools including lathes, mills, grinders, and/or EDM (Electrical Discharge Machining) equipment. Interpret engineering drawings, blueprints, and specifications to determine machining requirements. Reads CNC programs using CAM (Computer-Aided Manufacturing) software such as Mastercam. Perform machine setups, tool changes, and adjustments to achieve desired part dimensions and surface finishes. Monitor machining processes and make necessary adjustments to ensure quality and efficiency. Conduct in-process inspections using precision measuring instruments (e.g., calipers, micrometers, height gauges). Maintain CNC machines and tooling, perform routine maintenance, and keep work area clean and organized. Adhere to safety guidelines, quality standards, and regulatory requirements applicable to medical device manufacturing. Qualifications: Associate degree or technical certification in CNC machining, manufacturing technology, or related field or equivalent experience. Typically 2-5 years of experience operating CNC machines in a manufacturing environment, preferably in medical device or aerospace industries. Some ability in CNC programming, setup, and operation. Strong knowledge of machining processes, tooling selection, and materials (e.g., stainless steel, titanium, plastics). Experience with CAM software and CAD/CAM integration. Attention to detail, problem-solving skills, and a proactive approach to continuous improvement. Effective communication skills and ability to work collaboratively in a team environment. Willingness to adapt to changing priorities and contribute to a fast-paced, dynamic manufacturing environment. Additional Notes: ARCH Medical Solutions is an Equal Opportunity Employer and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of Arch Medical Solutions are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee incumbent in this position. Employees will be required to follow any other job-related instruction and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skill, or abilities.

Under general supervision perform such duties as planning and performing all bench and required machine operations, including experimental work; constructing or making alterations and repairs to tools, jigs, fixtures, punches, dies, molds, gauges, templates or patterns involving a high degree of skill and thorough knowledge of tool building practices. TYPICAL DUTIES 1. Lay out work processes and sequences of operations required to fabricate specified tool. 2. Obtain necessary material as specified or required. 3. Perform all required machine and fabricating operations required to produce tool, including heat-treating annealing, hardening, grinding and sharpening. 4. Assemble dies and fixtures and take tryout tests. 5. Perform repair and alteration operations as specified. 6. Perform such precision inspection and tryout operations as may be specified for tool and equipment procured from outside sources. Perform other similar and less skilled work. QUALIFICATIONS 1. Must be able to work with complex drawings and to close tolerances. 2 Must be able to use shop mathematics and handbook formulas. 3. Must be able to use all types of precision inspection and checking equipment. 4 Must have successfully completed Client Training Program or be able to demonstrate equivalent knowledge and experience. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description A CNC Machinist II/Programmer is a skilled professional who operates and programs CNC machines to produce precision parts. Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. The right candidate will Write programs and modify existing ones for increases efficiency Utilize CAD/CAM Analyze job order and make calculations for programming Create, document and back up all programs. Update set-up sheets and tool lists as required Determine sequence of operation in a program Plans / performs complex disassembly and assembly work duties Performs setup and operation of various machine tools producing various close tolerance parts Assure quality and production requirements are met. As per travelers and blueprints, etc. Monitor all programs to make sure they follow blueprint instructions and safely and successfully complete the task. Completes forms, routers and related paperwork Keeps work area, tools and equipment clean and orderly Performs grit blasting, powder coating, operates the tool crib and completes all related tasks Performs a variety of non-destructive tests; takes measurements, records conformance/ nonconformance, on first piece, in process and upon final inspection. Reviews procedures, layouts, templates, jigs, incoming parts, assemblies and related tasks Reviews and assists with development of all job related JSA's/Work Instructions Performs clean up, removal of trash, coolant, oil, scrap, chips, etc. Moves equipment, and parts using the fork truck, crane, or other material handling equipment Assists other employees as directed by management or group leaders Is a safety minded worker who is drug free and dependable with an excellent attendance record Reports and/or corrects all unsafe conditions immediately Reports any safety incidents promptly. Mentors other employees as needed All other assigned duties What you will need High school diploma or GED required/ CNC programming preferred Reading / Writing skills (literacy) as required Mathematics - Knows advanced shop math, and other functions necessary for the job Technical machine tool training and/or significant previous related machining experience Completes all training and education deemed necessary by management Blueprint reading- interprets drawings Overhead crane and forklift experience Work from bills of material, purchasing lists, shipping documents and parts/hop supplies Ability to work in a job shop setting What we offer Competitive compensation Medical/dental/vision coverage Paid vacation Paid holiday time 401k with a company match Tuition reimbursement program What we do SMS group is an industrial equipment manufacturer for the steel industry. We design, build, and service equipment and steel plants across the globe with a strong technical services/machine shop network in North America. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test.

Job DescriptionDescription: At Indmar Marine Engines, we are dedicated to designing, manufacturing and selling high quality inboard marine engines that deliver a mix of unrivaled performance, meticulous craftsmanship and ground breaking innovations. We believe our employees and the different perspectives that they bring to the business are the driving force behind our success. Indmar Marine Engines is seeking a dependable, quality-focused individual to join our Machine Shop department. Experienced Machinists only need to apply, we will not train. This full-time position offers a competitive salary depending upon experience with a consistent daytime schedule. Benefits include health insurance, paid holidays, paid time off and a retirement savings plan with a company match. Punctuality and good attendance are crucial to success in this position. Work hours are 6:00 am - 4:30 pm, Monday - Thursday. Eligible for a $40.00 weekly attendance bonus. Candidate must have a valid driver's license and own reliable transportation. If selected, must complete pre-employment screenings which include a drug and background check. Indmar is an equal opportunity employer. POSITION SUMMARY: The Machinist is responsible for leading the Machine Shop which includes writing CNC programs, training machine operators and setting up and running CNC and manual machines. Requirements: DUTIES AND RESPONSIBILITIES: · Write CNC programs and performs run tests for functionality. · Creates setup instructions and other production documentation for CNC machines. · Work to improves existing programs. · Setup and operate multiple CNC milling machines and lathes. · Performs routine maintenance on machines, including preventive maintenance. · Analyze engineering designs and drawings for in-house manufacturability. · Trains CNC operators on CNC programs and blueprint readings. · Set up fixturing, tooling and work offsets. · Sets up and operates manual machine shop equipment (lathe, milling machines, and drill/tap machines. · Check finished parts with go or no-go gauges. · Checks and maintains coolant and lubrication levels for machining operations. · Clean and maintain work areas. · Other duties as assigned. KNOWLEDGE AND SKILLS: · The ability to read and understand blueprints. · Must be able to write and adjust programs for CNC machines. · Must have advanced math skills. · Must read and use precision instruments for quality control. · Must understand and utilize GD&T code programming. · Basic computer skills, including a working knowledge of Microsoft suite; Experience with an ERP system is preferred. · Must possess the ability to prioritize workload and manage projects effectively and efficiently. · Good communication skills in necessary to effectively communicate with leadership and members of other departments. EDUCATION AND WORK EXPERIENCE: · Technical degree or Machine Tool certification is required. · Minimum 5 years CNC experience in a manufacturing operation. · Experience with Miltronic VM 30 machines and experience with Fanuc controls is preferred. ENVIRONMENTAL CONDITIONS: Constant noise from machinery. PHYSICAL EFFORT: Must be able to lift 50 pounds consistently. SAFETY EQUIPMENT REQUIREMENTS: Safety glasses; hearing protection

Job Title: Bore Sizing/Precision Grinding/Honing CNC Machinist Employment Type: Full Time - Mon-Fri Flexible hours! We will take someone on 1st or 2nd shift. Salary based on experience. If you enjoy teamwork, technology, a great workplace culture and being developed to make an impact on our company, Camcraft is the place for you. Camcraft is a leading provider of high-precision machined components for on and off-road vehicles, hydraulic controls, aerospace and electric vehicles. Many of our products help our customers improve fuel economy and reduce emissions. Help Camcraft propel the world as we propel your career! Why do great people join the Camcraft team and spend much of their career with us? They are a testament to our positive culture, relentless investment, and opportunity for growth: We treat people with respect, as we are all created in God's image. We are a diverse family that cares for each other. We practice open, listening leadership. We enjoy regular social events together. We make our community and our planet better. We are committed to excellence and continuous improvement. We help global aerospace, automotive, & hydraulic customers move the world & explore the universe. We invest in our people, our facilities, and manufacturing technology. We provide opportunities for talented, bright, eager people. We were honored as one of Chicago's Best and Brightest companies to work for in 2017 and Industry Week Best Plant in 2015. Qualifications General Requirements: The purpose is to perform a set up for a given part and produce high precision components according to the customer's print, specifications, and guidelines. Produce components according to the rate determined by Camcraft. May use one or more various types of CNC, manual grinders and vertical and horizontal hones. Start the machine and perform start up inspection Ensure that proper gauging is being used for the job intended to run Read and understand blueprint Produce precision components according to the blueprint Produce precision components at rate Perform all necessary part inspection using gauging instruments specified in the inspection sheet Perform necessary statistical process control Clean the workstation, check machine fluid levels and refill as needed Perform set up for a new or an existing component to be honed Obtain necessary tooling Troubleshoot as needed Understands job priority based on department schedule Report department's performance and issues to the Bore Sizing department manager Follows established safety practices and requirements pertaining to the type of work involved. Benefits: We offer medical (PPO), health saving account, flexible spending, dependent flex spending, dental, vision, paid vacation, paid holidays, short/long term disability, 401K with company match, life insurance/AD&D, accident plan, critical illness plan, hospital indemnity plan, legal plan and much more!

The CNC Machinist III will operate, set up, and program jobs on CNC equipment (i.e., Mills, Lathes, Swiss, EDM, and mill-turn) to manufacture medical components from raw materials. The CNC Machinist III will have expertise on a specific type of equipment or be well-versed in multiple types of equipment. Responsibilities Create programs for CNC equipment using CAD/CAM software. Develop CNC machining processes by selecting the tools, speeds, and feeds. Set-up and operate machines. Interpret blueprints, including GD&T. Partner with Engineering Team. Design fixtures, tools, and jigs as needed. Effectively troubleshoot machining issues in a machining environment. Inspect product per the inspection plans. Deburr parts, if needed. Participate in ongoing process improvements Report any non-conforming parts to Supervisor. Closely monitor machine operation, detect malfunctions or out of tolerance features, make any necessary adjustments. Maintain machining area for cleanliness and minor preventive maintenance (i.e., Coolant levels) Record production through Job Boss system. Support the EMS Quality Policy and Quality Objectives. Perform other duties as assigned. Requirements A minimum of a High School diploma or general education degree (GED) plus Machining Certification with 7+ years of CNC experience is required, or an equivalent combination of education and experience. Have at least a general knowledge of machining techniques on the equipment assigned. Be familiar with material types and general properties of materials related to assignments. Must have a working knowledge of measuring equipment including mics, calipers, comparators, and indicators. Be very familiar with drawing terms and be able to interpret feature requirements. Be able to read and understand the Router. Understand the Data Collection System. Have an understanding of relevant Safety requirements. Must be able to work in a team environment. Must be able to speak, read and write in the English language. Restrictions Ability to bend, stoop, grip, reach and lift up to 40 lbs. on a repetitive basis. Able to stand the majority of the shift to perform duties. Search Firm Representatives Please read carefully EMS is not accepting unsolicited assistance from search firms for our current employment opportunities. Please, no phone calls or emails. Please read carefully before applying I certify that all the information on this application, my resume, or any supporting documents I may present during any interview is and will be true, complete and accurate, to the best of my knowledge. I understand that any falsification, misrepresentation, or omission of any information may result in disqualification from further consideration for employment or, if employed, disciplinary action, up to and including immediate dismissal, regardless of when such information is discovered. The Company considers this Application for Employment to be a part of the personnel record. THIS COMPANY IS AN AT-WILL EMPLOYER WHERE ALLOWED BY APPLICABLE STATE LAW. THIS MEANS THAT REGARDLESS OF ANY PROVISION IN THIS APPLICATION, IF HIRED, THE COMPANY OR I MAY TERMINATE THE EMPLOYMENT RELATIONSHIP AT ANY TIME, FOR ANY REASON, WITH OR WITHOUT CAUSE OR NOTICE. NOTHING IN THIS APPLICATION OR IN ANY DOCUMENT OR STATEMENT, WRITTEN OR ORAL, SHALL LIMIT THE RIGHT TO TERMINATE EMPLOYMENT AT-WILL. I UNDERSTAND THAT NO COMPANY EMPLOYEE OR REPRESENTATIVE HAS THE AUTHORITY TO ENTER INTO A CONTRACT REGARDING DURATION OF TERMS AND CONDITIONS OF EMPLOYMENT OTHER THAN THE PRESIDENT/CEO OF THE COMPANY AND THEN ONLY BY MEANS OF A WRITTEN CONTRACT SIGNED BY THE PRESIDENT/CEO. I authorize the Company and/or its agents to confirm all statements contained in this application and/or resume as it relates to the position I am seeking, to the extent permitted by federal, state, or local law. Federal law and some states require a separate disclosure and consent when obtaining background reports from a consumer reporting agency. I understand I will be asked to complete any requisite consent forms for the background check which may be required by federal, state and/or local law. I agree to sign these forms and understand that my offer of employment may be conditional upon the background check. I AUTHORIZE AND CONSENT TO, WITHOUT RESERVATION, ANY PARTY OR AGENCY CONTACTED BY THIS EMPLOYER (INCLUDING ANY AND ALL PRIOR EMPLOYERS OF MINE) TO FURNISH INFORMATION REGARDING MY PREVIOUS EMPLOYMENT HISTORY AND/OR ANY OF THE ABOVE-MENTIONED INFORMATION. I hereby release, discharge, and hold harmless, to the extent permitted by federal, state, and local law, any party delivering information to the Company pursuant to this authorization from any liability, claims, charges, or causes of action which I may have as a result of the delivery or disclosure of the above requested information. I hereby release from liability the Company for seeking such information and all other persons, corporations, or organizations furnishing such information. If hired by the Company, I understand that I will be required to provide genuine documentation establishing my identity and eligibility to be legally employed in the United States by this Company as required by the Immigration Reform and Control Act of 1986. I also understand this Company employs only individuals who are legally eligible to work in the United States.

Why join us? At Corelle Brands , we are passionate about products that bring joy and ease to our customers in cooking and sharing food with family and friends. We're looking for candidates who are smart, curious, creative, push the limits of what's possible and are passionate about our brands. We embrace and respect diverse backgrounds, and welcome new ideas. Our continuous focus on growth and innovation means you will become part of a global company that offers challenging opportunities, rewards excellence, and combines your individual expertise to achieve a higher level of shared success. We operate within a fast-paced, team-oriented, rewarding work environment that allows our employees to develop and thrive. We offer competitive compensation and comprehensive benefits within a flexible, creative, and progressive work setting. Join Instant Brands and become a part of our story. Everyone matters here. Position Summary: Under Minimal supervision, machinists set up and operate manually controlled machines such as vertical mills, metal lathes, and surface grinders to ensure proper repair of plastic injection molds and related tooling. Also, needs to be skilled in bench work and light fabrication. Candidate needs to be able to read drawings and fabricate jigs and fixtures. Work includes repair and preparation of injection molds and related tooling for production runs. Knowledge of Pro Trak KMX a plus. Primary Responsibilities: Ensure all mold shop equipment is in proper working order before using them. Notify supervisor if machinery and or tools are not working properly. Determines accurate and efficient methods to repair molds. Assist in documenting the movement of molds in and out of the facility. Keep good records for efficient retrieval and accurate reporting. Disassemble, clean, and reassemble molds and all components of injection molds as well as changing their components. Performs mold repair work on cores and cavities due to damage or wear. Repair and or build custom jigs and assembly fixtures as needed. Use various measuring instruments like calipers, dial indicators, micrometers to verify tool and part compliance. Maintain proper inventory of spare parts. Maintain mold history record including preventive maintenance and repairs. Performs mold repair personally, proficiently operates all tool room equipment and machinery. Ensures all activity/operations are performed according to company safety rules/regulations. Create work orders for all auxiliary equipment repairs. Proficiency in the set-up and operation of tool room equipment. Required Qualifications: 4 years of preferred vocational degree or 4 years of job shop experience. You must be proficient when reading drawings and blueprints. Ability to understand and carry out Standardized Work Instructions Understand ratios, percentages, fractions, basic trigonometry, Demonstrates good judgment and decision making. Complex Problem Solving; Identify complex problems and review related information to develop and evaluate options and implement solutions. Must pass Corelle Brands pre-employment physical test. Ability to move about on the production floor for a minimum of 8 hours per shift. Ability to regularly lift and or move up to 10 pounds and occasionally lift and or move up to 45 pounds. If over 45 lbs., a team lift is required. Constantly manipulate and operate tools, objects and controls while repairing. Corelle Brands Our Values: We drive results and create value together One Team - We love our Consumers We “ Wow ” Them - We challenge each other, always have an Open Mindset and welcome new ideas - We are a Global Company, and we think globally - We have Integrity in all that we do. Corelle Brands is an equal opportunity employer with a strong commitment to diversity and inclusion. We prohibit discrimination based on race, color, religion, sex, age, national origin, sexual orientation, gender identity or expression, disability, veteran status, marital status, or any other legally protected status. Members of all underrepresented groups are encouraged to apply.

Job Description Do you want to work in a clean, air-conditioned, heated, state-of-the-art automated manufacturing facility with a great working environment? Feuer powertrain North America: We are the US subsidiary of a German-based leading independent producer of crankshafts, "the heart of every engine." In Europe, we produce crankshafts for Mercedes-Benz, BMW, VW, Audi, Renault, Jaguar, Bentley, Rolls-Royce, Aston Martin, Ferrari, Maserati, Lamborghini and many more. In North America, we produce crankshafts for GM, Ford, Mercury and many more. We are now expanding our plant to a new 2nd line. We are hiring immediately. Pay, Benefits, Working Conditions, Training, Advancement: Pay- We pay $15 to $35 per hour based on experience. Benefits-We pay 85% of our employees' health, dental and vision insurance and 100% of life insurance and short-term disability. We have a 401k with a 5% match. We provide PTO available after 30 days of employment. Working Conditions: Clean, air-conditioned, heated, state-of-the-art automated manufacturing environment. A great working environment and place to work. Training- For employees willing to work hard and move up, we offer 7 levels of training and 7 pay levels for advancement. Advancement: We prefer to train and promote from within the company. CNC Operator POSITION SUMMARY: The CNC Operator will program, set-up, and operate CNC processing machines for the manufacture of finished crankshaft and crankshaft accessories, such as counterweight parts and change parts. KEY RESPONSIBILITIES: Determine processing sequence and formulate within program language. Enter processing data, simulate processing, optimize program, and save progress. Create tool offset list, complete tool changes, and conduct off-sets. Prepare, complete, measure, and install work - clamping equipment and tools. Test program on a step-by-step basis, check first part, correct process if needed. Alter land test loader. Training of new personnel. Document problems and arrange corrective action Loading and unloading of machine. Monitor work processes, conduct service work, housekeeping/cleaning duties, etc. Control dimensional accuracy, condition, and completeness of work pieces Develop and implement ways to do complex and difficult rework on work pieces Any and all other duties assigned by the supervisor MINIMUM QUALIFICATIONS: 2+ years' experience operating CNC equipment (lathes, mills, etc.) Experience with Tooling, Off-Sets, and Tool Changes Experience using Measuring Tools such as micrometers, calipers, etc. Capable of reading blueprints Fundamental understanding of GD&T (Geometric Dimensioning and Tolerancing) preferred. High School Diploma, apprenticeship in CNC, or equivalent years of relevant experience Familiarity with any of the following machining processes: lathes, mills, drills, bore, tapping, heat treat, grinding, balancing, rolling, polishing, etc. Understanding of crankshaft processing or Siemens 840D experience is a plus. Able to bend, stoop, grip, reach and lift up to a minimum of 40 lbs. on a repetitive basis. Able to stand the majority of the shift to perform duties (12 hours max) FEUER powertrain North America, Inc. is an Equal Opportunity Employer (EOE). Our employment decisions are made without regard to race, color, religion, sex, marital status, pregnancy, national origin, citizenship, age, physical or mental disability, genetic information, sexual orientation, veteran status, military status, or any other characteristic or status protected by federal, state, or local law. If you need assistance or an accommodation during the application process due to a disability, it is available upon request. Job Posted by ApplicantPro

The CNC Operator is responsible for setting up and operating CNC mills and lathes to produce high-quality parts according to specifications. Operators will prepare machines, monitor production, and inspect finished components to ensure compliance with quality requirements. A Day In The Life Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: Preparing and operating CNC machines for tasks such as drilling and milling Reading and interpreting blueprints and mechanical drawings Loading raw materials and parts onto machines Performing test runs and adjusting settings to meet specifications Monitoring machine operations and adjusting for optimal results Inspecting and measuring finished products for accuracy and quality Performing routine maintenance and daily checks on equipment Maintaining accurate job logs, routers, and related documentation Keeping work areas clean and organized in compliance with safety standards Supporting team scheduling, training, and workflow coordination as needed What will help you thrive in this role? High School Diploma or equivalent (required) Certificate or diploma from a trade school (preferred) Proven experience operating CNC machinery Proficiency with precision measurement tools Ability to read and interpret technical documents and drawings Strong mechanical aptitude and math skills Attention to detail and a results-driven approach Good communication and teamwork skills Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Description Role Description This is a full-time on-site role for a Machinist based in Memphis, TN. The Machinist will be responsible for setting up, operating, and maintaining various types of machinery to produce precision parts and instruments. The role entails reading technical drawings, ensuring accurate measurements, maintaining high-quality standards, conducting machine maintenance, and troubleshooting equipment as necessary. The Machinist will also adhere to safety protocols and collaborate with team members to meet production goals efficiently. Qualifications Proficiency in operating and maintaining lathes, milling machines, and other industry-standard equipment Ability to read and interpret technical drawings, blueprints, and schematics Experience in machine maintenance, troubleshooting, and inspection for quality assurance Strong knowledge of safety procedures and best practices in a manufacturing or machining environment Excellent attention to detail and accuracy in measuring and cutting materials Good communication and teamwork skills to collaborate with colleagues and supervisors effectively Previous experience as a machinist or manufacturing technician preferred High school diploma or equivalent; vocational training or certification in machining or a related field is a plus

Responsible for setting up and operating CNC machine tools to produce high-quality precision parts for medical devices. Requires a strong understanding of machining processes, technical proficiency, and a commitment to meeting production and quality targets. Responsibilities: Set up and operate CNC machine tools including lathes, mills, grinders, and/or EDM (Electrical Discharge Machining) equipment. Interpret engineering drawings, blueprints, and specifications to determine machining requirements. Reads CNC programs using CAM (Computer-Aided Manufacturing) software such as Mastercam. Perform machine setups, tool changes, and adjustments to achieve desired part dimensions and surface finishes. Monitor machining processes and make necessary adjustments to ensure quality and efficiency. Conduct in-process inspections using precision measuring instruments (e.g., calipers, micrometers, height gauges). Maintain CNC machines and tooling, perform routine maintenance, and keep work area clean and organized. Adhere to safety guidelines, quality standards, and regulatory requirements applicable to medical device manufacturing. Qualifications: Associate degree or technical certification in CNC machining, manufacturing technology, or related field or equivalent experience. Typically 2-5 years of experience operating CNC machines in a manufacturing environment, preferably in medical device or aerospace industries. Some ability in CNC programming, setup, and operation. Strong knowledge of machining processes, tooling selection, and materials (e.g., stainless steel, titanium, plastics). Experience with CAM software and CAD/CAM integration. Attention to detail, problem-solving skills, and a proactive approach to continuous improvement. Effective communication skills and ability to work collaboratively in a team environment. Willingness to adapt to changing priorities and contribute to a fast-paced, dynamic manufacturing environment. Additional Notes: ARCH Medical Solutions is an Equal Opportunity Employer and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of Arch Medical Solutions are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee incumbent in this position. Employees will be required to follow any other job-related instruction and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skill, or abilities.

A CNC Machinist II/Programmer is a skilled professional who operates and programs CNC machines to produce precision parts. Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. The right candidate will Write programs and modify existing ones for increases efficiency Utilize CAD/CAM Analyze job order and make calculations for programming Create, document and back up all programs. Update set-up sheets and tool lists as required Determine sequence of operation in a program Plans / performs complex disassembly and assembly work duties Performs setup and operation of various machine tools producing various close tolerance parts Assure quality and production requirements are met. As per travelers and blueprints, etc. Monitor all programs to make sure they follow blueprint instructions and safely and successfully complete the task. Completes forms, routers and related paperwork Keeps work area, tools and equipment clean and orderly Performs grit blasting, powder coating, operates the tool crib and completes all related tasks Performs a variety of non-destructive tests; takes measurements, records conformance/ nonconformance, on first piece, in process and upon final inspection. Reviews procedures, layouts, templates, jigs, incoming parts, assemblies and related tasks Reviews and assists with development of all job related JSA's/Work Instructions Performs clean up, removal of trash, coolant, oil, scrap, chips, etc. Moves equipment, and parts using the fork truck, crane, or other material handling equipment Assists other employees as directed by management or group leaders Is a safety minded worker who is drug free and dependable with an excellent attendance record Reports and/or corrects all unsafe conditions immediately Reports any safety incidents promptly. Mentors other employees as needed All other assigned duties What you will need High school diploma or GED required/ CNC programming preferred Reading / Writing skills (literacy) as required Mathematics - Knows advanced shop math, and other functions necessary for the job Technical machine tool training and/or significant previous related machining experience Completes all training and education deemed necessary by management Blueprint reading- interprets drawings Overhead crane and forklift experience Work from bills of material, purchasing lists, shipping documents and parts/hop supplies Ability to work in a job shop setting What we offer Competitive compensation Medical/dental/vision coverage Paid vacation Paid holiday time 401k with a company match Tuition reimbursement program What we do SMS group is an industrial equipment manufacturer for the steel industry. We design, build, and service equipment and steel plants across the globe with a strong technical services/machine shop network in North America. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test.

The CNC Machinist II will operate and perform simple setups on CNC equipment (i.e., Mills, Lathes, Swiss, EDM, Mill/Turn) to manufacture medical components from raw materials. Responsibilities Sets up machines to run correctly and consistently. Operates at least 2 machines effectively. Interpret blueprints, including GD&T. Solve machining issues common in a machining environment. Inspect product per the inspection plans. Deburr parts, if needed. Participate in ongoing process improvements Report any non-conforming parts to Supervisor. Closely monitor machine operation, detect malfunctions or out of tolerance features, make any necessary adjustments. Maintain machining area for cleanliness and minor preventive maintenance (i.e., Coolant levels) Record production through Job Boss system. Check to ensure all documentation (routers, inspection sheets, scrap tickets, etc.) is filled in correctly and completely following Good Documentation Practices (GDP). Take pride in your workmanship and make it your goal to produce a quality product every time. Support the EMS Quality Policy and Quality Objectives. Perform other duties as assigned. Requirements A minimum of a High School diploma or general education degree (GED) plus Machining Certification with 3+ years of CNC experience is required, or an equivalent combination of education and experience. Solid knowledge of machining techniques on the equipment assigned. Be familiar with material types and general properties of materials related to assignments. Must have a working knowledge of measuring equipment including mics, calipers, comparators, and indicators. Able to read and interpret blueprint drawings and features. Be able to read and understand the Router. Understand the Data Collection System. Have an understanding of relevant Safety requirements. Must be able to work in a team environment. Must be able to speak, read and write in the English language Ability to bend, stoop, grip, reach and lift up to 40 lbs. on a repetitive basis. Able to stand the majority of the shift to perform duties. Search Firm Representatives Please read carefully EMS is not accepting unsolicited assistance from search firms for our current employment opportunities. Please, no phone calls or emails. Please read carefully before applying I certify that all the information on this application, my resume, or any supporting documents I may present during any interview is and will be true, complete and accurate, to the best of my knowledge. I understand that any falsification, misrepresentation, or omission of any information may result in disqualification from further consideration for employment or, if employed, disciplinary action, up to and including immediate dismissal, regardless of when such information is discovered. The Company considers this Application for Employment to be a part of the personnel record. THIS COMPANY IS AN AT-WILL EMPLOYER WHERE ALLOWED BY APPLICABLE STATE LAW. THIS MEANS THAT REGARDLESS OF ANY PROVISION IN THIS APPLICATION, IF HIRED, THE COMPANY OR I MAY TERMINATE THE EMPLOYMENT RELATIONSHIP AT ANY TIME, FOR ANY REASON, WITH OR WITHOUT CAUSE OR NOTICE. NOTHING IN THIS APPLICATION OR IN ANY DOCUMENT OR STATEMENT, WRITTEN OR ORAL, SHALL LIMIT THE RIGHT TO TERMINATE EMPLOYMENT AT-WILL. I UNDERSTAND THAT NO COMPANY EMPLOYEE OR REPRESENTATIVE HAS THE AUTHORITY TO ENTER INTO A CONTRACT REGARDING DURATION OF TERMS AND CONDITIONS OF EMPLOYMENT OTHER THAN THE PRESIDENT/CEO OF THE COMPANY AND THEN ONLY BY MEANS OF A WRITTEN CONTRACT SIGNED BY THE PRESIDENT/CEO. I authorize the Company and/or its agents to confirm all statements contained in this application and/or resume as it relates to the position I am seeking, to the extent permitted by federal, state, or local law. Federal law and some states require a separate disclosure and consent when obtaining background reports from a consumer reporting agency. I understand I will be asked to complete any requisite consent forms for the background check which may be required by federal, state and/or local law. I agree to sign these forms and understand that my offer of employment may be conditional upon the background check. I AUTHORIZE AND CONSENT TO, WITHOUT RESERVATION, ANY PARTY OR AGENCY CONTACTED BY THIS EMPLOYER (INCLUDING ANY AND ALL PRIOR EMPLOYERS OF MINE) TO FURNISH INFORMATION REGARDING MY PREVIOUS EMPLOYMENT HISTORY AND/OR ANY OF THE ABOVE-MENTIONED INFORMATION. I hereby release, discharge, and hold harmless, to the extent permitted by federal, state, and local law, any party delivering information to the Company pursuant to this authorization from any liability, claims, charges, or causes of action which I may have as a result of the delivery or disclosure of the above requested information. I hereby release from liability the Company for seeking such information and all other persons, corporations, or organizations furnishing such information. If hired by the Company, I understand that I will be required to provide genuine documentation establishing my identity and eligibility to be legally employed in the United States by this Company as required by the Immigration Reform and Control Act of 1986. I also understand this Company employs only individuals who are legally eligible to work in the United States.

Why join us? At Corelle Brands, we are passionate about products that bring joy and ease to our customers in cooking and sharing food with family and friends. We're looking for candidates who are smart, curious, creative, push the limits of what's possible and are passionate about our brands. We embrace and respect diverse backgrounds, and welcome new ideas. Our continuous focus on growth and innovation means you will become part of a global company that offers challenging opportunities, rewards excellence, and combines your individual expertise to achieve a higher level of shared success. We operate within a fast-paced, team-oriented, rewarding work environment that allows our employees to develop and thrive. We offer competitive compensation and comprehensive benefits within a flexible, creative, and progressive work setting. Join Instant Brands and become a part of our story. Everyone matters here. Position Summary: Under Minimal supervision, machinists set up and operate manually controlled machines such as vertical mills, metal lathes, and surface grinders to ensure proper repair of plastic injection molds and related tooling. Also, needs to be skilled in bench work and light fabrication. Candidate needs to be able to read drawings and fabricate jigs and fixtures. Work includes repair and preparation of injection molds and related tooling for production runs. Knowledge of Pro Trak KMX a plus. Primary Responsibilities: Ensure all mold shop equipment is in proper working order before using them. Notify supervisor if machinery and or tools are not working properly. Determines accurate and efficient methods to repair molds. Assist in documenting the movement of molds in and out of the facility. Keep good records for efficient retrieval and accurate reporting. Disassemble, clean, and reassemble molds and all components of injection molds as well as changing their components. Performs mold repair work on cores and cavities due to damage or wear. Repair and or build custom jigs and assembly fixtures as needed. Use various measuring instruments like calipers, dial indicators, micrometers to verify tool and part compliance. Maintain proper inventory of spare parts. Maintain mold history record including preventive maintenance and repairs. Performs mold repair personally, proficiently operates all tool room equipment and machinery. Ensures all activity/operations are performed according to company safety rules/regulations. Create work orders for all auxiliary equipment repairs. Proficiency in the set-up and operation of tool room equipment. Required Qualifications: 4 years of preferred vocational degree or 4 years of job shop experience. You must be proficient when reading drawings and blueprints. Ability to understand and carry out Standardized Work Instructions Understand ratios, percentages, fractions, basic trigonometry, Demonstrates good judgment and decision making. Complex Problem Solving; Identify complex problems and review related information to develop and evaluate options and implement solutions. Must pass Corelle Brands pre-employment physical test. Ability to move about on the production floor for a minimum of 8 hours per shift. Ability to regularly lift and or move up to 10 pounds and occasionally lift and or move up to 45 pounds. If over 45 lbs., a team lift is required. Constantly manipulate and operate tools, objects and controls while repairing. Corelle Brands Our Values: We drive results and create value together One Team - We love our Consumers We “Wow” Them - We challenge each other, always have an Open Mindset and welcome new ideas - We are a Global Company, and we think globally - We have Integrity in all that we do. Corelle Brands is an equal opportunity employer with a strong commitment to diversity and inclusion. We prohibit discrimination based on race, color, religion, sex, age, national origin, sexual orientation, gender identity or expression, disability, veteran status, marital status, or any other legally protected status. Members of all underrepresented groups are encouraged to apply. 3:00pm - 11:30pm

The CNC Machinist I will operate and perform simple setups on CNC equipment (i.e. Mills, Lathes, Swiss, EDM, Mill/Turn) to manufacture medical components from raw materials. Responsibilities Operates machines. Will be required to run more than 1 machine at a time. Interpret blueprints, including GD&T. Solve basic machining issues common in a machining environment. Inspect product per the inspection plan. Deburr parts, if needed. Inspect cutting tools for sharpness and tool life. Report damaged or spent tooling to Supervisor or machine shop manager for repair/replace. Report any non-conforming parts to Supervisor. Closely monitor machine operation, detect malfunctions or out of tolerance features, make any necessary adjustments. Maintain machining area for cleanliness and minor preventive maintenance (i.e., Coolant levels). Participate in ongoing process improvements. Record production through Job Boss system. Check to ensure all documentation (routers, inspection sheets, scrap tickets, etc.) is filled in correctly and completely following Good Documentation Practices (GDP). Take pride in your workmanship and make it your goal to produce a quality product every time. Support the EMS Quality Policy and Quality Objectives. Perform other duties as assigned. Requirements A minimum of a High School diploma or general education degree (GED) plus Machining Certification with 1+ years of CNC experience is required, or an equivalent combination of education and experience Have at least a general knowledge of machining techniques on the equipment assigned. Be familiar with material types and general properties of materials related to assignments. Must have a working knowledge of measuring equipment including mics, calipers, comparators, and indicators. Be very familiar with drawing terms and be able to interpret feature requirements. Be able to read and understand the Router. Understand the Data Collection System. Have an understanding of relevant Safety requirements. Must be able to work in a team environment. Must be able to speak, read and write in the English language. Search Firm Representatives Please read carefully EMS is not accepting unsolicited assistance from search firms for our current employment opportunities. Please, no phone calls or emails. Please read carefully before applying I certify that all the information on this application, my resume, or any supporting documents I may present during any interview is and will be true, complete and accurate, to the best of my knowledge. I understand that any falsification, misrepresentation, or omission of any information may result in disqualification from further consideration for employment or, if employed, disciplinary action, up to and including immediate dismissal, regardless of when such information is discovered. The Company considers this Application for Employment to be a part of the personnel record. THIS COMPANY IS AN AT-WILL EMPLOYER WHERE ALLOWED BY APPLICABLE STATE LAW. THIS MEANS THAT REGARDLESS OF ANY PROVISION IN THIS APPLICATION, IF HIRED, THE COMPANY OR I MAY TERMINATE THE EMPLOYMENT RELATIONSHIP AT ANY TIME, FOR ANY REASON, WITH OR WITHOUT CAUSE OR NOTICE. NOTHING IN THIS APPLICATION OR IN ANY DOCUMENT OR STATEMENT, WRITTEN OR ORAL, SHALL LIMIT THE RIGHT TO TERMINATE EMPLOYMENT AT-WILL. I UNDERSTAND THAT NO COMPANY EMPLOYEE OR REPRESENTATIVE HAS THE AUTHORITY TO ENTER INTO A CONTRACT REGARDING DURATION OF TERMS AND CONDITIONS OF EMPLOYMENT OTHER THAN THE PRESIDENT/CEO OF THE COMPANY AND THEN ONLY BY MEANS OF A WRITTEN CONTRACT SIGNED BY THE PRESIDENT/CEO. I authorize the Company and/or its agents to confirm all statements contained in this application and/or resume as it relates to the position I am seeking, to the extent permitted by federal, state, or local law. Federal law and some states require a separate disclosure and consent when obtaining background reports from a consumer reporting agency. I understand I will be asked to complete any requisite consent forms for the background check which may be required by federal, state and/or local law. I agree to sign these forms and understand that my offer of employment may be conditional upon the background check. I AUTHORIZE AND CONSENT TO, WITHOUT RESERVATION, ANY PARTY OR AGENCY CONTACTED BY THIS EMPLOYER (INCLUDING ANY AND ALL PRIOR EMPLOYERS OF MINE) TO FURNISH INFORMATION REGARDING MY PREVIOUS EMPLOYMENT HISTORY AND/OR ANY OF THE ABOVE-MENTIONED INFORMATION. I hereby release, discharge, and hold harmless, to the extent permitted by federal, state, and local law, any party delivering information to the Company pursuant to this authorization from any liability, claims, charges, or causes of action which I may have as a result of the delivery or disclosure of the above requested information. I hereby release from liability the Company for seeking such information and all other persons, corporations, or organizations furnishing such information. If hired by the Company, I understand that I will be required to provide genuine documentation establishing my identity and eligibility to be legally employed in the United States by this Company as required by the Immigration Reform and Control Act of 1986. I also understand this Company employs only individuals who are legally eligible to work in the United States.