Mechanical engineering internship jobs in Springfield, OH

Mechanical Engineering Co-op/Intern - Summer 2026 This reflects potential openings for the Summer 2026 Co-op/Internship Session (May-August). This is a general job description and represents multiple openings in various departments. Honda offers both single and multi-semester co-ops and internships. College students must apply to the requisition pertaining to their major and semester of interest. Please note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. More about the Mechanical Engineering Co-op/ Intern at Honda The below descriptions reflect potential environments and duties within our various Mechanical Engineering Co-op/ Intern positions that we offer. Work environments and projects may include but are not limited to: Manufacturing: * Focus on equipment, process, quality and new model activities related to the department of placement (i.e Assembly department, Weld department, Paint department, Stamping department, Casting and Machining department, etc) * Project management * Problem analysis * Investigating new technologies and implementing countermeasure Quality: * Learning and performing vehicle testing * Conducting tests for chassis, brakes, controls, bonnet, trunk and/ or door systems * Testing procedures and fixtures * New model development, drawing, layouts and design change requests * Investigating and providing countermeasures for mass production design related issues * Warranty data trend analysis * Re-creating problem failures to determine root cause, develop countermeasures and perform confirmation testing Purchasing: * Assessing supplier process capabilities * Problem reporting and analysis. * Implementing countermeasures * Verifying and judging effectiveness * Investigating suspect part issues and approving part changes * Approving and verifying supplier countermeasures * Issuing trouble reports * Various daily tasks such as attending meetings, working on assigned project activities, problem analysis, writing technical reports, troubleshooting manufacturing or quality problems and communicating to internal/ external customers Facilities: * Updating and documenting Computer-Aided Design (CAD) drawings of existing infrastructure * Analyzing and designing existing sanitation, Heating, Ventilation, and Air Conditioning (HVAC) and building pressure systems * Developing short and long-term solutions to problems found * Designing modifications of existing facilities infrastructures * Updating mechanical engineering specifications and standards * Reviewing electrical drawings * Learning and understanding plant power infrastructure * Verifying electrical panel schedules * Updating highbay light location Tooling Equipment: * Designing manufacturing equipment and tooling in 2D and 3D Computer-Aided Design (CAD) systems * Determining equipment electrical hardware, software (Programmable Logic Controller (PLC), Human-Machine Interface (HMI), etc.), safety requirements and appropriate design * Managing a schedule and tracking daily processes * Investigating and troubleshooting problems during installation and manufacturing Research and Design: * Supporting the development of vehicle testing and countermeasure analysis (assisting with problem and data analysis, countermeasures, test set-up, data acquisition, test monitoring, recording activities, performance testing and reporting results) * Assisting design engineers in developing/ designing of future models and supporting the creation of drawings * Computer-Aided Design (CAD) Design * Cost and weight calculations * Attending meetings and working with various design/ test groups, suppliers, manufacturing groups, etc. What you need to be successful in this role Required: * Legally authorized to work in the U.S. without sponsorship * General Engineering Coursework * Minimum 2.5 Cumulative GPA or higher (You will be required to provide your current transcript) * Class status- Sophomore (by credit hour) or above * Availability to work a minimum of 10 weeks at 40 hours per week. * Enrollment in a bachelor's or master's degree program studying Mechanical Engineering or related field. * Valid U.S. Driver's License (exceptions considered on a case-by-case basis) * Ability to provide own transportation to and from work each day. Desired: Auto Computer Aided Design (AutoCAD), Computer-Aided Three-Dimensional Interactive Application (CATIA), Manufacturing related coursewor Position Locations Mechanical Engineering Co-op/Intern positions are offered in the cities/ states listed below, if you are selected to move forward in the process, you will be given the opportunity to make selections on your location preferences: * Anna, Ohio (45 minutes north of Dayton, Ohio) * Marysville, Ohio (45 minutes northwest of Columbus, Ohio) * Raymond, Ohio (45 minutes northwest of Columbus, Ohio) * East Liberty, Ohio (55 minutes northwest of Columbus, Ohio) * Russells Point, Ohio (30 minutes northwest of Marysville, Ohio) * Greensburg, Indiana (55 minutes southeast of Indianapolis, Indiana and 60 minutes northwest of Cincinnati, Ohio) * Lincoln, Alabama (45 minutes northeast of Birmingham, Alabama) * Timmonsville, South Carolina (20 minutes southwest of Florence, South Carolina) * Swepsonville, North Carolina (15 minutes SE of Burlington, North Carolina) Honda Co-operative and Learning Internships Program Benefits Housing Accommodations: Honda offers housing at a shared cost, or a housing stipend based on location for our Co-ops and Interns. It is not required to opt-in to but is available should you need housing at the time of your Co-op/ Internship with Honda. Honda Business Resource Groups: One of the ways Honda gives diversity a voice is through its business resource groups. The associate-led, company-supported groups have members aligned across different dimensions of diversity such as gender, ethnicity, ability, life stage and experiences. The groups provide networking opportunities, a chance to give back and professional development. Some groups have even given feedback on Honda products, making them more appealing to all. Embracing all views is what will drive us into the future. Honda wants passionate, driven people to be a part of that future. Performance Feedback: Honda Co-ops and Interns will have the opportunity to receive informal and formal feedback from their leaders, ask questions and express future interest in a scheduled mid-term and final evaluation. Mentorship: Each Co-op/ Intern is assigned a mentor in your department to help you navigate your time at Honda. On-site Wellness Center: Co-ops and Interns have access to join our Wellness Centers (varies by location). Our Wellness Centers are full gyms equipped with cardio machines, weights, basketball courts, pools, dieticians, personal trainers and group fitness classes. Paid overtime: Co-ops and Interns will receive 1.5 times their hourly rate of pay for any overtime worked. Hourly Wage Range: $27.22-$35.22 Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc. Consideration for full time employment: Our Cooperative Learning Internships program is utilized as a talent pipeline for our full-time positions! Additional details regarding Honda Co-op and Intern benefits are provided upon offer.

Responsive recruiter Applied Optimization (AO) Job Title: Mechanical Engineering Intern Reports to: Principal Scientist FLSA Status: Part -Time (Non-Exempt) To support an interdisciplinary research and development team that collects data, analyzes experimental data, and implements new generation scientific algorithms in the areas of mechanical engineering and material science, or space science. Essential Functions: Conduct numerical modeling, mathematics support, and computer programming Support resolution of software issues and requests from customers Support the troubleshooting and debugging of software Assist with enhancement of software functionality Maintain positive customer relations, to include projects status updates Interpret blueprints, technical drawings, schematics, and computer-generated reports Ensure accuracy and follow documentation procedures for all work; maintain notebook of daily activities and provide weekly report of work Other duties as assigned Required Qualifications: Undergraduate or graduate student enrolled in a program related to the field of mechanical engineering with a superior academic record General understanding of software development and knowledge of various coding languages Attention to detail and effective time and schedule management skills Effective organizing, planning, debugging, and problem-solving skills Ability to adapt within a small team to support evolving customer requirements Ability to execute instructions and communication in written, oral, and diagram form Demonstrated strong writing, fact-gathering, and analytical skills Basic computer and software skills including but not necessarily limited to Microsoft Office products (e.g., Outlook, Word, Excel, and Power Point) Preferred Qualifications: College sophomore or junior with a cumulative GPA (Grade Point Average) of 3.5 or higher A minor degree or dual degree in mathematics, computer science, computer engineering, or physics Knowledge or experience in C++ object modeling/software development, MATLAB programming, or other coding languages Ability to occasionally work 2nd shift preferred Citizenship/Security Clearance Requirements: U.S. Citizen or Green Card Holder May be required to obtain and maintain U.S. Government Security Clearance About Our Internships: Hours: The internship is a part-time, year-round position that requires a minimum of sixteen hours per week of work. The hours are flexible and they can change from one semester to another based on the student's class schedule. The weekly hours can be adjusted to balance for the examinations, tests and project submissions. About Us: Applied Optimization is a growing organization located in Fairborn, OH. We are an equal opportunity employer offering a competitive salary that is commensurate with qualifications and a comprehensive benefits package. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. Find out more about us at ***************** This job description is subject to change. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law.

Job DescriptionAbout Revive Environmental Technology Revive Environmental Technology, LLC ("Revive") is a mission-driven environmental technology company focused on delivering rapid, permanent solutions for PFAS and other persistent environmental contaminants. Our flagship PFAS Annihilator systems are built on patented supercritical water oxidation (SCWO) technology and are setting a new standard in liquid waste destruction, including PFAS-laden AFFF concentrates and complex organic waste streams. Position Overview We are seeking a Mechanical Engineer Intern or Co-Op to further develop and scale our PFAS Annihilator SCWO technology. The position is based in Columbus, OH. The role reports to the Chief Technology Officer. How an internship or Co-Op would be different with Revive than other companies is we give real world challenges to solve to each team member, interns and Co-Ops included. Your work would be on a project that has meaningful contribution to Revive as a growing young company, and the learning opportunities are fast paced and mission critical. Key Responsibilities for your projects could be: Engineering Design & System Development Design, prototype, and iterate mechanical components and subsystems for Annihilator systems and support equipment. Assist in the selection and specification of mechanical equipment including pumps, valves, fittings, and materials for high-temperature/high-pressure environments. Support assembly, fit-up, and testing of newly fabricated equipment; identify and resolve mechanical interferences and installation issues. Operations Support and Troubleshooting Collaborate closely with site operators, technicians, and engineers to support day-to-day operations of the SCWO systems. Investigate and resolve mechanical failures or equipment anomalies, conducting root cause analyses and implementing corrective actions. Develop and implement maintenance procedures, equipment setup guides, and operating protocols for mechanical systems. R&D and Process Optimization Collaborate with chemical/process engineers to translate theoretical concepts into testable mechanical solutions (e.g., injection hardware, quench systems, thermal shielding, brine handling). Analyze test results, identify trends, and recommend mechanical or operational changes to increase system uptime, throughput, or maintainability. Assist in designing and executing long-duration reliability tests to characterize mechanical component performance over time under SCWO-relevant conditions. Required Qualifications Knowledge and/or experience in process engineering design. Strong safety record and mindset. Experience with CAD modeling Excellent problem-solving and cross-disciplinary collaboration skills. GPA of a 3.0 or better Preferred Qualifications Prior coursework with a "B" or better grade in Thermodynamics and Fluids Experience / prior exposure to sensor and actuator selection and integration Industrial experience. Familiarity with PFAS chemistry. Background in thermal reaction systems, heat integration, and fluid mechanics. Experience with fabrication, manufacturing, and good lab practices. Why Join Revive Contribute directly to solving one of the most pressing environmental challenges of our time. Work alongside an agile, mission-driven team combining deep science with practical field engineering. Be at the center of scaling up one of the first proven PFAS destruction systems to national and international markets. Competitive compensation and growth opportunities in a fast-scaling cleantech company.

Summary : The Mechanical Engineering Intern will support Airstream's Product Development & Engineering (PD&E) team by creating high-quality 3D models, drawings, and design documentation using Autodesk Inventor. This role contributes directly to the design, testing, and continuous improvement of chassis, body structures, interior components, and mechanical systems. Successful interns demonstrate strong initiative, accountability, and problem-solving skills, building a foundation for long-term success at Airstream. Supervisory Responsibilities: None Essential Duties and Responsibilities include the following. Other duties may be assigned. All associates of Airstream are required to know and adhere to the policies and procedures which pertain to his/her position. 1. Provide technical input to the Engineering Design Team for the development and testing of chassis, body, interior cabinetry, fixtures, appliances, and related mechanical systems & components for new and existing vehicles. 2. Participate in the creation of solid models, drawings and management of data according to accepted design practices using CAD design software. 3. Aid in the manufacturing implementation of vehicle and component designs including the training and auditing of Production Associates and development of installation aids as needed. 4. Assist with the creation and evaluation of working mockups & prototypes as needed to confirm and improve design maturity. 5. Aid in the methodology, design, and practice of product testing to validate design intent, consumer safety, and overall quality as well as compliance to applicable regulatory requirements. 6. Research warranty, Customer Service, & Operations feedback related to vehicle Mechanical Systems to identify opportunities for improvement in current or future designs. What You Can Expect to Learn • Hands-on experience with real product development cycles. • Exposure to engineering reviews, testing processes, and cross-functional collaboration. • Understanding of manufacturing processes, quality systems, and design-for-assembly principles. • Experience working with a premium brand known for craftsmanship and innovation. Education and/or Experience : Pursuing a Mechanical Engineering or Industrial Design degree (preferred: 3rd or 4th year; strong 2nd-year candidates considered). Skills/Qualifications: 1. Proven ability to manage multiple assignments and tasks (at different stages), set priorities, and adapt to changing conditions and work assignments. 2. Strong computer skills including proven experience in use of 3D Computer Modeling software (Autodesk Inventor preferred) and in the creation of related documentation 3. Good communication, analytical, & time management skills and an ability to work in a focused environment, delivering high quality results on time and on budget 4. Ability to assess a situation, seek multiple perspectives, and gather data to implement sustainable solutions. 5. Ability to find solutions to problems using creativity, reasoning, and past experiences along with the available information and resources. 6. Proficient with Microsoft Office (Excel, Word, PowerPoint, Project, etc....). Position Details Location: Onsite at Jackson Center, Ohio Duration: Summer Internship Schedule: 40 hours per week Relocation assistance: Not provided

The intern will assist the mechanical engineering team with design activities for Vertiv's liquid cooling systems. Tasks include 3D modeling, BoM updates, drawings creation, and support during design reviews. Exposure to Vertiv's Creo modeling standards and PLM workflows will be provided. Preferred Major/Field of Study: Mechanical Engineering Preferred Year: Junior or Senior Tools/Skills Exposure: Creo CAD, Oracle PD Cloud PLM

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start ~January 2026 and go through the Spring 2026 semester. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Produce detailed layout and equipment details of HVAC systems, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), Strong interest in Building Systems Mechanical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. #LI-CM1 #LI-Onsite

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), **onsite position** with a competitive hourly pay rate and eligible for overtime pay. **This position will start in August 2026 and go through Fall 2026.** Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach you how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects and become an important part of our design team. **Job Functions: (may include but are not limited to)** - Produce detailed layout and equipment details of HVAC systems, - Produce one-line diagrams/schematics, - Assist the design team in the process of assembling organized sets of drawings, - May assist in the data collection and/or field verification, and - Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements:** - Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), - Strong interest in Building Systems Mechanical Engineering, - AutoCAD and REVIT experience preferred, - Strong interpersonal and communication skills, - Proficiency with Microsoft Word and Excel, - Ability to work both independently and with a team, - Ability to work full time in our office throughout the co-op term, - Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

Summary: The Mechanical Engineering Intern will support Airstream's Product Development & Engineering (PD&E) team by creating high-quality 3D models, drawings, and design documentation using Autodesk Inventor. This role contributes directly to the design, testing, and continuous improvement of chassis, body structures, interior components, and mechanical systems. Successful interns demonstrate strong initiative, accountability, and problem-solving skills, building a foundation for long-term success at Airstream. Supervisory Responsibilities: None Essential Duties and Responsibilities include the following. Other duties may be assigned. All associates of Airstream are required to know and adhere to the policies and procedures which pertain to his/her position. 1. Provide technical input to the Engineering Design Team for the development and testing of chassis, body, interior cabinetry, fixtures, appliances, and related mechanical systems & components for new and existing vehicles. 2. Participate in the creation of solid models, drawings and management of data according to accepted design practices using CAD design software. 3. Aid in the manufacturing implementation of vehicle and component designs including the training and auditing of Production Associates and development of installation aids as needed. 4. Assist with the creation and evaluation of working mockups & prototypes as needed to confirm and improve design maturity. 5. Aid in the methodology, design, and practice of product testing to validate design intent, consumer safety, and overall quality as well as compliance to applicable regulatory requirements. 6. Research warranty, Customer Service, & Operations feedback related to vehicle Mechanical Systems to identify opportunities for improvement in current or future designs. What You Can Expect to Learn * Hands-on experience with real product development cycles. * Exposure to engineering reviews, testing processes, and cross-functional collaboration. * Understanding of manufacturing processes, quality systems, and design-for-assembly principles. * Experience working with a premium brand known for craftsmanship and innovation. Education and/or Experience: Pursuing a Mechanical Engineering or Industrial Design degree (preferred: 3rd or 4th year; strong 2nd-year candidates considered). Skills/Qualifications: 1. Proven ability to manage multiple assignments and tasks (at different stages), set priorities, and adapt to changing conditions and work assignments. 2. Strong computer skills including proven experience in use of 3D Computer Modeling software (Autodesk Inventor preferred) and in the creation of related documentation 3. Good communication, analytical, & time management skills and an ability to work in a focused environment, delivering high quality results on time and on budget 4. Ability to assess a situation, seek multiple perspectives, and gather data to implement sustainable solutions. 5. Ability to find solutions to problems using creativity, reasoning, and past experiences along with the available information and resources. 6. Proficient with Microsoft Office (Excel, Word, PowerPoint, Project, etc....). Position Details * Location: Onsite at Jackson Center, Ohio * Duration: Summer Internship * Schedule: 40 hours per week * Relocation assistance: Not provided

Qualifications A minimum of a bachelor's degree in Mechanical, Civil, or Electro-Mechanical Engineering is required. Employment and Benefits In special circumstances, course pay (compensation) may be higher for hard to staff courses or may be lower for low enrollment courses. Please contact the Program Director for more information.

As a Mechanical Engineer Intern, you will assist in the design, maintaining, and installing of mechanical systems for our processing equipment. To thrive in this role, you must... * College student pursuing a degree in Mechanical Engineering or related course * Strong interpersonal skills * Analytical and high attention to detail * Self-motivated and high attention to detail * Eager to work in a creative and problem solving environment * Look for ways to continuously improve our processes. About Precision Strip As the nation's largest toll processor, Precision Strip strives to do the exceptional every day. We are a team of collaborative problem solvers, dedicated to providing the best customer service. With our in-house engineering and technical group, we believe no problem is too big. Precision Strip is a drug free workplace and an Equal Employment Opportunity Employer. Applications may be completed online at ******************************** Learn more about Precision Strip by visiting ************************

Join a dynamic team responsible for designing, manufacturing, and distributing industrial material handling equipment and systems, including custom lift assists, conveyors, and automation solutions tailored for the Automotive and Appliance industries. Responsibilities * Design custom lift assists and fixtures, focusing on bespoke solutions as there is no standard product line. * Spend 80% of your time on mechanical design using SolidWorks and 20% on hands-on testing. * Assist with customer buyoffs, ensuring equipment functionality before it is shipped to the customer's facility. Essential Skills * SolidWorks design experience is a must-have. * Minimum 3 years of mechanical design engineering experience with custom equipment/machinery for Level 2 position. * Minimum 5 years of mechanical design engineering experience with custom equipment/machinery for Level 3 position. * Experience in designing fixtures. Additional Skills & Qualifications * Customer-facing experience is a huge plus. * Bachelor's degree in Mechanical Engineering is strongly preferred. * Experience with material-handling equipment, fixture design, FEA, and custom equipment. * Outgoing and sociable personality for effective customer interactions and team collaboration. Work Environment The position can be based in either Dublin, OH, or Bellefontaine, OH. Candidates based in Dublin may need to make occasional day trips to Bellefontaine, approximately once per month. The role offers the opportunity to contribute to the design of completely custom equipment, allowing for creativity and variance in design. The work environment encourages collaboration and customer engagement, providing a platform for professional growth in a supportive and innovative setting Job Type & Location This is a Contract to Hire position based out of Dublin, OH. Pay and Benefits The pay range for this position is $36.53 - $45.67/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Dublin,OH. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose As an Engineer within Seat and Package Development Department you are expected to provide logical designs as part of a project team supporting model developments. Working with project team members and cross-functionally, you are expected to learn, grow, and develop your know-how and engineering skills. Key Accountabilities Engineering Solution Design - Draft engineering solutions for an assigned component / part (or more complex parts with supervision) and the associated drawings and validation processes, to gather data and provide feedback on their feasibility, costs, quality, and performance Engineering Specifications - Carry out a range of activities under the direct guidance and supervision of more senior engineers to draft engineering specifications for an assigned component / part and the evaluation of their effectiveness, to inform manufacturing work in the organization and / or of its suppliers. Ensure functional safety standards are met. Data Collection and Analysis - Collate and analyze data using pre-set tools, methods, and formats. Involves working independently. Integration & Correlation - Work to collaborate and integrate your design into the vehicle with other groups under the direct supervision of more senior engineers. Learn from interactions with other groups (i.e. design, testing, manufacturing, styling, service) for the assignment at hand. Supplier Management - Work with existing suppliers to mature designs and address issues in a timely manner to achieve project requirements. Documentation - Prepare logical and conclusive documentation for review by more senior engineers to record and submit all necessary development / testing / research information as the respective activities mature. Project Management - Work within an established project management plan to achieve specific goals such as schedule, cost, investment, or weight. Provide regular updates and contribute in project team meetings. Personal Development - Develop own expertise and capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching. Gain or maintain external professional accreditations where relevant to improve performance and fulfil personal potential. Build proficiency in relevant technology and increase knowledge of external regulations and industry best practices through ongoing education, conferences, and specialist publications. Qualifications, Experience, and Skills Minimum Educational Qualifications BS Mechanical, Aero, Automotive or equivalent Engineering experience. BS Bio-Mechanical, Bio-Medical, or equivalent Engineering experience. BS Industrial Design or equivalent industry experience. Minimum Experience 3+ months engineering experience including co-op, internship, senior project, or equivalent. Other Job-Specific SkillsPast experience with CAD software (CATIA V5 or V6 preferred) Proficient in Microsoft Office programs Ability to travel and work overtime as required. Job Dimensions Decisions Expected Working Conditions Primary working location is seated at a desk Limited lifting of parts and part dunnage maybe required on occasion OT required as necessary to achiever program deliverables. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Inteva Materials Engineering Intern get the chance to learn about Materials Engineering's role in supporting a manufacturing company, gain hands-on experience, and work on meaningful projects that make an impact. The intern in this role will work with the Materials Engineering team out of Inteva's Technical Center in Vandalia, OH. In this position, you will support Inteva's core value of caring for the world and our communities with group volunteering opportunities throughout the summer. Most importantly, you will have fun, learn, and grow. This is a full-time internship position during the summer semester (May 2026 - August 2026) What Will You Get To Work On? Design test procedures and parameters for material & adhesive development Execute test procedures on different adhesive samples Communicate test results to product development teams Poential travel to customers, suppliers and other Inteva facilities Learn and implement multiple manufacturing processes Work in manufacturing plants and development lab facilities Hands on prototype part building Be a member of a development team who is working on new products Vandalia Site recognized yearly as one of the best places to work in Ohio by industry rating groups

Department: Tooling Reports to: Tooling Manager Employment Status: Salaried Exempt Shift: Mon.-Fri. 8am-5pm Benefits: 3 medical plans. Optional voluntary benefits - Dental, Vision, Life, Accident insurance and more. The company pays for a portion of these benefits. 401k Retirement Plan- Company matching. Quarterly Profit-Sharing Bonus. Casual Dress Code (Jeans, t-shirts, shorts, sweatshirts... ect) Paid Time Off- Prorated during employees first year of employment. Annual $100 shoe allowance for safety toed shoes. Matrix- Employee Assistance Program. Job Summary: Plans, designs, and supports fabrication tooling systems. Responsible for organizing highly complex activities for the design, development, implementation, and maintenance of tooling projects. Essential Duties and Responsibilities: - Plan and design tooling systems to optimize production efficiencies. - Develop manufacturing drawings in accordance with company standards. - Consult and oversee the construction of tooling systems with die shop personnel. - Confer with production, process technicians, and QA during tooling development and line trials. - Implement operating procedures and provides training on tooling systems Supervisory Responsibilities: None. Skills, Qualifications, Education and/or Relevant Experience: - Experience with Solidworks and AutoCAD preferred, or equilivlant 3D and 2D software - Experience with MS Office software - 3-5 years experience mechanical design/machining/extrusion process - Ability to work effectively with others as a team. - Ability to communicate well with others. - Ability to interact with all levels of employees. - Strong technical knowledge of the extrusion and machining processes. - Strong organizational skills. - Must be seen as a leader who will take charge of situations. - Good computer skills. - Highly motivated,self starter, who can work without direct supervision. - Positive attitude with a focus towards continuous improvement. - Minimum education requirement: Prefer a BS in engineering, minimum of an associates degree with the intent to further education to obtain a BS. Physical/Mental Demands: - Displays consistent desire to do more than is asked to help coordinate processes in order to get the job done. - Ability to handle multiple tasks and time sensitive work that can change rapidly. - Must be able to work while standing for long periods. - Be able to lift and move heavy (70 lbs.) equipment and supplies. - Able to work all shifts as needed. Engineered Profiles LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws.

McKim & Creed is a unique, employee-owned firm. First and foremost, we value people. This means we not only hire great talent, we've also created an environment where each individual can grow, flourish and apply innovative thinking. As a result, we've created a world-class team of professionals within a nimble organization. That's what our clients want. That's why we succeed. Our clients hire us because of our people. McKim & Creed has a reputation for state-of-the-art engineering services that help energy users and providers convert facilities to cleaner, more efficient energy sources; harness the power of renewables; and optimize existing infrastructure and resources. Our highly respected team of engineers, planners and project managers are committed to the innovation, sustainability and resource efficiencies that lead to a cleaner, safer and more sustainable future. We have an exciting opportunity to join our Building, Energy and Infrastructure (BEI) Group. If you want to work at a company that will help you become the best you can be, we're glad you found McKim & Creed. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: * Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned * Competitive pay + paid holidays, bereavement and parental, medical, and military leave * Multiple office locations to work from: Stick close to home or travel for a change of scenery * Growth opportunities & training: Grow confidently in your career with our mentoring & training options * Professional development: Tuition reimbursement, early career professional program, online courses & more * Work that makes a difference: See the direct impact your work has on our communities * Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way WATCH THIS VIDEO TO LEARN MORE ABOUT WHAT IT'S LIKE TO BE A PART OF OUR TEAM! YOUR DAY-DAY WILL INCLUDE: * Provides technical and design services in support of mechanical, plumbing and fire protection design projects as part of a multi-discipline project team to produce mechanical, plumbing and fire protection design/construction drawings and specifications for institutional, commercial and industrial facilities. * Will be responsible for completing design tasks within budget and on schedule and communicating with Group Manager, Project Manager, Sr. Mechanical Engineer and design team to complete work efficiently. WHAT YOU NEED: * Must have at least 1 year of similar work experience (including Revit experience). * Good technical and communication skills required. * Methodical, precise and consistent but enjoys some variety in work schedule and can tolerate change. * Enjoys working alone when required but can work effectively on a project team. * Must be able to climb ladders and perform field survey duties. * Requires a valid driver's license and an acceptable motor vehicle and criminal record. WHAT MAKES YOU STAND OUT: * BS Degree in Mechanical Engineering is preferred. * Experience with healthcare work is preferred but not required. * Passed your FE Exam and have obtained your E.I.T is preferred. McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace. #DNP

Job DescriptionDescriptionWe are an Ohio based mechanical and electrical consulting engineering firm with offices in North Royalton and Columbus established in 1993. We are seeking a full-time mechanical engineer or mechanical designer with at least 3 years of experience to support the growth and expansion of our business. The position would start as a "mechanical engineer/designer" and potentially progress over time to "project manager” or “project engineer." Key ResponsibilitiesPosition will involve HVAC and Plumbing system design, design computations including loads, air and piping distribution and sizing, equipment selection, specification preparation, field work (both design investigation and construction observation), design review and correspondence with clients, colleagues, owners, and contractors. • Preparation of design layouts for commercial and industrial mechanical systems based on specific design objectives. • Preparation of schematics for various systems. • Collaboration with all disciplines to achieve completed coordinated design and reviewing the work of others. • Performance of on-site investigation to confirm existing conditions. • Developing familiarity with current mechanical codes and standards. • Forming relationships with equal level personnel of other disciplines (architectural, electrical, structural civil, etc.) and manufacturing sales representatives. • Becoming familiar with and preparing general and mechanical specifications. Skills, Knowledge and Expertise• Must have consultative mechanical engineering experience. Interpersonal skills to work effectively with others. • Familiarity with system specific materials, components, and systems. • Basic knowledge of high mathematics relative to the work. • Oral and written communications skills. • Analytical ability to solve complex problems. • Working ability/knowledge of AutoCad. • Working ability/knowledge of REVIT is not required, but desired. Benefits We operate an open and collaborative space that allows for an environment where ideas are freely exchanged, solutions are created, and proposals become reality. Even though the pace is fast, we do what we can to maintain a respectful, cooperative spirit throughout the office that considers schedules, work habits, personal priorities, and “space”. Additional benefits include the following: • 401(k) with Safe Harbor contribution of 3% of salary • Full coverage of Health insurance in Medical Mutual SuperMed PPO Network • Paid time off including vacations and holidays.

Greetings for the day! My name is Nancy Sahni from TestingXperts, we are a global staffing, consulting and technology solutions company, offering industry-specific solutions to our fortune 500 clients and worldwide corporations. Position: Mechanical Designer Location: Columbus, OH 43085 Project Duration: - 6 months Job Description:- Study the product manufacturing process, assembly process, preparing engineering data 3D CAD and 2D engineering drawings, preparing work instruction and assembly instruction documents on CAD/PLM s/w and MS office tool as directed by Client project lead. Identify missing part information and dimensions , measure dimension from physical part update CAD model and drawings. Responsibility:- • Interaction with project lead at client site. • Data and information gathering of the product with respect to manufacturing process, assembly process, engineering data and filed complaint issues. • Verifying availability of reference data and engineering data, creating missing information, work instruction and updating the documents for engineering to resolve the issues. • Conduct physical measurement of part on need basis Key Technical Skill:- • Hands on experience on Solid edge for 3D and 2D drawing creation, good understanding on sheetmetal part design and welded structures. • Having knowledge on Pipe routing and product configurations in Solid Edge ST8/ST9. Working knowledge on Teamcenter an and Agile PLMs. • Minimum 3 years of experience on Solid Edge , and 1 to 2 years' experience on TC/Agile in last three years of experience. Familiar with MS office tools. Desired Skills:- • 3D and 2D design experience on Solid Edge s/w, working experience Team Centre plus Agile PLM. Knowledge of sheetmetal prat design, sheet metal press break operations and CNC laser cut operations. Knowledge of welded structures with dimensioning and tolerancing. • Should be able to handle and use basic measuring equipment's. Conversant with metrics and inch units of measurements. Experience Level:- • 4 to 6 years 1.Need a guys who can work independently and take responsibility for delivering on his own 2.: experience on PLM tools like Team Center and Agile, very minuscule experience on Solid Edge. Need min 2 to 3 years of experience on Solid Edge and at least one year of experience on team Center and Agile-CM experience. Additional Information All your information will be kept confidential according to EEO guidelines.

Own your future as an intern at Ecolab! Our internship program provides you with invaluable insights from leaders across Ecolab, engaging and challenging projects, opportunities for personal and professional growth, extensive networking, and the chance to immerse yourself in our innovative and dynamic environment. Ecolab is seeking Engineering Technical Sales Interns to join our summer 2026 technical sales internship program. You will help identify and propose solutions to preserve energy and water, minimize our customers' environmental footprint and increase productivity. You will combine a traditional engineering approach with a consultative sales approach focused on strong account leadership skills and retention of strategic accounts. You will also learn how to build long-term relationships with a large customer base by understanding their key business drivers, providing strategic resolution through hands-on problem solving, and offering new digital technology solutions. What's in it For You: * The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food and healthy environments * The ability to make an impact and shape your career with a company that is passionate about growth * The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best * Apply what you learn in the classroom to meaningful projects that have genuine business impact * Finish your internship with a realistic job preview of what a "day in the life" of an Ecolab associate looks like * Be considered for a full-time job offer (to start upon graduation) at the end of a successful internship into an Associate District Representative role. What You Will Do: * Complete an independent project(s) under primary trainer's direction to yield calculated ROI * Complete safety training & technical lessons that serve as an introduction to water treatment applications * Observe and participate in service as it is provided to customers to assure accurate chemical application, process optimization and documentation * Complete introductory training of the consultative sales approach * Visit multiple customer sites across the region (40-100% of training time spent in field) to learn best practices and types of unit applications and treatment approaches * Build key relationships and interaction with departments and personnel that will be critical to success in the field * Work within various regional sales districts and customer locations to build specific technical knowledge and gain sales experience while helping customers achieve their sustainability goals. * Provide routine service support to Sales Representative. May be subject to testing includes Boilers, Cooling towers, Closed loops, R.O. and filtration. Position Details: * 11-week paid internship program, starting on Monday, June 1st * Willing to relocate within the United States. Nationwide locations available * Relocation assistance may be available * Opportunity for a hybrid work environment, balancing field days with working remotely Minimum Qualifications: * Pursuing undergraduate degree in Engineering (Chemical, Mechanical, Environmental, Industrial) graduating in December 2026 or Summer 2027 * Immigration sponsorship not available for this role * 11-week paid internship program, starting on Monday, June 1st * Position requires a valid US Driver's License and acceptable motor vehicle record and access to a personal vehicle Physical Demands: * Position requires lifting/pushing/carrying up to 50 pounds chest high About Ecolab A trusted partner at nearly three million customer locations spanning over 170 countries, Ecolab is the global leader in water, hygiene and infection prevention solutions and services. Our team delivers comprehensive solutions, data-driven insights and personalized service to advance food safety, maintain clean and safe environments, optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, hospitality and industrial markets. When you come to work at Ecolab, you get to take on some of the world's most meaningful challenges and have the opportunity to learn and grow, shape your career, make an impact and quickly see the importance of your work. Annual or Hourly Compensation Range: $23.00 - $25.00 per hour. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: * Undergo additional background screens and/or drug/alcohol testing for customer credentialing. * Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

ARCTOS Technology Solutions, LLC arctos-us.com/careers/ Reach New Heights! ARCTOS Technology Solutions, LLC (ARCTOS) is a fast-growing, technology-oriented small business providing aerospace, defense, and digital solutions, with offices and work sites across the United States. We're looking for team-oriented innovators eager to tackle interesting challenges, work on important problems, and receive great benefits and employee support. REQUIREMENT ARCTOS is seeking a highly skilled and motivated Research Engineer to join our team supporting AFRL's Manufacturing Technology Division (AFRL/RXM). This role is focused on advancing the state-of-the-art in autonomous design and thermomechanical modeling for aerospace systems and integrating these models with cutting-edge additive manufacturing (AM) processes. The successful candidate will drive both fundamental and applied research, developing novel design and performance modeling frameworks that explicitly incorporate manufacturability constraints, specifically for AM technologies. PRIMARY RESPONSIBILITIES The Research Engineer will work with Government customers, other ARCTOS personnel, and other Government organizations and contractors in the performance of the following duties: Design for Additive Manufacturing (DfAM): Research and develop methodologies for tailoring design and optimization frameworks (e.g., topology optimization, generative design) to account for AM process-induced constraints, defects, and material anisotropy. Integrate manufacturability metrics directly into the design loop to ensure optimized components are successfully produced using AM. Thermomechanical Modeling & Simulation: Develop, implement, and validate advanced finite element analysis (FEA) and other numerical models, including machine learning frameworks, to predict the thermomechanical performance of materials and components under extreme operating conditions relevant to Air Force applications. Focus on modeling the performance of systems where thermal loads and mechanical stresses are intrinsically coupled. Research Leadership and Execution: Lead and contribute to applied and fundamental research projects, resulting in high-impact publications, technical reports, and transition of technologies to Air Force programs. Work effectively on multidisciplinary teams to tackle complex, interconnected engineering problems. Software and Tool Development: Utilize and maintain proficiency in commercial engineering mechanics and design software (e.g., Abaqus, ANSYS, COMSOL, nTop). Develop, customize, and apply custom engineering mechanics and design software/scripts (e.g., in Python, MATLAB, C++) to extend capabilities and integrate specialized models. KNOWLEDGE AND SKILLS The well-qualified candidate will have expertise in many of these areas: Common commercial simulation software and programming languages for custom tool development. Hands-on experience in tailoring and optimizing engineering design frameworks (e.g., optimization algorithms, surrogate modeling, machine learning). Proven experience in thermomechanical modeling for design, performance prediction, and manufacturing process modeling. Demonstrated experience with FEA and multi-physics applications. Experience with applying classic and modern machine learning algorithms to optimization and engineering problems, e.g. active learning (Bayesian optimization, reinforcement learning), deep learning (neural networks) Specific experience with additive manufacturing processes (e.g., Powder Bed Fusion, Directed Energy Deposition) and understanding of how process parameters influence material properties and component performance. Excellent organizational and time management abilities Desire to work both independently and in a team environment as the project requires Excellent verbal and written communication skills Proven track record in conducting both applied and fundamental research, evidenced by publications, patents, or successful technology demonstrations. EDUCATIONAL, CLEARANCE AND CERTIFICATION M.S. or Ph.D. in Mechanical Engineering, Aerospace Engineering, Materials Science, or a closely related field. U.S. Citizenship is required PHYSICAL/WORKING ENVIRONMENT Primary work environment is a standard office setting. TRAVEL Occasional travel is expected and will be performed under the guidelines of Federal Travel Regulations (FTR) and/or Joint Travel Regulations (JTR) BENEFITS 401(k) Retirement Plan with Company Matching; Health Insurance & HSA; Dental & Vision Insurance; Company Paid Life Insurance, AD&D and Short-Term Disability; Paid Time Off, Volunteer Time Off; Employee Assistance Program In compliance with pay transparency requirements, the salary range is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. ARCTOS and its subsidiaries are an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We look forward to reviewing your application!