Motor Technology jobs in York, PA - 36102 jobs

Job Description Motor Technology, Inc. strives to create an environment where employees feel supported, valued, and motivated. We do this by providing a workplace that encourages teamwork, innovation, personal and professional growth, work-life balance, and a commitment to doing what is best for our employees. Our employee benefits include: 401k with a match up to 8% Medical, Dental, & Vision insurances for employees, spouses, and dependents Employer-paid Short-term Disability Employer-paid Life Insurance Policy Voluntary Insurances at a group rate Vacation and Sick Paid Time-off 7 Paid Holidays Annual Performance and Salary Reviews Motor Technology, Inc., a national leader in providing superior quality and value in electro-mechanical repairs and services to our customers, is seeking an experienced Industrial Electronics Technician I for our shop. Since 1981, we have been an integral part of keeping national industries up and running smoothly and efficiently. We are a family-owned company that builds, services, and sells industrial motors, controls, gearboxes, and related driven equipment for advanced electric motor systems. Our Electronics Techs are responsible for performing repairs on various kinds of electromechanical components of industrial control assemblies. The hours for this position are 7:00AM-3:30PM with a 30 minute unpaid lunch break. Responsibilities: Read job cards to determine job status, work authorizations/limitations, estimate, description of problems, and/or expected serviceability. Analyze various manufacturers' schematic diagrams. Troubleshoot and test electronic components to board level, using various methods and testing equipment. Repair and/or replace electronic components to board level, including but not limited to: diodes, transistors, resistors, capacitors, integrated circuits, other printed circuit components, etc. Verify repairs using various start-up testing procedures. Operate specialized equipment, including but not limited to: oscilloscopes, megohmmeters, high-voltage insulation testers, AC/DC volt-ohm-milliammeters, clamp-on ammeters, frequency generators, signal generators, capacitance meters, various test panels, soldering equipment, infrared scanning equipment, various kinds of handheld power and nonpower tools, etc. Complete required forms on computer system for each job accurately. Observe all safety procedures and use proper protective gear. Perform other duties as required. Qualifications: High school diploma or equivalent Valid driver's license Experience with AC variable frequency drives and DC drives Basic understanding of pneumatic, hydraulic, electrical, and mechanical systems. Ability to understand, perform, and retain skill-related training, and operational and safety procedures Comfortable working with customers Good computer skills Provide tools and toolbox Able to lift up to 50lbs Willing to be on call one weekend every 4 weeks PLC experience, preferred but not required Motor Technology, Inc. is committed to a policy of equal employment opportunity for applicants and employees. It is the policy of Motor Technology, Inc. to apply recruiting, hiring, training, promotion, compensation, and professional development practices without regard to actual or perceived race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, age (40 or older), disability or certain classifications based on genetic information, or any other characteristic protected by federal, state or local laws, regulations or ordinances. Job Posted by ApplicantPro

Duration: 8 Months Contract Additional Information Role will Start Date: February 1. From Feb - April: 25 - 30 hours per week. Then the hours will increase between May - August: 40 hours per week. Assignment End Date: August 29. Will need to be onsite for meetings as required. Description/Comment: The Sponsorship Fulfillment Manager plays a key role in supporting the Sponsorship Sales Team in providing account management, operational support and white glove service to our sponsors and licensee who are the backbone of D23 - The Ultimate Fan Event. This position serves as a critical liaison between client, the sponsor/licensee teams and the show management team-ensuring clear communication, creative problem solving, accurate documentation, and on-time execution of all operational related milestones. The ideal candidate is detail-oriented, thrives in a fast-paced environment, and a trade show expert. This role will help ensure the satisfaction and repeated participation of these key stakeholders. This role will directly support the Sponsorship Fulfillment Lead and Sponsorship Sales team, partnering closely with show management, and key event logistic teams. Responsibilities: Assigned to lead up to 25 accounts. Responsible for populating and managing the Sponsor Portal with Coordinator support Work on Sponsor newsletters and Know before you go document. Develops sponsor information sheet with key dates Handles reach out to all sponsors related to Media Bag gifts Sets up 2-3 Freeman webinars with all sponsor contacts to review the Exhibitor Services kit including a Q and A Relating to Account Management Weekly update call with Sponsorship sales team Weekly update call with Sponsorship fulfillment Lead Set up initial call with each assigned sponsor to discuss timelines Relay booth numbers to Sponsors with an introduction note Review Exhibitor Kit with Freeman Manage all logistics as it relates to assigned sponsors. Collect High Level Experience Plan for Operations review Attend booth review (1) and relay feedback to assigned sponsor Collect Detailed Experience Plan Collect all COI's and send them to legal for review Collect Draft Electrical diagrams and pass along to teams Collect Draft Internet diagrams and pass along to teams Collect Final Electrical diagrams and pass along to teams Collect Final Internet diagrams and pass along to teams Work with assigned sponsors on lead retrieval strategy Get information for credentials to input into registration tool Review any in booth talent, activations or signings and all related logistics (ie crowd control, security) Advise and source all items that need to be produced (and paid for by sponsors) relating to assigned account activations Provide all related signage copy for all assigned sponsor activations. POC to TUDFE event producers for collaboration, information and all physical event activations by assigned sponsors that take place during the event. Main “execution” contact for assigned sponsors. Event week - key contact for load-in/event days/load-out for assigned sponsors, EAC wrist banding execution, sponsor activation fulfillment. Responsible for input into post-event feedback report Basic Qualifications 5-7+ years of experience working in a sponsorship environment or trade show environment. Proven experience managing multiple complex stakeholders. Understanding of the Trade Show related workflows Strong organizational and documentation skills. Excellent written and verbal communication skills. Ability to represent The Company to our key partners, sponsors, licensees. Ability to work cross-functionally and manage multiple priorities in a high-pressure environment. Familiarity with client brand standards, processes, and culture preferred. Experience working with sponsors or licensees for The Company is a plus. Required Education BA/BS Degree or equivalent experience About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Recruiter Details: Name: Mayur Jaiswal Email: ***************************** Internal Id: 26-00653

A global advisory firm in San Francisco is seeking a Cyber Threat Intelligence Team Lead to build and lead a comprehensive Cyber Intelligence program. The role involves managing a team, developing strategies, and ensuring the protection of systems and data. Candidates should have significant experience in cybersecurity, excellent leadership skills, and familiarity with tools like Splunk and Crowdstrike. The position offers a competitive salary between $160,000 and $185,000 per year, along with comprehensive benefits. #J-18808-Ljbffr

Job Title: Clinical Payments Analyst I Client: Large Life Sciences Company Duration: 12 month contract with the possibility for extension WHAT YOU'LL DO This position is responsible for various financial analysis activities for the Clinical Study Payments Team including but not subject to, new study budget review, study and site budget set up, invoice processing, customer service inquiries. It is also responsible for various reporting and month end activities. Major and On-going Job Duties: • Acts as a liaison and consultant for specific study team's monthly analysis, budgeting, quarterly forecasting, and annual strategic planning processes • Responsible for generating and processing clinical study reimbursements which include invoices and quarterly payments • Assist in the facilitation of new study budget set up, quarterly payments, and special reports • Support internal and external audits by preparing and providing relevant reports and analysis • Special project analysis and support involving clinical study payment data • Work as a liaison with the Clinical Study Data Systems team for application enhancements • Performs analysis of clinical study payment data per defined requirements • Resolves and/or facilitates resolution of problems including identifying causes of problems to prevent re-occurrence of problems • Promotes confidentiality of financial and other data at all times • Reviews, updates, and adheres to all Standard Operating Procedures • Researches payments issues for accuracy and presents findings to departments as necessary • Review contract and grant agreements for financial risk and billing issues • Prepares monthly projection analysis report for Clinical Trials which provides anticipated associated financial revenue for upcoming visits • Reviews study budget in Clinical Study Payments Application to ensure proper visit accruals Other Duties: • Remains current on developments in field(s) of expertise • Performs related functions and responsibilities, on occasion, as assigned Experience & Training: Equivalent education level and experience required: Must have 1-3 years' experience in finance/accounting. 1-2 years' experience in invoicing Ability to manage multiple applications at once (Concur, Oracle, SAP) Previous experience within a clinical trial setting or clinical research setting is highly preferred for this position • Experience with automated accounting systems. Strong knowledge of relational databases preferred. • Demonstrated familiarity with MS Office, especially Word, and Excel. • Demonstrated oral and written interpersonal, communication, analytical, presentation, and organizational skills. • Ability to meet deadlines/work independently. Must be adept at handling multiple assignments in a timely manner and meeting assigned deadlines. • Strong analytic skills and demonstrated capacity for accuracy. • Ability to interact with people at all levels of the organization in a professional manner. • Ability to maintain confidentiality of sensitive information. • Ability to analyze processes and procedures and recommend improvements. Preferred: • Bachelors Degree in Accounting, Business Administration or Computer Information Systems. • Prefer experience in a manufacturing environment and/or clinical research environment. • Experience with Microsoft SQL Server, Reporting Services, Analysis Services, a plus. Other Skills/Characteristics: • Working under general supervision, is accountable for completing assigned routine to moderately complex assignments accurately, on time and in accordance with departmental procedures. • Errors will have impact on team/organization results. • Takes initiative to ensure work is done accurately and completely. • Performs assignments of moderate complexity and in accordance with Company policy and procedures, within specified parameters, and in accordance with FDA rules and regulations. • Applies existing work methods to different known situations. • Problems involve recurring, routine to non-standard situations; usually consults with supervisor or more senior level personnel within the department on more complex problems.

A technology firm in San Francisco is seeking an Accounting Manager to manage its accounting operations. The role focuses on accounts payable, financial audit preparation, and team leadership. Ideal candidates will have a bachelor's degree in accounting, CPA certification, and over 7 years of experience, including supervisory roles. This opportunity includes significant day-to-day involvement and the chance to lead a dedicated team while ensuring compliance with accounting standards. #J-18808-Ljbffr

What You Bring: 10+ years of hands-on technical and leadership experience in fast-paced industrial manufacturing environments Bachelor's degree in Mechanical, Industrial, or a related Engineering discipline Proven leader with a track record of coaching, developing, and elevating high-performing teams Deep expertise in CMMS and Reliability-Centered Maintenance, with the ability to translate data into decisive action Strong Root Cause Analysis capabilities and a passion for building durable, failure-resistant systems U.S. citizen or green card holder What You'll Get: A premium, family-focused benefits package Competitive performance bonus, PTO, 401(k) with company match, and relocation support A clear, intentional career path with meaningful growth and leadership opportunity A high-velocity manufacturing environment where your decisions drive results, and your leadership makes a visible impact

Senior Site Safety & Health Specialist (Contract | Heavy Industrial Construction) 📍 Marcus Hook, PA (Per diem available) 🕒 Long-term contract with project-to-project continuity A leading EPC organization is seeking a Senior Site Safety & Health Specialist to support a large-scale heavy industrial construction project within the energy/petrochemical sector. This role is field-based and will serve as the primary safety leader on site, partnering closely with project management, craft leadership, and client safety teams. Key Responsibilities Lead and administer site-specific Safety & Health programs on heavy construction projects Ensure compliance with OSHA 1910/1926, NEC, NFPA, ANSI, and related standards Conduct daily field safety inspections, audits, and walkthroughs Manage subcontractor safety performance and corrective actions Exercise stop-work authority when conditions present immediate risk Investigate incidents, near misses, and property damage events; recommend countermeasures Deliver site safety orientations and ongoing safety training Maintain audit-ready safety documentation and daily safety reports Collaborate directly with client safety representatives and project leadership Required Qualifications Construction safety experience in heavy industrial, energy, petrochemical, power generation, or EPC environments Minimum experience based on education: Bachelor's degree + 7 years Associate degree + 9 years High school diploma/GED + 11 years Strong working knowledge of OSHA construction and general industry regulations Experience supporting high-risk activities such as confined space, hot work, crane & rigging, electrical/energized work Proficiency with Microsoft Word, Excel, and PowerPoint Valid driver's license and ability to travel to project sites Preferred Credentials OSHA 30 Construction STSC, CHST, CSP (or equivalent) Experience working with union craft labor and multi-subcontractor environments Background in EPC-led construction projects

Job Title: Clinical Payments Analyst I Client: Large Life Sciences Company Duration: 12 month contract with the possibility for extension WHAT YOU'LL DO This position is responsible for various financial analysis activities for the Clinical Study Payments Team including but not subject to, new study budget review, study and site budget set up, invoice processing, customer service inquiries. It is also responsible for various reporting and month end activities. Major and On-going Job Duties: Acts as a liaison and consultant for specific study team's monthly analysis, budgeting, quarterly forecasting, and annual strategic planning processes Responsible for generating and processing clinical study reimbursements which include invoices and quarterly payments Assist in the facilitation of new study budget set up, quarterly payments, and special reports Support internal and external audits by preparing and providing relevant reports and analysis Special project analysis and support involving clinical study payment data Work as a liaison with the Clinical Study Data Systems team for application enhancements Performs analysis of clinical study payment data per defined requirements Resolves and/or facilitates resolution of problems including identifying causes of problems to prevent re-occurrence of problems Promotes confidentiality of financial and other data at all times Reviews, updates, and adheres to all Standard Operating Procedures Researches payments issues for accuracy and presents findings to departments as necessary Review contract and grant agreements for financial risk and billing issues Prepares monthly projection analysis report for Clinical Trials which provides anticipated associated financial revenue for upcoming visits Reviews study budget in Clinical Study Payments Application to ensure proper visit accruals Other Duties: Remains current on developments in field(s) of expertise Performs related functions and responsibilities, on occasion, as assigned Experience & Training: Equivalent education level and experience required: Must have 1-3 years' experience in finance/accounting. 1-2 years' experience in invoicing Experience with automated accounting systems. Strong knowledge of relational databases preferred. Demonstrated familiarity with MS Office, especially Word, and Excel. Demonstrated oral and written interpersonal, communication, analytical, presentation, and organizational skills. Ability to meet deadlines/work independently. Must be adept at handling multiple assignments in a timely manner and meeting assigned deadlines. Strong analytic skills and demonstrated capacity for accuracy. Ability to interact with people at all levels of the organization in a professional manner. Ability to maintain confidentiality of sensitive information. Ability to analyze processes and procedures and recommend improvements. Preferred: Bachelors Degree in Accounting, Business Administration or Computer Information Systems. Prefer experience in a manufacturing environment and/or clinical research environment. Use of SAP Enterprise Software highly desirable. Experience with Microsoft SQL Server, Reporting Services, Analysis Services, a plus. Other Skills/Characteristics: Working under general supervision, is accountable for completing assigned routine to moderately complex assignments accurately, on time and in accordance with departmental procedures. Errors will have impact on team/organization results. Takes initiative to ensure work is done accurately and completely. Performs assignments of moderate complexity and in accordance with Company policy and procedures, within specified parameters, and in accordance with FDA rules and regulations. Applies existing work methods to different known situations. Problems involve recurring, routine to non-standard situations; usually consults with supervisor or more senior level personnel within the department on more complex problems.

A cutting-edge startup is seeking a Chief Manufacturing & Supply Chain Officer to lead the supply chain for their robotic cell-therapy manufacturing platform. This role encompasses supplier strategy, cost management, and production readiness, requiring extensive experience in supply chain leadership within regulated industries. The position demands strong project management and financial acumen to ensure operational excellence. With a competitive salary range of $200,000 to $300,000 annually plus equity, this is an exciting opportunity to join a mission-driven team. #J-18808-Ljbffr

Seeking an experienced Designer for growing Activewear division of Fashion client located near City of Industry , CA - Responsible for concept, design, and product development in the Women's Active/Athleisure segment - Collaborate with sales on private label accounts and execute graphics for all Co-Branded accounts - Analyze current sales trends and apply trend forecast to meet each retail partner's needs - Prepare Color and Style Cad designs prior to each season, ensuring achievable cost targets for retail partners - Communicate daily with the factory regarding fabric/trim sourcing/development tech packs and approvals - Manage sample process and timelines for appointment deadlines - Review protos and attend fit sessions, working closely with technical design team - Minimum 5 years' design experience in Women's Active/Athleisure - Team player with excellent time management, communication, and organizational skills - Proficient in Illustrator, Photoshop, Excel, Power Point Temp to Hire opportunity, fully in house onsite role

A leading technology company in San Jose is seeking a Machine Learning Engineer to drive the development and deployment of advanced ML technologies for FPGA compilers. You will enhance performance focusing on timing closure and resource utilization. Ideal candidates have a Bachelor's Degree in Computer Science or Electrical Engineering, along with 5+ years of experience in machine learning, and proficiency in C++ and Python. The role demands strong communication skills for effective collaboration across teams. #J-18808-Ljbffr

The Truckee area Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Project Engineer will be reporting to the Project Manager and/or Superintendent. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs. Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 3 years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

Inventory Specialist I (Expendable & Non-Expendable Assets) Employment Type: Full-Time Contract The Inventory Specialist is responsible for managing and controlling an assigned class of EX material for a VA Health Care System (HCS) and supported catchment area. This role serves as a subject matter expert for EX commodity management and supports logistics coordination, inventory forecasting, and strategic planning efforts across the organization. Key Responsibilities Manages and controls an assigned class of EX material for a VA HCS and supported catchment area. Recognized as an authority on EX commodity management and serves as a subject matter expert to all services and service lines. Acts as a central point of contact for the coordination of commodity support and the resolution of logistics problems across organizational lines. Acts as a focal point for new EX supply procedures. Analyzes data to include demand history, program requirements, VA HCS operations, procurement lead-time, current stock levels and other factors. Uses a range of well-established and commonly applied inventory principles, standard and nonstandard methodologies, and concepts to determine need to intervene in the supply system in response to fluctuations in rates of usage, cost, availability for established suppliers, alternative sources of supply and other similar conditions. Proactively engages customers to make recommendations for product changes, substitutions, and additions to product lines with a focus on increasing supply economy and efficiency. Applies knowledge of systems, techniques, and underlying management concepts, for determining, regulating, and controlling the level and flow of supplies. Forecasts short and long-range inventory needs considering changes in medical and surgical technologies, clinical scheduling changes, and program requirements. Participates in VISN and facility strategic planning to support major and minor projects and initiatives, ensuring that supply needs are met while considering cost, policies/procedures, sources of supply, and other variables. Minimum Qualifications Experience in inventory management, logistics, supply chain, or materials management, preferably within a healthcare or federal environment Demonstrated knowledge of inventory control principles and commodity management practices Experience analyzing inventory data, demand history, and supply usage trends Ability to apply inventory methodologies to regulate and control supply levels and flow Strong communication skills with the ability to coordinate across organizational lines Proficiency using inventory management systems and standard office software Ability to work independently and exercise sound judgment Must meet all VA background investigation and security requirements

Job Title: Contract Administrator/ Specialist Pay: $39.00 - $45 hourly for an aerospace/defense company!!! APPLY NOW Responsibilities: Contract review experience of terms and conditions Understanding of government contracts Understanding of FARs / DFARs clauses Any pricing experience would be a positive (not necessary but preferred) Any experience with portal management or extracting documentation from portals (not necessary but preferred) Any experience with an ERP system (preferred) JOB SUMMARY Represent the company in the procurement, negotiation, and administration of non-complex contracts for goods or services. Ensure that contracts with customers are satisfactorily fulfilled and that favorable relationships with customer are maintained. Typical duties include providing interpretation of contract provisions, screening and processing customer inquiries to ensure proactive monitoring of work performed under the contract, preparing periodic report, identification of estimated completion dates, and prompt handling of customer problems. Participate in the development of non-complex proposals, negotiation of new contracts, and renegotiation of existing contracts. Support New Business Development/Marketing function. ESSENTIAL DUTIES & RESPONSIBILITIES: Responsible for the management and administration of assigned contracts, negotiation of balanced and fair Terms & Conditions, compliance with contract requirements, and mitigation of MDSI business risk. Perform negotiations, monitor cost and schedule status, prepare Estimates to Complete (ETC), and take action(s) to correct problem areas when identified. Monitor On-time Delivery, quality, and payment status of assigned contracts. Identify any issues and initiate corrective action(s) as appropriate. Review customer solicitations and provide the Director, Contracts & Pricing, Senior CA-Lead, or other designated supervision interpretation and risk assessment of the Terms & Conditions, Scope of Work, and other provisions contained therein. Participate in the review of, and subsequent transmittal of approved proposals to customers. Disseminate information, facilitate communication, and coordinate activities of other functional departments in meeting contract requirements. Resolve conflicting schedules and/or competing resource requirements. Participate in the development of proposals and negotiation of new contracts or modifications thereto. Serve as primary point of contact for all assigned contracts, and secondary point of contact on all others. Maintain accurate, complete and well-organized contract files documenting all contract actions, correspondence, and problems experienced (including actions taken). Identify, initiate, and document actions taken to ensure customer compliance with contractual obligations, including flow-down clauses/provisions for incorporation into Purchasing Department vendor orders. MDSI Program Managers in managing and meeting all MDSI contractual obligations. Interface with Accounting to resolve payment problems on assigned contracts. Ensure timely and proper closeout of completed contracts. Coordinate with the Trade Compliance Officer to process all required import/export license applications, and administer all issued licenses. Timely/accurate/complete data entry within CostPoint. With oversight, perform Program Manager functions on assigned contracts. NON ESSENTIAL DUTIES • Assist the department in developing systems and procedures for the management and administration of contracts. • Participate in “action teams” engaged in the resolution of internal problems and / or in the development of new methods, procedures, or tools for the general management of company business. EDUCATION AND EXPERIENCE Bachelor's degree (B.A./B.S.) from four-year college or university

Alvarez & Marsal (A&M) is a global consulting firm with over 10,000 entrepreneurial, action and results‑oriented professionals in over 40 countries. We take a hands‑on approach to solving our clients' problems and assisting them in reaching their potential. Our culture celebrates independent thinkers and doers who positively impact our clients and shape our industry. The collaborative environment and engaging work-guided by A&M's core values of Integrity, Quality, Objectivity, Fun, Personal Reward, and Inclusive Diversity-are why our people love working at A&M. About Alvarez & Marsal Alvarez & Marsal (A&M) is a global consulting firm with over 10,000 entrepreneurial, action and results‑oriented professionals in over 40 countries. We take a hands‑on approach to solving our clients' problems and assisting them in reaching their potential. Our culture celebrates independent thinkers and doers who positively impact our clients and shape our industry. The collaborative environment and engaging work-guided by A&M's core values of Integrity, Quality, Objectivity, Fun, Personal Reward, and Inclusive Diversity-are why our people love working at A&M. The Team The Healthcare Industry Group, a subsidiary of A&M, is at the forefront of delivering transformational change to the healthcare industry. Known as an established leader that delivers tangible results for healthcare executives, boards, private equity firms, investors, law firms and government agencies, our professionals advise organizations on financial and operational performance improvement, strategic growth and unlocking value across the investment lifecycle. Our team provides additional expertise in interim management, restructuring, revenue cycle management, mergers and acquisitions, compliance and regulatory, digital technology and analytics. You will have the opportunity to work with clients in a variety of sectors including health systems and providers, physician groups, ancillary providers, medical schools, vision, laboratory, dental and behavioral health; managed care and health plans, government plans and programs, healthcare investors and lenders, medical devices, healthcare suppliers and infrastructure, and life sciences. How you will contribute As a Director you will be leading a team and acting as the main conduit between healthcare clients and our team on a range of complex assignments. You will manage projects by overseeing interview activities, gathering of relevant data, developing goals and deadlines, reviewing work product of junior staff, and communicating with clients directly. Depending on the client project the responsibilities of a Director may typically include: Engaging with clients to foster trust, credibility, and compatible relationships. Assessing how clients are approaching their businesses. Engaging in c‑suite and board‑level conversations regarding the challenges facing them and strategic initiatives for solving them. Swiftly assessing business needs and designing and implementing measurable solutions that span all aspects of revenue cycle operations. Communicating regularly with clients and project team members, escalating any matters that require additional attention and consideration from engagement leadership. Providing guidance to manage a client through crisis. Collaborating and aligning with representatives from other service lines. Effectively managing client project plans, including defining, prioritizing, and sequencing work to meet deadlines and manage on‑time deliverables. Managing performance of project teams, including assigning and delegating project responsibilities and providing on‑the‑job coaching and constructive feedback; mentoring junior staff. Improving client tracking tools and developing KPIs and metrics to identify and quantify operational performance improvement opportunities for one‑time cash acceleration and recurring income statement benefit. Redesigning and implementing leading‑practice workflows, addressing deficits in quality, and driving operational and financial outcomes across different levels of healthcare organizations. Knowledge of engagement economics and overall product delivery, budgeting, and timely billing & collections including managing the implementation risk and profitability for smaller scale projects. Developing and delivering high‑quality work products, utilizing both qualitative and quantitative data, including cash waterfalls, payment velocity, cost‑to‑collect, and others. Utilizing experience and expertise to effectively function in interim roles (e.g., VP Revenue Cycle, other). Developing clear transition and handing‑off plans to ensure improvements are sustainable. Building relationships with clients and seeking opportunities to expand the scope of business while generating leads. Acting as an integral member of sales team developing significant portions of proposal and pitch documents. We are seeking someone to join our team with an entrepreneurial and collaborative mindset who will manage ambiguity and thrive in a fast‑paced environment. As a Director you will have the opportunity to develop a team environment where you and your team members embrace a commitment to quality work and continuous improvement. You will use your judgment to assign and delegate project responsibilities while balancing the need for efficiency and providing on‑the‑job training opportunities to further develop staff skillsets. Revenue cycle projects may include, but are not limited to: due diligences, performance assessments, enterprise performance improvement, full‑scale implementations, and interim management for a broad range of healthcare providers and supporting services companies. We are not your typical consulting firm. We are entrepreneurial, action oriented and results driven professionals who take a hands‑on approach to solving our clients' problems and helping them drive value and growth. We are nimble, resourceful, proactive, can pivot to adapt quickly, when needed, and develop plans that drive real results. You will be part of a team that is passionate about delivering transformational change and making an impact in the healthcare industry. Qualifications High energy individuals and leaders with a passion for healthcare and solving complex issues. A minimum of Eight (8) years of prior work experience in healthcare, consulting or healthcare industry such as revenue cycle, hospital, accounting, audit, private equity, or healthcare operations with a healthcare focus. BA/BS degree and/or MBA/MS in Accounting, Finance, or other related healthcare fields such as MHA or MPH. Prior experience with revenue cycle in a hospital or larger health system. Experience with healthcare revenue cycle issues and solutions for improvement related to increasing collections, reducing DSOs, increasing efficiencies and detailed knowledge of government and third‑party payors. Advanced Microsoft Excel, PowerPoint, and Word skills a must; experience with Tableau, SQL, SPSS, Power BI, Action O‑I benchmarking, MGMA survey data are a plus. In‑depth knowledge of Revenue Cycle systems, operations, and regulations. Experience with workflow redesign and system implementation. Ability to identify key operational performance drivers and flexibility to support clients with a broad array of issues. Experience with managing client engagements, deliverables and workstreams while mentoring junior staff. Excellent verbal and written skills, with the ability to communicate with and present information to all levels of client personnel. Willingness and ability to travel as required. Your journey at A&M We recognize that our people are the driving force behind our success, which is why we prioritize an employee experience that fosters each person's unique professional and personal development. Our robust performance development process promotes continuous learning, rewards your contributions, and fosters a culture of meritocracy. With top‑notch training and on‑the‑job learning opportunities, you can acquire new skills and advance your career. We prioritize your well‑being, providing benefits and resources to support you on your personal journey. Our people consistently highlight the growth opportunities, our unique, entrepreneurial culture, and the fun we have together as their favorite aspects of working at A&M. The possibilities are endless for high‑performing and passionate professionals. Regular employees working 30 or more hours per week are also entitled to participate in Alvarez & Marsal Holdings' fringe benefits consisting of healthcare plans, flexible spending and savings accounts, life, AD&D, and disability coverages at rates determined from time to time as well as a 401(k) retirement plan. Provided the eligibility requirements are met, employees will also receive a discretionary contribution to their 401(k) from Alvarez & M'ral. Additionally, employees are eligible for paid time off including vacation, personal days, seventy‑two (72) hours of sick time (prorated for part time employees), ten federal holidays, one floating holiday, and parental leave. The amount of vacation and personal days available varies based on tenure and role type. Click here for more information regarding A&M's benefits programs. The annual base salary range is $160 - $180k commensurate with experience. In addition, A&M offers a discretionary bonus program which is based on a number of factors, including individual and firm performance. Please ask your recruiter for details. Alvarez & Marsal recruits on an ongoing basis. Candidates are considered as they apply, until the opportunity is filled. Candidates are encouraged to apply expeditiously to any role(s) that they are qualified for and that are of interest to them. A&M does not require or administer lie detector tests as a condition of employment or continued employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. #HBCU #LI-DNI #IND123 #J-18808-Ljbffr

The Principal Fire Protection and Wildfire Compliance Engineer is a highly specialized senior-level technical expert responsible for managing fire and life safety across the utility's infrastructure, with a specific focus on complex technical occupancies, hazardous environments, and comprehensive regulatory compliance. This role combines advanced fire protection engineering with a hands-on tactical understanding of emergency operations and a deep knowledge of specialized fire codes. The engineer will provide authoritative oversight of fire protection plan review and field inspections, integrating technical requirements into the utility's broader wildfire and property loss control strategies. Key Responsibilities Regulatory Plan Review and Enforcement Lead the fire protection plan review process for all utility facilities and construction projects, including those with special technical occupancies (e.g., generation plants, advanced control centers) and hazardous environments (e.g., fuel storage, chemical treatment facilities). Serve as the primary liaison with fire marshals, regulatory bodies, and other authorities having jurisdiction (AHJ) during plan reviews, inspections, and enforcement actions. Develop and maintain a robust system for tracking regulatory compliance, corrective actions, and documentation across all fire protection activities. Hazardous Environment and Special Occupancy Loss Control Conduct advanced risk assessments and loss control evaluations for special technical occupancies and areas with hazardous materials, identifying potential fire ignition sources, propagation risks, and mitigation measures. Specify and review the design of specialized fire suppression systems, detection systems, and fire-resistant construction for these high-risk areas, ensuring compliance with relevant NFPA standards (e.g., NFPA 30, NFPA 850) and OSHA requirements. Evaluate potential environmental impacts and associated regulatory reporting requirements related to fire and hazardous materials incidents. Utility and Wildfire Fire Operations Provide expert guidance and operational readiness evaluation, drawing on fire operations experience to inform the utility's wildfire response plans and procedures. Collaborate with internal and external fire agencies on pre-incident planning, tactical response strategies, and incident command system integration. Conduct post-incident analysis for fires impacting special occupancies or hazardous environments, using findings to drive improvements in engineering, procedures, and training. Program Evaluation and Risk Modeling Assess the effectiveness of the utility's Fire Prevention Plan (FPP) and Wildfire Mitigation Plan (WMP), particularly as they apply to hazardous environments and special occupancies. Manage and evaluate the use of wildfire risk modeling software and operational tools, incorporating specialized data related to hazardous materials and facility vulnerability. Cross-Functional and Executive Reporting Act as a technical subject matter expert for executive leadership and legal counsel, providing clear and concise report on fire protection compliance, loss control, and risk exposure. Lead cross-functional teams involving engineering, operations, safety, and environmental departments to ensure seamless integration of fire and life safety requirements. Qualifications Experience 10+ years of progressive experience in fire protection engineering, including extensive experience with regulatory plan review, field inspections, and loss control. Proven experience conducting fire and hazardous materials risk assessments in industrial or utility settings, particularly involving special technical occupancies and high-hazard environments. Demonstrated experience in fire operations, with a deep understanding of incident command, emergency response, and firefighting tactics. Expert-level knowledge of NFPA codes and standards applicable to utilities and hazardous environments (e.g., NFPA 30, 70, 850, 101). Education and Certification Bachelor's degree in Fire Protection Engineering, Electrical Engineering, or a related field. Master's degree preferred. Professional Engineer (PE) license is required. Certified Fire Protection Specialist (CFPS) is highly desirable. Skills Expert knowledge of fire science, hazardous materials behavior, electrical systems, and relevant regulatory codes (e.g., NFPA, OSHA, EPA). Advanced proficiency in plan review processes, inspection protocols, and fire investigation techniques. Exceptional written and verbal communication skills, with the ability to convey complex technical and regulatory information to diverse audiences, from field crews to executive leaders. Ability to balance technical requirements, regulatory mandates, and operational realities in a high-risk environment. Working Conditions Regular travel for inspections approximately 25% of the time. The role involves a mix of office-based work and significant fieldwork in diverse and potentially hazardous environments. The position demands flexibility and may require irregular hours during fire events, emergencies, and regulatory deadlines. #J-18808-Ljbffr

PagerDuty, Inc. (NYSE:PD) is a global leader in digital operations management. Trusted by nearly half of both the Fortune 500 and the Forbes AI 50, as well as approximately two-thirds of the Fortune 100, PagerDuty is essential for delivering always‑on digital experiences to modern businesses. Join us. At PagerDuty, you'll tackle complex problems, collaborate with kind and ambitious people, and help build a more equitable world-all in a flexible, award‑winning workplace. PagerDuty is seeking a Sr. Manager, Enterprise Applications (Finance) to join our team! You'll manage and support PagerDuty's broad portfolio of financial systems and applications, overseeing the following process areas from an IT systems perspective: Order to Cash/Order to Revenue, Procure to Pay, and Record to Report. You'll partner with stakeholder teams across Revenue, GL Accounting, Tax & Treasury, Procurement, FP&A, and Operations to deliver technical solutions that drive business success. As a people‑focused leader with strong cross‑functional project leadership skills and exceptional facilitation abilities, you'll oversee system strategy and implementation while championing process improvements to enable our continued growth. In this critical cross‑functional leadership role, you'll lead and develop a team of highly capable IT product managers and IT system administrators, using your leadership experience to grow and shape their careers. Key Responsibilities Set the Finance applications product vision and multi‑quarter roadmap, aligning technology initiatives with Finance and business objectives. Oversee the end‑to‑end delivery of Finance system initiatives from requirements gathering through launch and post‑launch support. Lead, mentor, and develop a high‑performing team of IT product managers and system administrators, focusing on career growth and professional development across diverse financial technology platforms while fostering a culture of continuous improvement, collaboration, and operational excellence. Lead large‑scale, cross‑functional projects that span multiple business units, managing competing priorities and ensuring successful delivery of complex initiatives while leveraging your experience managing finance stakeholders to maintain strong relationships and drive real change. Utilize strong facilitation skills to lead productive meetings, workshops, and requirements gathering sessions with diverse stakeholder groups, communicating effectively with finance stakeholders by speaking their language and translating complex technical concepts into business terms while understanding financial processes, controls, and reporting requirements. Draw on your experience to plan comprehensive roadmaps that align technology initiatives with business objectives and strategic priorities across multiple quarters and fiscal years, implementing and managing Agile and SCRUM processes to drive team performance and efficiency. Collaborate with your team to develop and maintain the strategy for our comprehensive suite of financial applications including ERP, Billing, Procurement, and other critical business systems, overseeing the end‑to‑end delivery of financial system initiatives from requirements gathering through to launch and post‑launch support. Stay current with NetSuite, Coupa, Zuora, and emerging technologies to recommend and implement best‑in‑class solutions while collaborating with Finance, Accounting, Revenue, Procurement, FP&A, and Operations leaders to define, prioritize, and deliver business requirements. Lead business, accounting, and workflow process improvements across finance, procurement, tax, audit, and security while defining and documenting detailed functional requirements for workflow automations and system integrations. Ensure robust change management and compliance with security, regulatory, and audit requirements, including SOX IT general controls, while maintaining comprehensive documentation for business objectives, use cases, system specifications, integrations, and customizations. Identify and recommend key technologies to support and improve business processes across the finance and people organization while supporting data integrations and automation efforts. Basic Qualifications 3+ years of people management experience in IT, Finance Systems, or a related field with 2+ years of hands‑on experience with financial ERP systems. Strong background in IT, with knowledge of accounting, internal controls, and their application within financial systems, plus experience managing teams responsible for diverse financial application portfolios and system integrations. Excellent communication, stakeholder management, and problem‑solving skills with the ability to speak “finance” and translate between technical and business stakeholders, combined with strong facilitation skills and experience leading cross‑functional meetings and requirements gathering sessions. Experience working in a SaaS or publicly traded company environment. Preferred Qualifications Experience with Zuora Billing, Zuora Revenue, NetSuite, and Coupa software, plus a proven track record of leading complex, cross‑functional projects involving multiple stakeholders and competing business priorities. Experience developing multi‑year technology roadmaps and strategic planning for enterprise applications, with familiarity with AI tools and their application in financial systems automation and process improvement. Experience with relational databases, ETL/integration and automation tools (e.g. Workato), and demonstrated ability to work independently, manage multiple priorities, and oversee complex projects. Experience with financial systems implementation and optimization to support international expansion, including multi‑currency operations, global compliance, and scalable processes across multiple regions. Bachelor's degree in Computer Science, Information Systems, Accounting, or a related field, or equivalent experience. The base salary range for this position is 164,000 - 276,000 USD. This role may also be eligible for bonus, commission, equity, and/or benefits. Our total rewards approach is competitive with industry standards and aligned with local laws and regulations. Benefits Company equity* ESPP (Employee Stock Purchase Program)* Retirement or pension plan* Generous paid vacation time Paid holidays and sick leave Dutonian Wellness Days & HibernationDuty - companywide paid days off in addition to PTO Paid parental leave: 22 weeks for pregnant parent, 12 weeks for non‑pregnant parent (some countries have longer leave standards and we comply with local laws)* Paid volunteer time off: 20 hours per year Mental wellness programs *Eligibility may vary by role, region, and tenure. Location Restrictions Australia: Northern Territory, Queensland, South Australia, Tasmania, Western Australia Canada: Alberta, Manitoba, Newfoundland, Northwest Territories, Nunavut, PEI, Quebec, Saskatchewan, Yukon United States: Alaska, Hawaii, Iowa, Louisiana, Mississippi, Nebraska, New Mexico, Oklahoma, Rhode Island, South Dakota, West Virginia, Wyoming PagerDuty is an equal‑opportunity employer. PagerDuty does not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, parental status, veteran status, or disability status. Your privacy is important to us. By submitting an application, you confirm that you have read and understand PagerDuty's Privacy Policy. PagerDuty is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application process. Should you require accommodation, please email accommodation@pagerduty.com and we will work with you to meet your accessibility needs. PagerDuty uses the E‑Verify employment verification program. #J-18808-Ljbffr

is for experienced Manual Machinist only. Not intended for Machine Operators. As a national leader in providing superior electro-mechanical repairs and services, we are currently seeking a 1st shift Manual Machinist for our machine shop. Since 1981, we have been a family-owned company instrumental in keeping national industries operational. We specialize in building, servicing, and selling industrial motors, controls, gearboxes, and related equipment for advanced electric motor systems. Our Machinists play a crucial role in performing complex machine tool operations to produce, fabricate, and repair precision parts for industrial motors. The position hours are 7:00 AM to 3:30 PM with a 30-minute unpaid lunch break. Responsibilities Set up and operations on engine lathes, vertical/horizontal mills, and vertical lathes Interpret blueprints to determine critical dimensions and machine set up Read micrometers, Vernier calipers, dial indicators and other precision measuring and test equipment as required Maintain low tolerances as indicated by specifications or drawings Determine speeds and feeds to obtain proper surface finish Adhere to all company EH&S and QMS processes Other duties as required, including some disassembly/assembly, repair and rebuilding of industrial equipment Qualifications Required: 3 or more years experience setting up and operating manual lathes and mills Able to read and interpret blueprints and engineering drawings Able to read micrometers, Vernier calipers, dial indicators and other precision measuring and test equipment Able to work overtime; typically throughout the week and occasionally on weekends Preferred: Welding experience including set up welder and perform welding tasks using GMAW, GTAW, SMAW Technical/vocational degree in Machining Good computer skills High School diploma or GED equivalent Motor Technology, Inc. is committed to fostering a supportive, valued, and motivated work environment that encourages teamwork, innovation, personal and professional growth, and work-life balance. Our comprehensive employee benefits package includes: a 401k with a match up to 8% medical, dental, and vision insurance for employees, spouses, and dependents employer-paid short-term disability and life insurance voluntary insurance options at a group rate paid time off seven paid holidays annual performance and salary reviews Motor Technology, Inc. is an equal opportunity employer committed to applying fair practices in all aspects of employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, or any other protected characteristic.

Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at ***************** and embark on a rewarding career journey with Austin. Summary/Objective The Austin Company performs design-build work for industrial and specialized commercial markets. The Electrical Intern actively works with in-house engineers, architects, and construction departments to assist with ongoing functions. Additionally, each intern participates in an interactive intern-specific project requiring coordination amongst the various engineering and architectural design disciplines. Throughout the summer, the interns choose a project, decide a site location, and bring their project idea to life with engineering design and collaboration efforts. Finally, a proposal and presentation are assembled, in which the interns pitch their design proposal to the architectural, engineering, construction and marketing professionals in the office. By the end of the summer internship, students gain an understanding for the project cycle. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions Utilization of Revit, Revizto, Visual Lighting, Bluebeam and Procore to aid in project support. Assists in electrical equipment and device selection and layout, life safety equipment selection and layout, and develops equipment schedules. Performs calculations for specific tasks defined by a discipline mentor. Provides Revit design drawings of sketches prepared by other team members. Participates in departmental and design review meetings. With the assistance of discipline mentor, reads and understands drawings and specifications. For the Intern Project, The Electrical Intern duties are: Coordinates with other construction, architectural and engineering disciplines. Selects appropriate power distribution equipment for the project. Selects appropriate lighting for the project. Provides load, voltage drop, conduit fill and photometric calculations; design and layout for power distribution equipment and lighting. Creates Revit drawings, including one-line diagram, area plans, equipment details. Circuits equipment in Revit to create panel schedules. Conducts quantity take-offs and compiles an estimate of all related electrical components in the project. Aids with the project proposal and presents final design to architectural, engineering, construction and marketing professionals in the office. Required Education and Experience Actively enrolled in a 4 or 5-year degree program in Engineering. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The pay for this position in California is $25.00 per hour. The Austin Company is an EEO and DFWP Employer Austin is wholly owned subsidiary of Kajima.