Numerical control operator jobs in Castaic, CA

Job Details 0T534 CA - El Monte, CA Full Time $33.45 - $40.30 Hourly 2nd ShiftDescription Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. The Gill Corporation is seeking a Sr. CNC Operator who produces machined parts, sets up and operates computer numerical control (CNC) machines, maintaining quality and safety standards. Reporting to the Production Supervisor, they will perform but not be limited to the following responsibilities. Responsibilities: Reviews work orders, blueprints, engineering plans, materials, specifications, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Sets-up conventional CNC mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; trimming heads. Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to standards. Using machine controls, retrieves programs from the network. Changes cutting tools and location of work piece during machining process as specified in setup instructions. Measures work piece for conformance to specifications. Notifies supervisor of discrepancies. Check cutter size and wear. Also add edits to accommodate actual cutter diameter to prevent parts not meeting tolerances. Performs all work in accordance with TGC Procedures, Safety and ISO Standards. Provides support to all CNC operators and programmers Recommend and implement best CNC/Machining practices Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: Must be able to communicate effectively in English both verbally and in writing Understand drawings, ASME Y14.5 geometric tolerances Understand CNC machine programming concepts Ability to satisfactorily use computer based software tools Minimum of 10 years of experience with 3, 4 or 5 axis machining. Strong mechanical aptitude Must be able to understand complex manufacturing processes Must be able to lift, push and pull a minimum of 50 lbs. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Career CategoryScientificJob DescriptionJoin Amgen's Mission of Serving Patients At Amgen, if you feel like you're part of something bigger, it's because you are. Our shared mission-to serve patients living with serious illnesses-drives all that we do. Since 1980, we've helped pioneer the world of biotech in our fight against the world's toughest diseases. With our focus on four therapeutic areas -Oncology, Inflammation, General Medicine, and Rare Disease- we reach millions of patients each year. As a member of the Amgen team, you'll help make a lasting impact on the lives of patients as we research, manufacture, and deliver innovative medicines to help people live longer, fuller happier lives. Our award-winning culture is collaborative, innovative, and science based. If you have a passion for challenges and the opportunities that lie within them, you'll thrive as part of the Amgen team. Join us and transform the lives of patients while transforming your career. Robotics Platform OperatorWhat you will do Let's do this. Let's change the world. Amgen is seeking a dedicated and motivated individual to join the Automated Screening Platform (ASP) team in Thousand Oaks, CA. In this vital role, you will be responsible for the day-to-day operation of integrated automation platform(s) that support the early drug discovery efforts of the Lead Discovery & Characterization department. As such, the successful candidate will work in a highly collaborative and fast-paced environment to maintain platform readiness and create, test, optimize and efficiently execute automated high-throughput protocols to support the work of Amgen's Research Scientists and ensure the delivery of high-quality results in a timely manner. Key Responsibilities: Daily operation of robotic platform(s) & laboratory automation to execute a variety of processes to include but not limited to high-throughput biochemical and cell-based assays, cell culture and maintenance, high content imaging, and automated microscale chemical synthesis. Performing quality control and calibration of equipment for both accuracy & precision. Troubleshooting of various lab instrumentation and automation. Optimizing workflows and protocols to increase throughput, improve data quality, and/or reduce consumable consumption. Assisting scientists to successfully develop, transfer and execute processes on the integrated platforms and ancillary equipment. Efficiently manage execution of both scheduled and ad-hoc maintenance of robotic platforms and associated equipment by aligning both internal stakeholders and external vendors. Ensuring all tasks and responsibilities are performed according to industry-leading scientific standards & accurately documented in SOPs. Monitoring technological developments in the field & evaluation of new technologies Maintaining consumable inventories for robotic platforms What we expect from you We are all different, yet we all use our unique contributions to serve patients. The dynamic professional we seek is a self-starter with these qualifications. Basic Qualifications: Master's Degree Or Bachelor's Degree and 2 years of experience in the field of automated platform operation Or Associate's degree and 4 years of experience in the field of automated platform operation Or High school diploma/GED and 6 years of experience in the field of automated platform operation Preferred Qualifications: Master's in either chemical biology, biology, chemistry, or a relevant field Experience in operating and maintaining integrated lab automation platforms, ideally. Experience programming scheduling software. Basic understanding of electrical, mechanical, fluidic, and pneumatic systems, as well as knowledge of the software controlling the instruments and integrated systems. Experience running and troubleshooting lab instrumentation, including but not limited to liquid handlers, acoustic dispensers, multi-mode plate readers, compound transfer devices, etc. Ability to adapt to a constantly evolving environment Proven troubleshooting and problem-solving skills Strong organizational skills and attention to detail Demonstrated ability to work in teams Demonstrated successful interpersonal relationships with peers and colleagues in other scientific disciplines High level of self-motivation and flexibility What you can expect from us As we work to develop treatments that take care of others, we also work to care for your professional and personal growth and well-being. From our competitive benefits to our collaborative culture, we'll support your journey every step of the way. The expected annual salary range for this role in the U.S. (excluding Puerto Rico) is posted. Actual salary will vary based on several factors including but not limited to, relevant skills, experience, and qualifications. In addition to the base salary, Amgen offers a Total Rewards Plan, based on eligibility, comprising health and welfare plans for staff and eligible dependents, financial plans with opportunities to save towards retirement or other goals, work/life balance, and career development opportunities that may include: A comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts A discretionary annual bonus program, or for field sales representatives, a sales-based incentive plan Stock-based long-term incentives Award-winning time-off plans Flexible work models, including remote and hybrid work arrangements, where possible Apply now for a career that defies imagination Objects in your future are closer than they appear. Join us. careers.amgen.com In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Application deadline Amgen does not have an application deadline for this position; we will continue accepting applications until we receive enough or select a candidate for the position. As an organization dedicated to improving the quality of life for people around the world, Amgen fosters an inclusive environment of diverse, ethical, committed and highly accomplished people who respect each other and live the Amgen values to continue advancing science to serve patients. Together, we compete in the fight against serious disease. Amgen is an Equal Opportunity employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status, or any other basis protected by applicable law. We will ensure that individuals with disabilities are provided with reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. . Salary Range 87,310.00 USD - 101,426.00 USD

Velocity Aerospace Group is a subsidiary of Precision Aviation Group (PAG), a full service, inventory supported MRO provider in the aviation industry with 21 domestic and international business units. Velocity operates 3 repair stations, specializing in the repair, overhaul, installation and upgrade of electromechanical, digital, pneumatic, avionic, and gyroscopic components for aircraft operators and maintainers in the commercial/regional airline, government and defense operation, business and general aviation markets. A CNC programmer writes code to automate power driven machines that cut and finish metal, wood or plastic such as lathes, grinders and mills. Key Responsibilities •Creates instructions for machinists. •Reviews 3D CAD design blueprints. •Makes calculations for programming including where materials should be cut. •Translates instructions into a computer automated manufacturing (CAM) program. •Communicates with engineers and clients who will use the programs. •Checks completed programs by running simulations or tests. •Prepares geometric layout of designs using proper software. •Determines sequence of operations in a program. •Chooses cutting tools that will be needed. •Analyzes job order and performs necessary calculations. •Writes programs and modifies existing ones for increased efficiency. •Analyzes and selects speeds and cutting tools for programs. •Makes improvements to set up times for a task and contouring of complex shapes. •Simplifies tooling time for workers and increases productivity for the client. •Evaluates all completed designs to validate their functions and ensure they successfully reduce time and money for the client. •Monitors all programs to make sure they follow blueprint instructions and safely and successfully complete the task. •Provides training for clients on automated systems. •Complies with all safety rules and regulations. Abilities & Qualificationv Ability to coordinate and work well with other departments and individuals within organization. Have strong team orientation. Competency in Microsoft Office, especially Excel. Excellent interpersonal, written & verbal communication skills Strong analytical skills, and the ability to summarize data and trends clearly Must have superior computer programming skills. Must have excellent reading comprehension skills. Good math skills, especially algebra, trigonometry and physics. Strong software development/engineering skills Creative problem solving and experimental design Experience with of CAD software Education and Experience Associate's degree in CNC programming, a computer-related field or a mechanical field. Bachelor's degree in computer programming or computer-related field.

Operate CNC lathe machines to manufacture high-precision parts according to technical specifications and customer requirements. Machine setup and operation: Set up and operate CNC lathes, including selecting and installing tools, attachments, and accessories. Technical interpretation: Read and interpret blueprints, engineering drawings, and work orders to determine machining operations, dimensions, and tolerances. Monitor production: Observe machine operations to ensure parts meet specifications and production runs efficiently. Adjustments and optimization: Make real-time machine setting adjustments to maintain quality, minimize scrap, and improve cycle times. Precision inspection: Use precision measuring tools such as micrometers, calipers, and gauges to inspect parts and verify conformance. Routine maintenance: Perform basic maintenance and cleaning to ensure machines are in optimal working condition. Safety compliance: Follow all company safety procedures and OSHA regulations during operation and maintenance activities. Collaboration: Communicate with supervisors, programmers, and team members to resolve issues and meet production goals.

CNC Machinist Pay: $21.00 - $45.00 per hour 🎥 Get a glimpse of our shop and team: Watch our video About the Job We're looking for skilled and experienced CNC Machinists to join our team in South El Monte. You'll be setting up and running CNC lathes and mills to produce high-quality aerospace parts with precision and efficiency. This role is perfect for someone who takes pride in their work and values craftsmanship, safety, and collaboration. What You'll Do Set up and operate CNC lathes and mills Load tools, fixtures, and materials accurately Read blueprints and apply shop math for precise machining Adjust offsets and edit programs when needed Inspect parts to ensure they meet specs and quality standards Follow all machining safety practices Assist in R&D and prototype work (if experienced) Collaborate with the team on improvements and efficiency What You Need Minimum 1 year of CNC machining experience or relevant training Ability to read and interpret blueprints Understanding of speeds, feeds, and tooling concepts Familiarity with G-code and CNC controls Strong attention to detail and quality CAD/CAM (Mastercam, SolidWorks) experience is a plus Physical Requirements Stand, walk, and use hands frequently Lift up to 50 lbs when needed Why Work With Us Health Coverage: 100% paid medical, dental, and vision for employees 401K + Profit Sharing Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years 7 Paid Holidays Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts Career Growth: On-the-job training, cross-training, and up to $1,000/year for education Overtime Opportunities 📍 Apply today and build your future in precision aerospace manufacturing. Learn more about our benefits Monday- Friday 6:30am-3:00pm (Overtime available)

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. About the Role: The Machinist will set up and operate OD/ID gear grinding machines to correct R/O, perpendicularity, parallelism, concentricity on shafts, splines, and gears (spur, helical, and double helical). What You Will Do: * Follow specific instructions to set up and operate OD/ID grinding machines and to operate associated wheel dress and balancing equipment (60% of job) * Use a variety of hand tools, gauges and dial indicators to install involute cams, yokes, arbors, work piece, etc. * Use optical equipment to present wheel dresser tools; balance and dress wheels as required, indicate work piece between bench centers prior to loading grinder and make any other adjustments and/or calculations necessary to meet quality standards (20% of job) * Check and monitor machine operations, check finished part prior to unloading and obtain any required dimensional verification. * Visually check parts for finish, and for indications of surface burn or tempering (10-15% of job) * Maintain records of all finish dimensions and obtain inspection acceptance of finished part * Perform other related work of a comparable or lower skill level as related to gear machining and check work of other operators as required * Perform operator checklist as required and comply with all EH&S procedures * As required segregate waste material and follow good housekeeping practices * May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills What You Have: * High School Diploma, GED or equivalent * Make calculations involving shop mathematics and handbook formulas including algebra and trigonometry * Use precision instruments such as dial indicators, micrometers, height gages, snap gages, ring gages and gear measuring wires * Equivalent to 2 years high school plus 2 to 3 years trades training * Experience 1 to 2 years Preferred Candidates will have the following: * CNC Experience with ability to program * Have working knowledge of GD&T Summary Pay Range: $30.15 - $45.23 Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * Sign on bonus * These benefits also apply to part-time employees Payroll transfer is not available for this position. For any position that will require you to work two or more hours per week on average within the unincorporated areas of Los Angeles County, please note that the Company will consider qualified applicants with arrest or conviction records in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Hourly Pay Range: $37.25-$41.00 **All Applicants must comply with ITAR Requirements. US Citizens or Permanent Residents only** Summary: Reporting to the Head of Machining Operations, the Machinist III is responsible for operating manual and CNC machine tools, including 5-axis gantry mills, vertical and horizontal milling centers, horizontal and vertical turning centers, etc. in support of production and development machining. Critical thinking and collaboration are required to evaluate and resolve unique equipment and product issues in a demanding production environment. Core Responsibilities: All functions of a Machinist II Communicate with other departments to keep product flowing Ensure the personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter Proper selection of tools per application Apply understanding of CAM programs including but not limited to: Mastercam, Fusion 360 Apply advanced understanding of probe cycles and functions Read and interpret customer and internal drawings related to checking parts Inspect 1st article parts that do not require CMM, GOM, VeriSerf layout Additional Responsibilities: Other duties as assigned Qualifications: Must be able to comply with ITAR and EAR residency requirements Demonstrated knowledge of machining procedures and practices Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proven track record of operating safe facilities. Fluent in English; Bi-lingual is a plus Education/Experience: High school diploma or equivalent A minimum of 5 years of experience in a manufacturing environment operating CNC mills and lathes. (with) completion of vocational training or an apprenticeship Skills: Required: All skills required of a Machinist II Effective communication techniques for collaboration with other departments Methods for ensuring personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter Demonstrate proper selection of tools per application Understanding of CAM programs including but not limited to: Mastercam, Fusion 360 Advanced understanding of probe cycles and functions Ability to read and interpret customer and internal drawings related to checking parts Inspect 1st article parts that don't require CMM, GOM, VeriSerf layout

At Starpath Robotics, we're shaping the future of robotics through precision engineering and bold ideas. Our work thrives on the edge of what's possible - and we're looking for people who want to push those boundaries with us. We value craftsmanship, speed, and ownership. If you're passionate about creating high-precision components that directly fuel next-generation in space, you'll fit right in. The Role We're hiring a Senior CNC Programmer & Machinist with deep expertise in 3-axis CNC milling, 4th-axis rotary, and 5-axis experience strongly preferred. This role requires mastery in CNC programming, machining, set-ups, problem-solving at the machine and program level, and the ability to take ownership from design handoff through finished part. While this is a senior-level role, we're also open to exceptional candidates who can prove their skills and perform at their relative level. Responsibilities Program and operate CNC mills (3-axis, 4th-axis rotary, 5-axis preferred) to support precision aerospace robotics manufacturing. HASS UMC 750 (5-axis) & HASS VF- series, machines. As well as conventional turning & milling as needed. Create, edit, and optimize programs for HASS G-code, using Fusion CAM (Autodesk product), Mastercam, or NX CAM (other CAM system experience accepted). Interpret engineering drawings, CAD/CAM/.STP/3D models, and GD&T requirements to produce efficient machining strategies. Generate tool lists. Perform set ups and operate CNC machines. Maintain records of mark ups on prints, save programs, setup sheets, and tool lists. Select and optimize tooling, adjusting speeds/feeds for efficiency and tool life. Design and machine fixture tooling as required. Work closely with engineering teams, production teams, and provide feedback to improve manufacturability. Take ownership of the machine shop, be an asset in troubleshooting, and optimization. Mentor teammates and share best practices to raise the bar across the team. Pitch in beyond machining when needed - including assisting with assembly of our. products - to ensure team success. Help with necessary maintenance, cleanliness, up-keep and repairs of machinery to the best of your ability. Basic Qualifications High school diploma or equivalent. 5+ years of CNC programming and machining experience. Deep mastery of 3-axis CNC milling, with exposure to 4th-axis rotary, & 5-axis machining (preferred). Proficiency in Haas control operation & programming (G-code). Experience with Mastercam (preferred), Fusion, or NX CAM, though strong skills in other CAM platforms are acceptable. Preferred Skills & Experience 8+ years of CNC programming and machining experience. Expertise in programming and operating multi-axis mill and lathe CNC machines. Strong background in complex surfacing, swarf cuts, contours, and aerospace style applications. Experience optimizing processes for productivity, quality, and repeatability. Familiarity with feeds/speeds/tooling types for different material types; 6061/7075 ALM, 300/400 series stainless steel, carbon steels, Inconel, plastics, & similar. Experience mentoring others or leading shop projects. Additional Requirements Ability to lift up to 25 lbs. unassisted. Frequent standing, bending, grasping, pulling, and other shop-floor activities required. U.S. Person status required (citizen, permanent resident, refugee, or asylee) due to export control regulations. Compensation & Benefits for Production Roles Level 1: $25.00 - $32.00/hour Level 2: $32.00 - $40.00/hour Level 3 (Senior): $40.00 - $53.00/hour Actual level and pay determined based on skills, experience, and interview performance. OVERTIME PAY POSSIBLE: Can be offered during peak build cycles. At Starpath Robotics, base pay is just one part of your total rewards package. We also offer: Generous benefits including health, dental, vision, and retirement plans. Paid time off, holidays, and flexible policies to support balance. Professional growth opportunities through training and development. The chance to own high-impact work that directly shapes the future of robotics & space! A collaborative, mission-driven culture where craftsmanship and innovation are celebrated. EAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Who is FMI? FMI Aerostructures is one of the largest independent manufacturing businesses serving the aerospace & defense industry. Our 250-member team has been a trusted supply chain partner that manufactures critical structural components and complex assemblies for major aerospace players for over 40 years. Why FMI makes a difference? Customers are at the center of everything at FMI. We are excited that this team can work with key partners like Northrop Grumman and Lockheed Martin using our critical components to help important new aerospace programs take flight. Our machinists are the best in the industry, and we are investing to support their continued success. When they win, our customers win. Why FMI could be the right fit for your career? This is an opportunity to work locally for a long-standing, stable business that is investing to grow. Summary: CNC Machinists are highly skilled professionals, able to work with great concentration and precision. They must be responsible and comply with all safety guidelines. A keen eye for detail and great mechanical aptitude are also essential. Essential Duties and Responsibilities: · Requires using hands to handle tools or controls · Requires repetitive movement · Must have vision (with or without assistance) capable of seeing small objects at a close distance · Requires prolonged standing/sitting · Requires lifting up to 25lbs Responsibilities: · Call up CNC programs · Set-up machine and produce parts · Set up equipment/machinery and install equipment or attachments on machinery or related structures · Read and understand job traveler instructions, technical drawings and set-up diagrams · Measure and record products or materials to control quality · Monitor machinery/equipment operation to detect problems · Use hand tools; Adjust production equipment / machinery setup · Load or unload material onto machinery · Clean equipment or machinery · Apply Procedures and Work Instructions Requirements Required Skills / Experience: - Ability to read, comprehend and follow instructions and directions - Must be able to read, speak, write and understand English - Ability to read blueprints - Knowledge and the ability to read and understand 1/1000-, 1/100- and 1/10-inch measurements- G and M codes · Compare for correctness, count accurately · Good communication skills · Good interpersonal skills · Self-starter with demonstrated ability to achieve results · Basic mathematics for daily use formulas · Positive attitude, Team player, Manufacturing/CNC experience/background, Cleanroom experience · High school diploma, GED or five (5) years' work experience. · This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk and climb or balance. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to high, precarious places and vibration. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually quiet to moderate. Salary Description $22 - $40

For the past 60 years, Accratronics Seal Corporation has specialized in Glass-to-Metal, hermetically sealed connectors, and precision machining. Our parts have been on most NASA missions since Gemini II, and are used for thousands of aerospace, defense, and space exploration applications. At Accratronics, you will actively contribute to successful missions putting men and women into space and protecting our armed service men and women around the world. We believe that our strengths are built on our most important resource - our people. If this is the culture and work environment you are seeking, then Accratronics is the place for you! Job Description Roles and Responsibilities: Principal duties and responsibilities include the following. Other duties may be assigned. 2nd Shift is Monday - Friday, 4:30 pm - 3:00 am. Complete tool, fixture, and material setup on CNC Swiss style machine (Dual Spindle Dual Turret). Eurotech Rapido type machines. Running first piece article ready for inspection. Verifying parts by using precision measuring equipment. Changing tools and offsets based in cutting conditions. Using proper methodology and cutting tools to produce quality parts that adhere to production and quality standards. Using proper feed, speed, and other cutting parameters based on work piece metals such as aluminum, stainless steel, Inconel etc. Revising programs as needed based on engineering or production required changes. Participating in troubleshooting on CNC programming and production related issues on the shop floor. Other similar or related duties as required. Some post processing of hardware. Requirements: Must be able to read and interpret engineering drawings and blueprints. Minimum 3-5 years' experience in CNC operation with setup experience. Experience with dual spindle dual turret type of lathe or Swiss machine a plus. Some programming software experience is a plus. General knowledge of GD&T and inspection tools. Minimum High school education or equivalent. Machinist trade certification a plus. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate with others effectively in both written and verbal fashion. Experience with precision inspection tooling (calipers, thread gauges, micrometers, bore gauges, air gauges etc.) Compensation: Salary Range: $23.00 - $28.00 per hour with 10% shift premium in addition to base rate. Minimum of ten (10) hours of over-time available weekly. Salary is determined by the applicant's education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Accratronics Seals Corp. is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

Sets Up and Operates CNC Machining Centers to produce parts to Customer Specifications. Loads and Runs as well as modifies CNC programs. De-Burrs parts and cleans as time allows. Inputs Simple Programs at the Operator panel and Loads and Off-Loads Production Programs. Creates Fixtures for Production Parts as necessary. Performs routine maintenance on Machining Centers. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Using written and verbal instructions and working from Blueprints Sets Up CNC Machining Centers for single parts and production runs. Submits First Article Parts to QC and analyses Inspection reports to adjust programs and set ups to produce an acceptable part. Use Band Saws and simple tools such as Hex Wrenches, Screw Drivers and Soft Hammers. Changes Dull Tooling and adjusts Machine Offsets. Checks Part Dimensions using Micrometers, Gage Pins Vernier Calipers, Drop Indicators, Comparators, Thread Gages and Various other Precision Tools. Records these Measurements as necessary on the Part Traveler. De-Burrs Parts to Customer Specifications and cleans the parts as necessary. Maintains a Clean Work Environment. Provide routine Maintenance on CNC Machining Centers. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Locations: Lancaster, PA Education and/or Experience: High School Diploma or GED. Trade School or Apprenticeship Program preferred or a minimum of 2 years' experience in a Metalworking CNC Environment. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate effectively to co-workers through Verbal and written communications as well as other employees of the organization. Ability to draft Work Instructions Using Microsoft Word. Mathematical Skills: Ability to calculate Machine Offsets using addition, subtraction, multiplication and division. A good understanding of Geometry and the ability to calculate angles. Ability to Calculate Feeds and Speeds as they relate to the Material being cut. Reasoning Ability: Ability to solve practical problems as well as Complex Fixturing problems. Ability to apply common sense when using equipment and making decisions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee frequently is required to stand, walk; and use hands to finger, handle, or feel. The employee is occasionally required to sit, the ability to stand for extended periods is required. The employee must occasionally lift and/or move up to 50 pounds and 70 pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually moderate. All Job Posting Locations (Location) Lancaster Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Machinist II is responsible for performing basic machine setups and operating fabrication machinery. ESSENTIAL FUNCTIONS OF THE JOB: Performs simple setups and operates a variety of machines, tools and other equipment (with major focus on lathes, mills, grinders, honing machines, drill presses, but may also include hydraulic or pneumatic presses, bench grinders, deburring and polishing tools, and manual operations) to produce parts per instructions, blueprints or other technical drawings . Properly maintains and performs minor routine maintenance to machines utilized. Evaluates parts or material by measuring with appropriate instruments and may perform simple testing to validate parts or material conforms to requirements. Documents information as required per the work instruction or as instructed and reports any discrepancies to the supervisor, lead, and/or engineer. Maintains a safe work environment and adheres to all safety procedures and protocols, including the use of personal protective equipment (PPE). Supports area organization and fosters a continuous improvement mindset. Adheres to the company's policies and promotes a healthy and positive work culture The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 3-5 years of recent working experience in CNC Lathe. Completion of a 2 year technical/trade school in machining (preferred). KNOWLEDGE/SKILLS/ABILITIES: Must be able to read engineering blueprints and planning. A positive attitude, excellent communication skills, strong multitasking ability, and an interest in learning new skills/technologies required. MUST be well organized, works well with others and flexible. Broad skill set who is not afraid to tackle multiple tasks. Knowledge of tooling speeds and feeds offsets and minor program changes. Ability to prove out programs. Setup, program, and operate two CNC Lathes (Okuma). Perform tool adjustment as required. Work with Engineering to make tooling. Able to use inspections tool to inspect parts. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be a U.S. Person which is defined as a U.S. citizen, a lawful permanent resident [“green card” holders], U.S. National, Refugee, or Asylee. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Salary Range: $22-26 hourly. Relocation assistance not available and we are only considering local candidates. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

Job DescriptionSalary: $22.00-$25.00 DOE Superior Thread Rolling Co.has been an industry leader in the Aerospace and Precision Machining business for over 70 years. We lead by developing "out-of-the-box" solutions to the constant changes in quality, administration, lean processes, and state-of-the-art technical systems required by Aerospace prime contractors and their supply chain. We strongly believe that the true reason behind our success is due to our loyal and dedicated team. POSITION SUMMARY: CNC Machine operator of numerical control machines or machining centers to perform various functions, such as cutting, drilling, milling, reaming, boring, and broaching of metallic and nonmetallic workpieces, utilizing knowledge of machine tool capabilities, machinability of materials, and shop math. Will learn to Offsets machines, when necessary, with help from supervisor. Our 2nd shift runs from 2:30 PM-11:00 PM.This position offers a $2.00 Shift differential on top of the pay. ESSENTIAL JOB FUNCTIONS: Offsets at machine to adjust tool into machining tolerances. Is able to Operate Machines with Minimal help from the sup[ervisor Reads and interprets blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, and machining methods and sequences. Must be able to identify problems and get supervisor to troubleshoot the possible fixes. Load parts per instructions, counts parts and sets machine controls to position spindle in relationship to work piece and coolant flow. Starts machine and monitors displays and machine operation to detect malfunctions. Stops machine to change cutting tools or to measure parts for conformance to blueprint specifications, using precision measuring instruments. May learn to enter commands to offset and adjusts machine controls to correct malfunctions or outoftolerance machining. Operates machine and can stop machine when tool or program malfunctions. Cleans machine, tooling, and parts. Performs machine maintenance as required. Communicates with coworkers and supervisor to receive instructions and coordinate activities. Inspects and measures parts to maintain statistical process control charts. JOB QUALIFICATION REQUIREMENTS: 3-5 years' experience and/or trade school. Experience operating CNC lathes and mills in an Aerospace Machine shop setting, reads and interprets blueprints. Must be able to use micrometers, calipers, and some inspection tools. Experience operating the following machines is desirable: Mori Seiki Duraturn 2550 Mori Seiki Duraverticle 5060 Mori Seiki NLX 3000 Mori Seiki SL4 Samsung SL40 Samsung SL2500SY Samsung SL2000 Haas VF-2 & VF-4 Fanuc Controls Company Benefits: Medical, Dental Vision Holidays, Vacation & Bonuses 401(k) with matching company funds (Full Time Employees). Superior Thread Rollingis a smoke-free and drug-free workplace. All prospective candidates are subject to a pre-employment drug test and background check. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. To conform to U.S. export control regulations, requirements of this position include being eligible to work with export-controlled products and related data without restriction. Keywords: CNC Machinist, Inspection, Aerospace, Manufacturing, CNC operator, CNC 2nd Shift Lathe, Mill, Fanuc Controls

Job DescriptionDescriptionAs a CNC Machinist at Impulse, you will be responsible for machining & manufacturing complex components for spacecraft & rocket engine hardware. This isn't just another job; it's an opportunity to be part of something epic. Each machined part you create plays a crucial role in our mission to push the boundaries of what's possible. If you're ready to go the extra mile, embrace challenges, and collaborate with a team of innovators, we want to hear from you. Join us in shaping the future; one meticulously crafted component at a time! NOTE: This is a 2nd shift position, which runs approximately from 1:30pm - 11:00pm Responsibilities Set up, operate, and program multi-axis CNC mills and lathes (up to 5-axis) to manufacture complex aerospace components Perform precision inspections using an array of metrology equipment to verify dimensions and ensure adherence to drawings and tolerances Read and interpret blueprints, CAD drawings, GD&T, and other technical documents to complete machining operations Manage cutting tools in CNC machines, ensuring optimal tool load and measurement for upcoming programs Troubleshoot and resolve operational issues, including alarm resolutions and tooling repairs, to maintain maximum machine uptime Operate CNC machines in a production environment, producing both development and flight hardware while meeting quick-turn program goals Conduct on-machine deburring and precision cleaning of components to ensure quality and reduce human intervention Maintain a clean and safe work environment, adhering to company guidelines and 5S principles Provide continuous feedback for process improvements and efficiency opportunities to engineering and leadership Actively participate in preventative maintenance of CNC machines on a weekly and monthly basis Communicate with shop leadership regarding production challenges and collaborate with teammates to support workflow Minimum Qualifications High school diploma or equivalency certificate 5+ years of experience in CNC machining, particularly with aerospace machine shops and hard metals Demonstrated proficiency in G-code, with strong setup and operational skills on CNC mills and lathes Ability to read and understand complex blueprints, GD&T, and tolerances Preferred Skills and Experience Experience with various materials such as Inconel, titanium, stainless steel, copper, and aluminum 3+ years of setup experience on vertical mills 1+ year of experience setting up and operating 5-axis mills Familiarity with CNC programming using software such as NX, Solidworks HSM, Mastercam, Fusion 360 or Esprit CAD/CAM Experience with multiple CNC control systems, including Heidenhain, Haas, Fanuc, Siemens, and others Strong mechanical aptitude and understanding of tooling technology and shop math Excellent interpersonal skills and the ability to contribute to a team-oriented environment. Additional Information: Must be available to work all shifts, including overtime and weekends as needed Ability to lift up to 35 lbs. unassisted and stand for extended periods (8 hours minimum) Ability to stoop, bend, crawl, and maneuver in tight spaces Comfort with repetitive movements and exposure to sounds and noise levels that may be distracting Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Your tasks * Perform complex CNC setups on all machines (CNC Swiss Turn/Lathe/Mill) and (Heidenhain/Fanuc/Haas Controller) * Create CNC programs using MasterCAM, Esprit, or Equiv. for various CNC machine types, including creating setup sheets * Able to fully train Level I & Level II, and new operators to run and setup CNC machines. * Design, program, and machine any work holding fixtures, make manual edits to G and M codes, trouble shoot code for issues Your profile * Certificate of completion in operation of machine shop equipment and measuring tools or recent two years' experience as a machine shop operator level 3. * Strong computer skills as CNC Operators use computer software to control machinery * Strong math skills for inputting specific dimensions and figures into the CNC machinery: GD&T (Geometrics, Dimensioning, and Tolerances). Benefits Clear vision and purpose "We are a sustainability and innovation leader providing superior customer value" is our vision and this is what guides us. Our purpose "becoming better every day - since 1802" is what inspires us in our daily work. Sustainability and innovation focus We have high sustainability and innovation goals. Let's work towards a sustainable future together. Excellent learning tools At GF we provide development opportunities for everyone. We offer global learning tools as well as trainings and specialized courses. Great career opportunities GF as a global acting company provides many opportunities regarding career growth. We also offer a dedicated talent management process (MyNextBigStep@GF) to boost your career. Health care GF offers a comprehensive health and welfare benefits plan including, medical, dental, vision, life insurance, short- and long-term disability, and 401k with generous company match. Paid holidays Paid time off include 12 paid days of company holidays. Work perks discount The discount program includes many different goods and services including appliances, electronics, theme parks, movies and more. Sport activities We support the purchase of a fitness membership from the center of your choice with a subsidy. Your contact Veronica Ortiz 47 Human Resources Generalist Web E-Mail 5462 No. Irwindale Avenue 91706 Irwindale, CA United States View larger map Your work route Apply now Who we are GF Piping Systems is the world's leading supplier of piping systems. We enable the safe and sustainable transport of fluids. Our business is driven by industry-leading sustainability levels, innovation through digital solutions and investment in a culture based on performance, learning and caring.

Job Description We are seeking a skilled CNC Machinist with experience in full set-ups and a solid understanding of G and M codes. The ideal candidate will be responsible for setting up, operating, and maintaining CNC machines to produce precision parts according to specifications. Key Responsibilities: Perform complete set-ups on CNC mills and/or lathes Read and interpret blueprints, drawings, and G/M code programs Make necessary adjustments to ensure parts meet tolerances Inspect and measure finished parts using precision tools Maintain clean, safe, and organized work area Qualifications: 3+ years of CNC machining experience Strong knowledge of G and M codes Ability to perform full machine set-ups independently Experience with inspection tools (calipers, micrometers, etc.) Attention to detail and commitment to quality

We are seeking an experienced 5 axis CNC Machinist, 2nd Shift for our South El Monte, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California and 1 location in Mukilteo, Washington. Location: South El Monte, CA Compensation & Benefits: Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement* RESPONSIBILITY & AUTHORITY: Maintain and Realize AS 9100 procedures and continuous improvement efforts. Maintain a clean and organized work environment. Keep the CNC clean and general maintenance up to date. Keep machine fixtures clean and stored properly. Work with Management to prioritize machine schedule. Work with programmers in order to minimize set-up and manufacture time. Order cutters and tooling as required to support manufacturing. Operate the CNC. Report to Management recommendations and / or concerns that will affect quality or time management. Must understand how customer products are impacted in the event of failure. Any other duties as required. KNOWLEDGE AND SKILL REQUIREMENTS: Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management. Must have experience with Siemens 840D and Fanuc 31i - B5 Controls. Must have excellent blueprint interpretation skills. Must have thorough understanding of machine set-ups, tooling, and cutters. Must have direct communication with internal customers. Must be trained of applicable changes & customer requirements. Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: High school graduate or equivalent work experience. Adequate years of operating CNC equipment determined by Karman. PHYSICAL REQUIREMENTS: Constant standing/walking/sitting for at least 8 hours. Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs. Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment. Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement. Prolonged periods of repetitive movement are required. Constant holding, grasping, turning, or otherwise working with the hand(s). Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: This position operates in a warehouse/shop/manufacturing environment. As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Long Wall Company was created in 2025 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us. What we look for Mission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want engineers who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership. We seek engineers who take full responsibility for delivering flight-ready work while recognizing that no one succeeds alone. The best engineers make their teammates better, knowing that complementary skills create force multiplication and drive mission success. DescriptionWe are looking for an experienced CNC programmer and machinist who is excited about manufacturing development and production parts for launch vehicles and defense systems. We seek team members who can think critically when programming and machining to improve hardware designs and manufacturing processes. This role will require specific skill sets with multi-axis Mill programming and machining. Programming will be completed using Mastercam and verified using Vericut. Parts to be machined on Haas Machining Centers. Must have the ability and eagerness to both program and machine components. This role will primarily focus on 5th Axis Milling work supporting both production and development hardware for various components specifically launch vehicle engine and space system hardware. In an S5 level role - you will be expected to take projects to completion with a high level of autonomy, mentor junior machinists and drive shop and process improvements We machine parts from both billet material and additively manufactured parts:· Aluminum· Steel· Stainless Steel· InconelTypes of Machines:· Haas UMC 750 & UMC 1000· Haas VM3· Haas Gantry MillResponsibilities: Use Mastercam to create new programs and review/edit existing CNC programs for production and development hardware As required, use Vericut to validate programs and maintain revision control on CNC programs Analyze piece parts for DFM to ensure that the parts are optimized for manufacturing and collaborate with engineering to recommend drawing changes as needed Take feedback from engineering and manufacturing teams to rapidly iterate on part processes and designs Set-up, prove out, and operate programs on 3 & 5-axis mills. Perform in-process and first article inspections Support and mentor junior programmers and machinists Work with support teams to ensure machine care and preventative maintenance activities are completed Design and machine custom tooling and fixturing Take an active role driving machine shop process improvements, ensuring shop cleanliness and organization is maintained to a high standard Submit purchase orders for tooling per job requirements and add tools to vendor managed inventory (VMI) list for standard components Support with material loading and handling Basic Qualifications: High School Diploma/GED or Equivalent Minimum 10+ years of CNC Mill programming and machining experience; including demonstratable expert working knowledge of Mastercam, superalloy machining, Haas CNC Machines and Controls - OR - Minimum 6+ years of CNC Mill programming and machining experience AND - Certification and/or provable expert working knowledge of Mastercam - Certification and/or provable expert working knowledge of Haas CNC Machines and Haas Controls - Expert in superalloy machining Availability to work a standard 10-hour shift schedule (50-hrs per week, overtime included). - Occasional weekends to support critical deadlines. Preferred Skills and Experience: Experience in interpreting GD&T and providing feedback to engineers in best practice for ease of machining and inspection.. Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists Proficient usage of a PC; experience with Microsoft Windows, Microsoft Office Suite (Excel, Outlook, Power Point, Word), shop floor management software (ERP) and related programs Strong written and verbal communication skills, excellent concentration with outstanding work efficiency and accuracy, great organizational skills, and a meticulous attention to detail Experience in aerospace, medical or automotive manufacturing. Strong knowledge of inspection tools and inspection processes Experience with Mastercam Blade Expert and impeller machining. Hands on experience with metal 3D printed components. Experience with Vericut verification software Experience with Microsoft Office products Familiarity with ISO9001 and AS9100D Additional Requirements: Ability to sit, stand, squat, and walk for extended periods of time. Ability to occasionally ascend/descend on ladders and/or work on rooftops. Ability lift 25lbs repeatedly and often throughout the day. Ability to communicate with individuals and groups in person, by phone and telepresence. Can work in Indoor manufacturing environment 70%, outdoors 30% Travel between our El Segundo (90%) and Port of Long Beach (10%) facilities as required. Occasional travel to our other instate and out-of-state sites may be required. ITAR RequirementThis position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity EmployerWe are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Radiant is an El Segundo, CA-based startup building the world's first mass-produced, portable nuclear microreactors. The company's first reactor, Kaleidos, is a 1-megawatt failsafe microreactor that can be transported anywhere power is needed and run for up to five years without the need to refuel. Portable nuclear power with rapid deploy capability can replace similar-sized diesel generators, and provide critical asset support for hospitals, data centers, remote sites, and military bases. Radiant's unique, practical approach to nuclear development utilizes modern software engineering to rapidly achieve safe, factory-built microreactors that leverage existing, well-qualified materials. Founded in 2020, Radiant is on track to test its first reactor next year at the Idaho National Laboratory, with initial customer deliveries beginning in 2028. Senior Engineering Technician Radiant is seeking an CNC Programmer and Machinist who will contribute to the development of our microreactor unit. you'll be a key contributor to Radiant, programming, setting up, and operating CNC machines to produce precision components that power our most critical systems. You'll translate engineering designs into high-quality, manufacturable parts ensuring accuracy, efficiency, and innovation at every step. This role requires hands-on experience with CNC machining, a deep understanding of G-code and CAM software, and a passion for solving complex manufacturing challenges. You'll work closely with engineers, machinists, and quality teams to push the limits of what's possible in precision manufacturing. Responsibilities and Duties: Develop and optimize CNC programs for 3-axis, 4-axis, and 5-axis mills, lathes, and multi-axis machining centers. Set up and operate CNC equipment to validate new programs and processes. Read and interpret complex engineering drawings, 3D models, and GD&T specifications. Collaborate with design and manufacturing engineers to improve part manufacturability and reduce cycle times. Select proper tooling, workholding, and cutting parameters for a variety of materials (aluminum, titanium, stainless steel, Inconel, etc.). Troubleshoot machining and programming issues on the floor to maintain high-quality output and machine uptime. Continuously improve machining processes through data-driven feedback and experimentation. Maintain adherence to safety and quality standards across all machining operations. Support additional technician duties or cross-functional shop activities as needed based to achieve company priorities. Required Skills and Qualifications: 5+ years of experience in CNC machining and programming in a precision manufacturing or aerospace environment. Proficiency in CAM software (e.g., Mastercam, Siemens NX, Fusion 360, or CATIA). Strong understanding of G-code, M-code, feeds, speeds, and toolpath strategies. Hands-on experience setting up and operating mills, lathes, and multi-axis machining centers. Ability to interpret complex technical drawings, GD&T, and 3D CAD models. Proven ability to take a part from print to finished component. Strong problem-solving skills and attention to detail. Desired Skills and Qualifications: Experience with 5-axis machining and post-processor development. Familiarity with aerospace or high-performance hardware manufacturing. Experience with exotic materials (e.g., titanium, Inconel, carbon composites). Working knowledge of ERP/MES systems and digital manufacturing workflows. Additional Requirements: Must be willing to work extended hours and weekends as necessary to achieve company goals. Must work 100% onsite at El Segundo HQ. Total Compensation and Benefits Radiant's new hire compensation package includes base salary, substantial equity grants, and comprehensive benefits. Total compensation and level are determined through a holistic evaluation of your interview performance, experience, education, and qualifications. Benefits and Perks for Eligible Employees: Stock: Substantial incentive stock plan for all full-time employees. Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. One Medical: Sponsored memberships for employees and their dependents. Vision: 100% top tier plan coverage + 50% for dependents. Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. Daily catered lunch. Free snacks and drinks. Flexible PTO policy. Remote workday allocation. Company and team-bonding events, happy hours and in-person camaraderie. Beautiful El Segundo headquarters close to the Pacific Ocean. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant's capacity to serve in compliance with U.S. export controls.