Numerical control operator jobs in Madison, IN

Job DescriptionDescription: Weld Machine Operator---- Responsible for running various welders and other machines efficiently, inspecting parts, and keeping work areas organized and clean. Adequately moves finished parts from work center using pallet jack to appropriate location. Effectively assists in setting up work centers following work instructions and company processes/procedures. Accurately performs and follows all general machine Total Preventive Maintenance (TPM) programs. Assists and provides effective and efficient training to other associates. Efficiently operate welders and other machines at or above the determined rate set by management. Proficiently sets up jobs and checks welders for proper settings (current, squeeze, hold, etc). Carefully inspects parts using calipers, micrometers, gages, force testers, etc., and records results in the appropriate system. Accurately recognizes visual defects on part. Fluent on Plex system keeping entries accurate and true (work center status). Adequately completes rate sheets and submits them in a timely manner. Thoroughly cleans work area by putting all items in appropriate locations. Successfully completes Pay for Skills and Training Within Industry (TWI) programs. Based on company needs a flexible work schedule and/or overtime is needed. ***Tools and Equipment Used: Pallet Jack Part Lifter Plex Calipers, micrometers, indicators, gages, force testers Plasma cutter Tool Boards **Work Ethic Responsibilities: **ETHICS: E**nthusiasm, * T eamwork, H onesty, I *ntegrity, * C *haracter and * S *elf-Motivated **Absenteeism/tardiness: ** Is conscientious in being at work when scheduled and on time. Perform the highest possible amount of quality work in the least or standard amount of time. Follow documented processes and procedures. **Quality: ** Do good quality work the first time, avoiding rework. Make good quality decisions as it relates to the job functions. Exhibit problem-solving skills. **Safety :** Be knowledgeable of and adhere to all safety rules and regulations. Always be conscious of the safety implications of one's actions; consistently observe safety regulations and wear the required safety equipment. Do not jeopardize one's own safety or others in any way. Wear appropriate personal protective equipment (PPE) in all designated areas assigned by the company. Immediately report all near misses, safety concerns, and accidents. Safely and efficiently use any assigned equipment. **Lean: ** Participate in and support lean manufacturing programs and principles with a focus to reduce costs with quality products such as Total Productive Maintenance (TPM), Suggestion System, etc. Actively participate in Continuous Improvement to continually strive to improve our processes and procedures. Adhere to 5S: Sort, Set in Order, Shine, Standardize, Sustain. **Environmental: ** Employee is responsible for complying and supporting any environmental policies and programs put in place by Batesville Tool & Die, Inc. (BTD). Employee may not bring any environmentally hazardous substances or compounds into BTD and is always conscious of the impact on the environment. Support and adhere to Technical Specification (TS) and International Organization for Standardization (ISO) activities and procedures. **Other: **Perform any other duties as assigned with enthusiasm and without complaint. ***Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is continually required to stand, sit, walk, use hands to fingers, handle or touch and run the work center while focused on the required task. The employee is frequently required to walk, sit, reach above shoulders, and talk and/or hear. The employee is occasionally required to reach above shoulders, stoop, kneel, crouch, or crawl. The employee will also be required to frequently lift up to 40 pounds and occasionally lift up to 60 pounds. Please note that these physical demands are based on a typical workday. Physical demands may vary based on the task assigned that day. ***Environmental Conditions While performing the duties of this job, the employee is occasionally exposed to wet, humid conditions and moving mechanical parts. These environmental conditions are based on a typical work day. Conditions may vary based on the task assigned that day. ***Protective clothing/equipment required: Safety glasses Sturdy leather shoe/boot or steel-toed tennis shoe Hearing Protection You should be proficient in: Machine Setups for Production Runs Mechanical Troubleshooting Skills Excellent Communication Skills Machines & technologies you'll use: Stamping Press (Minster, Aida) Requirements:

ESSENTIAL JOB FUNCTIONS Works under the close direction of senior personnel in the functional area Operate various types of CNC machines to produce parts conforming to print requirements, may include basic program adjustments to meet quality and schedule requirements Maintain a safe and healthy work environment by following standards and procedures Demonstrate an understanding of Geometric Dimensioning & Tolerancing and basic print reading Performs basic daily maintenance or checks for machines Will make more complex program or tooling adjustments to produce conforming parts Operate a 2 axis lathe and hold .0005 tolerances Operate a 4 th axis mill Perform First Part Inspections for all lathe and mill operations Mentor and assist colleagues in set ups or program adjustments Will make program or set up datasheet adjustments to master files for future use Other duties as necessary SKILLS and ABILITIES Computer skills (MS Office) and experience in ERP systems preferred Working knowledge of manufacturing principals, basic shop math, and basic blueprint reading Knowledge of hand tools and general inspection tools Ability to read and follow work orders, set up data sheets, and measurement instructions Ability to change some machine set ups (pallets, collets, etc.) Can perform diagnostics, repairs, and troubleshoot basic programming and machine issues Ability to change most machine set ups and update master programming and set up data sheets Willing and able to train colleagues with troubleshooting and adjusting machines and programs EDUCATION and EXPERIENCE Previous experience in production and quality control methods (ISO9001, AS9100 etc.) preferred. Previous experience in Lean Manufacturing implementation and production systems preferred. Previous experience in manual or CNC machining preferred. Possesses a moderate understanding of general aspects of the job. PHYSICAL REQUIREMENTS Must be able to stand, stoop and lift up to 40 lbs. MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Visit us at ************** for more information about MW Industries, Inc. and our affiliate companies.

Job Description TUBE MILL ENTRY LEVEL OPERATOR - 3rd Shift : Cleveland-Cliffs Tubular Components has an immediate opportunity for a Tube Mill Entry Level Operator at our Columbus, Indiana Tubular Components location. This position is responsible for monitoring, maintaining, and operating the off-loader section of the tube mill on the 3rd shift. This role is responsible for ensuring the tubing is offloaded into the appropriate rack or cart per the customer requirements. Summary of Responsibilities: · Hand stack, package or band steel tubing manually into appropriate carts or racks. · Visually perform quality checks. · Use measuring devices to measure tubing. · Technical skill set to perform changeovers and set up. · Ensure the highest level of safety, quality, and productivity are met. · Read and follow work instructions to produce tubing per customer specifications. · Other duties as assigned. Requirements Minimum Qualifications : High School Diploma or GED Must be able to lift up to 45 lbs. Regular 3rd shift schedule: Monday night through Friday morning - 8pm - 6am Must be able to work overtime as needed to support customer requirements. Ability to read and comprehend English written procedures. Excellent attendance record Excellent safety record Pre-Employment hair drug screen required. Preferred Qualifications: · Prior automotive manufacturing experience · Experience working in a production or manufacturing facility Applicants for this position must be currently legally authorized to work in the United States on a full-time basis. Benefits Competitive Pay Peer to Peer Training Incentive Employee Referral Incentive of $1,500 per successful referral Operational Performance Incentive Plan - Quarterly Incentive Opportunities Company provided 401K with company matching. Vacation Holidays Medical, Rx, Dental, Vision plans available effective date of hire. Company Provided Life and AD&D Insurance Excellent growth and advancement opportunities Cleveland-Cliffs Inc. is the largest flat-rolled steel company and the largest iron ore pellet producer in North America. The Company is vertically integrated from mined raw materials, direct reduced iron, and ferrous scrap to primary steelmaking and downstream finishing, stamping, tooling, and tubing. We offer an excellent total compensation package including top pay with variable compensation opportunity, health insurance, retirement plan, paid time off and more! Cleveland-Cliffs Inc. is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please send an e-mail to *************************** or call **************** and let us know the nature of your request and your contact information. Do not email your application materials to this email address. Application materials sent to this email address will not be considered. Cleveland-Cliffs Inc. is an equal opportunity employer - M/F/Veteran/Disability. We are a drug-free workplace and conduct pre-employment screening as a condition of employment.

We are seeking a 1st shift CNC Machinist with 3-5 years of experience. The ideal candidate will have experience with Haas Machining Centers and Fusion 360, with the ability to set up, program, and operate CNC machines while interpreting blueprints. **Responsibilities** + Set up, program, and operate CNC machines. + Read and interpret blueprints accurately. + Use inspection tools and measuring devices effectively. + Maintain close tolerances in machining processes. + Perform troubleshooting and changeovers as needed. **Essential Skills** + 3-5 years of CNC machining experience. + Proficiency with Haas Machining Centers. + Experience with Fusion 360. + Ability to read and interpret blueprints. + Skilled in using inspection tools and measuring devices. **Additional Skills & Qualifications** + Attention to detail. + Ability to work independently on machines. **Why Work Here?** Join a small, privately-owned business with strong leadership that offers opportunities for long-term growth. Enjoy a climate-controlled work environment with direct placement opportunities. **Work Environment** Work in an underground facility that is clean and equipped with very large CNC machines. The environment is climate-controlled, providing comfort throughout the workday. **Job Type & Location** This is a Permanent position based out of Shelbyville, Kentucky. **Job Type & Location** This is a Permanent position based out of Jeffersonville, IN. **Pay and Benefits** The pay range for this position is $50000.00 - $70000.00/yr. Direct Hire 401k health vision dental **Workplace Type** This is a fully onsite position in Jeffersonville,IN. **Application Deadline** This position is anticipated to close on Dec 16, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Make Tomorrow Better Than Today! As a CNC Machinist, you can join the winning team with a company that offers excellent opportunities to grow your career. Based on experience, we will offer $22.00-$34.00/Hr., along with a very competitive benefits package, including 401(k) with a match, that starts day one. We are located in a state of the art, climate-controlled building with employee cafeterias, and an on-site gym. Pay Range is $22-$34/Hr. (+ Shift Differential) 2nd Shift: 3pm - 11pm (M-F) 3rd Shift: 11pm - 7am (Su-Th) **$4000 Sign-on Bonus - Partial pay out at time of hire and remaining paid out throughout first year of employment.** Position Description: Precision Setup: Set up CNC machines or cells of machines according to instructions or established practices, ensuring the use of proper tools and setup sheets. Maintain Excellence: Make checks, adjust tools, and program parameters to maintain proper dimensions, coolant, and lubrication levels. Interpret and Execute: Read and interpret complex oral, written, and visual instructions for machine setup. Quality Assurance: Obtain first piece inspection for runs exceeding three pieces and approve setups based on measurements made at the cell. Report and Resolve: Report equipment malfunctions, material discrepancies, and unusual conditions to the supervisor. Continuous Learning: Complete all relevant training provided by Power Transmission Solutions. Safety and Cleanliness: Maintain a safe and clean work area, adhering to all safety procedures. Team Collaboration: Promote team concepts and train new employees. Compliance: Understand and adhere to all relevant ISO 9001 QOPs and API 671 guidelines. Adaptability: Perform any other related duties as directed. Special Skills: Instruction Interpretation: Ability to understand, interpret, and carry out job instructions. Mathematical Proficiency: Proficiency in arithmetic, decimals, and fractions. Interpret precision measurements and dimensional gaging. Technical Expertise: Experience with complex products, CNC machines, and programming. Ability to work with processes such as heat treatment, gear cutting, grinding, and complex turning and milling utilizing multiple machine axes. Physical Requirements: Strength and Mobility: Must be able to lift, move, and manipulate up to 35 lbs. Endurance: Must be able to stand and/or walk for long periods. This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position. Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a “U.S. Person”, which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States , or who otherwise can qualify for a license that permits them to hold the position. Benefits Medical, Dental, Vision and Prescription Drug Coverage Spending accounts (HSA, Health Care FSA and Dependent Care FSA) Paid Time Off and Holidays 401k Retirement Plan with Matching Employer Contributions Life and Accidental Death & Dismemberment (AD&D) Insurance Paid Leaves Tuition Assistance About Regal Rexnord Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com. Equal Employment Opportunity Statement Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you'd like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email ***************************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ***************************. Equal Employment Opportunity Posters Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

SummaryGE Vernova (NYSE: GEV) Addressing the climate crisis is an urgent global priority and we take our responsibility seriously. That is our singular mission at GE Vernova: continuing to electrify the world while simultaneously working to help decarbonize it. If we want our energy future to be different…we must be different. Our mission is embedded in our name. We retain our treasured legacy, “GE,” in our name as an enduring and hard-earned badge of quality and ingenuity. “Ver” / “verde” signal Earth's verdant and lush ecosystems. “Nova,” from the Latin “novus,” nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver. Together, we have The Energy to Change the World. Learn more at ***************** The Computerized Numerical Control (CNC) Machinist - VTL Operator you will work at the Erlanger, KY Service Center to service and manufacture large scale, power generation equipment along with their subassemblies by following blueprints and specific work instructions. This is an onsite position only available at our Erlanger, KY Service Center. The typical work schedule is Monday to Friday, with weekend work as optional. Available shift is 6:45AM to 3:15PM. Our Erlanger, KY Service Center is responsible for manufacturing/assembly and/or repairs of large utility grade Steam Turbines and Generators.Job Description Your Role Work in a shop environment safely with zero accidents and/or injuries Set-up and operate CNC Vertical Turret Lathes with Live Tooling Read CNC programs, familiar with G & M codes Make edits to CNC programs to maximize efficiency and reduce error Read and interpret Engineered Blue Print dwgs Understand and apply geometric tolerances Set up and safely use various inspection tools and gages (i.e. inner diameter (I/D) & outer diameter (O/D) Mics, calipers, Pi-tape, bore gages, Tri-mics, thread gages, etc...) Machine to required tolerances of .0005” - .005” Determine optimal machining feeds and speeds and tool selections Work effectively with team to ensure successful delivery to customer Basic Qualifications High School Diploma / GED Minimum 5 years CNC Machining Experience preferred Desired Characteristics Experience with VTL that uses live tooling is a plus. Ability to follow all safety rules and wear all PPE as required. Experience with Fanuc Controls is a plus. Proven ability to use shop math, including trigonometry and geometry. Ability to follow work rules, carry out instructions either written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Ability to work well with others. Ability to communicate clearly and effectively. Desire to take ownership and accountability in work and in company success. Ability to work in a lean and fast-paced environment. The pay range for this position is $29.00 to $40.00 USD per hour. The specific pay rate offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. *The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No For candidates applying to a U.S. based position only:*The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas.This posting is expected to remain open for at least seven days after it was posted on November 10, 2025.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date).GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Job Details North Vernon - North Vernon, IN Full Time High School $24.00 - $27.00 Hourly None 3rd Shift Skilled Labor - TradesCNC Machinist - Experienced Summary/Objective The primary role of a CNC Machinist is to create machine parts and tools using precision computer equipment. CNC (computer numerical control) Machinists set up, adjust and maintain all equipment used in their daily job activities. They are also responsible for creating programming instructions for the parts they are manufacturing. Once the parts or tools have been produced, CNC Machinists inspect the finished products to ensure they meet all specifications. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Machine blocks for plastic injection molds Set-up and indicate in work pieces Program using WorkNC software to operate 2D/3D CNC work centers and run CNC machines. Program with MasterCam for CNC lathe and Wire machines. Create, modify, and edit programs for the CNC mills using MasterCam and WorkNC using the most efficient method to ensure quality parts meet customer expectations. Use micrometers, calipers, and other appropriate measuring tools to verify accuracy Interpret blueprints, drawings, and specifications to determine dimensions and tolerance of finished work piece, the sequence of operations that will be used to machine the parts and the set-up requirements Troubleshoot errors on the machine Prioritize work and machines to maximize time Maintain programming files in proper order structure Understand and follow health, safety, security, and environmental practices Keep work area organized and clean Follow all company policies and procedures as applicable to position Competencies Communication Proficiency. Mathematical Skills. Teamwork. Attention to detail. Time Management. Supervisory Responsibility This position has no direct supervisory responsibilities. Work Environment This job operates in a manufacturing environment. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to stand and walk for full shift. Able to lift 50 lbs. Must be able to reach and stretch with arms and hands. Twisting and bending required. Specific vision abilities required by this position include close inspection identification of objects from a distance, color determination, peripheral detection, depth judgement, and the ability to identify details in varying conditions. Position Type and Expected Hours of Work Assigned work days are Monday thru Friday and scheduled hours are per scheduled shift. Weekends as needed. Travel No travel is expected for this position. Required Education 1. High School Diploma or Equivalent. Preferred Experience Minimum of 3 years' recent experience as a CNC Machinist. Programming experience minimum of 3 years UG experience a plus but not required Moderate computer skills. Ability to perform basic math Ability to interrupt customer specifications. Ability to use various gauges and fixtures. Good organizational and interpersonal skills. Ability to manage multiple jobs in a highly energized and fast paced environment within a framework of constantly shifting deadlines and deliverables. Requires minimal supervision. Self-motivated with the ability to organize, prioritize and control job responsibilities. Flexibility to adapt to change and willing to learn and develop new skill sets as applicable. Additional Eligibility Qualifications Pass drug screen AAP/EEO Statement Applicants to and employees of the company are protected under Federal Law from discrimination on the following bases: race, color, religion, sex, national origin, disability, age, sex (including pregnancy, gender identity, and sexual orientation), and genetics. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Responsible for maintaining wastewater treatment plant. ESSENTIAL DUTIES AND RESPONSIBILITIES: Maintain waste water treatment plant (Checks every 30 minutes) Coordinate, prepare and ensure accuracy of all compliance reporting as set forth in applicable regulations or Permits. Submit to the appropriate management representative for final review. Maintain daily operating logs. Develop standard operating procedures as necessary. Conduct research and develop correspondence as necessary. Coordinate the storage, and disposal of all waste oils, greases, solvents, and chemicals used or discarded by NDI. Report discrepancies to appropriate management representatives. Assist with proper identification of all waste streams. Assist waste haulers with documentation and loading of wastes. Assist with conducting environmental audits. Develop and conduct training programs for NDI personnel. Assist with all environmental compliance efforts. Assist with research and development of various environmental programs.

Senior CNC Programmer - Harrison, OH (Job ID: 1177). Cincinnati Incorporated has been manufacturing machinery since the late 1890's. We pride ourselves on a hard day's work and quality. Quality is not only seen in our products but also in our team members. CI employees have shaped the reputation and culture at CI with their uncompromising integrity, focus and innovation. The icing on top of the cake: CI offers a competitive and comprehensive benefit package. Are you ready for your career at CI? Position Summary & Purpose: We're looking for a dedicated, self-motivated employee with 7+ years of CNC Programming & Machining experience. The right candidate should be well versed in cutter technologies used in machining and turning and have a strong understanding of Fanuc M & G codes. You should be knowledgeable in a broad range of manufacturing processes from raw materials to finished parts. You will work closely with Machine Operators, Quality Control personnel, and Engineers to solve any issues from work holding, cutter application, surface finish to dimensional tolerances. Primary Responsibilities: Adaptively/Dynamically Program CNC Mills & Lathes for low volume short lead time (expedited, etc.) and high volume production work. Ex. A part we normally produce using CNC Milling Machine A, which uses a dedicated fixture and tooling is a bottle neck due to Machine A being down. We need you to review the part, figure out what alternative machine is best suited for a quick turnaround, and completely reprocess and program the part to run at that alternative machine so we have a finished part tomorrow. Understand, interpret, and edit Fanuc M & G codes. To reduce setup time and machining through process improvements. Use existing process routers utilizing new machining practices and methods. Work with Engineering departments to resolve any limitations on machining of parts and offer design suggestions to reduce costs and cycle time. Apply DFM (Design For Manufacturing) logic. Work with machine operators on first run programs to ensure quality of program and optimal cycle times. Provide leadership, coaching, and/or mentoring to peers. Willing and able to see an assignment through in a timely manner, recognizing the needs of others, production, and CINCINNATI's customers. Skills: Ability to read and interpret mechanical Engineering Drawings, including GD&T Tolerancing. Develops, edits, or modifies operation sequences based on manufacturing sketches, blueprints, or schematics. Both digital and board drawing formats. Use Solid Edge and Mastercam 2022 (or near version) software to program two axis lathes with live tooling, vertical and horizontal machining centers up to 3+2-axis. Thoroughly understands tool wear, cutter compensation, and under industry leading tooling technology. Helpful Experience: University Degree in Industrial Engineering, Mechanical Engineering, Manufacturing Technology, or equivalent. Mazatrol & MazaCAM programming and operation. Physical Demands and Work Environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical demands: This position is very active and requires frequent standing, bending, kneeling, stooping, crouching, crawling, and climbing of ladders. Must be able to use hands to finger, handle or feel objects, tools, or controls; must be able to lift a minimum of 50 lbs. frequently. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment can be loud occasionally. EOE including Disabilities/Vets This role does not offer sponsorship employment benefits and being authorized to work in the U.S. is a precondition of employment. You must be a U.S. Citizen, U.S. National, or recent lawful permanent resident to apply. Some More Amazing Benefits at Cincinnati Incorporated: ✓ Paid Vacations ✓ Paid Holiday and Personal Days ✓ Profit Sharing Program ✓ Medical Insurance (including HSA) ✓ Dental Insurance ✓ Vision Insurance ✓ Accident Insurance ✓ Life Insurance: AD&D ✓ Disability Insurance ✓ Generous 401K Employer Match ✓ Flexible Spending Account ✓ Tuition Reimbursement ✓ Employee Assistance Program ✓ Parental Leave

Job Description2nd Shift Tooling Room Technician Contract-To-Hire Reports to: Tool Room Supervisor (directly) / Tool Room Machinist (indirectly) Shift: 2nd Shift The Tooling Room Technician works closely with the Crew Supervisor and Manufacturing Specialists to prepare, maintain, and provide tooling that supports the production of high-quality products meeting customer specifications. This role ensures tooling readiness, supports efficient operations, and contributes to meeting or exceeding established productivity targets. Key Responsibilities: Operate Makino Milling Machines and other tool room equipment (Wheelabrator, manual mills, grinders) as trained. Prepare tooling, including breakdown, cleaning, and assembly for machining. Measure step heights on punches and log results in the tool room step list. Maintain punch cut records, compacting tool sign-out sheets, and dispense to oven documentation. Receive, inspect, and verify tooling from vendors as needed. Support tooling programming by assisting Tooling Specialists with writing tool path programs for Makino mills. Use computer systems to transfer CNC programs to Makino mills. Follow all safety guidelines and maintain a safe work environment. Assist with tooling inventory and organization. Perform and document daily and monthly operator preventive maintenance (PMs). Ensure tooling and dies are production-ready at all times. Support training initiatives as directed by Tooling Specialists. Perform other duties as assigned. Required Skills & Knowledge: CNC/machining background (minimum 2 years required). Ability to read and interpret blueprints (preferred). Proficiency in operating drill presses and sawing equipment. Familiarity with manual tool room equipment. Basic knowledge of machine safety and personal protective equipment (PPE). Understanding of lock-out/tag-out procedures. Material handling, including hazardous materials handling and storage. Ability to prepare details for CNC machining after heat treat (face forms). Experience with preventive maintenance on machine tools. Use of hand tools on contoured steel from CNC milling operations. Competencies: Awareness of ISO9001, IATF16949, and ISO14001 standards. Continuous improvement mindset. Ethical work practices. Strong housekeeping and organizational skills. Health and safety compliance. Risk-based thinking in daily operations. Customer-specific requirements awareness. Qualifications: High School Diploma or GED required. Minimum of 2 years CNC/machining experience. Blueprint reading preferred. Experience with drill presses and sawing equipment required.

Technician II-- CNC Machinist/Programmer Overall Summary of Job Motivated, self-starter with strong attention to detail and ability to prioritize and complete tasks. High level CNC / Manual machinist position responsible for all aspects of the machine cell or improvement activity. Individual will be required to operate, set-up and program/debug CNC Machinery. Essential Functions Performs operations on CNC machining centers and lathes and various other plant machinery and equipment. Individual will be responsible for working from blueprints and job descriptions. Individual must be fluent in G and M code and be able to work with various CAD/CAM programs such as Mastercam or Autodesk Inventor. Tool-Making experience is important in addition to the CNC set ups and programs. Maintains records and logs, as needed. Guidance and direction will come from experienced production Leads. Performs related duties as needed or assigned. Minimum Qualifications: Graduation from high school and Technical School with 3-5 years of experience minimum. Ability to work from sketches, drawings, and blueprints. Ability to follow oral and written instructions and to communicate effectively. Ability to work cooperatively with others. Excellent work history and attendance record. Pre-employment drug screen required.

We're seeking team members who enjoy machine operations and an industrial setting. Do you love working with your hands? We're hiring and excited to meet you! We are seeking team members to produce welded components for our customers using robotic welding and mig welding equipment and processes. What You'll Be Doing: Use robotic welding equipment and a mig welding process to complete repair-type welds on product as a final step. Team members will rotate between loading/unloading parts into robotic weld fixtures, mig welding critical points, and completing inspection and finishing steps. Essential Duties and Responsibilities include the following. Others as assigned. Performs the following processes: Fixture set-ups and operation, buffing, spot welding, operating special welding fixtures, mig welding, load jigs, packing, deburring, sorting and reworking parts. Set-up jigs and fixtures by making adjustments in fixture and equipment used in producing product. Operates equipment using efficient procedures to ensure meeting production standards uses the necessary measuring tools to ensure required quality standards are met. Keeps all required records and maintains a clean work area. Follows all verbal and written instructions pertaining to the operation of dies and equipment as well as any other jobs to which he/she may be assigned. Help other operators as needed. Performs all duties in a safe manner. Schedule:* 1st shift 6:00AM - 4:30PM Monday to Thursday 3rd shift 7:00PM - 5:30AM Monday to Thursday overnight. $1.50/hr. shift premium* Weekend Days 6:00AM - 6:00PM Friday to Sunday. $3.00/hr. shift premium* * this is a start up; hours is subject to change with notice. Pay Range: $20.50 - 23.25/hour Experienced welders who pass the mig welding test with us will be hired as Welders. Pay starts at $22.50/hr. and up. Those with no welding training will be provided paid training and then may test up into higher pay rate. Weld trainees start at $20.50/hr. Qualifications Ability to work open shift and overtime as needed Ability to lift up to 50 lbs. on a regular basis and experience with this Able to work in environment where welding (flash lighting) occurs. Preferred: High School diploma or general education degree (GED); Experience in manufacturing, including: MIG welding equipment, setting up/running welding equipment, some adjustments and programming experience, performing quality inspections on parts produced, blueprint reading Who We Are voestalpine Roll Forming Corporation, or RFC as we call it, supplies custom roll formed metal components into several industries including Aerospace, Construction, Material Handling, Off-Highway, Office Furniture, Solar and Transportation. In 2000, Roll Forming Corporation was acquired by globally leading technology group voestalpine AG and became part of the Metal Forming, Tubes and Sections division. Today, voestalpine Roll Forming Corporation has seven production facilities across three states with five facilities and headquarters located in Shelby County, Kentucky and one facility each in Pennsylvania and Indiana. What We Offer You Several great benefit plans, including multiple health insurance options, vision, dental, life, short-term and long-term disability coverage, health-saving accounts, or flexible spending account Weekly pay 401K or 401K Roth up to 6% Match Quarterly Profit-Sharing Bonus. Apprenticeship programs & tuition reimbursement opportunities Leadership training opportunities TogetherWeCare, a philanthropic volunteer program that allows employees to support their community while on company time Countdown to Zero, a global environmental impact initiative that strives to make our work environments more efficient and environmentally friendly voestalpine Roll Forming Corporation is an At Will employer. Employment will be at-will, which means that either the employee or the employer may terminate the employment relationship at any time, with or without prior notice, and with or without cause. Roll Forming Corporation is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications. Please contact us at ********************** if you require any alternate application form or accommodation during our hiring process due to disability.

Job DescriptionWe're seeking team members who enjoy machine operations and an industrial setting. Do you love working with your hands? We're hiring and excited to meet you! We are seeking team members to produce welded components for our customers using robotic welding and mig welding equipment and processes. What You'll Be Doing: Use robotic welding equipment and a mig welding process to complete repair-type welds on product as a final step. Team members will rotate between loading/unloading parts into robotic weld fixtures, mig welding critical points, and completing inspection and finishing steps. Essential Duties and Responsibilities include the following. Others as assigned. Performs the following processes: Fixture set-ups and operation, buffing, spot welding, operating special welding fixtures, mig welding, load jigs, packing, deburring, sorting and reworking parts. Set-up jigs and fixtures by making adjustments in fixture and equipment used in producing product. Operates equipment using efficient procedures to ensure meeting production standards uses the necessary measuring tools to ensure required quality standards are met. Keeps all required records and maintains a clean work area. Follows all verbal and written instructions pertaining to the operation of dies and equipment as well as any other jobs to which he/she may be assigned. Help other operators as needed. Performs all duties in a safe manner. Schedule:* 1st shift 6:00AM - 4:30PM Monday to Thursday 3rd shift 7:00PM - 5:30AM Monday to Thursday overnight. $1.50/hr. shift premium* Weekend Days 6:00AM - 6:00PM Friday to Sunday. $3.00/hr. shift premium* * this is a start up; hours is subject to change with notice. Pay Range: $20.50 - 23.25/hour Experienced welders who pass the mig welding test with us will be hired as Welders. Pay starts at $22.50/hr. and up. Those with no welding training will be provided paid training and then may test up into higher pay rate. Weld trainees start at $20.50/hr. Qualifications Ability to work open shift and overtime as needed Ability to lift up to 50 lbs. on a regular basis and experience with this Able to work in environment where welding (flash lighting) occurs. Preferred: High School diploma or general education degree (GED); Experience in manufacturing, including: MIG welding equipment, setting up/running welding equipment, some adjustments and programming experience, performing quality inspections on parts produced, blueprint reading Who We Are voestalpine Roll Forming Corporation, or RFC as we call it, supplies custom roll formed metal components into several industries including Aerospace, Construction, Material Handling, Off-Highway, Office Furniture, Solar and Transportation. In 2000, Roll Forming Corporation was acquired by globally leading technology group voestalpine AG and became part of the Metal Forming, Tubes and Sections division. Today, voestalpine Roll Forming Corporation has seven production facilities across three states with five facilities and headquarters located in Shelby County, Kentucky and one facility each in Pennsylvania and Indiana. What We Offer You Several great benefit plans, including multiple health insurance options, vision, dental, life, short-term and long-term disability coverage, health-saving accounts, or flexible spending account Weekly pay 401K or 401K Roth up to 6% Match Quarterly Profit-Sharing Bonus. Apprenticeship programs & tuition reimbursement opportunities Leadership training opportunities TogetherWeCare, a philanthropic volunteer program that allows employees to support their community while on company time Countdown to Zero, a global environmental impact initiative that strives to make our work environments more efficient and environmentally friendly voestalpine Roll Forming Corporation is an At Will employer. Employment will be at-will, which means that either the employee or the employer may terminate the employment relationship at any time, with or without prior notice, and with or without cause. Roll Forming Corporation is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications. Please contact us at ********************** if you require any alternate application form or accommodation during our hiring process due to disability.

Omni Technologies, Inc. is a leading design and manufacturing firm that supplies custom urethane parts to OEMs. Our parts are used in various packaging, processing, and industrial applications. Omni cultivates long-term partnerships with clients, provides engineering and material selection support, offers solutions that help clients differentiate from the competition, and creates and executes innovative designs. We value integrity, humility, and ownership. Our vision is to create an enduring organization that improves the lives of everyone we touch. Omni Technologies is looking for a Machinist II to machine metal and plastic parts to correct tolerances. If you enjoy doing technically challenging work in a team environment and want to grow in your career, this job is a great opportunity. Essential job duties: Use a manufacturing drawing to generate a manufacturing plan to meet standards; i.e. select appropriate machine, tools, fixtures, and raw materials Adjust manufacturing plans, as needed, to achieve appropriate output and quality Set up, operate, and maintain CNC machines, VMCs, 3-axis milling machines, and lathes Program CNC equipment Machine steel, aluminum, and plastic Maintain tolerances in the range of +/- 0.002” Troubleshoot tooling issues and develop process improvements Work with a sense of urgency and manage workload Promote a culture of teamwork Maintain a clean and orderly work area Perform other tasks as assigned by supervisor Key accountabilities and duties performed by percentage (approx.): 1. Manual & CNC mill ops. - 50% 2. Manual Lathe - 15% 3. CNC Machine Set-up (Production) - 10% 4. Misc. collaboration - 10% 5. Mold repair - 10% Machinist Job Responsibilities: ~ Safely operate and maintain manual lathe and milling machines. ~ Reviews drawings, instructions, blueprints or samples to ensure accurate production. ~ Take precise measurements for cutting or shaping. ~ Selects appropriate machine and settings for a given task. ~ Plans proper sequence of tasks to complete the assignment. ~ Monitors production, adjusting feed and other settings as necessary. ~ Checks output for quality assurance and documents or discards defects. ~ Maintains a safe and clean workstation. ~ Contributes to team effort by accomplishing related tasks as needed. ~ Safely achieve OTD for production parts, multi-task and adjust priorities due to manager's request. Requirements: High School degree or GED Machining apprentice or at least 2 years of equivalent work experience Ability to read blueprints Mathematical ability Attention to detail Organization skills Teamwork Ability to lift up to 50 lbs. regularly Robotics experience not required but a plus Do you marvel at quality workmanship? Are you passionate about getting things done right? Are you analytical, mathematically minded, and a troubleshooter? Do you enjoy working with blueprints, models, and precision tools? Are you curious? Are you ready to join a strong team committed to consistent quality and continuous improvement to meet our clients' high standards? Apply today and be part of our future! Benefits Competitive pay Paid time off Vacation Medical Dental Vision Life insurance Additional voluntary benefits 401(k) with company match Profit sharing potential Tuition reimbursement for job-related education

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your Role at Baxter This is where my hands make life-sustaining products You are driven by the knowledge that the products you help make saves and sustain lives. You can move quickly, address questions, and encourage teammates, all while getting quality products out on time. You are calm, positive, and a key part of a fast-paced environment that emphasizes camaraderie and teamwork. As a machinist, you are happiest when you are moving, and we will not disappoint! Your team Delivering life-saving products is about getting them right, and attention to detail is how we make sure we meet that challenge. We are a team that supports each other throughout each shift. Working together in a supportive and open culture makes our processes evolve for the better and engages our workforce. You'll be offered extensive training, and the tight-knit working environment within the Manufacturing team means employees get additional training from their direct manager and peers when needed. What You'll Be Doing Mount, position and adjust various cutting tools, adapters, collets, pushers, cams, threading devices and other tooling as needed to make a quality part as determined by drawing specifications and set-up guidelines. Ability to set the proper feeds and speeds to ensure that a quality part is produced consistently. May be responsible for programming CNC machinery, must be capable of designing and formulating programs which will produce a part in blueprint specifications. Ability to create and troubleshoot programs, and make any necessary adjustments to programs or machine settings to produce parts. Assist supervisor as needed to ensure that schedules are met. Assist other team members in their duties to ensure a quality product and smooth flow. Train, instruct, and assist other operators as required. Move stock and material. Operate machinery as specified. What You'll Bring Must pass Machine Set-Up Test May be required to have tow motor license High School Diploma or (GED) General Education Degree (applies to anyone hired after 1997) We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all our employees, and we strive to be more transparent with our pay practices. To that end, this position has a pay rate of $23.04 an hour. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

Weld Machine Operator---- Responsible for running various welders and other machines efficiently, inspecting parts, and keeping work areas organized and clean. Adequately moves finished parts from work center using pallet jack to appropriate location. Effectively assists in setting up work centers following work instructions and company processes/procedures. Accurately performs and follows all general machine Total Preventive Maintenance (TPM) programs. Assists and provides effective and efficient training to other associates. Efficiently operate welders and other machines at or above the determined rate set by management. Proficiently sets up jobs and checks welders for proper settings (current, squeeze, hold, etc). Carefully inspects parts using calipers, micrometers, gages, force testers, etc., and records results in the appropriate system. Accurately recognizes visual defects on part. Fluent on Plex system keeping entries accurate and true (work center status). Adequately completes rate sheets and submits them in a timely manner. Thoroughly cleans work area by putting all items in appropriate locations. Successfully completes Pay for Skills and Training Within Industry (TWI) programs. Based on company needs a flexible work schedule and/or overtime is needed. ***Tools and Equipment Used: Pallet Jack Part Lifter Plex Calipers, micrometers, indicators, gages, force testers Plasma cutter Tool Boards **Work Ethic Responsibilities: **ETHICS: E**nthusiasm, * T eamwork, H onesty, I *ntegrity, * C *haracter and * S *elf-Motivated **Absenteeism/tardiness: ** Is conscientious in being at work when scheduled and on time. Perform the highest possible amount of quality work in the least or standard amount of time. Follow documented processes and procedures. **Quality: ** Do good quality work the first time, avoiding rework. Make good quality decisions as it relates to the job functions. Exhibit problem-solving skills. **Safety :** Be knowledgeable of and adhere to all safety rules and regulations. Always be conscious of the safety implications of one's actions; consistently observe safety regulations and wear the required safety equipment. Do not jeopardize one's own safety or others in any way. Wear appropriate personal protective equipment (PPE) in all designated areas assigned by the company. Immediately report all near misses, safety concerns, and accidents. Safely and efficiently use any assigned equipment. **Lean: ** Participate in and support lean manufacturing programs and principles with a focus to reduce costs with quality products such as Total Productive Maintenance (TPM), Suggestion System, etc. Actively participate in Continuous Improvement to continually strive to improve our processes and procedures. Adhere to 5S: Sort, Set in Order, Shine, Standardize, Sustain. **Environmental: ** Employee is responsible for complying and supporting any environmental policies and programs put in place by Batesville Tool & Die, Inc. (BTD). Employee may not bring any environmentally hazardous substances or compounds into BTD and is always conscious of the impact on the environment. Support and adhere to Technical Specification (TS) and International Organization for Standardization (ISO) activities and procedures. **Other: **Perform any other duties as assigned with enthusiasm and without complaint. ***Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is continually required to stand, sit, walk, use hands to fingers, handle or touch and run the work center while focused on the required task. The employee is frequently required to walk, sit, reach above shoulders, and talk and/or hear. The employee is occasionally required to reach above shoulders, stoop, kneel, crouch, or crawl. The employee will also be required to frequently lift up to 40 pounds and occasionally lift up to 60 pounds. Please note that these physical demands are based on a typical workday. Physical demands may vary based on the task assigned that day. ***Environmental Conditions While performing the duties of this job, the employee is occasionally exposed to wet, humid conditions and moving mechanical parts. These environmental conditions are based on a typical work day. Conditions may vary based on the task assigned that day. ***Protective clothing/equipment required: Safety glasses Sturdy leather shoe/boot or steel-toed tennis shoe Hearing Protection You should be proficient in: Machine Setups for Production Runs Mechanical Troubleshooting Skills Excellent Communication Skills Machines & technologies you'll use: Stamping Press (Minster, Aida)

TUBE MILL ENTRY LEVEL OPERATOR - 3rd Shift : Cleveland-Cliffs Tubular Components has an immediate opportunity for a Tube Mill Entry Level Operator at our Columbus, Indiana Tubular Components location. This position is responsible for monitoring, maintaining, and operating the off-loader section of the tube mill on the 3rd shift. This role is responsible for ensuring the tubing is offloaded into the appropriate rack or cart per the customer requirements. Summary of Responsibilities: · Hand stack, package or band steel tubing manually into appropriate carts or racks. · Visually perform quality checks. · Use measuring devices to measure tubing. · Technical skill set to perform changeovers and set up. · Ensure the highest level of safety, quality, and productivity are met. · Read and follow work instructions to produce tubing per customer specifications. · Other duties as assigned. Requirements Minimum Qualifications : High School Diploma or GED Must be able to lift up to 45 lbs. Regular 3rd shift schedule: Monday night through Friday morning - 8pm - 6am Must be able to work overtime as needed to support customer requirements. Ability to read and comprehend English written procedures. Excellent attendance record Excellent safety record Pre-Employment hair drug screen required. Preferred Qualifications: · Prior automotive manufacturing experience · Experience working in a production or manufacturing facility Applicants for this position must be currently legally authorized to work in the United States on a full-time basis. Benefits Competitive Pay Peer to Peer Training Incentive Employee Referral Incentive of $1,500 per successful referral Operational Performance Incentive Plan - Quarterly Incentive Opportunities Company provided 401K with company matching. Vacation Holidays Medical, Rx, Dental, Vision plans available effective date of hire. Company Provided Life and AD&D Insurance Excellent growth and advancement opportunities Cleveland-Cliffs Inc. is the largest flat-rolled steel company and the largest iron ore pellet producer in North America. The Company is vertically integrated from mined raw materials, direct reduced iron, and ferrous scrap to primary steelmaking and downstream finishing, stamping, tooling, and tubing. We offer an excellent total compensation package including top pay with variable compensation opportunity, health insurance, retirement plan, paid time off and more! Cleveland-Cliffs Inc. is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please send an e-mail to *************************** or call **************** and let us know the nature of your request and your contact information. Do not email your application materials to this email address. Application materials sent to this email address will not be considered. Cleveland-Cliffs Inc. is an equal opportunity employer - M/F/Veteran/Disability. We are a drug-free workplace and conduct pre-employment screening as a condition of employment.

Job Details North Vernon - North Vernon, IN Full Time High School $23.00 - $26.00 Hourly None 2nd Shift Skilled Labor - TradesDescription Summary/Objective The primary role of a CNC Machinist is to create machine parts and tools using precision computer equipment. CNC (computer numerical control) Machinists set up, adjust and maintain all equipment used in their daily job activities. They are also responsible for creating programming instructions for the parts they are manufacturing. Once the parts or tools have been produced, CNC Machinists inspect the finished products to ensure they meet all specifications. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Machine blocks for plastic injection molds Set-up and indicate in work pieces Program using WorkNC software to operate 2D/3D CNC work centers and run CNC machines. Program with MasterCam for CNC lathe and Wire machines. Create, modify, and edit programs for the CNC mills using MasterCam and WorkNC using the most efficient method to ensure quality parts meet customer expectations. Use micrometers, calipers, and other appropriate measuring tools to verify accuracy Interpret blueprints, drawings, and specifications to determine dimensions and tolerance of finished work piece, the sequence of operations that will be used to machine the parts and the set-up requirements Troubleshoot errors on the machine Prioritize work and machines to maximize time Maintain programming files in proper order structure Understand and follow health, safety, security, and environmental practices Keep work area organized and clean Follow all company policies and procedures as applicable to position Competencies Communication Proficiency. Mathematical Skills. Teamwork. Attention to detail. Time Management. Supervisory Responsibility This position has no direct supervisory responsibilities. Work Environment This job operates in a manufacturing environment. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to stand and walk for full shift. Able to lift 50 lbs. Must be able to reach and stretch with arms and hands. Twisting and bending required. Specific vision abilities required by this position include close inspection identification of objects from a distance, color determination, peripheral detection, depth judgement, and the ability to identify details in varying conditions. Position Type and Expected Hours of Work Assigned work days are Monday thru Friday and scheduled hours are per scheduled shift. Weekends as needed. Travel No travel is expected for this position. Required Education 1. High School Diploma or Equivalent. Preferred Experience Minimum of 3 years' recent experience as a CNC Machinist. Programming experience minimum of 3 years UG experience a plus but not required Moderate computer skills. Ability to perform basic math Ability to interrupt customer specifications. Ability to use various gauges and fixtures. Good organizational and interpersonal skills. Ability to manage multiple jobs in a highly energized and fast paced environment within a framework of constantly shifting deadlines and deliverables. Requires minimal supervision. Self-motivated with the ability to organize, prioritize and control job responsibilities. Flexibility to adapt to change and willing to learn and develop new skill sets as applicable. Additional Eligibility Qualifications Pass drug screen AAP/EEO Statement Applicants to and employees of the company are protected under Federal Law from discrimination on the following bases: race, color, religion, sex, national origin, disability, age, sex (including pregnancy, gender identity, and sexual orientation), and genetics. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Omni Technologies, Inc. is a leading design and manufacturing firm that supplies custom urethane parts to OEMs. Our parts are used in various packaging, processing, and industrial applications. Omni cultivates long-term partnerships with clients, provides engineering and material selection support, offers solutions that help clients differentiate from the competition, and creates and executes innovative designs. We value integrity, humility, and ownership. Our vision is to create an enduring organization that improves the lives of everyone we touch. Omni Technologies is looking for a Machinist II to machine metal and plastic parts to correct tolerances. If you enjoy doing technically challenging work in a team environment and want to grow in your career, this job is a great opportunity. Essential job duties: Use a manufacturing drawing to generate a manufacturing plan to meet standards; i.e. select appropriate machine, tools, fixtures, and raw materials Adjust manufacturing plans, as needed, to achieve appropriate output and quality Set up, operate, and maintain CNC machines, VMCs, 3-axis milling machines, and lathes Program CNC equipment Machine steel, aluminum, and plastic Maintain tolerances in the range of +/- 0.002” Troubleshoot tooling issues and develop process improvements Work with a sense of urgency and manage workload Promote a culture of teamwork Maintain a clean and orderly work area Perform other tasks as assigned by supervisor Key accountabilities and duties performed by percentage (approx.): 1. Manual & CNC mill ops. - 50% 2. Manual Lathe - 15% 3. CNC Machine Set-up (Production) - 10% 4. Misc. collaboration - 10% 5. Mold repair - 10% Machinist Job Responsibilities: ~ Safely operate and maintain manual lathe and milling machines. ~ Reviews drawings, instructions, blueprints or samples to ensure accurate production. ~ Take precise measurements for cutting or shaping. ~ Selects appropriate machine and settings for a given task. ~ Plans proper sequence of tasks to complete the assignment. ~ Monitors production, adjusting feed and other settings as necessary. ~ Checks output for quality assurance and documents or discards defects. ~ Maintains a safe and clean workstation. ~ Contributes to team effort by accomplishing related tasks as needed. ~ Safely achieve OTD for production parts, multi-task and adjust priorities due to manager's request. Requirements: High School degree or GED Machining apprentice or at least 2 years of equivalent work experience Ability to read blueprints Mathematical ability Attention to detail Organization skills Teamwork Ability to lift up to 50 lbs. regularly Robotics experience not required but a plus Do you marvel at quality workmanship? Are you passionate about getting things done right? Are you analytical, mathematically minded, and a troubleshooter? Do you enjoy working with blueprints, models, and precision tools? Are you curious? Are you ready to join a strong team committed to consistent quality and continuous improvement to meet our clients' high standards? Apply today and be part of our future! Benefits Competitive pay Paid time off Vacation Medical Dental Vision Life insurance Additional voluntary benefits 401(k) with company match Profit sharing potential Tuition reimbursement for job-related education