Numerical control operator jobs in Shaker Heights, OH

Job Description The Sanding and Robot Operator - 3rd Shift position sets up, operates and maintains multiple robotic sanding cells as trained and instructed to meet or exceed defined production targets. ESSENTIAL DUTIES AND RESPONSIBILITIES (other duties as assigned) Operates multiple robotic sanding cells with the loading and unloading of helmets to maximize robot time sanding while also ensuring quality. Identify helmet models to be sanded and correctly set the machine fixturing to ensure quality sanding. Load and unload helmets from the fixturing proplerly. Organize and maintain the machine fixturing so that they can be easily found as needed. Operate the computer controls of each cell to select the proper program for the paint color being sanded. Load the robot sanding tool as needed with the proper sand paper grit per the program running. Change the interface pads and backup pads on each cell running as needed to maintain quality sanding. Identify and communicate issues quickly to the GrayMatter Team using the Hot Line and the Team Viewer communication tool. Communicate issues immediately to Team Leader and Supervisor. Observes all safety rules and regulations. Exercises care and good judgment at all times to prevent accidents and injuries. Adheres to all company policies, procedures, rules, and BRG Code of Conduct. Practices good housekeeping by keeping work cells clean and organized. Performs other duties and tasks as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to satisfactorily perform each essential duty and responsibility listed above. The job requirements and physical demands listed below are representative of the required knowledge, skill, and/or ability to perform the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities. JOB REQUIREMENTS Authorized to work in the U.S. SKILLS Ability to perform simple mathematical calculations. Ability to effectively relate with others and cooperate as a team member. Ability to perform essential functions and responsibilities of the job with some supervision. Must be flexible. Careful attention to detail. Ability to communicate effectively in one-on-one and small group situations within the organization as well as to GrayMatter Robotics using the HotLine and Team Viewer app. Ability to rely on judgment for personal safety regarding work. Ability to write simple correspondence to communicate issues between shifts. PHYSICAL DEMANDS Must be able to lift and/or move up to 50 pounds at a time. Sufficient hand, eye, arm, and finger dexterity to load and unload the robotic sanding fixtures. Must wear safety glasses and hearing protection in designated areas. Prolonged periods of standing and/or walking while also performing repetitive tasks. Prolonged periods of bending/twisting throughout a work shift.

Full-time Description Mach3 Machine, located in Cuyahoga Falls, OH, a 100% employee-owned organization, specializes in large fabrication and precision machining. We offer great benefits, a supportive team environment, and the opportunity to build a fulfilling career in a culture-driven company. #ZV Position Summary: We are seeking a skilled CNC Machinist to machine parts with precision and efficiency. This role involves selecting appropriate sequences of operations, executing optimal setups, and ensuring all parts meet blueprint dimensions and tolerances. KEY JOB RESPONSIBILITIES: Machine Operations: Set up and operate a Horizontal Boring mill or lathe machines to produce precision parts and components (Fanuc-controlled CNC HBM). Maintenance: Perform daily start-up, clean-up, and routine preventative maintenance on equipment. Measurement Tools: Regularly use manual tools, including dial calipers, dial indicators, and OD/ID micrometers, to verify dimensions. Material Handling: Identify and label materials for fabrication or further machining. Blueprint reading: Interpret and work from engineering drawings, blueprints, and technical specifications. Physical: Load and unload raw materials and finished workpieces in and out of the CNC machine. Flexibility: Operate additional machines as needed to meet production demand. Requirements Experience: 3-5 years of machining experience required. Machine operation: Ability to set up and operate machines according to job specifications and production requirements. Technical Skills: G& M code programming knowledge is a plus (training available). Work Ethic: Must demonstrate an employee-owner mindset, with strong decision-making and accountability. Additional Skills: Forklift or overhead crane experience preferred, and familiarity with alloy steel machining required. Blueprint Proficiency: Ability to read and interpret blueprints and BOMs. Detail-Oriented: High accuracy, attention to detail, and a commitment to workplace safety. Core Values: Do Right - Always! Customer-Centric Teamwork Get it Done! - Well and Timely Drama-Free Work Environment Be Smart, Grow & Learn, Stay Smart Physical Requirements: Ability to stand for extended periods and occasionally lift up to 50 pounds. Physical activities include pushing, pulling, bending, stooping, and reaching as necessary. Steel-toe boots and safety glasses are required. Perks and Benefits: We offer competitive salaries, plus a competitive benefits package, which includes: Retirement Plan 100% company-funded (ESOP) 401(k) with match Health Insurance - choice of plans depending on your needs Dental Vision 6 Paid Holidays $2 shift differential for 2nd shift Quarterly bonuses PTO (Please note our two shutdown periods, where employees utilize PTO or may opt for voluntary work opportunities if available) Referral program Tuition Reimbursement Why Join Us? At Mach3, your work matters, and so does your voice. As an employee-owner, you'll be part of a team that values hard work, innovation, and integrity. Apply today and join a team where your skills and contributions are recognized and rewarded! Salary Description $20-$45/hr based on experience

Mach3 Machine, located in Cuyahoga Falls, OH, a 100% employee-owned organization, specializes in large fabrication and precision machining. We offer great benefits, a supportive team environment, and the opportunity to build a fulfilling career in a culture-driven company.#ZR Position Summary: We are seeking a skilled CNC Mill Machinist to machine parts with precision and efficiency. This role involves selecting appropriate sequences of operations, executing optimal setups, and ensuring all parts meet blueprint dimensions and tolerances. KEY JOB RESPONSIBILITIES: Machine Operations: Set up and operate a Horizontal Boring mill or lathe machines to produce precision parts and components (Fanuc-controlled CNC HBM). Maintenance: Perform daily start-up, clean-up, and routine preventative maintenance on equipment. Measurement Tools: Regularly use manual tools, including dial calipers, dial indicators, and OD/ID micrometers, to verify dimensions. Material Handling: Identify and label materials for fabrication or further machining. Blueprint reading: Interpret and work from engineering drawings, blueprints, and technical specifications. Physical: Load and unload raw materials and finished workpieces in and out of the CNC machine. Flexibility: Operate additional machines as needed to meet production demand. Requirements Experience: 3-5 years of machining experience required. Machine operation: Ability to set up and operate machines according to job specifications and production requirements. Technical Skills: G& M code programming knowledge is a plus (training available). Work Ethic: Must demonstrate an employee-owner mindset, with strong decision-making and accountability. Additional Skills: Forklift or overhead crane experience preferred, and familiarity with alloy steel machining required. Blueprint Proficiency: Ability to read and interpret blueprints and BOMs. Detail-Oriented: High accuracy, attention to detail, and a commitment to workplace safety. Core Values: Do Right - Always! Customer-Centric Teamwork Get it Done! - Well and Timely Drama-Free Work Environment Be Smart, Grow & Learn, Stay Smart Physical Requirements: Ability to stand for extended periods and occasionally lift up to 50 pounds. Physical activities include pushing, pulling, bending, stooping, and reaching as necessary. Steel-toe boots and safety glasses are required. Perks and Benefits: We offer competitive salaries, plus a competitive benefits package, which includes: Retirement Plan 100% company-funded (ESOP) 401(k) with match Health Insurance - choice of plans depending on your needs Dental Vision 6 Paid Holidays $2 shift differential for 2nd shift Quarterly bonuses PTO (Please note our two shutdown periods, where employees utilize PTO or may opt for voluntary work opportunities if available) Referral program Tuition Reimbursement Why Join Us? At Mach3, your work matters, and so does your voice. As an employee-owner, you'll be part of a team that values hard work, innovation, and integrity. Apply today and join a team where your skills and contributions are recognized and rewarded! Salary Description $20-$45/hr based on experience

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Description: Summary : Responsible for running lathe machines. This involves tasks related to set-up, machine operation, and disposing of chips as required. Tools and Equipment: lathes, variety of cutters and hand tools, chip pushers, steady rests, cranes, shovels, scale, tape measure, and brooms. This list is not all inclusive. Job Functions and Functional Job Task Elements Task 1: Lathe Operation Responsible for turning necks, facing, centering, etc -finishing lathe-smaller finer cuts-customer centers, etc. An overhead crane is used on these machines to set rolls and take out chip boxes. The employee can hook up the chain for the chip box, by squatting to the level of the chain and not having to lift it to place it on the crane hook. Finishing Lathe- the employee needs to make an average of 4 tools changes per shift on this machine. Based on the design of the machine, the tool change is made between knee and waist level, and some have easier leverage than others. They weigh between 10-40#s and are handled on an infrequent basis per hour. Once set-up is completed, the employee runs the machine using automatic controls between waist and chest level with minimal coordination of bilateral hands. When the machine is running, the employee is only required to supervise the operation and dislodge chips on an occasional to frequent basis per hour. Chips are pushed by climbing on 2 steps and using a chip pusher to dislodge the chips while using a partial squatting motion in the standing position. Chips can also be pushed from a vertical position at ground level and this mostly involves using bilateral arms. Some lathes do not have hydraulics to move the rolls on the machine. The rolls have to be locked or unlocked from their location by using a variety of cranks, wrenches, etc. This involves increased use of bilateral upper extremities with twisting of the trunk. Need to be able to push and pull with at least 50#s of force to use the tools. To apply drivers to roll may be required to lift up to 90# waist level to neck of roll several times each month. Rough Lathe-needs to be able to lift a 50# tool without a jib crane and place it at 28 inches off the floor from the left side and make sure it fits in the slot for the tool. There is only a space of 2 feet on the side of the insert, so that the employee would not be able to stand in front of it and perform this task. Also need to be able to handle a chip pusher that is 10 feet and 8 inches long and weighs 15# on an occasional to frequent basis per hour. Need to be able to push chips that are approximately 12 feet away. Dual Compound -the cutters on this machine need to be mounted twice the number of times as a regular lathe as they cut from both ends. The parts are mounted sideways from the right and the left. On one side the part is mounted 25 inches off the floor from approximately 2 feet away and from 6 inches away on the other side. Do not need to use a chip pusher on this machine as they move into the underground bin by themselves, but the employee needs to be able to use a broom to knock them down with minimal force on an infrequent to occasional basis per hour. Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned. If you meet the requirements above and are interested in joining our team, please apply with your updated resume. We look forward to reviewing your application! Requirements: Shift: 8 hours regular shifts and 12 hours over-time shifts. Breaks: 30 minute lunch. . Flooring: Cement, wooden platforms, grates, rubber mats. Environment: Machine shop environment. Need to be careful with other employees while moving overhead cranes in the vicinity. Safety Equipment: Hard hat, gloves, safety glasses, and steel-toe shoes. Strength Range: Medium-Heavy strength range.

Established in 1964, Custom Materials, Inc. is a proven source for the custom fabrication of electrical insulation and components. We personally serve major manufacturers and suppliers of electrical power generation equipment, distribution equipment, and controls. Components range from the insulation used in transformers, motors and motor controls to precision parts for the aerospace, military, medical, renewable energy, and other demanding industries. Companies appreciate our ability to deliver metal fabrications, plastic fabrications, even complete subassemblies. But in most every case, CMI is actually delivering a custom solution to a complex engineering, design or materials challenge. In fact, CMI takes on projects that others won't. Few fabricators can match our unique blend of 50 years of experience, reputation for innovation, skill of our team, expertise of our engineers, adherence to quality certifications, and commitment to client success. The company is looking for a self motivated oriented individual that likes new challenges everyday. The position offers an individual to use their full skill set to advance the interests of the company. The position also offers full benefits including healthcare, dental, vision, life insurance, short term disability, 401k retirement and profit sharing plans. Edit, set up, and operate CNC equipmemt to produce product according to print specifications; programming capabilities a plus Troubleshoot programs including speeds, feeds and tooling Verify and document in process work orders Ensure quality product by using necessary measuring equipment including calipers, micrometers and pi tapes Basic maintenance on equipment Meet production deadlines by following manufacturing schedule and procedures Pay Range: $26-32/hr Requirements High school diploma/GED required (2YR Technical Education Preferred) Familiarity with Microsoft Office suite Advanced written and oral communication skills Blueprint Reading Good Organizational Skills US Citizenship Required

TempToFT Job Title: CNC Mill/Lathe Operator/Set-up Pay Rate: $20-24 PER HOUR BOE Hours: Monday through Thursday 6AM-430PM Occasional OT on Friday 6am-430pm Job Description: Job Summary: Set up & operate CNC Mill/Lathe to change, load/unload & produce parts Responsibilities: • Monitor & maintain equipment such as lubricant & cooling levels • Apply basic concepts of Alegra & Geometry • Avidly interpret Blueprints Physical Requirements: LIFTING: ENVIRONMENT: 1-20LBS STANDING, PUSHING PULLING Work Environment: o PACE OF ENVIRONMENT: MED o LEVEL OF SUPERVISION: HIGH o LEVEL OF INTERACTION WITH OTHERS: MED o ABILITY TO HANDLE MULTIPLE TASKS: MED o LEVEL OF EXPERIENCE REQUIRED: HIGH o TRAINING PROVIDED: LIMITED Location: Akron Dress Code: STEEL TOED SHOE/BOOTS CNC Mill & Lathe Operations. $20- $24 per hour BOE Essential Duties and Responsibilities include, but are not limited to, the following: • Operate programmed machinery to change, load/unload, and produce parts to specified design. • Monitor the feed and speed of machines during the machining process. • Inspect items as instructed and provide feedback to management to ensure any quality defects can be avoided in the future. • Inspect parts per blueprint as instructed. • Ability to apply concepts of basic algebra and geometry. • Monitor and maintain lubrication and coolant levels / points. • Clean up job site after work and return equipment and tools. • Supply own basic hand and measuring tools. Requirements / Competencies Expected: • Ability to read blueprints • Must demonstrate job responsibility consistency • Requires the ability to read and follow detailed written and/or verbal instructions • Demonstrate eagerness to learn different part/machine setups and operations. • Must demonstrate regular attendance 20.00 Qualifications High School Minimum 2 YEARS

Job Description Seeking a **CNC Machinist **to operate and set up CNC mills, lathes, and Swiss-type machines. This role produces high-quality machined components while following blueprints and technical instructions. Ideal candidates have 1 year of CNC experience and are eager to grow their skills in a hands-on manufacturing environment. Key Responsibilities- Read and interpret blueprints, sketches, and operation sheets to determine setup and machining requirements. Prepare tooling, fixtures, and workpieces; align and secure components for machining. Set machine controls for spindle positioning, cutting depth, speed, feed, and coolant flow. Monitor CNC machines and make adjustments to maintain quality or correct errors. Measure parts to ensure conformance with specifications. Perform routine cleaning and basic machine maintenance. Follow all safety protocols and wear required personal protective equipment. Skills and Qualifications- High school diploma or equivalent. At least 1 year of experience operating CNC mills or lathes. Ability to read and interpret blueprints and technical drawings. Basic math skills (fractions, decimals, measurements). Competence in CNC machine setup and operation. Ability to lift up to 50 lbs and work in a physically active environment. Reliable, self-motivated, and effective in a team environment. Clear verbal and written communication skills. Work Environment- Temperature-controlled manufacturing environment. Fast-paced, hands-on production setting. Use of personal protective equipment required; adherence to safety protocols. Technical Proficiency- GD&T (Geometric Dimensioning & Tolerancing) CNC mills (3-5 axis) CNC lathes (2-4 axis) CNC Swiss-type lathes Blueprint reading and machine setup Salary info: $35 - $35 / hr

Title: CNC Machinist Shift: 1st Shift (7am-3:30pm, M-F) Salary: $35-$40/hr CNC Machinist Role: Produces machined parts through maintaining quality and safety standards; keeping records; maintaining equipment and supplies. In this role you will operate under flexible parameters'. The primary goal of this position is to achieve excellence in all facets of the position. Providing the highest quality product safely, effectively, and efficiently decreases accidents and errors and increase profits. Machinist Responsibilities: Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; trimming heads. Loads feed mechanism by lifting stock into position. Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards. Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. Maintains safe operations by adhering to safety procedures and regulations. Maintains equipment by completing preventive maintenance requirements; following manufacturer instructions; troubleshooting malfunctions; calling for repairs. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Documents actions by completing production and quality logs. Updates job knowledge by participating in educational opportunities; reading technical publications. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Work hours as posted, being on time and at the place of work at the start of the shift Move product in and out of the department by use of a forklift About You: High School Diploma or equivalent Mechanical aptitude 2+ years of CNC Machine Operation experience Lift up to 50lb boxes Ability to perform at high levels in a fast pace constantly changing environment Ability to work as part of a team Ability to work overtime hours Reading blueprints Proficient on a Tow Motor Skilled with measurement instruments: Micrometers, Calipers, Height Gages, Optical Comparators Ability to see small parts, burrs, radius, and handheld tools If you are driven and a team player, we would like to hear from you. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate/ occasionally loud. #INDRBR

We are seeking a skilled CNC Swiss Lathe Machinist to join our team. You will be responsible for setting up and operating machines to produce precision parts and components. This is a full-time position on 2nd shift with competitive pay, benefits and shift differential. Responsibilities: * Set up and operate CNC Swiss machines * Read and interpret blueprints and related technical data to determine tooling requirements, setup procedures and machining methods and sequences. * First Article Inspection and inspection of parts during production to maintain quality throughout the production run * Must have the ability to maintain close tolerances (within .001) tolerance * Knowledge to review and interpret "G" and "M" Code * Prepares and pre-sets all tools needed for machining operations * Must have an understanding of machine tool accuracies, fixture offsets, and tool offsets * Knowledge of cutting tool feeds, speeds and tool life * Work closely with ME/CNC Programmers on new job prove-out, troubleshooting and improving processes * Work with ME department to optimize processes and identify insourcing and reprocessing opportunities * Self-starter and self-motivated person, ability to work with minimal supervision * Ability to work overtime regularly * Ability to work well in team environment * Perform other duties as assigned Qualifications: * 3 years of experience setting up and operating Swiss Lathe or equivalent machine * Experience with Mitsubishi controls and Citizen Machines * Ability to use Comparator, micrometers, air gages, calipers, profilometer, etc. * Strong knowledge of GD&T * Ability to setup machines including editing speeds, feeds, tool and fixture offsets * Experience in programming CNC machines is a plus Education: * High school diploma or equivalency Benefits: * Competitive pay based on experience * Health insurance coverage options * Retirement plan options * Paid time off * Holiday pay This position requires either a US Person (as defined in applicable export regulations) or a non-US person who is eligible to obtain required export authorization. An equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Work Location: In person

CNC Machinist (2nd Shift) | Cleveland Want to build large complex fabrications for submarines? That's one of the important things we do here at AT&F. If so, learn more about our team, how we work together, and the amazing fabrications we build at ********************** You are part of the AT&F Family starting on the first day. Medical benefits start on your first day. Who Are We? We Build, Protect, Energize, and Move the World through Metal Fabrication Founded in 1940, AT&F is a major producer of components for construction cranes, mining equipment, defense projects, structural sections for shipbuilding, power industry related components, and specialty stainless steel fabrications. AT&F is comprised of specialized Business Units (BUs): Heavy Fabricating, Precision Processing, AT&F Advanced Metals, and AT&F Wisconsin. Our multiple facilities have over 600,000 square feet of manufacturing space and over 200 Team Members. AT&F is in its fourth generation of family leadership. While the values of the organization are like those found in family-run firms, AT&F is also forward thinking, sophisticated, and professional. Who We Want on Our Team? We offer competitive salaries plus profit sharing and a full range of benefits for our Team Members, including health, dental, vision, life insurance, 401(k), tuition reimbursement, paid time off, holidays, AT&F clothing program, a Wellness Program, Military Veterans Resource Group, ESL Classes, and opportunity for career growth. However, our Team is motivated by more. Teamwork, Purposeful Work, and Getting Better at our Craft. Our growth is continuing with current and new customers. Do you want to be a part of a Fabricating Team that is preforming challenging, purposeful work? Our team lives by our Core Values: Work Hard, Do What You Say You'll Do, Take Care of Each Other, Quietly Lead, Invest, and Run To It. Ask us about these Core Values to find out if this will be the place you are looking for. The Goals and Challenges of this Role: Review engineering prints, select and acquire appropriate tooling. Ability to run large machining centers either VTL or HBM Edit and maintain CNC programs Perform machine setup and operation as needed. Implement continuous improvement. Inspection and measurement of machined components. Train and develop less experienced AT&F machinists. What You Should Bring to this Role: A minimum of three (5) years experience in component CNC machining. Dealt with lower run quantities per part. Ability to interpret blueprint/drawing specifications and GD&T. Applied experience with various inspection methods (hand gages, CMM, etc.) Proven ability to develop the machining skills of others. Proficiency with AutoCAD and Fanuc, Siemens, G code programming. Overhead crane operation and rigging experience Basic computer skills for email, web-based communications. Pay Range: $25.00 - $32.00 per hour. This range reflects the minimum and maximum for the role. Starting pay depends on your skills, experience, and ability to perform the job.

CNC MACHINIST Position Type: Temp to Hire or Direct HirePosition Hours: 1st Shift, 7:00am - 3:30pm, Monday-FridayPosition Location: Cleveland, OhioPosition Salary: $25.00 - $30.00 Primary Purpose of the Job:Set-up and use manual and CNC (Computer Numerically Controlled) machines to produce (machine, form and/or assemble) plastic, acrylic and steel parts for use in client's Corrosion Test Chamber and Metal Finishing Equipment product lines. Essential Duties: Review orders, drawings and prints for accuracy and applicability. Assess and maintain inventory needs. Be able to download programs, perform test operations, and produce parts to order/drawing/specification. Set-up and use lathe(s) to produce parts to order/drawing/specification. Set-up and use milling machine(s) to produce parts to rder/drawing/specification. Set-up and use drill press(es) to produce parts to order/drawing/specification. Set-up and use vertical and horizontal cut-off saw(s) to produce parts to order/drawing/specification. Set-up and use planer(s) to produce parts to order/drawing/specification. CNC programming - be able to perform programming/edits at the machine in G-code (HAAS). Fabricate plastic and steel parts to specification. Assemble parts to final product. Perform routine machine maintenance. Visualize, design, and create fixtures and tooling for manufacturing efficiency. Other Duties: Assist with equipment assembly as necessary. Keep all work areas clean and organized. Document time & material when producing parts. Follow all safety policies. Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality seamless customer service. Required Skills/Experience: Ability to read, visualize and follow drawings, blue prints, and schematics. Knowledge of G-code is a plus. Knowledge SheetCAM/CAM software is a plus. Ability to learn job-related material through oral instruction and observation. This learning takes place mainly in an on the-job training setting. Ability to accurately read measuring instruments (i.e. calipers, tapes, gauges, etc.) Ability to use basic hand and/or power tools. Ability to prioritize multiple projects. Strong work ethic - ability to report on time for all scheduled workdays/shifts. Required Education/Experience: Basic reading, writing, and arithmetic are required. A high school diploma or equivalent is required. Additional technical training would be a plus. Five years of manufacturing experience. Working Conditions: Working conditions are normal for a manufacturing environment. Safety-toe footwear and eye protection are required when working in the shop. Machine and tool operation may require the use of hearing protectors. Certain duties may require the use of a mask/respirator. Position requires the ability to: Remain in a standing position for extended periods of time. Bend or stoop repeatedly or continually over time. Lift objects up to 50 pounds.

Growing Eastlake Ohio Aerospace/Defense & Motion Control Company providing precision machining, contract manufacturing has an immediate opening for a CNC Lathe/Mill Machinist. Sign on bonus available! Competitive pay and benefits! Job Description Job Summary: The CNC Lathe/Mills Setup/Operator will work with our team of engineers and machinist to help produce a variety of products for industries including Aerospace, Defense, process control and other applications. The ideal candidate will play a key role in the organization assisting with manufacturing of products in an environment that is fast paced and dynamic. Essential Duties and Responsibilities: Sets up and operates numerical control machine to cut, shape or form metal work pieces to specifications Review setup sheet and specifications to determine setup procedure, machining sequence, and dimensions of finished work piece. Attaches fixture to machine bed and positions and secures work piece in fixture according to set up instructions using clamps, bolts, hand tools, power tools and measuring instruments such a rule and calipers. Assembles cutting tools n tool holders and positions tool holders in machine spindles as specified, using hand tools, or inserts cutting tools in specified machine magazines. Loads control media, such as disk, tape, or punch card, in machine control console or enter commands to retrieve preprogrammed machine instructions from data base. Manipulates controls and enters commands to index cutting tool to specified set point and to start machine. Observes and listens to machine operations to detect malfunctions, such as worn or damaged cutting tools. Changes cutting tools and location of work piece during machining process as specified in set p instructions. Measures work piece for conformance to specifications, using measuring instruments such as micrometers, dial indicators and gauges Notifies supervisor of discrepancies. May adjust machine feed and speed and change cutters to machine parts according to specifications when automatic programming is faulty or machine malfunctions May machine materials other than metal such as composites, plastic and rubber. May instruct other workers May use statistical process control techniques Other duties as assigned Performance Metrics and Expectations: On-time delivery Production rates Quality Essential Traits: Excellent problem solving skills, highly analytical, uses fact-based problem solving methods Competitive; takes ownership and demonstrates a bias for action. Responsible, disciplined, and accountable, leads by example… attention to detail. Is a champion of lean methods. Respect for others, high integrity, operates effectively in a team environment Ability to manage multiple priorities effectively with strong organizational skills Growth oriented, looks for the best practice, continuous improvement mentality Innovative and creative… applies new approaches to solving problems. Strong interpersonal/team building skills including the ability to communicate with all levels of the organization and participate on multi-functional teams. Qualifications Education and Experience Qualifications: High school diploma or GED Ability to read / interpret blueprints Experience using various mechanical inspection tools Understanding of CNC Programing and G&M Codes Knowledge of CNC equipment Knowledgeable with Word and Excel Additional Information Physical Demands: The physical demands described here are represented of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, reach with arms and hands and use hands and fingers to handle or feel objects, tools or controls and speak and hear. The employee is occasionally required to stoop, kneel and crouch. The employee must occasionally lift and/or move up to 25 lbs. Specific vision abilities that may be required by this job include close vision, distance vision and color vision.

Department CNC Department Employment Type Full Time Location Slabe Machine Products Workplace type Onsite Compensation $25.00 - $30.00 / hour Key Responsibilities Skills Knowledge and Expertise Benefits About The Slabe Machine Products The word technology is defined as the practical application of knowledge. Slabe Machines secret to delivering on-time, low-cost, and complex components is to fill a shop with a wide variety of technologically advanced machine tools and ensure that they are efficiently put to use by a team that embraces a wide variety of lean techniques. Adhering to this strategy for the past 80 years has resulted in us becoming world class manufacturer able to offer everything from design and prototyping to full scale production, all at low costs.

Job Description CNC Machinist - 2nd Shift Looking for a great opportunity to put your CNC skills to work on 2nd shift? We're hiring experienced CNC machinists who want steady hours, competitive pay, and the chance to make an impact on exciting projects in industries like aerospace, defense, and process control. This role is perfect for machinists who enjoy working independently, take pride in producing quality parts, and want to be part of a supportive team-even if your workday starts later than most. Why You'll Want This Job: Consistent 2nd shift schedule with premium pay opportunities Operate CNC mills and lathes on a variety of parts and projects Build your expertise while running multiple machines Work in a clean, safe, and well-organized environment Join a company that values precision, teamwork, and reliability What You Bring to the Table: 3-5 years of CNC machining experience Confidence reading blueprints and inspecting parts for accuracy Knowledge of CNC tooling and machine operations Dependable, detail-oriented, and able to work efficiently with minimal supervision Ability to stay active throughout your shift and lift up to 50 lbs as needed The Perks: Competitive hourly pay (plus shift differential for 2nd shift) Training and development to grow your career A workplace built on respect, teamwork, and continuous improvement The satisfaction of knowing your work directly supports industries where precision matters most Ready to make your mark on 2nd shift? Bring your CNC expertise to a team that values your skills and dedication.

CNC Machinist - 2nd Shift Looking for a great opportunity to put your CNC skills to work on 2nd shift? We're hiring experienced CNC machinists who want steady hours, competitive pay, and the chance to make an impact on exciting projects in industries like aerospace, defense, and process control. This role is perfect for machinists who enjoy working independently, take pride in producing quality parts, and want to be part of a supportive team-even if your workday starts later than most. Why You'll Want This Job: Consistent 2nd shift schedule with premium pay opportunities Operate CNC mills and lathes on a variety of parts and projects Build your expertise while running multiple machines Work in a clean, safe, and well-organized environment Join a company that values precision, teamwork, and reliability What You Bring to the Table: 3-5 years of CNC machining experience Confidence reading blueprints and inspecting parts for accuracy Knowledge of CNC tooling and machine operations Dependable, detail-oriented, and able to work efficiently with minimal supervision Ability to stay active throughout your shift and lift up to 50 lbs as needed The Perks: Competitive hourly pay (plus shift differential for 2nd shift) Training and development to grow your career A workplace built on respect, teamwork, and continuous improvement The satisfaction of knowing your work directly supports industries where precision matters most Ready to make your mark on 2nd shift? Bring your CNC expertise to a team that values your skills and dedication.

We need top level CNC Machinists to expand our 2nd Shift and we are willing to pay up to $30/hr for those with the right skills!These are full-time, standard positions, not temporary! Duties: Machine quality parts from prints and work orders in a timely and accurate manner in a job shop environment with large machined parts including weldments. We require fully proficient CNC Machinists who are proficient operating various CNC Equipment including Large Vertical and Horizontal Mills. Must be self-sufficient with performing own set-ups, programming at the machine when needed, proficient with feeds and speeds, tooling, shop math and all other machining related duties. Shift Details - Monday - Thursday 4:00 PM - 2:30 AM. Overtime as needed East End Welding provides services to a global market. We offer a comprehensive benefits package that includes competitive wages, major medical, and dental, 401(k) retirement plan, paid vacations and holidays, a tool purchase program.

Machinist - Manual & CNC Lathes and mill Barberton, Ohio Pay: $27-$29/hour to start Hours: Monday-Friday, 6:00 a.m. - 4:00 p.m. Excellent Benefits: Company pays 85% of premium We are seeking an experienced Machinist with strong skills in both manual and CNC lathes and mills. This role offers consistent hours, excellent pay, and outstanding benefits with a company that values craftsmanship, precision, and long-term career growth. Benefits Competitive pay starting at $27-$29/hour Excellent schedule: Monday-Friday, 6:00 a.m. - 4:00 p.m. (no weekends) Comprehensive benefits package with 85% of premium paid by the company Long-term career opportunity with growth potential Responsibilities Set up, operate, Edit and maintain manual and CNC lathes and milling machines Interpret blueprints, technical drawings, and work instructions Perform precision measurements and inspections to ensure quality standards are met Read Calipers and Micrometers Troubleshoot issues and make adjustments as needed to maintain production accuracy Maintain a safe, organized, and clean work environment Collaborate with the team to meet production schedules and quality goals Qualifications 3+ years hands experience operating manual and CNC lathes and mills Strong mechanical aptitude and attention to detail Ability to read and interpret blueprints and precision measuring instruments Solid problem-solving skills with a commitment to quality and safety Dependable, team-oriented, and eager to contribute to a stable, growing company #INDDH

Our Client a leading global manufacturer of metal powders, complex fabrications, and additively manufactured parts made from refractory metals, is seeking a 5-Axis CNC Milling Machinist at their Euclid, OH facility. This person will set up and operate numerically controlled equipment to perform various machine functions, such as cutting, turning, drilling, milling, reaming, boring of metallic and nonmetallic work pieces. This is a 3rd shift position, hours are from 10:00 PM - 6:30 AM; training will occur on 1st shift (6:00 AM - 2:30 PM) for 30-60 days. $28+/hr., depending upon skill level Responsibilities: Reads and interprets blueprints, routing sheets, sketches, and related technical data to determine tooling requirements, setup procedures, control settings and machining methods and sequences. Estimates requirements for time, tooling, and material to complete job. Prepares purchase requisitions for tooling and material utilizing SAP system software. Designs and fabricates fixtures as needed. Programs machines for manufacturing using CAD/CAM software. Documents programs for ISO compliance. Sets up job by loading control media in machine controller or enters commands to retrieve preprogrammed instructions from database, prepares and presets all tools. Enters commands or manually adjust machine controls to correct malfunctions or out-of-tolerance machining. Discusses control media errors with supervisor or programming personnel to resolve problems. Operates, maintains and monitors machine operations which may include tool changing, offsetting and slight adjustments to meet customer specifications. Operator makes minor adjustment to preprogrammed instructions to meet product requirements. Verifies that fixture setup meets acceptable quality standards regarding turning, milling and boring sizes, depths, angles, or other specifications. Requirements: High School of Vocational School Diploma and/or GED required. 3-5 years previous CNC machining MUST have 5-Axis job knowledge Must have experience working on horizontal and vertical mills The ability to read and interpret complex blueprints and layouts, understand general tolerances, utilize measuring equipment (optical comparator, micrometers, dial calipers, dial indicators and any necessary inspection equipment) and computer software programs. Display competence in operating and maintaining all machines in defined department. Business needs and trade compliance requirements mandate that this position be held by a U.S. Citizen or U.S. Permanent Resident. Preferred Additional Skills: Experience designing programs, providing estimated machining times and costs Experience with FANUC, HAAS, OKUMA controls. CAD / CAM software training/experience. Horizontal/Vertical machining center experience preferred