Numerical control operator jobs in Towson, MD - 294 jobs

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities : The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Pull broaching / Pull broaching Setup and operate a vertical slotting machine to create keyways Operate keyway broaching machines to produce precision components. Setup and operate Bridgeport and Lagun conventional milling machines to drill and tap set screws Monitor production processes to ensure quality standards are met. Collaborate with team members to improve production efficiency. Maintain a clean and safe work environment. Operate a forklift to load and unload material. Other tasks/functions/projects as assigned. Requirements: High school diploma or equivalent; relevant technical certification is a plus. Proven experience as a machinist, specifically with broaching machines. Strong understanding of machining processes and techniques. Ability to read and interpret technical documents and blueprints. Proficient in using measuring tools and equipment. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. Learn more about U.S. Tsubaki at: w ww.ustsubaki.com/careers U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Compensation details: 25-30 Hourly Wage PIbe2c185e7f88-30***********1

CNC Machine Operator 💲 Pay Range: $18 - $28 per hour 🕒 Shift Hours: All shifts available 1st Shift - 6:00 AM to 2:30 PM, Monday through Friday 2nd Shift - 2:30 PM to 11:00 PM, Monday through Friday Are you a skilled CNC Machine Operator looking for a new opportunity? Look no further! The Dixon Group is seeking a skilled and motivated CNC Operator to join our team in Chestertown, MD! This key role is at the heart of our production, transforming complex blueprints into high-quality, precision metal components. You'll operate state-of-the-art CNC (Computer Numerical Controlled) mills and lathes and, just as importantly, serve as our quality expert by conducting meticulous inspections. The ideal candidate has a strong ability to read and interpret blueprints, is highly skilled with precision measuring tools (like calipers and micrometers), and is a proactive problem-solver. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. 🔧What You'll Do: Set up, operate, and fine-tune CNC machines to manufacture precision components. Run multi-axis programs for milling, drilling, threading, reaming, and profiling. Interpret blueprints and work instructions with accuracy and attention to detail. Perform part inspections using precision measurement tools (micrometers, calipers, gauges). Collaborate with other machinists and engineers to improve processes and efficiency. Maintain a clean, safe work environment with a focus on quality and consistency. 🎯What We're Looking For: High school diploma or equivalent required; technical training or related coursework preferred. At least 2-5 years of CNC experience is preferred. Experience as a CNC Mill or Lathe Operator is preferred. Previous experience in a manufacturing or machine shop environment is required. Comfortable reading blueprints and using calipers, micrometers, and other QC tools. Good with shop math. Reliable, team-oriented, and always looking to improve. Ability to lift 50 lbs and stand for extended periods of time. Mechanical aptitude. Great attitude and attendance. 🌟 What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Who YOU are and what YOU can become: A machine operator must have excellent attention to detail and possess a working knowledge of tool set-up and CNC controls. This position requires continuity between all shifts, support staff and supervisor. This role must be able to document machine and tool conditions with clear communication. In addition, this position is responsible for setting up, operating and overseeing our computer numerical controlled (CNC) machines. Ability to adhere to safety procedures and regulations while driving to meet quality requirements. Who WE are and where WE are going: At MRA Systems, our employees have amazing opportunities to work on advanced technologies and systems that support thousands of customers and millions of people worldwide every day. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio. We are looking for people with innovative ideas and the drive to help us grow into the future. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. At ST Engineering MRAS, we are also rapidly augmenting our maintenance, repair and overhaul (MRO) capabilities leveraging the company's expanded aircraft nacelle portfolio as well as it's materials and processing expertise. What YOU will do: This role works from MFG process plans, manuscripts, NC set up documents, tool orders, drawings, sketches, holding fixture location diagrams and similar information. Reads and evaluates information to ensure that latest revisions have been incorporated. Ability to access files from a windows-based computer to obtain correct working instructions. Reads the NC set up documents and loads the required Fixtures, cutting tools and Cutting tool holders in order to process the job being set up on the machine. Sets up machine, loads and presets cutting tools to the proper torque values. Assures that the machine is functioning up to standards shown during initial training. Prior to loading Fixtures or parts, operator will conduct visuals and take necessary steps to safely clean the critical interface areas. This role must be able to follow direction for setting machine local coordinate systems on the current fixture. Assures machine has the correct fixture offset, tooling and NC programs before safely proceeding with the defined process. Checks initial work piece for conformance to dimensions and specifications before proceeding with multiple production parts. Makes subsequent runs to complete the job, periodically checking parts for conformance to dimensions and specifications. Provide feedback to next shift, support staff, and supervision as it relates to machine condition, process status, tool life for perishable tooling, and fixture condition. A Machinist P1 is also responsible for documenting actions by completing production and quality logs. Clear communication is a must in that the Operator must be able to interpret XYZ axis movements and safely jog a machine utilizing the pendant or control while avoiding collisions with fixtures and parts. This role, machinist, one must be able to understand the basics of G and M codes. Maintains equipment by monitoring preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; Alerting team when repairs may be needed. Maintains assigned work area in a clean, safe and orderly condition. Utilizes boom crane, and/or variety of hand operated battery powered skid lifts: forklifts tow motors, hand trucks, dollies, "A" frames, etc. Must be able to set and operate, including, but not limited to: Large 5 axis Gantry Milling machines, multi-axis - multi spindle drilling machines. Tool Pre-set machines for run-out, length and diameter. Perform all work on machines with help of hoist and cranes as required. Ability to safely walk onto machine tables to secure parts and fixtures. What YOU must bring to Succeed: * HS Diploma / GED equivalent * Minimum of 3-4 years of relevant experience and or a trade school certificate with 2 year in a CNC Machine Operator Role. * Requires a working knowledge of methods and techniques used in machine operations and in setting up and operating NC machines. * Requires a working understanding and introductory use of the following elements of Machine Shop: o Machine shop math for setting fixture offsets and calculating tolerances o Ability to read sketches, drawings and specifications o Familiar with precision measuring instruments such as Calipers height gauge; vernier calipers, inside, outside and depth micrometers; dial indicator, etc. Additional Preferred Qualifications: * Able to physically be mobile to walk, stand and function on machine tables and stairs on a consistent basis. * Effectively utilize communication tools such as email, radio, or company messenger to communicate issues, concerns, or any other information needed to complete any and all jobs. * Ability to physically work in shop working conditions, such as exposure to dirt, fumes, excessive cold, excessive heat, and noise. * Ability to obtain and maintain Crane/Hoist Certification. * Knowledge of multi axis machine movement * Ability to run manual milling and turning equipment * Understanding of tolerances and GD&T dimensions. * Train and guide less experienced employees on operation of CNC controllers, Manufacturing process and machine(s) At ST Engineering MRAS, we offer great rewards, competitive pay, career advancement and growth opportunities. Salary for this role: $25.00 per hour. ST Engineering considers several factors with extending job offers, including but not limited to candidates' key skills, relevant work experience, education/training/certification, job level, and work location. Base salary is only one component of our competitive Total Rewards package. ST Engineering MRAS offers these incentives for hourly roles: * Competitive Healthcare Benefits Package * 401k Savings Plan * Annual Pay Increases and COLA pay * Shift Differential Pay for off shift schedules * Overtime Opportunities * Paid-Time Off/Vacation * Educational Assistance Reimbursement * Health & Safety Personal Protective Program * Free Onsite Gym with weekly fitness classes * On-the-Job Training Employment Notice: Background and Drug Screening Requirements As part of our commitment to maintaining a safe and secure workplace, successful completion of a background check and drug screening is a mandatory condition for employment. All offers of employment are contingent upon satisfactory results from these screenings. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at ************, or by email at ***********************. Nearest Major Market: Baltimore Apply now "

Now Hiring CNC Machine Operators - All Shifts Available (1st, 2nd & 3rd) | $1,000 Hiring Bonus! Are you ready to launch or grow your career in manufacturing? We're hiring CNC Machine Operators for all shifts and offering a $1,000 hiring bonus! Experience is preferred, but we're happy to train motivated candidates. Join a forward\-thinking manufacturing team focused on quality, precision, and innovation. We offer career advancement opportunities, comprehensive benefits, and a supportive environment where your work truly matters. What You'll Do: Operate CNC machining and turning centers to produce precision components. Read and interpret part drawings and specifications. Perform inspections using micrometers, calipers, gauges, and other measuring tools. Maintain tolerances within +\/\- .05mm through offsets and minor tool changes. Load, inspect, assemble, and package parts per documented instructions and quality standards. Accurately complete production and inspection documentation. Support cross\-training initiatives on various machines as needed. Follow all safety and quality procedures, and maintain a clean work area. What We Offer: $1,000 hiring bonus Weekly pay and competitive wages Shift premiums for 2nd and 3rd shifts 8\-hour shifts with paid breaks Medical, dental, and vision insurance Health Savings Account (HSA) option Life insurance and short\-term disability Paid vacation and holidays 401(k) with company match What We're Looking For: 6+ months of CNC machine operation experience (preferred) Familiarity with Fanuc controls on machines such as Mori Seiki, Okuma, or Hardinge Ability to lift heavy objects frequently and stand for an 8\-hour shift Strong attention to detail and quality standards Dependability, self\-motivation, and a collaborative attitude Good attendance and safety record Production Lead candidates should also have a 1\-year technical certificate and experience in training and troubleshooting. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"680936032","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Work Experience","uitype":2,"value":"6 months"},{"field Label":"Salary","uitype":1,"value":"110k\-130k"},{"field Label":"City","uitype":1,"value":"Germantown"},{"field Label":"State\/Province","uitype":1,"value":"Wisconsin"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"53022"}],"header Name":"CNC OPERATORS","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00232003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"**********08370098","FontSize":"12","google IndexUrl":"https:\/\/wraconsulting.zohorecruit.com\/recruit\/ViewJob.na?digest=TIbr6QM7KbSyMpl69uAJyZUSi4Yx.ob RPA@kda5Cf6g\-&embedsource=Google","location":"Germantown","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"ksor076eddcd15af141bcb8e626b9eef594d6"}

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Job Title: CNC Operator Location: King of Prussia, PA (On-Site, Full-Time) Responsibilities: Operate CNC fabrication machinery for cutting and finishing custom stone countertops and surfaces. Read shop drawings, templates, and layout specifications. Use hand tools and fabrication equipment with accuracy. Handle, stage, and move stone materials. Maintain high standards of quality and precision. Qualifications: CNC machine operation experience. Hand tool and saw operation skills. Forklift operation experience is a plus. Strong problem-solving skills and attention to detail. Prior experience in stone fabrication or construction preferred. Experience: 2 10 years Other Benefits: Overtime opportunities. Growth and advancement potential. Supportive, team-oriented environment. Stable workload with an established brand. This is a remote position.

Job Description CNC Machine Operator (Vertical Mill) Pay: $20-25/hr. +15% for 2nd or 3rd Shift Shift: 2nd = Mon - Thu (1pm - 11pm) Ability to train on 1st shift (Mon - Fri - 7am to 3pm) Description: We are seeking a CNC Machine Operator to set-up and run the Vertical Mill for a high-tech metal fabrication shop in Hanover, PA. Qualifications: 1-3 years of proven experience working in a metal shop manufacturing environment. 1+ years experience as a CNC Operator and ability to set-up and operate a vertical mill CNC Machine. Exposure to Gibbscam or Solidcam is a plus (not required) Strong attention to detail, ability to work in a fast-paced, team environment Ability to make decisions Job Duties: Must be capable of utilizing common measurement devices to check part compliance to specifications and read blueprints. Must be able to read drawings, including GD&T. Must be able to read micrometers, calipers, and other inspection devices. Must be able to check parts for accuracy and quality against supplied drawings. Provides input to programmers on better ways to produce parts. Responsible for production of multiple machines Responsible for daily housekeeping of the work area including chip removal and machine internal cleanouts. Assist with machine preventative maintenance as needed. Benefits: Health / Dental / Vision 401k plan PTO 8 paid Holidays Employee Assistance Program (EAP)

Title: 1st shift CNC Machine OperatorLocation: York, PAJob Type: Contract to HireRate: $23.00 - $24.00/HourResponsibilities: Set up and operate CNC machines such as plasma cutters, beam drill lines, and angle lines to process structural steel components. Read and interpret fabrication drawings, blueprints, and work orders to determine job specifications. Load and secure steel beams, plates, and other materials using overhead cranes and rigging equipment. Monitor machine operation, making adjustments for accuracy and quality as needed. Use precision measuring tools such as tape measures, calipers, and squares to verify tolerances. Perform basic programming edits or adjustments to accommodate different material sizes or thicknesses. Conduct routine maintenance and troubleshooting on CNC machinery to ensure reliable operation. Maintain a clean and safe work environment in accordance with OSHA and shop safety protocols. Qualifications: High school diploma or GED required; technical or trade school training preferred. 2+ years of CNC machine operation in a structural steel fabrication or heavy manufacturing environment. Ability to read and interpret structural steel shop drawings. Skilled in using precision measurement tools. Experience with overhead cranes, forklifts, and rigging preferred. Strong mechanical aptitude and attention to detail. Ability to work independently and as part of a team in a fast-paced environment.

CNC Machine Operator Pay Range: $18 - $28 per hour Shift Hours: All shifts available * 1st Shift - 6:00 AM to 2:30 PM, Monday through Friday * 2nd Shift - 2:30 PM to 11:00 PM, Monday through Friday Are you a skilled CNC Machine Operator looking for a new opportunity? Look no further! The Dixon Group is seeking a skilled and motivated CNC Operator to join our team in Chestertown, MD! This key role is at the heart of our production, transforming complex blueprints into high-quality, precision metal components. You'll operate state-of-the-art CNC (Computer Numerical Controlled) mills and lathes and, just as importantly, serve as our quality expert by conducting meticulous inspections. The ideal candidate has a strong ability to read and interpret blueprints, is highly skilled with precision measuring tools (like calipers and micrometers), and is a proactive problem-solver. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: * Set up, operate, and fine-tune CNC machines to manufacture precision components. * Run multi-axis programs for milling, drilling, threading, reaming, and profiling. * Interpret blueprints and work instructions with accuracy and attention to detail. * Perform part inspections using precision measurement tools (micrometers, calipers, gauges). * Collaborate with other machinists and engineers to improve processes and efficiency. * Maintain a clean, safe work environment with a focus on quality and consistency. What We're Looking For: * High school diploma or equivalent required; technical training or related coursework preferred. * At least 2-5 years of CNC experience is preferred. * Experience as a CNC Mill or Lathe Operator is preferred. * Previous experience in a manufacturing or machine shop environment is required. * Comfortable reading blueprints and using calipers, micrometers, and other QC tools. * Good with shop math. * Reliable, team-oriented, and always looking to improve. * Ability to lift 50 lbs and stand for extended periods of time. * Mechanical aptitude. * Great attitude and attendance. What We Offer: * Medical, dental, and vision insurance for you and your family * Competitive salary * Bonus programs * 401K retirement plan * Training opportunities * Tuition reimbursement * Paid vacation, PTO, and holidays * Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Job Description CNC Machine Operator ???? Pay Range: $18 - $28 per hour ???? Shift Hours: All shifts available 1st Shift - 6:00 AM to 2:30 PM, Monday through Friday 2nd Shift - 2:30 PM to 11:00 PM, Monday through Friday Are you a skilled CNC Machine Operator looking for a new opportunity? Look no further! The Dixon Group is seeking a skilled and motivated CNC Operator to join our team in Chestertown, MD! This key role is at the heart of our production, transforming complex blueprints into high-quality, precision metal components. You'll operate state-of-the-art CNC (Computer Numerical Controlled) mills and lathes and, just as importantly, serve as our quality expert by conducting meticulous inspections. The ideal candidate has a strong ability to read and interpret blueprints, is highly skilled with precision measuring tools (like calipers and micrometers), and is a proactive problem-solver. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. ????What You'll Do: Set up, operate, and fine-tune CNC machines to manufacture precision components. Run multi-axis programs for milling, drilling, threading, reaming, and profiling. Interpret blueprints and work instructions with accuracy and attention to detail. Perform part inspections using precision measurement tools (micrometers, calipers, gauges). Collaborate with other machinists and engineers to improve processes and efficiency. Maintain a clean, safe work environment with a focus on quality and consistency. ????What We're Looking For: High school diploma or equivalent required; technical training or related coursework preferred. At least 2-5 years of CNC experience is preferred. Experience as a CNC Mill or Lathe Operator is preferred. Previous experience in a manufacturing or machine shop environment is required. Comfortable reading blueprints and using calipers, micrometers, and other QC tools. Good with shop math. Reliable, team-oriented, and always looking to improve. Ability to lift 50 lbs and stand for extended periods of time. Mechanical aptitude. Great attitude and attendance. ???? What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

We are looking for a skilled Milling Operator to safely and efficiently operate asphalt milling machines on roadway, parking lot, and site development projects. This role is responsible for the setup, operation, and basic maintenance of milling equipment to ensure accurate surface removal and preparation for paving. The ideal candidate has strong equipment experience, attention to detail, and a commitment to safety and quality workmanship. Responsibilities Operate milling machines to remove asphalt pavement to specified depth, grade, and slope Set up equipment, including drum selection, grade controls, and conveyor adjustments Perform pre-shift inspections and routine maintenance to ensure equipment is in safe working condition Coordinate with ground crew and foreman for efficient material removal and loading Monitor milling depth, speed, and pattern to meet project specifications Maintain awareness of surrounding personnel, traffic, and utilities to prevent incidents Assist with machine cleaning and minor repairs as needed Complete daily equipment logs and inspection reports Follow all safety protocols and wear required PPE Assist with other site tasks when equipment is not in operation Perform additional duties as assigned Qualifications 2+ years of experience operating milling machines or other heavy equipment Must be at least 18 years of age Familiarity with grade control systems and milling machine adjustments Ability to read grade stakes, plans, and work orders Solid mechanical aptitude for troubleshooting minor equipment issues Strong communication skills and the ability to work effectively with the crew Valid driver's license required; CDL preferred Ability to work long hours, including weekends and evenings, as needed Must be willing to travel overnight when projects are outside the local area Work Environment Outdoor work in varying weather conditions, including heat and inclement weather Exposure to noise, dust, vibration, and moving equipment Requires standing, walking, climbing, and lifting up to 75 lbs To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: (Each to have one of the following based on the position: Never, Rarely, Occasionally, Constantly) Remaining in a stationary position, often standing or sitting for prolonged periods: Constantly Moving about to accomplish tasks at a worksite or moving from one worksite to another: Constantly Moving self in different positions to accomplish tasks in various environments, such as stooping, kneeling, or crouching: Constantly Adjusting, moving and lifting objects in all directions: Constantly Talking and hearing to communicate with others: Constantly Seeing to perform job duties at close range, such as monitors or screens: Constantly Seeing to perform job duties at a distance, such as driving or operating equipment: Constantly Repeating motions that may include the wrists, hands and/or fingers: Constantly Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like: Occasionally Operating machinery and/or power tools: Constantly Operating motor vehicles or heavy equipment: Occasionally The ability to travel regionally or nationally: Rarely Physical Demands: Sedentary work that primarily involves sitting/standing: Standing Light work that includes moving objects up to 20 pounds: Occasionally Medium work that includes moving objects up to 50 pounds: Constantly Heavy work that includes moving objects up to 100 pounds or more: Rarely Working Conditions: Low temperatures: Occasionally High temperatures: Constantly Outdoor elements such as precipitation and wind: Constantly Noisy environments: Constantly Hazardous conditions: Constantly Shift work, to include overnight work: Occasionally Frequent overtime, including weekends: Constantly Office environment: Rarely Pave America and it's companies offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. We are an Equal Opportunity Employer and comply with OFCCP regulations. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Pave America and it's companies promote a drug-free workplace. We will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries. In compliance with OFCCP requirements, we invite applicants to voluntarily self-identify their gender, race, and veteran status. Submission of this information is voluntary and refusal to provide it will not subject you to any adverse treatment. Advertised Max Pay Rate **(Make sure to change to Hourly if a non-exempt position)** USD $32.00/Hr. Advertised Min Pay Rate **(Make sure to change to Hourly if a non-exempt position)** USD $29.00/Hr.

Job DescriptionSalary: $40.00 - $45.00 hourly Primus Aerospace is a leading manufacturing partner to aerospace, defense & space OEMs / Primes & Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts; machined out of standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed, Northrop) to provide components to mission critical civilian and defense programs. Job Purpose: The CNC Programmer works to meet established standards of productivity and quality and will serve as a CNC Programmer for all jobs completed within the work cell. CNC Programmer Key Responsibilities and Accountabilities: Managing the daily production activities for assigned team, including machine programming for 3, 4 and 5 Axis Mills and CNC Lathes depending on team Complete ownership over assigned equipment as well as the teams daily job functions, responsibilities, fixtures, work instructions, team development, work flow and priorities Team members may include set-up machinists, operators and deburr staff Holding oneself and team accountable to company metrics and policies Must be able to work collaboratively and safely in a lean environment with cross-functional teams and varying levels of experience, including but not limited to Engineering, Quality, Production, Deburr and Project Managers Must be able to maintain professional demeanor while you positively inspire, influence, mentor and promote a safe, positive, engaging work atmosphere built on trust and teamwork Must be able to identify training needs, tooling recommendations, fixture design and implement best machining practices Must have solid understanding of quality standards and GD&T as it applies in an aerospace & defense environment Time management, team building, detail oriented and accurate execution of the CNC Mill / Lathe programming for both NPI and legacy repeat work. Maintain or improve legacy part quality standards and cycle times with process improvements in accordance with customer and company manufacturing standards, delivery commitments, internal procedures, and protocols Requirements Minimum of five (5) years of experience programming CNC Mills or CNC Lathes Thorough knowledge of Geometric Dimensioning and Tolerancing (GD&T) Thorough knowledge of print reading and mathematics Strong work ethic We offer comprehensive benefits including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

Controls Specialist - Townson, MD - HVAC Mechanical & Controls Company Controls Specialist RESPONSIBILITIES: Program custom applications from scratch or prepackaged libraries Communicate effectively with technicians and PMs in the field Create controls databases from scratch Familiar with BAS communication protocols, specifically BACnet, LON, or LonBus Strong troubleshooting skills to resolve any issues within systems Manage programs from start to finish and ensure they cover all requirements Responsible for startups and commissioning on BAS Systems Understanding of creating graphics Acute knowledge of HVAC systems and their integration within controls COMPANY INFO: Founded over 50 years ago Clients include Commercial, Multifamily, Restaurants, Assisted Living, Nursing Homes, Churches, Education. Mix of New Construction, Retrofit, and Service Work/Services: HVAC, Building Automation, Energy Management Systems/ATC, Plumbing, and Electrical OFFERED Fantastic Medical and Dental Benefits Company Vehicle Excellent Retirement Plan Competitive Compensation Generous Vacation and Holiday time

About Us: BW Papersystems, part of the Barry-Wehmiller Group, builds capital equipment that transforms paper into products for consumers - every day, around the world. We offer innovative technologies, service and parts, and years of global experience in corrugating, finishing; slitting and packaging; stationery; bookbinding and security documents. Customers rely on our machines to produce and convert items such as corrugated boxes, folding cartons, passports, notebooks, copy paper, board, and coated and other specialty papers. For more information, visit bwpapersystems.com. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: BW Papersystems is seeking a CNC Machinist to join our team! BW Papersystems is searching for a CNC Machinist that can perform a range of rough and finish turning, drilling, tapping, boring, facing, recessing, thread cutting and similar machining operations on a variety of shafts, housings heads, and parts of various ferrous and non-ferrous metals and alloys. In this role you will machine parts to specifications using manual and CNC machine tools such as mills, lathes, saws, and grinders. Key Responsibilities: Select the appropriate tools, machines, and materials to be used in preparation of machinery work. Perform a range of rough and finish turning, drilling, tapping, boring, facing, recessing, thread cutting and similar machining operations on a variety of shafts, housings, heads, and parts of various ferrous and non-ferrous metals and alloys. Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines. Use GD&T principles to interpret and analyze blueprints, schematics, and technical drawings to ensure accurate implementation of standard processes. Use mathematical knowledge to calculate location and positioning of features. Edit programs, set up, adjust, and operate basic machine tools, and many specialized or advanced machine tools to perform precision machining operations. Monitor the feed and speed of machines during the machining process and perform quality control checks of critical features. Measure, examine, and test completed units to detect defects and ensure conformance to specifications using precision instruments like micrometers, dial bore gauges, and calipers. Maintain clean and orderly work areas and equipment, report and correct and unsafe work practices or conditions immediately. Perform all work in accordance with established safety procedures. Multi-task various duties throughout the day; maintain a positive attitude with versatility and flexibility. Communicate and interact with various teams and teammates to solve problems independently. Basic Qualifications & Requirements: High School Diploma or GED equivalent 2+ years of experience working in a machine shop environment. The approximate pay range for this position is $23/HR - $30/HR. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. #LI-JK2 At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: BW Papersystems

Job Description Netzer Metalworks is currently hiring CNC programmers Medical and Dental Benefits, 401k, Paid Holidays Climate controlled facility. 5 years + experience recommended. MasterCAM experience a plus, however training is available - Read and interpret blueprints, sketches, and engineering specifications - Assist operators and setup personnel when necessary - High school diploma or equivalent - Minimum of 2 years of experience as a CNC programmer in a manufacturing environment - Strong knowledge of techniques, tooling, and materials - Ability to communicate and train as needed - Perform other duties as assigned to maintain efficiency throughout the company. - Ability to use Standard measuring Equipment i.e. Micrometers, Calipers, Height Gauges Powered by JazzHR SkRKjzHcNo

In this role you will operate, clean, and maintain various machining equipment including lathes, mills, 3\-axis machines, 5\-axis machines and other equipment to make precise parts, ensure efficient operations, and achieve high utilization. At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. This position is for B shift hours are 3pm\- 11pm. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout\/tagout when necessary. Utilizes work instructions, set\-up sheets and method documents to correctly operate machines and inspect machined parts. Reads and interprets all drawings, including geometric dimensioning and tolerancing. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Follows instruction from a traveler\/router and machining procedures to perform the machining process. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Ability to read and understand sketches, blueprints and thorough understanding of tools and proper use of fixtures. May set up, or learn to set up, and run CNC or manual machinery. Adjust controls to vary the depth of cut, RPM and rate of feed efficiently. Updates inventory systems for usage and scrap and prepares Material Tags for non\-conforming parts. Capable of following detailed manufacturing processes to produce high\-tolerance parts. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. Requirements Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self\-motivated and able to complete tasks with minimal supervision Ability to work on cross\-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous experience in machining and with quality processes is desired Some exposure and experience with manufacturing \/CNC machining processes Understand continuous improvement or lean \/ six sigma principles Graduate of related two\-year vocational school program and three years related work experience and\/or training; or equivalent combination of education and experience Eligible to work in the United States without company sponsorship WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all\-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at\-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at\-will status of the employee. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"667294733","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Glen Burnie"},{"field Label":"State\/Province","uitype":1,"value":"Maryland"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"21060"},{"field Label":"Salary","uitype":1,"value":"23.00"}],"header Name":"CNC Machinist II\-B Shift","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:18758749","is JobBoard":"false","user Id":"4**********1692017","attach Arr":[],"awli ApiKey":"86ezhi1yg2oktx","custom Template":"3","awli HashKey":"c21b16e3c8dbe9654eb55b1f04069e03d572626405c07f472ea90a39cdba9a8**********8097028c357acddf7e325374edf16ca 4013eb8708eaa9f0dbef6a35","is CandidateLoginEnabled":true,"job Id":"4**********5078885","FontSize":"12","google IndexUrl":"https:\/\/lucasjamestalent.zohorecruit.com\/recruit\/ViewJob.na?digest=Nyi9VFWIsbMXNaN0qju4ExnqFgCWB6snf.Rr8WJbtro\-&embedsource=Google","location":"Glen Burnie","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"pcy573a2da6bcad414975813a806bd9435355"}

The Machinist is responsible for preparing, setting up, and operating CNC machining equipment to manufacture high-precision components in accordance with technical drawings and documented specifications.Responsibilities Set up and operate 4-axis and/or 5-axis CNC milling machines Interpret mechanical drawings, blueprints, and technical specifications Apply Geometric Dimensioning and Tolerancing (GD&T) to verify dimensional accuracy Perform in-process inspections and routine quality checks to ensure compliance with requirements Maintain a safe, organized, and efficient work area Work independently while contributing effectively to production schedules and objectives Qualifications Proven experience operating 4-axis and/or 5-axis CNC milling machines Proficiency in tool identification, setup, and presetting Working knowledge of CNC G-code with the ability to review and modify programs as needed Ability to read and interpret engineering drawings and technical documentation Solid understanding of GD&T principles Strong attention to detail with a focus on quality and accuracy Experience in high-precision machining environments Ability to transition quickly into production with minimal supervision or training $32 - $40 an hour#LAT

Steeped in a tradition of hydropower, American Hydro is the leading supplier and installer of large equipment for the hydroelectric industry. Currently, American Hydro is looking for a CNC Machinist to join the family at our York, PA facility. We're a tight-knit group that takes great pride in what we produce. If you are a detail-oriented, hardworking team member who is looking for a place to call home, we invite you to apply for this opening. Job Description The CNC machinist is responsible for rough and finish machining of production ports. NC programs and controller use. Work piece and machine set-up. Machinists are responsible to make sure their machines are working at full capacity, well-maintained and perform period checks on output. The Machinist must look at the product to ensure that it is ready for the next step in the production process. Key Responsibilities: Fully proficient in blueprint reading and understanding of geometric tolerancing Able to make complex component set ups on VBM's Able to write and edit programs for VBM's Able to make complex components set ups on HBM's Keep Supervisor informed of problems regarding work piece, schedule, safety, etc. as they arise Able to write and edit programs for HBM's Cleans up sweepings of machine tool operation scrap and collects in scrap/trash bins Able to set up feeds, speeds and judge cutter/insert condition to optimize machining operation for meeting surface finish and productivity operate overhead cranes and forklift trucks Qualifications Education and/or Experience: High school diploma or general education degree (GED) and four years of related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Compensation range: $26-31 hr. based on experience/$2 hr. shift differential Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: health coverage for you and your family through medical, dental and vision plans a 401(k) plan in with a generous company match financial protection through disability, life, and accidental death & dismemberment insurance plans tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

The Machinist & Maintenance Tech will be the operator of automatic CNC spring machines to fabricate springs from steel wire and will hand assembly of more complex components. The Machinist & Maintenance Tech will also work with maintenance leader on upkeep and repairs of production and facility equipment. This Job will be support for both production and maintenance and will flex between each area as needed. Essential job Description: Reviews blueprints to determine setup procedures to follow, machine attachments required and stock to use or obtain details from setup charts. Selects machine attachments, such as taper cams, wire size block, coiling point, pitch tool and cutting tool according to a blueprint or setup chart and installs them on the machine. Ability to use gauges, load testers, micrometers, and calipers to adjust the machine to attain specified tolerances. Understands blueprints and is able to use a variety of precision measuring devices. Perform preventative maintenance and skilled repairs on production and facility equipment. Troubleshoots and diagnoses equipment problems. Complying with all corporate policies and the Occupational Safety and health administration rules (OSHA) while carrying out maintenance functions. Skills and Abilities: Ability to read and interpret part specifications or blueprints. Detail-oriented. Good verbal and communication skills. Education and Experience: High School Diploma 1-2 years experience in and/or equivalent machine operation and setup or 1-2 years working in facility or plant maintenance. Physical Requirements: May lift and carry up to 30 lbs. Standing may be 4 hours straight per day. Ability to ascend and descend ladders. Pushing and pulling required throughout the day (Hand trucks and Dollies) Benefits: Medical Dental Vision Short Term Disability Long Term Disability PTO Paid Holidays Paid Sick Days 401K / 401K Company Match Life Insurance Paid Jury Duty Employee Referral Program Tuition Reimbursement Program based on job. Employee Assistance Program Salary Range: $25.00 - $32.00/Hour based on experience EEOC Statement: MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Visit us at ************** for more information about MW Industries, Inc., and our affiliate companies.

Key Responsibilities Set up and operate 4-axis and/or 5-axis CNC milling machines Read and interpret mechanical drawings and specifications Apply GD&T to ensure parts meet tolerance requirements Perform in-process inspections and basic quality checks Maintain a clean and safe work environment Work independently and contribute immediately to production needs