Operations engineer jobs in Jacksonville, FL

The candidate will be responsible for the design of mechanical, plumbing and utility systems for industrial food processing facilities. The primary applications include steam, compressed air, chilled water, hot water, domestic water, HVAC/Refrigeration, natural gas, plumbing and other process-related systems. Required skills include HVAC heat load calculations (knowledge of HVAC load calculation software) and diversities, industrial ventilation design, equipment specification, selections and alternatives, controls and sequencing of operations, pressurization and hygienic zoning, knowledge of current industry refrigerant regulations, etc. It is assumed the candidate can design such systems with limited direction, can mentor others, and be capable of supervising the work of other engineers and designers while serving as the lead engineer on any given project. The candidate must have a working knowledge of the International Mechanical Code, International Energy Code, International Plumbing Code, International Fuel Gas Code, ASHRAE Standards, LEED, specification writing, etc. The candidate will be responsible for man-hour estimating, conceptual development, detailed design, calculations, construction level documents, written specifications, responding to RFIs, shop drawings and submittal review, site inspection visits, and oversight of Revit production resources and record drawings. The role at times may require independent work or the need to manage team members assigned to their projects, while ensuring project requirements, schedule, and overall document quality are met. Inter-discipline coordination, BIM clash detection, shop drawing review, and site inspections will be required. The candidate must be a team player and committed to the quality of work generated. - A minimum of 15 years of mechanical, plumbing and utility systems design experience. - Revit MEP experience highly preferred. - A Professional Engineering license, in good standing, is required in a minimum of (1) one state. NCEES registration is preferred. - 10% travel required. - Additional tenure/experience may warrant advanced title/compensation. - Preference will be given to candidates willing to relocate to our Jacksonville HQ, or to one of our regional office locations, which include Stevens Point, WI, and Boulder, CO.

Who is IC? Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. We are looking to hire a Project Engineer to join our growing office in Jacksonville, FL. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner's approach to projects through the company's work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Engineer, your key responsibilities are to assist the project manager and/or superintendent in one or more aspects of a construction project. Coordination with Subs, vendors, suppliers, and Independence Construction project team. Administer and monitor compliance with construction contracts with Owners, subcontractors and vendors. Coordinate and expedite materials and services for the job site, in conjunction with superintendent. Schedule and manage meetings throughout each phase of construction and preconstruction. Assist the PM with the management of Project Budget, Budget Revisions, Cost Projections, and Cash Flow Projections. Assist with the generation of reports. Review and coordinate structural, architectural and MEP drawings throughout the project. Assist PM in the oversight and management of change management processes. Collect and analyze the trade contractor proposal for scope changes. Review and negotiate the cost for the change in scope to ensure the pricing is accurate and fair for the change in work. Log the change management to the correct cost codes. Issue the subcontract change order upon approval of the change by Owner and PM. Responsible for the entire RFI process (initiate, review the response, maintain a log and distribute to team as appropriate. Responsible for the entire submittal process (initiate, review the submittal, maintain a log and distribute to team as appropriate upon approvals. Responsible to keep accurate and current at all times the drawing log, submittal log, and RFI log. Coordinate all project meetings with PM and Superintendent prior to the start of project. Attend Owner / Architect / CM (Contractor) meetings. Collect, review and process subcontractor payment applications as assigned by the PM. Assist in compiling owner payment applications. Assist the Superintendent and PM as requested in creating and updating the Master Schedule. Quality Control and Quality Assurance - Work with the team (PM, PX, Supt.) for the development of the project QA/QC program. Assist PM and Superintendent with Close-out process. Assist with the preliminary punch list process. Coordinate owner-requested warranty requirements during the warranty period. Do you have what it takes? Bachelor's degree in construction management or engineering or equivalent combination of education and experience. 2-5 years of previous related experience is required Strong written and oral communication skills. Knowledge of budgeting and expense control. Able to write reports, and business correspondence. Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines. Able to perform duties independently. Computer skills: Microsoft Office applications. Strong attention to detail.

Full Time • Exempt • Based in Jacksonville, FL $60k to $70k Join a team built on residential craftsmanship standards combined with commercial building expertise. You'll support mid-size commercial and multifamily projects from precon through closeout - collaborating closely with architects, clients, subcontractors, and internal teams. Your contribution ensures projects are delivered with integrity, attention to detail, and safety at the forefront. This role is perfect for someone who loves the hands‑on side of construction but aspires to build toward project leadership. You'll work shoulder‑to‑shoulder with field and office staff, bridging the gap between plan sets and finished product. What You'll Do Manage RFIs, submittals, schedule updates, and project documentation. Ensure timely delivery of materials and monitor vendor coordination. Collaborate daily with subcontractors, architects, and trades to meet quality standards. Support preparation of change orders, subcontracts, and monthly pay applications. Assist superintendent teams with site coordination and weekly planning. Engage with preconstruction and estimating when workload allows. Help lead project closeout: as‑builts, manuals, warranties, and final punch‑list completion. Promote safety, quality, and compliance across all phases. Proactively identify project challenges and help the team resolve them efficiently. What You Bring Degree in construction management, engineering, or relevant field - or equivalent experience. 0-1 year of industry experience (internships count). Exceptional communicator, organized, and comfortable managing multiple priorities. Proficient with Microsoft Office; familiarity with Procore, Bluebeam or On‑Screen Takeoff is preferred. A collaborative mindset, strong work ethic, and eagerness to learn. What You'll Gain Real hands-on experience learning from experienced builders who bring residential quality into commercial projects. Opportunity to grow into a Project Manager role by tackling meaningful responsibilities from day one. Connection to a team that values craftsmanship, honesty, teamwork, and long‑term community impact. Medical/Dental/Vision benefits (effective soon after start) PTO + paid holidays 401(k) with employer match (up to 4%) Profit - sharing potential At Framework, we keep it simple: we connect great people with great builders. We're not just filling seats - we're helping construction professionals find real opportunities with companies that value what they bring to the table. Our candidates trust us because we're honest, we follow through, and we never push roles that aren't the right fit. We take the time to understand where you're coming from and where you want to go. On the flip side, our clients count on us to bring high-quality people who are the real deal - both in skill and character. They'll tell you we just get it. We're proud to be the kind of recruiters who do what's right, not what's easy, and we make sure it's a win for everyone involved.

About LSI LSI is an employee-owned company that employs dynamic teams of professionals - people with the finest technical expertise, a level of passionate creativity, and a truly visionary outlook who deliver innovative training solutions that exceed our customers' expectations. Everyone at LSI has a personal stake in our success. LSI has over 400 training support experts, engineers, and craftsmen on staff who develop state-of-the-art high-fidelity training devices, complex computer-based, highly interactive distributed learning products, and comprehensive, dynamic technical publications. LSI employee-owners collaborate to deliver training products and services for a myriad of programs and customers, using leading-edge technology and proven processes. Mission Our mission is to prepare our military and allies to be battle-ready through cutting-edge training products and services. Vision Our vision is to be the premier provider of military training solutions, renowned for our innovation and excellence. Through employee-ownership and teamwork, we will shape a future where every military service member is equipped to succeed in their mission. Guiding Principles ESOP Sustainability: We do everything within our control to meet project budgets and schedules, so our ESOP prospers. Take Ownership: Each Employee-Owner takes ownership at the individual level for their words, actions, and results. Individual ownership breeds accountability. Accountability breeds trust. When we hold ourselves accountable and trust our fellow employee-owners to do the same, we realize success. Clear Communication: We project confidence in our communication by using unambiguous language and providing clear purpose and direction. Pursuit of Excellence: We aggressively pursue continuous improvement both as teams and individual employee-owners. We strive to get better every day. There is no room for mediocrity. Pride in Our Work: We know the value of our work and are proud of what we produce. Customer Focus: Customers are both internal and external, and we strive to give both our best efforts. Assume Positive Intent: Assume others are well-intentioned in their actions and seek additional information about the circumstances to help solve problems. Assuming positive intent in all interactions is the key to building strong teams and working together to solve problems. One Voice: Every Employee-Owner is expected to speak up if they have an idea for improvement or if they disagree with a potential course of action. Once a decision is made, the entire team commits to it and moves forward with one voice. Apply: ******************************* Summary: The Mechanical Engineer II is a mid-level position that performs and assists in full lifecycle product development. Also assists in the creation of production drawings, checking designs to ensure they meet requirements set by customers and our own internal standards, as well as provides technical guidance to manufacturing. Essential Job Functions: * Perform and assist in full lifecycle product development (design, develop, test prototypes, manufacture, and implement). * Design systems and components that meet needs and requirements and ensure all designs meet both internal and external customer requirements and design standards. * Conduct experiments methodically, analyze data, and interpret results. * Test and evaluate theoretical designs. * Evaluate the final product's overall performance, reliability, and safety. * Alter and modify the design to meet requirements and to eliminate malfunctions. * Prepare product reports and documentation. * Troubleshoot mechanical discrepancies on trainers and/or aircraft as required. * Assist in creating production drawings for machined parts, sheet metal fabrication, and mechanical sub-assemblies. * Work with program management to develop cost and schedule baselines and targets. * Assist in the development of process improvement programs to reduce development time, improve product quality and manufacturability and reduce product cost. * May coordinate the efforts of drafters, technical writers, engineering technicians, and machine shop personnel as required. * Provide leadership and technical guidance to mechanics, technicians, and drafters. * Recommend design approaches to meet production requirements for new or improved products or processes. * Conduct design reviews with manufacturing and other applicable disciplines. * Must be capable of safely handling government-furnished equipment and materials. * Must be available to work a standard weekly schedule with overtime as required. * Perform other duties as assigned. Job Requirements Knowledge, Skills, and Abilities: * Must have a working knowledge of AutoCAD and Solid Works. * Must have knowledge of ASME Yl4.100-2000 & Yl4.5-1994 drawings. * Working experience with product Data Management (PDM), Product Lifecycle Management (PLM), and Finite Element Analysis (FEA). * Solid understanding of core concepts, including mechanics, kinematics, thermodynamics, materials science, etc. * Must have knowledge of various fabrication and assembly, including metal machining, sheet metal fabrication, and welding. * Knowledge of industry and military specifications for materials, parts, and processes preferred. * Must have creativity, innovation, commitment to excellence, with the ability to work in a diverse and fast-paced environment. * Must work well in a team environment. * Must be able to travel. * Must be able to obtain security clearance if required by the contract. Education and Experience: * Bachelor's degree in Mechanical Engineering or Bachelor of Science in Engineering, Engineering Technology, or Aerospace Engineering with applicable specialty (i.e., mechanical or design.) * Two (2) years applicable mechanical engineer in experience. * Prior military with aviation maintenance experience a plus. * Working knowledge of 3D scanning equipment and 3D printing a plus. * Experience with Microsoft Office Suite, including Word, Excel, PowerPoint, and Project required. Equal Opportunity Employer including Disability/Vets.

Job Title Operating Engineer Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties * Perform all plumbing, electrical, or HVAC requirements of the building(s) * Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. * Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings * Verify field conditions and perform any necessary repairs or adjustments * Monitor Energy Management * Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property * Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.) * Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. * Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris * Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management * Document and report activities to supervisor * Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns * Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits * Complete all required C&W Safety Training as scheduled annually * Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours KEY COMPETENCIES * Technical Proficiency * Initiative * Flexibility * Multi-Tasking * Sense of Urgency IMPORTANT EDUCATION * High School Diploma of GED Equivalent * Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE * 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting ADDITIONAL ELIGIBILITY QUALIFICATIONS * Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) * May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements * Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable) * Basic Computing Skills in Outlook, Excel & Word * Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. * Knowledgeable in energy management systems, techniques and operations. * Thorough knowledge in all building systems operations, maintenance and repair. May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties WORK ENVIRONMENT This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices * Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine * Involves movement between departments, floors, and properties to facilitate work * Ability to speak clearly so others can understand you * Ability to read and understand information presented orally and in writing * Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics AAP/EEO STATEMENT C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated. OTHER DUTIES This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. #INDSkilledTrades Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $28.90 - $34.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: "Cushman & Wakefield"

General Function The purpose of this position is to assist with the maintenance and operations of all mechanical equipment, building related systems, and routine general maintenance of multiple buildings. This position works closely with the Facilities Manager and Property Management staff in all areas of building operations. This position is for a high profile building with a government entity as a tenant, and the ability to pass a stringent background check is required. Essential Functions Perform preventative maintenance and corrective repair of buildings, major systems, equipment and grounds. Perform unscheduled maintenance calls, including routine plumbing emergencies, minor equipment malfunctions, hot/cold calls, electrical and lighting repairs, and minor structural repairs (ceiling, ceramic/vinyl tile, flooring, doors, etc.) Maintain records on all building equipment and report abnormalities to manager. Assist in routine monitoring of service contractors. Responsible for changing ceiling tiles, light bulbs, filters, ballasts, etc. Respond to emergency calls after hours on a rotating basis. Proactively conduct tours to look for deficiencies and coordinate/initiate repairs. (Such as stained ceiling tiles, slamming doors, broken restroom equipment, etc.) Promote and maintain a safe work environment. Perform other duties as required. Property specific functions (as necessary) A strong understanding of the Fire Alarm panel and its functions. Requirements Qualifications and Competencies Experience in plumbing repairs and troubleshooting. Experience in electrical repair, installation, and trouble shooting. General building mechanical maintenance experience. Knowledge of and experience in mechanical concepts, HVAC principles, basic electrical, and basic plumbing. Evidence of mechanical aptitude. Excellent customer service skills. Good verbal and written communication skills. Ability to prioritize work and to be a self-starter as well as a motivated team player. Valid driver's license and satisfactory driving record. Working knowledge of hand and power tool operation and safety. Ability to lift 50 to 100 pounds. Ability to climb ladders. Ability to pass a drug screen and criminal background check Requirements: PI176b94ad94f1-31181-37874365

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. **Northrop Grumman Aeronautics Systems (NGAS)** sector is looking for a **Staff Structural Liaison Engineer (T05)** with **Material Review Board (MRB)** experience to join our team of qualified, diverse individuals. This position will be located onsite at our **St. Augustine, FL** production facility with a **4x10 work schedule** (10-hour workdays Monday - Thursday with every Friday off; Tuesday - Friday may also be an option). In this role, under the guidance and supervision of higher-level engineers, you will develop, design and analyze MRB repair dispositions for discrepancies in aircraft primary and secondary structure and mechanical systems resulting from manufacturing, design, or tooling errors. **Responsibilities include:** + Participating in corrective action investigations of engineering caused non-conformances and generate any required corrective engineering documentation including Engineering Orders and Direct Drawing Changes + Performing basic structural analysis to substantiate repair dispositions with concurrence from the stress department + Interfacing with Quality, Material, and Manufacturing departments when developing repair solutions or corrective action **Basic Qualifications:** + **Staff Engineer:** Bachelor of Science (BS) degree in a STEM discipline with 12 years of related experience; OR a Master of Science (MS) degree in a STEM discipline with 10 years of related experience + Experience with the MRB process + Knowledge of or experience with aircraft technology and airframe primary and secondary structures + Experience with 3-D CAD Design tools (i.e., Siemens NX, Unigraphics, Catia V4/V5) + Able to perform basic structural analysis to substantiate repairs/designs + Must have the ability to obtain and maintain a DoD Secret clearance. **Preferred Qualifications:** + Degree in Mechanical or Aerospace Engineering + Experience with electrical repairs + Familiarity with Teamcenter product lifecycle and model management system + Familiarity with Manufacturing Execution System (MES) + Current Secret clearance + Mechanical systems and troubleshooting experience. + Knowledge of hydraulics, pneumatics, fuel, flight control, landing gear, propulsion systems. + Flight line experience and ability to determine safety of flight. + E-2 aircraft experience + MRB signature authority Primary Level Salary Range: $147,700.00 - $221,500.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

US East Office (Jacksonville, FL) We exist to Transform our Customers and Change Lives. Summary: We are looking for a seasoned DevOps professional who will work cross-functionally to help implement and operationalize some of the most advanced cloud architectures running on AWS. The DevOps Engineer will demonstrate technical depth, strong interpersonal skills, and a passion to solve complex business problems. The Cloud Operations Engineer role is an important supporting role for the global 24/7 SaaS Operations group. Candidates will have a chance to work in a dynamic environment across several product lines as well as administer technical solutions in hosted data centers and the cloud. You will be working in a "SaaS Operations” production environment as part of a 24/7 team that requires high personal accountability, and a readiness to provide support, should any critical issue arise. You will work alongside engineering teams to implement solutions for infrastructure and POCs, deliver technical expertise, and establish best practices. You will be working with a team of highly skilled professionals to provide fast support for the company's products, fulfill day-to-day requests, automate tasks, and participate in both small and large engineering projects. Essential Duties and Responsibilities: Support highly available 24/7 production SaaS applications by monitoring, diagnosing, and resolving issues, configuring, and installing custom-developed and third-party applications, primarily within AWS Write and maintain custom automation to increase system efficiency, quality, and reduce human intervention on any task Work closely with the Development team during the application development process Work with team members on project tasks derived from release requirements Identify and recommend options for improving performance, maintainability, and operability Participate in the engineering, planning, upgrade, and maintenance of the hosted Infrastructure Education and Experience: A great attitude and drive to produce high-quality work Professional, responsive, and able to exercise sound judgment Ability to deliver high-quality with extreme attention to detail A minimum of 7 years of IT experience Skilled in scripting and automation (PowerShell, Unix Shell, Python) Experience with configuration management solutions (Packer, EC2 Builder, Jenkins) Skilled in troubleshooting issues throughout the entire infrastructure stack Strong experience with web application technologies (IIS, Node.js) Excellent understanding of server operating systems (Windows, Linux) Proficiency with database technologies (MySQL, Aurora, DynamoDB, Elasticsearch, Redis) Solid understanding of proper communication and collaboration involving changes, issues, and process Experience working in an environment where availability, scalability, security, compliance, process, change management, and documentation are operating imperatives (SOC2) An eagerness to learn enough about whatever tools or tricks are needed to get the job done Employer does not sponsor applicants for employment visa status (e.g., H-1B visa status). General Information: The above noted job description is not intended to be an exhaustive list of all duties and responsibilities that may be assigned, but rather to give personnel so classified a general sense of the responsibilities and expectations of the job. As the nature of business demands change so, too, may the essential functions of this specific position and/or the skills and abilities required. RF-SMART is an Equal Employment Opportunity (EEO) employer.

Coke Florida is looking for a Facilities Building Engineer to work out of our Jacksonville area facilities. Working Monday through Friday with occasional night and weekend work from 8:00 AM to 5:00 PM. What You Will Do: Responsible for maintaining, troubleshooting, and repairing, or arranging for repairs of all building operating systems on the site. May be assigned to a single building as the sole engineer under a limited property size and scope. Must have reliable transportation and be available for after hour emergency calls. Roles and Responsibilities: Responsible for all preventative maintenance, necessary maintenance and repairs to the buildings mechanical, electrical, HVAC and plumbing systems. Must be familiar with the location and have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, fire protection and security systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Conduct periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to; air handling units (including both rooftop and built-up units), re-circulating air systems, water pumping systems, cooling plant and all plumbing system components. Also, conduct general building maintenance, as needed. Be responsive to tenant requests in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems. Prepare and maintain maintenance logs and records. Familiarity with preventative maintenance and work order software systems. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor. Maintain log of work order details. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site. Be familiar with and conform to all written operating procedures associated with the site. Assist in snow and ice clearing operations, including the coordination of plowing and salting activities by outside vendors. Maintain organized building files. May perform other duties as assigned For this role, you will need: High School Diploma. Minimum of 5 years previous building operations engineering experience. Must be CFC certified in high pressure discipline. Ability to handle multiple projects and make decisions. Proficient computer and e-mail skills. Holds any necessary/required licenses.

Job Title: Facility Engineer Department: Facilities Management The Facility Engineer is responsible for supporting the design, maintenance, and improvement of building infrastructure, including HVAC systems, control systems, and facility operations. This role involves providing technical assistance in planning and managing building projects, ensuring compliance with safety regulations, and optimizing facility operations. The Facility Engineer will report to the Assistant Facilities Manager and collaborate with cross-functional teams to maintain and enhance facility performance. Job Duties & Responsibilities: * Report to the Assistant Facilities Manager and assist in duties of senior engineers and project managers as required. * Provide expertise on building HVAC system design, control systems, operations, and maintenance. * Offer technical assistance in developing, planning, and managing building design and construction projects. * Prepare facility project plans, preliminary designs, and cost estimates under guidance. * Assist in reviewing drawings, specifications, and procedures for accuracy and compliance. * Conduct construction inspections to ensure conformance to requirements. * Support project documentation, including scope-of-work, purchase requisitions, and cost tracking. * Assist in project scheduling, budget tracking, and process improvements. * Manage smaller-scale construction projects, office layouts, and furniture/equipment relocations. * Oversee and supervise junior team members as needed. * Ensure compliance with all safety regulations and workplace best practices. * Perform additional duties as assigned by management. Key Requirements & Competencies: Education & Experience: * Bachelor's degree in Engineering or a related field. * Minimum of 3 years of relevant experience or an equivalent combination of education and experience. Technical Skills: * Proficiency in Microsoft Outlook, Word, Excel, PowerPoint, and Microsoft Project. * Experience with AutoCAD or SolidWorks is a plus. * Strong knowledge of project planning, cost estimation, and construction processes. Soft Skills: * Excellent organizational and time management skills. * Strong verbal, written, and presentation communication skills. * Ability to collaborate with cross-functional teams and manage projects effectively. * Strong analytical and problem-solving abilities. Physical Requirements & Work Environment: * Work involves a combination of indoor and outdoor activities in varying conditions (hot, cold, wet, humid). * Tasks may require standing, walking, climbing ladders/stairs, balancing, bending, kneeling, and lifting up to 50 pounds. * Operation of material handling equipment (forklift, hoist, cranes, etc.) may be required. * Use of personal protective equipment (PPE), including safety glasses, steel-toed shoes, gloves, and hard hats, is necessary. * Travel between company locations may be required. * Ability to work in both office and manufacturing environments. * Flexibility to work varying shifts and hours as needed. Place of Job in the Organizational Structure: * Reports to the Assistant Facilities Manager. * Works closely with senior engineers, project managers, and cross-functional teams. * May oversee or guide junior employees within the Facilities Management department.

Job Title: Facility Engineer Department: Facilities Management The Facility Engineer is responsible for supporting the design, maintenance, and improvement of building infrastructure, including HVAC systems, control systems, and facility operations. This role involves providing technical assistance in planning and managing building projects, ensuring compliance with safety regulations, and optimizing facility operations. The Facility Engineer will report to the Assistant Facilities Manager and collaborate with cross-functional teams to maintain and enhance facility performance. Job Duties & Responsibilities: Report to the Assistant Facilities Manager and assist in duties of senior engineers and project managers as required. Provide expertise on building HVAC system design, control systems, operations, and maintenance. Offer technical assistance in developing, planning, and managing building design and construction projects. Prepare facility project plans, preliminary designs, and cost estimates under guidance. Assist in reviewing drawings, specifications, and procedures for accuracy and compliance. Conduct construction inspections to ensure conformance to requirements. Support project documentation, including scope-of-work, purchase requisitions, and cost tracking. Assist in project scheduling, budget tracking, and process improvements. Manage smaller-scale construction projects, office layouts, and furniture/equipment relocations. Oversee and supervise junior team members as needed. Ensure compliance with all safety regulations and workplace best practices. Perform additional duties as assigned by management. Key Requirements & Competencies: Education & Experience: Bachelor's degree in Engineering or a related field. Minimum of 3 years of relevant experience or an equivalent combination of education and experience. Technical Skills: Proficiency in Microsoft Outlook, Word, Excel, PowerPoint, and Microsoft Project. Experience with AutoCAD or SolidWorks is a plus. Strong knowledge of project planning, cost estimation, and construction processes. Soft Skills: Excellent organizational and time management skills. Strong verbal, written, and presentation communication skills. Ability to collaborate with cross-functional teams and manage projects effectively. Strong analytical and problem-solving abilities. Physical Requirements & Work Environment: Work involves a combination of indoor and outdoor activities in varying conditions (hot, cold, wet, humid). Tasks may require standing, walking, climbing ladders/stairs, balancing, bending, kneeling, and lifting up to 50 pounds. Operation of material handling equipment (forklift, hoist, cranes, etc.) may be required. Use of personal protective equipment (PPE), including safety glasses, steel-toed shoes, gloves, and hard hats, is necessary. Travel between company locations may be required. Ability to work in both office and manufacturing environments. Flexibility to work varying shifts and hours as needed. Place of Job in the Organizational Structure: Reports to the Assistant Facilities Manager . Works closely with senior engineers, project managers, and cross-functional teams. May oversee or guide junior employees within the Facilities Management department.

Our Client A fast growing standards and insurance startup based in San Francisco, they have raised 15 million dollars in funding and are reinventing how enterprises adopt AI agents. Their two pronged model, which includes creating the industry's first AI agent standard and pairing it with bespoke insurance coverage, gives AI companies a trusted pathway to certify their agents and reduces enterprise risk. By helping AI vendors earn credible certification and providing insurance protection against failures such as hallucinations, data leaks, or control breakdowns, they enable enterprise buyers to deploy AI with confidence rather than fear. With deep expertise in AI risk, insurance, and standards, they are building the essential “confidence infrastructure” that will support safe AI scale up. About Us Catalyst Labs is a leading talent agency with a specialized vertical in Applied AI, Machine Learning, and Data Science. We stand out as an agency that's deeply embedded in our clients' recruitment operations. We collaborate directly with Founders, CTOs, and Heads of AI in those themes who are driving the next wave of applied intelligence from model optimization to productized AI workflows. We take pride in facilitating conversations that align with your technical expertise, creative problem-solving mindset, and long-term growth trajectory in the evolving world of intelligent systems. Location: San Francisco Work type: Full Time, Compensation: above market base + bonus + equity Roles & Responsibilities Lead end-to-end development of AI agent products and infrastructure, collaborating closely with the founding team. Build and scale evaluation pipelines to detect AI agent failures in deployment (e.g., hallucinations, jailbreaks, brand risks, data leakage). Design and implement the gold standard for secure, safe, and reliable AI agents. Develop and maintain full-stack systems, including backend (Python, LangChain) and frontend (React, TypeScript) components. Create monitoring tools, filters, and authorization frameworks to support AI agent builders. Work on-site in San Francisco, contributing to a fast-paced, high-agency startup environment. Ship products frequently, gather user feedback, and iterate rapidly to improve reliability and safety of AI systems. Qualifications Bachelor's degree in Computer Science, Engineering, or equivalent practical experience. 1+ years of experience as an AI Software Engineer with active coding responsibilities. Proven expertise developing AI agents and LLM-based systems (e.g., published research or work in a leading AI team). Founding or early-stage startup experience, with demonstrated ability to own end-to-end product development. Strong understanding of AI evaluation methodologies and deployment reliability standards. Excellent problem-solving and communication skills with the ability to articulate technical impact in business terms. Evidence of high agency, ownership, and execution velocity (e.g., promotions in Can work full-time on-site in San Francisco (5 days a week).

Company: Boeing Aerospace Operations $We are Boeing Global Services (BGS) Engineering team creating and implementing innovative technologies that make the impossible possible and enabling the future of aerospace. We provide engineering design and support, including aftermarket modifications, and are innovating to make product and services safety even stronger. Join us and put your passion, determination, and skill to work building the future! #TheFutureIsBuiltHere #ChangeTheWorld BGS Engineering is seeking an Associate or Mid-Level Product Review Engineer to join the KC-135 Liaison Engineering Team located at the Boeing Jacksonville, Florida. The ideal candidate will have a proven track record of applying knowledge of Engineering principles to develop innovative solutions to complex problems. Additionally, the candidate will have demonstrated the capability establishing and maintaining strong working relationships with internal and external customers, as well as strong interpersonal and communication skills (verbal, written, and presentation). Position Responsibilities: Provide on-site engineering support at the aircraft maintenance location. This includes, but not limited to the development of technical solutions, development of engineering data, and acting as a principle point of contact for internal and external customers Provide steadfast technical support around diagnosing and resolving issues encountered in the aircraft maintenance operations, on time with high quality Review defect and damage conditions; establish root cause and provide acceptable disposition instructions that are innovative, thorough and practical Participate in status meetings and technical reviews, support monthly metrics development and submittals Drive efficiency in operations by steadfast collaboration with design, manufacturing, and stress counterparts. Support trade studies, design improvements, and optimization efforts Ensure customer compliance with Boeing standards Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 2+ years of related Engineering experience Experience interpreting and using engineering drawings and specifications Experience with Product Data Management (PDM), Model Based Engineering (MBE), CATIA, ENOVIA Excellent written and verbal communication skills, and problem-solving abilities Preferred Qualifications (Desired Skills/Experience): 5+ years of related Engineering experience 2+ years of Material Review Board / Liaison Engineering (MRB / LE) Authority experience, including participating in Material Review Board 2+ years of experience with applying knowledge of design principles to assess and resolve product issues through the product lifecycle Experience interfacing with Operations and Engineering disciplines, as well as being able to work in a team environment or to work independently 2+ years of experience with developing dispositions for aircraft non-conformances 2+ years of experience with military or commercial derivative aircraft: design, analysis, manufacturing, assembly, integration, test, delivery and fleet support 2+ years of experience working in a cross-functional environment and/or business unit teams. 2+ years of customer interface experience Work effectively and cooperatively with team members, management, and other cross-departmental teams Universal Product Review certification Active U.S. Security Clearance in the past 24 months Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Relocation: This position offers relocation based on candidate eligibility. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards and Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay Range: Associate: $88,200- $107,800 Mid-Level: $104,400 - $127,600 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: R&D Product Development Job Sub Function: Biomedical Engineering Job Category: Scientific/Technology All Job Posting Locations: Jacksonville, Florida, United States of America Job Description: We are searching for the best talent to join our Vision team as a Staff Vision Engineer located in Jacksonville, Florida. Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of vision treatments? Ready to join a team that's reimagining how vision is improved? Our Vision team solves the toughest health challenges. Help combine cutting-edge insights, science, technology, and people to encourage eye care professionals and patients to proactively protect, correct and enhance healthy sight for life. Our products and services address these needs - from the pediatric to aging eye - in a patient's lifetime. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech Purpose: The Staff Vision Engineer designs, simulates, and optimizes optical systems and components used in advanced vision products, including contact lenses, ophthalmic devices, and wearable technologies, with the goal of delivering innovative solutions that improve patient vision from concept through commercialization; the role collaborates with multi-functional teams and partners with vision scientists, clinicians, and internal and external centers of excellence to translate scientific insights into practical product solutions in Presbyopia, Myopia Progression, Light Management, and Astigmatism, driving ground-breaking optical innovations and ensuring robust validation across development stages. You will: Develop a fundamental understanding of the human visual system to enable eye-inspired optical designs Develop, research, create, and validate eye and vision models Research and deploy clinical metrology instrumentation to enable clinical research Provide optics and vision science consulting across the organization as needed Optical design optimization Adhere to all environmental and safety policies and procedures and support department environmental objectives Engage in Credo-based decision making Qualifications PhD or Master's degree in Optics, Physics, Vision Science, or other degrees, such as psychophysics, with applied vision science A minimum of 2 years of work experience (5 years with Master's degree) in a multi-disciplined engineering environment with experience in physics, optics or vision science is required Experience with ophthalmic product design and visual performance measurement technology is required Demonstrated solid understanding of optical design software, Matlab (or other programming language), statistics, data analytics & mathematical modeling Demonstrated ability to integrate knowledge across diverse technologies (e.g. optical design, mechanical design, ocular physiology, image interpretation, psychophysics) to generate technical insights and translate into design solutions Excellent written, oral and interpersonal communication skills required #LI-AM2 Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson and Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, please email the Employee Health Support Center (********************************) or contact AskGS to be directed to your accommodation resource. Required Skills: Preferred Skills: Optical Design, Optics, Physical Optics, Product Design, Vision Science

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: R&D Product Development Job Sub Function: Biomedical Engineering Job Category: Scientific/Technology All Job Posting Locations: Jacksonville, Florida, United States of America Job Description: We are searching for the best talent to join our Vision team as a Staff Vision Engineer located in Jacksonville, Florida. Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of vision treatments? Ready to join a team that's reimagining how vision is improved? Our Vision team solves the toughest health challenges. Help combine cutting-edge insights, science, technology, and people to encourage eye care professionals and patients to proactively protect, correct and enhance healthy sight for life. Our products and services address these needs - from the pediatric to aging eye - in a patient's lifetime. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech Purpose: The Staff Vision Engineer designs, simulates, and optimizes optical systems and components used in advanced vision products, including contact lenses, ophthalmic devices, and wearable technologies, with the goal of delivering innovative solutions that improve patient vision from concept through commercialization; the role collaborates with multi-functional teams and partners with vision scientists, clinicians, and internal and external centers of excellence to translate scientific insights into practical product solutions in Presbyopia, Myopia Progression, Light Management, and Astigmatism, driving ground-breaking optical innovations and ensuring robust validation across development stages. You will: Develop a fundamental understanding of the human visual system to enable eye-inspired optical designs Develop, research, create, and validate eye and vision models Research and deploy clinical metrology instrumentation to enable clinical research Provide optics and vision science consulting across the organization as needed Optical design optimization Adhere to all environmental and safety policies and procedures and support department environmental objectives Engage in Credo-based decision making Qualifications PhD or Master's degree in Optics, Physics, Vision Science, or other degrees, such as psychophysics, with applied vision science A minimum of 2 years of work experience (5 years with Master's degree) in a multi-disciplined engineering environment with experience in physics, optics or vision science is required Experience with ophthalmic product design and visual performance measurement technology is required Demonstrated solid understanding of optical design software, Matlab (or other programming language), statistics, data analytics & mathematical modeling Demonstrated ability to integrate knowledge across diverse technologies (e.g. optical design, mechanical design, ocular physiology, image interpretation, psychophysics) to generate technical insights and translate into design solutions Excellent written, oral and interpersonal communication skills required #LI-AM2 Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson and Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, please email the Employee Health Support Center (********************************) or contact AskGS to be directed to your accommodation resource. Required Skills: Preferred Skills: Optical Design, Optics, Physical Optics, Product Design, Vision Science

Must Have Technical/Functional Skills We are seeking a skilled ServiceNow Developer to design, develop, and maintain ServiceNow applications and integrations. The ideal candidate will have strong technical expertise in ServiceNow scripting, workflows, and modules, along with experience in implementing ITSM processes and integrations with external systems. ________________________________________ Key Responsibilities * Develop and customize ServiceNow applications using JavaScript, GlideScript, HTML, CSS, and XML. * Configure and maintain ServiceNow modules: ITSM, CMDB, Service Catalog, Knowledge Management, Incident, Problem, Change. * Create and manage business rules, client scripts, UI policies, script includes, Flow Designer flows, and Service Portal components. * Integrate ServiceNow with external systems using REST/SOAP APIs, IntegrationHub, and manage LDAP/AD syncs. * Perform platform upgrades, patching, Instance Cloning and regression testing * Collaborate with stakeholders to gather requirements, design solutions, and deliver enhancements in Agile/SCRUM environments. * Ensure compliance with ITIL best practices, conduct code reviews, and maintain documentation. * Troubleshoot issues, optimize performance, and provide technical support. ________________________________________ Required Skills & Experience * 5+ years of hands-on ServiceNow development experience. * Proficiency in JavaScript, Glide API, HTML, CSS, XML, and ServiceNow scripting. * Strong knowledge of ServiceNow modules (ITSM, CMDB, Service Catalog, Knowledge Management). * Experience with Service Portal development, dashboards, and reporting. * Integration experience using REST/SOAP APIs and third-party tools. * Familiarity with ITIL processes and Agile methodologies. * Excellent problem-solving and communication skills. Salary Range $110,000-$120,000year TCS Employee Benefits Summary: Discretionary Annual Incentive. Comprehensive Medical Coverage: Medical & Health, Dental & Vision, Disability Planning & Insurance, Pet Insurance Plans. Family Support: Maternal & Parental Leaves. Insurance Options: Auto & Home Insurance, Identity Theft Protection. Convenience & Professional Growth: Commuter Benefits & Certification & amp; Training Reimbursement. Time Off: Vacation, Time Off, Sick Leave & Holidays. Legal & Financial Assistance: Legal Assistance, 401K Plan, Performance Bonus, College Fund, Student Loan Refinancing. #LI-SP1

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Job Title Operating Engineer Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties • Perform all plumbing, electrical, or HVAC requirements of the building(s) • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. • Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings • Verify field conditions and perform any necessary repairs or adjustments • Monitor Energy Management • Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property • Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.) • Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. • Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris • Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management • Document and report activities to supervisor • Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns • Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits • Complete all required C&W Safety Training as scheduled annually • Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours KEY COMPETENCIES • Technical Proficiency • Initiative • Flexibility • Multi-Tasking • Sense of Urgency IMPORTANT EDUCATION • High School Diploma of GED Equivalent • Graduate of apprentice program or trade school preferred IMPORTANT EXPERIENCE • 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting ADDITIONAL ELIGIBILITY QUALIFICATIONS • Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) • May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements • Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable) • Basic Computing Skills in Outlook, Excel & Word • Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. • Knowledgeable in energy management systems, techniques and operations. • Thorough knowledge in all building systems operations, maintenance and repair. May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties WORK ENVIRONMENT This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices • Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine • Involves movement between departments, floors, and properties to facilitate work • Ability to speak clearly so others can understand you • Ability to read and understand information presented orally and in writing • Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics AAP/EEO STATEMENT C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated. OTHER DUTIES This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. #INDSkilledTrades Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $28.90 - $34.00Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: “Cushman & Wakefield”

General Function The purpose of this position is to assist with the maintenance and operations of all mechanical equipment, building related systems, and routine general maintenance of multiple buildings. This position works closely with the Facilities Manager and Property Management staff in all areas of building operations. This position is for a high profile building with a government entity as a tenant, and the ability to pass a stringent background check is required. Essential Functions • Perform preventative maintenance and corrective repair of buildings, major systems, equipment and grounds. • Perform unscheduled maintenance calls, including routine plumbing emergencies, minor equipment malfunctions, hot/cold calls, electrical and lighting repairs, and minor structural repairs (ceiling, ceramic/vinyl tile, flooring, doors, etc.) • Maintain records on all building equipment and report abnormalities to manager. • Assist in routine monitoring of service contractors. • Responsible for changing ceiling tiles, light bulbs, filters, ballasts, etc. • Respond to emergency calls after hours on a rotating basis. • Proactively conduct tours to look for deficiencies and coordinate/initiate repairs. (Such as stained ceiling tiles, slamming doors, broken restroom equipment, etc.) • Promote and maintain a safe work environment. • Perform other duties as required. Property specific functions (as necessary) • A strong understanding of the Fire Alarm panel and its functions. Requirements Qualifications and Competencies Experience in plumbing repairs and troubleshooting. Experience in electrical repair, installation, and trouble shooting. General building mechanical maintenance experience. • Knowledge of and experience in mechanical concepts, HVAC principles, basic electrical, and basic plumbing. • Evidence of mechanical aptitude. • Excellent customer service skills. • Good verbal and written communication skills. • Ability to prioritize work and to be a self-starter as well as a motivated team player. • Valid driver's license and satisfactory driving record. • Working knowledge of hand and power tool operation and safety. • Ability to lift 50 to 100 pounds. • Ability to climb ladders. • Ability to pass a drug screen and criminal background check