Packaging operator jobs in Alpine, MI

Short & Sweet: The sanitation operator is responsible for the disassembly, cleaning, sanitizing and re-assembly of cheese processing equipment. Schedule: 8 hour shifts, 10:30 PM to 7:00 AM * Weekends & Holidays are scheduled often * $1.00 shift premium between 6PM and 6AM Benefits: * Medical, Vision, & Dental Insurance * 401K & Profit Sharing * Monthly Production/Safety Bonuses * Pet, legal, & other additional insurance packages available Job Responsibilities: * Inspect ribbon of cheese for softness and extraneous. * Pack cheese. * Feed ribbon stacks of cheese onto the conveyor. * Blend cheese as required. * Maintain good housekeeping at all times, including cleaning empty tubs and weighing scrap. * Observe proper safety policies and procedures at all times. * Add slip sheets/inter-leaver sheets in-between layers of cheese in tote. * Fold bags into boxes so none is exposed when the box is closed. * Monitor quality of boxes before running through the tape machine. • Dimensions operator, perform the duties per established SOP's.• Sealer operator, perform the duties per established SOP's.• Scale operator, perform the duties per established SOP's. * Box maker, perform the duties per established SOP's. * Remove all cheese prior to sanitizing equipment, separating it into rework, redice, or scrap categories. * Reassemble and make all necessary minor adjustments to all processing equipment and verify proper equipment set up. * Clean all equipment using foam or CIP and rinse thoroughly. * Disassemble all processing equipment. * Protect all electrical panels and equipment from water damage by covering them. * Comply with all safety regulations, policies and procedures. * Notify team lead/supervisor of any potential problems, hazards, broken or damaged equipment. * Organize all parts for proper and efficient cleaning. * Pre-clean all processing equipment using scrapers and air guns and water. Minimum Job Requirements: * Must be able to work in a 24/7 operation, including weekends and holidays * Must be at least 18 years or older * Must be able to communicate effectively verbally and in writing * Must be able to lift 46 lbs. from floor to shoulder (0" - 58") and climb stairs hourly Leprino uses Psychemedics for a 90-day hair follicle drug test as part of the employee pre-employment process and also participates in E-Verify. All employees in our manufacturing facilities are required to wear Personal Protective Equipment (PPE) as mandated by their role and location.

**Job Description** **Essential Responsibilities:** + Performs repetitive and non-repetitive production operations related to manufacturing of turbine airfoil products. + Maintain and operate manufacturing machinery using established procedures, work instructions, schematics and/or other approved documentation. + Practice safe work habits. + Other responsibilities as assigned. **Qualifications/Requirements:** + High school diploma or equivalent + Ability to read and comprehend verbal and written work instructions which may be technical in nature. + Ability to lift/move material up to 20 pounds. May be required to work with hazardous materials. + Ability to work overtime as required. + Ability to perform basic arithmetic functions + Must abide by company rules, policies and procedures + Teamwork skills + Identify problem and constraints that prevent performance of duties and responsibilities **Shifts:** 2nd shift: 2:30pm - 10:30pm & 3pm - 11pm 3rd shift: 10:30pm - 6:30am & 11pm - 7am **Desired Characteristics:** + Proficient in the use of a personal computer to navigate on-line documents, drawings, and instructions. + 3 to 5 Years of industry or similarly related job experience. + Prior experience working in a team-oriented environment **Additional Information** GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer (******************************************************************************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). No relocation provided _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Lear For You We work hard for the people who work for us. We champion our teams. We foster collaboration, inclusion, respect and excellence. What we are trying to say is we want to be more for you. We are your path to a better career, a better future, and a better you. Our teams have invented groundbreaking technologies, flawlessly manufactured millions of products and earned a long list of awards. Year after year, we are one of the World's Most Admired Companies. Our teams are the secret to our success. They are empowered, inventive and inclusive. Passionate about their craft. Driven to succeed. Because we all understand that we must work together to win. Are you ready for a better career? A better future? We're Lear For You. PRODUCTION OPERATOR GRAND RAPIDS, MI- PLAINFIELD PLANT Summary The primary role of the Production Operator is to manufacture quality products in a safe manner. Responsible for assembling and/or fitting parts together to form complete units or subassemblies at a bench or a conveyor line. May include operations requiring the use of simple hand tools and/or power or special assembly tools. The Role: Your work will include, but not be limited to: * Set up and operate machines. * Load/unload machine (may be assisted by automation or ergo aids). * Relief of fellow operators * Operate manual material handling equipment to re-stock production areas with raw material or purchased parts. * Move wheeled carts, racks, bins containing work in progress to adjacent production areas. * Inspect product quality. * Cleaning surrounding work areas * May be assigned different duties depending on plant needs. Advantages of working for Lear at the Plainfield Plant: * 401(k) * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Health savings account * Life insurance * Paid time off * Referral program * Vision insurance * Tuition Reimbursement Your Qualifications: * Ability to frequently lift up to 45 lbs. * Ability to frequently bend, reach or twist. * Ability to frequently lift, transfer at waist height 30lbs. * Ability to stand and/or walk long periods of time. * Must pass a drug and alcohol screen Bonus If You Have: * 2 years of manufacturing experience * Welding experience Schedule: * Monday - Thursday * 4 - 10-hour shifts Shifts: * 1st shift: 5:30am-4pm * 2nd shift: 4pm-2:30am * Both shifts have a 30-minute unpaid lunch and two 15 minute paid breaks Lear Corporation is an Equal Opportunity Employer, committed to a diverse workplace. Applicants must submit their resume for consideration using our applicant tracking system. Due to the high volume of applications received, only candidates selected for interviews will be contacted. Candidates must be legally authorized to work in the United States without sponsorship. Unsolicited resumes from search firms or employment agencies, or similar, will not be paid a fee and will become the property of Lear Corporation. Location Code: 0945 Nearest Major Market: Grand Rapids

The Four Slide Machine Operator is responsible for operating machines to automatically form, cut, punch, and assemble metal strip and wire by action of opposing rams and tools to fabricate precision metal parts by performing the following duties. Also, assumes responsibility for general housekeeping duties and striving toward continuous improvement. ESSENTIAL FUNCTIONS Identify all the major components of a slide forming machine. Perform preventive maintenance of all machine lubrication systems. Confirm proper operation of all safety devices. Clean machine and surrounding area. Apply and conform to all SPC documentation. Reset machines to achieve specified product dimensions. Stock up machine. Sharpen cutoff and reset to product dimensions. Verify operation of all sensor devices. Complete shift's production records (log book). Pull tooling out of machines. Setup and perform the inspection of profiles in shadow and reflection using optical comparator. Inspect sample parts using precision measuring instruments. Apply and conform to all Job Instructions (QJI's). All other responsibilities as assigned. COMPETENCIES Attention to detail Team player Flexibility and Adaptability Willingness to learn and improve EDUCATION & EXPERIENCE One year certificate from a college or technical school, or 3-6 months related experience and training. Able to use precision measuring instruments such as micrometers comparator, calipers. Ability to add, subtract, multiply, and divide in various units of measure using whole numbers and decimals. Basic computer skills. TECHNICAL SKILLS & ABILITIES Able to use precision measuring instruments such as micrometers comparator, calipers. Ability to regularly lift 10 pounds and up to 25 pounds frequently. Ability to add, subtract, multiply, and divide in various units of measure using whole numbers and decimals. SOFT SKILLS Clarity of communication, speech and writing Dependability Adaptability & Trustworthiness Trustworthiness PHYICAL DEMANDS Standing / walking for long periods of time Stooping Repetitive motion Lifting - frequently lift and/or move up to 10 - 25 pounds and occasionally lift and/or move up to 50 pounds. Reaching Workplace chemicals WORK ENVIRONMENT The work environment characteristics described below are representative of those a team member may encounter while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Regular exposure to moving mechanical parts. Noise levels in the work environment are typically moderate. Although hearing protection is not required, it is available upon request. Benefits: Medical - 1st of the month following hire date. Dental, Vision, Short Term Disability, & Life Insurance Free ASPC Health and Wellness Clinic - located in Grand Haven $100 annually for safety boots Prescription safety glasses program Paid Holidays & your birthday is a paid holiday. Automatic Spring Products Corporation is an Equal Employment Opportunity and Affirmative Action Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, protected veteran status, or disability status. We are committed to the full inclusion of all qualified individuals and will take the necessary steps to ensure reasonable accommodation is provided for those with disabilities throughout the application and interview process, as well as during employment.

Job DescriptionEmbark on a nocturnal tenure where precision doesn't sleep, and your skills light up the production line. As a Saw Operator for our plastics division, you'll work under the cloak of twilight, bringing shapes to life when the world quiets down. This temporary assignment, spanning 60 to 90 days, is a perfect sprint for those looking to boost their earnings in time for the festive season. While the future beyond this period isn't set in stone, exceptional performance may illuminate other paths within our innovative fold.Our facility, nestled in Zeeland, operates on the cutting-edge of plastic fabrication. Here, in your day-to-day role, you'll embrace the mantle of meticulousness: selecting, sizing, and shaping honeycomb structures with a steady hand and a keen eye. Your mission is not just to meet, but to exceed customer specifications, ensuring every piece you produce is a testament to our collective commitment to quality.Machine Operator Compensation: A competitive pay rate $18.90 per hour with a 10% shift premium for night hours elevating your take-home to $20.79/hour. $100 bonus for each employee you refer to WSI (and $25 for them as well!) Competitive entry-level pay with opportunities for advancement Comprehensive training in both safety and specialized skill development A respectful, inclusive, and teamwork-driven work environment On-the-job mentoring from seasoned professionals Qualifications: High school diploma or equivalent preferred Must be able to read, write and speak English This role adheres to a strict substance policy for safety federal contracts and quality assurance Ability to read and interpret work orders accurately Basic math and measuring proficiency Comfort with power tools and equipment A strong sense of responsibility and attention to detail Willingness to learn and adapt in a fast-paced setting Capacity to perform physical tasks and lift up to 50 pounds A team player mindset with a reliable work ethic Ready to shape your future? We're eager to see the imprint you'll leave on our team. If you're ready to start a path where precision and purpose meet, apply today and carve out your place in a world of innovative manufacturing.By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

Job DescriptionPlastic Injection Machine Operator Job Summary:Join a temperature-controlled facility in Rockford, MI, as a Plastic Injection Machine Operator! In this role, you'll operate plastic injection molding machines to manufacture high-quality office chair components. This innovative company uses recovered plastics to create durable products shipped across North America, Asia, and Europe. What You'll Be Doing: Operating molding machines: Run and monitor plastic injection molding machines safely and efficiently. Quality control: Inspect parts to ensure they meet production and quality standards. Production support: Perform repetitive tasks in a fast-paced environment to maintain workflow and output. Additionally, you'll assist with general production needs and maintain a clean, safe work area. What We're Looking For: Qualifications: Experience using basic hand tools Ability to work 10-12 hour shifts Strong attention to detail Skills: Basic math skills: Helpful for measuring materials and verifying quantities. Communication: Ability to read and write in English for safety and production documentation. Teamwork: Works well in a collaborative, team-oriented environment. Why Join Us?This is an excellent opportunity for both short-term and long-term employment. We are committed to providing a supportive work environment and opportunities for growth. Workbox Staffing Benefits: Weekly Pay Hire-In Opportunities Comprehensive Benefits (Health, Life, and Dental) Veteran-Friendly and Equal Opportunity Employer Ready to start? Apply online today and let's DO GOOD together!

Job DescriptionJob Title: Assistant Machine OperatorLocation: Walker, MI Shift Hours: 3rd shift M-TH 7:30PM to 6:00AM and 1st shift 6:00AM-2:30PM Monday-Friday. Pay Range: $22-$24/hour +$1 shift differential. Quarterly Production Bonus & Monthly Attendance Bonus! As a Machine Helper/Assistant you can expect to produce corrugated products for our customers in coherence with promoting the corporate vision, mission statement, and core values.Day-to-Day Role: Understand machine set-up, machine runs, plant data entry, handwork, or assembly assignments. Have good hand-eye coordination. Occasional lifting of 50 pounds and frequent lifting of 10-20 pounds. Core Skills and Qualifications: 1+ years of experience working in a corrugated box plant. Must be 18 years or older. High school diploma or equivalent. Ability to read and interpret documents such as safety rules, operating instructions and procedural documents. About Spark Packaging: Spark Packaging is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging. For us to maximize successful placement and retention, we start by listening to and understanding each of our clients. We believe in face-to-face interaction and having a solid understanding of our client's business before placement. We pride ourselves in team development as it matches our purpose as an organization to continually create career opportunities.

2ns Shift (02:30pm-10:30pm) $18.00 + $1.00/Shift Differential. Objective: The Machine Operator operates various machinery to tap, ream, form, sand, spot weld and/or rivet components in an exemplary manner according to the company quality policies. Qualified candidates will possess the following Minimum Requirements: Three months experience operating manufacturing machinery such as welders, riveters, grinders, tappers, or other assembly machinery An excellent work record, including attendance Ability to lift 25 pounds Operators are responsible for owning a set of approved calipers and micrometers (Minimum requirements are updated annually to meet the demands of various positions; employees hired prior to the latest revision update may not meet all current requirements) Essential Functions: Standard Work: Read, understand, and complete all production paperwork, including inspection check sheets, quality alerts, and standard work instructions in the job books. Follow set-up instructions when operating machines. Support activities in the change-over process. Read, follow, and complete tags. Use work scheduling system to proficiently start jobs, print labels, load components and raw materials, and close out jobs. Operate machines and/or presses to process parts via standard instructions, consistently maintaining appropriate production levels. Troubleshoot machines to ensure both part quality and maximum production levels. Manually repair parts as needed according to process instructions to meet customer specifications. Follow pack instructions according to customer specifications and prepare for shipping. Properly place scrap in the right container. Check the Total Preventative Maintenance of the machines, and if measurements are found to be out of the defined ranges, notify the Team Leader. Perform other duties as required to support production as directed by the Team Leader. Continuous Improvement/Lean Principles: Efficiently utilize machine downtime. Participate in, and support lean initiatives such as continuous improvement events and problem solving events, identifying and eliminating all types of waste. Document cost savings, consolidate processes, and eliminate unnecessary operations. Suggest and implement ideas to increase personal and departmental efficiency. Anticipate problems and work to eliminate them before they happen. Quality: Follow control plans (inspection sheets) to complete first piece and in-process checks. Conduct quality checks per check sheet and quality alerts, including visual inspections. Use calipers, micrometers, thread gages, height gages, rind gages, and other quality items as required by work center in order to ensure the production of quality parts. Stop production and notify Team Leader when a non-standard condition is found. Operate the CMM and interpret CMM reports. Safety/5S: Follow all safety procedures, including Personal Protective Equipment (PPE), controls, safety devices and use of coolants. Identify potential safety issues and take appropriate action, bringing to the attention of leadership. Organization/Communication/Professionalism: Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives. Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management. Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job. Organize and maintain efficiency of personal work area. Consistently adhere to, and support, company policies and procedures, including ISO, IATF 16949, and safety regulations. Accept instructions and duties in a positive manner. Treat all co-workers with dignity and respect. Exhibit all the attributes of a positive role model (including professionalism, personal integrity, and positive attitude) for employees and managers to emulate. Assist in maintaining company values (Integrity, People, Customers, Safety, We Can If...Do What It Takes, and Ownership) daily, through thoughts and actions. In return, Pridgeon and Clay will provide: A competitive total compensation including a comprehensive benefit plan including premium medical and prescription coverage starting at just $5.00 per week for employee coverage, dental, vision, 401(k) with company match, and tuition reimbursement. A safe, team oriented work environment with a leadership team that treats you like family and values your input An opportunity to participate in shaping the success of the organization through continuous improvement and problem solving events A positive work/life balance An opportunity for career growth - Over 70% of our leaders have been promoted from within IMPORTANT- PLEASE READ COMPLETELY BEFORE SIGNING APPLICATION PRE-EMPLOYMENT STATEMENT Equal Opportunity Policy: We are an Equal Opportunity Employer. We will consider applicants for this position without regards to any category protected by applicable federal, or local law, including but not limited to: race, color, religion, sex, national origin, age, physical or mental disability, genetic information, veteran status, or uniformed service member status. Background Check and Release of Information: I hereby authorize P&C Inc. or its appointed investigative agencies to substantiate and verify my past employment, previous salary history, professional credentials, academic degrees and any other necessary references. I also authorize my previous schools, employers, and listed references to release to P&C Inc. or its appointed investigative agencies, any relevant information, including transcripts, that may be requested in connection with my employment. If employed, I authorize P&C to release salary and benefit data as necessary to meet business needs. I agree that P&C Inc. and my previous employers, schools, and references shall not be held liable if any employment offer is not tendered, is withdrawn, or my employment is terminated due to falsity or omissions in the information I have provided. Need for Accommodation: If I have a disability that requires accommodation to do my job, I must notify the company of that need, in writing, within 182 days after I know or reasonably should have known that I needed accommodation. Failure to do so will bar me from alleging that the company failed to accommodate me under Michigan (but not federal) law. Policies and Procedures: If employed by P&C Inc., I understand and agree that such employment is subject to the policies and procedures of the company. I understand and agree that any employment offer I might receive is contingent upon execution of the Confidentiality Agreement, I-9 and this application. I further agree to wear or use, when prescribed by the company, safety equipment or protective devices and to comply with all health and safety rules and reporting requirements. I agree to abide by all administrative policies of the company. Direct Deposit: I fully agree without fear or intimidation, coercion, or reprisal, to have any compensation that I receive directly deposited into the bank, credit union, or savings and loan association of my choice. I acknowledge that if I do not provide direct deposit information, compensation will be deposited to a pay card provided by the employer. Terms and Conditions: I understand that no statement in this form, related administrative policies, or an offer of employment is to be construed as an employment contract, and that either party, without the other's consent, may terminate the employment relationship at any time for any reason with or without cause or notice. Any agreement that varies the right of the employee or P&C to terminate the employment relationship at any time, with our without cause or notice, will be null and void. Limitation of Claims: If hired, in consideration of my employment, I agree to abide by the rules and policies of this company, including any changes from time to time, I agree that any lawsuit or claim against the company arising out of my employment or termination of employment (including but not limited to, claims arising from state, federal, or local civil rights laws) must be brought within the following time limits or forever be barred; (a) for lawsuits requiring a notice of rights to sue from the Equal Employment Opportunity Commission, within 90 days after the EEOC has issued that notice: or (b) for all other lawsuits, within (I) 180 days of the event(s) giving rise to the claim or (II) the time limited specified be the statute, whichever is shorter. I waive any statutes of limitations that exceeds this time limit. Confidential Agreement: I also understand and agree that I will not disclose or use any and all P&C confidential and proprietary information that I may acquire in the course of the recruitment process, in the course and scope of my employment, as well as after my employment with P&C. Pre-Employment Background Check: All applicants must pass a background check prior to beginning work. Refusal to allow the company to run a background check will result in disqualification of further employment consideration. I hereby affirm that the information provided on this employment application form and on my resume is true and complete to the best of my knowledge. I understand and agree that falsified information or omissions may result in termination from employment if discovered after my employment has begun, and that the offer of employment may be rescinded. With my signature on this application, I hereby agree to all terms above.

Craft the Future: Be a Box Maker at Hood Container! Join Hood Container Corporation and experience the difference! We're a growing leader in the corrugated packaging industry, and we're looking for skilled and motivated corrugated professionals who has experience working in a corrugated packaging facility. Join our team and unbox your potential! What You'll Do: Safety first: Maintain a safe and clean work environment. Master our converting equipment: Set up and assist operate either Rotary Die Cutter or Flexo Folder Gluers in the production of corrugated boxes. Ensure quality: Inspect and monitor production runs, ensuring products meet the highest quality standards. Drive efficiency: Maximize machine uptime and productivity. Continuous improvement: Identify and implement process improvements to increase efficiency and reduce downtime. What You'll Bring: Proven experience: At least 6 months of experience operating corrugated industry equipment. Technical skills: Strong understanding of equipment operation, maintenance, and troubleshooting. Safety focus: Prioritize safety in all aspects of your work. Quality Mindset: Working with a one box set up mindset, to ensure quality expectations are met & minimize waste. Team player: Collaborate effectively with other team members to achieve production goals. Here's why you'll love working at Hood Container: Competitive pay & benefits: We offer a base salary based on experience, a quarterly bonus program, and a comprehensive benefits package to keep you healthy and happy. Continuous learning: We invest in paid training and development to help you grow your skills and advance your career. Caring & Empowering Company Culture: Supportive & collaborative team dedicated to seeing you unbox your potential to help make a difference & make customers happy. Growing Company in a Sustainable Industry: Consider a Future in Corrugated Packaging Our goal is to be a diverse workforce that is representative, at all job levels, of the citizens and customers we serve. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. Hood Container Corporation is a family-owned, Mill to Market company, specializing in containerboard and kraft paper, corrugated boxes, high graphic displays, and contract packaging. Our commitment to customer happiness, employee well-being, environmental stewardship, and operational excellence drive our business. Over the last decade, Hood Container Corporation has grown to become one of the top ten Paper and Packaging Companies in the United States. To learn more about Hood Container Corporation visit ********************* or check us out on social media! Monday - Thursday 4 pm to 2 am Paid lunch break

Job Description PRODUCTION OPERATOR This position involves daily production, staging steel and bundles for upcoming runs, loading and clearing units, visual and physical inspection of steel color, profile, gauge, and quality, control of output profiling sections with work drawings. DUTIES: Operate overhead crane to load and unload steel coils Work safely, following all safety procedures Create list orders for production Stage bundles for upcoming run Loading and clearing units Ensures that any task performed within the work cell is completed in accordance with the written Standard Working Operating Procedure(s) for that task. Contributes to an ongoing culture of cleanliness and order within the workstation/cell. Prepare and make chemical recipes for the production of insulated foam. Troubleshoot and resolve technical issues that arise during operations. Interpret and understand technical specifications, instructions, and measurements. Collaborate with team members to achieve production goals and timelines. Monitor production processes to ensure quality standards are met. BASIC QUALIFICATIONS: Minimum High-school Diploma or equivalent. Well-organized Attention to detail and accuracy Mechanically inclined. Able to monitor proper functioning of equipment Experience handling hand and power tools Excellent Communication Skills. Able to work in team, and independently WORK ENVIRONMENT: You will be working in a brand new, natural light filled, State-of-the-Art Facility in Walker Michigan. Does get warm in the summer months PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception, and the Ability to adjust focus. While performing the duties of this Job, the employee is regularly required to stand for prolonged periods; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is frequently required to walk and climb or balance.

PADNOS is a full-service recycling company handling paper, plastic, metals and electronic recycling. We tailor recycling programs for consumer and industrial clients throughout the United States. PADNOS was founded over a century ago and continues to transform the recycling industry. The company has thrived as a family business through four generations and has grown to be a market leader and best in class innovator. Environment for Manufacturing Machine Operator/Equipment Operator: This position is in our Wyoming location focused on metals. The manufacturing machine operator will be working with multiple balers to bale metals. It is often loud instead the plant due to machinery. PPE is required such as hard hat, safety glasses, high vis, steel toed shoes, and gloves when needed. This role is inside all day in a plant that is hard to regulate the temperature (it can be hot or cold depending on weather outside). This is a great opportunity if you are looking to get your foot in the door somewhere and grow your career! Manufacturing Machine Operator Schedule: 12 Hour shift Rotating days worked Manufacturing Machine Operator / Equipment Operator Position Summary: The Manufacturing Machine Operator is responsible for safely operating equipment such as hi-lo, loader, forklift, sweeper and/or small loader to assist in loading, unloading, grading, inspecting, buying and transportation of materials. Mechanical experience is a plus as the machines do break down and it is helpful to do what we can without calling maintenance. Distinguish between numerous grades and types of materials using basic identification tests according to company standards Perform required bore, during and after-operation user maintenance Monitor equipment, troubleshoot and/or notify management of any malfunctions that occur Maintain and protect all property entrusted to you in excellent condition Prepare various documents and reports Troubleshoot and mechanical diagnosis to identify repair needs such as motors, gearboxes, augers, pulleys, conveyors, and more. Prepare and complete required paperwork Manufacturing Machine Operator / Equipment Operator Qualifications: Six months operating small equipment experience preferred (hilo, loader, forklift, scissor lift) Equipment operation and preventative maintenance knowledge (conveyors, pulleys, etc) Loader operator experience preferred Hilo experience required Good interpersonal and customer service skills Ability to multi-task and work in a fast pace environment Ability to work independently and as part of a team Accuracy in operation and attention to detail PADNOS has a rich history of taking care of our team members, their families and the multiple communities we serve. We invest in our team members and offer the following benefits: Competitive Wage Medical, Dental and Vision Insurance 100% Tuition reimbursement for Team Members 75% Tuition Reimbursement for dependents First Time Home Buying Assistance 401K Match and Profit Sharing Performance Driven Bonuses Be a part of the green movement and join PADNOS today! PADNOS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, weight, height, sex, sexual orientation, marital status, national origin, age, genetic medical information, protected veteran status, or disability status.

Roskam Foods Quality. Safety. People. Performance. AFT PLANT 1140 Butterworth St SW Grand Rapids, MI 49504 Do you like to stay in shape? Throw heavy bags around? Lift 50 pounds at a time? Then we have the job for you. YOU are a hard-working individual with a desire to work for a growing company in your community? We are Roskam Foods baking great products since 1923 and continue to produce some of your favorite snacks today. Give us a look and see what we are all about. What you get: Machine Operator 1 positions (heavy lifting) starting at $18.00/hour or more (experience required) 2nd shift inventive of $1.50/hour 3rd shift incentive of $3.00/hour Weekly pay A growing company with a family feel Market competitive wages 401K A variety of affordable benefit options (Medical, Dental, Vision, etc.) No cost medical options with CareATC Paid Time Off and Holiday Pay Employee Assistance Program What you do: The Machine Operator 1 workers are the heart of the company. They do the little things and do them well. They keep production going and help produce some of the greatest food products around. The Machine Operator 1 work as: a bag filler stacker heavy loader (primary role) What you need: Looking to stay in shape? Like to throw some weight around? This job is for you. This position is fast paced and requires basic math and reasoning skills. #The general laborer must be flexible in the hours and days that they work and be available as needed for inter-company work or weekend work as deemed necessary by the Company. Who we are: Roskam Foods has been making a variety of delicious bakery products and snacks in West Michigan since 1923. We started with pies, breads, and other baked foods and over the years we have continued to grow our product lines and have branched out into a variety of snack foods. Today, we continue making what we think are some of the best baked snacks around. We take great pride in what we do and strive to deliver consumer value by using only the highest quality ingredients to create the very best products. AAP/EEO Statement: Roskam Foods is a recognized veteran friendly and equal opportunity employer.

Corium Innovations is seeking a Pharmaceutical Machine Operator for weekend night shift who will set up, operate, and troubleshoot extrusion and web equipment to meet product quality specifications. This position also maintains accurate production documentation, following cGMP and company policies. Your most Innovative career move is here! At Corium Innovations, we've led the way in innovating drug delivery technologies for millions of patients whose GI systems just can't tolerate pills, who can't remember to take their meds as directed, or who have needle-phobia. This is only the beginning! There's so much more to deliver, and we need YOU to do it! Our Purpose is to create, develop and manufacture innovative healthcare products for partners that deliver superior value to patients. Our Goal is to be the best-in-class specialty CDMO through the use of innovative technologies and superior execution. Our Company Values are core to our positive and people-centric culture which inspires all of us to come to work every day on behalf of our people, our partners, our customers, and our patients. Through our four core values, we put people first and create opportunities to make each day better than the last. Celebrate Individuals: We're looking for talent who will celebrate the uniqueness of each of our team members by encouraging everyone to bring their authentic self to work. Successful Together: We believe we're better together, so we prioritize teamwork as we work to achieve our shared vision knowing each one of us has an important role to play. Embrace Innovation: We embrace new challenges and opportunities while encouraging creative thinking and innovative solutions to best meet the needs of our people and our partners. Pride in Ownership: We take pride in owning our progress and successes, feeling empowered to pursue our growth to reach our full potential. And we hope you will too! Responsibilities: Maintain a working knowledge of Good Manufacturing Practices. Operation, troubleshooting and basic maintenance of production equipment. Accurately complete all required batch record, equipment cleaning, and equipment logbook documentation. Ensure production crew is on task and focused on safety, quality, and productivity. Perform digital inventory material transactions. Communicate with Crew Leaders, Shift Leaders, Maintenance, and Engineering personnel regarding process and equipment related issues. Clean equipment and manufacturing facility per cGMP procedures. Qualifications: High school diploma or GED. Minimum of 1 year of experience in a manufacturing environment preferred Proven mechanical aptitude and troubleshooting skills. Ability to follow written instructions and procedures. Ability to follow press diagrams and read part prints. Ability to effectively communicate quality issues effectively to supervision. Ability to accurately complete documentation. Strong team player. Strong interpersonal and communication skills. Ability to work 3x12 hour weekend night shifts (6pm - 6am Fri., Sat., & Sun.). Benefits & Compensation: Highly competitive benefits program including medical, dental, vision, flexible spending accounts, life insurance, disability insurance, and employee assistance program. 401(k) retirement savings account with a company match and immediate vesting. 12 paid holidays. Competitive paid vacation plan plus ~1 additional week of paid time off for our annual holiday shutdown. $3.50/hour weekend night shift premium.

Job DescriptionPurpose: We are seeking a hard-working, self-motivated individual to join our team at Mixed Employment Partners. Our goal is to foster a collaborative and diverse workforce where dedication and initiative drive excellence in achieving our organizational objectives. Responsibilities: Responsible for operating various machines to ensure efficient production. They monitor machine performance, adjust settings, and load raw materials while maintaining product quality standards. Operators must follow strict safety protocols, wear personal protective equipment, and ensure machines run within safe parameters. They also perform routine maintenance, troubleshoot issues, and report malfunctions to supervisors.Additionally, machine operators keep accurate records of performance and production, meet deadlines by minimizing downtime, and collaborate with team members to achieve goals. They handle materials, ensuring proper storage and disposal of scrap metal, and follow environmental guidelines. Ongoing training is essential for staying updated on new equipment and safety practices. Overall, they play a key role in ensuring safe, efficient, and high-quality steel production. RequirementsHigh School Diploma or Equivalent Must be proficient with precision gages and computers.

Machine Operators Needed in Grand Rapids on 3rd Shift! Arrow Staffing is currently hiring machine operators for a foam manufacturer by the Grand Rapids airport. This team member will assist with accurately and safely operating the required equipment and performing duties necessary to ensure the manufacturing of quality foam products for the automotive, medical, and aerospace industries. This is a long term, temp to hire opportunity with weekly pay! Schedule: 3rd Shift Sunday to Wednesday 7:00 PM to 5:30 AM OT schedule: Thursday 9:00 PM to 5:00 AM Starting Pay: 3rd Shift - $17.00 per hour Requirements: High school diploma or GED equivalent Ability to set up and run machinery Blueprint reading Intermediate math, measurement, and standard metric skills Basic computer skills Ability to have great attendance Ability to work well in a team environment Ability to lift 10 lbs frequently, and up to 40 lbs occasionally Ability to stand and walk for up to 10 hours Ability to use hands to touch, utilize, and handle materials, parts, and equipment Comfortable working in a loud manufacturing environment Job Duties: Perform production operations including, but not limited to, machining operations using: Heat guns, press, saws, hot wire equipment, ovens and water jets Laminating and routing equipment Machine set up, die changes, and tooling changes as needed Complete and understand required production documents including but not limited to, production orders to ensure products match customer requirements Monitor machinery and inspect parts visually to ensure quality requirements are achieved Report any discrepancies or issues to supervisor Perform all other duties as assigned or needed Comply with all safety procedures including, but not limited to, proper lifting mechanics, lock out-tag out, forklift operation, and use of protective equipment. Interested candidates can apply online at www.arrowstaffing.com or by calling 616-600-0625 to speak to a recruiter! Arrow Staffing has been connecting people to change lives since 1972. As a staffing leader, we partner with many of the area s best companies to help our associates realize their career goals. To find additional opportunities with Arrow Staffing, go to our website www.arrowstaffing.com and search jobs.

Job DescriptionMachine Operator Holland, MI Full-Time | $19-21/hr 2nd Shift Job Responsibilities Operate production machinery and equipment to manufacture components according to specifications and production schedules. Set up machines, load materials, and monitor operations to ensure proper performance and quality output. Inspect parts using gauges, calipers, and other measuring tools to verify accuracy and consistency. Adjust machine settings as needed and report mechanical issues or defects to maintenance or supervision. Follow work orders, blueprints, and standard operating procedures to ensure correct product manufacturing. Maintain a clean, organized, and safe work environment following company safety standards and PPE requirements. Record production data, complete required documentation, and communicate any issues to shift leaders. Assist with basic machine maintenance tasks such as cleaning, lubrication, and tool changes. Qualifications Previous experience as a machine operator or in a manufacturing environment preferred. Ability to read and follow work instructions, blueprints, and production schedules. Strong mechanical aptitude and basic troubleshooting skills. Familiarity with measuring tools such as calipers, micrometers, and tape measures. Ability to lift up to 50 lbs and stand for the duration of the shift. Strong attention to detail, reliability, and teamwork skills. #TSTRATHP

Job Description Title: Machine Operator Reports to: Production Supervisor We're thrilled to announce an exciting update for machine operator positions: starting pay has been increased to $21 per hour! Shifts Available: 1st, 2nd (10% Shift Premium), 3rd (6% Shift Premium), Rotating 12-Hour Days, Rotating 12-Hour Nights (10% Shift Premium) Medical, Dental and Vision benefits are paid 100% by LG Energy Solution! LG Energy Solution Michigan Inc. (LGESMI) develops and manufactures large lithium ion polymer batteries and packs for electric vehicle (EV) and energy storage applications. Come join the leader in advanced EV batteries! ****************** Summary: As a Technical Operator I, you will be operating the assigned process/equipment in accordance with the work instructions. You will help support production volumes and quality under the production plan while using equipment and computerized systems to produce, assemble, evaluate, process and package lithium-ion batteries in a climate-controlled environment. Responsibilities: Prepare equipment and materials for production Operate equipment in accordance with the OP Manual, in-putting materials, and monitoring defects/loss for continuous operation Conduct self-inspection of the product and check the quality Maintain accurate records of production work in GMES (Global Manufacturing Execution System) Track all non-conformations and scraps Compliance with health/safety/environmental/fire regulations Perform 5s audits, maintain production logs, quality checks and maintenance work logs Maintain cleanliness at work-site in accordance with 5S3R Standards: Sort, Set in order, Shine, Standardize, Sustain Right Location, Right Quantity, Right Container Follow LGESMI existing cleaning SOP's during downtime (e.g. line stop, waiting time, etc.), which includes cleaning your designated machine and/or surrounding work area Perform other duties as assigned Qualifications: High School Diploma or GED preferred Experience: 1 to 3+ years of manufacturing experience Skills: Basic computer literacy Communication skills Problem solving and analytical skills Basic arithmetic ability Reading and writing skills Ability to work well with individuals and teams to ensure the team meets & exceeds expectations Physical Requirements: Must be able to properly and regularly utilize the following PPE for a period of up to 12 hours Safety glasses Steel-toed shoes nitrile gloves ear protection clean room suit Must be able to do the following repeatedly for a period of up to 12 hours Lift/push/pull up to 50 pounds Stoop, twist, bend Reach overhead Sit and/or stand Use of hands and fingers to perform job function LGESMI is an Equal Opportunity employer that values the diversity of its workforce. EEO

EG Workforce Solutions is hiring for 3rd shift Machine Operators with a leading automotive supplier in West Michigan! Earn at least $728.00 per week with the opportunity to earn more based on shift and overtime! Join the EG Team Pay will vary based on role with a minimum starting pay of $13.00 an hour on 1st shift; $.25 shift premium paid for 3rd shift; EG Associates are paid weekly through direct deposit and pay card EG offers many benefits to our long term employees, work an average of 40 hours per week and receive: Twelve paid holidays once you complete 1500 hours of work After 60 days you have access to Health Care Benefits at our group rates Eligible to receive Paid Time Off based on tenure HSA (Health Savings Account) are also available after 60 days of employment. REFERRAL BONUS - Earn money by referring your friends and family! Register your referral on our website ************* and once they work 45 days you will receive $100 and they will receive $50! There is no limit to how many you refer to EG. Job Duties:: Machine Operator Racking parts into a machine Packing and loading parts into totes Packaging and loading skids (15-25lbs) Work Hours: 3rd Shift 8:00pm - 6:30am Overtime and weekends Locations: Kentwood, MI 49508 USA Job Requirements: Must be able to repeatedly lift 25 pounds Flexibility to work overtime and weekends Warehouse experience is preferred, not required At EG, our mission is to help people succeed. We do that by matching people like you with open jobs at reputable companies who are hiring now. The EG team is trained and dedicated to guiding you through the hiring process, and finding you a job, a paycheck, and a workplace community that values YOU. EG is more than a staffing agency. We partner with people to help them work forward to a better life.

Enwork is an Equal Opportunity Employer (Minorities/Women/Veterans/Disabled) Enwork is a dynamic, fast-growing company that's been making a mark within the contract furniture industry. Our products are found in offices, universities, and other spaces around the globe. We're lucky to outfit some of the leading brands in the world, including Lyft, Microsoft, Tesla and Snapchat. We offer a variety of benefits including health/prescription insurance, dental insurance, vision insurance, long term disability, short term disability, life insurance, 401k, paid time off and more. Wages will be commensurate with experience. Enwork is looking for experienced machine operators to work in our wood furniture department. Responsibilities: Manufacture product in a team environment to fulfill customer requirements Ability to manufacture parts per blueprints/drawings Performs routine preventative maintenance of machines when necessary Troubleshoot equipment Ensure proper machine setup and accurate interpretation of prints and specifications to produce products correctly Requirements Ability to operate CNC routers, saws, and edge banders (a plus) Quality craftsmanship with a good eye for detail including inspection of finished components. Ability to read and interpret engineering prints Exceptional problem solving skills Teamwork mentality to drive continuous improvement Maintain a clean and efficient area Ability to lift up to 50 pounds consistently Ability to stand, bend, twist and reach throughout the entire shift Reliable with excellent attendance Enwork designs and manufacturers contract office furniture and is based in Lowell, MI. We're family owned, we work hard and are one of the fastest growing companies in the industry. Check out ************** for more information.