Press operator jobs in Port Orange, FL - 91 jobs

Job Description This is the first step in manufacturing aluminum trailers. Must recognize and be conscious of quality, tolerance and accuracy of finished parts. Will operate ( brake press, benders, saws, belt sanders, CNC milling centers, and a shear ) in order to fill job orders. Will deburr, blow out all parts, stack and band all finished parts. Will operate and maintain set ups on special purpose machines where operations may involve several progressive machining sequences, and will give instructions on operating procedures. Requires complete knowledge of machine shop operations as acquired by on-the-job training and experience. Operation responsibility includes but are not limited to verifying blueprints, 1st piece inspections, proper measurements, safety of equipment operator is using, accurate count of parts and proper documentation on job orders. The work is repetitive and subject to processes inspection. Position Duties: Reads job order and blueprint specifications. Set up machinery for jobs to run efficiently with all parts checked to blueprint and job order. Operate machinery efficiently while maintaining 1st piece inspection on all parts, all 1st piece inspections are checked to the job order and blueprint. Demonstrate timely communication of needed materials. Responsible for the safety of the equipment he/she is using. Responsible for notifying supervisor of any and all repairs needed. Recognize obvious defective or damaged parts, incorrect sizes, faulty workmanship and general quality. Double check job order to finished part. Must be able to follow directives and procedures and complete paperwork. Ensure no material is used or moved unless it has a part number on it. All counts must be consistently accurate. Work area must be maintained as clean and organized. Work in compliance with all safety, quality and housekeeping standards in accordance with company policies. Performs other duties as assigned by management. Required Education: A high school and/or GED is preferred. Must be able to read tape measure and follow a job order. Good math skills are required, must be able to give accurate counts. Must pass a measuring test. Must be able to read blueprints, must pass a blueprint reading test with 85% accuracy or higher. Good verbal and written communication skills are required, must have legible penmanship. Training: Requires a fundamental knowledge of machine shop operations as required by short job training and experience. Must have some direct experience setting up some or all of the machines, brake press, punch press, drill press, benders, saws, belt sanders, shear, and CNC milling centers. Prefer direct experience instructing others and working as part of a team. Qualifications: Physically fit to perform lifting assignments with a weight limit of no more than 40lbs. Must be able to read blueprints and job orders within 90 days of start date. Job Type: Full-time 10 hour 4 days a week Benefits: 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Referral program Retirement plan Vision insurance Experience: CNC milling machine: 1 year (Preferred) Monday - Thursday 6am to 430pm

Signature Systems Group is hiring multiple Machine Operators for our NIGHT SHIFT. Immediate openings available! Rotating days (4 days per week/ 3 days per week), Shift Differential and THREE weeks of PTO the first year! PM Shift - 6:45PM to 7:00AM (rotating weekends required) Must be able to speak and understand English. You will load and operate machinery to manufacture semi-finished parts (large composite/plastic matting parts) for assembly. Essential duties include: Move parts and materials to and from production or storage areas. Operate, troubleshoot, and optimize equipment for maximum cycle-time efficiency. Conduct quality control checks. Keep work area organized and clean. Qualifications and Requirements: Experience working in a manufacturing or industrial environment preferred. Must be able to lift 50 lbs. Must be able to adapt to environmental changes and working conditions; such as temperature and noise. Must have transportation to and from work. Forklift experience is preferred but not required PM Shift - 6:45PM to 7:00AM (rotating weekends required

About Clean the World At Clean the World, we believe business can and should be a force for good. Our mission is to reduce waste, protect the planet, and improve lives through sustainability, innovation, and social impact. Through our global operations, we recycle, redistribute, and repurpose hygiene and hospitality products, helping to save lives, reduce waste, and protect our planet. With over a decade of measurable impact, we continue to innovate solutions that align environmental responsibility with business growth. Our Values: Clean the World Genome Our people are united by shared values that define how we work and lead: Boldly Ask Why: We challenge convention to create progress. Driven by Purpose: Our mission drives our growth. Grit Gets It Done: We persevere, adapt, and execute with excellence. CARES: Compassion, Collaboration, Accountability, Respect, Resilience, Excellence, Sustainability. We don't just talk about impact - we deliver it, every day. Why Join Us When you join Clean the World, you join a global community of innovators, dreamers, and doers united by purpose. You'll have the opportunity to: Work with a division that directly drives global growth and sustainability. Be part of an award-winning organization recognized for innovation and social good. Collaborate with a passionate, mission driven team making a measurable impact every day. Thrive in a culture that values creativity, collaboration, and results. Role Machine Operator Recycling is responsible for operating and maintaining Clean the World's soap and plastic recycling lines. This role ensures continuous, efficient, and safe production by operating shredders, dewatering presses, mixers, plodders, cutters, and stampers used in the recycling and reforming of collected materials. The operator will be cross trained across both the soap and plastic recycling processes to maximize production output, ensure product quality, and maintain machine reliability. Key responsibilities (not limited to) Soap Recycling Line · Operate soap recycling equipment including mixers, refiners/plodders, cutters, and stamping machines. · Monitor feedstock consistency and adjust machine settings for optimal throughput and bar quality. · Inspect and maintain soap recycling machinery, ensuring cleanliness and efficiency. · Troubleshoot production issues and perform minor repairs or adjustments as needed. · Maintain accurate production logs and follow daily batch production schedules. · Adhere to quality control and safety procedures during all stages of soap reformation. Plastic Recycling Line · Operate industrial shredders and dewatering screw presses to process collected plastic bottles and containers. · Monitor feed material for contamination and ensure consistent flow through the system. · Adjust machine parameters to achieve optimal liquid removal and throughput. · Perform routine cleaning and preventive maintenance to ensure reliable operation. · Record output metrics, moisture levels, and system performance data. · Ensure proper handling and staging of processed plastic for downstream recycling partners. Qualifications Education: High school diploma / GED Experience : 3+ years of experience in a manufacturing, recycling, or processing environment. Experience operating extruders, plodders, shredders, or other continuous-feed processing equipment. Identify and correct machine performance issues. Ability to perform routine equipment maintenance, part replacement, and minor repairs. Understanding of production safety protocols and lockout/tagout procedures. Demonstrated ability to meet production goals while maintaining product quality. Comfortable working in industrial environments with heat, noise, and moving equipment. Excellent teamwork, communication, and documentation skills. Ability to lift up to 50 lbs and stand for extended periods. Willingness to cross-train and operate both soap and plastic recycling lines as needed.

Join our team at Drewry Site Development in South Daytona, FL! Are you an experienced Equipment Roller Operator looking for a new opportunity? Look no further! Drewry Site Development is seeking a skilled Equipment Roller Operator to join our team. As an Equipment Roller Operator at Drewry Site Development, you will be responsible for operating heavy equipment rollers to compact earth and materials. Your role will be crucial in ensuring that construction projects are completed efficiently and to the highest standards. We are seeking a skilled Equipment Roller Operator to operate heavy machinery used in road construction, paving, grading, and other civil projects. The operator will be responsible for compacting soil, gravel, asphalt, and other materials to create smooth and stable surfaces, while ensuring adherence to safety, quality, and project specifications. As an Equipment Roller Operator at Drewry Site Development, your responsibilities will include: Operating heavy equipment rollers to compact earth and materials Following project specifications to achieve proper compaction levels Working closely with the construction team to ensure project deadlines are met Maintaining equipment in good working condition Adhering to all safety protocols and procedures If you are a motivated individual with a passion for construction and a strong work ethic, we want to hear from you! Join our team at Drewry Site Development and take the next step in your career as an Equipment Roller Operator. About Drewry Site Development Drewry Site Development is a leading construction company based in South Daytona, FL. With over 20 years of experience in the industry, we specialize in site development, land clearing, and earthwork services. Our team of skilled professionals is committed to delivering high-quality results for our clients, on time and within budget. At Drewry Site Development, we prioritize safety, quality, and professionalism in everything we do. We offer a collaborative work environment where employees are valued and opportunities for growth and advancement are available. Join our team and be a part of a company that values integrity, teamwork, and excellence.

What Product Test and Calibration contributes to Cardinal Health Product Test & Calibration sets up, aligns, monitors, and/or calibrates production equipment. Assists and may perform maintenance on machines and cleans up minor chemical spills in assigned area as well as glassware, ovens, and other equipment. Job Description The primary purpose of this position is to set-up, maintain, operate, test and inspect product, and perform repairs on associated departmental equipment in conformance to FDA, GMP's, ISO 13485 standards and finished product specifications. Minimize scrap generation from processes and promote workplace safety. Provide process information to management so production equipment may be optimized and/or process corrected. Assist with training of personnel to perform various functions within each assigned area. Facilitate work flow and ensure product quality is maintained. Shift Details * 3:00 pm to 11:00 pm - Monday through Friday Accountabilities * Perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule. * Adhere to plant policies/procedures, department EHS rules, Good Manufacturing Practices (GMP's), ISO 13485 regulations and Good Housekeeping procedures. Shall operate in a manner that protects the health and safety of its employees/visitors and operate in a manner that conserves energy, natural resources and protects the environment. * Complete all pertinent paperwork pertaining to the finished product being produced according to established guidelines in the manufacturing procedures. * Prepare and maintain required maintenance equipment records. Use of micrometers, dial calipers, and other precision measuring instruments to perform dimensional and physical inspections. Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards. * Uses ANSI/ASQ Z1.4 sampling standard, part drawings, and specifications to determine inspection and testing required as well as acceptable quality levels. * Selects products for inspection evaluation at specified stages in production process, performs various visual, dimensional, performance, mechanical, electrical, or chemical inspections per required characteristics. * Report any unusual circumstances to supervisor and perform other miscellaneous duties as assigned. * Basic computer skills with windows based programs. * Responsible for the observation of department regulations and to use personal protective equipment (PPE) as required; must be safety conscious and Lockout/Tag-out trained. * Transport hazardous waste to accumulation areas. Complete Annual Hazardous Waste (RCRA) refresher training. * Cross-train and support where needed throughout the facility. Qualifications * High School Diploma or GED preferred. One year certificate from college or technical school (machinist, engineering technology); or equivalent combination of training and experience. * 3-4 years medical device manufacturing related experience or equivalent combination of training and experience preferred. What is expected of you and others at this level * Applies basic skills and techniques to complete routine tasks within assigned area * Maintains appropriate licenses/training/certifications * Works on basic and routine assignments * Works within clearly defined Standard Operating Procedures and/or scientific methods * Adheres to all quality guidelines * Works under close supervision. All work is reviewed for accuracy * Any deviation from the norm is approved by the supervisor before proceeding Department Specific Functions * Setup various production machines and ancillary equipment according to procedures and product specifications utilizing small hand tools, i.e. wrenches, pliers, screwdrivers, drills and channel locks. * Monitor machinery and process goals during shift and make adjustments as necessary to ensure optimum performance of processes. * Diagnose and troubleshoot equipment malfunction and either repair equipment or arrange for technical support to complete repairs. Pay rate: $17.75 per hour (includes shift differential) Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. * Medical, dental and vision coverage * Paid time off plan * Health savings account (HSA) * 401k savings plan * Access to wages before pay day with my FlexPay * Flexible spending accounts (FSAs) * Short- and long-term disability coverage * Work-Life resources * Paid parental leave * Healthy lifestyle programs Application window anticipated to close: 12/24/2025 *if interested in opportunity, please submit application as soon as possible. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

GARNEY CONSTRUCTION A Heavy Equipment Operator position in Sanford, NC is available at Garney Construction. To be considered for this position you must have previous construction experience. As an operator, you will operate machinery to perform activities such as excavating, backfilling, trenching, ditching, clearing, looming, fine grading, and final clean up. The heavy equipment operator may perform functions of a laborer as required. WHAT YOU WILL BE DOING Operate heavy equipment safely as part of a crew. Perform Operator-level maintenance on the machine. Understand safe working loads and signals. Must be willing to work overtime as required. WHAT WE ARE LOOKING FOR 3 years of construction experience. Firm knowledge of equipment operations and maintenance. Must be willing to work overtime as required. Willing to travel. LET'S TALK THE PERKS! Employee Stock Ownership Plan (ESOP) 401K Retirement plan Health, dental, and life insurance Bonus program Paid holidays Paid time off Flexible Spending Account (FSA) or Health Savings Account (HSA) Long-term disability CONTACT US If you are interested in this Heavy Equipment Operator position in Sanford, NC then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com.

Machine Operator - Day Shift Pay Rate $18.00/HR We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools When you join KIK Consumer Products, you're joining a team that cares about the work we do and also about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. What You'll Be Doing • Operate various high speed liquid filling machinery including but not limited to fillers, labelers, cappers, palletizers, depalletizes case erectors, and heat induction sealers case erectors, etc. • Examine and act on production orders to determine quantities to be manufactured, job specifications and or special instructions. • Maintain time and production records. • Maintain quality standards. • Conduct basic troubleshooting on the assigned equipment and perform minor equipment adjustments and changeovers. • Follow Safety /GMP guidelines. • Comply with PPE, Good Manufacturing Practices, Standard Operating Procedures, Safety Standards, and follow all plant policies and procedures. The above statement describes the general nature and level of work only. They are not an exhaustive list of all required responsibilities, duties, and skills. Other duties may be added, or this description amended at any time. What You'll Bring • 1-2 years' experience as a Machine operator in the packaging industry. • Production knowledge of raw materials, production processes, quality control and other techniques for effective manufacturing preferred. • Must be able to verbally communicate, read and write in English. • Basic mathematics skills required. • Must be able to take direction and work unsupervised What You Will Get KIK offers a competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. We understand compensation is an important factor as you consider the next step in your career. This position has a base hourly rate of $18/HR. About KIK We create the products and brands that people trust to clean, sanitize, and protect their homes, pools, and cars. We are one of North America's largest independent consumer product manufacturers with 16 North American manufacturing facilities. We also operate globally in Canada, Europe, and Australia. We are known for our portfolio of notable brands including Spic and Span and Comet cleaning products, Clorox Pool&Spa™ (under license), BioGuard , and Natural Chemistry pool chemicals. We are also the #1 producer in North America of store-brand (“private label”) bleach and a leading private-label provider of laundry detergent and additives, dishwashing products, general-purpose cleaning, and other home care products. Our global team of over 2,300 employees drives our capabilities in product development, product formulation, strategic sourcing, manufacturing, packaging design, brand marketing, project management, quality assurance, compliance, distribution, and logistics. Our organization is constantly evolving and is driven by a set of “One KIK” values - a dedication to following through on commitments in a customer-focused, profit-motivated way; while never compromising on safety, ethics, or integrity. KIK is an Equal Employment Opportunity / Affirmative Action employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information or any other status protected by law. KIK is also committed to providing reasonable accommodations for applicants and employees with protected disabilities to the extent required by applicable laws. If you require a reasonable accommodation to participate in the job application, or interview process, or to perform the essential functions of the job, please contact Human Resources immediately. Privacy Policy: ************************************************

Temp We are seeking multiple Machine Operators for an established manufacturing facility in the Ormond Beach area (off US1). Schedule: Monday thru Friday, 11pm to 7am Experienced Machine Operators will: Make sure the machine is properly set up Create or modify products as needed Safely operate a variety of machines after being cross-trained Skills and Qualifications of the Machine Operator: 1 year of Machine Operator experience REQUIRED Strong attention to detail is REQUIRED, making sure each part is correct. Benefits once hired in! You will receive a raise and shift differential. You also have the opportunity to earn raises more quickly by mastering different machines. Health, Dental, Vision, & Life Insurance PTO 401K with match Employee Assistance Program This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Production Supervisor Work Model: OnsiteYour Role and Responsibilities Learns to follow quality plans, read and apply work instructions, and blueprints to determine job specifications and material requirements. Documents work completed using manufacturing system. Checks quality. Positions work piece against stops, or aligns layout marks with die or blade. Pushes button or depresses pedal to activate machine. Observes machine operation to detect work piece defects or machine malfunction. Learns to measure work piece dimensions to determine accuracy of machine operation using dial calipers, snap gauges or micrometers. Stacks, marks, packs, and transports finished work pieces. Education and/or Experience :High school graduate or GED preferred but not required. Previous manufacturing experience not required but desirable.Ability to lift up to 30 lbs. regularly.What's in it for you?We want you to bring your full self to work-your ideas, your energy, your ambition. You'll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. BenefitsABB offers a full range of benefits to help you thrive at work and beyond.More about us ABB Installation Products Division (formerly Thomas Betts), helps manage the connection, protection and distribution of electrical power from source to socket. The Division's products are engineered to provide ease of installation and perform in demanding and harsh conditions, helping to ensure safety and continuous operation for utilities, businesses and people around the world. The Commercial Essentials product segment includes electrical junction boxes, commercial fittings, strut and cable tray metal framing systems for commercial and residential construction. The Premier Industrial product segment includes multiple product lines, such as Ty-Rap cable ties, T&B Liquidtight Systems protection products, PVC coated and nylon conduit systems, power connection and grounding systems, and cable protection systems of conduits and fittings for harsh and industrial applications. The Division also manufactures solutions for medium-voltage applications used in the utility market under its marquee brands including Elastimold™ reclosers and switchgear, capacitor switches, current limiting fuses, Homac™ distribution connectors, Hi-Tech Valiant™ full-range current limiting fuse for fire mitigation, faulted current indicators and distribution connectors, cable accessories and apparatus with products for overhead and underground distribution. Manufacturing includes made-to-stock and custom-made solutions.What's in it for you?We want you to bring your full self to work-your ideas, your energy, your ambition. You'll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. BenefitsABB offers a full range of benefits to help you thrive at work and beyond.More about us ABB Installation Products Division (formerly Thomas Betts) helps manage the connection, protection and distribution of electrical power from source to socket. The Division's products are engineered to provide ease of installation and perform in demanding and harsh conditions, helping to ensure safety and continuous operation for utilities, businesses and people around the world. The Commercial Essentials product segment includes electrical junction boxes, commercial fittings, strut and cable tray metal framing systems for commercial and residential construction. The Premier Industrial product segment includes multiple product lines, such as Ty-Rap cable ties, T&B Liquidtight Systems protection products, PVC coated and nylon conduit systems, power connection and grounding systems, and cable protection systems of conduits and fittings for harsh and industrial applications. The Division also manufactures solutions for medium-voltage applications used in the utility market under its marquee brands including Elastimold™ reclosers and switchgear, capacitor switches, current limiting fuses, Homac™ distribution connectors, Hi-Tech Valiant™ full-range current limiting fuse for fire mitigation, faulted current indicators and distribution connectors, cable accessories and apparatus with products for overhead and underground distribution. Manufacturing includes made-to-stock and custom-made solutions.WE ARE A DRUG-FREE WORKPLACE AND CONDUCT BACKGROUND CHECKS.Equal Employment Opportunity and Affirmative Action at ABBABB is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace.All qualified applicants will receive consideration for employment without regard to their race, creed, color, ancestry, religion, sex, national origin, citizen status, age, sexual orientation, gender identity, disability, marital status, family medical leave status, or protected veterans status. For more information regarding your (EEO) rights as an applicant, please visit the following websites:********************************************************************************************************** *********************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer, applicants may request to review the Affirmative Action Plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************.Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner.Call to ActionBe part of something bigger. This is where progress is powered, teams initiate action, and we move the world forward together. Run What Runs the World. EVP Hashtags (Optional) #ABBCareers #RunwithABB #Runwhatrunstheworld We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

We are seeking multiple Machine Operators for an established manufacturing facility in the Ormond Beach area (off US1). Schedule: Monday thru Friday, 11pm to 7am Experienced Machine Operators will: Make sure the machine is properly set up Create or modify products as needed Safely operate a variety of machines after being cross-trained Skills and Qualifications of the Machine Operator: 1 year of Machine Operator experience REQUIRED Strong attention to detail is REQUIRED, making sure each part is correct. Benefits once hired in! You will receive a raise and shift differential. You also have the opportunity to earn raises more quickly by mastering different machines. Health, Dental, Vision, & Life Insurance PTO 401K with match Employee Assistance Program This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description Machine Operator - Entry Level in DeLand, FL Kelly Services is currently seeking a Machine Operator - Entry Level for one of our top manufacturing clients in DeLand, FL. As a Machine Operator - Entry Level placed with Kelly Services, you will perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule. Our client's fast-paced, team-oriented environment is the perfect place to take your assembly career to the next level. Additional Responsibilities Include: • Perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule • Adhere to plant policies/procedures, department safety rules, Good Manufacturing Practices ISO 13485 regulations and Good Housekeeping procedures. • Complete all pertinent paperwork pertaining to the finished product being produced according to established guidelines in the manufacturing procedures. • Prepare and maintain required maintenance equipment records • Use of micrometers, dial calipers, and other precision measuring instruments to perform dimensional and physical inspections • Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards • Uses ANSI/ASQ Z1.4 sampling standard, part drawings, and specifications to determine inspection and testing required as well as acceptable quality levels • Selects products for inspection evaluation at specified stages in production process, performs various visual, dimensional, performance, mechanical, electrical, or chemical inspections per required characteristics • Report any unusual circumstances to supervisor and perform other miscellaneous duties as assigned • Responsible for the observation of department regulations and to use personal protective equipment (PPE) as required; must be safety conscious and Lockout / Tag out trained. Why Kelly? At Kelly Services , we work with the best. Our clients include 99 of the Fortune 100™ companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. As a Kelly Services candidate you will have access to numerous perks, including: • Kelly-sponsored Affordable Care Act health care coverage available for eligible employees • Group medical, prescription, vision, dental, life, and short-term disability insurance options that are available for purchase-and the coverage is portable* • Service bonus plan • Holiday pay plan • Weekly electronic pay options • Free online training campus available • Exclusive online employee community • Employee assistance program (EAP) available at no cost • Corporate discounts • Transportation spending accounts Apply Today! *Offered and administered by Leslie & Associates. These plans are not sponsored by Kelly Services. Qualifications Job Requirements: • High School Diploma or GED equivalent • Must be highly Mechanical - mechanics, machine repair, machine set up and/or machine maintenance • At least 6 months of experience in machine operator, assembly, inspection or manufacturing Additional Information This position is recruited for by a remote Kelly office, not your local Kelly branch. To be considered for this position, you must submit your resume to jovc833 @kellyservices.com or feel free to call Jeff Dosal at 601-866-6703. Due to the high volume of responses anticipated, only qualified candidates will be contacted.

Can you handle materials safely and efficiently? Are you passionate and do you want to make an impact? If so, begin your new career with TW Metals! Requirements: Be safe Keep your area clean and organized Be willing to learn, training provided Experience operating saws to cut metal Experience operating forklift or side loader High school diploma or general education degree (GED) Committed and comfortable working independently Extra Credit: Deburr; Packing; Export; Receiving; Shipping; PVC M/C; Chop Saw; Band Saw; Plate Saw; Shear M/C; Waterjet; Laser M/C Physical Demands: Position requires standing, sitting, stooping, and kneeling Frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds, with assistance Specific vision requirements include close vision, distance vision, peripheral vision, and depth perception with or without corrected vision The Good Stuff: We invest in our people! $2,000+ per year incentive eligibility; Performance-based bonus; Tuition reimbursement; Generous yearly profit-sharing 401(k) deposit and of course a full comprehensive benefits program. TW Metals, LLC is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will be considered for employment regardless of race, religion, gender, gender identity, sexual orientation, national origin, disability, age, or veteran status. TW Metals is also committed to complying with all fair employment practices regarding citizenship and immigration status. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. *********************** #CB

JOB POSTING JOB TITLE: Machine Operator DEPARTMENT: Manufacturing REPORTS TO: CNC Supervisor PURPOSE OF POSITION: This position is responsible for performing basic machinist duties under supervision. Work with mills and lathes, operate complex machines and perform preventive maintenance of machines. Performs related work ensuring the product meets exacting specifications and standards. EDUCATION & EXPERIENCE: Some experience in metal works preferred. Knowledge of principles and methods for Computer Numerically Controlled (CNC) aided milling and grinding. DESCRIPTION OF JOB DUTIES: Load and run quality approved parts. Check all dimensions and visual aspects of parts as instructed. Maintain an organized work area. Follow directions accurately and consistently. Performs machinist work involving fabrication of specialized parts. Maintains strict tolerance requirements in the manufacture of parts. Conduct preventive maintenance on devices and systems. Records machine data for reporting and record-keeping purposes. Contacts supervisory personnel when raw product, events or finished products are not conforming to required standards. Prepares documents as required to perform inventory or audit. Computes amounts of workload capacity and running time. Confers and corresponds with establishment representatives to rectify problems, such as damages, shortages, and nonconformance to specifications. Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Tracks and uploads appropriate date into MRP program. Perform other duties as assigned by supervisory or management personnel. PHYSICAL REQUIREMENTS: Seeing: Required Speaking: Required Hearing: Required Standing: Frequently Walking: Frequently Sitting: Rarely Lifting: Frequently, up to 75-pounds Carrying: Frequently, up to 75-pounds Pushing: Occasionally Pulling: Occasionally, up to 60-pounds Climbing: Often Balancing: Occasionally Bending: Frequently Twisting: Occasionally Reaching: Frequently Grasping/Handling: Frequently, for dexterity, fine finger handling Stooping/Crouching: Occasionally Kneeling: Occasionally Crawling: Rarely Environmental Conditions: Inside: 90% Outside: 10% Temperature Conditions: Controlled -in Excess of 70-degrees - occasionally Knight Enterprises Management, L.L.C. is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, creed, sex, national origin, age, protected veteran status, disability status, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, or any other protected factor by country, regional or local law. Knight's policies regarding recruitment, hiring, compensation, benefits, promotions, transfers, training and all other personnel matters are free from discriminatory practices and are based on merit, qualifications, and abilities. To view the U.S. Department of Labor's (DOL) Equal Employment Opportunity is the Law poster, please go to the following link: ****************************************************************

Signature Systems Group is hiring multiple Machine Operators for our NIGHT SHIFT. Immediate openings available! Rotating days (4 days per week/ 3 days per week), Shift Differential and THREE weeks of PTO the first year! PM Shift - 6:45PM to 7:00AM (rotating weekends required) Must be able to speak and understand English. You will load and operate machinery to manufacture semi-finished parts (large composite/plastic matting parts) for assembly. Essential duties include: Move parts and materials to and from production or storage areas. Operate, troubleshoot, and optimize equipment for maximum cycle-time efficiency. Conduct quality control checks. Keep work area organized and clean. Qualifications and Requirements: Experience working in a manufacturing or industrial environment preferred. Must be able to lift 50 lbs. Must be able to adapt to environmental changes and working conditions; such as temperature and noise. Must have transportation to and from work. Forklift experience is preferred but not required PM Shift - 6:45PM to 7:00AM (rotating weekends required

Job Description About Clean the World At Clean the World, we believe business can and should be a force for good. Our mission is to reduce waste, protect the planet, and improve lives through sustainability, innovation, and social impact. Through our global operations, we recycle, redistribute, and repurpose hygiene and hospitality products, helping to save lives, reduce waste, and protect our planet. With over a decade of measurable impact, we continue to innovate solutions that align environmental responsibility with business growth. Our Values: Clean the World Genome Our people are united by shared values that define how we work and lead: Boldly Ask Why: We challenge convention to create progress. Driven by Purpose: Our mission drives our growth. Grit Gets It Done: We persevere, adapt, and execute with excellence. CARES: Compassion, Collaboration, Accountability, Respect, Resilience, Excellence, Sustainability. We don't just talk about impact - we deliver it, every day. Why Join Us When you join Clean the World, you join a global community of innovators, dreamers, and doers united by purpose. You'll have the opportunity to: Work with a division that directly drives global growth and sustainability. Be part of an award-winning organization recognized for innovation and social good. Collaborate with a passionate, mission driven team making a measurable impact every day. Thrive in a culture that values creativity, collaboration, and results. Role Machine Operator Recycling is responsible for operating and maintaining Clean the World's soap and plastic recycling lines. This role ensures continuous, efficient, and safe production by operating shredders, dewatering presses, mixers, plodders, cutters, and stampers used in the recycling and reforming of collected materials. The operator will be cross trained across both the soap and plastic recycling processes to maximize production output, ensure product quality, and maintain machine reliability. Key responsibilities (not limited to) Soap Recycling Line · Operate soap recycling equipment including mixers, refiners/plodders, cutters, and stamping machines. · Monitor feedstock consistency and adjust machine settings for optimal throughput and bar quality. · Inspect and maintain soap recycling machinery, ensuring cleanliness and efficiency. · Troubleshoot production issues and perform minor repairs or adjustments as needed. · Maintain accurate production logs and follow daily batch production schedules. · Adhere to quality control and safety procedures during all stages of soap reformation. Plastic Recycling Line · Operate industrial shredders and dewatering screw presses to process collected plastic bottles and containers. · Monitor feed material for contamination and ensure consistent flow through the system. · Adjust machine parameters to achieve optimal liquid removal and throughput. · Perform routine cleaning and preventive maintenance to ensure reliable operation. · Record output metrics, moisture levels, and system performance data. · Ensure proper handling and staging of processed plastic for downstream recycling partners. Qualifications Education: High school diploma / GED Experience : 3+ years of experience in a manufacturing, recycling, or processing environment. Experience operating extruders, plodders, shredders, or other continuous-feed processing equipment. Identify and correct machine performance issues. Ability to perform routine equipment maintenance, part replacement, and minor repairs. Understanding of production safety protocols and lockout/tagout procedures. Demonstrated ability to meet production goals while maintaining product quality. Comfortable working in industrial environments with heat, noise, and moving equipment. Excellent teamwork, communication, and documentation skills. Ability to lift up to 50 lbs and stand for extended periods. Willingness to cross-train and operate both soap and plastic recycling lines as needed.

**_What Product Test and Calibration contributes to Cardinal Health_** Product Test & Calibration sets up, aligns, monitors, and/or calibrates production equipment. Assists and may perform maintenance on machines and cleans up minor chemical spills in assigned area as well as glassware, ovens, and other equipment. **_Job Description_** The primary purpose of this position is to set-up, maintain, operate, test and inspect product, and perform repairs on associated departmental equipment in conformance to FDA, GMP's, ISO 13485 standards and finished product specifications. Minimize scrap generation from processes and promote workplace safety. Provide process information to management so production equipment may be optimized and/or process corrected. Assist with training of personnel to perform various functions within each assigned area. Facilitate work flow and ensure product quality is maintained. **_Shift Details_** + 3:00 pm to 11:00 pm - Monday through Friday **_Accountabilities_** + Perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule. + Adhere to plant policies/procedures, department EHS rules, Good Manufacturing Practices (GMP's), ISO 13485 regulations and Good Housekeeping procedures. Shall operate in a manner that protects the health and safety of its employees/visitors and operate in a manner that conserves energy, natural resources and protects the environment. + Complete all pertinent paperwork pertaining to the finished product being produced according to established guidelines in the manufacturing procedures. + Prepare and maintain required maintenance equipment records. Use of micrometers, dial calipers, and other precision measuring instruments to perform dimensional and physical inspections. Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards. + Uses ANSI/ASQ Z1.4 sampling standard, part drawings, and specifications to determine inspection and testing required as well as acceptable quality levels. + Selects products for inspection evaluation at specified stages in production process, performs various visual, dimensional, performance, mechanical, electrical, or chemical inspections per required characteristics. + Report any unusual circumstances to supervisor and perform other miscellaneous duties as assigned. + Basic computer skills with windows based programs. + Responsible for the observation of department regulations and to use personal protective equipment (PPE) as required; must be safety conscious and Lockout/Tag-out trained. + Transport hazardous waste to accumulation areas. Complete Annual Hazardous Waste (RCRA) refresher training. + Cross-train and support where needed throughout the facility. **_Qualifications_** + High School Diploma or GED preferred. One year certificate from college or technical school (machinist, engineering technology); or equivalent combination of training and experience. + 3-4 years medical device manufacturing related experience or equivalent combination of training and experience preferred. **_What is expected of you and others at this level_** + Applies basic skills and techniques to complete routine tasks within assigned area + Maintains appropriate licenses/training/certifications + Works on basic and routine assignments + Works within clearly defined Standard Operating Procedures and/or scientific methods + Adheres to all quality guidelines + Works under close supervision. All work is reviewed for accuracy + Any deviation from the norm is approved by the supervisor before proceeding **_Department Specific Functions_** + Setup various production machines and ancillary equipment according to procedures and product specifications utilizing small hand tools, i.e. wrenches, pliers, screwdrivers, drills and channel locks. + Monitor machinery and process goals during shift and make adjustments as necessary to ensure optimum performance of processes. + Diagnose and troubleshoot equipment malfunction and either repair equipment or arrange for technical support to complete repairs. **Pay rate:** $17.75 per hour (includes shift differential) **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 12/24/2025 *if interested in opportunity, please submit application as soon as possible. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Production Supervisor Your Role and Responsibilities At ABB, we help important industries outrun - leaner and cleaner. In this role you will: Must complete all required mandatory Safety, OSHA, and ISO 9001 training Reads work instructions to determine job specifications, machine adjustments, and material requirements. Learns to follow quality plans, read and apply work instructions, and blueprints to determine job specifications and material requirements. Learns to measure work piece dimensions to determine accuracy of machine operation using dial calipers, snap gauges or micrometers. Operator initiates simple machine cycles/ manufacturing processes. Qualifications for the Role High School Diploma/GED required. Previous manufacturing experience desired. Manual dexterity and mechanically inclined. Basic understanding of computer-based machine controls. Must have basic manufacturing/quality knowledge and be able to use simple measuring devices. Able to follow quality plans and work instructions. Able to use common tools of machine operations. What's in it for you? We want you to bring your full self to work-your ideas, your energy, your ambition. You'll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. Benefits ABB offers a full range of benefits to help you thrive at work and beyond. More about us ABB Installation Products Division (formerly Thomas Betts), helps manage the connection, protection and distribution of electrical power from source to socket. The Division's products are engineered to provide ease of installation and perform in demanding and harsh conditions, helping to ensure safety and continuous operation for utilities, businesses and people around the world. The Commercial Essentials product segment includes electrical junction boxes, commercial fittings, strut and cable tray metal framing systems for commercial and residential construction. The Premier Industrial product segment includes multiple product lines, such as Ty-Rap cable ties, T&B Liquidtight Systems protection products, PVC coated and nylon conduit systems, power connection and grounding systems, and cable protection systems of conduits and fittings for harsh and industrial applications. The Division also manufactures solutions for medium-voltage applications used in the utility market under its marquee brands including Elastimold™ reclosers and switchgear, capacitor switches, current limiting fuses, Homac™ distribution connectors, Hi-Tech Valiant™ full-range current limiting fuse for fire mitigation, faulted current indicators and distribution connectors, cable accessories and apparatus with products for overhead and underground distribution. Manufacturing includes made-to-stock and custom-made solutions. WE ARE A DRUG-FREE WORKPLACE AND CONDUCT BACKGROUND CHECKS. Equal Employment Opportunity and Affirmative Action at ABB ABB is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, creed, color, ancestry, religion, sex, national origin, citizen status, age, sexual orientation, gender identity, disability, marital status, family medical leave status, or protected veterans status. For more information regarding your (EEO) rights as an applicant, please visit the following websites: **************************************************************** ****************************************** *********************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer, applicants may request to review the Affirmative Action Plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. Call to Action Be part of something bigger. This is where progress is powered, teams initiate action, and we move the world forward together. Run What Runs the World. EVP Hashtags #ABBCareers #RunwithABB #Runwhatrunstheworld We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description Machine Operator - Entry Level in DeLand, FL Kelly Services is currently seeking a Machine Operator - Entry Level for one of our top manufacturing clients in DeLand, FL. As a Machine Operator - Entry Level placed with Kelly Services, you will perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule. Our client's fast-paced, team-oriented environment is the perfect place to take your assembly career to the next level. Additional Responsibilities Include: • Perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule • Adhere to plant policies/procedures, department safety rules, Good Manufacturing Practices ISO 13485 regulations and Good Housekeeping procedures. • Complete all pertinent paperwork pertaining to the finished product being produced according to established guidelines in the manufacturing procedures. • Prepare and maintain required maintenance equipment records • Use of micrometers, dial calipers, and other precision measuring instruments to perform dimensional and physical inspections • Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards • Uses ANSI/ASQ Z1.4 sampling standard, part drawings, and specifications to determine inspection and testing required as well as acceptable quality levels • Selects products for inspection evaluation at specified stages in production process, performs various visual, dimensional, performance, mechanical, electrical, or chemical inspections per required characteristics • Report any unusual circumstances to supervisor and perform other miscellaneous duties as assigned • Responsible for the observation of department regulations and to use personal protective equipment (PPE) as required; must be safety conscious and Lockout / Tag out trained. Why Kelly? At Kelly Services , we work with the best. Our clients include 99 of the Fortune 100™ companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. As a Kelly Services candidate you will have access to numerous perks, including: • Kelly-sponsored Affordable Care Act health care coverage available for eligible employees • Group medical, prescription, vision, dental, life, and short-term disability insurance options that are available for purchase-and the coverage is portable* • Service bonus plan • Holiday pay plan • Weekly electronic pay options • Free online training campus available • Exclusive online employee community • Employee assistance program (EAP) available at no cost • Corporate discounts • Transportation spending accounts Apply Today! *Offered and administered by Leslie & Associates. These plans are not sponsored by Kelly Services. Qualifications Job Requirements: • High School Diploma or GED equivalent • Must be highly Mechanical - mechanics, machine repair, machine set up and/or machine maintenance • At least 6 months of experience in machine operator, assembly, inspection or manufacturing Additional Information This position is recruited for by a remote Kelly office, not your local Kelly branch. To be considered for this position, you must submit your resume to jovc833 @kellyservices.com or feel free to call Jeff Dosal at 601-866-6703. Due to the high volume of responses anticipated, only qualified candidates will be contacted.

What Assembly contributes to Cardinal Health Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications. Job Summary The purpose of this position is to operate, supply, sample and record movement of materials associated with production machinery and ancillary equipment in conformance to FDA, GMP's, ISO13485 standards, and finished product specifications; sample and inspect production, stage material accordingly and report production accuracy; monitor manufacturing process quality to assure that only acceptable materials are released to subsequent production processes. This is accomplished through statistical sampling and inspection which allows detection of changes in product quality so that corrective action is initiated. Clean and maintain work areas within the facility as assigned following standard operating procedures. Responsibilities * Analyze product utilizing established test methods and gages and initiate corrective action with supervisor, department technical resources, and quality assurance inspectors. * Perform requisite sampling and inspection of product in accordance with established department and plant procedures. * Responsible for quality and quantity of production from assigned machines. * Monitor machinery and processes during shift and request department technical assistance; make adjustments as necessary to ensure optimum performance of process. * Report and track all production data into the appropriate information systems. * Must be proficient with all measuring equipment i.e. micrometers, gages, etc. * Demonstrate an understanding of the lean system and the ability to control the correct location of associated Kanban tickets. * Assist/perform changeovers as required. Qualifications * High School Diploma or GED preferred * 1-3 years related work experience and/or training preferred What is expected of you and others at this level * Applies acquired knowledge and skills to complete standard tasks * Readily learns and applies new information and methods to work in assigned area * Maintains appropriate licenses, training and certifications * Works on routine assignments that require some problem resolution * Works within clearly defined standard operating procedures and/or scientific methods * Adheres to all quality guidelines * Works under moderate degree of supervision * Work typically involves regular review of output by work lead or supervisor * Refers complex unusual problems to supervisor Pay rate: $17.00 per hour Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. * Medical, dental and vision coverage * Paid time off plan * Health savings account (HSA) * 401k savings plan * Access to wages before pay day with my FlexPay * Flexible spending accounts (FSAs) * Short- and long-term disability coverage * Work-Life resources * Paid parental leave * Healthy lifestyle programs Application window anticipated to close: 2/7/2026 *if interested in opportunity, please submit application as soon as possible. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.