Press operator jobs in The Villages, FL

This is the first step in manufacturing aluminum trailers. Must recognize and be conscious of quality, tolerance and accuracy of finished parts. Will operate ( brake press, benders, saws, belt sanders, CNC milling centers, and a shear ) in order to fill job orders. Will deburr, blow out all parts, stack and band all finished parts. Will operate and maintain set ups on special purpose machines where operations may involve several progressive machining sequences, and will give instructions on operating procedures. Requires complete knowledge of machine shop operations as acquired by on-the-job training and experience. Operation responsibility includes but are not limited to verifying blueprints, 1st piece inspections, proper measurements, safety of equipment operator is using, accurate count of parts and proper documentation on job orders. The work is repetitive and subject to processes inspection. Position Duties: Reads job order and blueprint specifications. Set up machinery for jobs to run efficiently with all parts checked to blueprint and job order. Operate machinery efficiently while maintaining 1st piece inspection on all parts, all 1st piece inspections are checked to the job order and blueprint. Demonstrate timely communication of needed materials. Responsible for the safety of the equipment he/she is using. Responsible for notifying supervisor of any and all repairs needed. Recognize obvious defective or damaged parts, incorrect sizes, faulty workmanship and general quality. Double check job order to finished part. Must be able to follow directives and procedures and complete paperwork. Ensure no material is used or moved unless it has a part number on it. All counts must be consistently accurate. Work area must be maintained as clean and organized. Work in compliance with all safety, quality and housekeeping standards in accordance with company policies. Performs other duties as assigned by management. Required Education: A high school and/or GED is preferred. Must be able to read tape measure and follow a job order. Good math skills are required, must be able to give accurate counts. Must pass a measuring test. Must be able to read blueprints, must pass a blueprint reading test with 85% accuracy or higher. Good verbal and written communication skills are required, must have legible penmanship. Training: Requires a fundamental knowledge of machine shop operations as required by short job training and experience. Must have some direct experience setting up some or all of the machines, brake press, punch press, drill press, benders, saws, belt sanders, shear, and CNC milling centers. Prefer direct experience instructing others and working as part of a team. Qualifications: Physically fit to perform lifting assignments with a weight limit of no more than 40lbs. Must be able to read blueprints and job orders within 90 days of start date. Job Type: Full-time 10 hour 4 days a week Benefits: 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Referral program Retirement plan Vision insurance Experience: CNC milling machine: 1 year (Preferred)

Job DescriptionMake Precision Happen in Lake Mary, FL Step into a day where accuracy and craftsmanship define everything you do. As our CNC Turret Punch Press Operator, you'll shape components that meet tight specifications and elevate our production quality. If you love machines, problem‑solving, and the rhythm of well-tuned operations, you'll thrive here. A Day in the Role You arrive to a clean, organized workstation, review your traveler and blueprints, and begin setting up the punch press for the first run. Throughout your shift, you: Configure and operate punch equipment to produce precise parts that meet exacting specs. Continuously observe machine performance, adjusting feeds, tools, and parameters to maintain quality standards. Perform routine maintenance and troubleshoot mechanical or process issues to minimize downtime. Inspect outputs with a critical eye, identify defects, and correct variances on the spot. Keep your area spotless and safe, following established safety practices at all times. Coordinate with teammates to improve processes, throughput, and overall efficiency. Record production metrics and promptly escalate concerns to your supervisor. What You Bring High school diploma or equivalent; machinist or technical training is a plus. Experience in punch press operations or a related manufacturing position preferred. Sharp attention to detail and the discipline to follow precise work instructions. Solid mechanical aptitude with troubleshooting know-how. Comfort working both independently and with a team in a fast-paced setting. Clear communication skills and a can-do outlook. Flexibility to work additional hours/overtime when production needs arise. Skills You're Confident In Equipment troubleshooting and root-cause analysis General and mechanical troubleshooting OSHA 10-Hour Certification (OSHA 10) Setting up machines for production runs Reading and interpreting blueprints Tools & Technologies You'll Use CNC Lathe (2-4 axis) Press Brake Location Lake Mary, FL

Wilbert Funeral Services, Inc. As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. The Wilbert Group is part of Marmon Holdings, Inc. A Berkshire Hathaway Company. The Wilbert Group is a leading precast concrete manufacturer and service provider, catering to the funeral service, building trades, and agricultural sectors. Our comprehensive range of top-tier concrete offerings encompasses burial vaults, monuments, lawn crypts, columbarium niches, septic tanks, retaining walls, storm shelters, and agricultural precast products. Based on the diverse offerings, a wide range of rolling assets are required ranging from forklifts, construction equipment, trailers, light, medium and heavy-duty vehicles. Operating from numerous manufacturing plants, warehouses, monument production facilities, a casket manufacturing plant, we are dedicated to delivering unparalleled products and services. * Learn and become proficient in all aspects of manufacturing, including operating mixers, stripping products from forms, cleaning and oiling forms, applying Unidex bonding mixture and butyl seal, and placing concrete in forms. * Cut and bend rebar and wire for reinforcement purposes. * Perform minor repairs to forms and other related equipment in the manufacturing process as needed. * Utilize various hand tools required for manufacturing tasks. * Ensure that the casting forms have clean and straight edges to produce visually appealing products. * Stock products from the previous day after applying a clear seal to the outside of the vaults. * Retrieve aged products from stock and paint them for the next day's orders. Qualifications: * GED & High School Diploma * Possession of a valid driver's license with a clean driving record. * Ability to pass a new hire drug test and undergo random drug screens. * Capability to lift 75+ lbs. * Proficiency in reading maps and understanding directions. * Strong attention to detail Physical Requirements: * Physical requirements include lifting, standing, bending, stooping, twisting, turning, kneeling, and squatting for short periods. What we provide * Career advancement. * Medical, dental, and vision insurance after 60 days of employment. * HSA participation after 60 days of employment with a company match. * 401k participation after 90 days of employment with a company match. * Company-paid Life Insurance and Short-Term Disability. * Safety Shoe and Tuition Reimbursement. * Six paid holidays per year. * One week of paid vacation after 6 months of employment. * Evaluation with possible merit increase after 90 days of employment. * Yearly performance reviews. * Referral bonus of up to $600 Job Type: Full-time Pay: From $17.00 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Health savings account * Life insurance * Paid time off * Referral program * Retirement plan * Tuition reimbursement * Vision insurance Schedule: * 8 hour shift * Monday to Friday * Overtime Experience: * Concrete finishing: 1 year (Preferred) * Concrete forming: 1 year (Preferred) * Concrete pumping: 1 year (Preferred) * People with a criminal record are encouraged to apply Work Location: In person NOTE: This job description is not intended to be all-inclusive. A partner may perform other related duties as negotiated to meet the ongoing needs of the organization. Pay Range: 17.60 - 26.40 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Job Description If you are one of the best, come work for the best! Speedy Concrete Cutting - The best trucks, the best equipment, the best people, and the best workplace in the industry. Speedy Concrete Cutting Inc. is the premier concrete sawing and drilling contractor for the Southeast U.S., and we are currently hiring experienced operators to join our team of industry leading professionals! Concrete Cutting Operators will average 50-55 hours/week and can earn $75,000+ in the first year! PLEASE COPY AND PASTE THIS LINK TO APPLY ON OUR WEBSITE: speedycon.com/careers Qualifications: Minimum 2 years' as a professional sawing and drilling operator Valid driver's license Safety-minded Benefits: Excellent health benefits including dental, vision and life insurances 401K retirement match Short and long term disability insurance Safety and Holiday bonuses Job security & full time hours The best company culture in the business! Related Skills and Tooling: Wire saw, Core Drill, Slab Saw, Wall Saw, Hand Saw, Brokk Demolition Robot, GPR Scanning, Concrete Breaking, construction After submitting your application online, call our office to discuss your application at **************. We are a Drug-Free Workplace. Find out more at *****************

Responsible for operating press brake on machine. Fits and fabricates structural steel, completes layout, and inspects finished product. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Operates press break machine using all safety equipment and following all required procedures Runs bend and forming operations using standard and custom punches. Uses a CNC controller to input information into machine. Adjusts ram and back gauge locations per process control instructions and blueprints. Checks height, depth and thickness using micrometers, dial indicators, calipers, gauges and other precision-measuring instruments. Performs complex programming using all features of the press brake. Works with tight tolerances. Configures bend allowances for sheet metal (stainless, aluminum & regular steel). Checks machine for defects and repair if necessary. Ensures machine is calibrated and cleaned. Reads drawings and blueprints. Produces parts for assembly operations. Meets customer specifications and delivery requirements. Programs the CNC to produce new parts meeting specifications. Performs spot inspections of parts. Performs all required routine and minor maintenance activities according to procedures. Complete and maintains required paperwork. Performs other duties as assigned. KPI'S (Examples but not limited to) SAFETY Documented Instances (Positive: Notifying about potential hazards/Negative: Not following documented procedures or adding to potential risk) QUALITY Documented Instances (Internal/External) Sheet Efficiency ON TIME DELIVERY (OTD) 95% OTD or high per Production Order Delivery Date PRODUCTIVITY Efficiency (100%) - To reduce total labor time. Discussions should occur if time estimate is considered too low. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE High School diploma or GED preferred. Must have basic computer skills. 1 year of experience minimum preferred LANGUAGE SKILLS Ability to read, write, comprehend and convey simple instructions. MATHEMATICAL SKILLS Ability to add and subtract two-digit numbers. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms;

**_What Product Test and Calibration contributes to Cardinal Health_** Product Test & Calibration sets up, aligns, monitors, and/or calibrates production equipment. Assists and may perform maintenance on machines and cleans up minor chemical spills in assigned area as well as glassware, ovens, and other equipment. **_Job Description_** The primary purpose of this position is to set-up, maintain, operate, test and inspect product, and perform repairs on associated departmental equipment in conformance to FDA, GMP's, ISO 13485 standards and finished product specifications. Minimize scrap generation from processes and promote workplace safety. Provide process information to management so production equipment may be optimized and/or process corrected. Assist with training of personnel to perform various functions within each assigned area. Facilitate work flow and ensure product quality is maintained. **_Shift Details_** + 3:00 pm to 11:00 pm - Monday through Friday **_Accountabilities_** + Perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule. + Adhere to plant policies/procedures, department EHS rules, Good Manufacturing Practices (GMP's), ISO 13485 regulations and Good Housekeeping procedures. Shall operate in a manner that protects the health and safety of its employees/visitors and operate in a manner that conserves energy, natural resources and protects the environment. + Complete all pertinent paperwork pertaining to the finished product being produced according to established guidelines in the manufacturing procedures. + Prepare and maintain required maintenance equipment records. Use of micrometers, dial calipers, and other precision measuring instruments to perform dimensional and physical inspections. Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards. + Uses ANSI/ASQ Z1.4 sampling standard, part drawings, and specifications to determine inspection and testing required as well as acceptable quality levels. + Selects products for inspection evaluation at specified stages in production process, performs various visual, dimensional, performance, mechanical, electrical, or chemical inspections per required characteristics. + Report any unusual circumstances to supervisor and perform other miscellaneous duties as assigned. + Basic computer skills with windows based programs. + Responsible for the observation of department regulations and to use personal protective equipment (PPE) as required; must be safety conscious and Lockout/Tag-out trained. + Transport hazardous waste to accumulation areas. Complete Annual Hazardous Waste (RCRA) refresher training. + Cross-train and support where needed throughout the facility. **_Qualifications_** + High School Diploma or GED preferred. One year certificate from college or technical school (machinist, engineering technology); or equivalent combination of training and experience. + 3-4 years medical device manufacturing related experience or equivalent combination of training and experience preferred. **_What is expected of you and others at this level_** + Applies basic skills and techniques to complete routine tasks within assigned area + Maintains appropriate licenses/training/certifications + Works on basic and routine assignments + Works within clearly defined Standard Operating Procedures and/or scientific methods + Adheres to all quality guidelines + Works under close supervision. All work is reviewed for accuracy + Any deviation from the norm is approved by the supervisor before proceeding **_Department Specific Functions_** + Setup various production machines and ancillary equipment according to procedures and product specifications utilizing small hand tools, i.e. wrenches, pliers, screwdrivers, drills and channel locks. + Monitor machinery and process goals during shift and make adjustments as necessary to ensure optimum performance of processes. + Diagnose and troubleshoot equipment malfunction and either repair equipment or arrange for technical support to complete repairs. **Pay rate:** $17.75 per hour (includes shift differential) **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 12/24/2025 *if interested in opportunity, please submit application as soon as possible. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Advanced Drainage Systems is a leading manufacturer of stormwater and onsite septic wastewater solutions, committed to sustainability and innovation. With a vast manufacturing and distribution network, we deliver high-quality products across multiple industries while recycling over half a billion pounds of plastic annually. At ADS, we foster a culture where diverse perspectives drive better ideas, ensuring every employee feels valued, heard, and empowered to make an impact. Responsibilities A Line Operator is responsible for performing and maintaining the daily activities associated with a production line. This includes housekeeping, safety, quality, maintaining production efficiencies, repair and maintenance and minimizing downtime. This position requires the flexibility to work 40+ hours per week and weekends as required. Ability to work varying shifts is also required due to equipment changeovers. This position requires the flexibility to work 40+ hours per week and weekends as required. The responsibilities of this position include, but are not limited to: Embraces a culture of safety Manages a plastic extrusion line to ensure finished goods meet quality specifications that meet customer needs Utilizes standard operating procedures to ensure the production line is running with specifications Leads with line tooling changes, start-ups and shutdowns Maintains a safe work environment through practicing proper PPE and housekeeping compliance. Accurately completes shift production and reporting paperwork. Conducts regular product sampling to ensure consistent quality Assist with Preventative Maintenance program Meets or exceeds standard production efficiencies on all production lines. Maintains and increases ability to operate various production lines through certifications Troubleshoot process and mechanical problems and perform repairs and adjustments to meet production needs as required. Perform tooling changeovers in a safe and efficient manner Maintain a safe working environment that includes the consistent use of Personal Protection Equipment to ensure your safety Practice continuous improvement which not only includes the line but also facility housekeeping Job Skills: This position should possess the following skills/knowledge: Mechanical troubleshooting and repair abilities. Basic computer skills. Analytical thinking and problem-solving skills Ability to operate heavy machinery, i.e. forklifts, in a safe manner Reading and Writing skills Self-motivated Educational Requirements: High School Diploma or equivalent. Preferred Experience: Previous manufacturing machine operation or extrusion experience Physical Requirements: Ability to perform physical labor for extended periods of time in fluctuating temperatures. Position requires full range of body motion including twisting, bending, reaching, squatting and ability to mount/dismount industrial equipment and vehicles. Ability to stand and be mobile throughout a shift. Ability to use hands, arms and legs to physically handle and transport finished goods. Benefits: We offer a competitive salary and an excellent benefits program including: Medical Dental Vision Retirement Plan Paid Holidays/ Vacation Days And much more Company Benefits: Health & Welfare Benefits: Medical and prescription drug plans, telemedicine (with medical plan), dental and vision plans, virtual physical therapy*, an employee assistance program (EAP)*, and voluntary accident, critical illness, and hospital indemnification programs. Financial Benefits: Retirement 401k program with company match, an employee stock purchase plan (voluntary), financial wellness planning*, paid parental leave*, flexible spending accounts (FSA) for child care and health care, short-term and long-term disability*, basic life insurance, accidental death and dismemberment (AD&D)*, adoption financial reimbursement*, tuition reimbursement*, voluntary life insurance (for employees, spouses, and children), and voluntary identity theft and fraud protection. *100% paid by ADS. Why Join ADS? Growth Opportunities & Global Presence: With a global network of approximately 70 manufacturing plants and 40 distribution centers, ADS offers extensive opportunities for career growth and development in various locations around the world. Inclusive and Creative Work Culture: ADS fosters a culture of passion, innovation, and continuous improvement, empowering employees to shape industry-leading solutions. We value diverse perspectives, recognizing that they drive better ideas, processes, and performance. Our workplace is built on respect, inclusivity, and shared responsibility, ensuring every team member feels valued and contributes to our collective success. Innovative & Sustainability Focused: Advanced Drainage Systems is one of the largest plastic recyclers in North America, ensuring over half a billion pounds of plastic is kept out of landfills every year. Learn More: ******************************** EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Advanced Drainage Systems is a leading manufacturer of stormwater and onsite septic wastewater solutions, committed to sustainability and innovation. With a vast manufacturing and distribution network, we deliver high-quality products across multiple industries while recycling over half a billion pounds of plastic annually. At ADS, we foster a culture where diverse perspectives drive better ideas, ensuring every employee feels valued, heard, and empowered to make an impact. Responsibilities A Line Operator is responsible for performing and maintaining the daily activities associated with a production line. This includes housekeeping, safety, quality, maintaining production efficiencies, repair and maintenance and minimizing downtime. This position requires the flexibility to work 40+ hours per week and weekends as required. Ability to work varying shifts is also required due to equipment changeovers. This position requires the flexibility to work 40+ hours per week and weekends as required. The responsibilities of this position include, but are not limited to: Embraces a culture of safety Manages a plastic extrusion line to ensure finished goods meet quality specifications that meet customer needs Utilizes standard operating procedures to ensure the production line is running with specifications Leads with line tooling changes, start-ups and shutdowns Maintains a safe work environment through practicing proper PPE and housekeeping compliance. Accurately completes shift production and reporting paperwork. Conducts regular product sampling to ensure consistent quality Assist with Preventative Maintenance program Meets or exceeds standard production efficiencies on all production lines. Maintains and increases ability to operate various production lines through certifications Troubleshoot process and mechanical problems and perform repairs and adjustments to meet production needs as required. Perform tooling changeovers in a safe and efficient manner Maintain a safe working environment that includes the consistent use of Personal Protection Equipment to ensure your safety Practice continuous improvement which not only includes the line but also facility housekeeping Job Skills: This position should possess the following skills/knowledge: Mechanical troubleshooting and repair abilities. Basic computer skills. Analytical thinking and problem-solving skills Ability to operate heavy machinery, i.e. forklifts, in a safe manner Reading and Writing skills Self-motivated Educational Requirements: High School Diploma or equivalent. Preferred Experience: Previous manufacturing machine operation or extrusion experience Physical Requirements: Ability to perform physical labor for extended periods of time in fluctuating temperatures. Position requires full range of body motion including twisting, bending, reaching, squatting and ability to mount/dismount industrial equipment and vehicles. Ability to stand and be mobile throughout a shift. Ability to use hands, arms and legs to physically handle and transport finished goods. Benefits: We offer a competitive salary and an excellent benefits program including: Medical Dental Vision Retirement Plan Paid Holidays/ Vacation Days And much more Company Benefits: Health & Welfare Benefits: Medical and prescription drug plans, telemedicine (with medical plan), dental and vision plans, virtual physical therapy*, an employee assistance program (EAP)*, and voluntary accident, critical illness, and hospital indemnification programs. Financial Benefits: Retirement 401k program with company match, an employee stock purchase plan (voluntary), financial wellness planning*, paid parental leave*, flexible spending accounts (FSA) for child care and health care, short-term and long-term disability*, basic life insurance, accidental death and dismemberment (AD&D)*, adoption financial reimbursement*, tuition reimbursement*, voluntary life insurance (for employees, spouses, and children), and voluntary identity theft and fraud protection. *100% paid by ADS. Why Join ADS? Growth Opportunities & Global Presence: With a global network of approximately 70 manufacturing plants and 40 distribution centers, ADS offers extensive opportunities for career growth and development in various locations around the world. Inclusive and Creative Work Culture: ADS fosters a culture of passion, innovation, and continuous improvement, empowering employees to shape industry-leading solutions. We value diverse perspectives, recognizing that they drive better ideas, processes, and performance. Our workplace is built on respect, inclusivity, and shared responsibility, ensuring every team member feels valued and contributes to our collective success. Innovative & Sustainability Focused: Advanced Drainage Systems is one of the largest plastic recyclers in North America, ensuring over half a billion pounds of plastic is kept out of landfills every year. Learn More: ******************************** EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Job DescriptionBenefits: 10 Hour Work Shift 4 day work week Mon-Thurs 401(k) 401(k) matching Bonus based on performance Company parties Dental insurance Health insurance Paid time off Vision insurance Wellness resources Position Summary: Responsible for 1-2 sewing operations, or 1-2 bartack operations, or 1-2 assembly operations or any combination thereof by utilizing excellent, in-depth knowledge of company products, work instructions and procedures. Essential Duties and Responsibilities Follows Production drawings and work instructions to perform operations. Must understand canopy familiarization. Achieves time standards to learning curve. Meets all quality requirements, efficiency goals, and production schedule. Understands and utilizes the Lean & Cellular Manufacturing process for the continuous improvement of product, quality, efficiency, scrap reduction, safety, and ergonomics. Follows all safety rules and has basic understanding of machine operations where applicable. Performs preventive maintenance by keeping machine clean, blown out, and oiled. Wears safety glasses when using air hose to clean out machines. Must understand role in Kanban priority responsibility. Completes required production paperwork and barcode activity accurately. Performs self-inspection of all work and performs own rework as required. Keeps area clean and neat. Must be able to read First Piece canopy packages, Engineering Bulletins or Design Summary packages to familiarize on product. Performs other inherent duties related, but not limited, to the above. Education and Experience Requirements High School diploma or GED Equivalent required Previous sewing experience preferred, but not required Knowledge, Skills, and Abilities Must pass certifications of assigned operations. Must be capable of learning to operate a sewing machine. Must be able to read ruler measurements and possess self-inspection skills. Must be able to read, understand and follow written Standard Operating Procedure Specifications that are written in the English language. Physical Requirements Finger, hand and arm dexterity crucial for sewing canopy parts. Visual acuity necessary for seeing match marks and determine good versus poor stitch quality. Ability to lift materials weighing up to 50 pounds. Must have legible handwriting to complete required documentation. Must be able to sit, stand, bend and lift for extended periods of time depending on job task The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Pioneer Welding & Fabrication is seeking a detail-oriented Steel Saw Operator for the 2nd shift (3:30 PM - 12:00 AM). The Steel Saw Operator is responsible for safely and efficiently operating saw equipment to cut and prepare steel and metal materials for fabrication. This role requires strong technical skills, attention to detail, and adherence to safety and production standards. Only PTO is offered as a benefit at this time. Key Responsibilities Set up, calibrate, and operate band saws, circular saws, and other cutting equipment to process steel and metal materials according to job specifications and technical drawings. Read and interpret blueprints, schematics, and work orders to determine precise cutting measurements and tolerances. Inspect incoming materials and completed parts for accuracy, ensuring all finished work meets specified dimensions and quality standards. Perform routine maintenance tasks on saw equipment, such as cleaning, lubricating, and basic troubleshooting; report any malfunctions promptly. Handle and move raw materials and finished components, using overhead cranes or forklifts as required, and follow all safety protocols. Maintain a clean, organized, and safe work environment, complying with company and OSHA safety standards. Accurately complete daily production logs and other required documentation. Qualifications and Requirements High school diploma or GED required. One to three years of experience operating saws or working in a metal manufacturing environment is preferred. Entry-level applicants with a strong work ethic may be considered; on-the-job training is available. Ability to read and interpret blueprints and technical drawings. Proficiency in basic math, measurements, and inspection techniques. Familiarity with metal cutting equipment and safety procedures in a manufacturing setting. Physical ability to lift and move up to 70 pounds. Availability to work the 2nd shift and overtime as needed. Consistent, reliable attendance and punctuality. Compensation The hourly wage for this position is $15 to $17 per hour, based on experience and skill level. This rate is competitive within the Central Florida region and reflects current industry standards for Metal Saw Operators as of July 2025 (ZipRecruiter, 2025). How to Apply Applicants should submit a resume with relevant experience and references. Pioneer Welding & Fabrication is an equal opportunity employer. Applications are accepted until the position is filled.

Job Description Duties/Responsibilities: include the following. Other duties may be assigned. • Will complete appropriate paperwork when needed including necessary checklist • Receive verbal or written instructions from the Supervisor • Operate the appropriate machine by installing and removing tooling, sizing and/or running a winding process, setting concentricity and installing proper reinforcement, etc. • Assist in line start up, monitor all extruder controls during production and maintain feed stock continuously • Handle hose production process and constantly inspect hose for defects • Assist in any other area on line start up as needed and also in line shutdown. Will report any irregularities in equipment to Team Lead or Maintenance • Observe all safety rules and report any unsafe working condition to the Supervisor or other appropriate personnel. • Follow all company regulations and procedures • Assist in yarn rewind • Assist in training as needed Required Skills/Abilities: • Good verbal and written communication skills. • Ability to listen, understands, and follows directions. • Ability to work in a variety of roles. • Must know basic math • Must be able to read Gauges and tape Measure Education and Experience: • Previous experience in Manufacturing, extrusion, winding preferred. • High school diploma or equivalent required • Basic Computer

Job Description We are looking for a Machine Operator to join our team! To Apply: Click on the “apply” button to get started or apply in-person (9070 Old Cobb Rd, Brooksville, FL 34601)! What We Offer: Work in a team-oriented environment where collaboration is a priority. Achieve your professional goals without sacrificing the balance between work and life. A comprehensive benefits package with options to choose what works best for you and your family. About the Role: As a Machine Operator with (Your Company) you are responsible for: Safe Operation and Maintenance of a Sophisticated, Computerized, Manufacturing Machine Reporting All Needed Information to the Plant Manager Using Equipment and Tools to Manufacturing Specifications Taking Variety of Measurements to Monitor Process and Ensure Quality Production Machine Maintenance and Set-Up Cleaning the Machinery Operating a Forklift We Require: A Minimum of 1 Year of Manufacturing Experience. You Must Have Strong Mechanical Aptitude and Trouble-shooting Skills. A Working Knowledge of Electrical, Hydraulic, Power, Transmission, Pneumatic, and Control Systems. *Your offer may be contingent upon passing a drug test and physical exam for this role.*

Job DescriptionDescription: At Spartronics - We build products lives depend on! We offer our employees a Full benefits package that includes Medical, Dental, Vision, PTO, 8 Paid Holidays, 401k (with company match), Long and short term disability, Life Insurance. Spartronics has been and will continue to be a leading manufacturer of electronics for Aero-space & Defense here in Brooksville for over 40 years! Our company & facility provide great benefits combined with over 150,000 square feet of state of climate controlled work space. Why Join Us: When you become a part of Spartronics, you're joining a team of dedicated and talented, individuals who share a common goal - to win as one. We value talent, innovation, and a hunger for growth. Here, you'll have the opportunity to work with industry leaders in Aerospace & Defense, Medical & Life Science, and Industrial markets where our customers put full trust in us to deliver the most complex, highly regulated products that have to work the first time, every time. Working Hours: Monday-Thursday, 5:00am- 3:30pm shifts (10 hours per day). Overtime may be required on Fridays and Saturdays. Job Location: Spartronics- 30167 Power Line Road; Brooksville, FL 34602 As a Machine Operator you will operate, set-up, program and maintain assembly machines and equipment used to produce various production assemblies. Provide technical leadership and mentoring to junior staff. Will identify and resolve equipment/process related defects. Examples of this equipment are (but not limited to) the following: SMT, Wave & Selective Solder machines, Auto Insertion, component prep, wire cutting machines and other automated or semi-automated equipment. What a Day Looks Like: Ensure that all assignments are performed in compliance with all applicable Federal, State, Provincial and Company safety and health regulations, and where applicable, proper personal protective equipment is utilized. Employees assigned to job tasks which require them to handle hazardous waste (Wave/ERSA Maintenance/Cleaning, Cathode Room Operator, Chemical Handler, Spray Room, and Facilities Supervisor), will be required to complete Hazardous Waste Management Training, Respirator Safety Training, Respirator Fit Test, and Lead and/or Respirator Surveillance annually. Set up oven with appropriate programs as indicated by documentation. Perform part verification using bar code scanner and computer program. Review findings on solder inspection station before passing or failing printed circuit boards. Inspect deposited solder paste and populated PWB's to applicable workmanship standards. Maintain all tooling (Stencils, pallets etc) updating records and replacing old or worn-out tooling. Performs or assists with full machine set-ups including transferring programs to specific machines. Responsible for reading, interpreting and performing set up and/or prep instructions. Initiate and maintain accurate paperwork and records as required by job. Meet hourly production goals and facilitate speedy resolution of machine problems as they arise. Responsible for daily clean up of all assigned work areas. Monitor machine line balance to achieve run rates and report to line supervision. Responsible for monitoring, minimizing and reporting machine scrap. Perform daily and weekly preventative maintenance. Troubleshoot functional problems with equipment and make adjustments as required. Completes other duties as requested. Requirements: We are an ITAR Controlled facility, all applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Minimum of one year of SMT or relevant experience is strongly preferred Education- Must be a High school graduate or have your GED Computer literate. Must be quality conscious and possess ability to meet production and quality standards. Ability to add and subtract whole numbers, fractions and decimals using direct reading, gauges, rulers and scales. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and written work instructions. Must be willing to schedule, attend, and pass continuing training courses. May be required to pass solder training class to operate certain pieces of equipment... May be required to do heavy lifting (not to exceed 30 lbs.) on some operations. Must maintain ESD Precautions Standards certification. Our Commitment: At Spartronics, we're dedicated to fostering an inclusive, diverse, and equitable workplace. We believe that diverse perspectives drive innovation, and we welcome candidates of all backgrounds to apply. Our culture at Spartronics values accountability, unity, respect, and transparency. These winning values are the lifeblood of our business. We embrace diversity through people who believe in these values. Embracing our employees' differences enables us to be a stronger team. Join Our Journey: If you're ready to be a part of something extraordinary, challenge the status quo, and shape the future, then we want to hear from you. Together, we'll continue to win, while we build products lives depend on. Our Benefits: Full range of medical, dental, and vision benefits. Flexible Savings Accounts for Medical, Dependent Care, and Limited Purpose (dental and vision only) PTO and Holiday Pay Company-paid life insurance and disability at 1 times your annual salary at no cost to you, with options to increase coverage amounts 401k with a company match of 50% to every dollar up to 6% Accident, Critical Illness, Hospital Indemnity, and Legal Insurance optional plans Employee Assistance Program Tuition Reimbursement Opportunities to grow and excel in the Electronics Manufacturing industry at a company that values promotions and learning from within. Every day is different, challenging, and rewarding. How to Apply: If this sounds like the perfect opportunity for you, please apply with your resume outlining your qualifications and why you're excited about joining Spartronics. Spartronics is an equal opportunity Employer/Veteran/Disabled 41 CFR 60-1.4. We comply with federal Affirmative Action guidelines in all employment opportunities for qualified employees and applicants. We encourage applications from candidates of all backgrounds and experiences. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description Machine Operator - Entry Level in DeLand, FL Kelly Services is currently seeking a Machine Operator - Entry Level for one of our top manufacturing clients in DeLand, FL. As a Machine Operator - Entry Level placed with Kelly Services, you will perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule. Our client's fast-paced, team-oriented environment is the perfect place to take your assembly career to the next level. Additional Responsibilities Include: • Perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule • Adhere to plant policies/procedures, department safety rules, Good Manufacturing Practices ISO 13485 regulations and Good Housekeeping procedures. • Complete all pertinent paperwork pertaining to the finished product being produced according to established guidelines in the manufacturing procedures. • Prepare and maintain required maintenance equipment records • Use of micrometers, dial calipers, and other precision measuring instruments to perform dimensional and physical inspections • Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards • Uses ANSI/ASQ Z1.4 sampling standard, part drawings, and specifications to determine inspection and testing required as well as acceptable quality levels • Selects products for inspection evaluation at specified stages in production process, performs various visual, dimensional, performance, mechanical, electrical, or chemical inspections per required characteristics • Report any unusual circumstances to supervisor and perform other miscellaneous duties as assigned • Responsible for the observation of department regulations and to use personal protective equipment (PPE) as required; must be safety conscious and Lockout / Tag out trained. Why Kelly? At Kelly Services , we work with the best. Our clients include 99 of the Fortune 100™ companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. As a Kelly Services candidate you will have access to numerous perks, including: • Kelly-sponsored Affordable Care Act health care coverage available for eligible employees • Group medical, prescription, vision, dental, life, and short-term disability insurance options that are available for purchase-and the coverage is portable* • Service bonus plan • Holiday pay plan • Weekly electronic pay options • Free online training campus available • Exclusive online employee community • Employee assistance program (EAP) available at no cost • Corporate discounts • Transportation spending accounts Apply Today! *Offered and administered by Leslie & Associates. These plans are not sponsored by Kelly Services. Qualifications Job Requirements: • High School Diploma or GED equivalent • Must be highly Mechanical - mechanics, machine repair, machine set up and/or machine maintenance • At least 6 months of experience in machine operator, assembly, inspection or manufacturing Additional Information This position is recruited for by a remote Kelly office, not your local Kelly branch. To be considered for this position, you must submit your resume to jovc833 @kellyservices.com or feel free to call Jeff Dosal at 601-866-6703. Due to the high volume of responses anticipated, only qualified candidates will be contacted.

Job DescriptionBenefits: 401(k) matching Bonus based on performance Company parties Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Wellness resources About us: Since 1981 Southeast Culvert has been serving Georgia with quality storm drainage products and exceptional customer service. Southeast Culvert is a leading manufacturer and distributor of storm drainage and water quality products and is looking to expand our sales team in Georgia and in the Southeast. We offer a wide variety of products for the storm drainage market including Corrugated Metal Pipe, High Density Corrugated Plastic Pipe, Water Quality Solutions, Underground Detention, Concrete Headwalls, and other complimentary products. We are a family business and value our traditions and team approach to doing business. For more than 40 years we have valued our relationships that have been built with our customers. Providing quality products at a fair price with customer service that is second to none, is the standard that we live by. We are looking for hard working customer service-oriented individuals that are self-motivated, honest, well organized, and with excellent communication skills to help continue our growth throughout the Southeast. If you are looking for a rewarding long-term career opportunity, be part of a growing team and sell products that are proven and accepted widely in our industry then we may be the right fit for you. Job Title: Machine Operator Role and Responsibilities: This position requires flexibility to work 40+ hours per week and some weekends in shift rotations covering a 24/7 operation (day / night shifts). There will be a training and application period to learn all facets of the process, end to end. The Operator reports directly to the Production Supervisor. The responsibilities of this position include, but are not limited to: Corrugated plastic pipe or extrusion machinery/mechanical expertise Manage the downstream process, personnel, and equipment Proactively manage engagement with maintenance team for planned and reactive maintenance of production equipment The ability to run and change over all diameter of pipe with minimal downtime, including root cause diagnostics Perform and analyze quality control monitoring and accurate reporting of production Perform tooling changeovers in an efficient manner Meet or exceed standard production efficiencies on all production lines Maintain facility housekeeping Practice proper PPE compliance and maintain a safe working record and environment Document all procedures, processes, and operations for replication and future use Execute quality control and testing Manage product input flows and inventory levels Train and organize downstream staff Meet or exceed facility housekeeping expectations Understand, practice, and align decisions with SeC core values Competencies: An applicant should possess and be able to provide examples of the following skills/knowledge depending on experience level: Multi-stage manufacturing and production process experience using extruder technologies Strong, demonstrated mechanical problem-solving skills Ability to direct & cross-train downstream personnel Ability to learn to read and use shop drawings An enjoyment of working with machinery and tools. Enjoyment of helping others and building trusting relationships Troubleshoot & document process and mechanical problems and perform repairs and adjustments to meet production needs Takes quick action to help customer needs and teammates Familiarity with and ability to use bill of material products

What does manufacturing contribute to Cardinal Health? Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications. Job Summary The purpose of this position is to operate, supply, sample and record movement of materials associated with production machinery and ancillary equipment in conformance to FDA, GMP's, ISO13485 standards, and finished product specifications; sample and inspect production, stage material accordingly and report production accuracy; monitor manufacturing process quality to assure that only acceptable materials are released to subsequent production processes. This is accomplished through statistical sampling and inspection which allows detection of changes in product quality so that corrective action is initiated. Clean and maintain work areas within the facility as assigned following standard operating procedures. Responsibilities Analyze product utilizing established test methods and gages and initiate corrective action with supervisor, department technical resources, and quality assurance inspectors. Perform requisite sampling and inspection of product in accordance with established department and plant procedures. Responsible for quality and quantity of production from assigned machines. Monitor machinery and processes during shift and request department technical assistance; make adjustments as necessary to ensure optimum performance of process. Report and track all production data into the appropriate information systems. Must be proficient with all measuring equipment i.e. micrometers, gages, etc. Demonstrate an understanding of the lean system and the ability to control the correct location of associated Kanban tickets. Assist/perform changeovers as required. Qualifications High School Diploma or GED preferred 1-3 years related work experience and/or training preferred What is expected of you and others at this level Applies acquired knowledge and skills to complete standard tasks Readily learns and applies new information and methods to work in assigned area Maintains appropriate licenses, training and certifications Works on routine assignments that require some problem resolution Works within clearly defined standard operating procedures and/or scientific methods Adheres to all quality guidelines Works under moderate degree of supervision Work typically involves regular review of output by work lead or supervisor Refers complex unusual problems to supervisor Pay rate: $17.00 per hour Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Medical, dental and vision coverage Paid time off plan Health savings account (HSA) 401k savings plan Access to wages before pay day with my FlexPay Flexible spending accounts (FSAs) Short- and long-term disability coverage Work-Life resources Paid parental leave Healthy lifestyle programs Application window anticipated to close: 12/3/2025 *if interested in opportunity, please submit application as soon as possible Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law. To read and review this privacy notice click here

Full-time Description At Spartronics - We build products lives depend on! We offer our employees a Full benefits package that includes Medical, Dental, Vision, PTO, 8 Paid Holidays, 401k (with company match), Long and short term disability, Life Insurance. Spartronics has been and will continue to be a leading manufacturer of electronics for Aero-space & Defense here in Brooksville for over 40 years! Our company & facility provide great benefits combined with over 150,000 square feet of state of climate controlled work space. Why Join Us: When you become a part of Spartronics, you're joining a team of dedicated and talented, individuals who share a common goal - to win as one. We value talent, innovation, and a hunger for growth. Here, you'll have the opportunity to work with industry leaders in Aerospace & Defense, Medical & Life Science, and Industrial markets where our customers put full trust in us to deliver the most complex, highly regulated products that have to work the first time, every time. Working Hours: Monday-Thursday, 5:00am- 3:30pm shifts (10 hours per day). Overtime may be required on Fridays and Saturdays. Job Location: Spartronics- 30167 Power Line Road; Brooksville, FL 34602 As a Machine Operator you will operate, set-up, program and maintain assembly machines and equipment used to produce various production assemblies. Provide technical leadership and mentoring to junior staff. Will identify and resolve equipment/process related defects. Examples of this equipment are (but not limited to) the following: SMT, Wave & Selective Solder machines, Auto Insertion, component prep, wire cutting machines and other automated or semi-automated equipment. What a Day Looks Like: Ensure that all assignments are performed in compliance with all applicable Federal, State, Provincial and Company safety and health regulations, and where applicable, proper personal protective equipment is utilized. Employees assigned to job tasks which require them to handle hazardous waste (Wave/ERSA Maintenance/Cleaning, Cathode Room Operator, Chemical Handler, Spray Room, and Facilities Supervisor), will be required to complete Hazardous Waste Management Training, Respirator Safety Training, Respirator Fit Test, and Lead and/or Respirator Surveillance annually. Set up oven with appropriate programs as indicated by documentation. Perform part verification using bar code scanner and computer program. Review findings on solder inspection station before passing or failing printed circuit boards. Inspect deposited solder paste and populated PWB's to applicable workmanship standards. Maintain all tooling (Stencils, pallets etc) updating records and replacing old or worn-out tooling. Performs or assists with full machine set-ups including transferring programs to specific machines. Responsible for reading, interpreting and performing set up and/or prep instructions. Initiate and maintain accurate paperwork and records as required by job. Meet hourly production goals and facilitate speedy resolution of machine problems as they arise. Responsible for daily clean up of all assigned work areas. Monitor machine line balance to achieve run rates and report to line supervision. Responsible for monitoring, minimizing and reporting machine scrap. Perform daily and weekly preventative maintenance. Troubleshoot functional problems with equipment and make adjustments as required. Completes other duties as requested. Requirements We are an ITAR Controlled facility, all applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Minimum of one year of SMT or relevant experience is strongly preferred Education- Must be a High school graduate or have your GED Computer literate. Must be quality conscious and possess ability to meet production and quality standards. Ability to add and subtract whole numbers, fractions and decimals using direct reading, gauges, rulers and scales. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and written work instructions. Must be willing to schedule, attend, and pass continuing training courses. May be required to pass solder training class to operate certain pieces of equipment... May be required to do heavy lifting (not to exceed 30 lbs.) on some operations. Must maintain ESD Precautions Standards certification. Our Commitment: At Spartronics, we're dedicated to fostering an inclusive, diverse, and equitable workplace. We believe that diverse perspectives drive innovation, and we welcome candidates of all backgrounds to apply. Our culture at Spartronics values accountability, unity, respect, and transparency. These winning values are the lifeblood of our business. We embrace diversity through people who believe in these values. Embracing our employees' differences enables us to be a stronger team. Join Our Journey: If you're ready to be a part of something extraordinary, challenge the status quo, and shape the future, then we want to hear from you. Together, we'll continue to win, while we build products lives depend on. Our Benefits: Full range of medical, dental, and vision benefits. Flexible Savings Accounts for Medical, Dependent Care, and Limited Purpose (dental and vision only) PTO and Holiday Pay Company-paid life insurance and disability at 1 times your annual salary at no cost to you, with options to increase coverage amounts 401k with a company match of 50% to every dollar up to 6% Accident, Critical Illness, Hospital Indemnity, and Legal Insurance optional plans Employee Assistance Program Tuition Reimbursement Opportunities to grow and excel in the Electronics Manufacturing industry at a company that values promotions and learning from within. Every day is different, challenging, and rewarding. How to Apply: If this sounds like the perfect opportunity for you, please apply with your resume outlining your qualifications and why you're excited about joining Spartronics. Spartronics is an equal opportunity Employer/Veteran/Disabled 41 CFR 60-1.4. We comply with federal Affirmative Action guidelines in all employment opportunities for qualified employees and applicants. We encourage applications from candidates of all backgrounds and experiences. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description Machine Operator - Entry Level in DeLand, FL Kelly Services is currently seeking a Machine Operator - Entry Level for one of our top manufacturing clients in DeLand, FL. As a Machine Operator - Entry Level placed with Kelly Services, you will perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule. Our client's fast-paced, team-oriented environment is the perfect place to take your assembly career to the next level. Additional Responsibilities Include: • Perform scheduled preventive maintenance as assigned by supervisor according to the Preventive Maintenance schedule • Adhere to plant policies/procedures, department safety rules, Good Manufacturing Practices ISO 13485 regulations and Good Housekeeping procedures. • Complete all pertinent paperwork pertaining to the finished product being produced according to established guidelines in the manufacturing procedures. • Prepare and maintain required maintenance equipment records • Use of micrometers, dial calipers, and other precision measuring instruments to perform dimensional and physical inspections • Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards • Uses ANSI/ASQ Z1.4 sampling standard, part drawings, and specifications to determine inspection and testing required as well as acceptable quality levels • Selects products for inspection evaluation at specified stages in production process, performs various visual, dimensional, performance, mechanical, electrical, or chemical inspections per required characteristics • Report any unusual circumstances to supervisor and perform other miscellaneous duties as assigned • Responsible for the observation of department regulations and to use personal protective equipment (PPE) as required; must be safety conscious and Lockout / Tag out trained. Why Kelly? At Kelly Services , we work with the best. Our clients include 99 of the Fortune 100™ companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. As a Kelly Services candidate you will have access to numerous perks, including: • Kelly-sponsored Affordable Care Act health care coverage available for eligible employees • Group medical, prescription, vision, dental, life, and short-term disability insurance options that are available for purchase-and the coverage is portable* • Service bonus plan • Holiday pay plan • Weekly electronic pay options • Free online training campus available • Exclusive online employee community • Employee assistance program (EAP) available at no cost • Corporate discounts • Transportation spending accounts Apply Today! *Offered and administered by Leslie & Associates. These plans are not sponsored by Kelly Services. Qualifications Job Requirements: • High School Diploma or GED equivalent • Must be highly Mechanical - mechanics, machine repair, machine set up and/or machine maintenance • At least 6 months of experience in machine operator, assembly, inspection or manufacturing Additional Information This position is recruited for by a remote Kelly office, not your local Kelly branch. To be considered for this position, you must submit your resume to jovc833 @kellyservices.com or feel free to call Jeff Dosal at 601-866-6703. Due to the high volume of responses anticipated, only qualified candidates will be contacted.

Job Description About us: Since 1981 Southeast Culvert has been serving Georgia with quality storm drainage products and exceptional customer service. Southeast Culvert is a leading manufacturer and distributor of storm drainage and water quality products and is looking to expand our sales team in Georgia and in the Southeast. We offer a wide variety of products for the storm drainage market including Corrugated Metal Pipe, High Density Corrugated Plastic Pipe, Water Quality Solutions, Underground Detention, Concrete Headwalls, and other complimentary products. We are a family business and value our traditions and team approach to doing business. For more than 40 years we have valued our relationships that have been built with our customers. Providing quality products at a fair price with customer service that is second to none, is the standard that we live by. We are looking for hard working customer service-oriented individuals that are self-motivated, honest, well organized, and with excellent communication skills to help continue our growth throughout the Southeast. If you are looking for a rewarding long-term career opportunity, be part of a growing team and sell products that are proven and accepted widely in our industry then we may be the right fit for you. Job Title: Machine Operator Role and Responsibilities: This position requires flexibility to work 40+ hours per week and some weekends in shift rotations covering a 24/7 operation (day / night shifts). There will be a training and application period to learn all facets of the process, end to end. The Operator reports directly to the Production Supervisor. The responsibilities of this position include, but are not limited to: Corrugated plastic pipe or extrusion machinery/mechanical expertise Manage the downstream process, personnel, and equipment Proactively manage engagement with maintenance team for planned and reactive maintenance of production equipment The ability to run and change over all diameter of pipe with minimal downtime, including root cause diagnostics Perform and analyze quality control monitoring and accurate reporting of production Perform tooling changeovers in an efficient manner Meet or exceed standard production efficiencies on all production lines Maintain facility housekeeping Practice proper PPE compliance and maintain a safe working record and environment Document all procedures, processes, and operations for replication and future use Execute quality control and testing Manage product input flows and inventory levels Train and organize downstream staff Meet or exceed facility housekeeping expectations Understand, practice, and align decisions with SeC core values Competencies: An applicant should possess and be able to provide examples of the following skills/knowledge depending on experience level: Multi-stage manufacturing and production process experience using extruder technologies Strong, demonstrated mechanical problem-solving skills Ability to direct & cross-train downstream personnel Ability to learn to read and use shop drawings An enjoyment of working with machinery and tools. Enjoyment of helping others and building trusting relationships Troubleshoot & document process and mechanical problems and perform repairs and adjustments to meet production needs Takes quick action to help customer needs and teammates Familiarity with and ability to use bill of material products