Production operator jobs in Conroe, TX

Port-Production Operator Trainee Huntsman is seeking a Port-Production Operator Trainee supporting the Polyurethanes Division located at our Houston Port TEROL site in Houston, Texas. This position will report to the Production Manager, Brian Shepard. Job Scope The Port-Production Operator Trainee will train under a qualified operator to learn and perform all operational tasks required for progression to Operator C within the Houston Port TEROL operation. This role supports safe, efficient, and compliant production activities through adherence to all Operational and EH&S policies, procedures, and practices. In summary, as the Port-Production Operator Trainee, you will: Perform essential Operator C duties in outside operations, including operating, starting up, and shutting down process equipment to produce quality, on-spec products. Maintain a current understanding of unit equipment, operating principles, and process impacts. Conduct routine unit rounds, adjust equipment as needed, and collect product samples for laboratory analysis. Review lab results and adjust operating conditions based on findings. Complete reports, operating logs, work orders, and safe work permits following prescribed procedures. Uphold good housekeeping standards to ensure a clean, safe, and orderly work environment. Monitor the safe handling, identification, storage, and removal of waste streams. Complete all assigned training and participate in site safety and environmental programs. Maintain regular workplace presence and work extra hours or overtime when required to support production needs. Collaborate effectively with team members and support broader Huntsman goals and initiatives. Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. The candidate must have an unrestricted right to work for Huntsman in the United States. Minimum Qualifications Education Required: Associate degree (2+year) in Process Technology, or High school diploma plus 6-12 months of experience in a petrochemical plant. Experience Required: 0-12 months of related experience. Certifications/Licenses: None required. Skills and Knowledge Candidates must demonstrate: Strong commitment to safety, environmental compliance, and operational discipline. Ability to learn and apply technical processes and operating procedures. Teamwork, communication, and the ability to work collaboratively with diverse colleagues. Attention to detail in monitoring equipment, collecting data, and maintaining accurate documentation. Dependability, including consistent attendance and willingness to work overtime when needed. Preferred Qualifications Prior experience in a petrochemical or manufacturing environment. Familiarity with process operations, equipment monitoring, or industrial safety programs. Working Environment Work is performed in an industrial chemical production environment. Requires ability to work outdoors in varying weather conditions. Requires standing, walking, climbing stairs/ladders, and wearing all required PPE. Must be able to work overtime or extra hours to support production demands. Huntsman is proud to promote equal opportunity in the workplace All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, national origin, disability, age, or any other protected characteristic. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service and will not be compensated. Huntsman is aware of scams involving fraudulent job offers. We do not make job offers until after a candidate has submitted a job application and has participated in an interview. Please be advised that any job offer that requires payment or requires you to deposit a check is likely a scam. If you have questions about any open positions at Huntsman or Rubison, please visit our Careers website at ******************************************** Additional Locations:

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorThis position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Since 1961, Precoat Metals (**************** has been setting the standards in the coil coatings industry worldwide. We are committed to this level of quality in both our product line and customer service, and focus our resources on investigating and implementing new coil coating technologies, developing unique coatings, ink and film systems, and designing multifaceted prints while reducing the cycle time to market. We are able to achieve this "culture of excellence" thru the hard work and talent of the people on our team. Job Description The Operations Support role is a vital part to the overall operations to the plant. And the experience you have may make you a perfect fit to join our team at our Houston, TX plant. You will be called upon to assist with, and may be assigned work in, any area of the plant, including coating lines, slitting, shipping, receiving, paint vault, and packaging. Want to take your career to the next level? Working at Precoat Metals can take you down a career path of multiple opportunities, including opportunity to move into more skilled Line Operator positions. Start your success down a great career path today with Precoat Metals! Some of your Responsibilities include: Retrieves and transports bare coils and maintains flow of metal to lines by safely operating cranes, fork lifts, and upenders without damaging material or equipment. Trims, packages and bands finished coils according to customer specifications using proper skids, bands, pads, and wrapping materials. Inspects coils and identifies and reports defects. Reads and interprets production schedules. Accurately identifies proper skid and package specified on schedules. Reads and accurately records coil weights, order numbers, etc. Loads or unloads received or shipped coils onto or off of trucks. Qualifications As the selected candidate, you will need a high school level reading and writing, visual acuity to read labels, meters, gauges, documents and instructions, in addition to the following: Ability to read and comprehend written materials such as schedules, SOPs, work rules, etc. Ability to effectively communicate with all members of team. Ability to safely operate small manual and electric hand tools. Available to work up to 12 hours per day on rotating shifts, that could include weekends and holidays. Additional Information We are an equal opportunity employer. Precoat Metals is a Drug Free Workplace. We are an Equal Opportunity Employer. Precoat Metals is a Drug Free Workplace

WHO ARE WE Global Healing Center is a leading manufacturer, distributor, and retailer of healthy living products, nutraceuticals, and dietary supplements specializing in cleansing and detoxification. Our mission: provide access to natural health information and products that revolutionize one's journey to better health. JOB DESCRIPTION The Production Line Operator plays a crucial role in overseeing the setup, operation, and upkeep of production line equipment. This role demands a keen eye for detail and a commitment to upholding product quality standards while ensuring the efficiency and seamless operation of the production process. Key responsibilities include supplying raw materials to machinery, conducting product inspections, maintaining equipment, and adhering to established safety protocols. The Production Line Operator will possess technical proficiency, meticulous attention to detail, and the ability to excel under pressure within a fast-paced setting. Additionally, the Production Line Operator should exhibit strong teamwork skills and the capacity to execute basic troubleshooting and machinery repairs. Requirements Operate Equipment: Run machines and ensure they are operating efficiently, monitoring their performance throughout the production cycle. Feed Raw Materials: Load raw materials into machines to begin production and ensure an uninterrupted workflow. Test Products: Check finished products to ensure they meet established quality standards and specifications. Maintain Equipment: Perform minor repairs, replace parts, and troubleshoot malfunctions to keep the production line running smoothly. Follow Safety Procedures: Adhere to safety protocols, ensuring a safe working environment, and report any safety hazards or concerns. Record Data: Keep accurate records of production data, including quantities produced, machine performance, and any incidents or deviations from normal operations. Clean Work Areas: Maintain cleanliness in the production area, keeping it free from hazards and ensuring compliance with safety regulations. Package Products: Package finished products for storage or shipment, ensuring products are properly secured for distribution. Attach Labels: Apply appropriate labels, including product information and company logos, to finished products before shipment. Skills: 2+ years of experience in a Production Operator position or job title with similar responsibilities High School diploma or GED equivalence Must be able to lift and carry up to 50lbs Must be able to stand for long period of time Strong attention to detail Ability to collaborate and work well with others in a team environment Dexterity and manual skills to handle equipment and materials Ability to observe and record production data accurately Effective verbal communication skills for reporting issues and collaborating with the team Strong problem-solving skills to identify and resolve equipment malfunctions and production issue Bonus: Cgmp course and certification Arizona Food Handlers Card Lean Six Sigma Yellow Belt * Other courses, classes and certifications might be suggested from direct managers * Benefits Paid Time Off (PTO); Company covered health, dental, vision, and life insurance; 5% 401(k) match plus an additional 4%; Wellness Bonus Employee store credit; Company sponsored events; Fun team-building activities.

Ingenia Polymers is a world-class, fast-growing, global company looking for people that have the passion to lead, the desire to grow, and the ability to create and deliver solutions for our customers. We offer an environment that is innovative, diverse, intellectually stimulating, and unique. Ingenia Polymers is seeking highly capable and motivated people to contribute to our ongoing success and grow with us as we continue our international expansion. We are searching for experienced Production Operators at our Houston and La Porte locations. Job Overview: This position is focused on operating an extrusion line from start to finish. Extrusion experience preferred but not required. Training provided. High operational/mechanical aptitude with the desire and flexibility to handle multiple responsibilities along the line. Able to recognize and implement process improvement opportunities as needed. Responsibilities and Duties: • Set up, operate, and monitor plastics extrusion line • Prepare extrusion parts and tools for production • Identify and troubleshoot extrusion line issues • Measure and perform quality control checks of finished products • Adhere to all safety protocol • Track operational data daily • Deliver/transport materials for extrusion operation • Achieve daily production goals • Other job duties as assigned Qualifications: • Previous extrusion experience preferred but not required (training provided) • Warehousing, forklift and mechanical aptitude • Flexibility and ability to adapt well to change • Highly dependable and punctual • High school/GED diploma minimum • Valid driver's license • Ability to work well with others in a team environment • Ability to make quick decisions • Rotating Shift work Physical Job Requirements: • Ability to perform production/warehouse functions such as heavy lifting, working from a ladder, organizing/rotating inventory, and other similar assigned tasks • Standing and operating extrusion line for extended periods of time • Must be able to lift a minimum of 50 lbs. without assistance • Must be able to operate a forklift; training provided • Must pass drug screen and background check • Must wear safety shoes with steel toe and metatarsal guard, safety glasses (with side shields if applicable) and safety ear protection • Must be able to stand for extended periods of time and may require medium to heavy strength lifting, pushing and pulling weight requirements, bending, stooping, twisting, reaching, etc. • Must understand and comply with Hazard Communication and Hazardous Waste management guidelines

Job Details Experienced HOPPER - TOMBALL, TX Full Time Not Specified None Any ManufacturingDescription Job Title: Robot Operator Reports to: Robot Operator Supervisor Job Type: Hourly, Non-Exempt SUMMARY: Loads and unloads parts in jigs for production robots. REQUIRED COMPETENCIES Loads and unloads parts in jigs for production robots. Helps setup jigs for job changes. Uses start boxes to generate program start/stop Visually inspects parts per sample and per Supervisor. Follows Supervisor directions. Performs general daily maintenance on equipment. Operates forklifts. Upkeep and cleanliness of work areas. Follow company safety & security guidelines Attendance and punctuality are essential functions of this job. Other duties as needed. QUALIFICATIONS To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required DESIRED EDUCATION and/or EXPERIENCE Previous experience On the job training to be provided, as needed, for all assigned responsibilities. PHYSICAL DEMANDS Employee may be required to do the following: climbing into and out of equipment; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands, fingers and feet to operate tools and equipment; lifting up to 40 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction. The employee is frequently required to sit while performing the duties of this job (approx. 20%) walk (70%) stand (10%) sit. The employee is expected to lift or move materials (40% of workday) MENTAL DEMANDS Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; reading and interpreting information; judging distances and accurately; following oral and/or written directions; reading; writing; ability to recognize and report safety hazards WORK ENVIROMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is moderately loud. The individual who occupies this position must not pose a direct threat to the health or safety of such individual or others in the workplace. This means the individual must not pose a significant risk of substantial harm to the health or safety of the individual or others that cannot be eliminated or reduced by reasonable accommodation. The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Duties may be assigned and/or reassigned as needed and/or instructed by department manager, general manager or other supervisor. M / F / Disability /Veteran / EOE **********DRUG FREE WORKPLACE******* “FabCorp/Hammonds is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, sexual orientation and gender identity, status as a protected veteran, or disability.”

Temp BRANCH: 49 - NW HOUSTON TMD Staffing is looking to hire Machine Operators in the NW Houston (77040) area! WORK ENVIRONMENT: Shop WORK SCHEDULE: 2nd shift: Monday-Friday 2:30pm to 11:00pm , and Saturday as needed PAY RATE: $17.00 per hour RESPONSIBILITIES: Machine Operator is responsible for running machines to bend, cut, and band rebar materials. Must be comfortable moving rebar that is 2 ft to 64 feet in length. REQUIREMENTS: Previous working experience in industrial manufacturing and/or production Machine operator, overhead crane, tower cranes experience is a plus Experience with sheet metals, rebar, and steel is a plus Work outside in various environmental conditions such as extreme heat, noise, and dust. Ability to lift up to 50 lbs WHO IS TMD STAFFING? TMD Staffing is a trusted provider of staffing and recruiting services in Texas and Maryland for over 30 years. Our team works closely with job seekers to help them identify and land the right jobs for them. With TMD Staffing, you can get your foot in the door at top employers and choose from temporary, temporary-to-hire, and direct-hire jobs. Whether your goal is immediate income or a long-term career strategy, our experts are here to assist. To learn more about our positions, please give TMD Staffing NW Houston a call at ************. Apply online (******************** or email your resume to ******************* for immediate consideration. #TMDHMG 16.00

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

HMT is looking for a Machine Operator for the Tomball, TX location. The Machine Operator will be responsible for metal fabrication using manufacturing processes such as shearing, stamping, punching, bending, slitting, grinding, manual operations, etc. Tasks include operation and control of power &brake presses and auxiliary equipment in compliance with HMT requirements. Job performance must aid attaining TDC key performance indicators for safety, quality, delivery and cost. Role Responsibilities: Produce parts made from plastics, stainless and carbon steel, aluminum and other materials by operating power & break presses for punching, cutting, forming, bending, slitting, etc. ensuring compliance with requirements. Setup and operate machinery according to work order, safety and performance procedures and expectations. Install workpiece stoppers, guides and any other auxiliary equipment required; control material flow IN/OUT. Carry out production ensuring that established features to the form, fit and function of the product are achieved during stamping process. Perform setup/ change-over applying the single minute exchange die (SMED) procedure. Monitor work piece quality on each operation by submitting 1st piece and the subsequent 100th pieces for inspection in compliance with TDC inspection-testing procedures. Operate machinery to the full capacity and report any issue that can result in machine sub-utilization. Maintain WIP & finished product identified regarding inspection status & traceability by placing TAGs/labels on pallets and crates indicating purchase order, part number, work order, date, quantity, etc. Fill paperwork timely by adding production output data to the routers, stating time, dates, quantities, approvers etc.; make sure info is accurate, clear and complete. Identify and segregate any nonconforming product and notify supervisor for determining further actions. Carry out daily preventive maintenance and inspection to machinery, tooling and auxiliary equipment, including trucks following the customized check lists; report any item noticed out of compliance from OSHA and company regulations. Dispose scrap, broken pallets, lubricants and other chemicals timely, using allotted containers/dumpsters as indicated by HMT procedures. Sort, set in order and clean tools, shadow boards, machinery, floors, cabinets, transportation carts, etc. in compliance with 5S program and the weekly tasks schedule. Other tasks as required by HMT management. Qualifications Required: High school or vocational training, preferable. 1-3 years of experience in manufacturing environment preferably sheet metal fabrication. Demonstrated ability to read and interpret basic engineering drawing. Maintain daily production performance above 90%. Successfully completed forklift training. Ability to communicate read and understand in the English language. Background and Drug Testing PHYSICAL REQUIREMENTS: The physical demands must be met by an employee to successfully perform essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Ability to work in extreme temperatures' (cold or heat). While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to walk, stoop, kneel, climb, carry, pushing/pulling and use repetitive wrist and hand movements. The employee may be required to lift and/or move objects of up to 50 pounds. Hearing and seeing ability of rapid mental coordination. It is required to be mentally alert for the entirety of shift. About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Axiom Space is guided by the vision to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy for the benefit of every human everywhere. Axiom Space is the leading provider of human spaceflight services and developer of human-rated space Axiom Extravehicular Mobility Unit. Axiom Space operates end-to-end missions to the International Space Station today while developing its successor, Axiom Station - a permanent commercial destination in low-Earth orbit that will sustain human growth off the planet and bring untold benefits back home. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Electronics Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. POSITION SUMMARY Our team is looking for an energetic and dynamic Electronics Technician who will primarily be responsible for the assembly and test of electrical hardware form the developmental stages through flight. This position interfaces with employees and government agencies. This position reports to the AxEVA Production Lead. This role is onsite and will be based at our Gemini facility located in Webster, TX. KEY DUTIES & RESPONSIBILITIES The electronics technician will assemble, test, and integrate prototype, qualification, and space-rated avionics hardware. Fabricate avionics wire harnesses, terminations, connectors, pin and socket assemblies, harness shields, ground terminations, and related components per drawings. The ability to read and understand electrical drawings and diagrams of avionics systems, assemblies, and wiring layouts. Ability to assemble prototype and test boxes with minimalistic drawings. Familiarity with standard lab test equipment (multimeters, oscilloscopes, data acquisition boxes, etc.). Must be able to interact with all engineering disciplines and technical management in a professional team-oriented environment. Communicating project progress, status, and potential issues to stakeholders and leadership. Implementing and maintaining agile project management methodologies throughout the project lifecycle. Perform additional job duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Associate degree required, or an equivalent combination of education and relevant experience; commercial or military aircraft experience strongly preferred. Minimum 4 years of hands-on experience as an electronics technician. Proven background in board-level, system-level, and spacecraft-level electronics hardware. Demonstrated expertise in fabricating, assembling, and testing avionics and electrical assemblies. Must hold one or more of the following certifications: NASA-STD-8739.4: Workmanship Standard for Crimping, Interconnecting Cables, Harnesses & Wiring IPC/WHMA-A-620: Requirements and Acceptance for Cable and Wire Harness Assemblies with Space and Military Applications (Electronic Hardware Addendum) IPC J-STD-001: Requirements for Soldered Electrical and Electronic Assemblies with Space and Military Applications NASA-STD-8739.2: Surface Mount Soldering NASA-STD-8739.3: Through-Hole Soldering NASA-STD-8739.1: Workmanship Standard for Polymeric Application on Electronic Assemblies Strong track record of delivering results in fast-paced, ambiguous environments. Proactive problem-solver with sound judgment and the ability to address complex challenges effectively. Excellent organizational skills with the ability to meet tight deadlines while ensuring high-quality results. Skills Passion for space and the mission Executes priorities with precision and pace Entrepreneurial, growth mindset High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies: Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT: Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

World Emblem is one of the world's leading suppliers in high quality decorations. We offer a variety of FlexStyle, custom embroidered, sublimated, high-visibility striping, transfers, and more. Our product quality is complemented by its high level of customer satisfaction. With an average of less than 5 days on most products, World Emblem has one of the most competitive turn-around times in the market. For team members both domestic and abroad, World Emblem creates an inspiring and stimulating work environment so that our team has the space and the resources to innovate within our industry. Job Summary We are seeking Machine Operators / Sewers to add to our growing team, preferably with some embroidery/manufacturing experience. If not, don't worry we provide training. Responsible for the operation of embroidery machines / sewing. Candidates Must Possess the Following Abilities: •Identify colors •Quickly thread needles •Must be able to accurately compare similarities and differences among sets of letters, numbers, objects, pictures or patterns •Use of hands, together with your arm, or your two hands to grasp, manipulate or assemble objects •Work on repeatedly adjusting the control of a machine to exact positions Job Requirements • Must have 1-2 years manufacturing/production experience and working in a fast pace environment Traits required for success •High standards, high quality work is of utmost importance •Communicate well with others; team player •Dependable, reliable and punctual •Attention to detail •Structured, organized and efficient •Ability to multitask •Must be able to handle pressure in a fast-paced environment World Emblem is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. World Emblem is proud to be a drug free workplace. All applicants will undergo a criminal background check, pre-placement drug screen, and are in compliance with E-Verify

Machine Shop Operator Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program. Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed. Review parts program file and select set tools in tool holder, turret, or cross slide location. Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required. Unload bar stock from delivery truck with overhead crane and place in intermediate storage area. Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications. Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear. Indicate work to detect and eliminate run out. Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism. Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor. Maintain workplace in neat and orderly condition. Qualifications/Requirements GED or High School Diploma 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

At Tenaris, you will join a global network of professionals working together toward a common goal: shape the future of energy through advanced tubular products and services. If you want to become part of a diverse team that values results, analytical approach to problem solving and teamwork, Tenaris is the place for you. Hydrostatic Test Operator / Baytown, TX LOCATION: Baytown - Texas - USA DEPARTMENT: INDUSTRIAL OPERATIONS Purpose Performs hydrostatic and drift test on seamless pipe in a safe and efficient manner following Work Instructions and Procedures while complying with Tenaris Quality standards. Main Activities * Must operate overhead crane * Executes change over and set up of the machine using overhead crane. * Performs Hydrotesting and Drifting machine operation. * Verifies coolant levels, test time, and pressure meets work order specifications. * Performs LOTO, preventitive maintenance (PM Day), and does daily operative maintenance (coolant level, machine adjustments, seals, etc.). * Updates information in the tracking systems and records the obtained results. * Performs housekeeping of own workstation and Finishing line if needed. If your experience and knowledge match our requirements, please apply Tenaris is an equal opportunity employer, valuing diversity in employment. We thank all candidates for their interest, however, only those that match the criteria required for the desired profile will be contacted. Visit our Careers Page Follow us on LinkedIn Follow us on Glassdoor Like us on Facebook Follow us on Instagram Location: Baytown, Texas, USA Date: Nov 28, 2025

Machine Operator 1 / QA Weights We are KIK! We create the products and brands that people trust to clean, sanitize, and protect their homes, pools, and cars. We are one of North America's largest independent consumer product manufacturers with 20 North American manufacturing facilities. We also operate globally in Europe, Asia, UK, Australia, New Zealand, and South Africa. We are known by our portfolio of over 40 brands including Spic and Span and Comet cleaning products, Clorox Pool&Spa (under license), BioGuard, and Natural Chemistry pool chemicals, and Prestone and Holts automotive performance chemicals. We are also the #1 producer in North America for store-brand ("private label") bleach and a leading private label provider of laundry detergent and additives, dishwashing products, general purpose cleaning and other home care products. Our global team of over 2,500 employees drive our capabilities in product development, product formulation, strategic sourcing, manufacturing, packaging design, brand marketing, project management, quality assurance, compliance, distribution, and logistics. Our organization is constantly evolving and is driven by a set of "One KIK" values - a dedication to following through on commitments in a customer-focused, profit-motivated way; while never compromising on safety, ethics, or integrity. Essential Job Functions * Operate various high speed liquid filling machinery including but not limited to fillers, labelers, cappers, palletizers, depalletizes case erectors, and heat induction sealers case erectors, etc. * Examine and act on production orders to determine quantities to be manufactured, job specifications and or special instructions. * Maintain time and production records. * Maintain quality standards. * Conduct basic troubleshooting on the assigned equipment and perform minor equipment adjustments and changeovers. * Follow Safety /GMP guidelines. * Comply with PPE, Good Manufacturing Practices, Standard Operating Procedures, Safety Standards, and follow all plant policies and procedures. The above statement describes the general nature and level off work only. They are not an exhaustive list of all required responsibilities, duties, and skills. Other duties may be added, or this description amended at any time. Qualifications * 1-2 years' experience as a Machine operator in the packaging industry. * Production knowledge of raw materials, production processes, quality control and other techniques for effective manufacturing preferred. * Must be able to verbally communicate, read and write in English. * Basic mathematics skills required. * Must be able to take direction and work unsupervised A Career with KIK Offers: KIK offers very competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. Thank you for your interest and consideration of a position with KIK Consumer Products. *************** KIK is an Equal Employment Opportunity / Affirmative Action employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law. Privacy Policy: https://***************/privacy-policy-applicant

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorThis position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Benefits *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Since 1961, Precoat Metals (**************** has been setting the standards in the coil coatings industry worldwide. We are committed to this level of quality in both our product line and customer service, and focus our resources on investigating and implementing new coil coating technologies, developing unique coatings, ink and film systems, and designing multifaceted prints while reducing the cycle time to market. We are able to achieve this "culture of excellence" thru the hard work and talent of the people on our team. Job Description The Operations Support role is a vital part to the overall operations to the plant. And the experience you have may make you a perfect fit to join our team at our Houston, TX plant. You will be called upon to assist with, and may be assigned work in, any area of the plant, including coating lines, slitting, shipping, receiving, paint vault, and packaging. Want to take your career to the next level? Working at Precoat Metals can take you down a career path of multiple opportunities, including opportunity to move into more skilled Line Operator positions. Start your success down a great career path today with Precoat Metals! Some of your Responsibilities include: Retrieves and transports bare coils and maintains flow of metal to lines by safely operating cranes, fork lifts, and upenders without damaging material or equipment. Trims, packages and bands finished coils according to customer specifications using proper skids, bands, pads, and wrapping materials. Inspects coils and identifies and reports defects. Reads and interprets production schedules. Accurately identifies proper skid and package specified on schedules. Reads and accurately records coil weights, order numbers, etc. Loads or unloads received or shipped coils onto or off of trucks. Qualifications As the selected candidate, you will need a high school level reading and writing, visual acuity to read labels, meters, gauges, documents and instructions, in addition to the following: Ability to read and comprehend written materials such as schedules, SOPs, work rules, etc. Ability to effectively communicate with all members of team. Ability to safely operate small manual and electric hand tools. Available to work up to 12 hours per day on rotating shifts, that could include weekends and holidays. Additional Information We are an equal opportunity employer. Precoat Metals is a Drug Free Workplace. We are an Equal Opportunity Employer. Precoat Metals is a Drug Free Workplace

Axiom Space is collaborating with Astrolab, Inc. to develop a Lunar Terrain Vehicle (LTV) for future Artemis missions, combining Axiom's advanced AxEMU spacesuit with Astrolab's FLEX rover to enable groundbreaking scientific exploration on the Moon's surface. This partnership reflects Axiom Space's broader mission to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy that will empower our civilization to transcend Earth for the benefit of every human, everywhere. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Electrical Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. Employment in this role is contingent on Astrolab/Axiom being selected as a winner of NASA's LTVS contract. POSITION SUMMARY We are looking for a resilient, high-energy, experienced Electrical Technician who will primarily be responsible for the assembly and test of electrical hardware form the developmental stages through flight for the Lunar Terrain Vehicle (LTV) Program. This position interfaces with employees and government agencies. This position reports to the AxEVA Production Lead. This role is onsite and will be based at our Gemini facility located in Webster, TX. KEY DUTIES & RESPONSIBILITIES Assemble, test, and integrate prototype, qualification, and space-rated avionics hardware. Fabricate avionics wire harnesses, terminations, connectors, pin and socket assemblies, harness shields, ground terminations, and related components per drawings. Communicate project progress, status, and potential issues to stakeholders and leadership. Implement and maintain agile project management methodologies throughout the project lifecycle. Perform additional job duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Associate degree required, or an equivalent combination of education and relevant experience; commercial or military aircraft experience strongly preferred. Minimum 5 years of hands-on experience as an electronics technician. Proven background in board-level, system-level, and spacecraft-level electronics hardware. Demonstrated expertise in fabricating, assembling, and testing avionics and electrical assemblies. Must hold one or more of the following certifications: IPC/WHMA-A-620: Requirements and Acceptance for Cable and Wire Harness Assemblies with Space and Military Applications (Electronic Hardware Addendum) IPC J-STD-001: Requirements for Soldered Electrical and Electronic Assemblies with Space and Military Applications NASA-STD-8739.1: Workmanship Standard for Polymeric Application on Electronic Assemblies Strong track record of delivering results in fast-paced, ambiguous environments. Proactive problem-solver with sound judgment and the ability to address complex challenges effectively. Excellent organizational skills with the ability to meet tight deadlines while ensuring high-quality results. Skills The ability to read and understand electrical drawings and diagrams of avionics systems, assemblies, and wiring layouts Familiarity with standard lab test equipment (multimeters, oscilloscopes, data acquisition boxes, etc.). Must be able to interact with all engineering disciplines and technical management in a professional team-oriented environment Executes priorities with precision and pace High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies: Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT: Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

Machine Shop Operator Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program. Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed. Review parts program file and select set tools in tool holder, turret, or cross slide location. Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required. Unload bar stock from delivery truck with overhead crane and place in intermediate storage area. Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications. Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear. Indicate work to detect and eliminate run out. Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism. Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor. Maintain workplace in neat and orderly condition. Qualifications/Requirements GED or High School Diploma 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Machine Operator 1 / QA Weights We are KIK! We create the products and brands that people trust to clean, sanitize, and protect their homes, pools, and cars. We are one of North America's largest independent consumer product manufacturers with 20 North American manufacturing facilities. We also operate globally in Europe, Asia, UK, Australia, New Zealand, and South Africa. We are known by our portfolio of over 40 brands including Spic and Span and Comet cleaning products, Clorox Pool&Spa™ (under license), BioGuard , and Natural Chemistry pool chemicals, and Prestone and Holts automotive performance chemicals. We are also the #1 producer in North America for store-brand (“private label”) bleach and a leading private label provider of laundry detergent and additives, dishwashing products, general purpose cleaning and other home care products. Our global team of over 2,500 employees drive our capabilities in product development, product formulation, strategic sourcing, manufacturing, packaging design, brand marketing, project management, quality assurance, compliance, distribution, and logistics. Our organization is constantly evolving and is driven by a set of “One KIK” values - a dedication to following through on commitments in a customer-focused, profit-motivated way; while never compromising on safety, ethics, or integrity. Essential Job Functions • Operate various high speed liquid filling machinery including but not limited to fillers, labelers, cappers, palletizers, depalletizes case erectors, and heat induction sealers case erectors, etc. • Examine and act on production orders to determine quantities to be manufactured, job specifications and or special instructions. • Maintain time and production records. • Maintain quality standards. • Conduct basic troubleshooting on the assigned equipment and perform minor equipment adjustments and changeovers. • Follow Safety /GMP guidelines. • Comply with PPE, Good Manufacturing Practices, Standard Operating Procedures, Safety Standards, and follow all plant policies and procedures. The above statement describes the general nature and level off work only. They are not an exhaustive list of all required responsibilities, duties, and skills. Other duties may be added, or this description amended at any time. Qualifications • 1-2 years' experience as a Machine operator in the packaging industry. • Production knowledge of raw materials, production processes, quality control and other techniques for effective manufacturing preferred. • Must be able to verbally communicate, read and write in English. • Basic mathematics skills required. • Must be able to take direction and work unsupervised A Career with KIK Offers: KIK offers very competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. Thank you for your interest and consideration of a position with KIK Consumer Products. *************** KIK is an Equal Employment Opportunity / Affirmative Action employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law. Privacy Policy: https://***************/privacy-policy-applicant