Production worker jobs in Gallatin, TN - 192 jobs

TITLE Production Technician REPORTS TO Area Leader/Team Leader Work in a variety of areas, in production and packaging, to produce product for the company. KEY RESPONSIBILITIES Follow all company Safety Rules and Good Manufacturing Practices (GMP's). Produce high quality products in a safe and healthful manner. Assigned shift attendance is required. To work in all areas of production and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. Ability to work as part of a team. Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. The employee must be able to work 12 hour rotating shifts. The employees must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis. The employee must be able to squat or kneel and to bend on a frequent basis. The employee must be able to work in a cold (40-50 degree) environment. The employee must be able to tolerate exposure to flour and yeast materials. The employee must be able to climb steps on a frequent basis. VISION Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to high.

PLEASE NOTE THAT WE DO NOT CURRENTLY HAVE ANY OPENINGS. THIS APPLICANT POOL IS A PLACEHOLDER FOR INTERESTED CANDIDATES TO APPLY AND WE WILL REVIEW APPLICATIONS FROM THIS POOL WHEN WE HAVE ANY FUTURE OPENINGS. About NewBasis, LLC: Combining over 30 years of industry experience with the most recent advances in materials, engineering, technology, manufacturing and service. We manufacture pads and below ground enclosures for telecommunications, electrical, CATV, water, traffic, lighting, and industrial applications. Location: Lebanon, Tennessee A Day in the Life - Polymer Concrete (PC) Caster at NewBasis As a PC Caster at NewBasis, your day revolves around casting high quality covers and boxes using a variety of mold platforms. You'll prepare molds of different sizes, mix and pour polymer concrete, and reinforce each product with materials like fiberglass or rebar to meet strength and durability standards. The ideal candidate is hands-on, reliable, and committed to following procedures and best practices to meet production goals and reduce waste. What to Expect Each Day Safety First - Follow safety procedures, maintain a clean work area, and wear required personal protective equipment Pride in Quality - Produce products that meet customer and company standards Production Goals - Meet daily output targets for on-time customer delivery Work environment - Manufacturing facility with exposure to dust, noise, vibrations, and varying temperatures. Regular standing, bending, lifting, and use of hand tools and equipment. What will help you thrive in this position? Basic understanding of manufacturing processes and materials handling. Working knowledge of tools, common production equipment, and mechanical systems. Ability to read and interpret simple instructions, work orders, and engineering drawings. Manual dexterity and problem-solving skills. Physically capable of lifting up to 50 lbs., standing for long periods, and performing repetitive tasks. Good physical condition, attention to detail, and team-oriented mindset. High school diploma or GED preferred. Compensation & Benefits Employees in this position start at $22/hour and have the potential to earn an additional $1/hour after 90 days. Hourly employees are eligible for benefits the first day of the month following a 60-day waiting period. Benefits include medical, dental, and vision coverage with company-paid life insurance, 401k retirement plan (with matching), voluntary LTD, STD, spouse and dependent life insurances. Schedule Experience a better work/life balance with a Monday-Thursday, 6:00am - 4:30pm schedule. Pre-employment Screening All employees are required to complete a pre-employment background check and drug screening. Newbasis provides equal employment opportunity to all applicants and employees without regard to race, color, religion, sex, sexual orientation, age, national or ethnic origin, veteran or military status, disability, as well as any other protected status under the law. New Basis will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if NewBasis is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting calcivilrights.ca.gov/fair-chance-act/. Newbasis reserves the right to make exceptions to modify or eliminate this document or its content. This document supersedes all previous policies, procedures or guidelines pertaining to this subject.

PLEASE NOTE THAT WE DO NOT CURRENTLY HAVE ANY OPENINGS. THIS APPLICANT POOL IS A PLACEHOLDER FOR INTERESTED CANDIDATES TO APPLY AND WE WILL REVIEW APPLICATIONS FROM THIS POOL WHEN WE HAVE ANY FUTURE OPENINGS. About NewBasis, LLC: Combining over 30 years of industry experience with the most recent advances in materials, engineering, technology, manufacturing and service. We manufacture pads and below ground enclosures for telecommunications, electrical, CATV, water, traffic, lighting, and industrial applications. Location: Lebanon, Tennessee A Day in the Life - Polymer Concrete (PC) Caster at NewBasis As a PC Caster at NewBasis, your day revolves around casting high quality covers and boxes using a variety of mold platforms. You'll prepare molds of different sizes, mix and pour polymer concrete, and reinforce each product with materials like fiberglass or rebar to meet strength and durability standards. The ideal candidate is hands-on, reliable, and committed to following procedures and best practices to meet production goals and reduce waste. What to Expect Each Day Safety First - Follow safety procedures, maintain a clean work area, and wear required personal protective equipment Pride in Quality - Produce products that meet customer and company standards Production Goals - Meet daily output targets for on-time customer delivery Work environment - Manufacturing facility with exposure to dust, noise, vibrations, and varying temperatures. Regular standing, bending, lifting, and use of hand tools and equipment. What will help you thrive in this position? Basic understanding of manufacturing processes and materials handling. Working knowledge of tools, common production equipment, and mechanical systems. Ability to read and interpret simple instructions, work orders, and engineering drawings. Manual dexterity and problem-solving skills. Physically capable of lifting up to 50 lbs., standing for long periods, and performing repetitive tasks. Good physical condition, attention to detail, and team-oriented mindset. High school diploma or GED preferred. Compensation & Benefits Employees in this position start at $22/hour and have the potential to earn an additional $1/hour after 90 days. Hourly employees are eligible for benefits the first day of the month following a 60-day waiting period. Benefits include medical, dental, and vision coverage with company-paid life insurance, 401k retirement plan (with matching), voluntary LTD, STD, spouse and dependent life insurances. Schedule Experience a better work/life balance with a Monday-Thursday, 6:00am - 4:30pm schedule. Pre-employment Screening All employees are required to complete a pre-employment background check and drug screening. Newbasis provides equal employment opportunity to all applicants and employees without regard to race, color, religion, sex, sexual orientation, age, national or ethnic origin, veteran or military status, disability, as well as any other protected status under the law. New Basis will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if NewBasis is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting calcivilrights.ca.gov/fair-chance-act/. Newbasis reserves the right to make exceptions to modify or eliminate this document or its content. This document supersedes all previous policies, procedures or guidelines pertaining to this subject.

Lewis Bakeries located in Murfreesboro, TN is looking to fill several Full Time, open positions at our bakery! As a General Helper, you will be responsible for operating and maintaining the continual running of machines and equipment, while also adhering to workplace safety, food safety and product quality guidelines. * Full-Time with required Overtime! * Starting wages as of 5/1/23 begin at $22.77/hr, with annual increases and shift premiums! * $500 Quarterly Attendance Bonus * Most competitive benefits package in the area: Blue Cross & Shield Medical, Dental, Vision, Life Insurance, Disability & Retirement plan... all for $41 a week employee only, and $53 a week for family!! * We work 24 hours, 6 days a week including every Saturday and Sunday. Shifts are 10-12 hrs. You MUST be able to work any shift available and be on a rotating shift until either placed on an open job/shift once qualified or when seniority grants a preferred shift.

Job DescriptionBenefits: 401(k) Opportunity for advancement Paid time off Benefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities Job Summary We are seeking a Mover/Production Technician to join our team! As such, you will be traveling to a different location each day, ensuring boxes and furniture are properly wrapped, and loading everything specified into a vehicle. You will also be responsible for securing the load properly to ensure nothing is damaged or destroyed, unloading the items at the destination, and providing excellent customer service to our clients. You will also be expected to help clean house contents once back at our location. The ideal candidate is comfortable working in all weather conditions, has strong customer service and communication skills, and can comfortably work on their feet lifting heavy objects. Responsibilities Travel to each location and ensure all boxes are properly packed, and all furniture is ready to move safely Load everything into the truck or vehicle with the team, taking care to make sure everything is well organized and the load is properly distributed Secure all boxes, furniture, and equipment before moving Unload all boxes, furniture, and equipment, placing them in the designated rooms as noted by the owners Maintain a safe, clean work environment Qualifications Strong communication and customer service skills Works well in a team environment Can comfortably work in all weather conditions Can lift and move heavy objects Can work on your feet for much of the day

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Engineered Air Movement, TAMCO is an innovative manufacturer of high-end, superior quality dampers and air control products that serve commercial, industrial, and institutional markets. With its high attention to detail for products that are durable, maintenance free, energy efficient, and unparalleled in performance, companies rely on TAMCO to provide comfort and mission critical and industrial cooling solutions. How you will make an Impact (Job Summary) SPX TAMCO is a diverse team of unique individuals who all make an impact. You will be an active member of the assembly team building dampers per job order tickers, blueprints, manuals, engineering memos, or sketches. What you can expect in this role (Job Responsibilities) While each day brings new opportunities at SPX, your core responsibilities will be: 1. Safety Follow all safety rules and adhere to core value of business Maintain clean, orderly work areas and equipment Ensure proper and effective operation of equipment and tools. Report repairs and/or issues to team lead or supervisor 2. Quality Ensure all parts and surfaces are free from defects Monitor quality of own work and immediately report defective material, unusual conditions, and/or operating difficulties to team lead or supervisor Perform light maintenance on tools, equipment, machines, and other devices used in the normal course of the work performed 3. Delivery Able to read shop orders Cut aluminum extrusions to length Operate punch press Assemble dampers according to shop orders Daily documentation of work performed 4. Culture Desire to do the right thing Team player, assisting other team members and departments as needed with other duties not routine to position Punctual, on time, ready to work, every day What we are looking for (Experience, Knowledge, Skills, Abilities, Education) We each bring something to the table, and we are looking for someone who has: Required Experience Prior experience in a manufacturing environment Mechanically inclined Preferred Experience, Knowledge, Skills, and Abilities Excellent attendance Positive attitude Ability to communicate verbally and written Ability to follow instructions, work independently, and as a team Attention to detail Process improvement mindset Safety oriented Education & Certifications High school diploma or equivalent Travel & Working Environment The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Lifting to 50 pounds with assistance Sitting, standing, walking, bending, grasping, pushing, pulling, crawling, climbing, twisting, reaching, and working at heights Perform repetitive motions Plant environment with potential exposure to harsh weather, excessive heat/ cold, and/or excessive noise How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave Competitive health insurance plans and 401(k) match, with benefits starting day one Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential. SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.

Department : Production Reports to : Team Leader Summary/Objective The Team Member position is to ensure that quality parts are being finished and that any non-conforming parts are reported and removed for disposition.They will also contribute to a work environment where fairness, equality and non-discriminatory practices are the standard. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Following the job instruction provided by the Group Leader. Meeting daily job assignment standards. Ability to rotate within the assigned work station in a line or within other lines. Immediately inform the Group Leader/Team Leader of any visual and/or physical defects in production pieces that appear at your work station. Reference operation instructions. Trim pieces without creating any defects. Perform additional trimming of flash to enable a part to meet customer standard and requirements. Ensuring that no defective pieces are packed. Record any non-conforming parts on the productive reports. Ensuring all conforming parts are correctly packed according to packaging standards. Ensure that all aspects of his or her area of responsibility is in full compliance with the quality system in place at the operation at all times. Ensure there are no quality or production interruptions due to lack of giving or seeking information by fully informing the Production Manager of all events affecting production and the shift. Maintain a productive working environment by good communication, cooperation, positive habits and attitudes. Record information on scrap sheets and/or downtime sheets regarding scrap parts, and information about machine, equipment and fixture problems. Follow company safety rules 100% of the time. Reading, understanding and complying with company safety rules as designated by the YAPP USA Automotive Systems, Inc. Employee Handbook and outlined by the Job Safety Guide. Take action to promptly correct or remove all workplace hazards and unsafe work conditions. Competencies Problem Solving/Analytical Technical Skills Communication Proficiency, written and oral Attendance/Punctuality Dependability Ethical Conduct Supervisory Responsibility This position as no supervisory responsibilities. Work Environment This job operates in a manufacturing environment.While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to grasp small items, handle, or feel; and reach with hands and arms. Summary/Objective The Team Member position is to ensure that quality parts are being finished and that any non-conforming parts ate reported and removed for disposition.They will also contribute to a work environment where fairness, equality and non-discriminatory practices are the standard. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Following the job instruction provided by the Group Leader. Meeting daily job assignment standards. Ability to rotate within the assigned work station in a line or within other lines. Immediately inform the Group Leader/Team Leader of any visual and/or physical defects in production pieces that appear at your work station. Reference operation instructions. Trim pieces without creating any defects. Perform additional trimming of flash to enable a part to meet customer standard and requirements. Ensuring that no defective pieces are packed. Record any non-conforming parts on the productive reports. Ensuring all conforming parts are correctly packed according to packaging standards. Ensure that all aspects of his or her area of responsibility is in full compliance with the quality system in place at the operation at all times. Ensure there are no quality or production interruptions due to lack of giving or seeking information by fully informing the Production Manager of all events affecting production and the shift. Maintain a productive working environment by good communication, cooperation, positive habits and attitudes. Record information on scrap sheets and/or downtime sheets regarding scrap parts, and information about machine, equipment and fixture problems. Follow company safety rules 100% of the time. Reading, understanding and complying with company safety rules as designated by the YAPP USA Automotive Systems, Inc. Employee Handbook and outlined by the Job Safety Guide. Take action to promptly correct or remove all workplace hazards and unsafe work conditions. Competencies Problem Solving/Analytical Technical Skills Communication Proficiency, written and oral Attendance/Punctuality Dependability Ethical Conduct Supervisory Responsibility This position as no supervisory responsibilities. Work Environment This job operates in a manufacturing environment.While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to grasp small items, handle, or feel; and reach with hands and arms. Position Type/Expected Hours of Work This is a full-time position, and hours and days of work are determined by their shift. Working overtime and/or weekends may be required as necessary. Travel Travel is not expected. Required Education and Experience High School Diploma or GED Preferred Education and Experience Six months experience in a manufacturing environment. Additional Eligibility Qualifications Adaptability Quality Good Safety Record Teamwork Work Authorization/Security Clearance 1. Must have valid working documents to work in the United States.. AAP/EEO Statement To provide equal employment and advancement opportunities to all individuals. Employment decisions at YAPP USA will be based on merit, qualifications and abilities. Employment decisions shall comply with all applicable federal, state and local laws prohibiting discrimination or harassment in the workplace. YAPP USA does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability, weight, height, familial status, veteran status, or any other characteristic protected by law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Job Type: Full-time

First Brands Group is a proud equal opportunity employer. We are deeply committed to building a workplace and global community where inclusion is valued. Employment decisions at FBG are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex, or age. All qualified applicants will be considered for employment without regard to the above forementioned as well as, gender, gender identity family/marital status, sexual orientation, national origin, age, past or present military veteran status, or any other non-merit based or legally protected grounds. FBG will not tolerate discrimination or harassment based on any of these grounds or characteristics.

BU2 Thermal and Fluid System Your Contribution The Assembly Producer will operate a press or assemble parts to form complete units or subassemblies at a press, filling machine, or conveyor line. Position is responsible for both accurately and thoroughly completing and maintaining all daily paperwork associated with the assembly process. Your Experience & Qualifications * Ability to read gauges and record findings * Ability to measure sizes of parts in millimeters * Ability to use a computer, especially SAP, OEE and label programs. * Attention to detail and ability to maintain a high quality orientation * Move product, material, and/or equipment to and from designated areas * Maintain clean, organized, safe working environment with equipment and materials located in proper locations in accordance with 5S standards inside and outside of facility * Safely and efficiently operate all machinery * Perform work in an environmentally conscious manner and reduce waste * Ability to work all designated shifts * Excellent attendance record * Ability to work in a team environment * Other duties as assigned Our Offering We will provide a collaborative environment working on exciting assignments, along with ongoing personal & career development opportunities. We encourage you to apply even if you don't meet every single requirement. You may just be the right candidate for this or other roles! After receiving your online application, the interview process will typically be, a screening call followed by Personal Interview(s) For more information about MAHLE and what a career with us looks like for you, click here. and to learn more about our foundation owned technology group click here. #DiversityMatters with our inclusive culture, we welcome applications from all social, religious & ethnical backgrounds, disabilities both mental and physical, identities (gender) and neurodivergent people. Do you have any questions? ************************ US Facts about the job Benefits: Entry level: Production workers / General labor Part- / Full-time: Full Time Functional area: Production Department: BU2 Thermal and Fluid System Location: Murfreesboro, TN, US, 37127 Company: MAHLE Filter Syst.(US) Closing date for applications Don't waste any time, apply while the position is online. Your future at MAHLE As a team player and someone who thinks ahead, you can deploy all your skills with us. In cooperation with colleagues from different countries and areas, you contribute in designing the mobility of the future. When selecting MAHLE, you choose trend-setting technologies and strategies. Are you interested in working with us and developing efficient and environmentally-friendly solutions, optimising existing products, and turning innovative ideas into reality? Then MAHLE is the right address for you. Shape the future with us.

Job Description Responsible for operating various types of machines, and assembly stations in manufacturing operations. Operators will adhere to all safety, quality, inventory, policies, and production procedures. PRIMARY RESPONSIBILITIES 1. Adheres to company policies, standard operating procedures, quality, and safety Instructions. 2. Completes work orders on-time, and accurately records all daily production logs/forms. 3. Reads blueprints and work orders to determine product specifications, tooling instructions, assembling instructions, packaging instructions, and plans operational sequences. 4. Understands correct parts related to job, and checks for correct gauge, and dimensions. 5. Completes first piece inspection ticket at the start of each shift or changeover. 6. Responsible for quality control and continues inspection for defects. Adjust equipment as necessary to produce product within specifications. Inspects quality of finished assemblies. Rejects product outside of specifications and follow non-conforming and scrap procedures. 7. Ensure material is properly identified prior to moving and after moving. 8. Execute transactions within ERP utilizing bar code scanners, tablets, or computers. 9. Ensure proper placement of tools and perform required routine daily maintenance. 10. Monitor and report status of equipment and assist with all changeovers. 11. Keep work place safe, clean, organized and communicate progress with other shifts. 12. Perform other duties as assigned. Powered by ExactHire:189547

APCOM, an acronym for Appliance Components, is a leading global manufacturer of reliable water heating and appliance components that provide product differentiation at a competition price. Founded by Mike Grace in 1969, APCOM started in a 10,000 sq. ft. building and has since grown to three locations in the United States as well as facilities in Mexico, China and India. Our international locations focus on local markets and best practices are leveraged between all facilities. In 2001, APCOM joined the A. O. Smith Corporation family of companies and manufactures 75 million parts annually, with 60 million produced in the United States. Primary Function APCOM's facility in Franklin, Tennessee, is a facility that manufactures water heater components. The Production Operator will initiate manufacturing operations in accordance with customer requirements and monitor performance to optimize production processes. Responsibilities Operator will be responsible for the manufacturing of water heater components per department standards. Operators will cross train on operations in each department and follow quality and safety standards. Must be able to work with automated machinery and have the ability to perform troubleshooting tasks in order to increase machine up time. Some areas may require the ability to read blueprints, read a tape measure, and wear specialized PPE. Must be able to perform other duties as assigned. Qualifications High School Diploma or GED. Basic computer knowledge. No previous related work experience required; we will provide training. Must have physical stamina to work in industrial production setting with repetitive movement up to 8 hours at a time. Frequent bending, stooping, crouching, pushing, pulling, and reaching for extended periods. Continuous periods of walking, sitting, and standing. Must be able to lift and/or move heavy objects up to 50lbs unassisted.

Job Description The rate is $18-$24/hour range. involves processing various materials for the lamination process. job includes slitting, rewinding, and waste removal of laminated stock, war materials, or printed rolls. Attention to detail to make quality products. ESSENTIAL DUTIES AND RESPONSIBLITIES Load and unload rolls of stock to be processed. Remove questionable material and splice web (in register if necessary.). Hit production targets. Troubleshoot Machine and make adjustments. Trim material to the proper slit width to include the set-up for various widths. Perform quality check and enter data in the Infinity database. Cross train in other areas as needed. QUALIFICATIONS Minimum of High School Diploma. Experience running slitter machine or lamination machine

Job Description Join the TA team and work with our esteemed clients as a Machine Operator.Must be hands-on, detail-oriented, and ready to keep production running smoothly always ensuring top quality products are produced. We're looking for a skilled Machine Operator to set up, operate, and maintain machinery in a fast-paced environment. Benefits: Health, dental and vision insurance Referral Bonuses Life insurance Performance based increases Top out at $26.40 per hour What You'll Do: Operate and monitor machines to ensure top performance Conduct basic maintenance and troubleshooting Follow safety procedures and quality standards Keep records of production and machine performance What You Bring: Experience in machine operation (preferred but not required) Strong attention to detail and problem-solving skills Ability to work independently and in a team Commitment to workplace safety Math Skills required Why Join Us? Growth opportunities, great team culture, and the chance to work with cutting-edge equipment. Apply Now! Don't miss this opportunity to be part of a high-performing team.

Lasko Products, an industry leader of home environment products for over 100 years, is looking to add Production Operators to our light manufacturing facility in Franklin, TN. The Production Operator performs production line work in the assembly, molding, and/or press department including but not limited to assembling product, operating machinery, and finalizing products to prepare them for shipment. We offer a competitive hourly rate, paid time off, and comprehensive benefits. Essential Functions: Perform work in a productive manner, maintaining speed and accuracy while following safety, quality, and production standards. Assembling product on the production line with consistent speed and accuracy to meet production targets. Operating machinery and inspecting produced parts to ensure timely delivery to the assembly department for final production. Keeping workstation and production area clean and safe. Stocking production area with assembly components. Inspecting assembly components and finished product to ensure quality standards are met. Testing finished product for compliance. Making minor repairs to assembled product as needed Reporting any issues to line lead or supervisor if needed. Other tasks as assigned. Competencies and Abilities: Ability to work as part of a team Physical dexterity Good communication skills Positive attitude Previous experience working in a manufacturing setting is a plus Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Work Environment: Manufacturing environment--exposed to dust, odors, and noise. About Lasko Products Better Air Starts Here. Lasko Products is the leading air solutions brand with a reputation for reliable products, peak performance, and perpetual innovation - our commitment to our customers for over a century. Founded in 1906 by Henry Lasko in Philadelphia, Lasko has evolved for over a century to become the global leader in air solution products. From our roots in small appliances, fans, and portable heaters, we've grown to become the leading home comfort company while maintaining our unwavering commitment to quality and value. Today, Lasko stands as a symbol of innovation, offering consumers around the world high-performance products; portable fans, heaters, air purifiers, humidifiers, and home ventilation solutions. Our well-known brands, such as B-Air, Air King, and Guardian Technologies, serve both consumer and commercial markets across North America and internationally. As an American company, we take pride in upholding the spirit of hard work, trust and accessibility, ensuring that Lasko remains available to all, for generations to come. Headquartered in West Chester, Pennsylvania, with manufacturing and distribution facilities nationwide, Lasko continues to set the standard in the air solutions category for another 100 years. Lasko's mission is to enhance lives by creating comfortable environments with innovative products you can trust. The company's success is based on Five Core Values: Be Bold Challenge the status quo Courageously pursue the impossible Reject mediocrity Be Together Work together for success Drive trust and candor with each other Prioritize "We" before "I" Be A Leader Lead with personal conviction Inspire each other to deliver high- quality results Leverage resilience and agility to drive excellence Be Accountable Consistently deliver to our customers Embrace commitments as a contract Take pride in our actions Be The Change Demonstrate a passion to win Make a difference at work in our communities Step forward and take initiative Why Join Lasko? At Lasko, we believe people do their best work when they're supported ---- personally and professionally. That's why we offer flexible hours and a hybrid work schedule for our corporate team, promoting employees to balance life and work in a way that fits their lifestyle. Our dog-friendly corporate headquarters adds a fun, welcoming atmosphere, while our competitive salaries with bonus potential recognize and reward your contributions. We also offer a comprehensive benefits package that includes a strong 401(k) match, wellness incentives, and robust health coverage. Join Lasko and be part of a legacy of innovation - at a company that values flexibility, growth, and a culture where you can thrive.

Are you looking for your forever career? Do you strive for success? Come join our Pan-Oston family and enjoy a great working experience with us! Pan-Oston Company is an industry leader in providing metal and wood fixtures to some of retails largest members and is a Houchens Industries Employee-Owned Company - when the company does well, the employees do too! What We Offer: ESOP Retirement (Entirely employer funded retirement) Competitive health insurance prices Employer paid Dental and Vision Insurance Multiple wage progressions over 18 months Opportunities for growth Employer provided group Short and Long Term Disability Employer provided Life and AD&D Insurance Pan-Oston is seeking high-potential, highly motivated and skilled team players to join our team! We have an immediate opening for the following position: 2nd Shift Machine Operator Qualifications ESSENTIAL FUNCTIONS OF THE POSITION: Work in a fast-paced environment Operate specialty machinery to fabricate products Maintain and monitor machine to make sure it functions properly Understand how operated machine works Verify adequate materials and supplies are available to complete operations as needed Operate/monitor equipment during production to ensure quality and minimal unplanned stops Communicate with team members as needed to ensure production of the correct product with minimal wasted time and materials Report defective machine or materials to management Maintain work area and equipment in a clean, orderly condition and assist in other work areas Complete and maintain paperwork for parts Observe and follow company safety rules and regulations Perform appropriate duties as assigned MINIMUM POSITION REQUIREMENTS (Skills & Abilities) Ability to read blueprints and production schematics Aptitude for math, problem-solving, computers, and mechanics Attention to detail Ability to work and communicate well with others Proficiency with hand tools Willing to perform repetitive tasks and stand for extended periods Must be able to frequently lift/push/pull objects that are 40 pounds or heavier Ability to work second shift hours Why Pan-Oston? Here at Pan-Oston, our work experience includes a great working environment with talented and dedicated employee-owners, a competitive salary and benefit package, as well as participation in North America's largest ESOP. We invest in our people, bringing real-world experience that enables us to solve our customers' diverse challenges of today and anticipate those of tomorrow. While we expect the best we also want to give our employees the best! Work Environment While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee is occasionally required to bend, walk and reach with hands and arms. Specific vision abilities required by this job include close vision. Pan-Oston is an Equal Opportunity and Affirmative Action Employer and is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of race, sex, color, religion, age, disability, pregnancy, citizenship, sexual orientation, gender identity, national origin, protected veteran status, genetic information, marital status, or any other consideration defined by law.

TITLE Production Technician REPORTS TO Area Leader/Team Leader Work in a variety of areas, in production and packaging, to produce product for the company. KEY RESPONSIBILITIES * Follow all company Safety Rules and Good Manufacturing Practices (GMP's). * Produce high quality products in a safe and healthful manner. * Assigned shift attendance is required. * To work in all areas of production and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. * Ability to work as part of a team. * Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. * While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. * The employee must be able to work 12 hour rotating shifts. * The employees must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis. * The employee must be able to squat or kneel and to bend on a frequent basis. * The employee must be able to work in a cold (40-50 degree) environment. * The employee must be able to tolerate exposure to flour and yeast materials. * The employee must be able to climb steps on a frequent basis. VISION Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to high.

Manufacturing, innovation, and happy pets too. We are excited to announce that we are looking for a Production Operator: Freeze Dry - Weekend Shift to join our rapidly growing company. With thirty years of growth in the global pet food sector, our ORIJEN and ACANA brands define our vision of being The Global Leader in Advancing Premium Food for Pets. If you are passionate about personal and professional growth and see yourself as a key player contributing to our continued success by working in our award-winning company - we would love to hear from you. Summary We have a Production Operator position-Freeze Dry. This position is a weekend shift. These positions require demonstrated mechanical and technical skills necessary to operate the equipment safely and efficiently. These positions play a critical role in continuous improvement through identifying both equipment and procedural changes. Responsibilities Confer with the Supervisor and/or Team Leader to determine scheduled production runs and associated mixing or packaging requirements. Perform daily inventory of all dry and fresh ingredients and accurate recording of levels. Unloading of trucks including proper receiving and inventory transactions. Operate heavy machinery including grinding equipment for fresh meats and ingredients, and/or automated and manual packaging equipment in a safe and efficient manner. Develop and maintain successful professional working relationships, including good communication practices with relevant production department staff. Participate in annual physical inventory as determined by the Company. Maintain a neat and organized work area according to established corporate policies, procedures, and safety regulations. Perform other work assignments, as requested or required. Requirements High school diploma or GED. Minimum 2-3 years' experience in a manufacturing environment, or equivalent military experience, or college degree. 2-3 years' experience operating food processing machinery is preferred. Mechanical aptitude and adept with tools and equipment, including ability to accurately complete required paperwork. Demonstrated leadership skills and interpersonal skills with ability to work successfully both independently and as a part of a team. Ability to communicate effectively, both verbally and in writing. Willing to work any shift as necessary. Willing to work overtime as necessary or required. Benefits Top out on 1-year anniversary Medical, Dental and Vision benefits start Day 1 Three weeks' vacation Annual Bonus Program Company match 401k Free premium pet food Uniforms, safety footwear and PPE provided Tuition Reimbursement On the Job training Climate Controlled, state-of-the-art manufacturing facility Come as you are. We value diversity in all forms and know the power it can bring. Workplace equality allows for creative ideas to bloom, diverse points of views to be heard, and increases overall happiness. That sounds pretty good to us. Champion is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, gender identity, disability, age, veteran status, or any other status protected by applicable law. The base pay range for this position at commencement of employment is expected to be between the range listed above, however, base pay offered may vary depending on multiple individualized factors, including but not limited to, market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements, if eligible, including variable pay, medical and dental benefits, participation in 401k plan, and paid time off benefits. Eligibility for these additional elements depend on the position offered and the employee's work schedule (i.e., part-time schedule, store associate). Details of participation in these benefit plans will be provided if an applicant receives an offer of employment.

Do you have experience in production? Luttrell Staffing Group is currently hiring Kanban / Machine Operator positions Scottsville, KY. $15-17 / Hour (Based on shifts and weekends) 1st, 2nd, and 3rd 8 hour shifts OR Rotation 12's 7am-7pm / 7pm-7-am Full-Time | Temp-to-Hire Zero Fees - you'll never be charged for any screening service Fast Start Date Weekly Pay Job duties for Kanban / Machine Operator: Loading and unloading shipments, stocking and picking parts - customer orders and kanbans Stocking, transferring, picking, wrapping and other tasks involved with S/R process Check product labels, packing lists and receipts and follow abnormal procedure when required Check paperwork and product conditions on inbound shipments when needed and follow rules if any errors or damage found Record deliveries Check paperwork and product conditions on inbound shipments when needed and follow rules if any errors or damage found Monitor product flow in and out of shipping to ensure safety and all S&R work instructions are followed Maintains the work area and equipment in a clean and orderly condition Notify Leader, Coordinator, or Supervisor if system errors occur Completes any other related tasks as needed Qualifications for Kanban / Machine Operator: High school diploma or equivalent Must wear required PPE (Bump caps, safety toe shoes, safety glasses, masks, ear plugs, harness, gloves, aprons, etc.) Must have valid driver's license Capable of operating a pallet jack Ability to obtain picker, forklift, and stand-up lift certification Ability to work heights of 18 ft Ability to stand for duration of shift Ability to lift up to 60 lbs Ability to stoop, bend, squat, kneel, twist and reach Please apply by clicking on the link below, then call or text (270) 782-2226.

Lewis Bakeries located in Murfreesboro, TN is looking to fill several Full Time, open positions at our bakery! As a General Helper, you will be responsible for operating and maintaining the continual running of machines and equipment, while also adhering to workplace safety, food safety and product quality guidelines. Full-Time with required Overtime! Starting wages as of 5/1/23 begin at $22.77/hr, with annual increases and shift premiums! $500 Quarterly Attendance Bonus Most competitive benefits package in the area: Blue Cross & Shield Medical, Dental, Vision, Life Insurance, Disability & Retirement plan... all for $41 a week employee only, and $53 a week for family!! We work 24 hours, 6 days a week including every Saturday and Sunday. Shifts are 10-12 hrs. You MUST be able to work any shift available and be on a rotating shift until either placed on an open job/shift once qualified or when seniority grants a preferred shift. Qualifications Requirements: Physical requirements include repetitive lifting/stacking up to 25lbs overhead , pushing/pulling heavy carts of materials, lifting 50lbs of ingredients and other physical labor as needed. Must be able to work in extreme hot or cold conditions as some areas of the plant can be hotter than others, especially in the Summer. All candidates must successfully pass pre-employment steps including background check and drug screen. Apply right here on Indeed! Due to COVID-19, visitors will not be permitted inside the bakery. Once your application is submitted, please wait for a phone call from our HR department to discuss next steps.