Quality control analyst jobs in Apple Valley, CA - 45 jobs

The Quality Control Training Analyst reviews previous day's admissions, registrations, insurance notification faxes, and identifies and corrects all demographic information, reviews required forms to ensure appropriate fields are checked, signed, timed, dated and witnessed. Records errors by registrar and provides report to manager. Responsibilities The Specialist verifies all 'unable to sign' patients and makes an attempt to obtain required signatures and documents efforts in account, reports to manager daily. Trains all new hires and or existing staff and completes competency for each area employee was trained. Provides competency and feedback to manager upon completion. Qualifications Minimum of 5 years hospital experience in registration, and or insurance verification. High School diploma or equivalent. Ability to type with accuracy at a rate of 25-30 wpm. Ability to work well and remain calm in time of stress. Bilingual preferred. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.

The Quality Control Inspector (QA/QC) is responsible for implementing quality control and safety plans to ensure compliance with contract specifications, applicable regulations, and company standards. This position inspects all phases of goods, services, and operations to verify conformity with established quality health, and safety requirements. The Quality Control Inspector (QA/QC) performs ongoing inspections to ensure all work meets contractual provisions, confirms that services listed on the performance requirement summary are completed in satisfactory manner, and determines areas to be inspected- both scheduled and unscheduled- as well as the frequency of inspections. This position requires communicating deficiencies to appropriate personnel, maintaining Quality Control files, and documenting the results of inspections. Performs all other position -related duties and assigned or requested. A valid Class A Commercial Driver's License (CDL-A) is required for this position to meet the scope of contract operations. Minimum Requirements High School graduate or equivalent. Must be able to speak, read, write, and understand English. Able to operate and inspect machines or equipment to diagnose defects and submit a request for replacement parts. Dismantles and reassembles equipment, using hoists and hand tools. Examine parts for damage or excessive wear, using micrometers and gauges. Identify defective engines and subassemblies, such as transmissions, and tests overhauled equipment to ensure operating efficiency. Performs scheduled and unscheduled maintenance, repairs, and adjustments of all heavy machinery to ensure the equipment remains fully mission capable for mission support. Performs a variety of collateral duties such as handling, containment, clean-up and disposal of hazardous waste, etc. Operates all heavy equipment and forklifts up to and including 50,000 pounds lift capacity, and a variety of other equipment to trouble shoot faults and validate repairs. Understands and uses safety items and personal protective equipment (PPE) that is mandatory and actively supports the EHS safety program. Required to walk, stand, sit, and move about the property for long periods of time. Required to perform physical activities that require considerable use of the arms and legs and moving the entire body, such as climbing, lifting, balancing, stooping to handle materials. Work in a noise level can range from minimal to intense. Able to lift and/or move up to 50 pounds. Possess a Valid California Commercial Drivers' License (CDL). Must be a US Citizen or able to work in the US. PD Systems is an equal opportunity employer and prohibits discrimination and harassment of any kind. Employment decisions at PD Systems are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Temp Connect Staffing is actively recruiting skilled candidates for Quality Control positions in Riverside County, CA, and beyond! This job order has been posted as a waitlist to help pre-qualify candidates to be contacted when we receive new opportunities. Schedules: 1st, 2nd, or 3rd shifts Pay Range: $17.00 - $26.00 per hour (based on position availability) General Requirements: Recent experience in quality control or quality assurance in a production environment. Proficiency with measuring tools, inspection equipment (e.g., calipers, micrometers), and software (e.g., Microsoft Office or quality control software). Ability to identify problems, analyze potential solutions, and implement corrective actions to maintain product quality. Willing to submit to background and drug screenings. Ability to stand for extended periods. Must be reliable, punctual, and able to work in a fast-paced environment. Prior experience in positions such as Quality Control Inspector, Quality Control Analyst, Quality Assurance Technician, or Quality Control Coordinator is a big plus! Be 18 years or older. Benefits: Affordable Health and Dental Plans Cal-Savers Benefits Referral Program Responsibilities may include: Examine incoming materials to ensure they meet specified quality standards before they enter the production process. Continuously check production lines to ensure products meet quality standards throughout the manufacturing process. Perform tests (e.g., visual inspections, measurements, and functional tests) on finished goods to ensure they meet specifications. Record and maintain accurate documentation of inspection results, testing procedures, and quality control findings. Detect and report any defects or deviations from quality standards, ensuring immediate corrective actions are taken. Ensure measurement tools and testing equipment are calibrated and maintained properly for accurate testing results. How to apply on jobs.connectstaffing.com: Attach a resume when you “quick apply” to a job OR if you don't have a resume, please complete a general application with us first at hrcenter.ontempworks.com/en/CNN. Afterward, you may “quick apply” to any job without a resume. All applicants meeting minimum requirements will receive an SMS text inviting them to participate in an AI-based interview. This gives you the chance to describe your relevant skills and experience so you may be fully considered for each opportunity.

Works to ensure that the quality of orthotics is up to standard for shipping and measurements for orders are within the bounds of reasonability. We would like to get to know you more. Using Loom.com, please record an introduction video (maximum of two minutes) and tell us more about your passion and experiences. You will be asked to paste the link to the video on the application form. This position is remote and on -site in Riverside, CA. Responsibilities: Ensures quality of materials in orthotics Ensures that finished orthotics meet physical standards Orthotics are not too wide/narrow, too short/long, or etc... Verifies the legitimacy of orders placed Double -checks the orders placed by order entry Verifies measurements for modifications that seem highly unusual, if not impossible Requirements Previous experience in an orthotics lab Understanding of human biomechanics and anatomy High School Graduate or GRE equivalent Ability to work as a team member Capability of communicating across departments for quality control Meticulous with an eye for details

Looking for a Qualified and Passionate candidate experienced in Food Industry for a Quality Control of a leading food company. All food technologists or related College degree be accepted to apply. Having experience in deploying the application of HACCP, SOP, GMP; and being familiar with MS office such as Word and Excel are the advantages. Responsible for Writing or Editing Company Standards including but not limited to the Quality Program, HACCP Program, Food Safety Program, Good Manufacturing Program, Allergen Program, Site Security Program, Raw and Finished Product Specifications, Recall Program, and Micro Swabbing Program. Maintains HACCP Certified Coordinator status. Leads the Food Safety Team as Food Safety Coordinator and conducts periodic Mock Recalls. Responsible for monitoring the facility Pest Control Program to assure compliance with Local, State, and Federal requirements. Responsible for all product Nutritionals and Label Graphics artwork. Requirements: Must speak and write in English and Vietnamese Must be at least 18 years of age Work closely with team members Have reliable transportation Ability to stand for long periods of time Ability to perform job functions with minimal supervision, attention to detail, and speed US work authorization (Required) HACCP certified Benefits: Disability insurance Health insurance Vacation paid Sick paid Annual bonus Work schedule 8 hour shift Supplemental pay Signing bonus Benefits Paid training Other Referral program

Job Description Q/C Sanitation must have food production exp Job Posted by ApplicantPro

We have an exciting opportunity for a Quality Control Inspector with a leading manufacturing company specializing in airborne particle counters and microbial air samplers. As a Quality Assurance Clerk, you will play a crucial role in maintaining our commitment to excellence and ensuring our products meet the highest standards. Position Highlights: Location: Redlands, Ca Temp 3-6 months Pay Rate: $17- $19 DOE Schedule: 7am to 3:30pm, Monday Friday Responsibilities: Perform visual and dimensional inspections of in-process and finished goods, sub-assemblies, and components Maintain records and other documentation of inspection/test methods, procedures, and results Conduct and report internal audits and evaluations (as assigned) Assists in the investigation of non-conformances in mechanical assemblies Inspects final product for Q.C. release prior to shipping Identify and troubleshoot equipment problems and defects Review calibration certificates for accuracy Maintain a clean and safe work environment Must follow procedures established for ISO 9001 Quality Management System Other duties as assigned PRIOR WORK EXPERIENCE: 1+ years of manufacturing, electronics, assembly, or quality experience (preferred) Prior experience using a calculator, calipers, micrometers, tape measure, and drop indicators (preferred) ISO 9001 Internal Auditor Certified (preferred) Excellent Math and English skills are required. Bilingual is a plus. Strong Interpersonal Communication Skills: verbal and written Excellent organizational skills and attention to details Proficient in Microsoft Office Suite Requirements: EDUCATION: High school diploma or equivalency (required). Associates degree in electronics or a related field (preferred) Lift up to 20 lbs. Sit or stand for extended periods as required.

Inspects facility maintenance activities during and upon completion for conformance to manufacturers guidelines, regulatory requirements and company standards **Essential Duties and Responsibilities** + Conduct QC inspections and audits on contract requirements, and other services performed. + Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. + Checks randomly selected samples, and verifies accuracy of equipment or process. + Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. + Schedule inspection activities. **Knowledge, Experience and Skill Requirements** + Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. + Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. + A thorough understanding of ISO 9001:2015 standards + Knowledge of recognized and generally accepted good engineering practice regulations and codes. + Excellent analytical and computer skills, specifically in MS Office Suite. + Strong written and oral communication and presentation skills. + Strong teamwork and interpersonal skills **Work Experience** + Five (5) years of experience in quality management for facility operations & maintenance of industrial equipment at an industrial facility requiring compliance with ISO 9001. + Must hold Certified Quality Technician (CQT) certification through American Society for Quality. + Must have the communication skills required to interface and coordinate with others. + Experience working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals + Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned. **Education, Licenses and Certification** **Required:** + High School Diploma + OSHA Certification + Certified Quality Technician (CQT) certification through American Society for Quality. _This job description is subject to change by the employer as the needs of the employer and requirements of the job change._ J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Industry: Precision Manufacturing / Machining Shift: 2nd Shift (3:00 PM to 1:30 AM, 4/10 schedule) Pay: $24-$28/hour (DOE) Schedule Notes: Candidate will train on 1st shift (6:00 AM - 4:30 PM) during the first week. Upon successful training, they will move to 2nd shift (3:00 PM - 1:30 AM). Position Overview: Seeking an experienced Quality Control Inspector to perform dimensional inspections and first article inspections within a precision machining environment. Qualifications: • Proficient with micrometers, calipers, gauges, optical comparators, height gauges, drop indicators, etc. • Experience with standard QC measuring equipment • Able to perform First Article inspections with minimal supervision • Strong math and measurement skills • Familiarity with blueprint reading & work instructions • Comfortable in a fast-paced manufacturing environment • Proficient using Windows-based software • Strong communication skills; detail-oriented and organized Responsibilities: • Perform dimensional inspections (in-process, first article, final) • Read and interpret blueprints and specifications • Monitor production operations for conformance to specifications • Reject or tag non-conforming parts/materials • Communicate inspection findings and recommended adjustments • Perform additional related tasks as needed KPG123

Quality Inspector 1st Shift - Riverside, CA Portables M-F 6:30AM-3PM $20.12-$23.74Hr LUXFER GAS CYLINDERS is the world's largest manufacturer of high-pressure composite cylinders. We have a proven record for dependability and safety. American Made products that save the lives of firefighters and first responders!! JOB DESCRIPTION: You will perform inline quality inspections, checks, and tests during the manufacturing process. Records defects on a daily basis and may make recommendations for improving processes. As a Quality Inspector, you will work closely with Production to identify nonconforming materials on the shop floor. ACTIVITIES: The main activities of the position include but are not limited to the following: * Responsible for inspecting materials for quality and defects. * Inspects cylinders internally, externally, and dimensionally to ensure they meet all internal and external customer requirements. * Perform in-process inspection and final inspection. * Identify non-conforming material and notify the Quality Lead or Team Leader to generate non-conforming material reports. * Generate rework tags and send nonconforming material to various areas for rework. * Give feedback from personal experiences on the shop floor to help improve Production/Quality processes and possibly assist in implementing and testing out these new processes. QUALIFICATION/REQUIREMENTS: * Able to lift product and stand for extended periods of time. * Ability to read Pi-Tape, Calipers, Depth Gauge, and a weight scale. * Requires a high school diploma or its equivalent and 2 years of related experience. * Familiar with standard concepts, practices, and procedures within the quality function. * Relies on experience and judgment to plan and accomplish goals. * Demonstrated ability to troubleshoot and problem solve. * At least 18 years old * Able to pass a Drug Test * The acceptable outcome of a Background Check We are committed to a safe, drug-free work environment and pre-employment drug screening, physical and background checks are required prior to starting. Candidates must be authorized to work in the US. Luxfer Cylinders is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. Women, minorities and veterans are encouraged to apply. NOTICE FOR CALIFORNIA RESIDENTS Pursuant to the California Privacy Rights Act, if you are a California resident, you have the right to know the categories of personal information we collect and how it's used. Please visit the site below to access our California Privacy Rights Act Policy for candidates and employees. ******************************************************************************************************************************************

From Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Role OverviewThis is a full-time, on-site role for a Quality Control Inspector located in Ontario, CA. The Quality Control Inspector will be responsible for conducting inspections, ensuring quality control and quality assurance, and managing quality-related processes. The inspector will perform regular quality checks, document findings, analyze quality data, and maintain records. The role also involves collaborating with other team members to identify and address any quality issues and implementing corrective actions to ensure products meet the company's standards.Key Responsibilities Conduct in-process and final inspections of products to ensure conformance to standards. Perform regular quality checks, document findings, and analyze quality data. Maintain accurate and detailed records of inspections and test results. Collaborate with production teams to identify and address quality issues. Assist in implementing corrective actions to ensure products meet company standards. Ensure all processes and products adhere to industry standards and regulations. Required Qualifications Proven experience in Quality Control, Quality Assurance, and Inspection. Experience with Quality Management systems and processes. Strong communication skills. Excellent attention to detail and problem-solving abilities. Ability to work independently and as part of a team. Knowledge of industry standards and regulations. Associate degree or equivalent relevant experience. Preferred Qualifications Bachelor's Degree is preferred. Additional certifications in quality control or related fields are a plus. Previous experience in a manufacturing or fabrication environment is beneficial. Additional Requirements: Willingness to work long hours and weekends when needed to meet critical deadlines Willingness to travel to customers' locations or other Hera sites as needed Ability to use a computer and most common software programs to complete assignments Ability to communicate with individuals and groups in person, by phone and online Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The base salary is just one part of your total compensation package at Hera. You will also have access to a comprehensive set of benefits like: Company paid employee medical, dental and vision insurance Retirement plan participation (eligibility required) Paid Sick LeavePaid VacationPaid holidays Discretionary bonuses Physical Requirements / Work Environments· Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations· Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly· Visual acuity required for reading technical drawings and digital media· Valid US driver's license and ability to operate motor vehicles The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. EXPORT CONTROL REQUIREMENTS:To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Hera Technologies is an Equal Opportunity Employer, employment with Hera Technologies is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description This position is responsible for performing in-process, component and finished goods visual and dimensional inspections using SPC/AQL sampling plans to support production, incoming receiving inspection and Quality investigations as needed. These inspections utilize industry standard metrology and gaging methods to identify defects and ensure product meets customer requirements. This position works on the production floor sampling, performing visual inspections and assessing quality of the parts and process. Attention to detail and the ability to work with minimal amount of supervision and understanding of quality inspection tools and equipment is required. Essential Job Functions and Responsibilities: Perform dimensional and visual In-process and finished good inspection on parts/boxes per approved control plans, test methods and customer drawings. Quality / SPC evaluation when required per site documentation. Communicate with Machine Technicians, Operators and Production Supervisors inspections/SPC results to operation when defects are detected to ensure process adjustments are made and in an effort to run a consistent quality product. Review daily NCR reports, SPC charts and quality system documentation. Enforce and maintain our Quality System and provide suggestions to maintain our continuous improvement system. Visually and dimensionally evaluate product and packaging in accordance with established acceptance criteria and standards. Follow all Safety rules and guidelines. Report any unsafe condition or practice. Maintain a clean work area throughout the shift. Evaluate product documentation for adequacy and completeness. Visually and dimensionally evaluate product and packaging in accordance with established acceptance criteria and standards. Measure process performance against established acceptance criteria and standards. Record real time data and prepare formal reports. Other assignments as may be given by the Quality Engineer or Managers. Support maintenance and calibration requirements for Quality Lab and production floor Place non-conforming product on hold and create non-conforming records and assist with Quality inspections of rework product as needed. Partner with Quality Control department for the management of product retains. Update Quality Inspection requirements Assist in the creation, closure review and verification of completion of batch records and release products and issuance of certificates of compliance to ensure product produced meet the customer and regulatory requirements Assist with New Product validation as required. Participate in Gage Repeatability and Reproducibility (GR&R), Geometric Dimensioning and Tolerancing (GD&T or GD and T) Intermedium studies and product/process validations Review and release product for shipping though issuance of COC ensuring all Customer requested documents are provided at the time of shipment Maintain cleanliness of QC lab, implement and sustain 6S, Quality boards and speak to status of site Quality metrics Able to generate and reconcile Labels (as needed) Perform Environmental monitoring activities according to site procedures. Train Quality personal on environmental monitoring activities and clean room requirements. Other assignments as may be given by the Quality Supervisor or Plant leadership team. Core Competencies: Statistical Process Control Knowledge Cosmetic, visual and dimensional Inspection Housekeeping General Safety Communication & Teamwork Skills Computer literate. Good verbal and written communication skills. Ability to perform standard measurement and test equipment. Attendance-dependability Time Management IQMS Knowledge Inspection Skills Organizational Skills Basic math skills Metrology Blueprint Reading Data Entry Skills Knowledge, Skills, and Abilities Read and write in the English language. Must be able to perform basic math such as addition, subtraction, multiplication, division, fractions, and decimals. Ability to read and interpret basic engineering drawings and product specifications. Proficiency with utilizing ANSI Sampling Plans Proficient in utilizing hand measurement tools (Caliper, Micrometer, Ruler, Gage Blocks, etc.) Experience with PCDMIS and Measuremind 3D automated inspection software usage (CMM, OGP, Smart scope, etc.) and programming a plus Knowledge of Medical device standards and Regulations (ISO 13485) Ability to read and decipher blueprints Knowledge of GD&T Experience with handling non-conforming material Experience with device history record creation and review Knowledge of ERP and quality system elements Proficiency in using Microsoft Excel, Access Database and Word Experience in supporting process validation activities including testing and Gage R&R Knowledge of sample plans creation is a plus Understanding of risk management is a plus Education and/or Experience: High School Diploma or GED. Minimum 6 months factory related experience in a regulated industry. Minimum of one year experience in visual and dimensional evaluation of molded products; or minimum three years experience in plastic injection molding and assembly processes Experience with calipers and micrometers is required; Other inspection equipment such as indicators, height gage, & pin gauges are a plus. Should have prior experience in a manufacturing environment to understand normal safety requirements. Certified Quality Inspector or Technician a plus

Job DescriptionBenefits: Dental insurance Health insurance Paid time off Profit sharing Vision insurance D.W. Mack Co., Inc is seeking a full time Junior Quality Inspector to join our team. You will conduct tests to determine the quality of finished materials and finished products. Alternative Workweek Schedule -Hours are Monday - Thursday 7:00am - 5:30pm Benefits include: Health, dental, vision, life insurance, profit sharing, vacation, sick pay Responsibilities: Inspect in-process production by confirming specifications, conducting visual measurement tests, and communicating required adjustments to the production supervisor or machine operator. Approves finished products by confirming the specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor. Documents inspection results by completeing reports and logs. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs. Maintains a safe and healthy work environment by following standards and procedures, and complying with legal regulations. Be a team member of the Quality department and support production and other internal departments to further th interest of the company. Qulaifications: Previous work experience in quality control or other related fields Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication Basic computer and math skills to calibrate and measure specifications Blueprint reading Ability to use measuring devices such as gauges, meters and calipers Experience in the Aerospace industry a Plus Conversational Spanish a Plus About D.W. Mack Co., Inc : D.W. Mack Co., Inc. is a family owned business that has been in operation since 1969. We are a Tool & Die stamping house with in house Die making, EDM, CNC mill & CNC lathe capabilities. Most of our business is working with the aerospace industry. We are AS9100D certified.

Job Title: Quality Control Inspector Skills Required: In the Quality Inspector role, you will be responsible for inspection and quality services to ensure company products and processes meet customer, company, and other specifications. This role supports company initiatives, provides training and assists the Quality Control Manager. Essential Responsibilities: Comply with all quality, safety, and work rules and regulations. Evaluate problems and make initial recommendations for possible corrective action to supervisor. Participate in the construction and/or revision of SOPs for the inspection function. Provide support to production team when required. Visually and physically inspects materials, components, subassemblies, assemblies, tools, and final product configuration using blueprints, sketches, engineering drawings, and orders, and other applicable sources to observe, measure, record conformity to customer, regulatory, and company specifications. Records compliance with quality standards to verify that company products and processes meet customer, company, and other specifications. Solves inspection problems; methods-procedures, plans, and details. Audits products and processes to verify system. Maintains necessary inspection logs and writes inspection reports. Communicate quality problems and work with engineering and leads to support, investigate and resolve the quality issues. Perform all other duties as assigned. Minimum Requirements: Ability to manage multiple tasks, set priorities, identify, address problems and meet deadlines. Self-motivated with ability to work independently in a fast-paced environment with changing priorities. Computer skills to include Microsoft programs. Must be able to use computer programs to keep track of administrative tasks such as report writing, analysis of work orders, evaluations, etc. English skills must be proficient to understand, read, write and speak English. Ability to work overtime and weekends as required. Must be committed to the success of the entire organization. Physical Requirements: Must be able to stand and walk for prolonged periods of time. Must be able to lift and carry up to 25 lbs. Must be able to push, pull, twist, climb, balance, stoop, kneel, and crawl. Must be able to perform repetitive motions such as reaching and grasping. Must be able to use a ladder or step ladder. Work environment is in a warehouse and temperatures inside vary between hot or cold based on the outside conditions. This is a fast-paced environment with constantly changing priorities. Education/Experience: High School diploma or equivalent preferred. Minimum of 3 years of experience in a similar role or a combination of experience and education will be considered. Familiar with SQF 2000, HACCP, and GMP preferred. Experience in the plastic bottle industry or in a manufacturing environment is preferred.

Temp Schedule: Monday-Friday, 8:00 AM - 4:30 PM + OT & Weekends as needed Pay: $18-$19/hour (DOE) We are currently seeking a detail-oriented and proactive QC Line Inspectors to join our team and help ensure product excellence on the production line. This role plays a critical role in monitoring and verifying product quality during production. This position ensures that all products meet company specifications, customer expectations, and regulatory requirements. You'll work closely with Production and Quality teams to identify and resolve issues in real time. Key Responsibilities: · In-Process Quality Monitoring Inspect products during production to ensure quality standards. Monitor packaging, labeling, and coding accuracy. Verify lot numbers, expiration dates, and weights. · Documentation & Reporting Complete in-process quality check records. Document non-conformances and deviations. Communicate issues to Production and QA Supervisors. · Compliance & Standards Follow GMP, safety, and OSHA/Cal-OSHA guidelines. Ensure compliance with SOPs and customer specs. Support audit and inspection readiness. · Collaboration & Continuous Improvement Assist in implementing corrective actions. Participate in quality improvement initiatives. Help train employees on quality procedures. Qualifications: · Required: Must be bilingual and able to pass E-Verify. High school diploma or GED. 1+ year of QA or manufacturing experience. Strong attention to detail and ability to work in a fast-paced environment. Ability to read SOPs, batch records, and specs. Basic computer skills. · Preferred: Experience in GMP, ISO, and FDA-regulated environments. Familiarity with inspection tools (scales, calipers, gauges). Knowledge of ERP or quality management systems. Physical & Environmental Requirements: Ability to stand for long periods. Occasional lifting up to 25 lbs. Exposure to manufacturing environments.

Chemical Guys is more than a brand, it's a lifestyle with a worldwide following. Driven by adventure, a passion for shine, and a love for the road ahead, we welcome any and all who share this passion to become part of our family. When we started, we decided to wipe the slate clean and start off fresh with the simple idea to make the best quality chemicals manufactured right here in California to the highest quality standard. Over the years, we have grown into so much more: a huge library of detailing knowledge, a benchmark in the industry, group of friends with one common passion. Today, Chemical Guys has become a true omnichannel leader in automotive appearance industry with a massive social media following and product distribution around the World. But we know this is still just the beginning as we want to win in the long run, drive innovation, and refine the industry while having fun and smiling along with you. So, grab a wash mitt, some soap, put a smile on your face, and don't look back… it's going to be an unforgettable ride! Summary of Position The Quality Inspector is responsible for ensuring all products meet & exceed quality expectations from receiving of inbounds to finished good output in production. As a Quality Inspector, you will oversee all Quality Control processes performed in-house and work closely with the Quality Control Lead when performing investigations for root cause analysis & CAPA implementation in the spirit of continuous improvement. Job Responsibilities Perform in-house investigations to ensure adherence to internal standards across the following categories: Raw chemicals, finished goods, components, machines, accessories, etc. Maintain in-house internal finished good standards & label standards. Work alongside the Quality Lead in maintaining a non-conformance log & providing quality metrics to support KPIs. Execute & document unique projects from the testing of new components to the execution of planned E&O exercises. Monitor on-hand waste to schedule & support routine pickups. Perform product assessments, including but not limited to - -Physical: Color, Odor, Appearance, etc.-Analytical: Torque, Specific gravity, pH, Viscosity, etc. Be cross trained in operating QC lab equipment for performing in house testing, including but not limited to: pH testing, viscosity testing, specific gravity. Analyze product characteristics against established specifications/standards to determine disposition (i.e. pass/fail). Includes evaluation of several Certificates of Analysis (COAs) Adhere to basic principles of GLP & cGMP to expand these practices department wide. Perform timely escalations with strong communication skills using appropriate terminology. Under the guidance of the Quality Manager, facilitate & assist in unique audit requests & testing when required. Assist production, warehouse, and quality personnel as required. Location: 13481 Valley Blvd. Fontana, CA 92335 Compensation: $19/hr Job Type: Full Time with either temp to hire(benefits provided when you become perm. employee) or permanent hire from the start 30/60/90 Deliverables 30 Day Fully comprehend the concept of inbound inspections and be capable of verbally speaking to all processes the position is responsible for with clear explanations of how to perform & the value it brings to the organization. Build relationships with key team members & cross functional teams and provide a brief explanation of how their roles intertwine with the responsibilities of the QC Inspector. Manage an inbound receipt and approval/rejection tracker for all items inspected and provide weekly summaries of rejected materials. 60 Day Assist in Retains & Standards management and be capable of fully owning the process to support unique investigations. Support the Quality Lead in conducting investigations & take ownership of projects related to Non-Conformances (NCRs) in pursuit of timely escalations and closures. 90 Day Begin conducting trend analysis for rejected materials at inbound and provide a high-level summary including, but not limited to: items impacted, shared issue(s), quantities impacted, vendor information, etc Requirements Job Requirements Strong written & verbal communication skills in English. Proficiency in Spanish is a plus. High prioritization of safety and caution when utilizing sensitive laboratory equipment. Knowledge of basic mathematics to be able to understand & analytical data. Physically be able to climb ladders, stay on feet for a full 10hr shift and lift 50 lbs. Physically be able to obtain samples from containers up to 72” tall. Ability to prioritize & pivot daily activities driven by production urgency. Relentless attention to detail. American Society for Quality (ASQ) Certified Quality Inspector (CQI) preferred. Salary Description $19/hr

The Quality Control Inspector is responsible for performing inbound inspections, in\-house testing, and quality investigations to ensure all raw materials, finished goods, components, and accessories meet internal specifications and regulatory standards. This role works closely with the Quality Lead and cross\-functional teams to support continuous quality improvement. Key Responsibilities Perform in\-house investigations to ensure adherence to internal quality standards for raw chemicals, finished goods, components, machines, and accessories Maintain internal finished goods and labeling standards Partner with the Quality Lead to maintain non\-conformance logs and provide quality metrics supporting KPIs Execute and document special projects, including new component testing and planned E&O exercises Monitor on\-hand waste and coordinate routine waste pickups Conduct product assessments, including: Physical: color, odor, appearance, etc. Analytical: torque, specific gravity, pH, viscosity, etc. Operate and be cross\-trained on QC lab equipment (pH testing, viscosity testing, specific gravity, and related tools) Analyze product characteristics against specifications and determine disposition (pass\/fail), including review of Certificates of Analysis (COAs) Adhere to Good Laboratory Practices (GLP) and current Good Manufacturing Practices (cGMP) Escalate quality issues in a timely manner using clear and appropriate quality terminology Assist with audits and special testing requests under the guidance of the Quality Manager Support production, warehouse, and quality teams as needed Job Requirements Strong written and verbal communication skills in English; Spanish proficiency is a plus High commitment to safety, especially when working with laboratory equipment Basic math skills with the ability to interpret analytical data Ability to climb ladders, remain on feet for up to a 10\-hour shift, and lift up to 50 lbs Ability to collect samples from containers up to 72” tall Strong ability to prioritize and adapt to changing production needs Exceptional attention to detail ASQ Certified Quality Inspector (CQI) preferred 30 \/ 60 \/ 90 Day Expectations First 30 Days Fully understand inbound inspection processes and clearly explain responsibilities, procedures, and value to the organization Build relationships with key and cross\-functional teams and understand role alignment Manage inbound receipt inspection tracking and provide weekly summaries of rejected materials By 60 Days Assist with retains and standards management and independently support investigations Support the Quality Lead with non\-conformance investigations (NCRs), including timely escalation and closure By 90 Days Conduct trend analysis on rejected inbound materials Provide high\-level summaries outlining impacted items, common issues, quantities, and vendor data Pay Rate: $19\/hour Schedule: 6:00 AM - 2:30 PM (overtime and weekend availability required as needed) "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"653983288","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"ZR_2506_JOB"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"Salary","uitype":1,"value":"19"},{"field Label":"Salary Type","uitype":2,"value":"Hourly"},{"field Label":"City","uitype":1,"value":"Fontana"},{"field Label":"State\/Province","uitype":1,"value":"California"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"92335"}],"header Name":"QC Inspector","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:3525447","is JobBoard":"false","user Id":"4**********0184003","attach Arr":[],"awli ApiKey":"861ql0p5wym4v2","custom Template":"3","awli HashKey":"66ba2a8eeb5a681ba7da00d31a032d7817c4e5dab8f6c880d8eafd16e2274f43b413d096a**********10b0669a46e69610344ec56ef093aa867f744e099feff","is CandidateLoginEnabled":false,"job Id":"4**********8088056","FontSize":"15","google IndexUrl":"https:\/\/greathirehr.zohorecruit.com\/recruit\/ViewJob.na?digest=Qx8B8qu1HVi@**************************@VJP8\-&embedsource=Google","location":"Fontana","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"5a0s1eed**********48682b45b77ac5327c6"}

The Quality Control Training Analyst reviews previous day's admissions, registrations, insurance notification faxes, and identifies and corrects all demographic information, reviews required forms to ensure appropriate fields are checked, signed, timed, dated and witnessed. Records errors by registrar and provides report to manager. Responsibilities The Specialist verifies all ‘unable to sign' patients and makes an attempt to obtain required signatures and documents efforts in account, reports to manager daily. Trains all new hires and or existing staff and completes competency for each area employee was trained. Provides competency and feedback to manager upon completion. Qualifications Minimum of 5 years hospital experience in registration, and or insurance verification. High School diploma or equivalent. Ability to type with accuracy at a rate of 25-30 wpm. Ability to work well and remain calm in time of stress. Bilingual preferred. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.

Inspects facility maintenance activities during and upon completion for conformance to manufacturers guidelines, regulatory requirements and company standards Essential Duties and Responsibilities Conduct QC inspections and audits on contract requirements, and other services performed. Prepares reports, develops quality plans, attends meetings as directed; performs other duties as assigned. Checks randomly selected samples, and verifies accuracy of equipment or process. Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. Schedule inspection activities. Knowledge, Experience and Skill Requirements Knowledge of OSHA standards, NFPA, Joint Commissioning and safety procedures with skills in conducting accident investigations and safety inspections. Basic knowledge of mechanical systems, critical thinking skills, and proficiency with standard testing tools. A thorough understanding of ISO 9001:2015 standards Knowledge of recognized and generally accepted good engineering practice regulations and codes. Excellent analytical and computer skills, specifically in MS Office Suite. Strong written and oral communication and presentation skills. Strong teamwork and interpersonal skills Work Experience Five (5) years of experience in quality management for facility operations & maintenance of industrial equipment at an industrial facility requiring compliance with ISO 9001. Must hold Certified Quality Technician (CQT) certification through American Society for Quality. Must have the communication skills required to interface and coordinate with others. Experience working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned. Education, Licenses and Certification Required: High School Diploma OSHA Certification Certified Quality Technician (CQT) certification through American Society for Quality. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $40,000 to $60,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. We maintain a drug-free workplace and perform pre-employment substance abuse testing.