Quality control analyst jobs in Oceanside, CA - 194 jobs

DescriptionEntry level laboratory analyst for work with GC-ECD samples. Duties include extraction/analysis of samples. Instrument maintenance, cleaning labware, preparation of reagents and standards. Following all laboratory protocol, following all standard operating procedures (SOPs) and adhering to any and all laboratory quality assurance protocols. Ideal Candidate will have experience with: Sample Analysis: Perform sample preparation, chemical analysis, and quantification of chemicals in accordance with EPA and standard methods Equipment Operation: Utilize advanced laboratory equipment such as Gas Chromatography (GC - FID, ECD, TCD), ICP, ICP-MS, CVAAS, GC-MS, UV-VIS analyses, balances, ovens, and more. Data Documentation: Maintain detailed records including laboratory notebooks, software data, standard preparations, and equipment logs. Equipment Maintenance: Conduct routine and in-depth maintenance, including troubleshooting laboratory equipment. Accreditation Support: Perform tasks required to maintain laboratory accreditation, such as running and reporting audit samples, completing MDL studies bi-annually, and updating documentation (e.g., SOPs, DOC forms). Quality Control: Perform and document standardizations, calibrations, and performance verifications daily. Safety & Compliance: Ensure proper sample custody, control, and hazardous waste disposal in compliance with safety protocols. Additional Duties: Assist with editing and reviewing SOPs, guidance documents, and other tasks as assigned. Essential Functions: Performs laboratory operations, including preparation, analysis, quantification of chemicals; prepares standards and samples for analysis, including quality control samples, and reports final results. Documents work performed; maintains laboratory notebooks, recordings, software data, etc. for raw data, standard preparations, and equipment Performs routine daily, weekly, and monthly maintenance of equipment Performs actions required to maintain accreditation; runs, reports, and passes audit samples bi-annually; completes MDL studies for each required method bi-annually, creates DOC forms for each quarter, and ensures all methods are run according to the requirements in each SOP Edits and reviews documents; reviews SOPs and guidance documents to ensure all procedures accurately reflect laboratory practices and meet NELAC and/or EPA requirements Maintains sample custody, control, and hazardous waste disposal Performs other job-related duties as assigned Required Qualifications: EDUCATION REQUIREMENT - Bachelor's degree in chemistry or science-related field Some experience in a laboratory setting Experience working with hazardous chemicals Familiarity with various sample methods STARTING PAY RATE: $20.00/hr. Knowledge, Skills & Abilities: General knowledge of chemistry and lab analysis operations and lab safety Proficiency in Microsoft Office programs, including MS Word and Excel Strong verbal and written communication skills Ability to lead a team and provide training and guidance to subordinates Professional demeanor and appearance; ability to serve as a representative of the company Ability to prioritize and multi-task Strong organizational skills and attention to detail Ability to read, count, and write to accurately complete all documentation Work Environment -While performing the duties of this job, the employee regularly works in a laboratory setting. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Sitting or standing for extended periods and the use of hands to finger is common. Hearing and vision within normal ranges is helpful for normal conversations, to receive ordinary information and to prepare or inspect documents. Duties frequently involve repetitive motions and eye/hand/foot coordination. Testing priorities and timelines may serve as a source of emotional stress. Occasional heavy lifting is expected. Exertion of up to 30 lbs. of force may occasionally be required. While performing the duties of this job, good manual dexterity for the use of laboratory equipment is needed. The employee is occasionally required to walk, lift, carry, push, pull, climb, stoop, kneel, crouch, reach, handle, grasp, and feel. Use of applicable Personal Protective Equipment is mandatory. Other Duties Please note this job description is intended to describe the general nature and level of work performed by employees assigned to this position. It is not designed to contain or be interpreted as a comprehensive list of all duties, responsibilities, and qualifications. Additional job-related duties may be assigned. Alliance reserves the right to amend and change responsibilities to meet business and organizational needs as necessary with or without notice. KEY BENEFITS INCLUDE: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub EEO Commitment We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, national origin, ethnicity, sex, pregnancy, sexual orientation, gender identity/expression, religion, disability, age, genetics, active military or veteran status, and any other characteristics protected under applicable federal or state law. #LABS Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Quality Control Scientist performs laboratory day-today operations, guides and interacts with QC and department personnel to accomplish goals and objectives as directed by supervisor. Other duties include performing raw material testing, final product testing, QC documentation and related GMP activities. What you will do * Maintain and perform daily operations in coordination with the QC Director/Supervisor to include testing of raw material/peptide samples and prioritizing projects * Write and work with other QC Staff and other Department in the creation and approval of control documents such as specifications, SOPs, STMs, etc. * Maintain and perform regular verification of the QC equipment for GMP compliance regularly in coordination with QC Director / Supervisor * Implement and maintain GMP procedures such as following SOP's, Standard Testing Procedures (STP's), written procedure and maintaining proper documentation as necessary for Quality Control * Test, review, and release raw material used in the manufacturing facility for GMP. Performing analytical analysis and reviewing data for completeness and accuracy * Receive, test and release final product peptide manufactured at Bachem * Test and release in-process control samples used in the manufacturing facility for GMP. Performing analytical analysis and reviewing data for completeness and accuracy * Maintain a cGMP quality level of work for the QC operations to include training, documentation and procedural work * Write/revise specifications as necessary, performing analytical analysis and reviewing data for completeness and accuracy * Write standard operating procedures, standard test procedures and other related GMP documentation * Implement and maintain GMP procedures such as following written procedure and maintaining proper documentation as necessary for Quality Control * Perform QC analysis to include: HPLC, UPLC, Water, Mass Spec, UV, GC, melting point, Optical Rotation, TLC and misc. wet chemistry lab work and other related analytical equipment used for control quality of the GMP facility. This work may include calibration and validation of these methods * Control raw material used in the manufacturing facility for GMP to include receiving, quarantine, testing and QC release * Investigate any deviation or out of specification as necessary related to QC work performed as instructed by supervisor * Execute validations as necessary to include QC Analytical methods performed, other validations to support the quality of the manufacturing facility * Follow safety guidelines for handling, disposal and use for a peptide manufacturing company using toxic and/or large volumes of chemicals * Support validation, and stability as necessary to include but not limited to analytical work, documentation and quality GMP procedure Qualifications * Bachelor's degree in chemistry or related field * Master's degree in chemistry or related field (preferred) * Minimum of 1 year experience in GMP pharma/biotech facility * Experience with Equipment Maintenance Programs * Experience with the use of analytical techniques/ instruments, such as, Gas Chromatography (GC), High Performance Liquid Chromatography (HPLC), Karl Fischer (KF), etc. * Excellent written and oral communication skills * Basic computer knowledge, including Microsoft Word, Excel and PowerPoint * Ability to effectively organize, multitask, and work in a fast-paced, deadline driven work environment * Ability to communicate in a proactive and solution-focused manner, including keeping management aware of potential issues * Detail oriented with the ability to troubleshoot and resolve problems * Ability to work independently and manage one's time * Communicate effectively and ability to function well in a team environment * Ability to review Certificate of Analysis for Reagents for the creation of specification documents * Organization skills to support the department in the creation and approval of controlled documents in a timely manner * Flexibility of working hours based on business needs, may include some nights and occasional weekends Base Hourly Range: * Scientist I: $28.90 - $39.73 * Scientist II: $32.41 - $44.56 * Scientist III: $37.65 - $51.78 * Sr. Scientist: $44.85 - $61.67 Placement of new hires in these wage ranges is based on several factors including education, skill sets, experience, and training. Total Rewards We offer all Team Members a total rewards package including competitive pay, annual performance bonus, a generous benefit package with comprehensive Medical/Dental/Vision coverage, 401(k) plan with employer contribution, and paid vacation, personal and sick days. Corporate Social Responsibility Bachem takes responsibility for future generations by a careful handling of resources and avoiding environmental risks. We continually improve our ecological performance and develop and implement new approaches for enhancing employees' environmental awareness. EcoVadis has awarded Bachem Gold Medal status in their assessment of Bachem. Bachem Americas is an Equal Opportunity Employer As an equal opportunity employer, we celebrate the diversity of our team and are committed to building an inclusive workplace where individuals are hired and advanced based on merit, skills, and qualifications. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or other legally protected status. Please note: unsolicited resumes from recruitment agencies will not be considered. Share this job posting by email

Aspen is looking for a detail-oriented Quality Control (QC) Scientist II to join its team. This predominantly lab-based role requires someone who is eager to contribute to analytical method development, optimization, qualification and validation for QC testing of cell therapy products. The ideal candidate has extensive hands-on laboratory experience in flow cytometry, real-time PCR, cell culture and molecular biology. Experience in working with stem cells is preferred. This is an on-site role in Torrey Pines, CA that requires flexibility and availability for weekend and holiday work as needed. Relocation is not available. DUTIES AND RESPONSIBILITIES: Serve as a key contributor for analytical method design, development/optimization and troubleshooting, may lead training of junior group members. Serve as a key contributor for qualification and validation of analytical methods and bioinformatics assay transfer. Conduct QC tests in compliance with quality standards and Current Good Manufacturing Practice (cGMP) regulations. Author and revise development report, standard Operating Procedure (SOPs) and technical documentation. Lead investigations of deviation or out-of-specification results in QC laboratory. Apply cGMP requirements applicable to QC laboratory. Provide scientific/technical training, advice, and coaching to junior team members. EDUCATION AND EXPERIENCE: M.S. with a minimum of 4 years of relevant experience, or Ph.D. with minimum of 2 years of relevant experience in Biology, Cell Biology, Microbiology, Molecular Biology or Biochemistry, or related field; or equivalent relevant education and experience. Extensive hands-on laboratory experience in flow cytometry, real-time PCR, cell culture and molecular biology are . Experience with stem cells, assay automation, bioinformatics analysis, and GMP operations is preferred. Experience working with real-time PCR and flow cytometry assay automation is preferred. Experience working with bioinformatics analysis is preferred. Experience working with analytical method development in GMP setting is preferred. Experience working with electronic GMP operation system is preferred. JOB SPECIFICATIONS: Analytical Skills: Advanced quantitative skills, including statistical analysis and critical evaluation of experimental data; ability to interpret results, draw conclusions, and make recommendations. Cell Culture Techniques: Excellent proficiency in aseptic cell culture techniques. Professional Scientific Expertise: Strong knowledge of scientific concepts and analytical method development in GMP. Technical Writing: Skilled in developing and finalizing SOPs, protocols, and reports that meet regulatory agency standards for clarity and compliance. Organization and Project Management: Highly organized with project coordination abilities and developing skills to lead projects. Communication Skills: Strong verbal and written communication skills to effectively convey scientific ideas, results, and strategic recommendations across departments. Collaboration & Project Management: Ability to coordinate workflows across teams, facilitate study planning and execution, and contribute to cross-functional initiatives; developing skills in project leadership and technical training for colleagues. Detail Oriented: Excellent organizing and documentation skills with a meticulous eye for detail. Problem-Solving Skills: Able to effectively address moderately complex issues through thorough analysis and use judgment in selecting the right course of action. Adaptable: Effective in a fast-paced, startup company environment, and able to adjust workload based on changing priorities. Computer Software: Experience with statistical analysis software, electronic GMP operation system. Effective in Microsoft office suite Gowning Certification: Ability to independently gown for cleanrooms. Flexible Schedule: Must be willing to work flexible hours including some weekends. EEO and Employment Eligibility: Aspen Neuroscience is committed to providing equal employment opportunities to all employees and job applicants and prohibits discrimination and harassment of any type. We are committed to creating an inclusive environment for all employees. Aspen is not able to provide visa sponsorship for this role. Applicants must have valid work authorization that does not require employer sponsorship now or in the future. Total Rewards and Culture: Aspen Neuroscience, Inc., located in scenic Torrey Pines, is noted for its collaborative and learning focused culture where each person is valued for contributing their strengths and energy to building a world-class line of products for patients in need. The company offers a competitive total compensation package, time-off in addition to Company observed holidays, Medical/Dental insurance benefits, onsite gym, and other wellness perks. The anticipated salary range for candidates who will work in San Diego $121,500 to $148,500 annually. The final salary offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and length of experience within the industry, education, etc. Aspen Neuroscience is multi-state employer, and this salary range may not reflect positions that work in other states.

Scientist, Protein Production and Characterization AlivaMab Biologics is a rapidly growing leader in the discovery of human antibody therapeutics, trusted by top-tier pharmaceutical and biotechnology companies to deliver panels of drug-quality human antibodies. We deliver on our partners' design goals, from simple to extraordinarily challenging, through collaborative access to our scientists' creativity and experience combined with proven technologies, including the AlivaMab Mouse suite of transgenic mice. Our organization is dedicated to creating a healthier world through partnerships that bring better medicines to patients faster, and we recognize our success starts with hiring people who share our passion for science. We are seeking a highly motivated and skilled Scientist to join our Protein Sciences team and contribute to both day-to-day operations and the advancement of Protein Science workflows. This position will focus on the design, optimization, and execution of transient transfection processes at various scales for antibody and protein production in mammalian expression systems. The successful candidate will leverage expertise in biophysical characterization and biochemical modification to evaluate key protein attributes. This position will report to the Associate Director of Protein Sciences and work closely with scientists in the Antibody Discovery, Antibody Engineering, Protein Sciences, and Project Management teams. The ideal candidate will drive innovation through process refinement, high-throughput automation, and growing proficiency of chemical conjugation techniques. This role offers the opportunity to work in a fast-paced, collaborative research environment, where creative solutions and a strong scientific approach are key to success. Responsibilities Responsibilities: * Independently design, plan, and execute transient transfection workflows for antibody and protein production across various mammalian expression systems * Develop, design, and optimize protein purification methods to enhance throughput, quality, and efficiency, as required * Lead developability assessment studies by designing and conducting analytical experiments to evaluate protein stability, purity, and key biophysical characteristics * Support production of complex construct design strategies (e.g VLPs, nanodiscs etc.), to enable immunization antibody discovery campaigns against challenging targets * Drive implementation of automated high throughput processes to support protein production workflows using Bravo, and other robotic systems * Maintain meticulous experimental records using electronic notebook (Benchling), and communicate results clearly through written reports and presentations to support project progression and scientific decision-making * Contribute innovative ideas and collaborate effectively across teams to foster research excellence and ensure project success in a fast-paced environment Qualifications Qualifications: * Ph.D. in Biochemistry, Chemistry, Molecular Biology, Protein Engineering, or a related field with a minimum of 2 years of industry experience or MS with minimum of 6 years of direct industry experience is required * Proven hands-on experience with multiple mammalian expression platforms is required * Proficiency with AKTA instrumentation, and a broad range of purification techniques, including affinity chromatography, ion exchange, HIC, and SEC, as well as standard protein QC methodologies is required * Experience with therapeutic antibody developability assessment is highly desirable * Strong analytical, troubleshooting, and communication skills with exceptional attention to detail * Motivated self-starter with excellent organization, teamwork, and a passion for scientific innovation About AlivaMab Biologics AlivaMab Biologics sets its partners' antibody discovery programs on the fastest and most de-risked path through discovery and development. Trusted by top-tier pharmaceutical and biotechnology companies, AMB delivers drug-quality, fully human antibodies on exceptional timelines. AMB achieves its partners' design goals, from simple to extraordinarily challenging, through the generation and function-first screening of large, molecularly diverse panels of antibodies. AMB focuses on rapid and efficient delivery of antibodies, characterized for function, kinetics and developability, and engineering for alternative formats, including multi-specifics and CARs. The AMB team's experience and passion for antibody drug discovery and development combined with the use of trusted, proven technologies, including Ablexis' AlivaMab Mouse platforms, ensure the highest probability of success. The salary range for this position considers various factors, including skills, experience, training, certifications, and organizational needs. Note that this range does not reflect any geographic adjustments based on the location where the role will be based. At AlivaMab Biologics, it is uncommon for a new hire to start at or near the top of the salary range, as compensation is tailored to each individual's skills and breadth and depth of experience. The current estimated range is $98,500 - $140,000, plus a bonus target, benefits, and equity. AlivaMab Biologics provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to religion, race, creed, color, sex, sexual orientation, gender identification, alienage or citizenship status, national origin, age, marital status, pregnancy, disability, veteran or military status, predisposing genetic characteristics or any other characteristic protected by applicable federal, state or local law. #LI-DNI

Scientist, Protein Production and Characterization AlivaMab Biologics is a rapidly growing leader in the discovery of human antibody therapeutics, trusted by top-tier pharmaceutical and biotechnology companies to deliver panels of drug-quality human antibodies. We deliver on our partners' design goals, from simple to extraordinarily challenging, through collaborative access to our scientists' creativity and experience combined with proven technologies, including the AlivaMab Mouse suite of transgenic mice. Our organization is dedicated to creating a healthier world through partnerships that bring better medicines to patients faster, and we recognize our success starts with hiring people who share our passion for science. We are seeking a highly motivated and skilled Scientist to join our Protein Sciences team and contribute to both day-to-day operations and the advancement of Protein Science workflows. This position will focus on the design, optimization, and execution of transient transfection processes at various scales for antibody and protein production in mammalian expression systems. The successful candidate will leverage expertise in biophysical characterization and biochemical modification to evaluate key protein attributes. This position will report to the Associate Director of Protein Sciences and work closely with scientists in the Antibody Discovery, Antibody Engineering, Protein Sciences, and Project Management teams. The ideal candidate will drive innovation through process refinement, high-throughput automation, and growing proficiency of chemical conjugation techniques. This role offers the opportunity to work in a fast-paced, collaborative research environment, where creative solutions and a strong scientific approach are key to success. Responsibilities Responsibilities: Independently design, plan, and execute transient transfection workflows for antibody and protein production across various mammalian expression systems Develop, design, and optimize protein purification methods to enhance throughput, quality, and efficiency, as required Lead developability assessment studies by designing and conducting analytical experiments to evaluate protein stability, purity, and key biophysical characteristics Support production of complex construct design strategies (e.g VLPs, nanodiscs etc.), to enable immunization antibody discovery campaigns against challenging targets Drive implementation of automated high throughput processes to support protein production workflows using Bravo, and other robotic systems Maintain meticulous experimental records using electronic notebook (Benchling), and communicate results clearly through written reports and presentations to support project progression and scientific decision-making Contribute innovative ideas and collaborate effectively across teams to foster research excellence and ensure project success in a fast-paced environment Qualifications Qualifications: Ph.D. in Biochemistry, Chemistry, Molecular Biology, Protein Engineering, or a related field with a minimum of 2 years of industry experience or MS with minimum of 6 years of direct industry experience is required Proven hands-on experience with multiple mammalian expression platforms is required Proficiency with AKTA instrumentation, and a broad range of purification techniques, including affinity chromatography, ion exchange, HIC, and SEC, as well as standard protein QC methodologies is required Experience with therapeutic antibody developability assessment is highly desirable Strong analytical, troubleshooting, and communication skills with exceptional attention to detail Motivated self-starter with excellent organization, teamwork, and a passion for scientific innovation About AlivaMab Biologics AlivaMab Biologics sets its partners' antibody discovery programs on the fastest and most de-risked path through discovery and development. Trusted by top-tier pharmaceutical and biotechnology companies, AMB delivers drug-quality, fully human antibodies on exceptional timelines. AMB achieves its partners' design goals, from simple to extraordinarily challenging, through the generation and function-first screening of large, molecularly diverse panels of antibodies. AMB focuses on rapid and efficient delivery of antibodies, characterized for function, kinetics and developability, and engineering for alternative formats, including multi-specifics and CARs. The AMB team's experience and passion for antibody drug discovery and development combined with the use of trusted, proven technologies, including Ablexis' AlivaMab Mouse platforms, ensure the highest probability of success. The salary range for this position considers various factors, including skills, experience, training, certifications, and organizational needs. Note that this range does not reflect any geographic adjustments based on the location where the role will be based. At AlivaMab Biologics, it is uncommon for a new hire to start at or near the top of the salary range, as compensation is tailored to each individual's skills and breadth and depth of experience. The current estimated range is $98,500 - $140,000, plus a bonus target, benefits, and equity. AlivaMab Biologics provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to religion, race, creed, color, sex, sexual orientation, gender identification, alienage or citizenship status, national origin, age, marital status, pregnancy, disability, veteran or military status, predisposing genetic characteristics or any other characteristic protected by applicable federal, state or local law. #LI-DNI

: Support the daily operations of the Quality Control Department by performing, often complex, elemental analysis of raw materials, drug substance, drug product and components in accordance with cGMP requirements, company policies and procedures as directed by laboratory management. Responsibilities: • Perform, often complex, elemental analysis of raw materials, drug substance, drug product, and components according to established specifications and procedures using elemental analysis techniques (ICP-MS, ICP-OES, AA) in accordance to USP, Pharm. Eur. and other compendial methods per Customer, Company, and cGMP requirements. • Assume ownership of assigned quality documentation, such as investigations, change controls, and CAPAs, ensuring that documentation is initiated and closed on time, required actions are thorough and meet procedural requirements as well as customer needs. • Compose test methodologies, study protocols, and Standard Operating Procedures in order to execute testing in compliance with necessary policies and procedures. Record/review data in controlled notebooks, data sheets, and electronic systems (i.e. LIMS, etc.) in accordance with cGMP requirements. • Work on problems complex in nature where analysis of situations or data requires in-depth review and evaluation of various factors, considerable judgment is required in resolving problems and making routine recommendations. Exercise judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criteria for obtaining results. • Notify Supervisor of any discrepancy in laboratory testing or general laboratory operations. In case of any observed discrepancies, initiate and follow through with the required quality exception documentation as needed. • Recommend equipment, facility, and process improvements to your supervisor. • Maintain clear, accurate and traceable documentation records to ensure compliance with Good Documentation Practices (GDP). • Maintain laboratory and workspace cleanliness by adhering to the 5S method of organization. • Abide by safe work practices and adhere to general safety rules, performing all duties in a safe manner and never placing yourself or those around you in an unsafe condition. Report all unsafe conditions to your supervisor. • This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary. Qualifications • A minimum of 12 years, 14+ years preferred, industry related work experience. • Bachelor's degree or equivalent in scientific discipline required. Advanced degree is strongly preferred.• Advanced knowledge of elemental analysis in raw materials, drug substance, drug product and components. • Advanced knowledge of analytical chemistry principles and techniques using Atomic Absorption (Flame and Graphite Furnace), Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) • Advanced knowledge of USP, Pharm. Eur. and other compendial methods and procedures with emphasis on USP , , Pharm. Eur. , , , JP , , • Proficient in method development and phase appropriate validation in compliance with ICH guidelines, FDA regulations, compendia and cGMP requirements • Strong technical writing skills for protocols, test methods, reports, laboratory investigation and deviations according to applicable methodologies/regulations. The annualized salary range for this position is $91,800 - $143,400.

Scientist, Protein Production and Characterization AlivaMab Biologics is a rapidly growing leader in the discovery of human antibody therapeutics, trusted by top-tier pharmaceutical and biotechnology companies to deliver panels of drug-quality human antibodies. We deliver on our partners' design goals, from simple to extraordinarily challenging, through collaborative access to our scientists' creativity and experience combined with proven technologies, including the AlivaMab Mouse suite of transgenic mice. Our organization is dedicated to creating a healthier world through partnerships that bring better medicines to patients faster, and we recognize our success starts with hiring people who share our passion for science. We are seeking a highly motivated and skilled Scientist to join our Protein Sciences team and contribute to both day-to-day operations and the advancement of Protein Science workflows. This position will focus on the design, optimization, and execution of transient transfection processes at various scales for antibody and protein production in mammalian expression systems. The successful candidate will leverage expertise in biophysical characterization and biochemical modification to evaluate key protein attributes. This position will report to the Associate Director of Protein Sciences and work closely with scientists in the Antibody Discovery, Antibody Engineering, Protein Sciences, and Project Management teams. The ideal candidate will drive innovation through process refinement, high-throughput automation, and growing proficiency of chemical conjugation techniques. This role offers the opportunity to work in a fast-paced, collaborative research environment, where creative solutions and a strong scientific approach are key to success. Responsibilities Responsibilities: Independently design, plan, and execute transient transfection workflows for antibody and protein production across various mammalian expression systems Develop, design, and optimize protein purification methods to enhance throughput, quality, and efficiency, as required Lead developability assessment studies by designing and conducting analytical experiments to evaluate protein stability, purity, and key biophysical characteristics Support production of complex construct design strategies (e.g VLPs, nanodiscs etc.), to enable immunization antibody discovery campaigns against challenging targets Drive implementation of automated high throughput processes to support protein production workflows using Bravo, and other robotic systems Maintain meticulous experimental records using electronic notebook (Benchling), and communicate results clearly through written reports and presentations to support project progression and scientific decision-making Contribute innovative ideas and collaborate effectively across teams to foster research excellence and ensure project success in a fast-paced environment Qualifications Qualifications: Ph.D. in Biochemistry, Chemistry, Molecular Biology, Protein Engineering, or a related field with a minimum of 2 years of industry experience or MS with minimum of 6 years of direct industry experience is required Proven hands-on experience with multiple mammalian expression platforms is required Proficiency with AKTA instrumentation, and a broad range of purification techniques, including affinity chromatography, ion exchange, HIC, and SEC, as well as standard protein QC methodologies is required Experience with therapeutic antibody developability assessment is highly desirable Strong analytical, troubleshooting, and communication skills with exceptional attention to detail Motivated self-starter with excellent organization, teamwork, and a passion for scientific innovation About AlivaMab Biologics AlivaMab Biologics sets its partners' antibody discovery programs on the fastest and most de-risked path through discovery and development. Trusted by top-tier pharmaceutical and biotechnology companies, AMB delivers drug-quality, fully human antibodies on exceptional timelines. AMB achieves its partners' design goals, from simple to extraordinarily challenging, through the generation and function-first screening of large, molecularly diverse panels of antibodies. AMB focuses on rapid and efficient delivery of antibodies, characterized for function, kinetics and developability, and engineering for alternative formats, including multi-specifics and CARs. The AMB team's experience and passion for antibody drug discovery and development combined with the use of trusted, proven technologies, including Ablexis' AlivaMab Mouse platforms, ensure the highest probability of success. The salary range for this position considers various factors, including skills, experience, training, certifications, and organizational needs. Note that this range does not reflect any geographic adjustments based on the location where the role will be based. At AlivaMab Biologics, it is uncommon for a new hire to start at or near the top of the salary range, as compensation is tailored to each individual's skills and breadth and depth of experience. The current estimated range is $98,500 - $140,000, plus a bonus target, benefits, and equity. AlivaMab Biologics provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to religion, race, creed, color, sex, sexual orientation, gender identification, alienage or citizenship status, national origin, age, marital status, pregnancy, disability, veteran or military status, predisposing genetic characteristics or any other characteristic protected by applicable federal, state or local law. #LI-DNI

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview Under the direction of the Task Order Manager, the Quality Control Inspector is responsible for conducting inspections to ensure compliance with contract requirements and Quality Control and Safety Plans. Pay Rate: $26.74/hourly Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Review all site work to verify compliance in accordance with applicable plans and procedures. * Inspect and diagnose problems to determine corrective actions/repairs. * Inspect work in progress and finished work for discrepancies in accordance with the QC and applicable Safety Plans, and contract requirements.Complete necessary inspection reports and documentation required to support findings. * Assist in preparing Safety incident and hazard reports as required. * Maintains accurate administrative records. * Review all site work to verify compliance in accordance with applicable plans and procedures. * Respond to emergency site maintenance as required. * Ensures proper housekeeping practices are strictly observed. * Maintain open communications with personnel. * Performs other duties as assigned by the supervisor. * Other duties as assigned. Accountable For: * Tools and equipment within his or her possession. * Using PPE when required. * Timely completion and accuracy of all work. * Working closely and harmoniously with fellow workers. * Adherence to all Safety rules and regulations. Job Requirements Mandatory: * Working knowledge of Microsoft Programs, including but not limited to: Outlook, Word, PowerPoint, and Excel or equivalent software program. * Understanding of Government contracts, correspondence, reports, and records. * Knowledge of generally accepted standards of workmanship in custodial services. * Excellent communication skills, both oral and written. * Excellent organizational skills. * Mature judgment and ability to work with little or no supervision. * Ability to communicate ideas effectively with personnel at all levels. * United States Citizen. * High School Diploma or Equivalent. * Ability to pass pre-employment background check and drug screen. * Must be able to read, write, and speak English fluently. * Valid driver's license with excellent driving record (Must provide current driving record). * Ability to obtain access to U.S. Government Installations through the Defense Biometric Identification System (DBIDS). Preferred: * 2 yrs custodial experience. * Two-year degree in Safety, Industrial Hygiene, or a related field or broad experience in the same or similar areas. * Bilingual - Spanish Working Conditions: * Work is performed indoors and outdoors. Outdoor work is subject to temperature extremes and inclement weather conditions. * Work hours are subject to change, with overtime, weekend and/or holiday work as needed. * Subject to hazards that may cause personal bodily harm; diseases, cuts, bruises, burns, common cold, influenza, dust odors and elevated noise levels. * Tasks may be performed on uneven, inclined, hard and soft carpeted floors, cement structures and surfaces. * While performing duties of this job, the employee is occasionally required to stand and/or walk for long periods of time, sit, use of hands and fingers, handle, or feel objects, tools or controls, reach with hands and arms, climb stairs, climb ladders, balance, stoop, kneel, crouch or crawl, talk, hear, or smell. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by the job include close vision. May be required to operate regular and specialized vehicles. Physical Requirements: * Must be able to lift to 50 lbs. * Must be able to climb stairs and ladders as required. * Must be able to load/unload materials, tools, and equipment. * Involves walking, bending, stooping, twisting, and reaching. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Job DescriptionRare opportunity to learn and grow with our company! Liberty EnviroLab is currently seeking Full Time Experienced Laboratory Analysts specializing in wildfire, structure fire, asbestos, and mold analysis. Liberty EnviroLab is located in San Marcos in the northern San Diego County. Liberty offers a variety of analytical testing services to support environmental investigations focused on wildfire, structure fire, asbestos, mold (microbiology). Our management team has over 71 years of combined experience in particulate analysis and trace evidence examination. We believe in empowering our customers with accurate and defensible analytical results. Some Responsibilities Include: Safely perform analyses on samples according to Libertys Standard Operating Procedures (SOPs) using advanced instruments. Follow all laboratory QA/QC requirements Record data using computer software and programs. Maintain equipment according to manufacturer guidelines and company procedures. Perform other assigned duties, as requested by supervisor. Requirements: Associates or Bachelors Degree in a life science (biology, chemistry, environmental science, etc.) preferred. 1-2 years of Polarized light microscopy (PLM) experience required. 1 year of Phase contrast microscopy (PCM) experience required. Self-motivated, independent, and team oriented. Must be able to work in a fast-paced setting, multi-task, and prioritize assignments. Good communication, computer, typing, and organizational skills. Liberty EnviroLab offers full time benefits: medical, 401k, sick pay, paid time off, and holiday pay. Pay range for this position is $22.00-$29.00 per hour. The work schedule is flexible. Visit our website for more information about our company. ************************ Please submit your resume, or call us at ************ for assistance!

For five decades, HPI Architecture has shaped environments that do more than function, they inspire, support, and enrich lives across generations. Our work bridges people and place, creating meaningful spaces rooted in purpose and designed with intention. Our brand promise reflects who we are: With intention, we approach each project with curiosity, creativity, collaboration, and technical finesse. Fully engaging in the process, we design places that reflect the vision and values of our clients and the people they serve. At HPI, you'll grow through continuing education, mentorship, and professional development, with opportunities to expand your skills and elevate your craft. We also offer a flexible schedule and hybrid work options to support balance, collaboration, creativity, and well‑being. As we embark on the next 50 years, we're seeking an Architectural Specifier / Quality Controller to help uphold the technical excellence, coordination, and material integrity that define our legacy of thoughtful, high-performing design. How You Will Make an Impact: Produce coordinated Project Manuals using CSI formats, developing specifications from Schematic Design through Construction Administration. Conduct thorough product research, evaluate alternatives, maintain vendor relationships, and support teams with material and product selection. Collaborate with Technical Directors and Project Architects to develop and maintain office-wide specification standards. Review drawings, Revit models, and Keynote lists to ensure alignment with specifications, providing clear technical guidance across all project phases. Perform Quality Control reviews at key milestones-evaluating code compliance, accessibility, constructability, life safety, and coordination across disciplines. Use Revit and Bluebeam Sessions to review documentation and confirm comment resolution. Support bidding and construction administration by assisting with RFIs, submittals, and product substitutions. Participate in project and consultant coordination meetings, staying current with building codes, DSA requirements, and industry best practices. Manage multiple active projects simultaneously, maintaining accuracy, consistency, and deadlines. To Be Successful in This Role, You Must: Demonstrate expert knowledge of building systems, construction techniques, materials, and codes. Communicate technical information clearly and collaborate effectively across teams. Be highly organized, detail-oriented, and able to manage multiple deadlines. Bring strong problem-solving abilities and provide thoughtful, solutions-oriented feedback. Work confidently in a fast-paced, multi-project environment. Show initiative in improving standards, documentation practices, and material research. Leverage Revit and Bluebeam to support accurate, coordinated design review processes. To Qualify, You Must Have: A minimum of 10 years of relevant architectural experience, including at least 5 years of specification writing. Experience preparing architectural specifications using AIA MasterSpec. Strong understanding of building codes, materials, construction techniques, and sustainability requirements. Proficiency in Microsoft Office, Bluebeam Revu, and specification editing software. CSI certification preferred. LEED Accreditation and/or CASp certification a plus. Knowledge of DSA requirements preferred. Knowledge of Revit and Revit add-ins for specifications and keynotes a plus. A professional degree in Architecture is a plus. Excellent communication and collaboration skills. Pay, Perks & Benefits Flexible Schedule and Hybrid Work Opportunities Vacation and Sick time Medical, Dental, and Vision Insurance with additional Supplemental Insurance options 401(k) Ongoing professional development with access to continuing education and meaningful mentorship Licensure Assistance Salary Range: $105,000.00 To $135,000.00 Annually Our Core Values CLIENT CENTERED: We're all in-listening first, collaborating closely, anticipating needs, and actively engaging with our project partners and one another. DESIGN EXCELLENCE: We dig deep to uncover the unique needs of our clients-shaping purposeful, inspiring, and enduring spaces for solutions rooted in people. PROFESSIONAL INTEGRITY: We own our role and take pride in our work, delivering an exceptional experience every step of the way that excites. Ready to help shape the next 50 years of meaningful design? We'd love to meet you! Recruiters, please do not contact this job poster.

Join our dynamic team in San Diego, CA, a hub for innovation and biotechnology, where you can leverage your skills in a thriving environment. We are seeking a dedicated professional to ensure the highest quality standards in our laboratory operations. Job Responsibilities Train and become proficient in all required techniques, operation of relevant equipment, and software packages associated with testing, data analysis, and data reporting. Work with human blood, human or mammalian cell culture, and/or animals and animal tissues as needed. Complete all assigned QC tests accurately and timely under supervision, following standard protocols or operating procedures. Prioritize daily workload and develop skills to work independently. Analyze data, report test results, and complete all required documentation and database entries as required by QC protocols or operating procedures. Calibrate and maintain equipment, reporting any issues to the QC Supervisor or Manager. Maintain logs and required documentation as necessary. Prepare lab supplies, reagents, and assist with laboratory maintenance as needed. Promote a safe work environment and provide recommendations for maintaining safety. Participate in Environmental, Health & Safety programs and address corrective actions when hazards are identified. Notify supervisor and Safety Officer(s) of all observed hazardous conditions or unsafe work practices. Keep abreast of the basic requirements for safety compliance in your area of work and comply with those requirements. Participate in group or intra-department teams and projects as required. Engage in assigned cross-training and perform other related duties and assignments as required. Education and Experience BS/BA in a related scientific discipline or some related college coursework with a minimum of 2 years of related experience in a biotech lab environment. Experience in an industrial or research laboratory preferred. Flow Cytometry experience required. Tissue Culture experience highly preferred. Knowledge and Skills Basic computer skills: MS Excel & Word. Knowledge of general laboratory safety. Effective interpersonal, written, and oral communication skills. Demonstrated ability to follow established policies/procedures, and ability to keep neat, accurate, and complete records and logs. Effective analytical and problem-solving skills.

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Good work history. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

Works to ensure that the quality of orthotics is up to standard for shipping and measurements for orders are within the bounds of reasonability. We would like to get to know you more. Using Loom.com, please record an introduction video (maximum of two minutes) and tell us more about your passion and experiences. You will be asked to paste the link to the video on the application form. This position is remote and on -site in Riverside, CA. Responsibilities: Ensures quality of materials in orthotics Ensures that finished orthotics meet physical standards Orthotics are not too wide/narrow, too short/long, or etc... Verifies the legitimacy of orders placed Double -checks the orders placed by order entry Verifies measurements for modifications that seem highly unusual, if not impossible Requirements Previous experience in an orthotics lab Understanding of human biomechanics and anatomy High School Graduate or GRE equivalent Ability to work as a team member Capability of communicating across departments for quality control Meticulous with an eye for details

Job Title: Analytical Lab TechnicianJob Description The Analytical Lab Technician will be responsible for various chemistry lab-related tasks, including data management, testing, and lab organization. Responsibilities * Perform routine and non-routine analytical testing using techniques such as HPLC, GC, and UV-Vis. * Prepare and standardize solutions, reagents, and samples according to established procedures. * Maintain and calibrate laboratory instruments to ensure accuracy and reliability of results. * Interpret and document test results in compliance with Good Laboratory Practices (GLP) and Standard Operating Procedures (SOPs). * Assist in troubleshooting analytical issues and method development/improvement. * Ensure laboratory cleanliness, organization, and proper waste disposal. * Comply with safety regulations, quality control standards, and regulatory requirements (e.g., FDA, ISO, EPA, GMP). * Collaborate with other departments to support production, quality assurance, and R&D efforts. * Participate in investigations of out-of-specification (OOS) results and corrective actions. Essential Skills * Experience: 1-3 years of laboratory experience in an analytical, pharmaceutical, environmental, or manufacturing setting preferred. * Technical Skills: Familiarity with analytical instrumentation (HPLC, GC). * Understanding of Good Laboratory Practices (GLP) and Standard Operating Procedures (SOPs). Additional Skills & Qualifications * Ability to perform light office work. * Must be able to lift and carry up to 15 lbs. Work Environment The role is based in a laboratory environment, requiring the use of normal Personal Protective Equipment (PPE). The Lab Technician will work alongside 3-4 other chemists. The company is a growing medical device start-up, anticipating an increase in workload over the next year. The team fosters a collaborative, hardworking, and fun culture. Job Type & Location This is a Contract to Hire position based out of Irvine, CA. Pay and Benefits The pay range for this position is $25.00 - $27.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Irvine,CA. Application Deadline This position is anticipated to close on Jan 24, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Q/C Sanitation must have food production exp Job Posted by ApplicantPro

For five decades, HPI Architecture has shaped environments that do more than function, they inspire, support, and enrich lives across generations. Our work bridges people and place, creating meaningful spaces rooted in purpose and designed with intention. Our brand promise reflects who we are: With intention, we approach each project with curiosity, creativity, collaboration, and technical finesse. Fully engaging in the process, we design places that reflect the vision and values of our clients and the people they serve. At HPI, you'll grow through continuing education, mentorship, and professional development, with opportunities to expand your skills and elevate your craft. We also offer a flexible schedule and hybrid work options to support balance, collaboration, creativity, and well‑being. As we embark on the next 50 years, we're seeking an Architectural Specifier / Quality Controller to help uphold the technical excellence, coordination, and material integrity that define our legacy of thoughtful, high-performing design. How You Will Make an Impact: Produce coordinated Project Manuals using CSI formats, developing specifications from Schematic Design through Construction Administration. Conduct thorough product research, evaluate alternatives, maintain vendor relationships, and support teams with material and product selection. Collaborate with Technical Directors and Project Architects to develop and maintain office-wide specification standards. Review drawings, Revit models, and Keynote lists to ensure alignment with specifications, providing clear technical guidance across all project phases. Perform Quality Control reviews at key milestones-evaluating code compliance, accessibility, constructability, life safety, and coordination across disciplines. Use Revit and Bluebeam Sessions to review documentation and confirm comment resolution. Support bidding and construction administration by assisting with RFIs, submittals, and product substitutions. Participate in project and consultant coordination meetings, staying current with building codes, DSA requirements, and industry best practices. Manage multiple active projects simultaneously, maintaining accuracy, consistency, and deadlines. To Be Successful in This Role, You Must: Demonstrate expert knowledge of building systems, construction techniques, materials, and codes. Communicate technical information clearly and collaborate effectively across teams. Be highly organized, detail-oriented, and able to manage multiple deadlines. Bring strong problem-solving abilities and provide thoughtful, solutions-oriented feedback. Work confidently in a fast-paced, multi-project environment. Show initiative in improving standards, documentation practices, and material research. Leverage Revit and Bluebeam to support accurate, coordinated design review processes. To Qualify, You Must Have: A minimum of 10 years of relevant architectural experience, including at least 5 years of specification writing. Experience preparing architectural specifications using AIA MasterSpec. Strong understanding of building codes, materials, construction techniques, and sustainability requirements. Proficiency in Microsoft Office, Bluebeam Revu, and specification editing software. CSI certification preferred. LEED Accreditation and/or CASp certification a plus. Knowledge of DSA requirements preferred. Knowledge of Revit and Revit add-ins for specifications and keynotes a plus. A professional degree in Architecture is a plus. Excellent communication and collaboration skills. Pay, Perks & Benefits Flexible Schedule and Hybrid Work Opportunities Vacation and Sick time Medical, Dental, and Vision Insurance with additional Supplemental Insurance options 401(k) Ongoing professional development with access to continuing education and meaningful mentorship Licensure Assistance Salary Range: $105,000.00 To $135,000.00 Annually Our Core Values CLIENT CENTERED: We're all in-listening first, collaborating closely, anticipating needs, and actively engaging with our project partners and one another. DESIGN EXCELLENCE: We dig deep to uncover the unique needs of our clients-shaping purposeful, inspiring, and enduring spaces for solutions rooted in people. PROFESSIONAL INTEGRITY: We own our role and take pride in our work, delivering an exceptional experience every step of the way that excites. Ready to help shape the next 50 years of meaningful design? We'd love to meet you! Recruiters, please do not contact this job poster.

JLA International, a Leader in Food Safety, is now accepting applications for Laboratory Analyst - Chemistry at its facility in Santee, SC. - A BS or BA in Chemistry or related field (required) - Experience with GC and HPLC testing of food matrices (preferred) - Strong attention to detail - Proficiency with data entry and computer applications - Ability to multitask and work in a fast-paced environment - Strong written and verbal communication skills - Strong understanding of aseptic technique in the laboratory Laboratory Analyst duties include performing analysis on food, feeds, and grains; conducting quality control analysis in accordance with the laboratory quality control program; preparing reagents as needed according to formulations in methods and instructions; capturing and recording accurate and complete analytical information on approved forms, worksheets, and other appropriate documents; following record management guidelines and securing records when in possession; carrying out sample management procedures from receiving through final disposal; assisting with general housekeeping of the laboratory; and other duties as assigned. This position is full-time and eligible for standard benefits after a brief waiting period. The schedule is Monday to Friday, from 8:00am to 5:00pm. Employees are also required to work one weekend per month. Due to exposure to various food allergens in the laboratory environment, applicants with moderate to severe food allergies are discouraged from

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Responsibilities: Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. Suggest changes in departmental procedures and processes (SOPs) as needed. Performs and documents line clearance at the start of each formulation event. Maintains all required logs and associated documentation. Assures that all chemicals are stored and labeled properly. Performs process scale checks on all required equipment including scales and balances. Keeps work area, utensils, tanks, mills, and equipment clean and organized. Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. Understands and follows procedures to ensure that chemicals are handled properly. Good understanding of metric system and its conversions. Follows and actively participates in sustaining the 6S program in the area. Other duties as requested by Lead or Supervisor. Required Skills/Education: High School Diploma or equivalent. Good work history. Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. 1-2 years of hands on experience General education about chemicals and proper handling (college level science preferred). Working knowledge of metric system. Good understanding of current Good Manufacturing Practices (cGMPs). Ability to speak, read, and write English. Good oral and written communication skills. Salary and Benefits: For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). Medical, Dental, Vision Life Insurance 401k Paid Time Off *#LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

At Devon, we will offer you a career full of energy and unmatched opportunities to solve today's greatest challenges. Innovation, creative problem-solving and positive change happen when people step out of their comfort zone and think differently. Our values, workplace practices, wellness programs, benefits and compensation are aimed at helping employees manage their unique personal life and care for their families so they can focus on contributing to the fullest. The Chemical Technologist, working under limited supervision, is responsible for leading production chemical support, corrosion strategies, risk assessment, failure analysis, and integrity management support to the production operations group. The role drives project prioritization and cost monitoring, and maintains regulatory, environmental, and safety compliance. The role directs monthly chemical review with vendors and Devon staff, leads failure review analysis for corrosion induced failures, and presents review results. The role leads cost/benefit analysis of individual chemicals, supports and facilitates field equipment installs and upgrades, conducts data analysis to enable equipment reliability improvement, repairs cathodic protection equipment, ensuring a cost effective approach to asset longevity. The role supports the vendor selection and qualification process, prioritizes, organizes, and completes basic assignments on time with some direction, frequently seeking guidance from experienced peers when faced with routine problems in chemical processes. * Leads production chemical support, corrosion strategies, risk assessment, failure analysis, and integrity management support to the production operations group, ensuring optimal performance and safety of production assets. * Drives project prioritization and cost monitoring, prepares recommendations to optimize chemical treating processes, and leads implementation of SOPs and technical documents. * Maintains regulatory, environmental, and safety compliance in conjunction with and through close coordination with the Operations Foreman, Superintendents, and Environmental Health and Safety Department. * Participates in monthly chemical review with vendors and Devon staff, leads failure review analysis for corrosion induced failures, and presents results of review reports during monthly chemical reviews. * Analyzes technical data to optimize chemical program with the goal to minimize chemical cost and asset failures, evaluates effectiveness of chemical treatment, improves process related to drilling, completions, and production, and analyzes data through SAP. * Leads cost/benefit analysis of individual chemicals along with each area's chemical program, educates lease operators on chemicals, injection rates, and chemical injection/storage equipment used in their area through training sessions. * Supports and facilitates field equipment installs and upgrades, reviews surface equipment failure database, conducts data analysis to enable equipment reliability improvement, and repairs cathodic protection equipment, ensuring a cost effective approach to asset longevity. * Implements modifications to routine tasks related to production chemical support, supports vendor selection and qualification process, and actively participates in proactive safety and continuous improvement activities, demonstrating a visible commitment to EHS. * Prioritizes, organizes, and completes basic assignments on time with some direction, frequently seeking guidance from experienced peers when faced with routine problems in chemical processes. * Possesses the right and obligation to stop work in unsafe conditions, contributing to a safe and secure working environment for all personnel. Education: * High School Diploma/General Education Diploma (GED)/Higher Secondary education and/or commensurate work experience is required. Associate's Degree in Engineering, Business Administration or any other related discipline is preferred. Experience: * 0-3 years of relevant experience with an Associate's Degree in Engineering, Business Administration or any other related discipline, otherwise 9+ years of relevant production operations experience, preferably in E&P Operations specializing in areas Chemical Treatment Processes, Equipment Maintenance, Process Optimization or a related field. Industry experience is preferred. Certifications: * Certified Chemical Technician (CCT) (preferred) Competencies: * Oral & Written Communication * Results Oriented * Active Learning * Digital Literacy * Business Acumen Skills: * Root Cause Analysis (RCA) * Corrosion Mitigation * Process Improvements * Failure Analysis * SAP ERP System * Risk Analysis * Data Analysis & Reporting * Equipment Maintenance Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law. For more information on Equal Employment Opportunity, please follow these links: EEO is the Law EEO is the Law Supplement Pay Transparency Provision