Quality control analyst jobs in Perth Amboy, NJ

Looking for candidates at Chemist I, II and III levels responsible for carrying out analytical method validation/verification activities and testing for Oral Solids, Oral Liquids, Topicals and Powders. MAJOR DUTIES/RESPONSIBILITIES: Develop/Validate/Verify analytical (HPLC, GC, ICP-MS/OES, other) methods for assay and impurities determination in drug substances and drug products. Perform wet chemistry and chromatographic testing for raw materials and products under development phase Perform stability studies for drug products in development phase and generate reports Develop and validate cleaning methods and generated study protocols and reports Prepare relevant protocols, reports, and final methods Maintain proper instrument calibration status Ensure that work is carried out safely and in compliance with the organization's quality system Ensure that quality documentation is generated and updated to reflect current best practice in a timely manner. Perform peer review at Chemist III level, not required if you're applying for Chemist I/II levels. Perform other duties as assigned. MINIMUM/PREFERRED REQUIREMENTS: Education: Bachelor or Master's degree in science or Pharmaceutics. Experience: Bachelor's with 2-7 years of experience in a generic pharmaceutical analytical lab. Master's is preferred. Candidates shall be considered for different positions based on educational qualification and experience. Good understanding of cGMPs is a must for experienced candidates. PHYSICAL DEMANDS/ENVIRONMENTAL CONDITIONS: Laboratory and office environment Able to lift about 25 pounds. Able to stand and or sit for longer period of time. On-site, Full-time, Day Shift

Job Description Employment Type: Intern Division: Field Operations Department: Quality Salary Range: $23 - $28/hour The Quality Intern supports the Quality department in implementing and monitoring quality management processes across multiple projects in various phases of construction. This role offers broad exposure to construction operations while working closely with Quality Program Managers to uphold and enhance project standards. Responsibilities / Essential Functions Participate in the quality program by attending meetings, performing inspections, and verifying materials. Assist with coordination and content development for Quality pre-operational meetings. Provide technical support on project sites, including interpreting contract drawings and submittals. Develop an understanding of project schedules and critical path activities. Collaborate with Quality Program Managers on initiatives such as drain assembly analysis, finish floor build-up analysis, and water intrusion control planning. Perform other tasks as assigned by the team. Key Skills Excellent written and verbal communication skills. Strong initiative and problem-solving abilities. High attention to detail. Effective time management with the ability to handle multiple responsibilities and meet deadlines. Ability to work in a team environment with a primary focus on collaboration. Required Experience Pursuing a Bachelor's Degree in Construction Management, Engineering, or a related field (preferred). Demonstrated interest in construction management and the construction industry.

Resillion US, LLC. is a leading content QC company that works with major streaming services and entertainment platforms to bring diverse stories to a global audience. We value precision, inclusivity, and creativity in delivering the best viewing experience to subscribers all around the world. One of our specialties focused on preserving and revitalizing iconic content for audiences around the world. We are passionate about blending artistry with state-of-the-art technology to restore classic films, television shows, and media to their original brilliance while enhancing them for modern viewing standards. Our high-profile projects celebrate the history of entertainment and push the boundaries of digital restoration. Job Description Set up playback devices, QC bays, and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration, and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) The ideal candidate would possess : Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid DaVinci Resolve proficiency, including building files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Salary Range $25.00-27.00 Per Hour Qualifications 3 to 5 years experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information Equal Employment Opportunity - Resillion US, LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, religious creed, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law (such as cancer), genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. Resillion US, LLC management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs and general treatment during employment. All your information will be kept confidential according to EEO guidelines. Disclaimers Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. Resillion does not accept unsolicited headhunter and agency resumes and will not pay fees to any third-party agency. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All offers of employment at Resillion US, LLC. are contingent upon clear results of a thorough background check.

Working days: Mon - Fri Working hours: 10am - 7pm We are looking to hire an experienced diamond professional to join our NYC Office. You will be responsible for quality controlling diamonds and gemstones as well as managing all incoming and outgoing shipments to and from the office. The main goal is to ensure that diamonds come in and out of the NYC office in the shortest delay, while ensuring that all diamonds are up to quality standards. About Nivoda Nivoda's growth trajectory has skyrocketed over the past 12 months, and we continue to expand across new regions at an unprecedented pace. Our DNA centers on understanding our customers' needs and offering them a seamless experience. With a growing team based in major cities worldwide, including London, New York, Hong Kong, and Mumbai, Nivoda is becoming the go-to marketplace for the global jewelry industry. We are bold, innovative, and relentless in our pursuit of excellence as we transform an industry steeped in tradition. What you'll do Quality control diamonds and gemstones Receive consolidated shipments via courier partners Mark orders as received in the Nivoda system. Repack and send orders along to the next destination while updating the Nivoda system. Hand-deliver diamonds to local customers when necessary Collect diamonds from local suppliers, perform quality check and package and ship to the next destination. Create shipments using the Nivoda platform and send labels to suppliers to ensure timely delivery. Liaise with suppliers for shipments and forward invoices to the finance department. Assist customer support with queries related to shipping, order updates and urgent delivery requests. Assist in the smooth overall operation of the office. Support in managing the administrative work related to the office. Follow up with courier partners. Process returned diamond from our customers. Assist and advise other team members and management on the continuous improvement of all the processes of the local office. What you'll need Must have 2+ years of hands on diamond/gemstone experience Must have experience in stock control of high value products. Logistics experience or familiarity with different courier services and tracking systems is useful Attention to detail is a must. Honesty, professionalism, and integrity are essential. Alignment with the Nivoda company values and culture. What you'll get Opportunity to join a fast-growing company at an early stage Unlimited PTO Medical, dental and vision cover

Working days: Mon - Fri Working hours: 10am - 7pm We are looking to hire an experienced diamond professional to join our NYC Office. You will be responsible for quality controlling diamonds and gemstones as well as managing all incoming and outgoing shipments to and from the office. The main goal is to ensure that diamonds come in and out of the NYC office in the shortest delay, while ensuring that all diamonds are up to quality standards. About Nivoda Nivoda's growth trajectory has skyrocketed over the past 12 months, and we continue to expand across new regions at an unprecedented pace. Our DNA centers on understanding our customers' needs and offering them a seamless experience. With a growing team based in major cities worldwide, including London, New York, Hong Kong, and Mumbai, Nivoda is becoming the go-to marketplace for the global jewelry industry. We are bold, innovative, and relentless in our pursuit of excellence as we transform an industry steeped in tradition. What you'll do * Quality control diamonds and gemstones * Receive consolidated shipments via courier partners * Mark orders as received in the Nivoda system. * Repack and send orders along to the next destination while updating the Nivoda system. * Hand-deliver diamonds to local customers when necessary * Collect diamonds from local suppliers, perform quality check and package and ship to the next destination. * Create shipments using the Nivoda platform and send labels to suppliers to ensure timely delivery. * Liaise with suppliers for shipments and forward invoices to the finance department. * Assist customer support with queries related to shipping, order updates and urgent delivery requests. * Assist in the smooth overall operation of the office. * Support in managing the administrative work related to the office. * Follow up with courier partners. * Process returned diamond from our customers. * Assist and advise other team members and management on the continuous improvement of all the processes of the local office. What you'll need * Must have 2+ years of hands on diamond/gemstone experience * Must have experience in stock control of high value products. * Logistics experience or familiarity with different courier services and tracking systems is useful * Attention to detail is a must. * Honesty, professionalism, and integrity are essential. * Alignment with the Nivoda company values and culture. What you'll get * Opportunity to join a fast-growing company at an early stage * Unlimited PTO * Medical, dental and vision cover

Our client, a world leader in diagnostics and life sciences, is looking for a "Scientist, Quality Control” based out of Branchburg, NJ. Job Duration: Long Term Contract (Possibility Of Further Extension & Conversion) Pay Rate: $39.50/hr on W2 Company Benefits: Medical, Dental, Vision, Paid Sick leave, 401K Responsible for routine Quality Control testing, familiar with basic scientific principles, and able to work in a regulated environment. Responsibilities: Conducts testing/laboratory experiments utilizing established and published procedures or batch records and technical and theoretical understanding while managing schedules and workflow to accomplish assigned objectives or schedules. Assumes responsibility for the accuracy, quality, and timeliness of testing activities. Summarizes batch or experimental results, and reviews conclusions with supervisor/project leader. Communicates results of experiments. Keeps supervisor/project leader informed of work status, particularly of significant findings and results in critical problem areas. Monitor and oversee lab supply inventory, generate expense purchase requisitions, if applicable, input production data and other work-output data into appropriate networks and maintain documentation in accordance with established procedures. Duties may include handling of hazardous materials. Depending upon the area of assignment or primary focus, may perform various manufacturing and testing duties in addition to maintaining departmental stock rooms, log books, and preparing buffers as needed/required. Qualification & Skills: Bachelor's degree in Biological/related sciences or equivalent combination of education and work experience. About 2 years of relevant industry experience in testing and/or manufacturing in a GLP and GMP environment. Experience handling deviations/CAPA preferred. Basic proficiency with MS Word and Excel If interested, please send us your updated resume at hr@dawarconsulting.com/***************************

The Quality Control Chemist-II is responsible for performing a variety of complex analytical testing, ensuring the quality of dietary supplements and OTC products through testing, documentation, and compliance with regulatory standards. This position also involves reviewing and maintaining SOPs, Testing Procedures, calibrations, and other controlled documents to support quality assurance activities. Additionally, the Chemist-II will assist with troubleshooting and minor repairs of laboratory equipment and support stability testing and documentation. This mid-level position will require more independent work, the ability to mentor QC chemist-I and Lab Tech personnel, and involvement in process improvements and corrective actions. ESSENTIAL FUNCTIONS ( Essential functions, as defined under the Americans with Disabilities Act, may include the following tasks, knowledge, skills and other characteristics. This list of tasks is illustrative ONLY and is not a comprehensive listing of all functions and tasks performed by positions in this class. It does not imply that all positions within the class perform all of the duties listed, nor does it necessarily list all possible duties that may be assigned.) Coordinates with other QC Supervisors and laboratory management so that the shared resources such as laboratory instruments, reagents, etc. are available for assigned staff to perform their job duties effectively and efficiently. Performs the pharmaceutical OTC & Dietary supplement analysis to support OTC & Dietary Supplement manufacturing which includes assay, impurity, dissolution testing, content uniformity, and physical testing. Conduct Analysis in compliance with cGMP requirements, compendia standards, and internal procedures. Maintain accurate record of analysis and perform documentation to company standards Perform laboratory analysis right first time, contemporaneous documentation, analyze and document the results. Notify manager immediately of nonconforming data or unexpected occurrences. Reviews and analyzes the stability samples and associated analytical data, prepares or assists in preparing Stability Summary Reports for Annual Product Review Reports. Reviews/Checks of analytical data by following test methods/SOPs. Performs operational qualification on analytical instruments, analytical method verification/validations, validation protocols and reports for analytical methods. Conducts laboratory investigation (OOS/OOT) under the supervision of laboratory management. Organize work schedule to complete assigned tasks efficiently and on schedule. Work under direction provided by supervisor and other duties as assigned Assist in Training and monitoring of the new hires (trainees) in learning or performing basic skills and assists in evaluating the need of any potential equipment for laboratory. Ensures the laboratory is kept in a safe working environment and in compliance with OSHA and other laboratory safety standards. Maintains knowledge of the latest guidelines of regulatory requirements of International Conference of Harmonization, USP, USFDA and OSHA. Complies with all regulatory/ in-house requirements may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, cGLP, documentation. Assists in compilation of regulatory documents. Managing the Pharmacopeia changes and up gradation and implementing the same after upgrading the change repeated documents through proper channels of change control and training to all concerned. EXPERIENCE AND QUALIFICATIONS T o perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the experience and education required : EDUCATION & EXPERIENCE o Bachelors degree in Chemistry or related science field with eight (8) to ten (10) years lab experience in a pharmaceutical chemical or related industrial experience; preferably solid dosage forms manufacturing. Method Development experience is preferred. o Masters degree or higher with six (6) to eight (8) years of progressive lab experience in a pharmaceutical chemical or related industry; preferably generic pharmaceuticals. Method Development experience is preferred. o Demonstrated skills and experience in leading a group of QC Chemists. COMPUTER SKILLS o Basic knowledge of computers using MS Office, MS Outlook and business software systems commonly used in the pharmaceutical industry required. MATHEMATICAL SKILLS o Requires a strong knowledge of algebra, calculus and statistics and how they are applied. o Math skills commensurate with scientific background are required. KNOWLEDGE, SKILLS AND ABILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and abilities required : INDUSTRY KNOWLEDGE: Knowledge and experience of applicable FDA regulatory standards and requirements for the solid oral dosage manufacturing required. Knowledge of analysis of pharmaceutical dosage forms and raw materials utilizing HPLC, GC, ICP-MS, UV, TLC, dissolution testing, spectroscopic and wet chemistry techniques is a plus. COMMUNICATION SKILLS: Advance level of written and verbal communication skills with the ability to read, technical procedures or governmental regulations. Ability to write reports, and required documentations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Must possess initiative and trouble shooting ability.

Are you detail-oriented and passionate about delivering high-quality products? At Hologic, we are seeking a Quality Control Inspector to ensure our products meet the highest standards of quality and compliance. In this role, you'll perform inspections, testing, and sampling procedures for manufacturing processes, packaging lines, and incoming materials. You'll play a key part in maintaining compliance with safety standards, supporting investigations, and driving continuous improvement initiatives. If you have a keen eye for detail, a commitment to excellence, and a desire to work in a collaborative environment, we'd love to hear from you! Knowledge: Familiarity with Good Manufacturing Practices (GMP) and Good Documentation Practices (GDP). Basic understanding of quality control tools, including measuring tapes, calipers, micrometers, scales, gauges, and microscopes. Knowledge of process auditing, documentation, and record-keeping. Ability to read and interpret basic schematics and blueprints. Awareness of FDA-regulated environments and medical device quality standards (preferred). Skills: Proficient in Microsoft Office applications, including Excel, Word, SharePoint, and OneDrive. Strong verbal and written communication skills for accurate documentation and collaboration. High attention to detail and focus on quality assurance processes. Ability to follow written procedures and maintain accurate, organized records. Capable of working both independently and collaboratively as part of a team. Analytical mindset for supporting non-conformance investigations and identifying process improvements. Behaviors: Safety-conscious, maintaining a safe work environment and promptly addressing hazards. Proactive and dependable, with a strong sense of accountability for quality and timelines. Collaborative and team-oriented, fostering positive working relationships. Adaptable and eager to contribute to continuous improvement initiatives like Kaizen events. Reliable and punctual, with a commitment to maintaining attendance and meeting deadlines. Experience: 0-1 years of experience in quality assurance or manufacturing roles, preferably in an FDA-regulated medical device environment. Hands-on experience with quality control tools and techniques is beneficial. Familiarity with clean rooms, controlled environments, and production processes is a plus. Education: High School Diploma (H.S./GED) required; an Associate Degree is a plus. Why join Hologic? We are committed to making Hologic the destination for top talent. For you to succeed, we want to enable you with the tools and knowledge required and so we provide comprehensive training when you join as well as continued development and training throughout your career. The annualized base salary range for this role is $41,200-$61,800 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, education, business needs and market demand. Agency and Third-Party Recruiter Notice Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition, Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans. #LI-NT1

As a QC Chemist, you will be responsible for performing day-to-day laboratory activities under prescribed procedures, including qualitative and quantitative analysis, solution preparation, calibration, qualification, and maintenance of laboratory instrumentation. You will also conduct environmental monitoring, assist with technical writing, and perform administrative tasks. Additionally, you will contribute to solving problems, reviewing experimental data, writing protocols/SOPs/validation reports, and training support staff as necessary. You will monitor study procedures to ensure data accuracy and report quality while maintaining a GMP/GLP laboratory. Responsibilities * Conduct analysis in compliance with cGMP requirements, compendia standards, and internal procedures. * Maintain accurate records of analysis and perform documentation to company standards. * Prepare test solutions, volumetric solutions, and samples used in analysis. * Perform assigned sampling, physical, chemical tests and assays on raw materials, active pharmaceutical ingredients, in-process, finished bulk, finished product, and stability products analysis in an FDA regulated lab environment. * Use a variety of analytical instruments such as HPLC, GC, Dissolution, Malvern particle size analyzer, IR, Auto Titrator, UV Spectrophotometer, KF, Potentiometer, etc. * Perform analysis with a practical understanding of the test procedure and instrument operation. * Conduct laboratory investigations under the supervision of the laboratory manager. * Perform maintenance and calibrations of laboratory instruments/equipment. * Comply with all regulatory and in-house requirements including safety, housekeeping, laboratory chemical waste, cGMP, cGLP, and documentation. * Maintain the required level of training needed to perform GMP tasks. * Prepare and/or review test procedures, SOPs, and protocols as assigned. Essential Skills * Proficiency in current Good Manufacturing Practices (cGMP), FDA, and other regulatory requirements. * Experience with analytical techniques such as Dissolution, FT-IR, GC, UV-VIS, KF, TLC. * Knowledge of computer applications and programs related to laboratory applications such as HPLC, FTIR, TOC. * Familiarity with sampling methods and quality control systems. * Understanding of mathematics including statistics. * Proficiency in sample preparation techniques, spectroscopic techniques, and chromatographic systems. * Basic computer knowledge including MS Word, Excel, and Outlook. * 3-5 years of routine testing using HPLC and Dissolution. * Experience with solid oral dosage and focus on raw material, finished product. * Pharma GMP experience, laboratory, wet chemistry, titration, chromatography. Additional Skills & Qualifications * Bachelor's or master's degree in Pharmaceutical, Biological, Chemical science or related field. * 5-6 years of related laboratory work experience; minimum of 5 years as a QC Chemist in a GMP environment. * Ability to work successfully in both a team/matrix environment and independently. * Ability to work in a fast-paced environment, manage priorities and maintain timelines for multiple projects. * Ability to work safely in a chemical laboratory. * Ability to perform basic calculations, read, write, communicate, and handle stress produced by time pressure, customer demands, etc. * Must be able to access all laboratory, manufacturing, and office areas. * Must be able to wear the required PPE for entering laboratory and processing areas. * Specific vision requirements include reading written documents and using a computer. * Ability to sit or stand for prolonged periods and occasionally lift up to 25 lbs. with or without assistance. Work Environment You will be working in a laboratory setting with approximately 10 people. The laboratory is equipped with modern instrumentation and follows strict safety and regulatory protocols. The work environment requires wearing personal protective equipment (PPE) and involves standing or sitting for prolonged periods. The laboratory operates under a fast-paced and dynamic atmosphere, providing an excellent opportunity for growth and development. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cranbury,NJ. Application Deadline This position is anticipated to close on Apr 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

**General Description:** Perform QC Biochemistry laboratory activities with a primary focus on capillary electrophoresis techniques to support GMP manufacturing, testing, and release of material, intermediates and finished biological products (monoclonal antibodies) under FDA/EU regulations, applicable International Regulations, and BeOne Medicines' processes and procedures. **Essential Functions of the job:** + Perform routine and non-routine testing using capillary electrophoresis techniques (e.g., CE-SDS, CZE, ic IEF) in the QC biochemistry laboratory to ensure timely and compliant generation and reporting of in-process, release, and stability test results in support of manufacturing operations. + Review, interpret, and report analytical data in accordance with GMP regulations and internal procedures. + Lead troubleshooting efforts for analytical methods and instrumentation related to CE. + Conduct laboratory investigations, including OOS, Out of Trend, deviations, and invalid assays. + Implement corrective actions and preventive actions (CAPAs). + Participate in transfer and method validation activities, including protocol preparation, protocol execution, and report preparation. + Support routine operations, including but not limited to instrument qualification and maintenance, SOP generation and revision, test record keeping, etc. + Maintain equipment in a qualified and calibrated state, coordinating with metrology or vendors as needed. + Manage inventory of reagents and supplies for the laboratory. + Participate in internal and external GMP audits, as needed. + Train other junior level analysts and new hires on CE instrumentation, GMP practices, and data analysis. + Serving as subject matter expert in one or more areas of required testing. + Undertake other duties as required. **Core** **Competencies** **, Knowledge, and Skill Requirements** + Bachelor's or above in Chemistry, Biochemistry, or Biotechnology related scientific discipline. + Minimum of 5-7 years of GMP testing using capillary electrophoresis techniques in an FDA-regulated biotechnology, pharmaceutical company is required. + Working knowledge and experience with biochemistry analytical methods such as residual DNA by qPCR, host cell protein ELISA, Residual Protein A ELISA, binding activity ELISA, Capillary Electrophoresis (CE), capillary isoelectric focusing (cIEF), etc. + Familiar with Waters Empower Chromatography Data System. + Working knowledge with USP/EP and cGMP/EU GMP regulations. + Familiar with instrument and equipment validation. + Impressive, demonstrable track record and skills/experience gained within a similar position(s), at a similar level. + Strong leadership/team management skills and experience. + Credible and confident communicator (written and verbal) at all levels. + Strong analytical and problem-solving ability. + Hands-on approach, with a 'can do' attitude. + Ability to prioritize, demonstrating good time management skills. + Excellent attention to detail, with the ability to work accurately in a busy and demanding environment. + Self-motivated, with the ability to work proactively using own initiative. + Committed to learning and development. **Significant Contacts** + Interacts with all levels of BeOne employees. **Supervisory Responsibilities:** + N/A **Computer Skills:** + Strong PC literacy required; MS Office skills (Outlook, Word, Excel, PowerPoint). **Travel:** + Must be willing to travel approximately 10%. + Ability to work on a computer for extended periods of time. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Title: Senor Scientist I, QC WuXi Biologics is a is a leading global open-access biologics technology platform offering end-to-end solutions to empower organizations to discover, develop, and manufacture biologics from concept to commercial manufacturing. WuXi Biologics' achievements are a direct result of the efforts made by our employees. We have built an extraordinary team motivated by our PROUD culture of Passion, Reward, Opportunity, Unity, and Determination. WuXi Biologics offers exciting job opportunities and careers around the globe. We currently employ over 12,000 people and provide services to more than 600 customers worldwide, including all the top 20 biopharmaceutical companies Position Overview The Associate Director of Organization Development (OD) & Employee Relations (ER) is a strategic HR leader responsible for driving initiatives that strengthen organizational culture, optimize workforce effectiveness, and foster an engaging, high-performance workplace. This role combines expertise in organization development with deep employee relations acumen to shape programs that enhance leadership capability, employee engagement, and workplace equity while proactively managing employee relations to minimize risk and build trust across the organization. Key Responsibilities * Understand GMP and follow instructions on the documents. * Perform micro, raw materials, compendia related testing including but not limit to bioburden, pH, growth promotion, endotoxin, conductivity, TOC, nitrate, execute lab procedures according to and in compliance with cGMP guidelines and internal SOPs. * Receive required samples, perform testing, plate reading, plate transferring, report results independently and in a timely manner. * Conduct EM/water/gas sampling in cleanroom areas in/between the various building sites in Cranbury or other US sites (when needed). * .Support RM sample sampling and its transporting needs in/between the various building sites in Cranbury or other US sites (when needed). * Management of raw material, EM monitoring samples, raw material sampling room, sample storage room and regulatory retain sample room, etc., and ensuring the sampling process and storage of raw material samples or incubation of EM samples are under conducted properly and within control. * Support reagents/consumables inventory/invoices management to ensure consistent QC Micro/RM/Compendia operation needs. * Ensure that all data from the laboratory is in accordance with good GDP practices to ensure data integrity * Ensure compliance with training, preparation, documentation and general lab maintenance requirements for Industry Standards and/or Regulations * Generate documents such as, SOPs, analytical methods, and On The Job training and trains junior staff on methods * Optimize methods to improve efficiency while adhering to Quality Control standards * Troubleshoot any issues on assays, instrument, or reagents. * Preparing or executing validation documents to support new materials, process changes and qualifications * Investigate any OOS/OOT and atypical results and laboratory investigations, conduct root cause analysis, and implement CAPA. * Attend internal and external meetings and present data summary, investigation results, or trending analysis to project teams or clients. * . Proactively respond to and participate in scheduled audits and able to defend methodologies to auditors * Any other duties assigned by the supervisor (when applicable). Qualifications: * Full-time undergraduate degree or above, majoring in biology, chemical engineering, chemistry, pharmacy or related majors. * Bachelor's degree: at least 9-11 years of experience in the professional field * Master's degree: at least 7-9 years of experience in the professional field. * PhD: at least 2-4 years of experience in the professional field. * Extensive experience in micro assay, RM assay, analytical assays * Ability to generate protocol and report independently. * Ability to follow GMP guidance and all QC general SOPs. * Ability to draft SOP or AMP for operating equipment and performing analytical testing. * Ability to document and review experiments following GDP and ALCOA+ principles. * Ability to perform and review data analysis/work independently * Ability to conduct basic troubleshooting. * Ability to draft quality events, including lab investigation and deviation * Ability to complete work within pre-defined timeline. Effective multi-tasking skills and time management required * Ability to draft EM trending report independently * Able to provide suggestions to update and optimize AMPs/sampling plans accordingly. * Ability to adapt between strategic and tactical thinking/planning and manage multiple priorities to achieve department and site objectives * Ability to understand technical data * Able to work on the weekend when needed. * Support shift work when needed. * Basic experience in planning and ability to solve simple technical and operation problems * Able to raise issues immediately to supervisor and work with supervisor when doubt. The job description does not intend to list all the duties and responsibilities assigned to this position. Employee holding this position would be required to perform other job-related duties/responsibilities based on their expertise and company business needs. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability

Quality Control Analytical ScientistAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The QC Analytical Scientist will be a member of the Quality Control Department. As a Senior Member of the team the QC Analytical Scientist will be involved in various QC projects and should have a deep understanding of general QC flow and the Product Cycle. Support internal and external customers to ensure that proper and timely execution of all aspects of the clinical analytical method life cycle across clients. Support routine GMP testing as assigned. Mentor and train team members Evaluate corporate and regulatory requirements along with coordination of activities for implementation of these requirements. Write the contents of Analytical Method Transfer and Validation life cycle documentation including master plans, protocols, test methods, and reports. Create validation project plan i.e., timelines and resources and provides status updates to management. Utilize statistical tools for evaluation of method validation and trending data. Identify, evaluate, and implement continuous business process improvements. Perform troubleshooting activities with respect to methods/assays, equipment malfunctions and investigations (Deviations and OOS). Provide support during laboratory investigations. Train QC personnel during method transfer and validation. Provide support during equipment qualification. Consistently produce elevated level of documentation accuracy and clarity according to cGMP documentation practices. Ability to set deadlines and prioritize work for self, group members, and support groups involved. Ability to review/approve work performed by coworkers for accuracy and alignment with procedures. Indirectly may supervise cross functional teams including product development, QA, PMP, and Manufacturing. REQUIREMENT B.S Analytical Chemistry or other scientific field or MS/Ph.D. in Analytical Chemistry or other scientific field with demonstrated experience in Quality Control laboratories for biotechnology products. 8-10 years of experience in the areas of method development, validation, and transfer. Direct GMP Experience. Proficiency in project management skills and tools. Strong background and in-depth knowledge in analytical chemistry e.g. Flow Cytometry, ELISA, HPLC, CE, PCR, etc. Extensive knowledge and experience of QC assay development, transfer and validation, along with cGMPs. Strong Quality orientation with attention to detail required. Analytical and problem-solving skills required. Excellent communication skills, both written and verbal, with all levels of the organization, including the ability to state opinions clearly, ask questions, seek clarification, communicate facts objectively, challenge when appropriate, and pursue issues to resolution. Excellent presentation skills. Ability to communicate to upper management, across departments and within the immediate QC team. Ability to create and manage work plans and timelines and independently manage competing priorities with limited instruction. Highly motivated individual with good interpersonal skills that have proven effective in managing relationships and negotiating solutions while maintaining a level of approachability with colleagues both internal and external. Must be familiar with GMP lab environment and Aseptic techniques. Working EnvironmentMust have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays, or overtime and as required by the company May be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen Must have the ability to work with specialized equipment Must be able to handle the standard/moderate noise of the manufacturing facility May work with hazardous materials and chemicals Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

MACOM designs andmanufactures semiconductor products for Data Center, Telecommunication, and Industrial and Defense applications. Headquartered in Lowell, Massachusetts,MACOM has design centers and sales offices throughout North America, Europe,and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 65years of application expertise with multiple design centers, Si, GaAs and InPfabrication, manufacturing, assembly and test, and operational facilitiesthroughout North America, Europe, and Asia. In addition, MACOM offers foundry servicesthat represents a key core competency within our business. MACOM sells anddistributes products globally via a sales channel comprised of a direct fieldsales force, authorized sales representatives, and leading industrydistributors. Our sales team is trained across all of our products to give ourcustomers insights into our entire portfolio. Title: Quality ControlInspector Asa Quality Inspector, you will be responsible for verifying all requireddocuments that are involved/required with the parts/products you areinspecting. Document any non-conformances in detail on the Company's Q-notesystem. This includes all areas of quality control, incoming inspection, in-processinspection and final inspection. When not working with the microscope, you willbe verifying measurements with handheld measuring tools. Key Responsibilities: Perform incoming inspection, in-process inspection, first article inspection and final inspection of electronic and mechanical components with little to no assistance. Schedule source inspections as required. Generate internal and external reports. Generate and maintain data for the control of documentation, effectively report information, and accurately respond to questions from team members, internal suppliers, and customers. Communicate non-conformances and work with Quality and Manufacturing to drive corrective actions. Ensure all incoming, in-process and final materials meet specifications. Perform routine SAP transactions to move, disposition, and route material. Key Competencies & Skills Required: Safe handling of ESD sensitive materials. Working knowledge of SAP, Agile, Excel, MSWord and Outlook. Ability to prepare oral and written reports clearly and concisely. Excellent internal and external communication skills. Advanced understanding of quality control standards and testing techniques. Knowledge of statistical sampling techniques. Able to lift up to 20 pounds. Able to sit for periods of time working with a microscope. Required Qualifications and Experience: High School diploma (or equivalent) or AS degree (preferred). Minimum 2 years Quality Control inspection experience (preferred). Self-motivated with the ability to evaluate complex issues in a high-pressure environment. Knowledge of all aspects of inspection and testing. Experience with Mil-PRF-38534, class H & K; Hybrids, Mil-STD-883; methods 2008, 2009, 2010, 2017 Semiconductors and Passive devices. Knowledge of IPC-600 and 610, J-STD-001. Knowledge and experience in performing mechanical and electronic inspections. Ability to work from technical drawings, sketches and specifications. Due to ITAR regulations, U.S. citizenship or permanent residency required. The Salary Range for this position is $25.00-$28.00.Actual salary offered to candidate will depend on several factors, includingbut not limited to, work location, relevant candidates' experience, education,and specific knowledge, skills, and abilities. Benefits: This position offers a comprehensive benefits packageincluding: Health, dental, and vision insurance. Employer-sponsored 401(k) plan. Potential for performance-based bonus. Paid time off. Professional development opportunities. EEO: MACOM is an EqualOpportunity Employer committed to a diverse workforce. MACOM will not discriminateagainst any worker or job applicant on the basis of race, color, religion, sex,gender identity, sexual orientation, national origin, age, disability, geneticinformation, veteran status, military service, marital status, or any othercategory protected under applicable law. Reasonable Accommodation: Reasonable Accommodation. MACOM is committed to working with and providingreasonable accommodations to qualified individuals with physical and mentaldisabilities. If you have a disability and are in need of a reasonableaccommodation with respect to any part of the application process, please call+1-978-###-#### or email [email protected]. Provide your name, phone number andthe position title and location in which you are interested, and nature ofaccommodation needed, and we will get back to you. We also work with currentemployees who request or need reasonable accommodation in order to perform theessential functions of their jobs.

About GenScript GenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy. GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology. About ProBio ProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The position reports to the Sr. QC Manager, is ideally suited for a professional with extensive technical knowledge, and a proven track record of developing and carrying out processes, that are suitable for use in GMP manufacturing of a wide range of clinical trial materials, and participating in the technology transfer. There is a great opportunity to lead and evolve this function within a CDMO business, to support a broad portfolio and advance the manufacturing capabilities to deliver products to the client projects that transform the lives of patients. Responsibilities Oversee GMP manufacturing facility consisting of design, construction, validation of facility, and supply chain system and operations. Oversee the preparation and management of complex GMP manufacturing facility development plans, budgets, and long-range planning Perform a wide range of analytical tests, including but not, UV-Spectrophotometry, qPCR, ELISA, HPLC, Endotoxin, MicroBCA, Electrophoresis, and DNA Sequencing/Analysis. Support QC-Analytics initiatives including equipment qualification, method development, method validation, and tech-transfer. Execute protocols related to QC-Analytic initiatives. Ensure compliance with cGMP and regulatory requirements. Develop and lead optimization initiatives to improve QC department. Responsible for following cGMP in carrying out functions related to QC testing. Perform other duties, as assigned based on business needs. Qualifications: Bachelor's degree in Molecular Biology, Biochemistry, Microbiology or related scientific field with 1-2 years of relevant work experience (Experience in gene and cell therapy recombinant plasmid DNA products a plus). Experience working with QC intermediate and release testing, raw material testing, or validation testing. Experience working with Electrophoresis, UV-Spectrophotometry, HPLC, qPCR, ELISA or DNA Sequencing/Analysis. Experience testing plasmid DNA. Experience testing viral vectors is a plus. Familiar with principles of Good Documentation Practices, Data Integrity, ALCOA+ Experience following Standard Operating Procedures or protocols Ability to problem solve, and work independently and as part of a team. Emphasis on the ability to work in a team atmosphere. Experience with Microsoft Office tools. Experience with statistics, coding, programming, troubleshooting, and/or data management software is a plus. Strong interpersonal, verbal, and written communication skills. Exposure to documentation life cycle, by way of authoring, reviewing and/or approving GMP documents, such as procedures, test methods, protocols, reports, etc. Compensation: The salary range, dependent upon experience level, is $50,000 - $70,000 annually. #LW #PB GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

SGS is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With over 97,000 employees in 130 countries and operating a network of more than 2,400 offices and laboratories, we provide services to almost every industry by assuring quality and safety of products and services. Trusted all over the world, SGS is a market leader because we put 100% passion, pride and innovation into everything we do. We encourage new ideas. We welcome people who challenge the way we do things. And we will be 100% committed to helping you reach your full potential. As a Laboratory Technician, under general supervision, performs laboratory tests to determine the performance, chemical, and/or physical composition of consumer products. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine laboratory testing, following the relevant company's Standard Operating Procedures (SOP's) and methods. Validate performance on methods as required. This position conducts sample preparation, extractions, and digestion of various organic and inorganic substances for consumer product testing purposes. Perform extractions in order to prepare samples for instrumentation. Digests samples to support testing needs. Coordinates samples submitted for Chemistry testing by the Central Processing team. Confirms that the samples submitted are enough to perform the required/requested testing Test to applicable standards (ASTM, CSPA, ISO, SSC, etc.) and customer-specific protocols. Determines the type of testing based on the appropriate guidelines and regulations. Demonstrates good and safe work habits and enforces a clean working environment. May be required to receive, sort, log client samples into the database, and prepare sample labels. May be required to archive, return, or dispose of client samples as per the established procedure. Perform daily, weekly, and monthly Quality Assurance/Quality Control checks on equipment. Assist in keeping inventory of laboratory chemicals and equipment necessary for the day to day functioning of the laboratory and in compiling a list of supplies to be ordered when needed. Assists in calibration/verification tasks and other ISO 17025 related activities. Ensure all personal protective equipment (PPE) relevant for tasks are worn at all times. Adheres to internal standards, policies, and procedures Performs other duties as assigned. Qualifications Required: Associates Degree in Chemistry or related scientific disciplines preferred Working in a lab setting with experience following strict safety standards, or equivalent education and experience Preferred: Bachelor's Degree or above in related scientific disciplines Computer Skills: Microsoft Office Suite (Outlook, Excel, and Word) - Basic user proficiency required Ability to work independently under the direct supervision Ability to execute detailed but uninvolved written or oral instructions Ability to read and understand documents such as safety rules, operating and maintenance instructions, and procedure manuals Ability to deal with problems involving a few concrete variables in standardized situations Ability to follow directions to ensure the end results are accurate and completed with the required timeframe Pay Range: $21.00-$26.00/ hour Additional Information Benefits Competitive salary. Comprehensive health, dental, and vision insurance for full time employees. Retirement savings plan. Continuous professional development and training opportunities. A dynamic, collaborative work environment. Access to cutting-edge cryptographic technology and tools. Physical Demands of the Job Stand: Occasionally Move or traverse: Frequently Sit: Constantly Use hands: Constantly Reach with hands and arms: Occasionally Climb or balance: Occasionally Stoop, kneel, crouch or crawl: Occasionally Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Occasionally 30 lbs Additional information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

About Atrium: What you do matters. As a people-centric organization, we foster an environment of collaboration, high performance, and innovation where your talents are valued and your achievements are celebrated. Join us and become part of an inclusive team. Client Overview: Our client is a leading pharmaceutical contract development and manufacturing organization (CDMO), specializing in oral solid dosage and ingestible powder products. They partner with pharmaceutical companies to support drug development and manufacturing needs with a strong focus on quality, compliance, and innovation. They are now looking for a Quality Control Chemist. Salary/Hourly Rate: $30/hr - $33/hr Position Overview: Our client is seeking a skilled Quality Control Chemist to join their onsite team. The Quality Control Chemist will play a critical role in quality control testing, data interpretation, and regulatory compliance within a fast-paced pharmaceutical CDMO environment. This position is ideal for candidates with hands-on experience in analytical instrumentation and a strong understanding of GMP standards. Responsibilities of the Quality Control Chemist: * Perform QC testing of raw materials and finished products (tablets, capsules, and other dosage forms) using techniques such as HPLC, UPLC, GC, UV-Vis, FT-IR, dissolution apparatus, and particle size analysis. * Independently interpret and report analytical results, maintaining detailed and accurate laboratory records. * Ensure compliance with regulatory standards including FDA and EMA guidelines. * Operate, calibrate, and maintain analytical instruments and laboratory equipment. * Collaborate with cross-functional teams including R&D and production to support product development and release. * Provide technical support and training to junior staff as needed. Required Experience/Skills of the Quality Control Chemist: * 3 - 7 years of hands-on experience in a pharmaceutical analytical laboratory. * Proficiency with analytical instruments such as HPLC/UPLC, GC, UV-Vis, FT-IR, and dissolution apparatus. * Strong documentation skills aligned with cGMP guidelines. * Ability to troubleshoot analytical techniques and instrumentation. * Excellent attention to detail and problem-solving capabilities. Preferred Experience/Skills of the Quality Control Chemist: * Experience working in a CDMO environment. * Familiarity with ingestible powder and oral solid dosage product testing. * Knowledge of international regulatory standards and quality systems. Education Requirements: * Bachelor's degree (minimum) in Chemistry, Analytical Chemistry, Biochemistry, Biology, or a related scientific field. Benefits: * Atrium Care Package available, upon eligibility (including healthcare plans, discount programs, and paid time off).

Our client is seeking Full -Time Clinical Lab Technologists for their Chemistry Lab! Full time - Alternate Weekends 11:30 pm - 8:00 am 10% night shift differential!! Perform routine and emergency tests on blood and other body fluids using a variety of automated and manual instrumentation promptly. Maintain equipment and records according to department procedures and regulatory agencies guidelines in the areas of QA and QC. Use independent judgment to solve technical and procedural problems. In some instances, the ability to stand or sit for extended periods of time is necessary. Pay Range based on experience: $82,979.96 - $103,286.06 Requirements Must have an active New York license At least 2 years of work experience preferred Bachelor's Degree in physical science, medical technology preferred. Benefits 1199 Members Medical & Dental 403B matching up to 8% of salary Room for Growth Great leadership and support, utilizing the latest advances in computer technology.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology.About ProBioProBio proactively provides end-to-end CDMO service from drug discovery to commercialization with proactive strategies, professional solutions and efficient processes in cell and gene therapy, vaccine, biologics discovery and antibody protein drug to accelerate drug development for customers. ProBio's total cell and gene therapy solution covers CMC of plasmid and virus for IND filing as well as clinical manufacturing and commercial manufacturing. Job Scope: The position reports to the Sr. QC Manager, is ideally suited for a professional with extensive technical knowledge, and a proven track record of developing and carrying out processes, that are suitable for use in GMP manufacturing of a wide range of clinical trial materials, and participating in the technology transfer. There is a great opportunity to lead and evolve this function within a CDMO business, to support a broad portfolio and advance the manufacturing capabilities to deliver products to the client projects that transform the lives of patients. Responsibilities Oversee GMP manufacturing facility consisting of design, construction, validation of facility, and supply chain system and operations. Oversee the preparation and management of complex GMP manufacturing facility development plans, budgets, and long-range planning Perform a wide range of analytical tests, including but not, UV-Spectrophotometry, qPCR, ELISA, HPLC, Endotoxin, MicroBCA, Electrophoresis, and DNA Sequencing/Analysis. Support QC-Analytics initiatives including equipment qualification, method development, method validation, and tech-transfer. Execute protocols related to QC-Analytic initiatives. Ensure compliance with cGMP and regulatory requirements. Develop and lead optimization initiatives to improve QC department. Responsible for following cGMP in carrying out functions related to QC testing. Perform other duties, as assigned based on business needs. Qualifications: Bachelor's degree in Molecular Biology, Biochemistry, Microbiology or related scientific field with 1-2 years of relevant work experience (Experience in gene and cell therapy recombinant plasmid DNA products a plus). Experience working with QC intermediate and release testing, raw material testing, or validation testing. Experience working with Electrophoresis, UV-Spectrophotometry, HPLC, qPCR, ELISA or DNA Sequencing/Analysis. Experience testing plasmid DNA. Experience testing viral vectors is a plus. Familiar with principles of Good Documentation Practices, Data Integrity, ALCOA+ Experience following Standard Operating Procedures or protocols Ability to problem solve, and work independently and as part of a team. Emphasis on the ability to work in a team atmosphere. Experience with Microsoft Office tools. Experience with statistics, coding, programming, troubleshooting, and/or data management software is a plus. Strong interpersonal, verbal, and written communication skills. Exposure to documentation life cycle, by way of authoring, reviewing and/or approving GMP documents, such as procedures, test methods, protocols, reports, etc. Compensation: The salary range, dependent upon experience level, is $50,000 - $70,000 annually. #LW #PB GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Dayton, NJ laboratory is seeking an entry-level Lab Technician I to join their General Chemistry team! The Lab Technician I will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. Work independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. Always follow safe laboratory practices and maintain a safe working environment. Job Functions After appropriate training independently prepare samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologies Performs routine operation, maintenance, calibration of prep instruments/equipment May assist with validation and MDL studies. Inputs and maintains technical information as needed to support the laboratory functions/operations. Maintains Laboratory Notebook where applicable. Adheres to internal standards, policies, and procedures. Performs other duties as required. Qualifications High school diploma (Required) 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required) Associates Degree in a Chemistry or similar scientific discipline (Preferred) 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) Language Skills: English (Required) Mathematical Skills: Basic (Required) Reasoning Skills/Abilities: Basic (Required) Computer Skills: Basic (Required) Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.