Quality control technician jobs in Columbus, GA - 51 jobs

Quality Lead (AWS/CWI) Contract- 3 Years Client- Southern Company. We are seeking an experienced Quality Lead to provide construction quality oversight across Georgia Power Hydro sites as part of the Hydro Modernization Program. This role will be filled as QCA3 or QCA2 depending on the candidate's qualifications and experience. The position requires travel between sites to ensure all work is executed to the highest quality standards, in compliance with applicable codes and specifications. Key Responsibilities Quality Planning & Oversight Assist project management with the development and implementation of the project quality plan. Provide oversight of onsite contractors, ensuring work complies with specifications, codes, and quality standards. Develop and maintain surveillance schedules to ensure continuous quality monitoring. Inspections & Documentation Perform required surveillances, audits, and quality checks on construction activities. Review inspection and test plans (ITPs) for accuracy and compliance. Ensure contractor quality documentation meets project and regulatory requirements. Project Support Participate in pre-bid, pre-mob, and contractor meetings to confirm understanding of quality requirements. Support construction management with preventative maintenance activities. Review and redline engineering drawings, specifications, and submittals to ensure compliance. Compliance & Standards Apply knowledge of industry standards (ASME, AWS, ANSI, ASTM, ACI, etc.) to verify proper implementation. Identify hold points and witness points during construction and ensure compliance is documented. Report non-conformances and recommend corrective actions. Qualifications Education: 4-year technical degree in Engineering, Construction, or related discipline preferred. Equivalent industry experience may be considered. Experience: 10+ years in construction quality assurance or quality control oversight, preferably in hydro or power generation projects. Experience with weld inspection, mapping, and quality surveillances strongly preferred. Certifications (Preferred): CWI/AWS certification required. AMPP/NACE certification a plus. Knowledge & Skills: Strong knowledge of QA/QC processes, inspection strategies, and methodologies. Familiarity with welding, coatings, and materials inspections. Ability to read and interpret engineering drawings and specifications. Excellent communication and teamwork skills. Self-starter with the ability to work independently or in a team environment. Work Environment Primarily field-based with regular travel between multiple hydro sites. Requires working in industrial and construction environments, adhering to strict safety protocols. Must be flexible and proactive to support emergent site needs.

**$500 Sign on Bonus ( $250 paid at 3 months of employment & $250 paid at 6 months of employment) Pay pays $16.00 an hour Shift ( 11pm-7a) flexibility required Quality Assurance technician tests and inspects products in the manufacturing environment to ensure the quality of the product. The technician works on a variety of products in all phases of production. The QA will work in the lab examining products, taking samples, and conducting experiments to ensure that customer and company specifications are met. The QA Technician will report any defects and make recommendations for improvements. The Quality Assurance department of the company aims to stop wasteful production of poor quality products and helps to ensure that customers do not receive malfunctioning products. The Quality Assurance technician monitors the operation to ensure product is manufactured and handled properly (Sanitation Operations & GMP's). Position Duties/ Responsibilities: Inspect product through sensory evaluation for defects Inspect finish product for correctness Check product for specified colors, textures, etc Test raw material, ingredients, packaged finished products, packing materials Determine overall product quality by conducting and evaluating various product tests Use test equipment to determine if product meets customer specifications Conduct quality checks on production floor documents to ensure completeness and accuracy Use measuring equipment, electronic equipment, scales to perform testing and analysis Consult with QA Supervisor regarding any defects; aids in recommendations for improvement and corrections Observe product, processes and plant environment for any possible hazards Examine materials and ingredients from supplier to ensure compliance with specifications Inspect final product made with materials from supplier Perform direct observation on SOP' and GMP's and record results Accurately complete required documents and forms required for recordkeeping Review HACCP records to ensure that HACCP requirements are met and properly documented Knowledge/Skills/Abilities: Excellent verbal and written communication skills Must move with sense of urgency; time management skills are essential Ability to think, comprehend and retain large amounts of information Keen observation and evaluation ability Ability to make sound decisions under pressure Ability to work under minimal supervisor; self motivated to produce results Education/Experience: High school diploma or GED Two (2) year of prior Quality Control experience is required; preferably in a food manufacturing setting Work Environment: Will work in environment where safety precautions are required to be followed Protective gear such as gloves, work boots, and smocks required at all times Will work around moving machinery Availability to work outside of normally scheduled shift hours and work overtime when required Physical Demands: Light to moderate physical effort required Regularly required to walk, reach, bend and stand for long periods of time throughout the day Must be able to lift up to 50 lbs Will be expected to perform other related duties and assignments as requested or directed Chairmans Foods is an EEO Employer and conducts background checks and drug testing as part of the hiring process.

**Country:** United States of America , Midland, GA, 31820 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. We have an opportunity for a **_Quality Technical Team Member_** to be based in Columbus, GA. (onsite role) **What You Will Do:** + Records for Blades and Disks: + Input and store Columbus Forge LPA records. + Maintain inventory and storage of Level 4 documentation records for Columbus Operations. + Log and ballot Columbus Forge quality procedures, standard work, and forms for Columbus Operations. + Check Level 4 documentation records in and out of SharePoint for maintenance by operational functional teams. + Other duties as assigned. + Compile and distribute results of the LPA audits to operational Business Unit Leaders. + Run CAR status reports for Tier 4 meetings for Operations Leadership. + Generate communication for Toolbox Talks delivered to employees to inform the workforce of key issue awareness. + Process and Expedite Level 4 Documentation Ballots with operational teams. + Process and expedite Level 1 through Level 3 documentation ballots with operational teams. + Support Level 4 Documentation TPM with executing and expediting reviews and input, as requested. + Perform 6s each shift + Engage in process optimization to allow success of production/quality goals while achieving and maintaining cost savings + Complete all training within the expected time given **Qualifications You Must Have:** + HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline + Minimum of 1 year of relevant work experience **Qualifications We Prefer:** + Experience in manufacturing environment + Quality assurance or quality control experience is a plus **What We Offer:** + Medical, dental, vision and life insurance + Short-term disability, long-term disability and parental leave + 401(k) match + Flexible spending accounts + Employee assistance program + Employee Scholar Program (No waiting period!) + Paid time off including: 3 weeks of vacation, 5 personal sick days, 3 unpaid days for unique situations at supervisor discretion, and 12 paid government holidays **Additional Information:** Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship. **What is my role type?** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely. There are three Machine Operator levels (I, II, & III). The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime. ESSENTIAL DUTIES AND RESPONSIBILITIES: Read and interpret blueprints and technical drawings to determine dimensions and layout requirements. Accurately measure materials using tape measures and other precision tools. Operate circular saws, specialized saw equipment (including setup and maintenance), and basic cutting tools. Operate lift trucks and forklifts to move and stage materials after completing certification requirements. Safely handle and transport materials, including lifting up to 50 lbs as needed. Follow standard operating procedures (SOPs) to ensure consistency, quality, and efficiency in pre-cut operations. Collaborate with team members to maintain a productive and quality-focused work environment. Actively participate in team meetings and report discrepancies or quality issues to supervisors. Verify materials meet required quality standards before advancing to the next phase of production. Perform routine inspection and maintenance of cutting tools, saw equipment, and lift trucks to ensure safe operation. Cross-train on other production functions as business need dictates. Clean and maintain assigned area to ensure proper functionality. Report and assist with resolving safety, quality, and mechanical issues. Participate in the continuous improvement process. If appropriate, set up and operate various off-line and secondary equipment. Perform other duties or tasks as assigned EDUCATION REQUIREMENT: High school diploma or general education degree (GED) EXPERIENCE REQUIREMENT: One to two years related experience and/or training . OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to function effectively in a team setting. Ability to multi-task while maintaining attention to detail. Demonstrates reliability, flexibility, and dependability. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENRAL PURPOSE OF THE JOB: The Quality Technician conducts testing on incoming and outgoing materials to ensure conformance to all quality requirements both internal and external. In addition, this role maintains the lab in a safe and organized manner to comply with all corporate or governmental policies for safety, environmental, and quality and assists with plantwide ISO 9001 compliance in whatever capacity required. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform daily, weekly, monthly, and annual batch testing activities per product and procedural requirements. Perform periodic calibrations of lab and plant equipment. Participate in the development of quality specifications for raw materials, finished products or substitute materials. Support ISO Quality systems by understanding quality expectations, work instructions, and completing proper quality documentation. Perform periodic quality audits of production processes and finished goods. Communicate with other departments about the status of quality material. Perform first piece inspections on finished products. EDUCATION: High school diploma or general education degree (GED) required EXPERIENCE: One to two years related experience and/or training Minimum one year of related experience working in Extruded Rubber Products (ERP) or similar industry. OTHER SKILLS AND ABILITIES: ISO knowledge Knowledge of lab testing and extrusion/mixing raw materials preferred Strong communication skills (written and verbal) Strong computer skills in MS Office Suite (Word, Excel, Outlook) All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENRAL PURPOSE OF THE JOB: The Quality Technician conducts testing on incoming and outgoing materials to ensure conformance to all quality requirements both internal and external. In addition, this role maintains the lab in a safe and organized manner to comply with all corporate or governmental policies for safety, environmental, and quality and assists with plantwide ISO 9001 compliance in whatever capacity required. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Perform daily, weekly, monthly, and annual batch testing activities per product and procedural requirements. * Perform periodic calibrations of lab and plant equipment. * Participate in the development of quality specifications for raw materials, finished products or substitute materials. * Support ISO Quality systems by understanding quality expectations, work instructions, and completing proper quality documentation. * Perform periodic quality audits of production processes and finished goods. * Communicate with other departments about the status of quality material. * Perform first piece inspections on finished products. EDUCATION: * High school diploma or general education degree (GED) required EXPERIENCE: * One to two years related experience and/or training * Minimum one year of related experience working in Extruded Rubber Products (ERP) or similar industry. OTHER SKILLS AND ABILITIES: * ISO knowledge * Knowledge of lab testing and extrusion/mixing raw materials preferred * Strong communication skills (written and verbal) * Strong computer skills in MS Office Suite (Word, Excel, Outlook) All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENRAL PURPOSE OF THE JOB: The Quality Technician conducts testing on incoming and outgoing materials to ensure conformance to all quality requirements both internal and external. In addition, this role maintains the lab in a safe and organized manner to comply with all corporate or governmental policies for safety, environmental, and quality and assists with plantwide ISO 9001 compliance in whatever capacity required. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform daily, weekly, monthly, and annual batch testing activities per product and procedural requirements. Perform periodic calibrations of lab and plant equipment. Participate in the development of quality specifications for raw materials, finished products or substitute materials. Support ISO Quality systems by understanding quality expectations, work instructions, and completing proper quality documentation. Perform periodic quality audits of production processes and finished goods. Communicate with other departments about the status of quality material. Perform first piece inspections on finished products. EDUCATION: High school diploma or general education degree (GED) required EXPERIENCE: One to two years related experience and/or training Minimum one year of related experience working in Extruded Rubber Products (ERP) or similar industry. OTHER SKILLS AND ABILITIES: ISO knowledge Knowledge of lab testing and extrusion/mixing raw materials preferred Strong communication skills (written and verbal) Strong computer skills in MS Office Suite (Word, Excel, Outlook) All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

This position is responsible for managing the inventory of supplies for the Columbus Consolidated Government. * Purchases supplies and distributes supplies to supervisors; performs special orders as needed. * Inspects incoming deliveries for quality and quantity; contact vendors regarding incorrect deliveries. * Orders uniforms; checks divisional budget accounts to ensure that funds are available for uniform and boot purchases. * Assists other sections within Integrated Waste as needed. * Performs other related duties as needed. * Knowledge of inventory control techniques. * Knowledge of basic accounting practices. * Knowledge of the standard office equipment. * Knowledge of general office procedures such as filing, coding, and bookkeeping. * Skill in the use of computers. * Skill in maintaining records. * Skill in oral and written communication. * Ability to read, write, and perform basic calculations. * Ability to work independently with minimal supervision. Knowledge and level of competency are commonly associated with the completion of specialized training in the occupational field, in addition to basic skills typically associated with a high school education. Sufficient experience to understand the basic principles relevant to the major duties of the position, usually associated with the completion of an apprenticeship/internship or having had a similar position for one to two years. The work is typically performed while intermittently sitting, standing, stooping, walking, bending, or crouching. The employee frequently lifts light and occasionally heavy objects, climbs ladders, uses tools or equipment requiring a high degree of dexterity, and distinguishes between shades of color. * Balancing - maintain equilibrium to prevent falling while walking, standing, or crouching. * Climbing - ascending, descending ladders, stairs, ramps, requires body agility. * Crouching - bending body forward by bending leg, spine. * Feeling - perceiving attributes of objects by touch with skin, fingertips. * Grasping - applying pressure to object with fingers, palm. * Handling - picking, holding, or working with whole hand. * Hearing 1 - perceiving sounds at normal speaking levels, receive information. * Kneeling - bending legs at knee to come to rest at knees. * Lifting - raising objects from lower to higher position, moving objects side to side, using upper extremities, back. * Manual Dexterity - picking, pinching, typing, working with fingers rather than hand. * Mental Acuity - ability to make rational decisions through sound logic, deductive reasoning. * Pulling - use upper extremities to exert force, haul or tug. * Pushing - use upper extremities to press against objects with force, or thrust forward, downward, outward. * Reaching - extending hands or arms in any direction. * Repetitive Motion - substantial movements of wrists, hands, fingers. * Speaking - expressing ideas with spoken word, convey detailed, important instructions accurately, concisely. * Standing - for sustained periods of time. * Stooping - bending body downward, forward at waist, with full motion of lower extremities and back. The work is typically performed in an office, library, computer room, stockroom, or warehouse.

Performs a variety of quality control tests/inspections on products, materials, components, parts, etc., at various stages of the production process to ensure compliance with quality and reliability standards. Records statistical data. Analyzes data and writes summaries to validate or show deviations from existing standards. Recommends modifications to existing, or suggests new, standards, methods, and procedures. Typically, has up to 3 years of experience in position or specialization. Applies basic skills and may develop advanced skills using tools and equipment appropriate for the position or specialization. Duties and tasks are standardized. Resolves routine questions and problems and refers more complex issues to higher levels. Works independently and as a team promoting cohesion within Regal Rexnord while following standard procedures and written instructions to accomplish assigned and known tasks. Responsibilities: Requires ability to read complex drawings. Understand Bill of Materials and have a working knowledge of manufacturing processes that may include turning boring grinding balancing, heat treating, coatings or others needed to manufacture components to the drawings and specifications. Makes decisions on whether parts meet the drawing/router specs and write scrap tickets when non-conforming product is realized. Attach inspection reports and balance records to SAP. Must have the ability to read and calibrate all gauges available in the plant. Will need the ability to learn the CMM; this includes the Zeiss and Keyonce machines. Scanning and filing production routers and material certifications will be required. Coordinate returned product through the RMA process. Actively participate in process and department improvement discussions. Qualifications: MACHINES, TOOLS, EQUIPMENT, WORK AIDES: Must be computer proficient and SAP experience a plus Minimum Education: High school or GED Minimum Experience: A minimum of 3 years of experience in the field or in a related area Necessary Skills: High Level verbal and written communication skills- English primary High school level math skills Work in a constant state of alertness Regular and predictable attendance “Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a “U.S. Person”, which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position.” Benefits Medical, Dental, Vision and Prescription Drug Coverage Spending accounts (HSA, Health Care FSA and Dependent Care FSA) Paid Time Off and Holidays 401k Retirement Plan with Matching Employer Contributions Life and Accidental Death & Dismemberment (AD&D) Insurance Paid Leaves Tuition Assistance About Regal Rexnord Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com. Equal Employment Opportunity Statement Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you'd like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email ***************************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ***************************. Equal Employment Opportunity Posters Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

Purpose: The Quality Assurance Technician supports overall product quality by monitoring assembly line rejects, investigating issues, and ensuring parts are properly tagged and dispositioned. This role provides timely feedback to Production, supports Engineering investigations, and helps maintain compliance with established quality standards. Key Responsibilities include the following (other duties may be assigned as needed): Perform daily checks of assembly line rejects and provide timely feedback before parts leave the line. Support investigations in the tear-down area and assist Engineering teams with problem resolution. Provide support for special improvement and continuous quality projects. Ensure rejected parts are correctly dispositioned (scrap, Quality Market, shipping, or rework) and properly tagged. Generate accurate electronic reports of daily quality activities. Label bins for non-conforming parts and confirm that all bins have correct labels and certifications. Communicate immediately with production and work centers when issues are identified. Promote awareness of unlabeled or improperly dispositioned parts on the production floor. Provide guidance and oversight to Quality Auditors as needed. Qualifications: Education and Experience: High School Diploma or GED required; additional education preferred. Minimum of 1 year of quality experience in a manufacturing or assembly environment. Knowledge, Skills and Abilities: Familiarity with quality standards and inspection methods. Strong reading comprehension and analytical/mathematical skills. Proficiency in Microsoft Office applications (Word, Excel, PowerPoint, Outlook). Effective interpersonal and communication skills. Highly organized and detail-oriented. Comfortable with conflict resolution and receiving feedback. Demonstrated commitment to following procedures and policies. Team-oriented with a strong focus on continuous improvement. Legal Requirements: Must be at least 18 years of age due to federal labor law requirements. Must be legally authorized to work in the United States. Supervisory Responsibility: This position does not have direct supervisory responsibilities but may provide guidance to Quality Auditors. Working Conditions: Work is performed primarily in a manufacturing production facility. Exposure to moderate noise, moving machinery, and occasional variations in temperature. Required use of personal protective equipment (PPE) at all times, in accordance with company policy. Frequent interaction and collaboration with Production, Engineering, and Quality teams. May occasionally be required to work in meeting areas to complete documentation or attend meetings. Physical Requirements: Ability to lift up to 35 pounds. Ability to bend, stoop, stand and walk for extended periods (up to 4 hours at a time with scheduled breaks). Willingness to work in an environment requiring personal protective equipment (PPE). Equal Opportunity Employer Statement: HL Mando is an equal opportunity employer and value diversity in our workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, or disability status.

Specialty: Cath Lab Tech (Cardiac Catheterization Laboratory Technician) Experience: 1-2 years of Cath Lab or interventional radiology experience preferred License: Active State or Compact Radiologic Technologist License or ARRT Certification (if applicable) Certifications: BLS and ACLS required Must-Have: Strong knowledge of cardiovascular anatomy, sterile techniques, and interventional procedures Description: The Cath Lab Tech assists physicians during diagnostic and interventional cardiovascular procedures. Responsibilities include preparing and maintaining sterile fields, monitoring patient vitals, operating imaging equipment, and documenting procedures. The tech plays a key role in emergency cardiac care and recovery, often working in high-pressure, fast-paced environments. Requirements Required for Onboarding • ARRT or equivalent certification/license • BLS & ACLS Certifications

Cath Lab Tech Pay: Competitive weekly pay (inquire for details) Shift Information: Days AlliedTravelCareers is working with Health Advocates Network to find a qualified Cath Lab Tech in Columbus, Georgia, 31901! Benefits We Offer: Comprehensive health, prescription, dental, vision, life, and disability plans Competitive pay rates Referral opportunities ? Refer a friend & Cash in! Travel reimbursement and per diem allowances Employee discounts Educational opportunities Health Advocates Network was founded based on a shared aspiration to improve the way healthcare staffing is done. We are a company founded by healthcare professionals and built for healthcare professionals. As your true advocates, we will always help you thrive and pave the path forward in your career. Our talented staffing team is committed to providing exceptional customer service, great opportunities with top pay and benefits. From Per Diem to Travel Contracts, miles away or local to you, Health Advocates Network can find you just what you are looking for. Allow us to get you to you next adventure! About Health Advocates Network Health Advocates Network is a healthcare staffing agency founded by healthcare professionals, and built for healthcare professionals. We are dedicated to delivering exceptional service to both healthcare professionals and client facilities. With nationwide opportunities across allied health, nursing, and non-clinical roles, we specialize in travel, per diem, temp-to-perm, and direct hire placements. At Health Advocates Network, we believe that when healthcare professionals feel supported, empowered, and cared for, they deliver their best care. That's why we go beyond just placing talent-we build lasting relationships, provide dedicated support, and offer personalized opportunities that match your lifestyle and career goals. We are proud to be a multi-award-winning company, including multiple Best of Staffing Diamond Awards for Talent, Client, and Employee Satisfaction, and recognized among the Best Staffing Firms and Top Places to Work in Healthcare. Join a team that values your well-being, prioritizes your success, and champions the healthcare professionals who make a difference every day. 11217269EXPPLAT PandoLogic. Category:Healthcare, Keywords:Cardiology Technologist, Location:Columbus, GA-31906

Details Information Requisition Number S4933P Home Org Name National Ctr Asphalt Technology Division Name Samuel Ginn Col of Engineering Position Title Lab Tech Job Class Code HB01 Appointment Status Full-time Part-time FTE Limited Term No Limited Term Length Job Summary The Lab Tech prepares asphalt samples, collects data in the lab, on the Track, and in the field in support of NCAT pavement research and development. Essential Functions * Performs data collection in the asphalt laboratory, on the Test Track, and in the field on a wide-variety of pavement surfaces using industry-accepted devices and research prototypes. * Samples asphalt specimens from asphalt plants, the Test Track, and the field. * Prepares and tests asphalt specimens using industry-standard procedures. * Maintains experiments, lab classroom set-ups, and/or lab projects/services. * Coordinates the availability, use, and maintenance of laboratory equipment, materials, and/or key inventories. * Assists others by providing expertise and advice concerning laboratory operation and safety. * May oversee and train graduate and undergraduate students in the proper use of equipment and supplies. * May coordinate with industry and/or other university researchers and provide input on experimental designs and practical implications of research results. * Perform minor and basic construction on the Test Track under direct supervision. Why Work at Auburn? * Life-Changing Impact: Our work changes lives through research, instruction, and outreach, making a lasting impact on our students, our communities, and the world. * Culture of Excellence: We are committed to leveraging our strengths, resources, collaboration, and innovation as a top employer in higher education. * We're Here for You: Auburn offers generous benefits, educational opportunities, and a culture of support and work/life balance. * Sweet Home Alabama: The Auburn/Opelika area offers southern charm, vibrant downtown scenes, top-ranked schools, and easy access to Atlanta, Birmingham, and the Gulf of Mexico beaches. * A Place for Everyone: Auburn is committed to fostering an environment where all faculty, staff, and students are welcomed, valued, respected, and engaged. Ready to lead and shape the future of higher education? Apply today! War Eagle! Minimum Qualifications Minimum Qualifications Level I: High school diploma or equivalent Level II: High school diploma or equivalent and 1 year of experience in performing tests and/or research in a lab setting. Level III: High school diploma or equivalent and 4 years of experience in performing tests and/or research in a lab setting. Level IV: High school diploma or equivalent and 6 years of experience in performing tests and/or research in a lab setting. When a candidate has the required education, but lacks the required experience, they may normally apply additional appropriate education toward the experience requirement, at a rate of one (1) year relevant education per year of required experience. Minimum Skills, License, and Certifications Minimum Skills and Abilities Must have good team relations skills, exceptional oral and written communication skills, and excellent human relation skills. Attention to detail. Minimum Technology Skills Minimum License and Certifications Desired Qualifications Desired Qualifications * Bachelors degree * Experience in higher education * Experience or knowledge of asphalt Posting Detail Information Salary Range $32,090 - $61,500 Job Category Research Working Hours if Non-Traditional City position is located in: Auburn State position is located: Alabama List any hazardous conditions or physical demands required by this position Posting Date 11/25/2025 Closing Date Equal Opportunity Compliance Statement It is our policy to provide equal employment and education opportunities for all individuals without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, gender expression, pregnancy, age, disability, protected veteran status, genetic information, or any other classification protected by applicable law. Please visit their website to learn more. Special Instructions to Applicants Quick Link for Internal Postings ******************************************* Documents Needed to Apply Required Documents * Resume * Cover Letter Optional Documents Supplemental Questions Required fields are indicated with an asterisk (*). * * Please tell us how you first heard about this opportunity. (Open Ended Question) * * Please select the answer that best describes your current employment relationship with Auburn University: * Current full-time Auburn or AUM employee within probationary period * Current full-time Auburn or AUM employee outside of probationary period * Current part-time Auburn or AUM employee * Not an Auburn or AUM employee * * Do you have a high school diploma or equivalent? * Yes * No

Job Description Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

**$500 Sign on Bonus ( $250 paid at 3 months of employment & $250 paid at 6 months of employment) Pay pays $16.00 an hour Shift ( 11pm-7a) flexibility required Position Summary: Quality Assurance technician tests and inspects products in the manufacturing environment to ensure the quality of the product. The technician works on a variety of products in all phases of production. The QA will work in the lab examining products, taking samples, and conducting experiments to ensure that customer and company specifications are met. The QA Technician will report any defects and make recommendations for improvements. The Quality Assurance department of the company aims to stop wasteful production of poor quality products and helps to ensure that customers do not receive malfunctioning products. The Quality Assurance technician monitors the operation to ensure product is manufactured and handled properly (Sanitation Operations & GMP's). Position Duties/ Responsibilities: Inspect product through sensory evaluation for defects Inspect finish product for correctness Check product for specified colors, textures, etc Test raw material, ingredients, packaged finished products, packing materials Determine overall product quality by conducting and evaluating various product tests Use test equipment to determine if product meets customer specifications Conduct quality checks on production floor documents to ensure completeness and accuracy Use measuring equipment, electronic equipment, scales to perform testing and analysis Consult with QA Supervisor regarding any defects; aids in recommendations for improvement and corrections Observe product, processes and plant environment for any possible hazards Examine materials and ingredients from supplier to ensure compliance with specifications Inspect final product made with materials from supplier Perform direct observation on SOP' and GMP's and record results Accurately complete required documents and forms required for recordkeeping Review HACCP records to ensure that HACCP requirements are met and properly documented Knowledge/Skills/Abilities: Excellent verbal and written communication skills Must move with sense of urgency; time management skills are essential Ability to think, comprehend and retain large amounts of information Keen observation and evaluation ability Ability to make sound decisions under pressure Ability to work under minimal supervisor; self motivated to produce results Education/Experience: High school diploma or GED Two (2) year of prior Quality Control experience is required; preferably in a food manufacturing setting Work Environment: Will work in environment where safety precautions are required to be followed Protective gear such as gloves, work boots, and smocks required at all times Will work around moving machinery Availability to work outside of normally scheduled shift hours and work overtime when required Physical Demands: Light to moderate physical effort required Regularly required to walk, reach, bend and stand for long periods of time throughout the day Must be able to lift up to 50 lbs Will be expected to perform other related duties and assignments as requested or directed Chairmans Foods is an EEO Employer and conducts background checks and drug testing as part of the hiring process.

**Country:** United States of America , Midland, GA, 31820 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Job Description Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. We have an opportunity for a **_Quality Technical Team Member_** to be based in Columbus, GA. (onsite role) **What You Will Do:** + Records for Blades and Disks: + Input and store Columbus Forge LPA records. + Maintain inventory and storage of Level 4 documentation records for Columbus Operations. + Log and ballot Columbus Forge quality procedures, standard work, and forms for Columbus Operations. + Check Level 4 documentation records in and out of SharePoint for maintenance by operational functional teams. + Other duties as assigned. + Compile and distribute results of the LPA audits to operational Business Unit Leaders. + Run CAR status reports for Tier 4 meetings for Operations Leadership. + Generate communication for Toolbox Talks delivered to employees to inform the workforce of key issue awareness. + Process and Expedite Level 4 Documentation Ballots with operational teams. + Process and expedite Level 1 through Level 3 documentation ballots with operational teams. + Support Level 4 Documentation TPM with executing and expediting reviews and input, as requested. + Perform 6s each shift + Engage in process optimization to allow success of production/quality goals while achieving and maintaining cost savings + Complete all training within the expected time given **Qualifications You Must Have:** + HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline + Minimum of 1 year of relevant work experience **Qualifications We Prefer:** + Experience in manufacturing environment + Quality assurance or quality control experience is a plus **What We Offer:** + Medical, dental, vision and life insurance + Short-term disability, long-term disability and parental leave + 401(k) match + Flexible spending accounts + Employee assistance program + Employee Scholar Program (No waiting period!) + Paid time off including: 3 weeks of vacation, 5 personal sick days, 3 unpaid days for unique situations at supervisor discretion, and 12 paid government holidays **What is my role type?** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Quality Control Tech: The QC Tech works in a production setting ensuring product quality at various stages of processing. Testing product samples is performed using various types of lab equipment. The ability to multi-task and complete testing in a timely manner is essential in order to expedite production. Our QC Tech "Pay for Skills Program" is a defined career path that provides opportunity to advance in your position and increase compensation based on skill level. To find out more apply today! Preferred Skills: Quality Control experience is an ISO environment Good math skills. Self-motivated with attention to detail. Excellent communication skills. Accurately enter and retrieve computer data. Ability to solve problems in a team environment. Willing to work overtime as required. Job Type: Full-time Pay: $13.50 - $15.50 per hour. This position is bonus eligible. Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: 401(k) matching Employee Stock Purchase Plan Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Pension Schedule: 8-hour shift 1st Shift Monday - Friday,6 am-2:30 pm 2nd Shift, Monday - Friday, 2 pm- 10:30 pm 3rd Shift, Sunday-Thursday, 10 pm- 6:30 am TCI is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

Quality Control Tech: The QC Tech works in a production setting ensuring product quality at various stages of processing. Testing product samples is performed using various types of lab equipment. The ability to multi-task and complete testing in a timely manner is essential in order to expedite production. Our QC Tech "Pay for Skills Program" is a defined career path that provides opportunity to advance in your position and increase compensation based on skill level. To find out more apply today! Preferred Skills: Quality Control experience is an ISO environment Good math skills. Self-motivated with attention to detail. Excellent communication skills. Accurately enter and retrieve computer data. Ability to solve problems in a team environment. Willing to work overtime as required. Job Type: Full-time Pay: $13.50 - $15.50 per hour. This position is bonus eligible. Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: 401(k) matching Employee Stock Purchase Plan Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Pension Schedule: 8-hour shift 1st Shift Monday - Friday,6 am-2:30 pm 2nd Shift, Monday - Friday, 2 pm- 10:30 pm 3rd Shift, Sunday-Thursday, 10 pm- 6:30 am TCI is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

Details** Information **Requisition Number** Stu04347P **Home Org Name** Entomology and Plant Pathology **Division Name** College of Agriculture Title** Bee Lab Technician Title)** Most work will occur in the field under typical (hot and humid) Alabama conditions; some laboratory work is also expected **Essential Functions** + Traveling to field sites around Alabama + Assist w/ native bee field work including setting up insect traps & sweep netting + Processing insect specimens for pinning + Assisting w/ outreach events + Collecting/Entering data into spreadsheets + Assist w/beekeeping tasks such as hive management + Honeybee box building & maintenance + Research related tasks + Assist w/outreach events + Collecting/Entering data into spreadsheets **Why Work at Auburn?** + **Life-Changing Impact** : Our work changes lives through research, instruction, and outreach, making a lasting impact on our students, our communities, and the world. + **Culture of Excellence** : We are committed to leveraging our strengths, resources, collaboration, and innovation as a top employer in higher education. + **We're Here for You** : Auburn offers generous benefits, educational opportunities, and a culture of support and work/life balance. + **Sweet Home Alabama** : The Auburn/Opelika area offers southern charm, vibrant downtown scenes, top-ranked schools, and easy access to Atlanta, Birmingham, and the Gulf of Mexico beaches. + **A Place for Everyone** : Auburn is committed to fostering an environment where all faculty, staff, and students are welcomed, valued, respected, and engaged. Ready to lead and shape the future of higher education? Apply today! War Eagle! **Minimum Qualifications** + Enrolled student at Auburn University + Interest in Entomology or related discipline + Valid U.S. Driver's License + Ability to work outside for long periods + Ability to work independently and as part of a team **Preferred Qualifications** Experience in insect collection, beehives, bee collecting and data entry **Pay Rate** $11.00/hour **Work Hours** 20 **City position is located in:** Auburn **State position is located:** Alabama Posting Detail Information **Posting Date** 04/30/2025 **Closing Date** **Equal Opportunity Compliance Statement** It is our policy to provide equal employment and education opportunities for all individuals without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, gender expression, pregnancy, age, disability, protected veteran status, genetic information, or any other classification protected by applicable law. The Office of Equal Opportunity Compliance (EOC ) strives to ensure an inclusive and equitable working, living, and learning environment for members of the Auburn University community. Please visit theirwebsite (******************************************* to learn more. **Special Instructions to Applicants** Please ensure to include CV and a one-page cover letter describing your relevant experience, research interests, and position preference, only complete applications will be considered. **Quick Link for Internal Postings** ******************************************* **Documents Needed to Apply** **Required Documents** 1. Resume 2. Cover Letter **Optional Documents** 1. Curriculum Vitae