Quality control technician jobs in Elk Grove, CA

"All candidates must be directly contracted by ASK Consulting on their payroll and cannot be subcontracted. We are unable to provide sponsorship at this moment". Job Title: QC Associate I Duration: 6 Months Pay rate: $25-$27.93/hr on W2 AI Job description: Summary: With limited supervision, QC Associate I, is responsible for the performance of direct materials testing in accordance with cGMP regulations. These duties include execution of laboratory testing, trend analysis, documentation review, support of discrepancies (OOS, OOT, OOE) and other laboratory support activities. In conjunction with Quality Control leadership, the QC Associate II works to meet departmental and organizational goals. Job Requirements: B.S./B.A. degree and 1-3 years experience or Masters Degree plus one year experience or an equivalent combination of education and experience. Degrees are preferably in relevant scientific disciplines and experience is in the pharmaceutical or biopharmaceutical industry. Strong verbal and written communication skills, ability to organize and present information both formally and informally. Demonstrated ability to apply knowledge of scientific theories, principles, and techniques used in analytical or biological test procedures. Routinely exercises sound judgment, reasoning and problem solving. Capable of working under limited supervision and determining own short term priorities. Job Responsibilities: Perform a broad variety of basic and moderately complex tests with documentation according to GMP Review data and assess against established acceptance criteria Perform technical review of peer-generated data Evaluate data to identify trends and/or establish limits Identify discrepancies; provide input to design of quality investigations and CAPA (corrective actions preventive actions) initiatives as needed Identify and troubleshoot technical problems Identify gaps in systems and procedures Receive and provide training Participate in assay transfer and assay validation Perform equipment qualification / maintenance Prepare and maintain standards, controls, stocks, cultures, etc. per established procedures Support the maintenance and compliance of operational areas Assure and apply GMP throughout operations Coordinate with customers to support multi-site operational activities Support internal and external audits and regulatory inspections Works to meet schedules, timelines, deadlines Participate in and/or lead group and project teamwork; project and process improvements Write protocols and reports under limited supervision Meets scheduled performance of 95% on time Perform other duties as requested by managers to support Quality activities About ASK: ASK Consulting is an award-winning technology and professional services recruiting firm servicing Fortune 500 organizations nationally. With 5 nationwide offices, two global delivery centers, and employees in 42 states-ASK Consulting connects people with amazing opportunities ASK Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all associates.

•Assist with laboratory testing to help diagnose various pet and other animal illnesses, injuries, and diseases; process specimens; help with a variety of laboratory tasks • Assist with lab inventory, procuring supplies, and stocking shelves. *Assist with moving samples around the lab, loading analyzers, and general lab maintenance and cleanliness • Support and maintain various processes, systems, and databases. • Perform recordkeeping ad data collection • Perform administrative duties such as answering phones and preparing parcel deliveries, files requisitions, and performs duties in support of billing, pricing, and sample transportation. What You Need to Succeed: • Ability to read and interpret documents such as safety rules, standard operating procedures (SOPs), material safety data sheets (MSDSs), operating and maintenance instructions, government rules and technical procedures. • Ability to prioritize and multi-task • Strong initiative and follow through • Attention to detail • Ability to work independently and as a team contributor • Must demonstrate a high level of customer service • Good computer skills: Microsoft Office and SAP preferred • You meet the physical requirements that go with working as a Lab Associate - May transport hazardous waste within the facility and may occasionally lift and move up to 25 pounds.

Performs any combination of the essential duties and responsibilities of quality control at manufacturing facility in Dixon, CA. Successful candidates will be required to participate in a pre-employment drug screen and random drug screening per our Drug Free Workplace policy. Dependability for work schedule is crucial. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Inspects cast floats, float assemblies, and metal fabrications, hardware components, and lumber; * Inspects the casting process per drawing requirements; * Performs concrete tests per ACI / PCI and customer specifications; * Scans production and inspection documents; * Conducts safety tasks and inspections as required by The BMI Safety Program; and * Documents and records QC activities. * Performs other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or equivalent required. Requires knowledge of or ability to learn the characteristics of concrete float fabrication with 12 months of experience working with concrete and/or prior inspection. Requires one year of experience in Quality Control. CERTIFICATES, LICENSES, REGISTRATIONS: ACI concrete field testing tech Grade 1 Certification. Possess or ability to obtain PCI Quality Control Technician Levels 1 and 2 within 12months of hire. Ability to read production drawings. COMPUTER SKILLS: To perform this job successfully, an individual should be proficient with MS Word, MS Excel, and MS Outlook. Must be able to use a document scanner.

Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $4 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's-Infinite Possibilities. One Family. Purpose Statement The full-time position is scheduled for Monday through Friday, 4:00 PM to 12:30 AM. Performs the activities related to microbiological, analytical, performance and sensory evaluation using established methods and procedures. Understands, trains in and enforces SQF Global Standards for Food Safety including but not limited to formula control, data integrity, HACCP, GMPs, process monitoring, communication, document control, customer specifications, regulatory, quality and reliability standards. Key Accountabilities and Outcomes * Observe processes and work closely with plant personnel and corporate R&D to develop and maintain detailed and accurate plant floor work instructions for formulas and product specifications. * Verifies that process controls, weight control, HACCP and finished product specifications are adhered to by regularly auditing procedures and paperwork daily. * Assist R&D personnel to test and commercialize new products or changes to existing products, collect and send process data and product samples. * Demonstrate high moral character and ethics. Adheres to company codes of conduct and does not engage in gossip or workplace drama. * Initiates holds of ingredients or finished products that do not meet Rich's product safety or quality requirements. * Keeps informed of latest manufacturing technologies, systems, and quality control practices. Maintains a comprehensive understanding of all products manufactured by the plant as well as the raw materials, packaging materials, and operations required in the manufacturing process including quality specifications and standards. * Participates in QA/TPM meetings to discuss quality and sanitation issues and opportunities for continuous improvement. * Participate in documentation of SQF element reviews. Assembles, reviews and files daily production paperwork. * Act as backup to Quality Floor Technician for vacation and weekend coverage on a regular basis. Knowledge, Skills, and Experience * Degree in Biology, Food Science, Food Technology or related field. * Demonstrated knowledge and application of quality assurance techniques and tools and quality management principles in a food manufacturing environment. * Demonstrated knowledge of efficient and safe manufacturing operations to include GMPs, HACCP, product and associate safety, and product quality. * Demonstrated ability to train associates as well as plan, monitor and schedule tasks and projects * Demonstrated ability to analyze and resolve problems. * Demonstrated ability to formulate and understand basic statistical analysis. * Proficient and learning capability in using Microsoft Word, Excel, Outlook, Minitab, and SAP. * Willingness to work weekends and overtime when required. * Capable of being certified in HACCP, PCQI, and as an SQF Practitioner. COMPENSATION In accordance with state law, the rate or range provided is Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), reasonable estimate of the base compensation for this role. The actual amount may be higher or lower, based on non-discriminatory factors such as experience, knowledge, skills, abilities, shift differential, and location. Hourly Rate $30.60 - $30.60 plus shift differential as applicable Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), are committed to a policy of Equal Employment Opportunity, standing up for fairness and maintaining a culture of belonging, to provide an exceptional experience for all. We will not discriminate against an applicant or employee on the basis of race, color, religion, sex, national origin, disability, military or veteran status, or any other Federal or State legally protected classes. The information collected by this application is solely to determine suitability for employment, verify identity, and maintain employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Rich's. Please contact Rich's Associate Experience Network at *************** if you need assistance completing this application or to otherwise participate in the application process. BRINGING YOUR BEST SELF TO WORK. As a family-owned company, caring for our associates-their whole selves-is a top priority. That's why we provide benefits and tools to help our people balance the integration of work and life: * Competitive compensation * Health & financial benefits * Paid time off * Parental leave * Family planning support * Flexible work policy * Associate resource groups * Volunteering & community impact opportunities * Holiday gatherings * In-house taste tests (we are a food company after all)! It's all part of how we support our family of associates. Because in the company of family, all things are possible. MEET RICH'S. Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $3.8 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's-Infinite Possibilities. One Family. Nearest Major Market: Stockton Job Segment: Document Control, Administrative

Job Details Dynatect Ro-Lab - Tracy, CA Dynatect Ro-Lab - Tracy, CA Full Time High School $25.00 - $25.00 Hourly QA - Quality ControlDescription INFORMATION Department: Quality Reports to: Quality Manager Work Hours: Full-Time (approx. 40-hour workweek, Shift 1 or 2) FLSA Status NON-EXEMPT DESCRIPTION: The Quality Technician is responsible for performing required inspections of vendor supplied and Dynatect manufactured parts. These inspections are performed using criteria from applicable drawings, standards, specifications, and any other internal or external specified requirements. The Quality Technician is responsible for communicating with respective departments, vendors and individual employees to troubleshoot quality and process related issues. Additionally, the Quality Technician will be responsible for assisting and finding solutions to assigned internal and external complaints and corrective actions, and for assistance with identifying material and process non-conformances. The Quality Technician will also assist with continuous improvement projects that mitigate risk and ensure a quality product is delivered to the customer. PRIMARY RESPONSIBILITIES: Work in a safe and courteous manner. Perform product inspections. Perform calibration activities. Assist with resolving material and process non-conformities. Assist with continuous improvement activities. Promote and encourage a quality mindset in other employees. Attend Quality team meetings as scheduled. SECONDARY RESPONSIBILITIES: Perform other duties as assigned. SUPERVISORY RESPONSIBILITIES: None. Qualifications SKILLS AND ABILITIES Ability to keep accurate records. Be able to multi-task in a fast-paced environment. KNOWLEDGE AND EXPERIENCE Minimum of 3 years' experience in a manufacturing environment. Familiar with quality control and data analysis. Ability to follow documented procedures and standards. Proficient in Microsoft Office. Familiar with measurement equipment and its functionality.

About Applied Aerospace: Join the team that builds for the best. At Applied Aerospace, we design, fabricate, and test mission-critical aerospace components for leading innovators like SpaceX, NASA, Northrop Grumman, and Boeing. Every part we create reflects our relentless commitment to quality, reliability, and performance. Through precision engineering and purpose-driven innovation, we're helping take aerospace technology to new heights - and we're looking for talented individuals who want to be part of that journey. OVERVIEW OF POSITION: Our company is currently seeking a dedicated and detail-oriented Quality Inspector to join our team. As a Quality Inspector, you will be responsible for conducting in-process inspections using hand inspection tools such as micrometers, calipers, height gauges, and other measurement equipment. Your primary role will be to ensure that our products meet the highest quality standards before they move forward in the production process. ESSENTIAL JOB FUNCTIONS: * Perform in-process inspections using various hand inspection tools, including micrometers, calipers, height gauges, etc. * Follow work instructions and inspection guidelines to accurately assess product quality. * Pay meticulous attention to detail, identifying any defects, deviations, or non-conformances during inspections. * Read and interpret Mylar's and blueprints to verify product dimensions and specifications. * Collaborate with production teams to address and resolve any quality issues that may arise. * Assist in reporting non-conformances and documenting inspection results accurately. * Continuously learn and adapt to new inspection techniques, tools, and technologies. * Maintain a clean and organized work area. * Perform thorough examinations of all materials and finished products. * Implement and improve quality control operating procedures. * Identify and troubleshoot equipment problems and defects. * Other job duties as assigned. GENERAL: * Associate level should have 2-5 years' experience in Quality. * General level should have a total of 5+ years' experience in Quality. * Senior level should have a total of 10+ years' experience in Quality. * High school diploma or equivalent. * Proven experience as a Quality Inspector or in a similar role, preferably in a manufacturing environment. * Proficient in using hand inspection tools such as micrometers, calipers, height gauges, and other measurement equipment. * Excellent attention to detail and ability to identify defects and non-conformances. * Strong communication skills and ability to collaborate effectively with cross-functional teams. * Familiarity with quality control processes and standards. * Basic computer skills for documenting inspection results. * Ability to work independently and prioritize tasks effectively. * Willingness to learn and adapt to new technologies and inspection methods * Strong attention to detail. * Strong analytical and critical thinking skills. * Excellent written and verbal communication skills. * Previous experience in a manufacturing or production environment. * Knowledge of quality management systems. * Familiarity with ISO standards. * Ability to read and interpret Mylar's and blueprints. * Experience with non-conformance reporting. This job description is not intended to be all-inclusive. Employees may perform other related duties as assigned to meet the ongoing needs of the Company. Applied Aerospace is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Applied Aerospace is committed to working with and providing reasonable accommodation to individuals with disabilities or individuals who may need religious or medical accommodation. If you need accommodation because of a disability, medical, or religious reason for any part of the employment process you can notify the Human Resources Department, and your request will be reviewed.

Quality Control Technician needs 2+ years of work experience in a professional, manufacturing, or laboratory setting Quality Control Technician requires: High school diploma or GED 2+ years of work experience in a professional, manufacturing, or laboratory setting Basic math skills Clear and effective oral and written communication with a small team within a large company Ability to work independently and to take directions based on circumstances Computer literacy in Microsoft Office Suite Be able to safely work with chemicals in a laboratory and manufacturing environment Preferred: Associates degree in sciences or some college coursework Knowledge of basic laboratory practices Physical Requirements: Must be able to lift up to 50 lbs. Must be able to stand for long periods of time Quality Control Technician duties: Operate analytical instruments to perform quality control testing of liquid 3D printing resin according to standard, including: o Digital Light Processing (DLP) 3D printing. Color and ultraviolet spectrophotometry. Rheology. ASTM methods D790, D412, D638, D7867 Calculate and report test results using Albert and SAP software for the completion of quality tasks Communicate with product development, engineering, and production personnel to make batch adjustments as needed Use good manufacturing practices to maintain clean working environments such as lab benches, fume hoods, and ovens. Monitor equipment performance by completing routine standards checks Perform incoming inspections of raw materials shipments and property data File, maintain, and appropriately dispose of raw material, quality retain, and finished product inventories Comply with weekly 5S standards including sweeping, mopping, organizing, and trash removal. Ensure end to end sample and product traceability Complete other miscellaneous responsibilities within the Quality Department as assigned by department manager

Job Type: Temp to Hire Pay Rate: $24-$28/hour Schedule: Monday - Friday; 7am-3:30pm Description of Position:Do you have experience in Quality Control working as a Lab Technician? We are seeking a hands-on, detail oriented Quality Control Lab Technician to support Quality Control and Technical Service activities for both existing and new products. This role is ideal for someone who enjoys a dynamic, physical, and technically engaging environment. For the right person, this position will become permanent. This job requires performing manual tasks such as sanding and operating testing/machining equipment. Candidates must be comfortable being on their feet for most of the shift and lifting up to 40 lbs. Job Responsibilities: Maintain quality standards through routine physical, chemical, and mechanical testing Complete accurate and clear documentation for all tests and analyses Lay up and machine composite materials Operate analytical and mechanical testing equipment Update logs, reports, and equipment documentation to ensure compliance with product specifications Communicate equipment or testing issues to lab personnel and supervisors Description of Company:You will be supporting a well established specialty high performance aerospace material company in Benicia, California. Experience Required: High school diploma required Some college-level science lab experience preferred (not required) Mechanical aptitude and comfort using tools and machinery Ability to lift up to 40 lbs Ability to perform hands-on, manual tasks such as sanding and equipment operation Willingness to be trained on the job Similar Position:Laboratory TechnicianAnalytical SpecialistResearch and Development TechnicianManufacturing Technician Bolt Staffing is an equal opportunity employer. Applicants of all backgrounds are encouraged to apply. We understand that you might not meet every requirement for this position, but we encourage you to apply even if you do not "Check all the boxes." For inquiries about this position or to explore other job opportunities at Bolt, feel free to contact us at the following numbers: Stockton - (209) 307-6115 American Canyon - (707) 552-7800 Sonoma - (707) 939-2800

JOB SCOPE: The Quality Control Technician's overall responsibility, and objective, is to ensure that all aspects of the SQF, Quality, and Food Safety Programs are followed by all employees, vendors, visitors, etc. Work Environment: Graveyard Schedule 6pm - 6:25am 12hr Shifts (Alternative Work Schedule Including Weekends) Training will be conducted on day shift then moved to nights ESSENTIAL DUTIES AND RESPONSIBILITIES: • Routinely check operator paperwork for accuracy and completeness. • Assure checks are documented clearly, cross referenced and traceable. Communicate results of routine QA tests to production personnel. Notify supervisory personnel and Quality Control and Food Safety Manager of product quality or plant conditions which may have a negative impact on product quality and work together to correct the situation. • In the case of finished product, perform follow-up testing until situation is corrected and product disposition is resolved in a quality conscious manner. • As directed and trained, conduct various tests for incoming ingredients, including sieve, NIR, moisture, and mycotoxin testing. • Maintain and report hold/reject product and assure its proper disposition. • Collect routine ingredient and finished product samples, as required (detailed in QA Manual). • Train and educate all personnel on quality and food safety practices. • Promptly respond to calls for assistance clearly communicating and ETA of arrival. • Promptly respond to quality/food safety concerns, following up as needed. • Follow First In First Out (FIFO) and enforcing other departments to follow the same process. • Continuously work with and/or assist production, maintenance, and sanitation personnel as needed throughout the shift. • Maintain a clean work environment and stock supplies as needed for next shift. • Ensure, and hold accountable, all personnel, visitors, vendors, etc. comply with all Standard Operating Procedures (SOPs) in addition to all SQF, Quality, and Food Safety Programs. • Maintain accurate, complete, and legible paperwork. QUALIFICATIONS, EDUCATION & EXPERIENCE REQUIRED: • Must successfully pass a pre-employment drug test, physical (physical, lifting, hearing, and vision), and background check. • Minimum of 2-year experience in a Quality Control position preferred. • AA Degree in a related field would be accepted in lieu of experience. • Skilled in computer work involving Microsoft Office. Must successfully pass a pre-employment background and drug screening.

Click Here to watch our Realistic Job Preview Video Position operates equipment that blends raw materials to create beverage products to exact specifications. Position is responsible for weighing, measuring, and mixing ingredients to standards. Performs routine tests to ensure resulting mixture meets specified properties and consistencies. Performs periodic sampling of products as they are being bottled/canned to ensure continuous meeting of standards including product quality, fill levels, labeling, freshness dating, and container integrity. Records test data and communicates modifications to the manufacturing process to eliminate any irregularities. May be required to periodically deep clean and sanitize blending/filling equipment and production lines. This job may require lifting/carrying cases weighing 20-45 pounds repeatedly over 10-12 hour period and continuous standing and walking, manipulating and handling product samples while sitting. PRIMARY ACCOUNTABILITIES: * Operate and monitor production line(s) to ensure efficiency * Remove or shift materials and/or finished products to facilitate proper flow * Perform tests and use special equipment to ensure package and product quality * Operate all manufacturing equipment efficiently and safely * Clean equipment and area during and after shift * Maintain clean work area through good housekeeping practices * Follow process guidelines and expedite quality concerns to management * Work with production/maintenance as necessary * Keep daily records tests performed and results * Regular, reliable, predictable attendance

Detail-Oriented Mindset: A passion for accuracy in video reviews, data entry, and mapping tasks. Technical Proficiency: Experience with CAD software, PDF editing tools, and video analysis tools is highly preferred. Ability to clearly and professionally communicate with internal teams and clients. Time management: Ability to handle multiple projects and prioritize effectively. Preferred Experience: Background in knowledge of Unearth, utility inspections, mapping, or CAD-based roles is a plus.

Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? * Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. * Innovation: Be a part of a team that's shaping the future of construction and infrastructure. * Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. * Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: * Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment * Read and understand shop fabrication drawings and specs and verify dimensions of product or material * Perform internal audits and maintain quality control inspection records * Act as liaison to outside inspectors * Resolve quality issues due to production and fabrication errors * Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC experience preferred. * Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. * Ability to interpret readings from Micrometers, Calipers, and other QC tools. * Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

Job DescriptionDescription: Quality Control Technician Full-time | Permanent Hourly | Day Shift $29.50- $35.00 *We are not currently working with third party agencies on this role. About Us: Vander-Bend is a U.S.-based manufacturer dedicated to building the precision infrastructure that powers tomorrow's AI. Our expertise in server racking and power delivery solutions provides the backbone for next-generation data centers, enabling hyperscalers and integrators to innovate and scale globally. With a focus on trusted, domestic manufacturing, we deliver quality, speed, and innovation at scale-redefining AI infrastructure for the future. We are a newly created division of Vantedge Medical, the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. With a steadfast commitment to advancing technology, we take immense pride in the work we do - and have a lot of fun doing it. About this Opportunity: This position is a high level non-supervisory QC position, combining all the skills of an inspector 2 plus the additional computer and process development skills needed to improve the overall functioning of the quality department. Responsibilities: Supports all inspection processes including but not limited to creating and checking documentation packages such as First Article reports and SPC reports Development and documentation of inspection processes to improve inspection speed and/or accuracy Database programming and development in support of records automation Other process automation Communicate effectively with internal teams, operations staff, and leadership Work with internal and external teams to address quality issues and implement corrective actions Requirements: Education and Experience This position requires a minimum of 5 years' previous Inspection experience in a metal fabrication environment, at least 2 of which must have been at the Inspector 2 level (applicable for internal applicants). However, depending on other factors such as education, programming certifications, high score on programming / measuring tools test a candidate with less experience may be considered for hire or promotion. Knowledge / Skills All knowledge and skills required for the Inspector 2 position, plus: Faro Arm, Database, or other inspection software expertise. Solidworks skills including complex 3D part creation

Requisition ID: 908918 Position: Full-Time Total Rewards: Benefits/Incentive Information If you've worn a pair of glasses, we've already met. We are a global leader in the design, manufacture, and distribution of ophthalmic lenses, frames, and sunglasses. We offer our industry stakeholders in over 150 countries access to a global platform of high-quality vision care products such as the Essilor brand, with Varilux, Crizal, Eyezen, Stellest and Transitions, iconic brands that consumers love such as Ray-Ban, Oakley, Persol and Oliver Peoples, as well as a network that offers consumers high-quality vision care and best-in-class shopping experiences such as Sunglass Hut, LensCrafters, and Target Optical, and leading e-commerce platforms. Our unique business model and relentless pursuit of operational excellence ensures that consumers everywhere have access to products. Balancing speed, efficiency and proximity, the Company manages a global supply chain with cutting-edge technology, based on centralization for frames and on a capillary network for lens finishing and prescription laboratories. In our dynamic environment, fueled by technology and innovation, our people have the space to pioneer new solutions. Join our global community of over 200,000 dedicated employees around the world in driving the transformation of the eyewear and eyecare industry. Discover more by following us on LinkedIn!GENERAL FUNCTION This role supports the EssilorLuxottica mission of See More Be More by working closely with the Lab Leadership in providing guidance, coaching, and training to lab employees. The Order Quality Tech I is responsible for monitoring, auditing, and facilitating the smooth flow of internal and external lab orders using multiple systems, including Spotfire, Optifacts, and Excel. This role supports quality assurance, resolves order delays, and ensures all steps in the production process are followed accurately and efficiently. MAJOR DUTIES AND RESPONSIBILITIES- Lead continuous improvement initiatives to ensure consistent implementation of procedures. Keep yourself and team up to date on all current processes, optical knowledge, and products available Provide coaching, detailed training, and follow-up to employees on all tasks in accordance with standard operating procedures. Lead daily documented team meetings with action plans and follow-up. Communicate and provide input to Department Supervisor for purposes of coaching and training needed for any employees not conforming to performance, job requirements, department rules and or behavior-related issues. Perform regular documented audits within department to ensure that correct procedures are being followed and machines are properly calibrated. Immediately document and post any changes to SOP's Lead initiatives/projects throughout the lab to improve process flow, through put, and overall lab performance Flexibly support other departments as required by business need Internal Order Monitoring Audit reports for delayed or stuck orders (e.g., Outsource >48hrs, Stuck @ Local Station >24hrs) Reorder or escalate issues for missing frames, tint samples, or backordered lenses Ensure lenses and frames are ready for processing; initiate See4C tickets for lost/missing items External Order Monitoring Monitor aging orders (D+4 & older) and resolve issues preventing progression Validate frame receipt status; coordinate customer communication for missing items Investigate outsourced order cancellations and reroute as needed Correct pricing issues and ensure proper order invoicing Quality Assurance Review lab redo and multiple breakages to ensure readiness for reprocessing Conduct double inspections for flagged accounts and apply release codes if passed Manage 30-day+ aging orders and initiate action for missing items or customer contact Validate damaged frame returns and process frame credits accurately BASIC QUALIFICATIONS A high school diploma or equivalent High mechanical / technical aptitude 1+ years of related work experience in Manufacturing (optical preferred) The ability to meet measurable standards in a dynamic production environment Strong proficiency in Excel, Spotfire, and order-tracking systems like Optifacts Excellent attention to detail, organizational, and problem-solving skills Ability to work collaboratively across departments and communicate effectively Employee pay is determined by multiple factors, including geography, experience, qualifications, skills and local minimum wage requirements. In addition, you may also be offered a competitive bonus and/or commission plan, which complements a first-class total rewards package. Benefits may include health care, retirement savings, paid time off/vacation, and various employee discounts. EssilorLuxottica complies with all applicable laws related to the application and hiring process. If you would like to provide feedback regarding an active job posting, or if you are an individual with a disability who would like to request a reasonable accommodation, please call the EssilorLuxottica SpeakUp Hotline at ************ (be sure to provide your name, job id number, and contact information so that we may follow up in a timely manner) or email ********************************. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, national origin, social origin, social condition, being perceived as a victim of domestic violence, sexual aggression or stalking, religion, age, disability, sexual orientation, gender identity or expression, citizenship, ancestry, veteran or military status, marital status, pregnancy (including unlawful discrimination on the basis of a legally protected pregnancy or maternity leave), genetic information or any other characteristics protected by law. Native Americans in the US receive preference in accordance with Tribal Law. .job Title{ display:none !important; } Nearest Major Market: Sacramento Job Segment: Supply Chain, Supply, Social Media, Ophthalmic, Operations, Marketing, Healthcare

Quality Control Technician: Sauna Want to join one of the hottest health and wellness startups in the country? Well, PLUNGE is looking for just the right person to take our team to the next level. Overview of Role The role will report to Quality Management and support all production and warehouse processes. This role will be involved in a variety of manufacturing, testing, kitting, and packaging operations in a dynamic and proactive work environment. This position will become an active part of a quickly growing team! This role will be located at our Lincoln, CA location. Key Responsibilities Inspect pre-cut/pre-assembled in coming raw materials (beams, frames, electrical wire, wood moisture content). Inspect individual sauna pieces during build for dimensional accuracy and aesthetic flaws. Test electronic heaters and lights for the sauna. Inspect completed sauna and verify that the fit and finish of all pieces together align with our quality standard. Inspect the crated sauna and verify all pieces are included, undamaged, and placed properly to prevent damage during shipment. Document wood shop products (saunas, showers, shipping crates) with photographs. Our Ideal Candidate Experience with woodworking and carpentry processes High attention to detail Experience working with a variety of different teams and departments Experience working in Quality or Manufacturing Operations Proposes new ideas and thoroughly investigates issues Proactively embraces changes and promotes continuous improvement Benefits, Perks, Time Off Comprehensive health insurance: Medical, dental, and vision. Shared cost. Life/ADD, STD, and LTD benefits. 401K plans with a 3% match after 6 months. Perks 1 free monthly float at Capical FLoats in Sacramento or Auburn Health reimbursement for gym, supplements or other health expenses Get Paid to Plunge bonus Monthly catered lunches with live DJ and raffle prizes. Reimbursement for participating in the Landmark Forum. *Conditions apply.

3rd Shift QC Lab Tech needs 4 years experience QC Lab Tech requires: 10p-630a Tues-Sat High school diploma/GED and experience working in a chemical laboratory preferred. PC proficiency in Microsoft Office products, specifically excel tabling and charting, SAP, and other database experience preferred. Familiar with analytical equipment, wet chemistry techniques, and/or mechanical testing apparatuses. Strong work ethic, self-motivated and ability to drive projects to desired results. Ability to work on requested shift. Training rotations may occur on a different shift than the application states, and can take 1-3 months to complete. QC Lab Tech duties: Complies with all Safety, Health, and Environmental rules, procedures and regulations. Conducts all laboratory work in a safe manner including the use of proper Personal Protective Equipment (PPE), adherence to the site safety practices, use of lab equipment, 5S, etc Perform all work in strict adherence to QC standard laboratory procedures (SLPs). Reviews and provides recommended improvements to QC standard laboratory procedures (SLPs). Inspection and testing of incoming raw materials, semi-finished goods, and finished goods according to defined instructions, procedures and methods. Executes lab testing and generates test data, documentation and lab reports. Communicates basic observations regarding data and/or experimental outcome. Provides support for projects assigned by Engineers and/or Supervisors. Assists in maintaining project timelines. Employs basic problem-solving skills to overcome project bottlenecks and maintain project deliverable dates

Full-time Description To assist in Inspection Lab activities allowing it to perform seamlessly while providing accurate, repeatable measurement results that fully support the needs of our internal and external Customers Requirements 1) Working with peers to help coordinate and schedule Inspection Lab functions so all requirements are accomplished in the most efficient manner possible. 2) Perform first piece, in-process, and final inspections and document as required 3) Program and operate the CMM & Faro Arm 4) Crosstrain on all lab equipment to have a functional knowledge and operational ability of the equipment listed above 5) Be a subject matter expert on the use of all conventional measuring equipment, ability to design and develop specialty gauging, along with a highly developed understanding of GD&T 6) Work with the QA Manager and Quality Engineer and other Inspectors to perform capability studies, Gauge R&R studies, and other statistical techniques. 7) Supply the necessary data for AS9102 and PPAP submissions. 8) Assist in calibration activities to ensure all are accomplished as scheduled Research, and suggest upgrades/alternatives/additions to the existing lab equipment while also justifying the procurement by demonstrating the appropriate ROI

Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Up to $30,000 Sign-On bonus based on experience Welcome to Doctors Medical Center Modesto! Doctors Medical Center Modesto is a full-service, comprehensive health care facility, dedicated to providing the finest medical care for the community. From preventative and diagnostic services to expertise in some of the world's leading technologies, DMC's multidisciplinary team of physicians and healthcare professionals is dedicated to your good health and well-being. Recognized for innovative cardiac and neonatal intensive care to advanced stroke and trauma treatment, the outstanding doctors at DMC represent most major medical specialties and are committed to being there for you, when you need them most. We offer competitive salaries and benefits including a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Relocation package offered for this position ************************* Job Summary: Reporting to the Director of Imaging Services and/or designee, the Diagnostic Imaging Technologist is responsible for radiological care to patients of all ages, for the purpose of diagnosis and/or treatment of anatomical and physiologic disorders using ionizing radiation. Must have working knowledge of conventional Radiology. Must be able to operate all X-ray equipment and PACS. Prepares exam room, equipment, supplies and medications for patient's procedures and is responsible for patient education. Proven competency in addition to conventional radiography, working knowledge in at least one other area CT, MRI, or Interventional Radiology if applicable competencies are met. May be required to take call. Sign on bonus doesn't apply to internal applicants BLS ARRT( R ) CRT Fluoroscopy permit required #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Training period is 1st shift and then need to be flexible to work on different shifts- Quality Control Technician with minimum of 2 years experience as a Lab Technician. Quality Control Technician requires: High School graduate and two years of college chemistry or related science courses Demonstrated proficiency at routine mathematics, which includes addition, subtraction, multiplication and division. manipulation including mixing equipment, lab glassware, testing machines, and other standard lab tool computer skills to manipulate and graph data and report experimental work Quality Control Technician duties are: Analyzes and interprets test results and determines acceptability Records time spent against work orders Must follow all applicable policies, procedures and guidelines. This includes the safe and proper operation of any/all applicable machinery and equipment Additional Information $22/hr 6 months