Quality control technician jobs in Goshen, IN - 189 jobs

Quality Technician | The Shyft Group (FVS) | Bristol, IN (Main) Regular Employee | Hourly Non-Exempt | $28.00 - 28.00 What you'll do: The Quality Technician position is responsible for ensuring that the product meets customer's requirements (both internal and external) at each stage of its manufacturing process, carrying out relevant testing and where necessary take corrective action to rectify non-conformance issues. Report quality issues data, ensuring the Quality Management System is adhered to at all stages. * Promote the expectation that team members will consider the impact of their work/actions on others and make deliberate decisions to act in ways which prevent rework or constraints on the process. * The Quality Technician is a coach, cheerleader, and player on the team * Facilitate creation of systems and processes which enhance the team's ability to meet customer expectations (identification of standards, creating of buy/sell agreements, audit processes, etc.) * Act as mediator when needed to clarify customer expectations or interpret standards * Perform Pre-Delivery Inspections of completed vehicles * Perform data entry, analysis, and sharing/explanation of same * Generate reports * Perform audits of new and existing processes * Document writing, control, and management * Facilitate/Participate in Root Cause Analysis, Design Failure Mode and Effects Analysis, Production Failure Mode and Effects Analysis, Practical Problem Solving, etc. • Initiate non-conforming material documents for supplier quality issues * Assist in the execution of activities which promote continuous improvement and protect customers * Conduct training, information sharing and orientation sessions * Lead by example regarding safety and acting in the best interests of the team * Provide coverage for other technicians as needed * Any other duties as assigned by the Quality Manager What you need to be successful: * High School Diplomas or GED required (Associates degree and/or CQT certification preferred) * Minimum 2-3 years related Quality Manufacturing experience * Knowledge of/ability to acquire a thorough understanding of customer expectations and regulatory requirements * Excellent attendance * Positive attitude * Strong interpersonal skills * Ability to read relevant measuring equipment * Provide appropriate feedback and documentation of any defects * Strong and consistent attention to detail * Self-motivated with the ability to stay on task * Team oriented Able to: * Read and understand Engineering documents such as part prints, assembly drawings * Work overtime on short notice Be willing to: * Learn and rotate within all quality areas * Improve self / area / company (including pursuing additional training, if needed) * Develop a working knowledge of company's systems (example: AS/400, Sparcon) #TSG123 Why The Shyft Group? Our people are our greatest asset, and your success is our success! That's why we provide comprehensive benefits that support your health, financial security, and work-life balance-so you can thrive both personally and professionally. * Health & Wellness: Medical, Dental, Vision, HSA/FSA, Wellness Plan * Financial Security: 401(k) with match, Disability, Life Insurance * Work/Life & Growth: Educational Reimbursement, EAP, Dependent Care. At The Shyft Group, we don't just offer benefits-we invest in your well-being. Join us and experience the difference! Who we are: The Shyft Group is the North American leader in specialty vehicles, including last-mile delivery vans, work trucks, and motorhome chassis. Our 10 brands- Utilimaster, Blue Arc, Royal Truck Body, DuraMag, Magnum, Strobes-R-Us, Spartan RV Chassis, Red Diamond, Builtmore and Independent Truck Upfitters-are powered by 3,000+ team members across the U.S. and Canada. Backed by 50 years of innovation and a supportive, entrepreneurial culture, we're leading the way in electrification and proudly ranked among Fortune's 100 Fastest Growing Companies. Equal Employment Opportunity (EEO) The Shyft Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, genetic information, status as a protected veteran or status as a qualified Individual with a Disability, or any other characteristic protected by applicable federal, state or local law. If you have a disability and would like to request an accommodation in order to apply, please email us at *************************. The Shyft Group is an E-Verify Employer Shyft uses E-Verify, which is an online system operated by the U.S. Department of Homeland Security in partnership with the Social Security Administration to verify employment eligibility and validate social security numbers. Through participation in the E-Verify program, information entered on Form I-9 will be provided and compared to information available at both of these agencies. See posters for more details. E-Verify Notice U.S. Right to Work Notice.

JOIN OUR TEAM! HERE ARE JUST A FEW OF THE REASONS WHY YOU WILL LOVE IT HERE Generous Time Off - Generous time off policies - over 3 weeks off your first year Company Paid Premiums for Short and Long Term Disability 100% Company paid coverage for Life Insurance, Health Advocacy and Employee Assistance Program Health Care Coverage - Coverage for medical, dental and vision starts the 1 st of the month after 30 days with a Generous Company contribution to Health Savings Account for enrollees in HSA qualified medical plan Annual Merit Plus Other Pay Incentives Tuition Reimbursement Climate Controlled Facility The Quality Technician (QT) at CPI is responsible for the auditing, inspection and testing functions through-out the value stream. In addition, the QT is charged with following up on any process and/or product non-conformances to assure they are brought to an effective solution while assisting with troubleshooting and supporting operations as required. Schedule: Friday - Sunday 4:00am-4:00pm (plus an additional 16 hours of overtime during the week) Responsibilities Adhere to all requirements of the CPI Safety Program. Adhere to all CPI security requirements including counting and documenting the disposition of all cards to and from the operation. Adhere to all requirements of the CPI Quality Management System. Adhere to all requirements of the CPI Workmanship Manual. Willingness to work flexible hours as required. Reads and interprets the shop floor documents (proof, job ticket, combo ticket) and workmanship manual as well as applicable ISO, Association, and CPI internal specifications. Know where to locate standards in PowerDMS. Complete Quality Release testing process including physical testing and visual inspection. Sets up and performs destructive and nondestructive tests on materials or product to measure performance, life or material characteristics. Observe, report, and document quality data information on checklists and/or electronically, as required. Conducts inspections and recommends final disposition based on those results. Initiates product hold procedures as necessary. Verifies setups and completes in-process audits in Pressroom, Finishing and EMV. Coordinates with production supervision regarding completion of testing and in-process audits. Participate in continuous improvement teams and projects, if assigned. Complete incoming inspection process on received raw materials, if assigned. Identify, document, and communicate, as appropriate, quality information on the Shop Floor documents and other applicable quality forms. Assist with problem solving and trouble-shooting activities, as assigned. Assure proper rerun/rework paperwork is printed and required inspections are completed. Qualifications Basic computer skills. Ability to multi-task, communicate clearly with others, interact with several different departments throughout each shift. Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The candidate must have basic skills required to operate technical machinery. They must be able to use a caliper and other hand tools. The candidate must be able to interface with a PC by inputting and outputting data and using basic Microsoft Office Suite products. Keyboard input skills are necessary. College degree or some college education is desired but not required. Ability to read and comprehend simple instructions (written and verbal). Ability to write simple reports. Ability to effectively present in one-on-one and small group situations to other employees of the organization in English. Ability to add, subtract, multiply and divide into all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Quality experience preferred American Society for Quality, Certified Quality Auditor Certified is desired but not required. Elementary English proficiency communication skills necessary Physical Demands: Work is primarily conducted standing or walking in a manufacturing environment and sitting in an office environment and often requires bending and stooping to observe product and/or manufacturing equipment The manufacturing environment is noisy and may require ear protection Work involves good eyesight, hand/eye coordination, and excellent color vision to be able to ensure a quality product Work involves dealing with fine detail and constant human interaction, which can be tiring both mentally and physically On-call continuously and may be called back to the plant during off-duty hours Work is conducted in shifts and may require long hours, including weekends, to meet deadlines Position may require up to 10% travel Company Overview: CPI Card Group is a payment technology company and leading provider of credit, debit and prepaid solutions delivered physically, digitally and on-demand. CPI helps our customers foster connections and build their brands through innovative and reliable solutions, including financial payment cards, personalization and fulfillment, and Software-as-a-Service (SaaS) instant issuance. Learn more at ********************* Benefits: Competitive pay rates and an inclusive, empowering and rewarding culture. Solid benefits package including Medical, Dental, Vision, Long Term Disability, Short Term Disability, Life Insurance, Accident Insurance, Critical Illness Insurance, FSA, HSA, Vacation and Holiday Pay, Tuition Reimbursement and 401(k) with a competitive company match percentage. CPI is an Equal Opportunity Employer, including disability/vets. A complete background including drug screen is contingent upon hire.

Job DescriptionDescription: HOURS 3rd Shift = 11pm-7am Summary/Objective: The Quality Technician is primarily responsible for testing and inspecting products at various stages of the production process and complies and evaluates statistical data to determine and maintain quality and reliability of products. Essential Functions: The list of duties and responsibilities are not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. Completion and tracking of all capability studies, including statistical analysis Completion and tracking of all material testing (MITR) Perform tube lay-out analysis (TLA) Perform special investigations Perform receiving quality audits (RQA) Assist with projects as assigned by the Laboratory Supervisor Assist manufacturing with the interpretation of quality standards Continuous improvement projects as assigned by Department Supervisor and/or Department Manager Ra testing product/raw material Rockwell testing product/raw material Perform PPAP/ISIR studies Perform daily repair and calibration of all gauging within the facility Filing and recordkeeping for the laboratory Perform GR&R for all families of inspection, measuring and test equipment Address daily quality issues related to manufacturing for both facilities Maintain sample catalog/cabinet General lab housekeeping Daily recording of quality results of order verification checks during production runs (all mills) Provide technical service and support to all departments as needed Work Environment: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, outside weather conditions and vibration. The noise level in the work environment is usually moderate Physical Demands: While performing the duties of this job, the employee is regularly required to stand, walk, handle samples and reach with hands and arms. The employee frequently is required to talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Required Education: High school diploma or GED preferred Required Experience: Prefer (but not required) six months related job experience Requirements: Experience with office computer software required, including demonstrated experience with Microsoft Office Suite software packages such as: Outlook, Word, and Excel Effective analytical skills Effective verbal and written communication Effective interpersonal and customer service skills Effective organizational and prioritization skills Ability to be detail-oriented Ability to operate a variety of standard business machines such as: computer, keyboard, calculator, fax, and photocopier Ability to apply basic mathematical concepts and apply concepts such as fractions, ratios, percentages, and proportions to practical situations. Basic knowledge of statistics Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables

Overall Purpose: The Quality Technician plays a crucial role in ensuring the quality of raw materials, purchased components, and production parts throughout the production process. Serving as a representative of the quality department to both internal and external customers, the Quality Technician actively participates in continuous improvement efforts for the quality system. This position is essential for maintaining safety and quality standards, proper documentation, and the maintenance of equipment and gauges to support Masterbilt's business goals and objectives. Requirements Essential Job Functions & Expected Outcomes: Quality Assurance: Inspect incoming materials and components. Test and inspect parts during and after production to determine product acceptance. Use calipers, micrometers, and manual and digital gauges to ensure conformance with print specifications and established quality standards. Coordinate external calibrations and perform internal calibrations on simple gauges. Interpret part blueprints, material specifications, engineering plans, and geometric dimensions and tolerances (GD&T). Operational Maintenance: Follow existing policies and procedures, reporting any changes or improvements to Leadership. Analyze data and review part history to evaluate the reliability of source information. Resolve testing/inspection problems by checking measuring equipment and communicating issues as appropriate. Verify calibration and perform preventive maintenance on measuring equipment, troubleshooting malfunctions, and coordinating repairs as needed. Safety and Professional Development: Adhere to all safety procedures and regulations. Update job knowledge by participating in educational opportunities and reading technical publications. Requirements: Education: High school diploma or equivalent. Experience: Minimum of 2 years in manufacturing and metrology experience. Skills: Strong attention to detail and fundamental knowledge of CNC machining/manufacturing principles. Proficient in Microsoft Office suite, especially Excel. Excellent verbal and written communication skills. Ability to interpret technical drawings and blueprints. Strong mechanical aptitude and understanding of lean manufacturing principles. Ability to work independently and follow directions closely. Certifications: Not applicable. Preferred Qualifications: Experience with ISO 9001 requirements; familiarity with AS9100 and ISO 13485 is a plus. Behavioral Competencies: Leadership and Collaboration: Demonstrates solid collaboration skills, ability to listen and implement ideas, and work effectively with others. Adaptability: Versatile and flexible, able to handle multiple projects and tasks, and adaptable to help the organization grow. Core Values: Exhibits safety-focused behavior, tenacity, hard work, selflessness, teamwork, peaceful coexistence, patience, and perseverance. Physical Requirements: This position may involve standing, walking, bending, reaching, and use of hands and fingers. Ability to lift and move items up to 50 pounds. Environmental Conditions & Travel: Regular exposure to an office and manufacturing environment with moderate noise levels. Occasional requirement to wear suitable Personal Protective Equipment (PPE), such as safety glasses, while in manufacturing departments. Other Information: Work Hours: 6:00 AM - 2:30 PM Supervisory Responsibilities: None. Product Mix: Includes both aerospace and medical components. Join our team at Masterbilt Inc. and be a part of a dynamic environment where quality and safety are our top priorities.

ABOUT LOZIER Headquartered in Omaha, Nebraska, with facilities across the U.S., Lozier Corporation is the leading manufacturer of products used by retailers in stores and warehouses, with a vision to be operationally excellent in support of retail's present and future. Retailers have relied on our quality products and service for more than 65 years. BENEFITS AND SCHEDULE Company bonus potential. PTO (Paid Time Off) plus paid holidays. Competitive benefits package (Eligible for medical, dental, and vision benefits on the first day of employment). Onsite Health Clinic. 401(k) with employer match. Employee Assistance Program. Educational Assistance Program. Career Development Programs. Casual dress. Relocation benefits available, (as applicable). Monday thru Friday schedule, onsite. POSITION SUMMARY: The Quality Technician will be responsible for ensuring that products meet the established standards of quality, reliability, and performance. This role involves inspecting, testing, and verifying that all products adhere to company specifications and regulatory requirements. The ideal candidate will have a keen eye for detail, strong analytical skills, and a commitment to maintaining the highest standards of quality in all aspects of the manufacturing process. ESSENTIAL JOB FUNCTIONS Champion Lozier's Mission, Vision, and Core Values by demonstrating the behaviors that contribute to Lozier's success. Conduct routine inspections and tests on incoming materials, in-process products, and finished goods to ensure compliance with quality standards and specifications. Maintain detailed records of inspections, test results, and quality issues. Prepare reports summarizing findings and recommend corrective actions. Investigate quality issues and non-conformances. Perform root cause analysis and implement corrective and preventive actions (CAPA) to resolve issues and prevent recurrence. Ensure compliance with industry regulations, company policies, and quality standards. Assist in internal and external quality audits. Calibrate and maintain inspection and testing equipment to ensure accurate and reliable measurements. Work closely with production, engineering, and other departments to resolve quality-related issues and implement process improvements. Provide training and support to production staff on quality control procedures and best practices. Demonstrate regular attendance and timeliness in reporting to work, meetings, and completing assignments. Ability to work and interact well with others. OTHER JOB FUNCTIONS Provides support with continuous improvement and/or vendor selection training. JOB QUALIFICATIONS Education: Associate degree in quality management, quality assurance, manufacturing, or another related field is preferred. Experience: Prior experience in a manufacturing environment, if degreed. Minimum of 3 years of experience in a quality, manufacturing and/or engineering role within a manufacturing environment, if non-degreed. Required Skills · Proficiency in using inspection and testing equipment, such as calipers, micrometers, and gauges. · Familiarity with statistical process control (SPC) and quality management systems (QMS). · Understanding of quality standards and regulations (e.g., ISO 9001, AS9100). · Experience with root cause analysis and Corrective and Preventive Actions (CAPA). · Excellent attention to detail. · Strong analytical and problem-solving abilities · Effective communication skills. Preferred Skills · Quality certifications such as Certified Quality Technician (CQT) or Six Sigma Green Belt. · Previous experience in manufacturing environment. · Experience in use of Oracle software. SPECIAL DEMANDS Manufacturing plant with exposure to varying temperatures, noise levels, and machinery. Manual dexterity and visual acuity required for using gauges and measuring instruments. Standing and walking for extended periods during inspections. The above is meant to describe the general nature and level of work being performed. It is not intended to be an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties as assigned by their supervisor. Lozier reserves the right to modify, interpret, or apply this job description in any way desired and the essential job functions may be modified to reasonably accommodate qualified individuals with a disability. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Successful completion of pre-hire drug screen and post offer background screen is required to obtain employment. Continued employment remains on an “at-will” basis.

Valeo is a tech global company, designing breakthrough solutions to reinvent the mobility. We are an automotive supplier partner to automakers and new mobility actors worldwide. Our vision? Invent a greener and more secured mobility, thanks to solutions focusing on intuitive driving and reducing CO2 emissions. We are leader on our businesses, and recognized as one of the largest global innovative companies. Ready to tackle the challenges of the vehicle of the future? Join Valeo and revolutionize the comfort and well-being of all passengers! The Quality Technician is responsible for the administrative activities associated with processing warranty claims and resolving customers' concerns on product failures. You Will: * NOTE: This person will be located in the South Carolina area reporting to Elkhart site location * May be stationed at a specific customer for extended periods of time during new product launches etc. * Service/repair/replace HVAC systems on buses when required * Work closely with the Valeo TCV (Thermal Commercial Vehicles) Engineering and Quality teams to address customer concerns * Perform Quick Response Quality Control process to support continuous improvement Initiatives. * Maintaining a permanent dialogue with quality staff at the customer site * Constantly communicating customer expectations to site * Conduct full maintenance training courses on various heating, ventilation and air conditioning systems for transit bus and school bus systems to mechanics, technicians and management teams * May train other team members on various maintenance practices for the various systems offer by Valeo TCV * Meet regularly with the North American Service Manager to provide status on completed work * Attend internal meetings as needed * Complete field service and training reports and file with North American Service Manager timely and accurately * Follow standards and work instructions and support the creation of standards when needed * Ensures compliance with all safety procedures and standards including, but not limited to, performing tasks safely, wearing required personal protective equipment, maintaining a clean working area and implementing safety improvements * Escalate challenges and impediments to meeting customer's expectations. * Maintain highest security protocols to keep sensitive and protected customer and or company information confidential and secured * Maintain professional and positive relations with team members. * Comply with all company conduct rules You Should Have: * High School Diploma or GED (college degree is preferred) * Work experience with repairs of automotive heating and air conditioning units * Work Experience with root cause analysis quality systems preferred * Knowledge of 600V + electrical systems or ability to read a wiring diagram * Ability to read technical drawings and prints * Demonstrated ability to communicate effectively * Detail oriented and accurate * High degree of accountability and ownership * Strong organization skills * Proficiency in computer software- Microsoft Office, Google, etc. * Ability to work in a team environment * Able to work independently with minimal supervision * Demonstrated ability to satisfy customers Job: Site SQA Engineer/Technician Organization: Site Quality Schedule: Full time Employee Status: Regular Job Type: Permanent contract Job Posting Date: 2023-08-07 Join Us ! Being part of our team, you will join: * one of the largest global innovative companies, with more than 20,000 engineers working in Research & Development * a multi-cultural environment that values diversity and international collaboration * more than 100,000 colleagues in 31 countries... which make a lot of opportunity for career growth * a business highly committed to limiting the environmental impact if its activities and ranked by Corporate Knights as the number one company in the automotive sector in terms of sustainable development More information on Valeo: *********************

Dometic is a global market leader in the mobile living industry. Millions of people around the world use Dometic products in outdoor, residential, and professional applications. Dometic Land Vehicles Americas is a trusted provider of high-end products for recreational vehicles, commercial passenger vehicles and overlanding vehicles in North America, Latin America, and the Caribbean. We are on a journey of continuous growth - now looking for our next star - a passionate Rework Quality Technician within our Quality capability. This position reports to Lead Product Segment Quality Assurance Manager and will work in Elkhart, IN. As a Rework Quality Technician in the Quality team, you will be involved in identifying, documenting, and correcting non-conforming products or components through rework processes. This role ensures that all reworked items meet quality standards before being returned to production or shipped to customers. The technician collaborates closely with Quality Assurance, Engineering, and Production teams to maintain product integrity and compliance with specifications. General Responsibilities Facilitate and promote use of appropriate problem-solving techniques for effective root cause analysis and successful evaluation of returned products. Develop and conduct methods for testing and evaluation of returned products. Provide technical support for and continually review testing processes for all returned products. Apply systematic problem-solving methodologies in identifying issues found during testing of products. Complete Inspection of parts associated with customer complaints or SOHN. Reclaim tested products (ACs, Refers, Coolers, Etc). Repackage items damaged in warehouse (includes inspecting and testing items if applicable). Perform Rework for requests received through Segment Quality (includes reworking items, repackaging, relabeling, etc.) Assist RGA technicians with testing as needed. Assist RGA technicians with paperwork (includes receiving and dispositioning items returned under warranty). Assist Engineering Dept with special requests; testing and/or repairing items to regain functionality. Perform other tasks as assigned by supervisor. What do we offer? You are offered an interesting role in a dynamic, fast paced, and global environment with great opportunities to grow and take on new challenges. The growth at Dometic is continuous - which gives you great possibilities to evolve with the company. Medical/Dental/Vision Insurance Employee Assistance Program (EAP) Disability insurance (STD/LTD) 401 (k) with company match PTO Company defined holidays and two floating holidays for you to use as you choose Paid maternity/paternity leave Tuition assistance Membership reimbursement (wholesale club and gym) Employee discounts on our incredible products Opportunities to make an impact

Direct Hire Salary Quality Technician - Decatur, MI 1st Shift, Mon-Thurs, $21.25+/Hour Based On Experience Perform a variety of quality control tests on products at various stages of the production process to ensure compliance with quality standards. Physically measures component attributes and utilizes visual acceptance standards to verify compliance. Records dimensional/visual data comparing to standards. Analyzes data and determines acceptance. Follows established procedures for inspection methods and non-conformance activities. Participates in problem solving activities with others inside and/or outside the organization. Recommend modifications to existing, or suggest new standards, methods and procedures. Requirements: Performs work under limited supervision. Handles basic issues and problems and refers more complex issues to higher-level staff. Quality system standards, methods and procedure knowledge is required. Metrology knowledge is a plus. Possesses working knowledge of subject matter. Associate's degree along with 2-5 years of experience. Primary Physical Requirements: Frequently required to use hands and fingers to handle, feel or operate office equipment, and reach with hands and arms. Frequently required to talk and hear. Frequently required to sit for long periods of time. Required to occasionally stand and walk. Occasionally required to lift, push, pull and/or move up to 70 lbs with assistance. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Benefits: Holiday Pay Vacation Pay Health Insurance 401K Benefits Chance to win a brand-new car Referral Bonus Specialized Staffing Solutions, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Title: Quality Technician - 2nd Shift - Avilla IN Job Summary: The Quality Technician ensures that internal processes are being followed and that finished product meets customer specifications. Responsibility Operate CMM programs and interpret data collected. Conduct first piece set-up approvals. Conduct In-process floor audits. Disposition product in the Scrap and Hold Areas daily. Collect, evaluate, and record scrap on each shift. Ensure all documentation is completed correctly. Train operators as needed in gage reading and methods of usage. Assist in PPAP required studies.· Academic/Educational Requirements High School Diploma or Equivalent Required Skills/Experience Previous experience running a CMM is required. 1-3 years of experience working in Quality in a manufacturing setting preferred. Basic knowledge of quality systems. Basic blueprint reading and GD&T. Basic understanding of quality documentation (control plans, FMEA, Process flow diagrams). Excellent analytical and problem-solving skills. Excellent written and verbal communication skills. Excellent organizational skills and attention to detail. Proficient in Microsoft Office Suite or similar software. What Linamar Has to Offer Competitive Compensation Employee Benefits package includes but not limited to, Drug, Dental & Vision etc. 401k Program Opportunities for career advancement. Sustainability Counsel Community based outreach supporting both local and global initiatives and charities. Discounts for local vendors and events, including auto supplier discounts. Linamar Corporation is a Canadian-founded global manufacturer, renowned for its advanced engineering and innovative product development across diverse industries and markets. Our journey started in 1966 under the visionary leadership of our founder, and today, we remain committed to cultivating a culture of innovation and collaboration. With access to state-of-the-art tools and resources, you'll have the opportunity to make a meaningful impact alongside a team of driven and passionate professionals. Join us and be part of a company where innovation, collaboration, and growth are at the heart of everything we do. Linamar Corporation is an equal opportunity employer and encourages diversity in the workplace without regard to any basis protected by applicable federal, state, or local law. Linamar Corporation encourages applications from all qualified individuals and will reasonably accommodate applicants throughout all stages of the recruitment and selection process upon request. INDHIND1

Job Description Job Title: Weekend Quality Technician Department: Quality Job Type: Hourly (Weekend Schedule - 24 hrs worked, paid for 32 hrs) United Petfood is a private label producer of high-quality dry & wet pet food, biscuits, and snacks. We are a Belgian family business with 25 high-tech pet kitchens in Europe and the US. Joining us means being part of an international, passionate, and driven team with one common goal: a healthy planet filled with healthy pets! We value long-lasting partnerships, innovation, and providing an environment where our people can grow and thrive. Learn more: United Petfood Producers USA, Inc. Position Summary United Petfood is seeking a Weekend Quality Technician to join our Mishawaka team. This role is ideal for candidates who want a weekend-only schedule, working two 12-hour shifts (Saturday & Sunday, 6:00 AM - 6:00 PM). Weekend QA Technicians receive 32 hours of pay for 24 hours worked. The Quality Technician is responsible for maintaining food safety and quality programs, performing in-process testing, and ensuring compliance with GFSI standards, customer requirements, and company policies. Schedule & Pay Work Hours: Saturdays & Sundays, 6:00 AM - 6:00 PM Hours Worked: 24 hours/week Hours Paid: 32 hours/week Key Responsibilities Verify in-process testing performed by production operators (NIR - moisture, fat, protein; Aw - water activity, density, dimensions). Work with Processing Technicians and Shift Managers to address any out-of-specification product, completing support documentation. Conduct direct observations and verification of preventive controls (PCs) for food safety compliance. Perform GMP inspections, environmental swabbing, and pre-operational checks. Run laboratory tests for raw materials and finished products. Analyze data and provide results to management. Maintain the sample library and submit samples for third-party testing when needed. Review analytical and pre-shipment documentation to release finished products. Accurately complete all quality and food safety documentation. Support continuous improvement in quality and food safety programs. Perform other duties as assigned. Workplace Safety Complete safety documentation and ensure compliance with safety standards. Participate in mandatory safety trainings. Immediately report safety issues, near misses, and injuries. Quality & Food Safety Maintain compliance with company food safety programs and BRC system requirements. Participate in food safety and quality training. Take corrective actions when quality or food safety issues are identified. Required Qualifications Bachelor's degree in Food Science, Microbiology, Meat Science, or equivalent experience. Quality Assurance experience in food or pet food manufacturing preferred. Strong time management, prioritization, and problem-solving skills. Ability to influence and collaborate effectively across teams. Strong written and verbal communication skills. Detail oriented, with the ability to work independently and as part of a team. Proficiency with Microsoft Office (Word, Excel, Outlook, PowerPoint). Ability to lift up to 50 lbs, stand for extended periods, bend, reach, push/pull up to 50 lbs, and climb ladders/catwalks. Preferred Qualifications Knowledge of food manufacturing policies and procedures. Familiarity with GFSI and BRC quality systems. Previous lab testing or QA experience in production environments. Equal Opportunity Employer: United Petfood Producers USA Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive workplace for all employees.

Job DescriptionQuality Technician Full-Time | Kalamazoo MI Precision Matters Here. So Do You. Gaishin Manufacturing is hiring a Quality Technician who knows that details make the difference between “good enough” and world-class. If you're sharp, hands-on, and confident working independently in a manufacturing environment, this role puts you at the center of what we do: delivering high-quality parts that meet demanding customer and industry standards. This is a great opportunity for someone who enjoys inspection work, data-driven quality control, and being trusted to own their craft. What You'll Be Doing As a Quality Technician, you'll be responsible for executing inspection and quality control activities that keep production moving and standards high. Your day-to-day will include: Performing in-process and final inspections on manufactured parts Completing and maintaining inspection reports and quality documentation Verifying products meet customer specifications and internal quality standards Using precision inspection tools including micrometers, calipers, height gauges, and optical comparators Ensuring all inspection and test equipment is properly calibrated Identifying, documenting, and reporting quality issues or nonconformances Collecting, organizing, and analyzing inspection data Supporting continuous improvement initiatives within quality control processes Working closely with production teams to ensure quality checks align with workflow What We're Looking For We're looking for someone who brings technical skill, strong judgment, and pride in their work. Ideal candidates will have: Experience in a manufacturing or machining environment Hands-on experience with precision measurement and inspection equipment CMM and/or automated visual measurement experience (preferred, not required) Calibration experience (a plus) Strong attention to detail and high visual awareness Solid organizational and documentation skills Proficiency in Microsoft Office (Excel, Word, reporting) Ability to read and interpret technical drawings and specifications Ability to work independently with minimal supervision Why Work at Gaishin Manufacturing We're a precision manufacturing company serving aerospace, medical, and commercial industries. We value people who take ownership, care about quality, and want to be part of a team that does things right the first time. If you want stability, growth, and work you can stand behind, you'll find it here. Ready to take the next step? Apply now.

Job DescriptionAre you detail-oriented and passionate about quality? Join our team and help us ensure every product meets the highest standards!APEX Placement and Consulting has partnered with an exciting company in Benton Harbor, MI looking to add a Quality Technician to their already amazing team. Their primary responsibility will be to inspect and verify parts to ensure they meet quality standards. Keep reading for more details!What's in it for you: 1st and 3rd shift opportunity - 7am to 7:15pm or 7pm to 7:15am. Rotating 3- and 5-day work weeks. Week A: Tuesday, Wednesday, Thursday Week B: Monday, Friday, Saturday, Sunday Contract-to-hire position - you'll be hired based on attendance, performance and client needs Competitive hourly rate at $17.50/hr. + shift premium for nights Amazing benefit package once hire in permanently Medical, Dental and Vision 401K with employer match Flexible Spending Accounts Paid vacation Attendance bonus What your day will look like: Set up and run CMMs/FCS fixtures per Product Control Plan; review inspection reports and report issues. Perform additional gauging not covered by CMM and escalate out-of-tolerance results. Check and document production scrap and defects every 2-3 hours. Carry out back purge procedures when needed. Review job documentation and report any deviations from blueprints or instructions. Assist with product launches, PPAPs, machine setups, and prototype inspections. Support other tasks as assigned to meet company goals. What we are looking for: High school diploma or equivalent Previous manufacturing experience in a quality role Basic computer knowledge. Familiar with OSHA, EPA, and industry standards (ASTM, API, NFPA, ASME). Experience with Ford, GM, and Chrysler specifications preferred. At Apex, we actively encourage applications from underrepresented groups. Your unique experiences and perspectives are valuable to us, and we're excited to see how you might contribute to our team. While we have outlined a set of qualifications for this role, we recognize that experience and skills can come from a variety of backgrounds. If you meet most of these qualifications and are eager to learn and grow with us, we invite you to apply.

Job Description SUMMARY: The Quality Technician is primarily responsible for ensuring product quality by conducting inspections, verifying compliance with quality standards, supporting assembly, molding and paint operations, and maintaining accurate documentation. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. · Perform first-piece inspections on all active molding and assembly presses at the start of the shift including color checks, SPC measurements, and gaging. · Collect parts from molding and assembly for SPC checks once per shift. · Make quality decisions per the proper standards and samples. · Review, create, and sign off on labels, mold/color change logs, and other required documentation for management. · Review and update quality alerts; ensure alerts are properly addressed. · Conduct mid-shift audits via various documents and record findings. · Contain and clearly label any defective parts found during the shift. · Respond to operator-reported issues and ensure defective items are held from production. · Sort parts on hold during downtime and return acceptable parts to production or remove from the system. · Assist in updating Work Instructions (WI) and document changes. · Support color checks, gloss testing, and film build measurements. · Clearly label, contain, and segregate suspect or rejected parts in accordance with company protocols. · Any other project deemed necessary by Department head(s). · Maintain compliance of IATF 16949 / ISO 9001 / ISO 14001. Follows all safety, housekeeping and company policies and procedures. Coordinates and maintains all job responsibilities in a continuous and flexible manner and performs other related duties and job assignments as required. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Proven experience in quality inspection within a manufacturing or assembly environment. Ability to perform color evaluations for the Farnsworth-Munsell 100 Hue Test. Comfortable using Microsoft Office Suite (Word, Excel, Outlook, etc.). Strong attention to detail and organizational skills. Ability to work 12-hour shifts and weekends based on production demands. Strong verbal communication skills to engage with diverse teams; people oriented. Ability to interpret and enforce quality standards and work instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, and walk. Occasionally bend, squat, reach, twist/turn and lift up to 10 lbs. Specific vision abilities required by this job include ability to adjust focus. Powered by ExactHire:149476

Follow all Safety Guidelines & Procedures (i.e. LOTO, Guarding). Perform physical testing of raw material, production, development trials, and composites. Perform hourly production line inspections and record results. Prepare Master Control Samples. Assist with Certificate of Conformance reports. Assist with PPAP testing. Inspect and recommend disposition of Nonconforming or suspect material. Work closely with line personnel to ensure quality is understood throughout the production process. Provide administrative support for the Quality Department. Follow and interpret policies and procedures. Work with customer service and other departments as needed. Ensure calibrations are up to date. Follow up on corrective action or action plans. Document and data control review. Actively participate in the 6S Process and maintain housekeeping during the shift. Assist production personnel with tasks supporting the production line. Other duties as assigned. 12 HR Swing Shift- 2/3/2 schedule Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED). Nonwovens experience is a plus, but not required. Ability to operate testing equipment and performing lab testing. Basic computer and math skills. Good verbal and written communication skills and ability to work on a team as well as independently. Ability to work in hot/cold manufacturing environment, which can include standing and/or sitting for the duration of the task. Ability to transport or move up to 50lbs. of material. Ability to understand and comprehend simple instructions, correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to supervisors and/or other employees. Ability to work 12-hour shifts and every other weekend when business demands warrant a 24-7 continuous operation.

Job DescriptionDescription: Job Summary: The Quality Technician will be responsible for conducting physical inspections of metal fabricated products and managing document control processes to ensure compliance with industry standards and customer specifications. Key Responsibilities: Perform physical inspections of metal fabricated products to verify dimensions, tolerances, and overall quality. Utilize precision measuring instruments such as calipers, micrometers, and gauges to conduct inspections. Document inspection results and maintain accurate records of quality checks. Identify and report non-conformances, and work with production teams to implement corrective actions. Manage and maintain document control systems, ensuring all quality documentation is up-to-date and easily accessible. Review and approve quality-related documents, including inspection reports, certificates of compliance, and material test reports. Assist in the development and implementation of quality control procedures and standards. Conduct internal audits to ensure compliance with ISO and other relevant standards. Collaborate with engineering and production teams to address quality issues and improve processes. Participate in continuous improvement initiatives to enhance product quality and operational efficiency. Requirements: High school diploma or equivalent; technical degree or certification in quality control or a related field is preferred. Minimum of 2 years of experience in quality inspection and document control, preferably in a metal fabrication environment. Proficiency in using precision measuring instruments and inspection tools. Strong understanding of quality control principles and practices. Familiarity with ISO standards and quality management systems. Excellent attention to detail and strong analytical skills. Effective communication and interpersonal skills. Ability to work independently and as part of a team. Proficient in Microsoft Office Suite and quality management software. Physical Requirements: Ability to lift and carry up to 50 pounds. Ability to stand for extended periods and perform repetitive tasks. Good hand-eye coordination and manual dexterity.

Job Summary: The Quality Technician will be responsible for conducting physical inspections of metal fabricated products and managing document control processes to ensure compliance with industry standards and customer specifications. Key Responsibilities: Perform physical inspections of metal fabricated products to verify dimensions, tolerances, and overall quality. Utilize precision measuring instruments such as calipers, micrometers, and gauges to conduct inspections. Document inspection results and maintain accurate records of quality checks. Identify and report non-conformances, and work with production teams to implement corrective actions. Manage and maintain document control systems, ensuring all quality documentation is up-to-date and easily accessible. Review and approve quality-related documents, including inspection reports, certificates of compliance, and material test reports. Assist in the development and implementation of quality control procedures and standards. Conduct internal audits to ensure compliance with ISO and other relevant standards. Collaborate with engineering and production teams to address quality issues and improve processes. Participate in continuous improvement initiatives to enhance product quality and operational efficiency. Requirements High school diploma or equivalent; technical degree or certification in quality control or a related field is preferred. Minimum of 2 years of experience in quality inspection and document control, preferably in a metal fabrication environment. Proficiency in using precision measuring instruments and inspection tools. Strong understanding of quality control principles and practices. Familiarity with ISO standards and quality management systems. Excellent attention to detail and strong analytical skills. Effective communication and interpersonal skills. Ability to work independently and as part of a team. Proficient in Microsoft Office Suite and quality management software. Physical Requirements: Ability to lift and carry up to 50 pounds. Ability to stand for extended periods and perform repetitive tasks. Good hand-eye coordination and manual dexterity.

Full-time Description Self-starter? Detail oriented? Motivated? Follows through? Problem-solver? Multi-tasker? If these describe you, Kanak Naturals might be the place for you! We are looking for a Quality Technician to join our team. We are a fast-paced company looking for someone who will be an integral part of our quality management team. At Kanak Naturals, our focus is on high-quality, sustainable, disposable tableware and food containers. In this role, you will have the following responsibilities: Conduct inspections and testing of all products based on established quality standards Complete and maintain records and data of all testing and inspections for review Read and follow work instructions, work rules and directions Use inspection, measuring and test equipment as required Conduct inspections and testing on new product development items, prototypes, samples and other items to assist in new product development Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns to management Troubleshoot product quality issues that arise Requirements Successful candidates will have the following skills, experience, and/or abilities: Impeccable attention to detail Good communication skills, both written and verbal Positive attitude Self-motivated Ability to read and understand various measurement equipment Ability to work as part of a team whenever it is necessary to do so, but also be able to work independently Good analytical skills and ability to prioritize and adapt in the face of multiple tasks Strong problem solving and reasoning skills 3 years of experience with Microsoft Excel Quality inspection and documentation experience preferred Kanak Naturals is an ever-growing company looking to add talented people to our team. If this sounds like you, apply for our Quality Technician position and grow with us!

Hendrickson is a supplier of truck suspension systems and components as well as an aftermarket supplier for various truck components to the heavy-duty vehicle market. Hendrickson has a fantastic opportunity for a Quality Technician in our facility just North of Fort Wayne, IN located in Kendallville, Indiana. Position Purpose: The Quality Technician's responsible for the inspection and testing of supplier products and processes to assure good product quality to the distribution center. Essential Functions: * Communication with suppliers to ensure good product to the manufacturing facility * Reviews, updates, and works with suppliers on PPAPs * Ensures incoming materials are in-compliance to required specifications * Maintains Databases to support quality operations. * Preparations of reports, spreadsheets and Data Analysis including Capability Studies, Rework reports, Receiving Summary, Scrap reports, Quarantine report, Scrap pareto's and any material to help floor auditing group. * Provides administrative support to Quality Manager and Quality Engineers. * Support systems as directed to support IATF 16949/ISO 14001 compliance activities and audits. * Support as directed improvements in plant PPM, Customer concerns and supplier issues * Facilitates and performs processes capability studies. * Support APQP/SPPD launch initiatives and changes (CR's) using problem solving tools * Other Quality duties as directed by supervisor Education and Training * High School diploma required * Associate degree preferred * Two or more years of related quality manufacturing experience preferred Minimum Qualifications * Experience working with IATF 16949 methodology preferred * Working knowledge in APQP tools (PFMEA, Control Plans, DOE) preferred * Experience in manufacturing quality environment preferred * Knowledge in dimensional gage use preferred * Print reading skills required. * GDT understanding preferred * Strong ability to work without supervision * Strong work ethic We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or other characteristics protected by law.

Full-Time | Kalamazoo MI Precision Matters Here. So Do You. Gaishin Manufacturing is hiring a Quality Technician who knows that details make the difference between “good enough” and world-class. If you're sharp, hands-on, and confident working independently in a manufacturing environment, this role puts you at the center of what we do: delivering high-quality parts that meet demanding customer and industry standards. This is a great opportunity for someone who enjoys inspection work, data-driven quality control, and being trusted to own their craft. What You'll Be Doing As a Quality Technician, you'll be responsible for executing inspection and quality control activities that keep production moving and standards high. Your day-to-day will include: Performing in-process and final inspections on manufactured parts Completing and maintaining inspection reports and quality documentation Verifying products meet customer specifications and internal quality standards Using precision inspection tools including micrometers, calipers, height gauges, and optical comparators Ensuring all inspection and test equipment is properly calibrated Identifying, documenting, and reporting quality issues or nonconformances Collecting, organizing, and analyzing inspection data Supporting continuous improvement initiatives within quality control processes Working closely with production teams to ensure quality checks align with workflow What We're Looking For We're looking for someone who brings technical skill, strong judgment, and pride in their work. Ideal candidates will have: Experience in a manufacturing or machining environment Hands-on experience with precision measurement and inspection equipment CMM and/or automated visual measurement experience (preferred, not required) Calibration experience (a plus) Strong attention to detail and high visual awareness Solid organizational and documentation skills Proficiency in Microsoft Office (Excel, Word, reporting) Ability to read and interpret technical drawings and specifications Ability to work independently with minimal supervision Why Work at Gaishin Manufacturing We're a precision manufacturing company serving aerospace, medical, and commercial industries. We value people who take ownership, care about quality, and want to be part of a team that does things right the first time. If you want stability, growth, and work you can stand behind, you'll find it here. Ready to take the next step? Apply now.