Quality control technician jobs in Sparks, NV - 90 jobs

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. Production Test Technician: Payrate: $25.50 Performs the set-up, calibration, testing and troubleshooting of circuits, components, instruments and mechanical assemblies. Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams. Tests and troubleshoots assemblies and/or final systems. May complete rework on assemblies and/or systems as a result of testing. Prepares technical reports summarizing findings and recommending solutions to technical problems. May assist in the selection and set-up of specialized test equipment. @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Dassault Falcon Jet -Maintenance, Repair and Overhaul (MRO) facility in Reno, Nevada is seeking a full-time Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. Also, providing the approval for return to service with respect to the work performed for work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. Job Duties & Responsibilities: * Responsible to Quality Assurance for quality and airworthiness and may report to Crew Chief for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, makes adjustments and repairs, replaces components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. Requirements * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 3 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment and tools used to perform aircraft maintenance and alterations. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills/ * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training Compensation and Benefits The compensation for this position typically falls between $38 - $50 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime. This position may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Now hiring! QA/QC Technician I Sparks,GA. We are looking for a QA/QC Technician to join our Agricultural Solutions team in Sparks,GA. Come create chemistry with us! BASF's Agricultural Solutions division connects innovation, customers, partners and agricultural experts and integrates sustainability criteria into all business decisions. We help farmers deliver the best possible outcomes, working to achieve the balance between economic, environmental, and social value creation for sustainable and efficient agriculture. The QC Laboratory Technician ensures the quality of products by performing physical and chemical analyses of raw materials, in-process and finished products in support of the manufacturing process. This position requires schedule flexibility to assist with vacation coverage of other team members when necessary (including some weekends and holidays) as well as some early-morning training responsibilities During your shift as a QA/QC Technician I, you will * Analyze routine raw material, in-process, and finished good samples using various laboratory techniques including High Performance Liquid Chromatography (HPLC), Gas Chromatography (GC) and other methodology such as particle size analyzer, density meter, viscometer, etc. * Provide timely and accurate documentation of all analytical data according to Standard Operation Procedures (SOP) * Escalate Out-of-Spec materials to QC Lab Supervisor for data review. * Aid in management of inventory of consumables such as HPLC columns, spare parts, reference standards, and control samples. * Complete routine troubleshooting and maintenance of laboratory equipment. * Identify and implement process improvement in laboratory functions. * Strict adherence to established quality, safety and environmental standards is required * Handle and maintaine Hazardous and Nonhazardous Waste from Lab testing and Equipment per the site guidelines. If you have... * High School Diploma with a minimum of 4 years laboratory experience or 2 years chromatography experience or Bachelors Degree (BS) (Chemistry or related science field) with minimum 2 years lab experience. * Strong math skills. * Strong computer skills including proficiency in Microsoft Word and Excel. * Strong knowledge of analytical techniques, understanding of proper chemical handling, use, storage and disposal. * Experience with Gas Chromatography (GC) * Experience with Liquid Chromatography-Mass Spectroscopy (LCMS). * Must be able to work a rotating shift that includes days, nights, weekends, and holidays. Create your own chemistry with you@BASF At BASF, you will have the chance to do meaningful work towards building a more sustainable future. In addition to competitive compensation and benefits, BASF provides you with access to a wide range of elements to help you be your best. It's what we call you@BASF. We are committed to providing benefits, programs, and opportunities that support our employees' overall well-being, personal growth, and a safe, collaborative, and inclusive work environment. Just some of the many benefits we offer include: * Flexible work arrangements whenever possible * Highly competitive retirement savings plan with company match and investment options * Well-being programs that include comprehensive mental health support for you and your household family members * Family forming benefits (fertility, adoption and surrogacy reimbursement, maternity/parental leave, and more) * Back-up child and elder care with discount programs for families of all ages and stages * Mentoring and career development opportunities that allow you to share, learn, and thrive * Matching gifts program that allows you to deepen the impact of your contributions to qualified charities. * Employee crisis support for when the unexpected happens * Access to our BASF wine cellar, employee discounts, and much more! About us As one of the largest chemical companies in North America we have been finding solutions for your everyday needs and addressing the most complex economic, environmental, and sustainability challenges for more than 150 years! At BASF we empower our employees with the tools, guidance and opportunities they need to advance and succeed in work and life. Giving you the support you need to be your best and fulfill your personal ambitions is what helps us create chemistry. After all, our success is linked to yours. Whatever path you envision, BASF is a great place to build a rewarding, successful career. Belong to Something Bigger. #belongat BASF Privacy statement BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ***************************** to report fraud. Pay transparency BASF is committed to pay transparency practices. The competitive [pay range/starting wage] for this role is $xxx - $xxx. Actual pay will be determined based on education, certifications, experience, and other job-related factors permitted by law. Equal employment opportunities We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

Job Description American Battery Technology Company (ABTC) is an industry-leading battery metals and critical material technology development and commercialization company. Our Pilot Plant just outside of Reno, Nevada will be the first integrated implementation of our multi-step processing train for the full mechanical processing, physical separation, chemical extraction, and production of commercial-scale battery metals that will be resold back into the battery manufacturing supply chain to enact a low-cost, low environmental impact, and domestically sourced closed-loop circular economy. We are seeking a highly motivated and detail-oriented Quality Technician to join our Li-ion battery recycling operation. This critical role reports directly to the Head of Quality and plays a vital part in ensuring the safety, quality, and efficiency of our battery disassembly, processing, and finished product quality. This position is for our D-shift staff, working nights, Thursday through Saturday, and every other Wednesday. Requirements Experience: Proven professional experience (2+ years) in a quality control, technician, or related technical role, preferably within a manufacturing, recycling, or complex technical environment. Battery Expertise: Direct hands-on experience with Li-ion battery technology, including familiarity with common battery pack and module architectures. Mechanical Fluency: Demonstrated mechanical aptitude and proficiency in using a variety of hand tools for precise disassembly, inspection, and maintenance tasks. Documentation & Communication: Excellent written communication skills, with experience in technical writing, including the creation and maintenance of SOPs, work instructions, and quality reports. Attention to Detail: Meticulous approach to recording data, performing inspections, and accurately executing product sampling protocols. Responsibilities In-Process Quality Control & Sampling: Execute routine sampling and testing of recycled products (e.g., black mass, metal fractions) generated by the recycling operation multiple times per day. Document and report all test results, non-conformances, and material inconsistencies accurately. Disassembly Inspection & Assurance: Conduct in-depth mechanical disassembly and inspection of battery packs and modules, requiring proficient use of various hand and power tools (e.g., wrenches, sockets, multimeters). Perform visual, dimensional, and functional quality inspections on incoming Li-ion battery packs and modules to ensure non-conforming material does not enter our recycling process. Work closely with production personnel during the disassembly process to verify adherence to quality and safety standards. Procedure Development & Documentation: Collaborate with production and engineering teams to develop and write clear, concise Standard Operating Procedures (SOPs) for safe Li-ion battery disassembly and initial processing steps. Maintain and update quality records, inspection logs, and documentation systems in compliance with quality management standards. Safety & Compliance: Support and enforce strict adherence to quality management systems and internal safety standards. Crucially, a strong preference will be given to candidates with knowledge of Li-ion battery electrical safety protocols and high-voltage handling best practices. Nice-to-Have Knowledge of high-voltage electrical safety standards and procedures relevant to Li-ion batteries (e.g., NFPA 70E, OSHA guidelines). Experience utilizing analytical equipment for material testing or quality assurance in a manufacturing or recycling environment. Relevant technical certification or associate's degree (e.g., Electrical Technology, Mechanical Technology, or Quality Assurance). Benefits Competitive Pay Company-sponsored health, dental, vision, and life insurance Parental Leave Company-sponsored Employee Assistance Program Stock options 401(K) Paid time off Monthly phone stipend Equal Opportunity Employer American Battery Technology Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Americans With Disabilities Act American Battery Technology Company does not discriminate based upon disability in its hiring or employment practices and complies with the ADA title I employment regulations. If you need assistance or an accommodation due to a disability or a special need, please contact Human Resources.

Job Summary: The Quality Control Technician is responsible for the verification of purchased product, incoming inspection of purchased materials, and finished goods acceptance. Quality system requirements are effective in accordance with 21 CFR 820, ISO 13485 for Medical Devices, and international regulations as applicable. Reporting to: Quality Manager, Quality Engineers Examples of Essential Functions: Including but not limited to: * Perform receiving inspection activities for material conformance, product inspection, and review of lot history records. * Perform in-process quality inspection of assembled medical devices. * Observes and enforces Controlled Environment Room/Cleanroom Protocols. * Creates and maintains quality Records for components and materials used in the production of medical devices. Observes and enforces good documentation practices, as well as ensuring full traceability of material origin. * Adheres to general safety policies, company policy, manufacturing procedures, training requirements, and applicable standards/regulations for the production of medical devices. * The identification, control, and release of materials that do not conform to specification. * Work with engineers to improve component specifications and recommend actions to prevent occurrence of non-conformities. * Calibrates measurements tooling and equipment as needed Qualifications Guidelines: Any combination equivalent to, but not limited to, the following: Education/Training/Experience: * High school diploma or equivalent. Experience with Medical or related industry preferred. * Knowledge/Skills/Abilities: Demonstrated knowledge of Metrology and Inspection Technique. * Ability to use hand tools, calibrated instruments, measurement equipment, microscopes, and testing fixtures. * Basic understanding of Quality System Regulation * Expertise in Microsoft Office applications * Excellent written and verbal communication and interpersonal skills * Ability to prioritize and organize work independently. * Flexible and comfortable in fast paced work environment * Proficiency with written and spoken English Qualifications Guidelines: Any combination equivalent to, but not limited to, the following: Education/Training/Experience: * High school diploma or equivalent. Experience with Medical or related industry preferred. * Knowledge/Skills/Abilities: Demonstrated knowledge of Metrology and Inspection Technique. * Ability to use hand tools, calibrated instruments, measurement equipment, microscopes, and testing fixtures. * Basic understanding of Quality System Regulation * Expertise in Microsoft Office applications * Excellent written and verbal communication and interpersonal skills * Ability to prioritize and organize work independently. * Flexible and comfortable in fast paced work environment * Proficiency with written and spoken English

Job Description Quality Inspector Job Summary Quality Inspectors perform various sorting, inspection, production, and data capture. Quality Inspectors work in partnership with our customers to contain and improve quality issues the most efficient way possible. Our vision is to be the Leading Global Provider of Premium Inspection and Quality Assurance Services. We create an atmosphere where we recognize the individual, work together to solve problems, and foster an environment for employee growth. Quality Inspectors work in manufacturing plants, warehouses or other locations where our customers parts are being produced or stored. The location may vary day to day depending on the needs of our customers. Teams work collectively to ensure that we are responsive, accountable, and accurate in all aspects of our work. It's important and our people are key to our continued success. Quality Inspector Job Responsibilities & Duties Performs various sorting, inspection, production, and data entry Reads and follows work instructions, work rules and directions Maintains organization and cleanliness of work area Uses inspection, measuring and test equipment as required Completes required training classes Follows all employee policies and other duties as assigned Quality Inspector Job Qualifications & Skills Flexibility and adaptability Positive attitude and self-motivated Detail orientated

The Quality Technician performs quality control tests/inspections on products at various stages of production process. Duties require verbal and written communication ability, visual acuity to product detail, manual coordination to operate hand tools and testing equipment, ability to enter data in computer system and the physical ability to lift various weights. Essential Job Functions Performs quality check of printed, laminated and slit roll samples and pouches on a regular basis to verify Operator's result for dimension. Operates quality control testing equipment/tools. Collects and manages sample retained. Collaborate with Operator and Production Supervisor in ensuring product conformance during job set up for approval to run. Respond and assist Production and/or Quality Supervisor in verifying reported non-conformities for quick resolution or corrective action. Communicate deviation incidents to concerned personnel for corrective action. Place non-conforming raw materials, WIP & Finished products ON HOLD/Quarantine on Radius, update the Quality Log and communicate to concerned personnel. Assist Quality Supervisor in sampling and verification of internally quarantined and customer returned non-conforming materials to identify proper disposition. Generates and issues Certificate of Analysis directly to customer or save in the system. Communicates discrepancies of production documentations (WI, SOP, Layout, etc.) to Management and CSR for timely correction. Prints quality forms for production personnel if needed. Read and replies to e-mails in timely manner. Cooperate in the maintenance, cleanliness and organization of the Laboratory. Cooperate during root cause analysis to identify proper corrective & preventive action. Assist in collection, preparation and review of customer required samples. Perform filing of quality documents/records. Assist with team members with their responsibilities as needed or during their absence. Attend team meetings and feedback on any quality related issues/improvements. Assist in employee trainings, if required. Follow all established safety rules and regulations and utilize required safety equipment. Report defective equipment or unsafe conditions to the appropriate personnel. Maintain work area in a clean and orderly condition. Follow all company Good Manufacturing Practices & Policies. Perform other duties as required or as requested by Supervisor or Manager. Ability to work a flexible schedule if needed. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Skills and Knowledge Technical or vocational degree is a plus. Able to consistently act independently and prioritize work. Practical interpersonal and written communication skills Experience with ERP and other Maintenance Planning tools. Strong analytical and problem-solving skills Strong sense of ownership, work ethic, good judgment, and decision-making skills Familiar with Microsoft Office (Word, and Excel). Able to work in a fast-paced environment and multi-task effectively. Excellent organizational and prioritization skills. Excited about taking on new challenges in the manufacturing industry Self-motivated, hands-on, practical mindset, and capable of setting and reaching ambitious goals. Ability to work as part of a team and independently. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Physical Requirements: While performing the duties of this job, the employee is regularly required to stand, walk, sit, and use hands to handle or feel. The employee frequently is required to talk or hear. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The noise level in the work environment is usually loud. Period lifting of pallets weight and material weighing up to 50lbs Squatting, crouching, turning, twisting, stretching, climbing steps, grabbing, pulling, pushing, and bending. Visual and hearing acuity within normal limits Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical environment of manufacturing and production facilities. Exposure includes but is not limited to continuous noise, scent of materials, bright workstations, machinery with moving parts. Other Details: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. It is the responsibility of all Employees to ensure that the product produced by Garlock Flexibles meets or exceeds the expectations for quality of Garlock Flexibles and their Customers. It is also the responsibility of all employees to ensure that the Hygiene of their work area meets or exceeds the standards set in Garlock Flexibles Good Manufacturing Practices Manual .

Trivium Packaging is a global sustainability leader in metal packaging with more than 60 locations worldwide, nearly 8,000 employees, and an annual revenue of approximately €3.0 billion. Trivium serves a diverse range of customers in a variety of end markets such as food, seafood, pet food, nutrition, beauty and personal care, household care, and premium beverages. Trivium wants to shape the industry and has embarked on an ambitious transformation journey. In the near term, focus is on building & upskilling the team, deciding where to play & how to win, and increasing financial performance by executing the Trivium Business System (commercial, operational, and supply chain excellence). Sustainability is embedded in our materials and in our actions. Trivium has ambitious sustainability targets and focuses exclusively on products that are infinitely recyclable. Our company sustainability journey has been awarded with a Platinum medal by EcoVadis, the world's leading rating agent who allocated this award only to the top 1% of the >75000 companies reviewed. Sustainability is embedded in each and every function at Trivium, it‘s in our DNA. The global head office is at Amsterdam Airport; however, many people work in virtual teams from different countries. Our culture is results-driven, entrepreneurial, informal, and highly multicultural. Our people have a high degree of responsibility. Job Summary: Under the direction of the Quality Manager, the Quality Technician (QT) will be an expert in the quality requirements of each production line as well as the quality system (APC). The QT must become fully proficient in understanding the quality standards, policies, APC systems, quality specifications, and ITM's (Information Training methods/SOP's). The QT is responsible for the accuracy and completeness of all quality checks and tests for the quality department as well as the proper reaction to the test results including effectively communicating with the team members, team leader, or manager as applicable. This position monitors and maintains all department equipment in a manner that provides for safe and quality operations. The QT is accountable for the department quality requirements as well as problem solving and training on defects. The QT will be instrumental in communicating, problem solving, analyzing, and reacting to quality problems as they arise. The QT will work closely with the plant management staff, crew team members, and working independently when required. The QT will be a resource for trials, process improvement, and product improvement activities. Job Duties: Maintain safe working environment for team members and equipment. Perform quality checks and inspections per defined standard work. Achieve and sustain competency on all gauges and quality checks. React to the quality check results according to company guidelines. Train all rotating team members on all required quality checks and measurements. Ensure all quality checks are completed and documented correctly as per requirements. Perform test studies and special measurements as required. Attain and sustain good working knowledge of SPC, control charts, ITM's, quality policies, and plant instructions that pertain to quality. Ensure all HFI (Hold for Inspection) on their shift is properly documented and located and provide assistance and guidance to Team Leaders or Supervisors with regards to HFI. Ensure all housekeeping tasks are completed daily, weekly, and as required. Follow 5S standards for the quality lab, and any other plant area as applicable. Assist Operator Technicians and Team Leaders when the line is down as directed. Provide quality guidance and assistance to Team Leaders and Supervisors on off shifts and weekends. Perform duties and tasks as directed by the Quality Manager. Lead the quality department pass down briefings to the oncoming shift. Identify and replenish supplies of test solutions, cross section materials, and other quality consumables. Follow directions of Team Leader and Supervisor on the shift with respect to emergency situations and other critical operational issues. All other duties as assigned. Qualifications and Experience Requirements: Strong written/verbal communication skills Ability to coach, train, mentor, and facilitate job tasks Excellent people skills, high energy and positive cultural fit and attitude Familiarity with Lean manufacturing practices Familiarity with self-directed work team cultures is preferred PREFERRED: Strong quality related background as well as technical background/aptitude Demonstrated attention to detail and ability to react and escalate appropriately Demonstrated ability to troubleshoot and problem solve Demonstrated ability to motivate people and maintain a safe, cohesive work environment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, behaviors and or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and or Experience: High school diploma or GED required 2+ years experience working High speed manufacturing environment; 5+ preferred Preferred Qualifications: Experience within the metal can & end making industry Basic to intermediate skills with proficiency in all Microsoft Office applications (Word & Excel) Have acceptable attendance record Must demonstrate acceptable attention to detail with respect to documentation and job completion Must demonstrate good self-direction with minimal supervision Must have demonstrated good training and instructional skills. Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually very loud outside of the office/lab area. Employees must wear hearing protection and all other assigned Personal Protective Equipment. Temperature can range from extreme cold (90 degrees). Environment is subject to strong vibrations, and exposure to frequent visual and audible alarms. The atmosphere contains fumes, dust, odors and chemicals used in metal manufacturing process. While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle, grip, pull, feel, talk or hear. The employee is frequently required to reach with hands and arms and stoop, kneel, crouch or crawl. The employee will need to work at computer and other electronic screens. The employee must frequently lift and or move up to 30 pounds. Specific vision abilities required by this job include close and distance vision as well as color recognition. Good hand eye coordination is necessary. Ability to work around conveyors and high-speed mechanical equipment in a manufacturing and warehouse environment required. Average hours per week: 40 or 36/48 alternating Usual shift worked is: 8 or 12 hours Stand 90% Sit 10% Walk 90% Lift 30% Squat 20% Crawl 10% Climb 20% Bend (90 degrees) 20% Twist (30 degrees) 50% Reach above shoulders 20% Kneel 20% Work at heights 5-30 ft 20% Work at heights 30+ ft 5% Occasionally 1-33%, frequently 34-66% and continuously 67-100% of the time. This position requires ability to lift: Up to 15 lbs Frequently 16-30 lbs Frequently 31-50 lbs Occasionally 51-75 lbs Occasionally 76-100 lbs Not required Over 100 lbs Not required Must be willing to work all rotating or permanent shifts, including day and night 8 and/or 12 hour shifts, weekends and holidays. BRINGING YOUR TRUE SELF TO WORK To reach our goals, we know we need colleagues at all levels who are truly diverse in every way. That's why we are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. Our customers come from a wide range of backgrounds, and so do our people and It's business critical for us to ensure all our people have what they need to perform at their best and can be their true selves at work.

At Nox Group, we are dedicated to humanizing construction as one of the fastest-growing industrial enterprises in the US. Nox Group owns and operates Corbins, RMCI, Nox Innovations, and Construction Labels, and our teams set the standard as industry leaders. As we continue to expand our reach nationwide, we seek people who are passionate about personal growth and eager to make a positive impact throughout the industries and communities we serve. We prioritize our people, our partners, and our relationships. Start your journey today and join our skilled team. We are currently seeking a Quality Technician to support our QAQC Department team in Reno, Nevada. As a Quality Technician, you will play an essential role in ensuring our installations comply with National and City codes, customer design specifications, and Corbins' expectation of “First Class Work”. You will be supporting the most challenging and exciting projects in the Southwest, including commercial, industrial, mission-critical and water/wastewater treatment facilities. Responsibilities Develop an understanding of the electrical project scope, quality requirements, quality plan, and quality documents pertaining to the assigned scope of work including applicable codes and standards. Coordinate with operations to schedule and perform quality inspections and tests to maintain production goals. Prepare inspection/test reports and maintain the quality files related to area of responsibility. Verify inspection and test compliance with applicable contract documents, codes, and standards. Correctly interpret and utilize codes and industry standards to determine compliance of the work. Assist the project team with completion of required test documentation. Organize quality documents and store per the company and project document management procedures. Identify, report, and correct nonconforming work in accordance with the company quality standards and the Project Quality Plan. Perform receiving inspection of permanent materials and plant equipment for project requirements as needed. Be involved in and provide quality input to task planning meetings. Examine/inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed. Identify safety hazards you or other employees may be subject to and take all necessary corrective actions to eliminate or minimize hazards. Understand and respond appropriately to all safety hazards and warning devices (i.e. back-up alarms, smell of smoke, different colored warning tags, warning sirens) Understand and implement lockout/tagout procedures in safe manner. Qualifications 5+ years working in the industrial electrical industry. Experience maintaining effective communications (both orally and written) with supervisor, coworkers, and the project management team. Experience developing strong working relationship with supervisor, coworkers, and the project management team. Electrical code and standards knowledge Strong attention to detail and follow-through. Proficient in Microsoft Office software (Word, Excel, Outlook) Must be a self-starter, be organized, and have good interpersonal skills. Ability to complete tasks with minimal supervision. Ability to lift up to fifty pounds, unassisted, as required. Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary. Able to work a 40-hour work week, with overtime and off-hour shifts as required. Ability for stand for long periods of time in one place. Ability to walk jobsites throughout the day. Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location. Education/Certifications High school diploma or equivalent. Trade Certificate or college degree in education preferred or equivalent experience in construction training and development. Safety Level This is a safety sensitive position, and all applicable policies including drug test and background check will apply. The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to: Potentially lift up to 50 pounds Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing Potentially operate a motor vehicle, crane, tractor, etc. We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA) #NXCLIND1 It has been and continues to be the long-standing policy of any Nox Group operating company to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. In addition to federal law requirements, Nox Group and all of its subsidiaries comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Company Overview Hamilton Medical was founded in 1983 with a clear mission: to enhance the lives of patients on respirators and support the caregivers who serve them. Our focus is on developing ventilation technologies that prioritize safety, effectiveness, and lung protection. We are dedicated to easing the burden on healthcare professionals who work tirelessly every day, helping critically ill patients recover and regain their health. We are committed to helping medical teams deliver the best respiratory care ‑ to anyone, anywhere. Responsibilities Hamilton Medical is seeking a Quality Assurance Technician who will work with the Quality and manufacturing teams to support the production of medical equipment. This position is available during the swing shift: 3:30pm - 12:00am. Perform dimensional and visual inspections of various precision mechanical and electronic parts. Utilize appropriate measurement tools for assigned tasks. Generate and maintain inspection documents and files, clearly documenting inspection results, including resolutions and discrepancies. Assist Engineers in identifying and troubleshooting discrepant materials. Qualifications Thorough knowledge of good manufacturing practices. Strong technical skills. Excellent communication and documentation skills. Ability to follow written instructions accurately. Work seamlessly with peer group. Knowledge of basic quality assurance methods and principle. Education/Experience Must have a High School Diploma or GED; an Associate degree in Electronics, Biomedical Electronics Technology, or a certificate from an accredited electronics school is preferred, or an equivalent combination of education and experience. At least 1 year of quality assurance experience. About Hamilton Established, stable, and reliable company. Comprehensive benefits package: medical, dental, vision insurance; paid vacation and sick time; disability insurance; 401(k); tuition reimbursement; and more. Engaging and innovative design projects. Strong opportunities for professional growth. Commitment to sustainable design practices. Personal Protective Equipment (PPE) may be required (provided by employer). Drug and background screenings required. Equal Employment Opportunity - It is the policy of this organization to provide equal employment opportunities to all qualified applicants without regard to race, creed, color, national origin, sex, age 40 and over, disability, marital status, sexual orientation, gender identity, genetic information, citizenship status, religious preference, or veteran status in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations.

Health Carousel - Travel Allied is seeking a travel Cath Lab Technologist for a travel job in Reno, Nevada. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: 02/02/2026 Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel Health Carousel - Travel Allied Job ID #JO03970701. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Health Carousel - Travel Allied Health Carousel Allied Travel is a healthcare staffing brand dedicated to providing excellent travel assignments for allied healthcare professionals. We work closely with medical and care facilities across the United States to fill vacant positions with highly talented medical staff in places that make a difference. Benefits Weekly pay Holiday Pay 401k retirement plan Company provided housing options Wellness and fitness programs Mileage reimbursement Referral bonus Employee assistance programs Medical benefits Dental benefits Vision benefits Benefits start day 1 License and certification reimbursement Life insurance Discount program

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Reno, NV laboratory is looking for a Lab Technician to join their team! The Lab Technician I will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. The Lab Technician I works independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. The Lab Technician I always follows safe laboratory practices and maintains a safe working environment. Job Functions After appropriate training independently prepares samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologies Performs routine operation, maintenance, calibration of prep instruments/equipment May assist with validation and MDL studies. Inputs and maintains technical information as needed to support the laboratory functions/operations. Maintains Laboratory Notebook where applicable. Adheres to internal standards, policies, and procedures. Performs other duties as required. Qualifications High school diploma and 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required) Associates Degree in a Chemistry or similar scientific discipline and 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) English language skills (Required) Basic mathematical and reasoning skills (Required) Basic computer skills (Required) Ability to lift, carry, push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Coast Medical Service is a nationwide travel nursing & allied healthcare staffing agency dedicated to providing an elite traveler experience for the experienced or first-time traveler. Coast is featured on Blue Pipes' 2023 Best Travel Agencies and named a 2022 Top Rated Healthcare Staffing Firm & 2023 First Half Top Rated Healthcare Staffing Firm by Great Recruiters. Please note that pay rate may differ for locally based candidates. Please apply here or contact a recruiter directly to learn more about this position & the facility, and/or explore others that may be of interest to you. We look forward to speaking with you!

Job Description As a QC Inspector at Rocket EMS, you will play a vital role in ensuring that our high-reliability PCB assemblies adhere to the strictest quality standards. Your responsibilities will include conducting first article inspections, performing in-process audits, and monitoring production quality along the SMT line. This position demands meticulous attention to detail, a solid understanding of IPC standards, and the decisiveness to halt production when quality is jeopardized. Responsibilities Review job documentation (MPI, Deviations, ECOs, and Customer Requirements) prior to inspection. Conduct SMT First Article Inspections and verify compliance with IPC-A-610 (Class 2 and 3) and customer standards. Monitor throughput and quality on assigned lines; halt production if significant defects are identified and escalate issues promptly. Provide daily quality pass-down reports and keep leads/supervisors informed about inspection outcomes. Initiate and review Technical Inquiries for discrepancies; ensure no jobs commence without proper authorization. Assist in addressing bottleneck areas as directed by Supervisor, Engineer, or Manager. Escalate unresolved issues to the Quality Manager. Adhere to and enforce all procedures related to ESD, MSD handling, housekeeping, maintenance, safety, and inspection protocols. Propose and support continuous process and quality improvements. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years in an electronics inspection role within a contract manufacturing or similar environment. IPC-A-610 and/or J-STD-001 certification (required). Skills Strong understanding of IPC workmanship standards (Class 2 and 3). Ability to read and interpret blueprints, drawings, and BOMs. Basic computer skills (MS Word, Excel, Outlook). Excellent communication skills in English, both written and verbal. Detail-oriented with the capability to accurately identify and classify defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Growth opportunities in a cutting-edge electronics manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed

@HYVE Solutions, missions to help customers, business partners, and employees achieve success through shared goals, strategies, resources and technology solutions. @ HYVE Solutions, we believe employees are our greatest asset and we empower them to make a difference in our business. Diversity and inclusion make us all better. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

American Battery Technology Company (ABTC) is an industry-leading battery metals and critical material technology development and commercialization company. Our Pilot Plant just outside of Reno, Nevada will be the first integrated implementation of our multi-step processing train for the full mechanical processing, physical separation, chemical extraction, and production of commercial-scale battery metals that will be resold back into the battery manufacturing supply chain to enact a low-cost, low environmental impact, and domestically sourced closed-loop circular economy. We are seeking a highly motivated and detail-oriented Quality Technician to join our Li-ion battery recycling operation. This critical role reports directly to the Head of Quality and plays a vital part in ensuring the safety, quality, and efficiency of our battery disassembly, processing, and finished product quality. This position is for our D-shift staff, working nights, Thursday through Saturday, and every other Wednesday.

The Quality Technician performs quality control tests/inspections on products at various stages of production process. Duties require verbal and written communication ability, visual acuity to product detail, manual coordination to operate hand tools and testing equipment, ability to enter data in computer system and the physical ability to lift various weights. Essential Job Functions Performs quality check of printed, laminated and slit roll samples and pouches on a regular basis to verify Operator's result for dimension. Operates quality control testing equipment/tools. Collects and manages sample retained. Collaborate with Operator and Production Supervisor in ensuring product conformance during job set up for approval to run. Respond and assist Production and/or Quality Supervisor in verifying reported non-conformities for quick resolution or corrective action. Communicate deviation incidents to concerned personnel for corrective action. Place non-conforming raw materials, WIP & Finished products ON HOLD/Quarantine on Radius, update the Quality Log and communicate to concerned personnel. Assist Quality Supervisor in sampling and verification of internally quarantined and customer returned non-conforming materials to identify proper disposition. Generates and issues Certificate of Analysis directly to customer or save in the system. Communicates discrepancies of production documentations (WI, SOP, Layout, etc.) to Management and CSR for timely correction. Prints quality forms for production personnel if needed. Read and replies to e-mails in timely manner. Cooperate in the maintenance, cleanliness and organization of the Laboratory. Cooperate during root cause analysis to identify proper corrective & preventive action. Assist in collection, preparation and review of customer required samples. Perform filing of quality documents/records. Assist with team members with their responsibilities as needed or during their absence. Attend team meetings and feedback on any quality related issues/improvements. Assist in employee trainings, if required. Follow all established safety rules and regulations and utilize required safety equipment. Report defective equipment or unsafe conditions to the appropriate personnel. Maintain work area in a clean and orderly condition. Follow all company Good Manufacturing Practices & Policies. Perform other duties as required or as requested by Supervisor or Manager. Ability to work a flexible schedule if needed. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Skills and Knowledge Technical or vocational degree is a plus. Able to consistently act independently and prioritize work. Practical interpersonal and written communication skills Experience with ERP and other Maintenance Planning tools. Strong analytical and problem-solving skills Strong sense of ownership, work ethic, good judgment, and decision-making skills Familiar with Microsoft Office (Word, and Excel). Able to work in a fast-paced environment and multi-task effectively. Excellent organizational and prioritization skills. Excited about taking on new challenges in the manufacturing industry Self-motivated, hands-on, practical mindset, and capable of setting and reaching ambitious goals. Ability to work as part of a team and independently. Ability to collaborate and maintain Garlock's commitment to a Food Safe environment. Physical Requirements: While performing the duties of this job, the employee is regularly required to stand, walk, sit, and use hands to handle or feel. The employee frequently is required to talk or hear. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The noise level in the work environment is usually loud. Period lifting of pallets weight and material weighing up to 50lbs Squatting, crouching, turning, twisting, stretching, climbing steps, grabbing, pulling, pushing, and bending. Visual and hearing acuity within normal limits Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical environment of manufacturing and production facilities. Exposure includes but is not limited to continuous noise, scent of materials, bright workstations, machinery with moving parts. Other Details: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. It is the responsibility of all Employees to ensure that the product produced by Garlock Flexibles meets or exceeds the expectations for quality of Garlock Flexibles and their Customers. It is also the responsibility of all employees to ensure that the Hygiene of their work area meets or exceeds the standards set in Garlock Flexibles Good Manufacturing Practices Manual. 3rd Shift Sun-Thurs 11pm-7am 40 hours a week/Overtime as needed

Under the direction of the Quality Engineer the Quality Technician is responsible to assist the Quality Engineer with communication and resolution of Customer Concerns, Internal Audits/Control Plan Audits, launch activities, PPAP studies and related activities, and gauge maintenance. It is also the duty of the Quality Technician to drive containment actions to ensure that the quality and integrity of the product shipping to our customers is maintained. Responsibilities/Duties: Assist the Quality Engineers with communication of Quality Concerns to all shifts of the production team. This includes but is not limited to ensuring that quality alerts are posted, training has been completed and operators and all production team members have a firm understanding of the intent and expectation of the alert The Quality Technician should aid Quality Inspectors in making a decision to accept/reject product. In the absence of the Quality Engineer, the Quality Technician has the authority to determine the acceptability of a part based on the documented requirements for the program, visual aids and knowledge of part history. When a decision is made, a sample part should be saved and provided to the Quality Engineer to make a new boundary sample. If a decision cannot be made, it is the responsibility of the Quality Technician to elevate the issue to the Quality Manager. The Quality Manager will consult with the Production Manager and Engineering Manager to make a final determination and give feedback to the team. Assist production personnel with the coordination of all sort activities including the gathering of data and communication back to the Quality Manager and all appropriate members of management Maintain organization of all non-production samples and nonconforming material It is the responsibility of the Quality Technician to communicate any and all quality, reliability or system concerns up the chain of command to drive resolution. This includes reporting all findings from sorts, first off/periodic inspections, quality audits, general observation, etc. Organize/Oversee sorts related to customer or internal concerns. Train all personnel performing a sort, collect all sort data and provide feedback to Quality, Production and Engineering on sort findings. Maintain all gauges for cleanliness and timely certification including the contracting of outside resources as needed SG-FO-621-002 It is the user's responsibility to verify latest revision. REV. 11-01-18 Verify the availability and usefulness of visual aids and boundary samples/standards. Work with Quality Engineer to develop new samples where needed Train all Manufacturing operators and Supervisors (all affected personnel) on Quality Alerts. Provide completed training documents to the responsible Quality Engineer. Ensure the intent of the Quality Alert is understood and verify required actions are in place. Work with Quality Engineer for clarification of requirements where needed. Ensure all Quality Alerts are up to date, current and posted at the point of use Perform internal audits and control plan audits as determined by the Internal Audit schedule Assist Quality Engineer by performing and coordinating the performance of Capability Studies and Gauge R&R's Assist the Quality Engineer in gathering data for internal trials and run at rates. Oversee the activities of Quality Inspectors. The Quality Technician will be required to maintain in-person contact with each shift quality inspector Comply with safety regulations and maintain clean and orderly work areas (5S) Follow all clean up and housekeeping procedures (5S) i.e. production floor, shipping & receiving office and warehouse as needed Ability to communicate and understand verbal and written instructions in English Perform other duties as assigned or required Specific Knowledge, Skills, Licenses, Certifications, Etc: High school diploma/GED Minimum of one year experience in Quality Able to read part drawings/GD&T Working knowledge of Gauge R&R's and SPC methodologies People skills and the ability to relate to all levels of employees and management Knowledge in the use of Microsoft Word, Excel and Power Point Ability to work flexible hours Physical Requirements: Must be able to lift and move objects up to 35 pounds. Must be able to hear, talk, walk, stand, bend and sit, use hands to finger, handle, or touch office equipment and production environment such as gages & fixtures Vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus to work

As a QC Inspector at Rocket EMS, you will play a vital role in ensuring that our high-reliability PCB assemblies adhere to the strictest quality standards. Your responsibilities will include conducting first article inspections, performing in-process audits, and monitoring production quality along the SMT line. This position demands meticulous attention to detail, a solid understanding of IPC standards, and the decisiveness to halt production when quality is jeopardized. Responsibilities Review job documentation (MPI, Deviations, ECOs, and Customer Requirements) prior to inspection. Conduct SMT First Article Inspections and verify compliance with IPC-A-610 (Class 2 and 3) and customer standards. Monitor throughput and quality on assigned lines; halt production if significant defects are identified and escalate issues promptly. Provide daily quality pass-down reports and keep leads/supervisors informed about inspection outcomes. Initiate and review Technical Inquiries for discrepancies; ensure no jobs commence without proper authorization. Assist in addressing bottleneck areas as directed by Supervisor, Engineer, or Manager. Escalate unresolved issues to the Quality Manager. Adhere to and enforce all procedures related to ESD, MSD handling, housekeeping, maintenance, safety, and inspection protocols. Propose and support continuous process and quality improvements. Qualifications Education High school diploma or equivalent (required). Experience Minimum of 2 years in an electronics inspection role within a contract manufacturing or similar environment. IPC-A-610 and/or J-STD-001 certification (required). Skills Strong understanding of IPC workmanship standards (Class 2 and 3). Ability to read and interpret blueprints, drawings, and BOMs. Basic computer skills (MS Word, Excel, Outlook). Excellent communication skills in English, both written and verbal. Detail-oriented with the capability to accurately identify and classify defects. Benefits 401(k) with company match Medical, dental, vision, and life insurance Paid time off Growth opportunities in a cutting-edge electronics manufacturing environment Schedule 8-hour shift, Monday-Friday Overtime and weekends as needed