Quality control technician jobs in Stanford, CA

The Quality Control Associate will support the PTDA Bioassay US Testing Group by performing biochemical, immunological, and cell-based assays in support of clinical and commercial products. This role operates in a cGMP-regulated laboratory and supports process development, product characterization, stability, and lot release testing using established procedures. Key Responsibilities Perform biochemical, immunological, and cell-based bioassays Support process development, product characterization, stability, and lot release testing Review, verify, and release assay data (electronic and paper-based) Prepare reagents and maintain assay readiness Present assay results and monitor assay performance and quality Follow Good Documentation Practices (GDP) and ALCOA+ data integrity principles Perform routine laboratory maintenance and support 5S initiatives Comply with EHS safety requirements and cGMP standards Required Qualifications B.S. in Biological Sciences or related field 1-2 years of relevant experience in Quality Control Hands-on experience with immunological and/or cell-based assays Experience with aseptic cell culture Working knowledge of cGMP environments Ability to work independently and collaboratively in a fast-paced setting Strong attention to detail and ability to manage multiple priorities Effective written and verbal communication skills Technical & Systems Skills Proficiency with computer applications, data management, and electronic documentation Experience with GxP-compliant systems such as SoftMax Pro, LIMS, and Veeva QMS (preferred)

Hi Hope you are doing well ! This is Dipendra Gupta from Programmers.ai as we have an urgent open role below, please check and do let me know if you are comfortable with and looking for a new role or interested. Junior reliability lab Technician Mountain view CA -onsite ‘ Fulltime Job description: Develop and Execute Test Plans: Design and carry out comprehensive reliability test plans (e.g., thermal cycling, vibration, shock, humidity, burn-in, life testing) for new and existing products or equipment to simulate real-world operating conditions. Failure Analysis & Root Cause Determination: Conduct detailed failure analyses (FA) and root cause analyses (RCA) for failures identified during testing or in the field, implementing effective corrective actions and permanent solutions. Reliability Modeling & Prediction: Use statistical methods and software tools (e.g., Weibull analysis, Design of Experiments (DOE), FMEA) to predict future performance, model failure rates, and assess potential risks. Collaboration: Work closely with design, manufacturing, quality assurance, and maintenance teams to provide key input on "Design for Reliability" (DFR) and "Design for Maintainability" principles. Documentation & Reporting: Compile data, generate detailed reports, and communicate test results, findings, and recommendations to cross-functional teams and management Best Regards, Dipendra Gupta Technical Recruiter *****************************

Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in Corporate Sector, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, including Product Owners, Business Control Managers, and Regulators, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities Conduct in-depth reviews of existing processes for effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations. Lead development & implementation of formal processes, procedures, workflow automations to continuously optimize the team's resources to improve reliability, costs, and sustainability. Develop and maintain robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals. Execute reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work. Proactively monitor and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance. Develop and execute comprehensive project plans, incorporating technical requirements, resource allocation, and timelines to ensure on-time delivery of technology solutions Required qualifications, capabilities, and skills Formal training or certification in Information Technology, and/or 5+ years of technology, risk and controls knowledge. Strong leadership skills with exceptional communication and presence Advanced knowledge of multiple IT control and project management practices and experience working across large environments Ability to collaborate with high-performing teams and individuals throughout the firm to accomplish common goals Experience In Depth reviews of existing processes for effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations. In-depth knowledge and experience in Infrastructure and/or Application Risks and Controls Ability to independently use systems and analyze/use data to address/identify gaps in Controls, and highlight Risk Working experience in collaborating with engineering as well as business functions to achieve objectives and hold difficult conversations/escalations Preferred qualifications, capabilities, and skills Demonstrated ability to multi-task in a high-pressure environment Fast learner with an eye for detail CRISC, CISSP, or other industry-recognized risk certifications are preferred Audit experience preferable, but not mandatory

Job Details Dynatect Ro-Lab - Tracy, CA Dynatect Ro-Lab - Tracy, CA Full Time High School $25.00 - $25.00 Hourly QA - Quality ControlDescription INFORMATION Department: Quality Reports to: Quality Manager Work Hours: Full-Time (approx. 40-hour workweek, Shift 1 or 2) FLSA Status NON-EXEMPT DESCRIPTION: The Quality Technician is responsible for performing required inspections of vendor supplied and Dynatect manufactured parts. These inspections are performed using criteria from applicable drawings, standards, specifications, and any other internal or external specified requirements. The Quality Technician is responsible for communicating with respective departments, vendors and individual employees to troubleshoot quality and process related issues. Additionally, the Quality Technician will be responsible for assisting and finding solutions to assigned internal and external complaints and corrective actions, and for assistance with identifying material and process non-conformances. The Quality Technician will also assist with continuous improvement projects that mitigate risk and ensure a quality product is delivered to the customer. PRIMARY RESPONSIBILITIES: Work in a safe and courteous manner. Perform product inspections. Perform calibration activities. Assist with resolving material and process non-conformities. Assist with continuous improvement activities. Promote and encourage a quality mindset in other employees. Attend Quality team meetings as scheduled. SECONDARY RESPONSIBILITIES: Perform other duties as assigned. SUPERVISORY RESPONSIBILITIES: None. Qualifications SKILLS AND ABILITIES Ability to keep accurate records. Be able to multi-task in a fast-paced environment. KNOWLEDGE AND EXPERIENCE Minimum of 3 years' experience in a manufacturing environment. Familiar with quality control and data analysis. Ability to follow documented procedures and standards. Proficient in Microsoft Office. Familiar with measurement equipment and its functionality.

Quality Technician will report to the Receiving Quality team lead and have the final goal to support the development of business processes to ensure that Ryzen's Client's products and services provide a high level of quality that meets the defined standards and specifications and in the end, the customer expectations. You will be helping in establishing high quality standards and will ensure product quality standards are met through inspection, documentation, and process improvement activities across receiving quality operations. You will support quality management systems by conducting audits, performing root cause analysis, and implementing corrective actions while collaborating with cross-functional teams to maintain high-quality standards in manufacturing and services. In this role you will: Perform part and vehicle level quality inspection to ensure the product is meeting specifications. Process incoming material and validate conformance to established quality standards Document various procedures and work instructions Support creating and reporting metrics to demonstrate quality status in NPI, manufacturing, and services Enter test result data into SAP and JIRA systems Help in Root Cause Analysis activities, Corrective Action implementation and validation Support process improvement activities Work with cross-functional teams as needed Qualifications Bachelor's degree with 6- 8 years of experience in the manufacturing environment (automotive, semiconductor, or aerospace fields are preferred). Experience in performing Quality inspections based on control plan Experience with Root Cause Analysis, Problem Solving and Quality Control methods Must be familiar with Google suites (words, docs, sheets) Strong planning, organizational, analytical, interpersonal, decision-making, oral and written communication skills Bonus Qualifications Electrical component (wire harness) inspection experience Previous experience in SAP and/or JIRA system Industry background and/or experience in; automotive, software, contract manufacturing, customer management Pay Rate: $35.00/HR - $45.00/HR

Lyten is leading an industrial revolution through Lyten 3D Graphene, a breakthrough supermaterial unlocking a new generation of products - from lithium-sulfur batteries and energy storage systems to concrete admixtures, lightweight composites, and next-generation sensors that are revolutionizing industries. Together, these innovations are making a massive global improvement and driving real-world impact across energy, mobility, construction, and defense. At Lyten, we believe the most meaningful careers begin with purpose - and with people who want to make a difference. We're not just developing advanced supermaterials - we're about to change the world as we know it, reshaping how energy is stored, how products are built, and how progress is made. We're entering an exciting growth phase, scaling production across the U.S. and Europe and expanding our team of engineers, scientists, and innovators. Apply now to join our team and be part of something bigger than yourself - where collaboration, creativity, and purpose come together to build the technologies that will define the next century. Responsibilities: * Conduct detailed inspections of carbon materials and batteries at various stages of the production process to identify defects or deviations from quality standards. * Perform various tests on battery components and finished products, including but not limited to electrical, mechanical, and environmental tests, to ensure they meet specified requirements. * Analyze test data, prepare detailed reports on findings, and recommend corrective actions to address any identified issues. * Work closely with production teams to implement quality control measures and improve product quality. * Participate in root cause analysis for product failures and develop strategies to prevent future occurrences. * Train and guide production staff on quality control practices and the importance of adhering to standards. * Ensure compliance with all relevant safety and environmental regulations during testing and handling of materials Requirements & Qualifications: * Associate Degree in a technical field (or equivalent experience) * Receiving, Manufacturing and/or Battery experience are a plus. * Experience with SQL, Jira and Tableau are a plus. * Ability to read technical & engineering drawings * Ability to use a variety of precision measuring tools, including calipers, micrometers, Microscope, height gauge, optical measuring machines (OMM), coordinate measuring machines (CMM), etc. * Must have a good knowledge of Microsoft Office (Word, Excel, PowerPoint, SharePoint). Physical & Mental Requirements: * Must be able to sit, stand and use a computer for extended periods of time. * Must be able to communicate effectively. * Must be able to lift, up to 50 lbs. * No physical limitations to wear personal protective equipment (PPE), including respirators when required. * Must collaborate and work well with other team members. * Must be able to occasionally work in a dry room setting. Compensations Range: The expected base salary range for this position is between $26.00 - $39.00 The level of pay within the range will depend on a variety of job-related factors that may include location, relevant prior experience and/or education, or particular skills and expertise. Disclosures: Pay Transparency Disclosure: This compensation and benefits information is based on Lyten's estimate as of the date of publication and may be modified in the future. We generally do not negotiate on salary once we have made an offer. The level of pay within the range will depend on a variety of job-related factors that may include location, relevant prior experience and/or education, or particular skills and expertise. New hires joining the company tend to be paid within the starting base pay range noted above, with opportunities to increase pay over time based on development of additional skills, competencies, and company-specific knowledge. In addition to base pay this position is eligible for tier based bonus and equity, healthcare, dental, vision, corporate discounts, paid holidays, PTO and sick time, 401K, employee relocation plan (if applicable) Export/ITAR Compliance Disclosure: Certain positions within Lyten, Inc. require compliance with export control laws and, as a result, all interviewed candidates will be screened pre-interview to determine their eligibility in light of export restrictions. This position requires access to technology, software and other information that is subject to governmental access control restrictions, due to export controls. Employment in this position is conditioned on the continued availability of government authorization to authorize release of such items, to the extent required, including without limitation an export license, or other documentation required to establish authorization to receive access to such items. Company may delay commencement of employment, rescind an offer of employment, terminate employment, and/or may modify job responsibilities, compensation, benefits, and/or access to Company facilities and information systems, as Company deems appropriate, in order to ensure compliance with applicable government access control restrictions. Lyten is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, status as a protected veteran, or status as a qualified individual with a disability. EEO Employer/Vet/Disabled. IMPORTANT: Please be aware that fictitious job openings, consulting engagements, solicitations, interviews or employment offers may be circulated on the Internet in an attempt to obtain privileged information, or to induce you to pay a fee for services related to recruitment or training. Lyten Does NOT charge any application, processing, or training fee at any stage of the recruitment or hiring process. We Do NOT use any messaging apps to recruit or communicate at any time during the recruiting process. Links to the actual job posting will be provided in the email, please verify the position is posted prior to communicating. All genuine job openings will be posted on our careers page and all communications will be from the recruiting team and will be from ************ email address. Principals only; third party or agency submitted candidates will not be considered. Why Work at Lyten At Lyten, you'll be part of a team that's redefining what's possible in energy, materials, and manufacturing. We're not just imagining the future - we're building it today with breakthrough technologies that are changing how products are made and how industries innovate. Our people are the heart of that mission. From world-class scientists and engineers to creative problem-solvers in operations, manufacturing, and commercialization, every member of the Lyten team plays a role in turning bold ideas into real-world impact. We believe that the best work happens when you're doing great things in the world - with people you like. Collaboration, curiosity, and a shared sense of purpose drive everything we do. What You'll Find at Lyten * A mission that matters: Contribute directly to solving complex challenges in energy, mobility, and materials innovation. * Cutting-edge innovation: Work on technologies at the intersection of materials science, energy storage, and advanced manufacturing that strengthen energy security and local supply chains. * Extraordinary people: Join a team of talented, friendly, and down-to-earth innovators who support, challenge, and inspire one another every day. * Teamwork and culture: Experience a workplace built on trust, respect, and shared success - where collaboration fuels breakthroughs and everyone's ideas are heard. * Global impact: Help scale new materials and energy solutions that reinforce industrial resilience across the U.S. and Europe. * Career growth: Be part of a fast-moving company entering a commercial growth phase, with opportunities to lead, learn, and make your mark. * Purpose-driven values: Thrive in an environment that celebrates ingenuity, optimism, and meaningful progress - together. Lyten offers the opportunity to do the most important work of your career - helping build the technologies that will power the next century of innovation. Join us, and help transform industries, communities, and the planet with friends who share your drive to make a difference.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Salary Range: the base salary range for this role is between $28.00 to $32.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Figure is an AI Robotics company developing a general purpose humanoid. Our Humanoid is designed for commercial tasks and the home. We are based in San Jose, CA and require 5 days/week in-office collaboration. It's time to build. The Incoming Quality Technician will verify that incoming and in-process material meets Figure AI drawings and specifications. They will be responsible for the inspection of material and the coordination of MRB activities, including data input, reporting, and logistics associated with material dispositions. This person will also administer the calibration system, ensuring that measuring and test equipment is within its calibration due date. The Incoming Quality Technician will work closely with SQE to provide reports, charts, graphs, etc., to monitor and improve incoming material product quality. The successful candidate must have the ability to meet tight deadlines, possess strong interpersonal and communication skills, be detail-oriented, and be able to work independently. The candidate must establish and maintain a professional working relationship with line supervisors, operators, and other shop floor stakeholders Responsibilities * Perform visual and dimensional inspection on supplied electronics PCBA (printed circuit board assemblies), EE components, and harness to ensure they meet quality standards, using tools like microscopes and calipers, and pin gauges. This includes checking for defects like solder flaws, incorrect component placement, wrong components, solder mask, conformal coating, cosmetic issues, and documenting all findings according to criteria per engineer requirements, IPC-A-610, IPC-A-620, and J-STD-001. * The role also requires reporting nonconformities, collaborating with production and engineering teams to resolve problems, and maintaining inspection records. Document and relay nonconformance information following MRB process conduct first article inspection and generate first article inspection reports in compliance with ISO9001 (as required). Requirements * High-school diploma or GED plus three (3) years of on-the-job experience in electronics assembly manufacturing. * Comprehension of IPC-610, IPC-A-620, and J-STD-001 standards - certification preferred. * Understand traceability (product, material and calibration) Ability to work within a team environment. * 3-5 years of experience in a Manufacturing Quality Control environment * Knowledge of ISO 9001:2000 or TS16949 is a plus * Ability to read and interpret basic mechanical drawings * Able to use basic measurement tools such as pin gauges, bore gauges, calipers, microscope, and micrometers. * Proficient in Microsoft Office or Google Suite * Must have command of the English language, both written and verbal Desired General use of Keyence, CMM, OMM, Faro Arm and Romer Arm Experience with digital X-Ray inspections. First Article Inspection Requirement Understanding basic statistical terms and techniques, how to plot data and how to recognize out-of-control conditions ASQ Certified Quality Inspector Certificate. The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

Working in a team of media process technicians, media process technician I will manufacture dehydrated and liquid cell culture media. Formulation technician will be able to follow batch record instructions and will be expected to weigh microgram to kilograms quantities of individual raw materials, calibrate equipment, follow safety policies and procedures, operate milling equipment, perform sterile filtration and any other tasks required to complete cell culture media manufacturing. Standard product testing, such as osmolality, pH and turbidity, will also be performed in this job. This position works closely with R&D, procurement, quality, process technology, marketing as well as external and internal customers and vendors RESPONSIBILITIES: Responsible for the staging and compounding of raw materials within weight tolerances (e.G. Micrograms to kilograms), milling, blending, aseptic liquid filling, process control monitoring and documentation of such procedures for manufacturing dehydrated culture media and liquid media in accordance with production schedules following the appropriate GMP and department procedures Completes all required documentation neatly, accurately, and in accordance with GMP. Performs cleaning, inspection, calibration and assists in the maintenance of equipment. Maintains related logs and records. Performs equipment troubleshooting. Handles raw materials per GMP and Safety requirements. Uses equipment such as pipettors, balances, osmometer, turbidimeter and pH meters. Ensure that tasks are performed in a safe and responsible manner to create an injury free and incident free workplace Required to follow through on assigned responsibilities and able to function under supervision. Responsible for promoting positive team environment through good communications and team engagement. May be required to work overtime. Performs other duties as assigned in support of business goals QUALIFICATION REQUIREMENTS: Minimum of High School Diploma or equivalent. Minimum of 6 months experience in a high-paced laboratory environment or manufacturing facility. Equivalent combination of education, training, and relevant work experience maybe considered. Must be able to read, write, and follow testing and inspection procedures. Must be able to maintain neat, accurate and complete records and logs. Mechanical aptitude and ability to disassemble and reassemble various equipment. Good communication skills and ability to work both individually and as part of a team. Flexibility with departmental work schedules including overtime. Must be able to focus with continuous attention to detail. Basic experience in weighing multiple components is required. Basic proficiency with PCs (Personal Computers) and use of Windows applications such as MS Excel, MS Word and MS PPT is required. Statistical analysis using mathematical spreadsheets such as Excel or Minitab is highly desired. Must be able to lift or move approximately 40lbs Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

TekWissen provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each clients requirements and span the services spectrum from Application Development/Maintenance, testing, IT Consulting & staffing for IT Infrastructure Management through strategic consulting and industry oriented Business Process. Our end-to-end Business Process as a Service (BPaaS) solutions support complex, high-value, knowledge based work. Combining applications, platforms, infrastructure, knowledge processes, and domain expertise allows us to deliver greater efficiencies and innovative business capabilities. Qualifications Position:Quality Technician III Location:San Jose,CA Pay Rate : $30.00 - $35.00/hr. Essential Duties & Responsibilities: * With limited supervision, assures policies, procedures, inspection techniques and quality plans conform to established standards * Performs complex analyses and tests of raw materials, packaging materials and/or finished products from manufacturing to ensure quality standards and compliance to customer and regulatory requirements * Monitors performance of inspectors and institute corrective action when necessary * Trains new inspectors and department personnel on policies, procedures, inspection techniques and quality plans * Assures gauges are within the current calibration cycle and are properly used and stored. Arranges for repair of gauges as needed. * Participates in design of experiments and process capability studies * Reviews Statistical Process Control (SPC) data. Maintains integrity of SPC data by correcting input errors and follows up with retraining of inspectors if needed. * 4+ years related experience and/or training * Experience certifying typical metrology equipment such as calipers, micrometers and computer controlled gauging equipment * General knowledge of blue prints, engineering specifications interpretation, inspection using measuring and test equipment, including CMM, FARO ARM and measurement techniques, geometric dimensioning and tolerance and quality calibration processes required. Additional Information If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest, please call me ASAP at ************ Thanks & Regards, Monika

Mon-Fri 6a - 230pm Formulation Technician Work in a team-based environment within a manufacturing lab responsible for synthesizing and testing ion exchange media used in chromatography consumables. As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a Key Responsibilities: * Perform testing and qualification of resin products on specialized instruments to meet customer demand. * Record and report test results accurately and maintain proper documentation. * Complete complex production work-orders according to established procedures. * Analyze data, derive conclusions, and prepare reports based on findings. * Collaborate with cross-functional teams. * Adhere to ISO 9001 guidelines and corporate quality policy to ensure high-quality standards. * Follow EH&S safety requirements and actively participate in safety improvement activities. * Continuously identify areas for improvement and propose countermeasures. * Maintain a clean and organized laboratory environment. Knowledge, Skills and Abilities: * Knowledge of Good Laboratory and Manufacturing Practices and standards. * Proficiency in Microsoft Office: Excel, Word, PowerPoint. * Good mathematical, problem-solving, and organizational abilities. * Excellent communication skills (verbal and written). * Ability to read and understand written procedures (SOPs) and follow verbal instructions. * Strong punctuality and attendance record. * Familiarity with hand tools regularly used (wrenches, torque drivers, tweezer, etc.) * Willingness to learn and apply Lean manufacturing and PPI Continuous Improvement tools. * Ability to work independently with occasional assistance. * Ownership mentality and ability to meet established deadlines and targets. * Willingness to acquire new knowledge and skills. * Understanding of production schedules and ability to prioritize tasks accordingly. * Hands-on experience in a Chemistry laboratory is preferred. * Knowledges of Chromatography software a plus. Education * At least 1+ years of experience in manufacturing environment * A bachelor's in chemistry and or biotechnology preferred. Physical requirements: * Ability to lift and/or move up to 40 pounds. * Regularly required to stand; walk; use hands & finger to handle & feel. * Frequently required to sit and reach with hands and arms. * Specific vision abilities required by this job include close vision, color vision and ability to adjust focus. * Work Environment: While performing the duties of this job, the employee is regularly exposed to toxic or caustic chemicals. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate. Personal protective equipment's: * Job requires wearing lab coats, Safety glasses, gloves & safety shoes all company provided. Non-Negotiable Hiring Criteria: * Must be in compliance with GMP, QSRs, ISO and IVD regulations in the performance of department responsibilities. * Ability to read and write English and understand instructions written or orally in English. * Ability to add, subtract, multiply and divide in all units of measure, whole numbers, fractions and decimals. * Knowledge of Word, Excel and Outlook. Job Type & Location This is a Contract position based out of Sunnyvale, CA. Pay and Benefits The pay range for this position is $28.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Sunnyvale,CA. Application Deadline This position is anticipated to close on Dec 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

To apply for this position, please click on Submit and follow instructions. Position is open to Veterans, transitioning military, members of the Nation Guard and MilSpouses. At CAES by Honeywell, we engineer solutions for the world's most critical missions. We serve customers in the defense and aerospace markets. Seeking a career that offers challenging, diverse projects and opportunities? Looking for a position with a company that offers long-term professional advancement? Searching for a place that values a diverse, team-based environment? One that values YOU. Consider CAES. The most important thing we build is TRUST Overview The Inspector, as part of CAES's Quality Assurance Group in San Jose, CA, is responsible for incoming mechanical and piece part inspection for MIL-STD-38534 microwave hybrid circuits. The position requires working closely with Production, Engineering, and Purchasing, with a focus on incoming inspection. In order to do so, we expect the person in this role to partner with fellow inspectors and their direct supervisor. Previous machining experience is a plus. You will be working with an inspection team whose purpose is preventing defective materials and parts from being used in manufacturing. Responsibilities Follow inspection plan documents to verify acceptance or rejection of parts and materials Interpret Documents and Drawings per ASME Y14.5 for inspection requirements Use of mechanical inspection tools to measure machined & plated parts with complex geometries and fine tolerances Perform first article inspection on machined & plated parts in accordance with AS9102 industry requirements Evaluate test or analysis data against specifications to determine acceptance Interpret workmanship standards and identify visual defects and anomalies Perform various types of data entry as part of product acceptance completion or job tracking Maintain accurate & detailed inspection records Communicate effectively with supervision and internal customers in person, on the phone, and through email Proactively address and resolve issues Additional Qualifications/Responsibilities Qualifications Minimum: High school Diploma/GED 1+ years' experience with low & high power microscope inspection, basic dimensional inspection tools: drop gages, plug & block gages, calipers, vernier micrometers 1+ years' experience reading and interpreting documents and drawings Experienced with MS Office Suite (Word, Excel, Outlook) This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a “US Person” under US export laws (or eligible for approval under a U.S. Government export license) Preferred: Strong written and verbal communication skills Detail-oriented mind-set Proficient with MS Office Suite (Word, Excel, Outlook) 1+ years' experience performing and reporting first article inspections in accordance with AS9102 industry requirements Ability to obtain & maintain a US DoD Security Clearance Be able to work OT as needed Familiar with ERP systems such as SAP Desired Experience/Certifications: Machine Tool Technology (MTT) or Geometric Design & Tolerancing (GD&T) formal training or certification Experience utilizing Net-Inspect first article software CMM programming experience using CMM-Manager software Experience inspecting various part types including machined chassis and housings used for electronic or microwave assemblies in aerospace applications Salary Range: $22.00 - $25.00 hourly (Level I). Applicable pay within the posted range may vary based on factors including, but not limited to, geographical location, job function of the position, education, and experience of the successful candidate.

Shift: 3rd shift, graveyard (shift begins: 10pm) Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction. Key Responsibilities: * Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards * Working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part * May evaluate new procedures for non-standard rest and perform special set-up on new equipment * Assist others in correcting or preventing deficiencies in quality or workmanship * Give work direction to other inspectors * Know your customers' expectations and drive action to meet them * Perform first article process * Identify component * Perform related work as assigned Job Qualifications: Education: Secondary/High School, Certificate Diploma Experience: 6+ Years preferably in Quality a plus Required skill: * PCBA Experienced * Able to use measurement equipment. * Must be able to read ECO/Dev instruction/build drawer and BOM. * Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process. Job Competencies: * Attention to detail * Communication skills - verbal and written * Organized and good critical thinking skills * Data collection, management and analysis * Team work * Ability to interpret complex customer rules and regulations * Demonstrated skills in project management and ability to train others to lead projects * Works well independently * Excellent interpersonal and communication skills * Ability to manage time and prioritize multiple task in a fast paced environment * Proficient in use of MS Office applications * Knowledge of Lean manufacturing fundamentals FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic

As a Quality Control Technician, you will work various parts of the facility taking samples and testing them in Moss Landing, CA! Experience with quality control and inspection of food is preferred! The ability to read and write in English! Bilingual in English & Spanish is preferred! Job Duties: Walk various parts of the facility to take samples and measurements of products. Use the lab to run tests and sample products. Complete timely reports of the samples taken and report any malfunctions. Other duties if finished with Quality Control Pay: Varies on experience Shift: Varies Hours: Varies Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun Safety and attendance incentives. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website, *********************** Please select a branch near you or call our office at ************ Stop in and see our experienced, bilingual, and friendly staff today at 8021 Kern Ave., Gilroy, CA 95020 Advance Services is an equal opportunity employer #cm3

Job Description FQC (Final Quality Control) San Jose, CA About the job: FULL-TIME/TEMPORARY (POSSIBILITY FOR PERMANENT) About the JobFoxconn Industrial Internet (Fii), is a world leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools and industrial robots. FII provides customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform. As a FQC you will be mainly responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality Control Technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met. QUALIFICATIONS: EDUCATION: High school diploma or GED equivalent and/or training or equivalent combination of education and experience EXPERIENCE: Minimum of 1-2 years of experience in a manufacturing environment LANGUAGE: English proficiency is required, Mandarin proficiency is a plus. SKILLS: Great verbal and written communication skills Familiarity with electronic and mechanical components related to PCBA contract manufacturing Accuracy for documentation Effectively present information and respond to questions from managers and employees Common sense to solve practical problems Knowledge of ESD, IPC-600/610, workmanship standards and experience Attention to detail RESPONSIBILITIES: Use basic inspection tool/device, example: magnifying lens, microscope, caliper, and color pantone Maintains safe and clean working environment by complying with procedures, rules, and regulations Inspect materials or assembled parts or products for defects and deviations from specifications Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments Discuss inspection results with those responsible for products Discard or reject products, materials, and equipment not meeting specifications Contributes to team effort by accomplishing related results as needed Develop and maintain inspection reports Ensure compliance to federal and state laws, as well as company standards and specifications Maintain calibration of quality control equipment Perform inspections across all stages of of production Prepare and maintain test data for review Evaluate data and draft reports, noting any relevant deviations from existing standards Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns with urgency Pay rate: $22/h Status: Non-Exempt Work schedule: Swing shift: 3:15PM - 11:45PM Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR vj Ac8GA8kM

75 W Valpico Road, Tracy, California 95376 Work Shift: 8hr-1st Shift (United States of America) The Quality Technician will audit, test and measure finished goods to ensure customer standards are met as well as follow our company's Good Manufacturing Practices. JOB SUMMARY: The Quality Technician will audit, test and measure finished goods to ensure customer standards are met as well as follow our company's Good Manufacturing Practices. ESSENTIAL DUTIES & RESPONSIBILITIES: * Ensure compliance with corporate and plant safety standards and with applicable laws and regulations issued by regulatory agencies. * Apply statistical tools and techniques to monitor plant performance and finished goods. * Complete laboratory testing and collect samples at established intervals. * Continually seek process improvements and make recommendations to management. * Audit compliance with GMP policies. * Performs process inspections during molding, packaging and loading. * Audit for compliance to control plan requirements including process parameters. * Perform incoming inspection of raw materials. * Complete dimensional checks and report on product. * Perform in-process inspections of manufactured product during molding, packaging and loading. * Perform cycle counts and/or inventory of finished goods as required. * Communicate quality issues and out of specifications conditions to appropriate personnel and with shift leaders. * Other duties as assigned by management. * Reasonable mandatory overtime may be required due to business needs. Qualifications: The requirements listed below are minimum requirements for the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: * The technician position requires a high school diploma or its equivalent. * One year of related experience. * ASQ certification or equivalent preferred Competencies: * Safe work practices * Influencing skills * Knowledge of basic statistics * Metrology skills including calibration * Able to manage multiple priorities & meet deadlines * Good computer skills * Uses logical approach to problem solving in Production & Continuous Improvement * Understands the role of Quality in a manufacturing organization and a Quality Operating System Targeted Pay Rate: $21.00 Altium Packaging, Our Culture Differentiates Us! We incorporate our Guiding Principles into all aspects and at all levels of the organization and use them as a framework for decision-making. We believe our Guiding Principles foster a culture of excellence that benefits both employees and customers. Our Guiding Principles * Act with Integrity & in Compliance * Drive Value Creation * Be Disciplined Entrepreneurs * Focus on the Customer * Act with Humility * Treat others with Dignity and Respect * Seeking Fulfillment in your Work We Believe in Rewarding our Most Important Resource - Our People! We show our commitment to Total Rewards by providing a competitive, comprehensive benefits package. In addition to medical, dental and vision plans, company holidays and vacation days, tuition reimbursement, learning and training opportunities, bonus potential, and a 401(k) plan with company contributions, Altium Packaging locations offer rewards and recognition programs and opportunities to make a difference in the community. EEO Statement We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Take your career to the next level at Altium Packaging!

Senior Formulation Technician Duration: 12 Months Job Type: Temporary Assignment Work Type: Onsite Shift: First Shift - 06:00 AM to 02:30 PM Pay Rate: $20 to $22 per hour Overview: TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients worldwide. The job opportunity is for one of our clients specializing in biotechnology product development services. Our client is dedicated to supplying laboratory equipment, chemicals, supplies, and services essential in healthcare, scientific research, safety, and education. As the global leader in serving the field of science, our client boasts an annual revenue of around $40 billion with a mission to empower customers to make the world healthier, cleaner, and safer. Our client's global team is committed to delivering an unparalleled blend of cutting-edge technologies, convenient procurement options, and pharmaceutical services under their industry-leading brands. Summary: The Media Process Technician I works as part of a team to manufacture dehydrated and liquid cell culture media. The technician follows batch record instructions, weighs raw materials ranging from micrograms to kilograms, calibrates equipment, operates milling equipment, performs sterile filtration, and completes media manufacturing tasks. Responsibilities also include performing standard product testing (osmolality, pH, turbidity) and working closely with cross-functional groups such as R&D, procurement, quality, process technology, marketing, as well as internal/external customers and vendors. Responsibilities Stage and compound raw materials within specified weight tolerances (micrograms to kilograms). Perform milling, blending, aseptic liquid filling, and process control monitoring. Follow GMP and departmental procedures to manufacture dehydrated and liquid culture media according to production schedules. Complete all required documentation neatly, accurately, and in compliance with GMP. Perform cleaning, inspection, calibration, and assist in equipment maintenance; maintain logs and records. Troubleshoot equipment issues. Handle raw materials following GMP and Safety requirements. Use laboratory and production equipment (pipettors, balances, osmometer, turbidimeter, pH meters). Work safely to maintain an injury-free and incident-free workplace. Carry out assigned responsibilities under supervision. Promote a positive team environment through effective communication and engagement. Work overtime when required. Perform other duties as assigned to support business goals. Required Skills & Qualifications BS in Chemistry or related field (or equivalent combination of education, training, and experience). Minimum 6 months of experience in a high-paced chemistry lab or manufacturing environment. Ability to read, write, and follow testing and inspection procedures. Ability to maintain neat, accurate, complete records and logs. Mechanical aptitude; ability to disassemble and reassemble equipment. Good communication skills; able to work independently or as part of a team. Flexibility to work varying schedules, including overtime. Strong attention to detail and ability to focus on tasks continuously. Basic experience weighing multiple components. Basic computer skills, including MS Excel, Word, and PowerPoint. Ability to lift or move approximately 40 lbs. Desired Skills (Preferred but Not Required) Statistical analysis experience using Excel or Minitab. Experience handling multiple components and performing precise weighing. Familiarity with GMP environments, sterile filtration, and laboratory instrumentation. TekWissen Group is an equal opportunity employer supporting workforce diversity.

Shift: Mon-Fri 6a - 230pm Duration: 12 Months Pay range: $28.00 Hourly - $28.00 Hourly Onsite Job Work in a team-based environment within a manufacturing lab responsible for synthesizing and testing ion exchange media used in chromatography consumables. Key Responsibilities: •Perform testing and qualification of resin products on specialized instruments to meet customer demand. •Record and report test results accurately and maintain proper documentation. •Complete complex production work-orders according to established procedures. •Analyze data, derive conclusions, and prepare reports based on findings. •Collaborate with cross-functional teams. •Adhere to ISO 9001 guidelines and corporate quality policy to ensure high-quality standards. •Follow EH&S safety requirements and actively participate in safety improvement activities. •Continuously identify areas for improvement and propose countermeasures. •Maintain a clean and organized laboratory environment. Knowledge, Skills and Abilities: •Knowledge of Good Laboratory and Manufacturing Practices and standards. •Proficiency in Microsoft Office: Excel, Word, PowerPoint. •Good mathematical, problem-solving, and organizational abilities. •Excellent communication skills (verbal and written). •Ability to read and understand written procedures (SOPs) and follow verbal instructions. •Strong punctuality and attendance record. •Familiarity with hand tools regularly used (wrenches, torque drivers, tweezer, etc.) •Willingness to learn and apply Lean manufacturing and PPI Continuous Improvement tools. •Ability to work independently with occasional assistance. •Ownership mentality and ability to meet established deadlines and targets. •Willingness to acquire new knowledge and skills. •Understanding of production schedules and ability to prioritize tasks accordingly. •Hands-on experience in a Chemistry laboratory is preferred. •Knowledges of Chromatography software a plus. Education •At least 1+ years of experience in manufacturing environment •A bachelor's in chemistry and or biotechnology preferred. Physical requirements: •Ability to lift and/or move up to 40 pounds. •Regularly required to stand;walk;use hands & finger to handle & feel. •Frequently required to sit and reach with hands and arms. •Specific vision abilities required by this job include close vision, color vision and ability to adjust focus. •Work Environment: While performing the duties of this job, the employee is regularly exposed to toxic or caustic chemicals. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate. Personal protective equipment's: •Job requires wearing lab coats, Safety glasses, gloves & safety shoes all company provided. Non-Negotiable Hiring Criteria: •Must be in compliance with GMP, QSRs, ISO and IVD regulations in the performance of department responsibilities. •Ability to read and write English and understand instructions written or orally in English. •Ability to add, subtract, multiply and divide in all units of measure, whole numbers, fractions and decimals. •Knowledge of Word, Excel and Outlook. Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

Mon-Fri 6a - 230pm Senior Formulation Technician Work in a team-based environment within a manufacturing lab responsible for synthesizing and testing ion exchange media used in chromatography consumables. As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a Key Responsibilities: • Perform testing and qualification of resin products on specialized instruments to meet customer demand. • Record and report test results accurately and maintain proper documentation. • Complete complex production work-orders according to established procedures. • Analyze data, derive conclusions, and prepare reports based on findings. • Collaborate with cross-functional teams. • Adhere to ISO 9001 guidelines and corporate quality policy to ensure high-quality standards. • Follow EH&S safety requirements and actively participate in safety improvement activities. • Continuously identify areas for improvement and propose countermeasures. • Maintain a clean and organized laboratory environment. Knowledge, Skills and Abilities: • Knowledge of Good Laboratory and Manufacturing Practices and standards. • Proficiency in Microsoft Office: Excel, Word, PowerPoint. • Good mathematical, problem-solving, and organizational abilities. • Excellent communication skills (verbal and written). • Ability to read and understand written procedures (SOPs) and follow verbal instructions. • Strong punctuality and attendance record. • Familiarity with hand tools regularly used (wrenches, torque drivers, tweezer, etc.) • Willingness to learn and apply Lean manufacturing and PPI Continuous Improvement tools. • Ability to work independently with occasional assistance. • Ownership mentality and ability to meet established deadlines and targets. • Willingness to acquire new knowledge and skills. • Understanding of production schedules and ability to prioritize tasks accordingly. • Hands-on experience in a Chemistry laboratory is preferred. • Knowledges of Chromatography software a plus. Education • At least 1+ years of experience in manufacturing environment • A bachelor's in chemistry and or biotechnology preferred. Physical requirements: • Ability to lift and/or move up to 40 pounds. • Regularly required to stand; walk; use hands & finger to handle & feel. • Frequently required to sit and reach with hands and arms. • Specific vision abilities required by this job include close vision, color vision and ability to adjust focus. • Work Environment: While performing the duties of this job, the employee is regularly exposed to toxic or caustic chemicals. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate. Personal protective equipment's: • Job requires wearing lab coats, Safety glasses, gloves & safety shoes all company provided. Non-Negotiable Hiring Criteria: • Must be in compliance with GMP, QSRs, ISO and IVD regulations in the performance of department responsibilities. • Ability to read and write English and understand instructions written or orally in English. • Ability to add, subtract, multiply and divide in all units of measure, whole numbers, fractions and decimals. • Knowledge of Word, Excel and Outlook. Job Type & Location This is a Contract position based out of Sunnyvale, CA. Pay and Benefits The pay range for this position is $28.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Sunnyvale,CA. Application Deadline This position is anticipated to close on Dec 31, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.