Quality control technician jobs in Stuart, FL - 170 jobs

Ro is a direct-to-patient healthcare company with a mission of helping patients achieve their health goals by delivering the easiest, most effective care possible. Ro is the only company to offer nationwide telehealth, labs, and pharmacy services. This is enabled by Ro's vertically integrated platform that helps patients achieve their goals through a convenient, end-to-end healthcare experience spanning from diagnosis, to delivery of medication, to ongoing care. Since 2017, Ro has helped millions of patients, including one in every county in the United States, and in 98% of primary care deserts. Ro has been recognized as a Fortune Best Workplace in New York and Health Care for four consecutive years (2021-2024). In 2023, Ro was also named Best Workplace for Parents for the third year in a row. In 2022, Ro was listed as a CNBC Disruptor 50. As a Quality Control (QC) Pharmacy Technician, you will be the on-site subject matter expert for quality control activities at our 503a compounding pharmacy located in Boynton Beach, FL. This role is responsible for quality oversight activities that ensure compounded processes are well documented and that products are handled and tested per facility SOPs. This position will be responsible for record review, raw material receipt and testing, product retains, product sampling and testing, lot release, and environmental monitoring. You will partner closely with pharmacy operations to ensure the pharmacy location maintains a high level of quality and compliance. This role will report to the Manager, Corporate Quality - Pharmacy on the Clinical team. What You'll Do * Support QC oversight for compounding operations. * Assist with development, support implementation, and maintain SOPs, Forms, Work Instructions and other required controlled documents. * Own the finished product retain program, ensuring a sample of each compounded lot is retained per SOP. * Conduct reviews of cleaning logs, compounding records, and other controlled records created throughout the facility. * Assist in root cause investigations and continuous quality improvement initiatives. * Assist in the execution of training on quality topics, functioning as the on-site SME for quality. * Provide Pharmacy Compliance with requests arising from pharmacy inspections. * Ensure the highest quality and cleanliness of the facility and equipment, leading our environmental monitoring program. * Conduct Quality Assurance checks on relevant product batches according to predefined guidelines, reviewing final test results to perform lot release. What You'll Bring to the Team * Bachelor's degree in any science discipline, preferred. * Current pharmacy technician license in Florida or the ability to obtain pharmacy technician licensure, preferred. * At least 3 years experience working in a manufacturing production environment or a high volume compounding pharmacy required. * Experience working in a cGMP or 503B facility where PPE, cleanliness, and sterile sampling techniques are part of daily routine, required. * Experience identifying need for and assisting in the creation of SOPs and other controlled documents. * Knowledge of environmental monitoring in cGMP environments. * Experience with Good Documentation Practices, preferred. * Experience training others, preferred. * Strong attention to detail and ability to think strategically and tactically. * Outstanding written and verbal communication skills. * Irrational passion for building the future of healthcare with an emphasis on quality processes to drive successful patient outcomes. We've Got You Covered * Full medical, dental, and vision insurance + OneMedical membership * Healthcare and Dependent Care FSA * 401(k) with company match * Flexible PTO * Wellbeing + Learning & Growth reimbursements * Paid parental leave + Fertility benefits * Pet insurance * Student loan refinancing * Virtual resources for mindfulness, counseling, and fitness We welcome qualified candidates of all races, creeds, genders, and sexuality to apply. The target hourly rate for this position ranges from $30.43 to $36.78, in addition to a competitive equity and benefits package (as applicable). When determining compensation, we analyze and carefully consider several factors, including location, job-related knowledge, skills and experience. These considerations may cause your compensation to vary. Ro recognizes the power of in-person collaboration, while supporting the flexibility to work anywhere in the United States. For our Ro'ers in the tri-state (NY) area, you will join us at HQ on Tuesdays and Thursdays. For those outside of the tri-state area, you will be able to join in-person collaborations throughout the year (i.e., during team on-sites). At Ro, we believe that our diverse perspectives are our biggest strengths - and that embracing them will create real change in healthcare. As an equal opportunity employer, we provide equal opportunity in all aspects of employment, including recruiting, hiring, compensation, training and promotion, termination, and any other terms and conditions of employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, gender expression, familial status, age, disability and/or any other legally protected classification protected by federal, state, or local law. See our California Privacy Policy here.

Job DescriptionRo is a direct-to-patient healthcare company with a mission of helping patients achieve their health goals by delivering the easiest, most effective care possible. Ro is the only company to offer nationwide telehealth, labs, and pharmacy services. This is enabled by Ro's vertically integrated platform that helps patients achieve their goals through a convenient, end-to-end healthcare experience spanning from diagnosis, to delivery of medication, to ongoing care. Since 2017, Ro has helped millions of patients, including one in every county in the United States, and in 98% of primary care deserts. Ro has been recognized as a Fortune Best Workplace in New York and Health Care for four consecutive years (2021-2024). In 2023, Ro was also named Best Workplace for Parents for the third year in a row. In 2022, Ro was listed as a CNBC Disruptor 50. As a Quality Control (QC) Pharmacy Technician, you will be the on-site subject matter expert for quality control activities at our 503a compounding pharmacy located in Boynton Beach, FL. This role is responsible for quality oversight activities that ensure compounded processes are well documented and that products are handled and tested per facility SOPs. This position will be responsible for record review, raw material receipt and testing, product retains, product sampling and testing, lot release, and environmental monitoring. You will partner closely with pharmacy operations to ensure the pharmacy location maintains a high level of quality and compliance. This role will report to the Manager, Corporate Quality - Pharmacy on the Clinical team.What You'll Do Support QC oversight for compounding operations. Assist with development, support implementation, and maintain SOPs, Forms, Work Instructions and other required controlled documents. Own the finished product retain program, ensuring a sample of each compounded lot is retained per SOP. Conduct reviews of cleaning logs, compounding records, and other controlled records created throughout the facility. Assist in root cause investigations and continuous quality improvement initiatives. Assist in the execution of training on quality topics, functioning as the on-site SME for quality. Provide Pharmacy Compliance with requests arising from pharmacy inspections. Ensure the highest quality and cleanliness of the facility and equipment, leading our environmental monitoring program. Conduct Quality Assurance checks on relevant product batches according to predefined guidelines, reviewing final test results to perform lot release. What You'll Bring to the Team Bachelor's degree in any science discipline, preferred. Current pharmacy technician license in Florida or the ability to obtain pharmacy technician licensure, preferred. At least 3 years experience working in a manufacturing production environment or a high volume compounding pharmacy required. Experience working in a cGMP or 503B facility where PPE, cleanliness, and sterile sampling techniques are part of daily routine, required. Experience identifying need for and assisting in the creation of SOPs and other controlled documents. Knowledge of environmental monitoring in cGMP environments. Experience with Good Documentation Practices, preferred. Experience training others, preferred. Strong attention to detail and ability to think strategically and tactically. Outstanding written and verbal communication skills. Irrational passion for building the future of healthcare with an emphasis on quality processes to drive successful patient outcomes. We've Got You Covered Full medical, dental, and vision insurance + OneMedical membership Healthcare and Dependent Care FSA 401(k) with company match Flexible PTO Wellbeing + Learning & Growth reimbursements Paid parental leave + Fertility benefits Pet insurance Student loan refinancing Virtual resources for mindfulness, counseling, and fitness We welcome qualified candidates of all races, creeds, genders, and sexuality to apply. The target hourly rate for this position ranges from $30.43 to $36.78, in addition to a competitive equity and benefits package (as applicable). When determining compensation, we analyze and carefully consider several factors, including location, job-related knowledge, skills and experience. These considerations may cause your compensation to vary. Ro recognizes the power of in-person collaboration, while supporting the flexibility to work anywhere in the United States. For our Ro'ers in the tri-state (NY) area, you will join us at HQ on Tuesdays and Thursdays. For those outside of the tri-state area, you will be able to join in-person collaborations throughout the year (i.e., during team on-sites). At Ro, we believe that our diverse perspectives are our biggest strengths - and that embracing them will create real change in healthcare. As an equal opportunity employer, we provide equal opportunity in all aspects of employment, including recruiting, hiring, compensation, training and promotion, termination, and any other terms and conditions of employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, gender expression, familial status, age, disability and/or any other legally protected classification protected by federal, state, or local law. See our California Privacy Policy here.

Job Description Quality Lead Job Posted by ApplicantPro

Support production and parts sales by physically inspecting components against engineering drawings and like specifications to ensure workmanship meets acceptable standards of quality and/or customer requirements. This review may also include reviewing the associated certification path, performing FAI, issuing applicable FAA forms, and completing functional tests- to include ensuring the documentation is properly completed and filed. The candidate would work as a part of a Quality Control/Assurance team assuring aircraft components are in compliance with FAA/TSO requirements. - Excellent communication, both written and verbal - Ability to read and interpret blueprints & schematics - Must be able to use various measuring devices (i.e., micrometers, calipers, gauges, multi-meter, etc.) - Ability to set priorities, meet deadlines, and multitask - Work independently or in a team and possess a high level of self-motivation and initiative **Skills** Quality control, Quality check, Visual, Inspection, Quality assurance, Calipers, Micrometer, Blueprint, Visual inspection **Top Skills Details** Quality control, Quality check, Visual Inspection **Additional Skills & Qualifications** - Perform and document inspections on products and processes including inspection of aircraft air lies, aircraft seats, divans and other seating systems, monuments, spares, and other like components as they are being assembled. - Conduct first article inspections to ensure compliance with FAA and/AS9102 approved procedures and ensure all associated records are completed. - Must possess working knowledge and application of Quality Assurance or Quality Control systems and methodologies (AS9100). - MRB Authority. - Issuance of FAA 8130-3, 8130-9, and 8100-1 Forms in accordance with FAA requirements for authorized functions and activities to include conformity, prototype, export, and 14 CFR Part 43 Return to Service activities. - Able to complete FAA initial/recurrent designee training if required with a passing certificate as part of ARD approval process. - Assist with nonconformance investigations **Experience Level** Intermediate Level **Job Type & Location** This is a Contract to Hire position based out of Palm City, FL. **Pay and Benefits** The pay range for this position is $28.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Palm City,FL. **Application Deadline** This position is anticipated to close on Jan 23, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Forgen is dedicated to building a better future - for generations. Seasonal Position. The Quality Control Technician conducts daily inspections to ensure compliance with company and customer quality standards. They possess the authority to enforce corrective actions for any deficiencies in work, equipment, or materials. Their duties encompass maintaining quality assurance protocols, conducting material testing, and analyzing test results. They execute quality assessments, perform inspections, calibrate equipment, and communicate findings. Furthermore, they manage project document control, prepare submissions meeting project specifications, and interpret plans to ensure project compliance. Forgen Overview Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work. Key Responsibilities This role will include temporary night shift periods. Inspecting the work in progress to assure compliance with the quality control plan and quality criteria as specified in the Contract Documents. Performing quality control sampling and testing during construction or ensuring that outside companies are performing tests according to the specifications. Verifying that the equipment used in testing meets test requirements, that tests are conducted according to procedures and best management practices, and that testing equipment and procedures remain consistent over the duration of the project. Identifying work that does not meet acceptance criteria, documenting defective work, and reporting to the QC Manager. Administering the Inspection Test Plans (ITP). Completing the daily field logs. Taking daily field photographs. Maintaining quality control document files. Inspect all delivered materials to document there are no defects in workmanship, they have the proper identification, are not damaged and delivery is complete. Visual inspection will also include the correct quantity, completeness evidence of compliance with approvals, and proper documentation in accordance with manufacturer's requirements and the contract documents. Monitor delivery, handling, and storage of materials per specifications. Observe that storage facilities are applicable, protective, and secure to prevent damage or contamination to equipment and materials per specifications. Review and maintain any manufacturer material certifications. Pertinent information will be entered, and any non-conformances identified during material inspections will be recorded on a Material Delivery Receipt. Basic Qualifications Degree in an engineering discipline (civil, mechanical, electrical, structural), preferred. Knowledge of mathematics - arithmetic, geometry, calculus, and statistics and their relevant applications. Computer skills especially in the use of Microsoft Word and PowerPoint and the ability to manage files and records effectively. Valid Driver's License and ability to drive on behalf of company business. Preferred Qualifications The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary. 40-Hour HAZWOPER Training 8-Hour OSHA Refresher. Competent Person Safety Training. 30-Hour OSHA Construction Safety Training. EM 385-1-1 Training Physical Demands & Work Environment This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are essential. This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk. Equal Opportunity Forgen is an equal-opportunity employer and prohibits discrimination based on any legally protected status. Privacy Policy At Forgen, we are committed to protecting your privacy. We collect and use your personal data to manage the recruitment process, including assessing your application, verifying information, and, if applicable, entering into an employment contract. Your information may be shared with authorized third parties who perform services on our behalf, such as background checks, and only where permitted by law. We implement appropriate security measures to safeguard your information and retain it only as long as necessary for recruitment and legal purposes. You have the right to access, correct, or request deletion of your data, and to withdraw your consent at any time where applicable. For questions or to exercise your rights, please contact *************. California Privacy Policy Agency Policy

We are seeking to recruit a Surface Quality Inspector for our location in Jupiter, Florida Strong attention to detail by visually looking at the surface quality of polished optics by using both hands to hold the optic to look thru (transmission) and in reflection to perform the visual inspection of Ø 5mm to Ø 200mm parts. Perform a visual inspection of the optical (glass) lenses against applicable standards ( i.e. ISO10110 and MIL-PRF-13830) using a high intensity light source, or indirect lighting with eye loupes, and/or microscope to identify and find any surface defects (scratches, stains, chips, fractures, etc.) on the lens after polishing or coating. Use the applicable standard to determine if the depth/width of the defect is acceptable or rejected based on the drawing specification. Visual inspection of low/moderate (standard/commercial) grade surface quality requirements (80-50, 60-40 scratch dig equivalent) which are a commonly acceptable cosmetic standards. Perform the inspection of raw glass blanks with documentation and release of material to production. Must be able to use cleaning solvents (alcohol, acetone and others) with special cloth wipes to clean, wipe, and to dissolve and remove any contaminants from the lens before and after inspection. After inspection of the optics, must be able to wrap the lens to protect from scratches, stains, chips, etc. Must be able to follow written and verbal instructions in a reliable and consistent manner. Must accurately document the description of lenses that do not meet the surface quality requirements, segregate the nonconforming parts from acceptable lenses, and to protect the rejected lens before sending to rework (internally or externally) or transferring acceptable lenses to inventory. May use various measuring instruments to measure physical dimension (in mm and inches). Must be able to escalate observed or potential lens quality or process defects to team lead or department supervisor. Must be organized, meticulous and a conscientious worker to minimize mishandling. Lenses inspected are finished product to be built into assemblies that must be handled with utmost care. Maintain contamination control and cleanliness of the area at all times. Proper safety procedures and process controls will be followed at all times when working with solvents, sharp edges and high intensity light sources. Should be an independent worker who can be focused on their responsibilities under minimal supervision with handling and processing parts quickly and efficiently before sending the lenses to coating (outside process), inventory, or to the customer. Work instructions and inspection training to be provided but individual must be able listen and ask questions, refer to the instructions and notes taken, and retain the information provided to reference back. REQUIREMENTS: High School Diploma, some college preferred. General knowledge of reading mechanical or optical blueprints/drawings. Use of measuring equipment such a caliper or dial indicators (mm and inch units). General computer skills and aptitude. Experienced in an ISO 9000 quality system work environment is preferred.

Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Job DescriptionDescription: Whether you are just starting in your career or are an experienced Call Center Representative, Schumacher Auto Group is the place for you! We have a hands-on management team to help you grow & succeed all while earning the pay you deserve. Keep reading to see how you can join our team at Schumacher Auto Group today! The Customer Quality Department Operator is responsible for handling incoming calls from potential and existing customers, providing information about vehicles, scheduling service appointments, answering questions about financing, and generally promoting the dealership's products and services through phone interactions, aiming to drive sales and customer satisfaction. Essential Job Responsibilities Handles incoming calls for all departments of all Schumacher dealerships. Answers all calls professionally. Transfers to correct departments. Takes messages as necessary and promptly emails internal employees as needed. Answers clients questions such as directions, days/hours of dealerships and other. Attends brand webinars and trainings, staying abreast of current state of automotive industry standards and strategies. Sits and actively answers calls for long periods of time. Other duties as assigned by supervisor. Job Requirements High School diploma or equivalent. Experience providing quality customer service. Ability to read and comprehend written instructions and information in English. Able to work independently and manage time efficiently. Excellent communicator to support relationships with all employees, clients, visitors. Schumacher Auto provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. About Schumacher Automotive Group Schumacher Auto Group is an industry-leading Car Dealership Company with award-winning car brands in the West Palm Beach area, and exceptional team members. We have a strong focus on putting our customers and community first in everything we do. Requirements:

The QA Technician must be skilled at identifying possible problems throughout the production process and to use their intuition to problem-solve. They must also take meticulous notes, be organized about recording process steps, and work well with others. Mechanical aptitude a plus. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. * Performs routing inspection checks using established processes and procedures. * Participates in the material review board, investigates non-conforming issues/product to determine root cause and follows established procedures for disposition. * Supports the internal processes, provide instruction and guidance wherever needed. * Works closely with the Quality group in measuring and testing product and tabulating data concerning materials, product, or process quality and reliability. * Performs RMA duties as required, returns non-conforming product back to the supplier. Other duties may be assigned. REQUIRED COMPETENCY To perform the job successfully, an individual should demonstrate the following competencies : Quality - Demonstrates accuracy and thoroughness; mechanical ability, detail-oriented and should work well with established processes. Looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly. Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES, REGISTRATIONS PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Cath Lab Tech Location: Stuart, FL Agency: Prime Time Healthcare Pay: $2,164 to $2,419 per week Shift Information: Days Contract Duration: 13 Weeks Start Date: ASAP AlliedTravelCareers is working with Prime Time Healthcare to find a qualified Cath Lab Tech in Stuart, Florida, 34994! Job Description Now Hiring: Allied Healthcare Cath Lab - Stuart, FL Job ID: JOB-344763 Weekly Pay Range: Contact us for Pay Information Weekly Pay Range: $ 2164.10-$ 2418.70 wk Weekly pay ranges of $2164.10 - 2418.70 includes weekly taxable income and non-taxable reimbursements. *Actual amount dependent upon market adjustments Shift: Days Duration: 13 wks Are you a passionate Allied Healthcare professional looking for a new adventure? Prime Time Healthcare is seeking dynamic individuals like you to join our team in Stuart, FL and make a real impact in patient care! In this role, you'll be at the forefront of healthcare, delivering top-notch care with precision and compassion. As an integral part of our team, you'll collaborate closely with fellow healthcare professionals, ensuring every patient receives the highest level of care possible. If you're ready to elevate your career and make a difference in the lives of others, apply today! At Prime Time Healthcare, we offer competitive compensation along with a LARGE range of benefits including: Competitive compensation and WEEKLY direct deposit Compliance Support Specialist & Onboarding Assistance Dedicated recruiter for personalized support Paid, safe, pet-friendly lodging (if applicable) Round-the-clock customer support 24/7 Unlimited referral bonus up to $750 Medical, Vision & Dental insurance 401(k) Matching Program Flexible Schedules Travel Discounts Prime Time Healthcare, LLC is an Equal Opportunity Employer (EOE). *Estimated pay and benefits packages are on a per facility basis and may change with market conditions. Exact pay and benefits package will be negotiated with Prime Time Healthcare and may vary with several factors including but not limited to, guaranteed hours, travel distance, demand, eligibility, etc. About Prime Time Healthcare Prime Time Healthcare specializes in placing all Allied Professionals in temporary contracts throughout the U.S. Prime Time Healthcare has been voted "Best Places to Work" for 3 years in a row, made the list of Inc 5000's fastest-growing companies, and was a winner with Corporate LiveWire Healthcare and Life Sciences. We are also very humbled to have been voted "Best Travel Agency" by Blue Pipes! Prime Time Healthcare was created to offer healthcare employees an agency that puts their needs and goals first! With over 18 years of recruiting expertise, we pride ourselves on customer service and employee retention. You are not just a number when working with us, you are part of the Prime Time Healthcare Team. At Prime Time Healthcare, you work with the same recruiter throughout your time with us, there is no bouncing around. This allows you the opportunity to build a strong relationship with your recruiter. One of trust and support. We help with everything from getting licensed, explaining the compact licensure process, helping learn about stipends, and much much more! Our whole goal is to make sure that your travel experience is exceptional! We make sure that you travel happy! No matter what motivates you whether it's paying off student loans, wanting to build your resume, or just looking for adventure...Prime Time Healthcare is here for you! We work with new grads and make sure that they are offered mentorship. As a travel therapist, there is always the need to stay updated on the latest and greatest. We offer CEU reimbursement , to continue your education and professional development. Our housing professionals are friendly and committed to finding safe, clean, and affordable housing. Prime Time Healthcare prides itself on making sure your travel experience is the best it can be! 11107284EXPPLAT

Job Title Quality Engineering Technician Who are we? As an aircraft manufacturer, industrialist, industrial service provider and logistician, Daher currently has approximately 14,000 employees and achieved a revenue of 1.8 billion euros in 2024. With its family ownership, Daher has been focused on innovation since its creation in 1863. With locations in 15 countries across Europe, North America and Asia, Daher designs and develops value-added solutions for its aeronautical and industrial customers and partners Why Join Us? • Dynamic Environment: Be part of a supportive culture focused on employee development. • Career Growth: Contribute to the design and manufacturing of exceptional products. • Team Spirit: Join a team that values collaboration and motivation. This role is ideal for early-career professionals who want to build technical expertise while remaining closely engaged with shop-floor operations. ________________________________________ Quality Engineering Technician The Quality Engineering Technician bridges floor-level quality execution with engineering-level responsibilities. The Quality Engineering Technician ensures process integrity by providing immediate feedback on nonconformances, while also taking ownership of MRB defect planning, documentation, and structured RCCA investigations. The role is central to driving continuous improvement, supporting compliance, and strengthening collaboration between production and engineering teams. This position will be assigned to our 2nd shift but expected to work all shifts for the first 90 days. Responsibilities: Quality Engineering & MRB Defect Planning • Perform on-the-floor investigations of nonconforming parts and processes to support production and engineering. • Create and document dispositions for nonconforming tags (WTs) under engineer guidance. • Support MRB defect planning by: o Writing clear, structured defect documentation for MRB review. o Coordinating with engineering and operations to ensure timely disposition of defects. o Tracking MRB actions in SAP/MES and ensuring closure of defect records. o Preparing defect summaries and trend reports to support CAB and MRB meetings. • Collect and document objective evidence for root-cause and corrective-action investigations (RCCA). • Provide real-time feedback to production teams regarding quality issues, containment actions, and verification of rework. Systems & Documentation Management • Use SAP/MES systems to track work order status, update documentation, and tag nonconformances. • Support daily ZROUTSTAT reviews to validate work order status. • Review and contribute to work instructions to ensure accuracy, completeness, and compliance. • Assist with preparation and organization of internal audit materials and provide records as needed. Audit & Compliance Support • Participate in internal audits, FAA compliance reviews, and customer process assessments. • Support FAA and customer audit preparation activities. • Attend internal, FAA, and customer-facing meetings as a team representative or recorder. Production Floor Engagement • Perform daily walk-downs with operations and inspection personnel to verify process adherence and documentation accuracy. • Support First Article Inspection (FAI) data collection and verification activities. • Partner with Quality Engineers and Inspectors to resolve day-to-day quality concerns. • Contribute to continuous improvement efforts focused on defect reduction and process control. • Participate actively in Corrective Action Board (CAB) meetings as a key contributor for floor-level investigations, containment verification, and action items. ________________________________________ Required Qualifications • Associate or Bachelor's degree in Engineering Technology, Manufacturing, or Engineering preferred, equivalent technical or military experience will be considered. • 1-3 years of experience in quality inspection, manufacturing, or engineering support. • Ability to work second shift and be available to work other shifts as required. This position will be assigned to our 2nd shift but expected to work all shifts for the first 90 days. • Basic understanding of aerospace drawings, specifications, and manufacturing documentation. • Strong analytical, communication, and collaboration skills. • Ability to work effectively in a fast-paced production environment. • Must be prepared to complete Daher SeeD Training. What We Offer: Daher provides a comprehensive benefits package, including: • Medical, Dental, Vision Insurance • 401(k) with company match • Life Insurance, Short- and Long-Term Disability • Paid Time Off and Holidays Anticipated hourly rate $29 All applicants are considered for all positions without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical/mental disability, medical condition, military/veteran status, genetic information, marital status, ethnicity, alienage, or any other protected classification, in accordance with applicable federal, state, and local laws. By completing an application with Daher, you are seeking to join a team of hardworking professionals dedicated to consistently delivering outstanding service to our customers and contributing to the financial success of the organization, its clients, and its employees. Equal access to programs, services, and employment is available to all qualified persons. Those applicants requiring accommodation to complete the application and/or interview process should contact an HR representative. Daher complies with the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local law.

The CMM Quality Inspector is responsible for setting up, inspecting and signing off on aerospace components utilizing CMM (Coordinate Measuring Machines) and bench plate equipment. Parts will be inspected to engineering drawings, customer purchase orders, industry standards and specifications. Role requires the ability to obtain a Secret clearance. This is a first shift / hourly / non-exempt position reporting to the Quality Manager. Primary Duties & Responsibilities: Operate CMM machine using established programs, as well as creating new programs using Calypso software. Perform dimensional inspection on product using CMM, calipers, micrometers and height gauges. Perform visual and dimensional inspection on product per procedures. Perform first piece inspection and in-process inspections. Maintain lot integrity. Ensure all First Article Inspection (FAI) packages are properly completed. Must comply with all applicable safety requirements, policies and procedures, while maintaining a clean, safe, and orderly work environment. Must participate in required training, medical monitoring, safety, and health evaluations and programs. Other duties as assigned. Knowledge and Skills: Strong background concerning the usage and care of precision measuring tools and equipment. Ability to effectively read and understand blueprints, engineering documents, purchase orders, inspection manuals and procedures. Strong metrology, blueprint reading, and GD&T interpretation skills. Must be familiar with AS9102 Form and First Article Inspection (FAI). Must have practical experience performing in-process and final inspections. Demonstrates an understanding of related aerospace ISO and AS requirements. Must have experience using various mechanical inspection tools, such as micrometers and calipers. Maintain accuracy and attention to detail at all times and complete tasks in a timely manner. Knowledge of dimensional, visual and mechanical inspection processes. Ability to work with mathematical concepts. Proficiency using Microsoft Word and Excel. Able to apply common sense understanding to carry out work instructions furnished in written, oral or diagram form. Deal with issues involving several concrete variables in standardized situations. Ability to work with little supervision and make intuitive decisions when general instruction is given. Ability to work effectively with others in a team environment. Verbal and written communication skills (in English) Required to twist, turn, kneel, stoop, bend, and use hands to handle or feel. Close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Capable of lifting/moving 35 pounds Experience and Education: U.S. Person status required GED or High School diploma required Machinist certificate is a plus Minimum of 3 years of CMM inspection experience in an aerospace manufacturing environment Location Profile: Located in Port Saint Lucie, Florida, Atlantic Precision Inc (API) is a premier Aerospace Machining & Build facility with a talented work force using the latest 3D printing metal and additive manufacturing technologies in its 50,000 square-foot facility. With decades of experience, API is trusted by OEMs in commercial aviation, military aviation, power generation and the marine industry to produce quality parts for both prototypes and production requirements.

Job Description We're hiring a Quality Control Supervisor to oversee service quality across janitorial operations and ensure cleaning standards are consistently met. This role focuses on inspections, team oversight, and continuous improvement to maintain high client satisfaction. What You'll Do Conduct routine quality inspections across assigned janitorial accounts Ensure cleaning services meet company standards and client expectations Identify deficiencies and coordinate corrective actions with field teams Train and support janitorial staff on quality and safety procedures Communicate inspection results, issues, and improvements with management Requirements Experience in janitorial services, facilities management, or quality control Strong attention to detail and inspection skills Ability to manage multiple sites and priorities Clear communication and leadership abilities Valid driver's license and reliable transportation Benefits Paid time off (PTO) and company holidays Opportunities for growth and advancement Stable client portfolio and consistent workload Supportive, team-oriented work environment

JUST APPROVED: Travel Cath Lab/Neuro Stroke Tech - Port St. Lucie, FL: $2,962 Gross Weekly (40 HRS.) Taxable 0-40: $40.00/Hr. = $1,600 weekly Non-Taxable: $1,162 weekly Car Allowance: $50/ per full shift worked (tax free) Weekly Gross Pay: $2,962 for 40 hours Position: Cath Lab Tech/Technologist Location: Port St. Lucie, FL Shift: 10 or 12-Hour Days Duration: 13 Weeks Start: 02/12 Up to $250 per way travel reimbursement Great positions are available for qualified healthcare professionals across the country. Submit your resumes for consideration right away. Jessica Burg - Noor Staffing Group - jburg@noorstaffing.com or (646) 380-4495

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: Pursuit Aerospace is a world-class manufacturer of complex components for the aerospace industry, specializing in high-precision CNC machining and advanced material processing. We are seeking a Metallurgical Laboratory Technician to support our quality and engineering teams in ensuring the performance, safety, and compliance of critical aerospace components. This is a hands-on, technically engaging role involving metallurgical testing, process evaluation, and lab operations. The successful candidate will contribute directly to production quality and continuous improvement and may also provide occasional backup support and guidance to lab support personnel, helping to maintain high standards of accuracy and consistency. Location: Stuart, FL - On Site Responsibilities: Conduct microstructural analysis on gas turbine engine components including machined, brazed, welded, heat-treated, and thermally sprayed parts. Analyze materials such as stainless steel, titanium, and nickel-based superalloys. Prepare metallurgical samples (sectioning, mounting, polishing, etching) for microscopic examination. Perform hardness testing, EDM qualification analysis, and furnace uniformity surveys. Perform analyses of chemical processing and cleaning solution for composition and contamination. Evaluate supplier material/process certifications and compare against engineering specifications and blueprints. Maintain accurate documentation of lab test results and generate technical reports. Provide backup support to lab support personnel when needed. Collaborate with Engineering, Quality, and Operations teams to troubleshoot materials and process issues. Contribute to root cause analysis and continuous improvement initiatives. Maintain clean, calibrated, and properly functioning lab equipment and instrumentation. Manage inventory of lab supplies and consumables. Adhere to AS9100, ISO9001, and ISO14001 quality management and environmental systems. Follow all health and safety procedures in compliance with the Occupational Health and Safety Act. Report hazards, equipment deficiencies, or unsafe practices to leadership. Contribute to internal and external audits through accurate and timely documentation. Required Qualifications: Minimum 2 years of experience in a metallurgical or materials testing laboratory. Must be authorized to work in the U.S. on a full-time bases without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: College diploma or university degree in Metallurgy, Materials Science, or a related discipline - or equivalent hands-on industry experience. Experience working in an aerospace, or similarly regulated manufacturing environment. Strong knowledge of metallurgical sample preparation and microstructure analysis techniques. Proficiency in reading and interpreting engineering drawings and specifications. Competent in using microscopes, hardness testers, and other laboratory instruments. Strong written and verbal communication skills. Ability to work independently and as part of a technical team. Comfortable with computer-based documentation and lab report writing. Familiarity with Statistical Process Control (SPC) tools and data analysis. Knowledge of NADCAP requirements for special processes. Experience supporting quality audits and nonconformance investigations. Exposure to Lean or Six Sigma methodologies is an asset. Experience working in a fast-paced environment requiring you to pivot and adjust quickly to changing priorities and conditions. Strong communication skills with the ability to effectively coordinate with team members, and supervisors. Physical Requirements: Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to lift and carry 50 pounds. Manual dexterity for fine sample preparation tasks. Ability to sit or stand for extended periods during lab work. Comfortable using microscopes and lab tools for detailed, repetitive analysis. Use of required personal protective equipment (PPE) in accordance with company safety policy. Must be able to have prolonged periods sitting at a desk and working on a computer. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

We are seeking a skilled Cath Lab Technician to join a dynamic cardiovascular team in a leading healthcare facility near Stuart. This is an excellent opportunity for an experienced CVT/ARRT professional to work in a collaborative, patient-focused environment with state-of-the-art equipment. Shift Details Full-time, Day Shift: 6a - 2:30p, 8-hour shifts 10 call shifts per month; must live within 30 minutes of the facility Rotating on-call responsibilities Compensation and Benefits Up to $15,000 sign-on bonus Comprehensive benefits including medical, dental, vision, 401(k) with 100% match, tuition reimbursement, student loan repayment options, adoption assistance, employee stock purchase program, and more Why Join Us Work in a fully accredited acute care facility with advanced cardiovascular, orthopedic, and robotic surgery services Access to professional development and continuing education Supportive team environment focused on patient safety and high-quality care Relocation assistance considered on a case-by-case basis Your Role Assist cardiologists and radiologists during cardiac catheterization procedures Perform monitoring, scrubbing, and circulating duties Maintain and operate lab equipment safely following ALARA standards Keep inventory and supplies at appropriate levels Stay up-to-date with new procedures, equipment, and exam protocols Provide a safe and efficient environment for patients throughout procedures About the Location Stuart is a charming coastal community known for its beautiful beaches, outdoor recreation, and family-friendly atmosphere. Residents enjoy a relaxed lifestyle with easy access to nearby metropolitan amenities while staying close to the Treasure Coast.

Job Description Cooperidge Consulting Firm is seeking a Cath Lab Technologist (RT/CVT) for a top Healthcare client. This specialist role assists the cardiologist and/or radiologist in the Cardiac Catheterization Lab during invasive diagnostic and interventional procedures. The Technologist actively participates in monitoring, scrubbing, and circulating duties, ensuring a safe environment for the patient, and operating equipment while strictly adhering to ALARA (As Low As Reasonably Achievable) radiation safety standards. Job Responsibilities Assist the cardiologist or radiologist directly in the Cath Lab during the performance of all invasive cardiac and peripheral vascular procedures. Participate actively in all three primary procedural roles: monitoring, scrubbing, and circulating duties. Operate radiographic and cardiovascular equipment safely and effectively, maintaining strict adherence to ALARA standards throughout all procedures. Maintain current knowledge of new procedures, equipment, and exam protocols to ensure the highest level of care and technical proficiency. Assist with maintaining supply inventory at acceptable levels to ensure the lab is fully stocked and operational for scheduled and emergency procedures. Ensure a safe and sterile environment for the patient throughout the entire procedure within the scope of the technologist's practice. Requirements Education Completion of an accredited school of Cardiovascular Technology is required. Experience Prior experience in a Cardiac Catheterization Lab or Interventional Radiology setting is highly preferred (implied by the job title). Certifications/Licenses Required Certifications (one of the following): Cardiovascular Technologist (CVT) / Registered Cardiovascular Invasive Specialist (RCIS) Registered Radiologic Technologist (ARRT) Current Basic Life Support (BLS) certification as a Healthcare Provider (American Heart Association) is required. Current Advanced Cardiac Life Support (ACLS) certification as a Healthcare Provider (American Heart Association) is required. Skills Proven ability to participate effectively in all three Cath Lab roles: monitoring, scrubbing, and circulating. Strong technical skill in operating equipment and adhering to radiation safety (ALARA) standards. Comprehensive knowledge of cardiac procedures and anatomy to assist the physician effectively. Benefits Competitive pay with opportunities for overtime and weekend shifts. Comprehensive medical, dental, and vision insurance. Life insurance and disability coverage. 401(k) retirement plan with employer match. Paid time off - vacation, sick leave, and holidays. Continuing education and professional development opportunities. Supportive, team-oriented work environment.

Mission Responsible for inspecting incoming, in-process and final production parts to drawing specifications. They will be responsible for inspecting finished firearms from outside vendors and in-house to company standards. They will also be responsible for cross training to help where the Quality needs are for, that time. Responsibilities Inspect and document findings for incoming, In-process and final inspection parts. Inspect firearms manufactured, assembled, or repaired in the manufacturing area or by outside vendors. Identifies and documents any mistakes or problems associated with the items being inspected. Maintains accurate records of all items inspected. Submits reports to the Quality Manager regarding quality and items inspected. Utilizes basic test equipment such as calipers, Micrometers, Height Gages, CMM, Keyence, Rockwell Testers, Progressively improves upon and maintains acceptable inspection numbers in accordance with Company standards. Always stays on task with assigned duties. Adheres to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment directed by the Company at all times. Maintains and keeps workstation and department area clean. Complete all required paperwork timely and accurately. Adhere to all employment policies/safety policies/practices required by law/established by Company. Immediately report any maintenance and/or safety issues to supervisor Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Other duties will be assigned, as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Proficient with standard measurement tools, height stands, calipers, micrometers, and optical comparators. Keyence, CMM calypso/zeiss (preferred) Understanding and knowledge of Geometric Dimensioning and Tolerances Experience in reading Engineer drawings. Interact effectively with a variety of people. General mechanical ability is required. Possess sound problem-solving skills to help facilitate solutions to problems identified during the inspection process. Proficient in using Excel, Word and Outlook Strong understanding of Trigonometry and Mathematics Able to do a full layout of dimensional features. Experience with ERP system use, preferred. Ability to follow directions and prioritize accordingly.

Mission Responsible for inspecting incoming, in-process and final production parts to drawing specifications. They will be responsible for inspecting finished firearms from outside vendors and in-house to company standards. They will also be responsible for cross training to help where the Quality needs are for, that time. Responsibilities Inspect and document findings for incoming, In-process and final inspection parts. Inspect firearms manufactured, assembled, or repaired in the manufacturing area or by outside vendors. Identifies and documents any mistakes or problems associated with the items being inspected. Maintains accurate records of all items inspected. Submits reports to the Quality Manager regarding quality and items inspected. Utilizes basic test equipment such as calipers, Micrometers, Height Gages, CMM, Keyence, Rockwell Testers, Progressively improves upon and maintains acceptable inspection numbers in accordance with Company standards. Always stays on task with assigned duties. Adheres to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment directed by the Company at all times. Maintains and keeps workstation and department area clean. Complete all required paperwork timely and accurately. Adhere to all employment policies/safety policies/practices required by law/established by Company. Immediately report any maintenance and/or safety issues to supervisor Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Other duties will be assigned, as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Proficient with standard measurement tools, height stands, calipers, micrometers, and optical comparators. Keyence, CMM calypso/zeiss (preferred) Understanding and knowledge of Geometric Dimensioning and Tolerances Experience in reading Engineer drawings. Interact effectively with a variety of people. General mechanical ability is required. Possess sound problem-solving skills to help facilitate solutions to problems identified during the inspection process. Proficient in using Excel, Word and Outlook Strong understanding of Trigonometry and Mathematics Able to do a full layout of dimensional features. Experience with ERP system use, preferred. Ability to follow directions and prioritize accordingly.