Quality inspector jobs in Dothan, AL

Job Title: Quality Control Technician/Inspector - Concrete Industry Company: DZ Corporation Employment Type: Full-Time About Us: DZ Corporation is a trusted name in the concrete industry, committed to delivering high-quality products and services. We are currently seeking a dedicated and detail-oriented Quality Control Technician/Inspector to join our team in The Villages, FL. Responsibilities: Inspect and test concrete samples to ensure compliance with industry standards and project specifications. Conduct pre-pour and post-pour inspections of forms, molds, and reinforcement placement. Perform wet and hardened concrete testing (e.g., slump, air content, compressive strength). Monitor curing processes and verify proper procedures are followed. Maintain accurate documentation of inspections, tests, and corrective actions. Communicate with production teams and suppliers to resolve quality issues. Ensure compliance with safety and environmental regulations. Assist in developing and improving quality control procedures. Conduct audits of batch plants and material suppliers. Qualifications: High school diploma or equivalent; technical training or associate degree in construction or materials science is a plus. 2+ years of experience in concrete quality control or inspection. Familiarity with ACI, ASTM, and NPCA standards. ACI Certification (Field Testing Technician Grade I) preferred. Strong attention to detail and problem-solving skills. Ability to work independently and as part of a team. Basic computer skills for data entry and reporting. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holidays. Opportunities for professional development and certification. Supportive team environment.

TSC's Systems Production and Transition Division in Huntsville, AL is actively recruiting a motivated Quality Control Electronics Inspector with an education and/or industry focus in quality of electronic systems in support of military radar and communications hardware and systems. This role will support the TSC Production group by inspecting incoming printed wiring boards, printed wiring assemblies and cables purchased from suppliers. In addition, this role will perform in-process and final inspection of higher level assemblies. Mechanical Inspection skills a plus. Inspection will include documenting results and preparing nonconformance reports where applicable. This position prefers an individual who promotes continual improvement; and has the ability to perform at high-levels in a fast-paced, dynamic environment. As part of the Quality team, other quality duties may be assigned. Responsibilities: Conduct incoming inspection of printed wiring boards (PWBs), printed wiring assemblies (PWAs), and cable assemblies Conduct incoming inspection of parts bought from unauthorized distributors to ensure parts are not counterfeit Conduct in-process and final inspection of electronic and cable assemblies in production Conduct conformal coating inspection of printed wiring assemblies (PWAs) Log inspection results to track metrics Document and process nonconforming parts to ensure containment and proper disposition Support first piece and first article inspection per AS9102 and source inspections, as required Create material return notices to initiate return of damaged, defective, etc. parts to suppliers Conduct internal audits Required Knowledge: Current Certification in IPC-A-610 requirements, IPC-600, 620 and J-STD-001 Certification a plus. Experience with reading and understanding complex engineering drawings Experience with ISO 9001 or AS9100 Quality Management Systems, strongly preferred Knowledge of PLM, PDM, and configuration control process Knowledge of Costpoint or similar ERP system to enter quality inspection results Knowledge of solder joint characteristics, printed circuit board assembly processing tools and materials. Experience working in a quality team environment with suppliers, engineers and program managers Required Skills: Currently Certified to IPC-A-610, IPC-A-620, IPC-A-600 and J-STD-001 Certification also preferred. Proficient in use of Microsoft Office: Word, Excel and PowerPoint Organized and strong attention to detail Excellent verbal and written communication skills Accurately maintain company records and documents in accordance with policies and procedures Work independently in a fast-paced environment and get along with others Experience with basic mechanical and dimensional inspection a plus. Required Qualifications: Associate degree, in related field, with 5 years of electronics inspection experience, or 7 years of electronics inspection experience in manufacturing environment TSC Benefits: TSC offers a stable work environment, a competitive salary and a comprehensive benefits package; including ESOP contributions, 401k Matching Program, Flexible Work Schedules, Tuition Reimbursement, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Title: Spring Co-Op - Nondestructive Inspection (NDI) Pay Rate: $18.00/per hour. Overtime available for 40+ hour weeks Location: Multiple locations throughout the Southeast including Marietta, Charlotte, Augusta, Savannah, Mobile, Jacksonville, Shreveport and Dothan. Most of the work being performed at our clients' sites within the region with the potential for some national assignments. Travel: Hotel accommodations, per diem and milage reimbursement expenses will be available in addition to paid travel time to the clients' work sites. Schedule: The work schedule is officially part-time but will include several assignments that may be 70+ hours per 7-day work week dependent on the outage schedule and site assignments. About Us: Applied Technical Services, LLC is a leading provider of critical testing, inspection, certification, and compliance services. We serve clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today, ATS employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world, and our mission is to deliver assurance through precise technical and professional services. Overview: As a Co-Op on the Nondestructive Inspection team at ATS, you will have the opportunity to partner with our team to support multiple projects on our clients' sites within the region. The Co-Op is going to include direct hands-on general tasks related to these specialized inspection services. Key Responsibilities: * Work with leaders and other NDI Technicians on general tasks related to the team. * Opportunity to learn and apply the industry various inspection methods and gain hands on experience. * Perform tasks as directed to prepare components or equipment for inspections. * Work alongside certified technicians to help complete projects and learn activities. * Interface with personnel to determine scope of work and work priorities to meet customer expectations. * Help clean and organize equipment before, during, and at the completion of projects. * Document on job training experience as assigned by management. * Perform other job-related tasks as assigned by supervisors. Work Conditions: * Most work will be completed in an industrial environment including, but not limited to papermills, power generation, and manufacturing facilities. * Must be able to wear safety equipment as required by the safety department for personal protection. * Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc. * Work in confined spaces which will require crawling, stooping, climbing, etc. * Work in and around operating equipment and industrial environments. * Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc. * Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time * Ability to lift and carry 100 pounds. Benefits: * Gain hands-on experience in the NDI industry. * Mentorship and coaching with industry leaders in real world settings. * Networking opportunities within the company. * Ongoing training, both hands on and in classroom, and certifications available Tuition Reimbursement: Upon the completion of one (1) designated work term, and upon returning to ATS to work, the employee will be reimbursed for tuition and books only for the previous school term. * Tuition: The employee will be reimbursed for tuition and fees specifically associated with classes (i.e., lab fees) pertaining to his/her degree for the previous school term. * Books: The employee will be reimbursed for books applicable to his/her degree and required by his/her courses for the previous school term. * Payment Scale. Based on overall semester GPA, ATS will reimburse based on the following schedule: * ≥ 3.0 100% * 2.7 to 2.99 80% * 2.5 to 2.69 60% * < 2.5 0% Payment will be made after final grades and receipts are submitted to ATS. Out-of-state tuition or lab fees or university fees will not be included in reimbursement.

Job Description Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Must be able to climb and lift up to 50lbs. Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

We are seeking reliable and detail-oriented Quality Control Technicians to join some leading teams at multiple locations in Dothan, AL. The ideal candidate will be responsible for inspecting and testing parts, ensuring compliance with quality standards, and maintaining accurate records.Pay: $15-$20/hour Schedule: Monday-Friday, 1st shift with weekends as needed Quality Control Responsibilities: Inspect and test machine parts for quality and accuracy Document inspection results and non-conformance issues Collaborate with the production team to maintain quality standards Assist with equipment calibration and maintenance Quality Control Qualifications: High school diploma or GED Prior experience in quality control or manufacturing Strong attention to detail and ability to work independently Ability to lift up to 50 lbs and stand for long periods Welding/Fabrication experience is preferred Apply today and join a growing team dedicated to excellence!

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. **The pay rate for this role in Florida is $33.40 per hour.** **Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************** **Responsibilities :** + Perform NDT (Non Destructive Testing) inspection of welds, ride structure, and ride vehicles + Execute overhead rigging safety inspections + Complete various mechanical inspections + Perform rope access inspections + Cast members may be required to handle cleaning chemicals and supplies + Additional Personal Protective Equipment (face shields, goggles, refillable hand sanitizers, etc.) may be required **Basic Qualifications :** + Minimum of 3 years' experience performing weld inspections or equivalent visual inspections + Minimum of 2 years' experience documented as a Level II NDT Certified Inspector in magnetic particle and liquid penetrant inspection + Ability to read and work from blueprints, schematics, sketches, and verbal instruction + Familiar with non-destructive test techniques and basic mechanical measurement equipment + Ability to perform rope access work + Ability to lift up to 50 pounds + Excellent written and interpersonal communication skills + Proficiency in standard office software programs and mobile electronic devices **Preferred Qualifications:** + SPRAT Rope Access Certification + Familiarity with ultrasonic digital thickness measurement + Computer literate + Knowledge of AWS and ASME codes + Mechanical inspection experience or ASQ Mechanical Inspector Certification. + Certified Welding Inspector (CWI) **Additional Information :** **Schedule Availability:** Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year. Schedules and start times are subject to vary. **We proudly and enthusiastically encourage qualified individuals with experience in the U.S. Military to apply.** Keyword: WDW Casting WDW: Walt Disney World Casting Hourly Jobs **Job ID:** 1232675BR **Location:** Orlando,Florida **Job Posting Company:** "Walt Disney World Resort" The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

This position is a certified Level II Quality Control inspector in all disciplines/methods. The individual should have the necessary training and experience to obtain level II certifications within six months of employment. The position is in the Engineering Support Department and will report to the Plant Support Manager at Plant Hatch near Baxley, Georgia. Job Summary / Responsibilities + Maintain all areas of knowledge and experience associated with procedures, instructions, and work orders associated with inspections and examinations as required by the Level II. + Initiate/Implement schedules, perform inspection planning and perform completion reviews associated with inspections, examinations, and material receipt. + Perform inspections, examinations and material receipt of work activities associated with plant maintenance, modifications, or construction projects in accordance with approved procedures and instructions, codes and standards. + Perform testing or verification of materials associated with permanent plant equipment. + Assist in the development and implementation of various inspection and examination programs and procedures. + Responsible for assisting the certifying authority level III in the training and certification of lower-level personnel. + Evaluate indeterminate or unacceptable inspection or examination results for defect characterization and possible corrective measures. + Provide technical direction and oversight for other personnel during normal and outage work activities. + The candidate is expected to take a leadership role in training less experienced personnel and coordinating inspection contractor personnel during outages. Education/Certification Requirements + Must have held a Level II or III certification per NQA-1 and /or ASNT CP-189 within the last eight years. + Associate or higher degree in relevant field preferred. + Technical training in the area of inspection resulting in ANSI Level II or III certification in the following fields is preferred: Electrical, Mechanical, I&C, Civil, Coatings. + Technical training in the area of nondestructive testing resulting in Level II or Level III certification in the following fields is preferred: Visual Section XI, Visual Welding, Magnetic Particle, Liquid Penetrant inspection. Background/Experience Requirements + Past or current experience in performing inspections and be able to be certified to ANSI N45.2.6 as a Level II inspector. Must be able to pass practical and written test. + Be able to obtain and pass the practical and written test for ANSI mechanical, electrical, civil inspections. + Knowledge of 10CFR50 Appendix-B, NQA-1 Quality Programs, Code of construction for nuclear power plants, ANSI and ASME codes. + Must have at least 2 years of documented experience in welding, visual inspections, MT and PT to AMSE BPVC XI experience. + Familiar in the use of common computer software such as Word, Excel in generating documents. + Knowledge and application of the fundamental concepts, practices and procedures of particular field of specialization + Familiar with standard concepts, practices, and procedures within the quality field. + Intermediate computer skills including job specific programs, spreadsheets, word processing + Ability to read and understand procedures, specifications and drawings and to evaluate documentation for compliance with design specifications + Review QA procedures to verify compliance with ASME, IEEE, and NRC regulations + Mechanical aptitude and Electrical background required + Must be able to work in hot and cold environments. Must be able to climb ladders and scaffolding to perform duties of this job. + Industrial site experience is preferred. + Nuclear power plant experience is preferred. + Demonstrated leadership is desired. + Must be willing and able to perform on-call duties. Behavioral Attributes + Places highest priority on nuclear and industrial safety. + Works through conflicts to achieve best possible solution. + Works well in team setting. + Respects the dignity and different views of every individual. + Assumes personal responsibility for individual and team success. + Must be able to hold self and others accountable for safe work behaviors. + Optimizes the use of resources. + Leadership courage to identify and document items adverse to quality. Southern Nuclear , a subsidiary of Southern Company (NYSE: SO), is a leader among the nation's nuclear energy facility operators and an innovator in advanced nuclear technologies. Southern Nuclear is an essential part of Southern Company's energy portfolio, operating over 8,200 MW across eight nuclear energy units in Alabama and Georgia at the Joseph M. Farley Nuclear Plant near Dothan, Ala., the Edwin I. Hatch Nuclear Plant near Baxley, Ga., and the Alvin W. Vogtle Electric Generating Plant near Waynesboro, Ga. The company recently achieved commercial operation on Vogtle Units 3&4, representing an historic achievement for the nuclear industry and the country. Vogtle Units 3&4 are the first new nuclear units to reach commercial operation and be built in the United States in the last three decades. Southern Nuclear is a recognized leader in the industry in nuclear and fuel innovation, having been the first to deploy Accident Tolerant Fuels and winning over 10 consecutive Top Innovative Practice (TIP) Awards and eight EPRI awards. For more than 40 years, Southern Nuclear has operated nuclear energy facilities at the highest levels of safety and reliability, generating carbon-free electricity for millions of homes and businesses. The company's headquarters is in Birmingham, Ala. Twitter: @SouthernNuclear; Facebook: facebook.com/southernnuclear; *********************** Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 15704 Job Category: Power Plant Operations & Maintenance Job Schedule: Full time Company: Southern Nuclear

RK&K is hiring a Senior Roadway Inspector to join our CEI team in the Chipley, Florida area. This position is in our Construction Management group which oversees Contractors on roadway construction projects. Essential Functions Responsible for performing highly complex technical assignments in field surveying and construction layout, making, and checking engineering computations Assist the Project Administrator in daily roadway inspection Ensure contractor compliance alongside quality control Perform inspections and testing as required Testing and inspections include but are not limited to earthwork, asphalt, concrete, bridge structures, lighting, pavement markings, signing and signalization, and other roadway safety components. Provides general management, supervision and instruction for the CEI Inspectors Work is performed under the general supervision of the Project Administrator Required Skills and Experience High school graduate or equivalent plus four (4) years of experience in roadway or bridge construction inspection, two (2) years of which shall have been in roadway construction inspection CTQP Concrete Field Inspector Level I CTQP Concrete Field Inspector Level II (Bridges) CTQP Asphalt Roadway Level I and Level II CTQP Earthwork Construction Inspection Level I and Level II CTQP Pile Driving Inspection CTQP Drilled Shaft Inspection CTQP Final Estimates I Preferred Skills and Experience Previous FDOT roadway and/or bridge construction inspection experience Critical Structures Construction Issues certification FDOT Self Study Computer Based Training course completion Supervised two or more inspectors and directly responsible for all inspection requirements related to the construction operations assigned Other Duties This job description indicates the general nature and levels of work, knowledge, skills, abilities, and other essential functions (as covered under ADA). It is not designed to cover or contain a comprehensive listing of all activities and duties required by the employee. Other duties are assigned as required . What We Offer RK&K offers excellent potential for career advancement and professional growth. We also offer attractive compensation packages commensurate with experience and a comprehensive benefits package including: Paid time off Tuition reimbursement Health, dental, vision, life, and disability insurances Matching 401(k) plan Paid Holidays Much, much more! Why RK&K? As a full-service engineering and construction management firm, RK&K gives you the opportunity to directly impact the communities in which we live and work. What sets RK&K apart is an award-winning culture that has fostered a spirit of collaboration and trust for over 100 years. To its clients, the firm delivers concepts, processes, and outcomes that are designed for success. RK&K has earned its reputation as a trusted partner, responsive employer, and community steward. Design your career at RK&K, Apply Today!

Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

We have an immediate need for a Quality Control Inspectors position. We are an ISO-9001 Certified OEM manufacturer. The selected individual will be part of a growing, fast paced global manufacturer and report to the Quality Assurance Manager. The Quality Control Inspector will perform daily inspection of incoming materials, in-process materials and final assembly materials and complete all necessary reports needed. Job Skills The QC Inspector must be able to read basic electrical drawings/or assembly drawings. The QC Inspector must be able to use a variety of measurement equipment, tape measures, calipers, gauges, micrometers in metric and Std. units of measure. The QC Inspector must have previous ISO-9001 or comparable QMS experience. Must have better than average computer skills. Previous experience w/ wire, cable, wire harnesses, elec. assembly/testing will make you stand out. JOB DESCRIPTION: Perform incoming inspection on specific products identified by management as critical. Perform daily in-process inspection. Perform basic lab tests on random samples of incoming materials for lab testing as required by management. Perform daily finished goods inspection Perform equipment calibrations as required Complete all documentation as it relates to daily inspection process or lab test. Assist in the processing of Returned Goods for the field and issue appropriate reports. Other duties as deemed appropriate by management. REQUIRED EXPERIENCE: Read basic electrical and assembly drawings. Mid-Level computer knowledge: 1 year Job Type: Full-time Job Type: Full-time

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. 2:00pm-10:30pm

Atlas is a nationwide leader in civil engineering materials testing and geotechnical consulting services for environmental industrial and infrastructure construction projects Headquartered in Denver CO Atlas currently has over 3500 employees with offices throughout the US including Alaska & Hawaii Its no accident that Atlas creates a better experience for infrastructure and environmental projects Its how we are built with the best people in the industry with the reach and expertise to help at any and every step of the project and with a heart led approach that puts quality and safety at the center of everything we do Were just built to be better We are a great company We are seeking a CEI Level 3 Inspector to join our Birmingham AL team Come join us Job responsibilities include but are not limited to This is skilled sub professional engineering work in the field or office Employees in said class shall act as the Assistant Project Manager and be responsible for reviewing and directing inspection duties of all project inspectors The Senior Inspector shall be capable of surveying and drafting as they apply to documenting and inspection of a construction project The Senior Inspector shall report directly to Project ManagerMinimum requirements Eight years of experience in construction inspection surveying or highway materials testing and inspection or a Bachelor of Science degree in Civil Engineering or Registered Professional Engineer with two years of experience in construction inspection surveying or highway materials testing and inspection One or more of the following certifications as necessary and approved by the Region Engineer Inspectors who are to perform a specific task shall be certified in said field Asphalt Level I Laboratory Technician CertificationAsphalt Level II Quality Manager Technician CertificationCertified Concrete Technician ACI and ALDOT CertificationRoadway HMA Pavement Technician CertificationWork Zone Safety CertificationRadiation Safety Technician CertificationQualified Credentialed Inspector QCIContract Plan Reading CertificationBenefits Atlas offers a comprehensive benefit program to meet the diverse needs of our employees Depending on your employment status Atlas benefits include health dental vision life AD&D voluntary life AD&D disability benefits leaves of absence 401k paid time off paid holidays employee assistance program educational assistance program Who We Are We strive to be the most sought after infrastructure and environmental solutions company known for our unique values driven approach and brought to life by the industrys most exceptional people Atlas provides professional testing inspection engineering environmental and consulting services from more than 100 locations nationwide We deliver solutions to both public and private sector clients in the transportation commercial water government education and industrial markets With a legacy of providing consistent quality and results Atlas creates a better experience at every stage of an infrastructure project We connect the best experts in the industry to deliver value from concept to completion and beyond This means doing everything our clients expect and then raising the expectations in a way that only our people can Our Values Life We enhance quality of life We value people and safety above all else Heart As our hallmarks we act with compassion empathy and respect Trust We work together as partners doing what we say with full accountability Mastery Always striving for the highest quality we ensure greatness inspires all our work Atlas EEOC Statement Atlas is an equal opportunity employer We prohibit discrimination and harassment of any kind based on race color sex religion sexual orientation national origin disability genetic information pregnancy or any other protected characteristic as outlined by federal state or local laws This policy applies to all employment practices within our organization including hiring recruiting promotion termination layoff recall leave of absence compensation benefits training and apprenticeship Atlas makes hiring decisions based solely on qualifications merit and business needs at the time For more information read through our EEO Policy httpswwweeocgovsitesdefaultfiles2023 0622 088EEOCKnowYourRights612ScreenRdrpdf

Quality Control Inspector - New Residential Plumbing Quality Inspector Augusta, Georgia Salary Range: $35,000-$45,000 Depending on Experience We are a family-owned and operated company with a strong commitment to our employees and clients. We are seeking a dedicated Quality Control Inspector to join our team. As a plumbing Quality Control Inspector, you will be responsible for inspecting plumbing systems in new construction homes, ensuring that all work is performed to the highest standards. We offer competitive pay and benefits package, a supportive work environment, and opportunities for growth within our company. Does This Sound Like You? A keen eye for spotting even minor plumbing issues that could lead to bigger problem Understand plumbing systems, materials, and installation techniques, as well as local building codes Assess plumbing installations and determine whether they meet safety and quality standards Ability to explain findings clearly to builders and contractors Don't just identify issues, but also recommend solutions Uphold industry standards and ensure compliance with regulations Enjoy working in the field rather than being confined to an office The Experience We'd Love To See: A strong understanding of plumbing systems, materials, and installation techniques is essential Previous experience in home inspections or quality control, especially in construction or plumbing, is highly valued A thorough knowledge of local, state, and national plumbing codes is crucial for ensuring compliance The ability to identify even minor issues in plumbing installations is key to maintaining high-quality standards Inspectors often need to explain findings to builders, contractors, or homeowners, so clear and professional communication is important The ability to recommend solutions for non-compliance or defects is a valuable asset What You'll Get To Do: Examine installations, fixtures, and equipment to ensure they function properly and meet regulatory requirements Prepare detailed inspection reports and maintaining records Spotting violations or non-compliance and recommending corrective actions Advising contractors, plumbers, and property owners on plumbing regulations and safety standards Keep up with changes in plumbing codes, regulations, and industry trends Why You Want This Job: The demand for quality plumbing inspections remains strong, especially with ongoing residential construction projects If you enjoy practical problem-solving and working in the field rather than in an office, this role offers plenty of opportunities You play a crucial role in making sure plumbing systems meet safety standards and function properly With experience, you can advance into supervisory roles Plumbing inspectors often earn solid wages, especially with developing experience You help homeowners avoid costly plumbing issues by ensuring installations are done right the first time This Position Offers: A fast-growing industry with a rapidly expanding company Family friendly atmosphere Monday-Friday work week with weekly pay Health, prescription drug, vision, and dental insurance available Short- and long-term disability as well as life insurance available Matching 401(k) and potential yearly holiday bonus Great Work-Life balance and Employee Assistance Program offered Quality Control Inspectors are problem solvers who ensure that vital systems run smoothly, keeping water clean, waste safely managed, and living and workspace comfortable. Interested in learning more? Please apply now to join our fanatical plumbing family!

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

Title: Quality Control Inspector Duration: 6 months (Possible extension) 1 PM TO 9 PM PAY RATE: $22/hR. Qualifications: 1 PM TO 9 PM Plans and directs activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products. Tests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must have Basic Computer Proficiency to include fundamental tasks such as email, word processing software, creating and maintaining spreadsheets in MS Excel and navigating Operating systems. EDUCATION and/or EXPERIENCE: Associate degree in an aviation related field preferred At least 1-year relevant aviation work experience Minimum of 2 years'experience in basic dimensional/visual inspection required on aviation related equipment (airframe, powerplant, and or avionic) Certify visual acuity to NAS-410 Airframe and Powerplant FAA certifications preferred Responsibilities: ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Provide quality control final inspection support, and shipping / receiving inspection support. Accurately interpret engineering drawings, customer specifications, company specifications, sampling procedures, designs, forms, and instructions for recording, evaluating, and reporting quality and reliability data. Utilize precision tools and equipment with accuracy for testing and measurement of products. Recommend modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.

Sun Hospitality is a full-range housekeeping provider offering services to the vacation resort industry. We are committed to creating a positive experience for our clients and guests with welcoming, helpful, and outstanding service, while maintaining a clean and comfortable environment. We are a growing company with multiple locations nationwide and looking for passionate individuals who can grow their hospitality career with us. We are searching for a Lead Inspector to join our team at our location in Myrtle Beach, SC. Job Purpose/Functions: An inspector must ensure that room attendants meet all compliance and performance standards, and that all resort unit interiors meet cleanliness expectations. Duties may also include prepping and cleaning units, training staff, and quality control. Provide the very best service to ensure that owners and guests have a positive vacation experience. Prep and clean units, including but not limited to, bathrooms, kitchens, living rooms, closets, desks and floors. Assist in the training of all staff, existing as well as new hires. Report unit maintenance issues. Examine carpets, drapes and furniture for damage or wear. Retrieve housekeepers to address any areas that need to be re-cleaned. Replace missing inventory. Assist in solving guest complaints promptly. Assist in maintaining clean and organized storage closets. Assist in inventory of supplies. Utilize supplies and equipment efficiently. Report any lost or found items. Ensure that all staff appears professional and is in full uniform. Exemplify a sense of urgency with housekeeping staff to ensure all units get turned on time. Willingness to perform site operations duties as assigned by manager. Characteristics/Skills for Success: Good communication skills with the ability to effectively respond to guest requests and questions from managers, supervisors and co-workers. Self-Motivated and Team Player mentality. Detail Oriented. Organization skills. Perform routine work over and over again. Ability to lift up to 50 lbs. At SUN we understand that our people are our greatest asset. We are committed to investing in your career development and progress. SUN offers on the job training along with continued leadership education through our SUN Certified Inspector (SCI) Program. The Perks of Working for SUN: Incentive Programs Competitive Pay Flexible Hours Career Progression Opportunities Training and Development Opportunities Nationwide Employee Discounts (Movies, Concerts, Theme Parks and More!) Full Time Benefits offered to SUN employees: Full Medical MEC (Minimum Essential Coverage) Plans Dental/Vision/Life Insurance Paid Time Off Freshbenies (Savings plans/legal/pet care savings/teledoc) Tickets at Work (discounted savings on sporting events, concerts, movies, theme parks, many more) Job Type: Full-Time

Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? * Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. * Innovation: Be a part of a team that's shaping the future of construction and infrastructure. * Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. * Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: * Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment * Read and understand shop fabrication drawings and specs and verify dimensions of product or material * Perform internal audits and maintain quality control inspection records * Act as liaison to outside inspectors * Resolve quality issues due to production and fabrication errors * Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC experience preferred. * Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. * Ability to interpret readings from Micrometers, Calipers, and other QC tools. * Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

Job Description Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. Innovation: Be a part of a team that's shaping the future of construction and infrastructure. Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment Read and understand shop fabrication drawings and specs and verify dimensions of product or material Perform internal audits and maintain quality control inspection records Act as liaison to outside inspectors Resolve quality issues due to production and fabrication errors Inspect finished good loads prior to plant departure Coach and train the team in quality requirements Qualifications: High School Diploma or GED. 2 years manufacturing experience. Prior QC experience preferred. Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. Ability to interpret readings from Micrometers, Calipers, and other QC tools. Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? The process is simple. Click on the “apply” button to get started.