Quality inspector jobs in La Crosse, WI

We are looking for 3rd shift availability. Shift hours are Friday through Sunday 5am to 5pm. • Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. • Perform visual inspection of material as required. • Perform layout checks as needed. • Perform rotational capacity tests on bolts prior to use in shop. • Work with outside inspectors to resolve quality issues on the floor. • Monitor welder qualification tests. • Monitor and record welding parameters to insure compliance to approved WPS. • Be able to read and understand the Welding code and Specifications. • Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. • Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? • Perform in a manner that will assure quality work flowing through the shop. • Work with welders and leadmen to maintain quality. • Be available, by use of a radio, etc. to perform needed checks. • Maintain a log of work done, and complete required reports. • Interpret the Specifications and applicable Codes. • Ability to be flexible to work either early or late within assigned shift as needed. • Coordinate inspection of QC hold points between production and DOT Inspectors. • Use and encourage safe working habits. Must have CWI Certification NACE or BCI Certification is desired Ability to be conscious of Specifications and Company standards Ability to be organized and precise in maintaining a diary and reports Must have good people skills in dealing with difficult situations Ambitious person to help meet department and company goals and schedule. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. • Coordinate your work with shipping department to assure loads have been inspected and ready to ship. • Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. • General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time. • No accidents. A safe worker is an asset to both their fellow worker and the company. • Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. • Accept positive feedback from fellow workers and supervisors, on performance and competencies. HOURS - Friday - Sunday 5am - 5pm

Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients' underwriting processes. EXL's consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. ************************************************** Job Description EXL Risk Control is looking for self-directed independent contractors who possess excellent communication skills, computer proficiency, and a commitment to meeting client quality and timeliness standards. You will work from your own home or office, and service onsite survey/inspection assignments in the Bagley, MN area, and other locations within approximately 45 miles of Bagley. Responsibilities You will be responsible for scheduling on-site surveys and providing risk control reports to insurance industry clients. These reports contain information necessary to underwrite a commercial insurance policy and may include recommendations to control and/or correct potential loss producing conditions associated with that policy. You will be expected to manage assignments you accept, successfully secure customer appointments within a local territory and complete work assignments on time. Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients. The type of businesses we survey are commercial operations, including retail, restaurants, hotels, apartments, construction jobsites, churches, schools, etc. Most surveys are focused on assessing the business for Property and General Liability coverage, but we also service other commercial insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability, Inland Marine and Builders Risk. Qualifications Preferred experience in commercial insurance, real estate, inspection, construction, claim, loss control, underwriting, and/or fire and safety experience is a plus, but all interested candidates are encouraged to submit their qualifications. In lieu of experience, we can refer you to a 15-hour online certification option to qualify you. Fees are negotiable depending on experience and the unique aspects of selected jobs. Tools or Items You Must Provide: Digital camera or tablet Computer Printer High speed internet access Reliable vehicle Measuring device such as a laser, 100 ft. tape, or measuring wheel Auto and General Liability Insurance All interested candidates are encouraged to apply.

Job DescriptionSalary: $15ph Our Quality Inspectors are responsible for performing various tasks, including sorting, inspection, production, and data capture. They collaborate closely with customers to address and improve quality issues as efficiently as possible. Our organization aims to be the leading global provider of premium inspection and quality assurance services. Our inspectors work in diverse settings, such as manufacturing plants, warehouses, or other locations where customers' parts are produced or stored. The work location can change daily based on customer needs. Our teams emphasize responsiveness, accountability, and accuracy in all their work, with the company's success heavily reliant on the dedication and expertise of its people. Quality Inspector Job Responsibilities & Duties Performs various sorting, inspection, production, and data entry Reads and follows work instructions, work rules and directions Maintains organization and cleanliness of work area Uses inspection, measuring and test equipment as required Completes required training classes Follows all employee policies and other duties as assigned Quality Inspector Job Qualifications & Skills Demonstrated flexibility and adaptability in changing circumstances Exhibits a positive attitude and demonstrates self-motivation Strong attention to detail

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Quality Inspector Position Summary The Quality Inspector supports the production floor & reports to the Production Supervisor, ensuring product compliance to quality and industry specifications. 1st Shift: Monday - Friday 6:00am - 2:30pm Responsibilities Quality Inspector Responsibilities: * Conduct mechanical and visual inspections, reporting and isolating non-conforming product * Perform in-process inspections and document findings as required * Inspect finished products to determine conformance through inspections to specifications; conducting visual and dimensional testing; creating rejections for nonconforming products and confirming re-work. * Perform and document inspection results through paperwork review, completion of IP forms (inspection plan documents), enter data into data base when required, create shipping packets * Communicate quality issues to Supervisor Qualifications Desirable Requirements/Qualifications: * High school diploma or equivalent * 1 year of experience in a manufacturing environment * Understanding of ISO 13485 * Experience with measurement and testing equipment * Vision System experience a plus * Proficient in blue print reading rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $17.75 - USD $24.09 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: * Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements * Review drawings, specifications, and quality plans * Document inspections, test results, and non-conformance reports (NCRs) * Support field teams with quality assurance processes * Ensure adherence to safety protocols including LOTO and arc flash * Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: * Bachelor's degree in a related field (or equivalent experience) * Minimum 3 years of construction or field-related experience * Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam * OSHA 30 preferred (or willingness to obtain) * Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: * Competitive Pay * Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings * Employer-Paid Short- and Long-Term Disability Programs * Employer-Paid Life Insurance * Generous Paid Time Off Provisions * 401K Retirement Savings Plan with Company Match * Tuition Reimbursement * Fully Paid Parental Leave * Voluntary Products Including: Critical Illness Insurance and Accident Insurance * Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-based subsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce. We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicants will receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicable state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click here to review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced

Quality Control Inspector - 1st Shift, 7am-3:30pmPay: $20-$24/hour (Based on Experience) At our client, they don't just build components-they ensure quality at every step. As a Quality Control Inspector, you'll play a critical role in maintaining the excellence our customers depend on. If you're detail-driven, reliable, and ready to grow within a fast-paced manufacturing environment, this is your opportunity to make an impact. We are seeking a meticulous and motivated Quality Control Inspector for our 1st shift team. You will be responsible for performing Incoming, In-Process, and Final Inspections, using traditional metrology tools to ensure components meet required specifications and quality standards. Essential Duties and Responsibilities: Inspect alignment and dimensions of parts using ID/OD micrometers, height stands, and calipers Perform manual drafting to document dimensional requirements Verify parts against product specifications, drawings, and part lists Visually examine parts and document production results Ensure all inspections and records comply with the Quality Management System and Customer Requirements Confirm assembly completeness and identify missing or incorrect hardware Participate in ongoing training and maintain equipment certifications Required Competencies & Skills: Proficient with manual inspection tools (Micrometers, Calipers, Height Stands) Ability to read and interpret manufacturing drawings and blueprints Strong verbal and written communication skills Solid mathematical knowledge including geometry, trigonometry, fractions, decimals, and layout functions Excellent critical thinking, problem-solving, and time management abilities Adaptable and able to work both independently and as part of a team Preferred Qualifications: Valid driver's license Prior experience in a manufacturing or quality control environment Exceptional attendance record (required) Completion of Overhead Crane and Forklift Training (training provided upon hire if needed) Physical Requirements: Frequent standing, walking, climbing, stooping, kneeling, bending, and lifting (up to 50 lbs) Frequent use of hands, tools, and inspection equipment Occasional talking or hearing in a production setting

Job DescriptionSalary: $22 - $28 /hr + 10% Anteris is a science-driven structural heart company that is redefining expectations and advancing the field through cutting-edge solutions focused on restoring native-like physiology versus treating symptoms of structural heart disease. We are currently developing a new class of TAVR designed to mimic the performance of a healthy aortic valve. With offices in Minneapolis, MN, US; Geneva, Switzerland; and Brisbane and Perth, Australia, we have a growing and inclusive team. The Quality Control Inspection team plays a key role supporting our manufacturing operations at the Maple Grove site. This role is involved in a wide range of inspection tasks, where the primary goal is to assure that the products we produce are conforming to specifications and properly evaluated for compliance to visual, dimensional, functional, and various other specified requirements. The QC Inspector will be responsible for performing inspections in a highly regulated medical device development and manufacturing environment across all areas of standard work for the team (receiving inspection, first article inspections, label verifications, valve inspections, tissue inspections, pre-sterile product inspections, and sterile product inspections). This is a high visibility role with daily interactions across a wide range of peer groups in the Maple Grove site. Shift: Day Shift, Monday through Friday, 6:00 a.m. - 2:00 p.m. At Anteris Technologies, you'll be part of a team dedicated to enhancing the quality of life for patients with aortic stenosis through groundbreaking medical devices.Join us in our mission to revolutionize structural heart solutions. Primary Duties and Responsibilities Perform all duties listed below in strict compliance with the Anteris Quality Management System including Good Documentation Practices. Responsible for performing receiving inspection on material / products supplied to Anteris to ensure conformance to requirements and specifications. Perform microscope and other aided visual inspections on biological tissue based medical device products to ensure conformance to processing requirements and specifications. Perform machine / software-controlled inspections on products to ensure conformance to processing requirements and specifications. Perform inspections, as required by procedure, in support of first article inspections and label verifications. Perform physical and visual inspections on material, products, and/or packaging being processed for sterilization. Make an informed decision, based on training to tasks assigned, on the acceptance of materials, products, and inspected features, requirements, and specifications in all standard work tasks. Complete and maintain accurate records of inspection activities, including measurements, observations, results, conclusions, nonconformance issues, and full completion of quality record fields in support of standard work tasks. Collaborate with peers in Operations to effectively stay on plan, be mutually organized to goals, and communicate effectively through escalation channels as required. Other tasks assigned by group lead or designee. Skills, Knowledge, Experience & Qualifications Required Skills and Knowledge: High School diploma or equivalent. 2+ years overall experience in Medical Device (ISO 13485, FDA QSR) manufacturing environment. 1+ year's equivalent work experience directly applicable to Primary Duties and Responsibilities listed above. Strong attention to detail and experience in reading, interpreting, and comprehending product requirement documents and specifications. Experience in learning and cross-training on widening set of responsibilities in a team-based environment. Experience working directly with computers to input data, perform electronic based work tasks, complete training, and manage email communications. Effective verbal and written communication Ability to work in a fast-paced environment. Effective problem-solving and troubleshooting skills. Preferred Skills and Knowledge: Vocational or technical training in assembly, sewing, or inspection of biological tissue based medical devices. Vocational or technical training in the use of microscopes, including the use of specialized reticles and/or tappi charts. Vocational or technical training in the use of MicroVu optical inspection systems. Vocational or technical training in Lean or 5S principles. Vocational or technical training in GD&T principles and specification designs. What We Offer: Opportunity to make a significant impact on the healthcare industry by advancing groundbreaking therapies. Collaborative and dynamic work environment with a culture of innovation and excellence. Competitive compensation package, including salary, performance-based bonuses, and stock options. Career development opportunities and a chance to be part of a growing company that values its employees. Health and Wellness Offerings: Medical, Dental, and Vision Plans Flexible Spending Account (FSA) 401k + Company Match Life, AD&D, Short Term and Long-Term Disability Insurance Bonus Plan Eligibility Employee Equity Program Paid Holidays & PTO Employee Assistance Program Inclusive Team Environment Note: We may require proof of COVID-19 vaccination to comply with the state, local municipality, and/or travel regulations. Anteris Technologies recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. We have a clear vision: to be a place of belonging for all humans by promoting diversity, multiculturism and inclusion, as a goal and reflection across the organization. Diversity is more than a commitment - it is part of our mission to deliver the best structural heart products on a global scale. By applying to this position, you consent to receive text messages from the Anteris Talent Acquisition team regarding your application. Message and data rates may apply. You may opt out at any time by replying STOP.

Benefits 401(k) with company matching• Health, dental, and vision insurance• Health savings account (HSA)• Paid time off• Employee assistance program (EAP)• Referral program 4 x 10 hour shifts Monday-Thursday Culture We foster a collaborative and positive work environment where clear and respectful communication is valued at every level. We actively embrace change by encouraging cross-functional improvements that enhance operational efficiency and product quality. Our team members are expected to listen thoughtfully to the ideas and concerns of others, respect confidentiality, and consistently embody our core values: Integrity, Trust, Creativity and Courage, Teamwork, and Excellence. Position Summary: We are seeking a meticulous and dependable Quality Control Inspector to join our team. The QCInspector will be responsible for conducting in-process and final inspections to ensure that parts,assemblies, and finished products meet internal quality standards and customer specifications. This role plays a key part in identifying non-conformities, maintaining documentation, and supportingcontinuous improvement within a fast-paced production environment Key Responsibilities In-Process Inspection• Perform inspections at various stages of manufacturing to verify dimensional accuracy,workmanship, and compliance with drawings and specifications.• Monitor and document production processes to ensure consistency and control.• Collaborate with machine operators and production personnel to identify and resolve qualityissues early in the process.• Record and communicate any discrepancies or deviations found during in-process checks.Final Inspection• Conduct final product inspections prior to shipment to verify compliance with all customer andinternal requirements.• Review travelers, inspection records, and customer documentation for job completionaccuracy.• Identify and document non-conforming materials, ensuring proper disposition per qualityprocedures.• Approve final product release and verify all required documentation is complete and accurate. Qualifications High school diploma or GED required; technical certification in Quality or Manufacturingpreferred.• 2+ years of quality inspection experience in a manufacturing environment (machining ormetalworking preferred).• Proficiency in interpreting mechanical drawings and GD&T.;• Skilled in the use of standard measuring and inspection equipment.• Strong documentation, analytical, and communication skills.• Detail-oriented, self-motivated, and capable of managing time effectively.• Working knowledge of quality management systems (e.g., ISO 9001) preferred.• Experience with ERP or quality software systems (e.g., NetSuite, IQMS, or similar) a plus.Culture• Foster a collaborative and positive work environment with clear and respectful communication.• Encourage and implement cross-functional improvements to enhance operational efficiencyand product quality.• Listen respectfully to feedback and ideas.• Maintain confidentiality and uphold company values: Integrity, Trust, Creativity and Courage,Teamwork, and Excellence. General Quality Control Duties Use precision inspection tools such as calipers, micrometers, height gauges, indicators, andoptical comparators.• Read and interpret blueprints, GD&T;, engineering drawings, and specifications.• Maintain accurate inspection records and detailed reports.• Collaborate with Quality Engineers and Supervisors on root cause analysis and correctiveactions.• Support internal audits and maintain compliance with ISO 9001 or other applicable quality systems. Working Conditions Fast-paced manufacturing environment.• Requires standing, walking, and lifting for extended periods.• May involve exposure to noise and varying temperatures.• Occasional lifting of up to 50 lbs.Attendance Requirements Regular and consistent attendance is mandatory. Accommodations Essential functions may include lifting, reaching, bending, stooping, twisting, kneeling, crouching,carrying objects, ascending/descending stairs, and commuting to the work location.Job TypeFull-time, In-Person (Osceola, WI) Shift AvailabilityDay Shift

Requirements Qualifications High school diploma or equivalent required. College degree preferred. Ability to read blueprints and exploded-view drawings. Exercise common sense when making decisions. Working knowledge of tools, methods, and concepts of quality assurance. Exceptional written and verbal communication skills. Physical Requirements Continuous speaking, hearing, and visual (including close vision, distance vision, depth perception, and ability to adjust focus) effort Frequent standing, crouching, stooping, kneeling, reaching, climbing, and handling Commonly lifting/moving of up to 40 lbs. individually Occasionally lifting/moving 50-100 lbs. with assistance Exposure to loud noises, drilling, cutting, banging, and typical manufacturing production physical hazards

PCB Manufacturing | QC Inspector Scope: Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: Be able to complete AS 9102 Reports Perform Final Inspection on finished product to ensure compliance to customer requirements. Read customer drawings Perform measurements with measurement tools such as calipers, micrometers, and pin gages. Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding Verify acceptability of rework after completion Identify and mark non-conforming product to ensure it is not delivered Prepare standard and AS9102 First Article Reports as needed Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product Complete Deliverables for Customers and ensure they are complete and accurate Complete department logs and record yield data as required Perform preventative maintenance as defined by department maintenance schedule Support other work areas or departments as required by production or management. Ability to work overtime as requested Keep work area clean and organized Requirements: Essential Qualifications, Education and Experience: High school diploma or equivalent One year of Quality Control experience Knowledge of AS 9100 Strong work ethic Ability to work effectively in a team environment Physical Requirements: Prolonged periods sitting and performing visual and manual tasks. Fine motor skills Ability to use microscopes for long periods of time performing job duties AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC).Compensation: Exact compensation may vary based on skills, experience, and location. About AdvancedPCB, AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features 6 total manufacturing sites: Santa Clara, our headquarters in the heart of the Silicon Valley; 2 in Southern California, 1 in Maple Grove, Minnesota, Aurora, Colorado and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Visit us!*********************

Job Description Why Kendall Howard? We're a growing IT manufacturer with a no-nonsense attitude: stay humble, work hard, and take on challenges head-first. Around here, you won't just “do your job” - you'll be part of a team that builds, solves, and delivers products we're proud to put our name on. The benefits and pay are solid, but the real perk is being part of something that matters alongside people who care just as much as you do. Our Benefits We know benefits matter, and we've got you covered. Full-time employees enjoy: Medical, Dental & Vision coverage Supplemental insurance options 401(k) with company match Paid Time Off (PTO) Paid holidays Job Summary: The Quality Control Inspector is accountable for the practical application of the internal Quality Control System. This position ensures that the quality standards as defined by the designers are being met on the shop floor as well as with materials and services supplied by outside vendors. Essential Functions: Perform in-process and final inspection activities to ensure all products are manufactured in compliance with work order, traveler, and blueprint specifications. Develop and maintain inspection reports and documentation. Measures all parts according to blueprint using Vernier caliper, micrometer, protractor, height gauge, hole and thread gauge, and other tools as needed. Aids in troubleshooting problems during inspection activities and recommends corrective actions to resolve issues. Follow up on all cases involving product issues and provide resolution recommendations to Quality Manager, Lean Coordinator, Plant Manager, or Engineering Manager Maintain periodic inspection schedules to ensure spot checking of production quality. Maintain 3rd party inspection process. Maintain the returns and reject re-distribution and scrap procedures. Minimum Qualifications 1-4 years of experience in the quality field Experience with blueprints and calibrating measurement tools is required. Good Oral and written communication skills. Understanding of the manufacturing process. The ability to work with minimal supervision. Strong time management skills. Monday-Friday

Anteris is a science-driven structural heart company that is redefining expectations and advancing the field through cutting-edge solutions focused on restoring native-like physiology versus treating symptoms of structural heart disease. We are currently developing a new class of TAVR designed to mimic the performance of a healthy aortic valve. With offices in Minneapolis, MN, US; Geneva, Switzerland; and Brisbane and Perth, Australia, we have a growing and inclusive team. The Quality Control Inspection team plays a key role supporting our manufacturing operations at the Maple Grove site. This role is involved in a wide range of inspection tasks, where the primary goal is to assure that the products we produce are conforming to specifications and properly evaluated for compliance to visual, dimensional, functional, and various other specified requirements. The QC Inspector will be responsible for performing inspections in a highly regulated medical device development and manufacturing environment across all areas of standard work for the team (receiving inspection, first article inspections, label verifications, valve inspections, tissue inspections, pre-sterile product inspections, and sterile product inspections). This is a high visibility role with daily interactions across a wide range of peer groups in the Maple Grove site. Shift: Day Shift, Monday through Friday, 6:00 a.m. - 2:00 p.m. At Anteris Technologies, you'll be part of a team dedicated to enhancing the quality of life for patients with aortic stenosis through groundbreaking medical devices. Join us in our mission to revolutionize structural heart solutions. Primary Duties and Responsibilities Perform all duties listed below in strict compliance with the Anteris Quality Management System including Good Documentation Practices. * Responsible for performing receiving inspection on material / products supplied to Anteris to ensure conformance to requirements and specifications. * Perform microscope and other aided visual inspections on biological tissue based medical device products to ensure conformance to processing requirements and specifications. * Perform machine / software-controlled inspections on products to ensure conformance to processing requirements and specifications. * Perform inspections, as required by procedure, in support of first article inspections and label verifications. * Perform physical and visual inspections on material, products, and/or packaging being processed for sterilization. * Make an informed decision, based on training to tasks assigned, on the acceptance of materials, products, and inspected features, requirements, and specifications in all standard work tasks. * Complete and maintain accurate records of inspection activities, including measurements, observations, results, conclusions, nonconformance issues, and full completion of quality record fields in support of standard work tasks. * Collaborate with peers in Operations to effectively stay on plan, be mutually organized to goals, and communicate effectively through escalation channels as required. * Other tasks assigned by group lead or designee. Skills, Knowledge, Experience & Qualifications Required Skills and Knowledge: * High School diploma or equivalent. * 2+ years' overall experience in Medical Device (ISO 13485, FDA QSR) manufacturing environment. * 1+ year's equivalent work experience directly applicable to Primary Duties and Responsibilities listed above. * Strong attention to detail and experience in reading, interpreting, and comprehending product requirement documents and specifications. * Experience in learning and cross-training on widening set of responsibilities in a team-based environment. * Experience working directly with computers to input data, perform electronic based work tasks, complete training, and manage email communications. * Effective verbal and written communication * Ability to work in a fast-paced environment. * Effective problem-solving and troubleshooting skills. Preferred Skills and Knowledge: * Vocational or technical training in assembly, sewing, or inspection of biological tissue based medical devices. * Vocational or technical training in the use of microscopes, including the use of specialized reticles and/or tappi charts. * Vocational or technical training in the use of MicroVu optical inspection systems. * Vocational or technical training in Lean or 5S principles. * Vocational or technical training in GD&T principles and specification designs. What We Offer: * Opportunity to make a significant impact on the healthcare industry by advancing groundbreaking therapies. * Collaborative and dynamic work environment with a culture of innovation and excellence. * Competitive compensation package, including salary, performance-based bonuses, and stock options. * Career development opportunities and a chance to be part of a growing company that values its employees. Health and Wellness Offerings: * Medical, Dental, and Vision Plans * Flexible Spending Account (FSA) * 401k + Company Match * Life, AD&D, Short Term and Long-Term Disability Insurance * Bonus Plan Eligibility * Employee Equity Program * Paid Holidays & PTO * Employee Assistance Program * Inclusive Team Environment Note: We may require proof of COVID-19 vaccination to comply with the state, local municipality, and/or travel regulations. Anteris Technologies recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. We have a clear vision: to be a place of belonging for all humans by promoting diversity, multiculturism and inclusion, as a goal and reflection across the organization. Diversity is more than a commitment - it is part of our mission to deliver the best structural heart products on a global scale. By applying to this position, you consent to receive text messages from the Anteris Talent Acquisition team regarding your application. Message and data rates may apply. You may opt out at any time by replying STOP.

Job DescriptionJoin our client's team in Kansas City! Are you passionate about ensuring airworthiness and safety in aircraft maintenance? Our client, a leading aircraft component service organization, is seeking a Quality Control Inspector with a keen eye for detail. If you thrive on precision and excellence, this role is perfect for you.Job Summary: As a Quality Control Inspector, you will play a crucial role in ensuring all maintenance work meets airworthiness standards and regulatory requirements. You will conduct various inspections on aircraft components to determine serviceability and airworthiness, ensuring compliance with technical data and documentation standards. Responsibilities: Perform preliminary, routine, and in-process inspections on aircraft and components. Document maintenance activities following relevant regulations and standards. Conduct final buy-back of maintenance and issue airworthiness releases. Monitor compliance with safety regulations and scrap bin policies. Provide oversight, guidance, and assistance on the floor. Conduct facility audits for regulatory compliance. Complete OJT documentation and maintain training records. Qualifications: Minimum three years of heavy aircraft maintenance or aircraft component maintenance experience. FAA Airframe and Powerplant (A&P) License required. Knowledge of technical and regulatory documentation interpretation. Strong communication skills and ability to work effectively in a team. Proficiency in MS Office and basic computer skills. Ability to work various shifts and schedules. Prior NDI and QC experience preferred. Benefits: We offer a competitive hourly rate, full benefits package, and a dynamic work environment that fosters growth and development. If you are ready to take the next step in your aviation career, apply now for the Quality Control Inspector position at Kansas City.

Job DescriptionSalary: Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements Review drawings, specifications, and quality plans Document inspections, test results, and non-conformance reports (NCRs) Support field teams with quality assurance processes Ensure adherence to safety protocols including LOTO and arc flash Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: Bachelor's degree in a related field (or equivalent experience) Minimum 3 years of construction or field-related experience Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam OSHA 30 preferred (or willingness to obtain) Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: Competitive Pay Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings Employer-Paid Short- and Long-Term Disability Programs Employer-Paid Life Insurance Generous Paid Time Off Provisions 401K Retirement Savings Plan with Company Match Tuition Reimbursement Fully Paid Parental Leave Voluntary Products Including: Critical Illness Insurance and Accident Insurance Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-basedsubsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce.We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicantswill receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicablestate and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable.Click hereto review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced

The Quality Technician will support manufacturing operations utilizing Wabash Quality disciplines, processes, and tools with the objective of improving operating performance and ensuring our products meet the customer's needs and expectations. The Quality Technician will work with the Wabash Quality Philosophies in mind with a focus on risk mitigation, error proofing, and problem solving. Essential Duties and Responsibilities: B elow are examples of the type of duties you could be responsible for: Adheres to and promotes the safety objectives of the organization Provide leadership and training in supporting the Quality system To assist the manufacturing team in improving quality and mistake proofing processes Collect data, perform capability studies/reports, interpret charts and solve problems, grading, snow plowing, and other such tasks Support a variety of manufacturing operations using various quality tools and techniques such as inspecting, gathering data, containment, problem solving, help implement problem resolutions and follow up on actions. Must be willing to work flexible shifts/hours as required Data collection, and documentation support Process Audits Manage the measurement and test equipment, torque wrenches, dial calibers, weld gages in calibration database Conduct PPAP (Production Part Approval Process) functional and dimensional trials Processing nonconforming material and conducting receiving inspection Work with engineers, supervisors, and shop personnel to ensure work is done to specific procedures and customer specifications. Issue Inspection Forms and enforce in-process record keeping. As a standard practice for continual improvement of quality, question any condition that appears to be sub-standard even if not defined in inspection documents, Respond to shop requests for inspection assistance with a sense of urgency; routinely perform all inspections and documentation completely and in ethical manner Become familiar with the latest applicable mandatory ASME Code and National Board specifications. Become familiar with the applicable 3-A Sanitary Standards. May be required to train, lead, and/or direct the work of others. Follow up on identified nonconformities (Rework and Warranty) to ensure proper resolution and action taken to prevent in the future. Maintain up-to-date files of inspections records, test certifications, documents, reports, etc. Suggest improvements or alternative methods and materials to reduce cost and/or improve quality. Always follow established safety procedures and policies. Works closely with other members of business unit to meet the units' strategic objectives. Assist with coordinating and administering company policies and programs. Performs other duties as apparent or assigned. Performs and leads WMS Problem Solving and Audits. Approve or reject components and products at various stages of the production process from receiving through final test and shipment including communicating, documenting and disposition of nonconformities. Follow up on identified nonconformities in production to ensure their proper completion. Question any conditions that appear to be sub-standard, even if not defined in inspection documents, as a standard practice for continual improvement of quality. Interface with employees, customers, and vendors in an effective manner to ensure that quality requirements are properly conveyed and achieved. Assist other Quality members as required. May lead and direct the work of others. Keep Production Supervisor and Q.C. Manager/Supervisor advised of any quality problems, concerns, delays, etc. Advise Supervisor of any required maintenance work. Maintain an orderly and safe work environment. Suggest methods improvements or alternate methods and materials to reduce cost and/or improve quality Confirms and Completes Tanks for Final in SAP Tools & Equipment: Below is a list of examples of the potential tools and equipment you may find yourself working with depending upon your department and location. Wabash provides all the necessary training for you to feel comfortable and confident to excel at your new career with us. Computer iPad Flashlight Radio Tape Measure SAP software Email Other various test equipment Microsoft Office PMI Gun All Hydro equipment and gauges Alignment testing equipment Light and brake testing equipment Black Light for L.P.E 3 Testing Qualifications: 4 years' manufacturing experience Experience with Microsoft applications programs -- Excel, Word, Outlook, PowerPoint, SharePoint Competent in basic Mathematics and English High School degree or G.E.D equivalent. Problem Solving experience preferred (8D, 5 Why, etc.) Understand basics engineering concepts, fit, form, and function Must have both good written and verbal communication skills Must have analytical skills and be able to exercise independent judgment Ability to read and interpret technical data and engineering drawings is required Experience reading and using a variety of precision measuring instruments preferred Must be able to direct and influence the actions of others within areas of responsibility Ability to function under pressure and maintain professionalism Ability to interact with management, customers, and suppliers Ability to train others individually and in a group setting Must be able to pass a pre-employment drug screen.

Job Description The Quality Control Inspector II plays a vital role in ensuring that products meet all design and contract requirements as defined by engineering drawings and specifications. This position is actively involved in first article, pre-production development, production, and incoming inspection stages of manufacturing and assembly. The Quality Control II Inspector is responsible for verifying product conformance through detailed inspections and documentation, ensuring all assembly, final inspection, and incoming inspection activities are complete and accurate. Once verified, products are cleared for movement into inventory and/or shipment. Responsibilities Performs inspection activities, such as complex visual and dimensional inspections on incoming, final inspections, first article inspections as well as during in-process inspection. Ensure all Quality Control documents, such as travelers and inspection sheets, are maintained daily, with all entries kept up to date and accurate. Prepare and create inspection documents such as written description of inspection results including deviation from engineering specification. Manage and assigned inspection priorities based the customer PO due dates. All shop floor and suppliers originated non-conformance (NCMR log) to be written by the Quality Control Inspector I and II for the product/processes, except for those written by QM or QA. Assists QA's with identifying nonconforming conditions that present existing or impending defective conditions at the system or subsystem level of assembly or incoming inspection, audits and preparing inspection plans such as creating inspection documents and routing, updating inspection documents and routing, and data collection and root cause analysis investigations. Provides general support of QA's including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, 8D, statistical studies. Participates and supports problem solving activities such as Fishbone, 5-Why, Fault-tree, etc. Perform material movement transactions after completing inspection process. Use calipers, micrometers, HI-POT tester, continuity test board, thread gauges, height gauges, gauge blocks, tape ruler, steel ruler and other related inspection equipment to perform the work. Prepare inspection reports, Certificate of Conformance, and assist with FAI (First Article Inspection) reports and customer certification requirements. Communicate project status and quality challenges with department managers/leads. Guide less experience inspectors, providing solutions and maintaining rigorous quality control procedures. Support production teams in adhering to ISO 9001 processes. Participate in audits and compliance projects as assigned. Follow applicable procedures and work instruction while offering ideas for improvement. Work with cross-functional teams to ensure quality objectives are met throughout the production process Other duties as assigned Accepting this position requires candidates to complete and pass a background check.

SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS

Blattner is looking for Quality Control Inspectors to help us build.Job Description A DAY IN THE LIFE Perform inspections, tests, and field audits Document and report all inspection, testing, and auditing activities performed Work to ensure all construction work is completed as defined within the scope of Blattner standards, by referencing specifications from engineering designs/drawings, OEM manuals, and other codes or applicable standards WHAT YOU'LL NEED High school diploma or general education degree (GED); or equivalent combination of education and experience One-to-two years of related inspector experience Ability to read and understand engineering plans and specifications WHAT WILL SET YOU APART Renewable energy quality inspection experience Ability to identify and resolve problems in a timely manner, and gather pertinent information skillfully Familiar with root cause analysis and problem-solving techniques WHAT'S IN IT FOR YOU **All full-time, non-union employees are eligible for the following benefits (including full-time interns; part-time interns are excluded) 100% employer-paid HDHP insurance premiums for employees 100% employer-paid dental insurance premiums 401(k) with company match Vision insurance Education assistance (tuition reimbursement) Employee/family focused culture And more! Pay Range: $22 - 25 per hour; per diem based on eligibility Individual compensation to be determined based on the applicant's applicable experience and qualifications balanced against internal equity and by specific location in alignment with applicable pay laws and regulations. Compensation is just one factor of our overall benefits package. WHO ARE WE? Blattner Company is a leading renewable energy contractor and service provider with utility scale wind, solar, and energy storage projects across the United States. Be a part of something bigger and join the Blattner team - Leading America to a clean energy future! Blattner is an Equal Employment Opportunity Employer committed to diversity and inclusion in the workplace. Blattner will not tolerate discrimination against any applicant for employment or employee on the basis of age (40 and over), ancestry, color, religious creed, gender, gender expression, gender identity, genetic information, marital status, medical condition, mental disability, military or veteran status, national origin, physical disability, race, receipt of public assistance, sex, sexual orientation, or any other status protected by federal, state, or local laws. This commitment governs all aspects of employment including, but not limited to: hiring, promotion, demotion, transfer, layoff, termination, compensation, discipline, and access to benefits and training. Additionally, Blattner is committed, in accordance with applicable law, to making reasonable accommodations for job applicants and employees based on a qualifying disability, a sincerely held religious belief or practice, and for pregnancy, childbirth or related health conditions. Applicants and employees who feel they have experienced or witnessed discrimination or who wishes to request a reasonable accommodation should contact the Human Resources Department. Blattner prohibits retaliation against any individual for making a complaint under this policy, for opposing discrimination, for participating in an investigation pursuant to this policy, or for requesting a reasonable accommodation.

As a valued Trelleborg team member, you will enjoy: Greater opportunity for impact Competitive compensation Generous benefits package: Health, Dental, Vision, STD, LTD, Life, 401k Paid time off Bonuses Pay and Schedule: $19 - $24 per hour Hours: 6:00am - 2:30pm Monday through Friday Qualifications: High School diploma or equivalent Required: 0-3 years' experience in manufacturing environment Desired: Experience with clean room manufacturing Responsibilities: Conducts inspections to ensure compliance with product specifications. Inspections include visual, dimensional, functional, and physical testing on product from all departments. Performs all duties per appropriate work instructions. Completes required documentation. Verifies packaging and documents for shipping parts. Performs accurate data entry. Collaborates and gathers documentation or data, tests product or materials for root cause analysis, investigations, and drives continuous improvement activities. Communicates orally in a professional, courteous manner. Written communications should be clear and concise. Serves as a good team player. Uses Lean Enterprise methods to reduce waste and complexity in all processes and organizes work area. Ensures work area is clean and safe. Assists with filing or scanning for QA Dept. Able to accurately scan processing records to computer files for archiving.