Quality inspector jobs in Laredo, TX - 1,523 jobs

About the job QC inspector QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details

IRISNDT is currently seeking a NACE CIP Level 1 and Level 2 Inspectors for a full time, call out positions. The Coating Inspectors shall possess knowledge and skills relating to the application of protective coatings to pipelines, fabricated piping, and storage tanks. The inspector should be familiar with and have experience in applying protective coatings, operating lest equipment, monitoring the application of the coatings, and enforcing company, industry and manufacturers specifications. The inspector must be familiar with safety standards applicable to coating applications as set forth in OSHA Construction Industry Standards. Primary Functions: • Performs assigned routine tests on materials, services in process, or finished projects where results are compared with company quality standards. Reports results to supervisor who will make an analysis and take necessary action. • Inspects visually for obvious defects. • Performs detailed visual inspection when necessary to determine quality of prodcut/service where limits are not clearly defined. Identifies defective work and helps put corrective actions in place. • Records results on inspection forms or charts and reports number of defects found. Posts and maintains forms and charts of inspection data, quality levels, or special quality studies. • May act as quality control department clerk, maintaining all quality records for facility. • Verifies that all materials used in the performance of the job assignment are in compliance with Client Company requirements. • Cooperates and works closely with the Repair/Cut-Out Welding Inspector, NDT and Contractor's Representative to assure that no repairs or cutouts are coated and lowered-in. • Assures that all specifications and safety standards are adhered to. • Records and reports material usage and waste. Qualification & Skill Requirements: High School Diploma or equivalent is required Minimum of two (2) years of experience in the application or inspection of coating in the petroleum or chemical industries, or One (1) year experience in the application or inspection of coating and either NACE CIP level 1 certification or SSPC PC1 level 1 certification. Current NACE CIP Level 1 or Level 2 certification required API 510/570 certifications considered an asset Valid TWIC card required Valid Driver's License and pre-access drug and alcohol testing required Pre-employment background checks will be required Please note: API 1169 Certification is required for all Inspectors by January 1, 2019. Physical Requirements: Move, carry, and lift objects 50 lbs. or more. Must be able to walk, stand, bend, reach, and climb. Must be able to work indoors and outdoors in all weather conditions. Benefits: Dental Insurance. Vision Insurance. Health Insurance. Paid Time Off. 401(K) W/Matching. Flexible Spending Account. Health Savings Account. About IRISNDT: IRISNDT is a tech-enabled value-adding service provider of Non-destructive Testing (NDT), Advanced NDT, Inspection, Asset Integrity Engineering, Software, and Specialized Mechanical Services to the chemical and petrochemical, refining, renewables, power, mining and other diverse end markets in the USA, Canada, the United Kingdom, and Australia. Join IRISNDT to build a promising career. Our dynamic environment offers advanced technology and ongoing learning, placing you at the forefront of industry innovation. We prioritize a strong safety culture and invest in our team, promoting a family-friendly workplace and internal career advancement. With IRISNDT, elevate your career where progress and excellence converge. We boast a team of over 2,000 dedicated staff members worldwide, our growth has been driven by seasoned management, robust technical expertise, and an unwavering commitment to exceeding customer expectations. For more information, visit our website at **************** NOTE: To be considered, applicants must be able provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification.

A Construction Quality Inspector at Butler-Cohen supports commercial and industrial construction projects by assisting with inspections, documentation, and coordination to ensure installed work meets Butler-Cohen standards, project specifications, and industry best practices. This is an ideal role for individuals seeking hands-on experience and opportunity for growth in quality assurance. Responsibilities Assist with scheduled inspections to verify/identify compliance with plans, specifications, and safety standards. Collaborate with superintendents and project managers to understand project specifications, goals, and timelines. Assist with quality control, site safety initiatives, and coordination of trade partners as delegated by the project superintendent. Interpret and review design drawings, specifications, and other technical documents for project related QAQC requirements/criteria. Report any safety incidents or violations. Coordinate with various stakeholders, including architects, contractors, and subcontractors on layout discrepancies between drawings, in field work, and existing conditions. Compare material deliveries with approved product data submittals and shop drawings for compliance. Inspect materials delivered to the job for quantity, quality, and condition and report on missing and/or damaged items. Conduct quality assurance inspections and audits, reporting any non-conformance issues and documenting as observations. Ensure that all relevant construction documents are available on-site for reference. Participate in preparatory phase and coordination meetings to understand subcontractor mean and methods for compliance with specifications and industry best practices. Work closely with project teams to resolve issues that may impact quality and integrity of installed work. Maintain clear and open communication by providing regular updates on progress, challenges, and resolutions between the construction site and project management. Education/Experience Required Bachelor of Science in Construction or 2 year's experience performing quality assurance related tasks and responsibilities. Skills/Abilities Required Basic understanding of construction principles, practices, and techniques. Good communication and interpersonal skills. Proficiency in using construction management software, Microsoft office suite, and relevant reporting tools. Knowledge of safety regulations and best practices in the construction industry. Able to access entire jobsite including stairs, scaffolding, ladders, elevation changes, etc. Can work in physical positions including kneeling, sitting, standing, squatting, bending over, etc. Must be able to travel to job sites Must be able to move, carry, or position items weighing up to 50 pounds The ability to establish and maintain a positive and professional working relationship with individuals at all levels of the company including client representatives and subcontractors. Must have the ability to work flexible hours including weekends. Able to work in all elements of the outdoor environment which include the heat, cold, rain, snow, wind, etc.

Job Description TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Laredo, TX. Pay is $17.00 hr, $0.75 shift premium for 2nd shift Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability to walk and stand for long periods of time Ability to bend, lift, twist and move freely Ability to periodically lift/move up to 50 pounds Must have reliable transportation Values & attitudes Global team spirit Team player Caring for people Open-minded Excellence Reactive Resilient to pressure Rigorous Customer focus Client oriented Reliable & trustworthy Flexible Initiative Autonomous Innovative Daring Work experience Overall recommendations No experience necessary Ability to read blueprints a plus Education background Overall recommendations High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability. Job Posted by ApplicantPro

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Laredo, TX. Pay is $17.00 hr, $0.75 shift premium for 2nd shift Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development * Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations * Check/inspect manufactured parts or products for defects * Read and follow work instructions and general processes * Use measuring or testing equipment as needed * Ensure products meet quality standards * Display excellent customer service * Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management * Collect and record data Technical * Utilize company portal for time recording and policy acknowledgements Other * Any other duties as assigned Knowledge, skills, abilities Hard skills * Must be able to speak and read in the English language * Good communications skills * Must be able to multi-task * Ability to work in a fast-paced environment * Ability to handle sensitive and confidential material * Ability to walk and stand for long periods of time * Ability to bend, lift, twist and move freely * Ability to periodically lift/move up to 50 pounds * Must have reliable transportation Values & attitudes Global team spirit * Team player * Caring for people * Open-minded Excellence * Reactive * Resilient to pressure * Rigorous Customer focus * Client oriented * Reliable & trustworthy * Flexible Initiative * Autonomous * Innovative * Daring Work experience Overall recommendations * No experience necessary * Ability to read blueprints a plus Education background Overall recommendations * High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

Job Title: Distribution Inspector Level 3Location: El Paso, TXDuration: Long TermDescription:· Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. · Work shall be performed in accordance with Company standards and 49 CFR 192· Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications:· Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on poly fusion projects. · Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, TVC, and ONE MAP. · CPWI· API 1169· Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. · Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Amarillo Gear Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. SCOPE: The Tool Specialist will provide assistance with CNC machine tooling (tool bodies, inserts, endmills, grinding wheels, etc.) and hand tooling (wrenches, hardware, etc.) for the manufacturing plant. They will be responsible for organizing, inventorying, and repairing tooling in the tool crib, ordering special tooling, sending off tooling to be repaired, setting up and maintaining tool setup package carts for various work-centers, and assisting with part changeover at various CNC machines. They will work with different departments to improve production flow and on-time delivery throughout the entire manufacturing plant. EDUCATION REQUIREMENTS/ EXERIENCE: * 2+ years of hands-on programming experience preferred * Ability to write and understand machine code preferred * Inventory experience * Be comfortable in a fast-paced environment * Some experience with CAD/CAM software, such as Autodesk Fusion * Strong communication and documentation skills, with the ability to communicate with machinists on machine processes * Highly proficient in Microsoft Office (Excel, Word, Access, PowerPoint, etc.) * Mathematically inclined RESPONSIBILITIES: * Ensure each CNC machine has all the tooling required to manufacture various parts ahead of time to help production flow smoothly through the shop. * Coordinate tool tests with the CNC Programmer and report CNC programming changes that need to be made to improve tool life and part quality. * Clean up extra unused tooling at each work-center and inventory it to be sharpened or reused. * Set up tool packages for CNC machine changeovers to ensure CNC operators have all tooling they need to perform quick changeovers. * Inventory current tooling used at work-centers (such as custom-made boring heads) to help identify where spare tooling will be required to help production flow. * Assist the CNC operators in part changeover duties in pit-crew style changeovers to help the changeover go quicker and smoother. * Help complete program changes/transfers when CNC Programmer needs support. * Perform other duties, as assigned. REQUIRED PHYSICAL DEMANDS: * Standing for more than 1 hour, walking more than 100 ft., reach above, at or below shoulders, climb stairs, bend, stoop, and/or squat, grasping, hand/wrist twisting, lifting of up to 50lbs. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a part time petroleum inspector, to join our Caleb Brett team, working Onsite from El Paso, TX. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award-winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The full time time petroleum inspector is responsible for volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, etc. This position will involve traveling to client locations for onsite inspections. Shift/Schedule: Full Time plus the availability to work on-call hours What you'll do: Understand and adhere to Caleb Brett safety procedures. Seal Tanker Trucks at 3rd party terminals. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. Perform routine equipment calibrations, verification and function checks. Verify and communicate the results obtained and to make the entries into the appropriate media. Provide on the job assistance and receive training from more experienced inspectors. To communicate and coordinate with terminal, transport and Company personnel to promote smooth exercise of duties assigned. To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. To perform routine equipment calibration, verification and function checks. To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. To maintain work areas, records and equipment in a clean, organized and functional condition. To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Must have basic grasp of basic mathematics and work in an automated environment. Ability to work on an on-call basis. Cannot have a fear of heights. Ability to climb ladders and stairs for shore tanks. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks. Ability to perform visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges and ships. Ability to complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks. Ability to perform routine equipment calibrations, verification and function checks. Ability to verify and communicate the results obtained and to make the entries into the appropriate media *Valid driver's license and reliable driving record (required) Model Intertek's 10X Energies at all times within the work place, practicing business the right way. Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Ability to travel as business needs dictate. Physical requirements to include: Lifting, walking, standing, reaching, bending, stooping, climbing, squatting and driving. Preferred Requirements & Qualifications: IFIA certified is a plus! TWIC is a plus!

AMERISPEC INSPECTION SERVICES IS INTERESTED IN HIRING THE NEXT GREAT INSPECTORS IN EAST TEXAS & LOUISIANA! Do you have what it takes to be that person? AmeriSpec Inspection Services is looking to hire Full Time Professional Inspectors. About AmeriSpec: We are a family owned and locally operated company that provides quality inspection services for our clients here in East Texas and Louisiana. We are committed to providing our staff the training, knowledge, and tools needed to be successful in the field while providing the excellent service that our clients demand. Essential Duties and Responsibilities: include the following. This position independently completes home inspections and ancillary services from start to finish. Other duties may be assigned. Attend annual regional AmeriSpec conferences Experience in Remediation, Water Damage, Trades, and/or an allied craft a plus Experience in writing protocols a plus Valid Driver's License and clean driving record Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Willingness to maintain records and communicate with Marketing Manager and Office Manager about job tasks Willingness to perform onsite educational seminars for real estate agents and other local professionals Willingness to comply with the State of Texas and governing agencies for licenses held Willingness to comply with the State of Louisiana Home Inspector Laws & Regulations and gain licensing in that state Perform other related duties as assigned Assist in marketing efforts as directed by a Marketing Representative Possess good communication skills and good computer skills Develop and maintain alliances with successful area real estate agents Work closely with Owner and/or Senior Inspectors to learn the essentials of Commercial & Home Inspections along with Mold Assessments and Protocols Independently perform home inspections from start to finish Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with little to no supervision. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's Degree or equivalent from four-year college or technical school; or six months to one year experience as an AmeriSpec Associate Inspector; Completion of state requirements by an approved TREC provider; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: Must be TREC licensed and willing to be licensed in the State of Louisiana Must comply with applicable state licensure requirements and continuing education Must be willing to receive ongoing training and licensing for our ancillary services that we offer Other Skills and Abilities: Good communication skills Ability to work independently Ability to learn new information Ability to learn new skills Relationship building Time management Organizational skills Mentoring and coaching skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is also regularly required to talk and/or listen. The employee is frequently required to stand, to walk, and to reach with hands and arms. The employee is occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl and to smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; risk of electrical shock and risk of radiation. The noise level in the work environment is usually moderate. Travel: This position requires extended periods of travel time, to and from job locations and areas where continuing education may be required. Inspectors are required to maintain cleanliness of personal vehicles at all times. Fuel expenses will be reimbursed. Benefits Career Advancement Opportunities Flexible Scheduling Great Work Environment Sick Time, PTO, and Health Benefits Plan AmeriSpec Inspection Services is an Equal Opportunity Employer Compensation: $20.00 - $24.00 per hour AmeriSpec offers the best training in the industry by combining classroom instruction, in-field inspections and hands-on technical training in our state-of-the-art facility, led by instructors with over 30 years of experience. A replica of a home, as well as a host of training aids such as a roof, water heater, plumbing, electrical panel and appliances are utilized during training. It is specifically designed for AmeriSpec business owners and inspectors and illustrates what to examine when performing a quality home inspection. Parts of the house are fully functional, such as the kitchen and indoor lighting. In addition, used water heaters, furnaces, and air conditioning units are brought into the classroom, giving inspectors the opportunity to examine these important home systems and components. This innovative facility includes a combustion safety simulator/residential pressure diagnostic tool. This provides AmeriSpec business owners and inspectors with the training needed to make them the best in the industry. Interested in a career with AmeriSpec? Please review our open positions using the filters above. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to AmeriSpec Corporate.

AMERISPEC INSPECTION SERVICES IS INTERESTED IN HIRING THE NEXT GREAT INSPECTORS IN EAST TEXAS & LOUISIANA! Do you have what it takes to be that person? AmeriSpec Inspection Services is looking to hire Full Time Professional Inspectors. About AmeriSpec: We are a family owned and locally operated company that provides quality inspection services for our clients here in East Texas and Louisiana. We are committed to providing our staff the training, knowledge, and tools needed to be successful in the field while providing the excellent service that our clients demand. Essential Duties and Responsibilities: include the following. This position independently completes home inspections and ancillary services from start to finish. Other duties may be assigned. * Attend annual regional AmeriSpec conferences * Experience in Remediation, Water Damage, Trades, and/or an allied craft a plus * Experience in writing protocols a plus * Valid Driver's License and clean driving record * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals * Willingness to maintain records and communicate with Marketing Manager and Office Manager about job tasks * Willingness to perform onsite educational seminars for real estate agents and other local professionals * Willingness to comply with the State of Texas and governing agencies for licenses held * Willingness to comply with the State of Louisiana Home Inspector Laws & Regulations and gain licensing in that state * Perform other related duties as assigned * Assist in marketing efforts as directed by a Marketing Representative * Possess good communication skills and good computer skills * Develop and maintain alliances with successful area real estate agents * Work closely with Owner and/or Senior Inspectors to learn the essentials of Commercial & Home Inspections along with Mold Assessments and Protocols * Independently perform home inspections from start to finish Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with little to no supervision. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's Degree or equivalent from four-year college or technical school; or six months to one year experience as an AmeriSpec Associate Inspector; Completion of state requirements by an approved TREC provider; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: * Must be TREC licensed and willing to be licensed in the State of Louisiana * Must comply with applicable state licensure requirements and continuing education * Must be willing to receive ongoing training and licensing for our ancillary services that we offer Other Skills and Abilities: * Good communication skills * Ability to work independently * Ability to learn new information * Ability to learn new skills * Relationship building * Time management * Organizational skills * Mentoring and coaching skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is also regularly required to talk and/or listen. The employee is frequently required to stand, to walk, and to reach with hands and arms. The employee is occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl and to smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; risk of electrical shock and risk of radiation. The noise level in the work environment is usually moderate. Travel: This position requires extended periods of travel time, to and from job locations and areas where continuing education may be required. Inspectors are required to maintain cleanliness of personal vehicles at all times. Fuel expenses will be reimbursed. Benefits * Career Advancement Opportunities * Flexible Scheduling * Great Work Environment * Sick Time, PTO, and Health Benefits Plan AmeriSpec Inspection Services is an Equal Opportunity Employer Compensation: $20.00 - $24.00 per hour

Audubon is currently seeking a QAQC Inspector to join our team in our Houston, TX Energy Corridor Office. PRIMARY RESPONSIBILITIES: Implementation of Audubon Construction Solutions Quality Management System and overall quality performance Manage the Quality Control and Assurance program for the project Assist the Project Managers to set up, monitor, and maintain the Quality Management System project execution tools. Assure proper Inspection Test Reports are implemented and fulfilled throughout duration for the project Liaise with Supervision to ascertain and integrate quality management techniques that would benefit the project. Assure compliance with Audubon Construction Solutions standards. Interface with Corporate Management for technical support in Mechanical, Civil, Coating, Electrical and Structural documentation and other quality related practices and applications Coordinates with Corporate Management for weld procedures and weld certifications and monitors weld program onsite Monitor surveillance trends, NCRs, and subsequently surveillance testing activities for the project. Communicate any non-conformance and defects that may impact requirements for design, safety assurance, construction, commissioning, maintenance, or operations Maintain Inspection Test Plan for project activities and disciplines Maintain the Audubon Stage-Gate Project Management Process. Remain abreast of Industry "State of the Art" project management tools and practices. Health, Safety, and Environmental Responsibilities: All employees are responsible for supporting Audubon Companies' Health, Safety, and Environmental (HSE) policies and procedures. This includes: Performing duties in a manner that protects personal and team health and safety Participating in required HSE training, meetings, and reporting activities Identifying and reporting hazards, near misses, and unsafe conditions Following safe work practices and complying with applicable regulatory requirements EXPERIENCE AND SKILL REQUIREMENTS: CWI (Certified Welding Inspector) required. Multi discipline experience in Quality Assurance and Quality Control 10+ years' experience in construction company or related environment including 5 years' management experience. Excellent speaking, writing, communication, and organizational skills; public speaking a plus. Prior technical writing and/or project leadership experience a plus. Computer literate and familiar with MS Office software; SharePoint experience a plus. Computer literate in BlueBeam and NavisWorks No Recruiters, please! Equal Opportunity Employer/Veterans/Disabled

Apave America offers an employee-centric company culture, competitive pay, and opportunities to build a rewarding career full of growth & advancement. The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifying compliance with industry regulations. Conduct Inspections and Assessments Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage. Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks). Ensure compliance with relevant codes and standards (e.g., API, ASME, ASTM, NFPA, and OSHA). Prepare Inspection Reports Document findings from inspections, including any defects or non-conformities. Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions. Maintain records for future reference and regulatory compliance. Risk Assessment and Analysis Identify potential risks and hazards based on inspection findings. Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity. Assess the remaining life of equipment and suggest maintenance schedules to prevent failures. Non-Destructive Testing (NDT) Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects. Interpret NDT results and provide recommendations based on the findings. Regulatory Compliance and Safety Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols. Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards. Stay current with changes in regulations and industry practices. Collaboration and Communication Work with engineers, maintenance teams, and management to develop inspection schedules and action plans. Provide technical advice and guidance on repair and maintenance strategies. Communicate with contractors and third-party vendors regarding inspection requirements and results. Monitoring and Continuous Improvement Track and monitor equipment performance over time and report any changes or declines in condition. Recommend or implement improvements in inspection processes, techniques, or technologies to enhance efficiency and safety. Certification and Training Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies. Ensure that work is done in a manner that complies with both company procedures and industry best practices. Quality Assurance Ensure that inspections are carried out according to established quality assurance standards and practices. Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: High School Diploma or equivalent is required. Minimum of two (2) years' experience working with the 510, 570, and/or 653 certifications required. Minimum of API 510 and 570 certifications are required. Additional API 653 certification will be considered an asset. Certifications in NDT methods (MT/PT/UTT) would be considered an asset. Valid Driver's License and pre-access drug and alcohol testing required. Pre-employment background checks will be required. Work Conditions: Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders Working in a plant and/or shop area around production machinery with extreme noise levels Work from various levels of heights and/or confined spaces for long periods of time Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: Ability to lift, move, and carry objects weighing 75lbs. or greater Must be able to walk, sit, stand, bend, reach, and climb Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping Working extended hours and standing for extended periods of time Work in indoor and outdoor environments in conditions of extreme heat and/or cold Work in and near industrial hazards Must be able to walk and climb except when performing non-field duties Remain consistently active throughout shift Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations Must be able to wear safety equipment as required by the safety department for personal protection (PPE) Ability to maintain focus and multitask effectively Exhibit sensible and responsible behavior Ability to work autonomously or within a team environment NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. *** Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. *** We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Day Schedule: 6 on / 3 off ( 12hr shifts).

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a Petroleum Inspector to join our Caleb Brett team, on site, at our Corpus Christi facility. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award-winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector, a valued member of our Inspection team, is responsible for performing an array of measurement testing of clients' commodities and cargo and reporting those test results to management. Shift/Schedule: Rotating Shifts and Hours, including nights, weekends, holidays, and on-call hours Salary & Benefits Information In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, barges, and ships. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges, and ships. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges, and ships. Perform routine equipment calibrations, verification, and function checks. Verify and communicate the results obtained and to make the entries into the appropriate media. Provide on the job assistance and receive training from more experienced inspectors. To communicate and coordinate with terminal, transport, and Company personnel to promote smooth exercise of duties assigned. To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. To perform routine equipment calibration, verification, and function checks. To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. To maintain work areas, records, and equipment in a clean, organized, and functional condition. To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Ability to work varying shifts , hours, and on-call basis. Cannot have a fear of heights. Ability to climb ladders and stairs for shore tanks. Experience with Verifying and communicating results obtained and to make the entries into the appropriate media *Valid driver's license and reliable driving record (required) Ability to acquire and maintain a Transportation Worker Identification Credential (TWIC). Always Model Intertek's 10X Energies within the workplace, practicing business the right way. Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Must be detailed oriented and able to effectively prioritize and organize workload with efficient time management. Ability to travel as business needs dictate. Physical requirements to include Lifting, walking, standing, reaching, bending, stooping, climbing, squatting, and driving. Preferred Requirements & Qualifications: Experience with Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, barges, and ships. Experience with Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges, and ships. Experience with Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges, and ships. Experience with Performing routine equipment calibrations, verification, and function checks. IFIA certified is a plus!