Quality inspector jobs in Lubbock, TX - 1,594 jobs

About the job QC inspector QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details

IRISNDT is currently seeking a NACE CIP Level 1 and Level 2 Inspectors for a full time, call out positions. The Coating Inspectors shall possess knowledge and skills relating to the application of protective coatings to pipelines, fabricated piping, and storage tanks. The inspector should be familiar with and have experience in applying protective coatings, operating lest equipment, monitoring the application of the coatings, and enforcing company, industry and manufacturers specifications. The inspector must be familiar with safety standards applicable to coating applications as set forth in OSHA Construction Industry Standards. Primary Functions: • Performs assigned routine tests on materials, services in process, or finished projects where results are compared with company quality standards. Reports results to supervisor who will make an analysis and take necessary action. • Inspects visually for obvious defects. • Performs detailed visual inspection when necessary to determine quality of prodcut/service where limits are not clearly defined. Identifies defective work and helps put corrective actions in place. • Records results on inspection forms or charts and reports number of defects found. Posts and maintains forms and charts of inspection data, quality levels, or special quality studies. • May act as quality control department clerk, maintaining all quality records for facility. • Verifies that all materials used in the performance of the job assignment are in compliance with Client Company requirements. • Cooperates and works closely with the Repair/Cut-Out Welding Inspector, NDT and Contractor's Representative to assure that no repairs or cutouts are coated and lowered-in. • Assures that all specifications and safety standards are adhered to. • Records and reports material usage and waste. Qualification & Skill Requirements: High School Diploma or equivalent is required Minimum of two (2) years of experience in the application or inspection of coating in the petroleum or chemical industries, or One (1) year experience in the application or inspection of coating and either NACE CIP level 1 certification or SSPC PC1 level 1 certification. Current NACE CIP Level 1 or Level 2 certification required API 510/570 certifications considered an asset Valid TWIC card required Valid Driver's License and pre-access drug and alcohol testing required Pre-employment background checks will be required Please note: API 1169 Certification is required for all Inspectors by January 1, 2019. Physical Requirements: Move, carry, and lift objects 50 lbs. or more. Must be able to walk, stand, bend, reach, and climb. Must be able to work indoors and outdoors in all weather conditions. Benefits: Dental Insurance. Vision Insurance. Health Insurance. Paid Time Off. 401(K) W/Matching. Flexible Spending Account. Health Savings Account. About IRISNDT: IRISNDT is a tech-enabled value-adding service provider of Non-destructive Testing (NDT), Advanced NDT, Inspection, Asset Integrity Engineering, Software, and Specialized Mechanical Services to the chemical and petrochemical, refining, renewables, power, mining and other diverse end markets in the USA, Canada, the United Kingdom, and Australia. Join IRISNDT to build a promising career. Our dynamic environment offers advanced technology and ongoing learning, placing you at the forefront of industry innovation. We prioritize a strong safety culture and invest in our team, promoting a family-friendly workplace and internal career advancement. With IRISNDT, elevate your career where progress and excellence converge. We boast a team of over 2,000 dedicated staff members worldwide, our growth has been driven by seasoned management, robust technical expertise, and an unwavering commitment to exceeding customer expectations. For more information, visit our website at **************** NOTE: To be considered, applicants must be able provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification.

Quality Lead - Entry Level 1st Shift Advance Services inc. is hiring Quality Lead for the northwest Houston "climate controlled" plant. This role involves working closely with Quality Management to help oversee the production floor, ensuring quality standards are met consistently, attention to detail is required as well as standing for up to 10 hours a day Shift is Monday to Friday and sometimes sat and sun. Weekends are required if scheduled with some overtime and weekend work as required unless otherwise previously approved to be off of work. Pay $14.00 per hour Key Responsibilities: Support quality assurance processes on the production floor Collaborate with leadership to maintain high standards of production Identify and help resolve quality-related issues Maintain accurate records and reports using basic computer tools Promote a culture of professionalism, respect, and integrity Basic Requirements: Leadership experience (preferred but not mandatory) Strong commitment and reliability Attention to detail Basic computer skills Respectful and professional demeanor Honesty and integrity Problem-solving abilities Ability to work flexible hours, including weekends and extended shifts (10-12 hours as needed) English proficiency Why work for Advance Services, Inc. We are your employment specialists Never a fee Weekly pay Safety and attendance incentives Health Benefits PTO Referral Incentives Apply for this job by clicking the apply button, applying our website and selecting a branch near you or calling our office at************** Please complete online application and Stop in and see our experienced friendly staff at 1530 W Sam Houston Pkwy, Houston, Tx 77043 to be considered for this immediate opportunity. Advance Services is an equal opportunity employer.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description AECOM's Disaster Recovery Division is seeking a knowledgeable Part-Time Variable Site Inspector to join our Houston team. In this role, you will support critical disaster recovery programs by performing post-storm site inspections, developing scopes of work and cost estimates, and collaborating with program leadership, contractors, and applicants to help communities recover efficiently and in compliance with program requirements. The responsibilities of this position include, but are not limited to: The Site Inspector will assist with the implementation of Disaster Recovery Programs, including the oversight of managers and distribution of resources within a specific functional area. The Site Inspector should maintain a complete understanding of all applicable Program policies and requirements. The Site Inspector will be responsible for the following: Work with senior leadership and the applicant to identify projects that comply with the established categories of work for the program. Understand all aspects of pre-construction processes including, but not limited to: inspections, estimated costs to repair (ECR), surveying, development of program compliant plans and specifications and any other construction documents required by the Program. Maintain a complete understanding of all applicable Program policies and requirements. Oversee the implementation of specific parts of the construction project, which may include oversight and distribution of resources within the specific functional area. Inspect and determine extent of damage to residential and/or commercial properties. Develop scopes of work and cost information/estimates for repair or replacement of disaster related residential or commercial property damage. Interact with General Contractors during disaster recovery residential repairs/construction. Maintain a complete understanding of local building codes and regulations. Prepares cost estimation packages and analysis of General Contractor estimates for housing projects. Perform duties with some complexity under general supervision. Expected to assist in the QA/QC of cost estimates assigned to other inspectors. Perform site inspections for post-storm residential damage. Create Estimated Cost of Repairs (ECR) and detailed cost estimating documentation. Conduct 50% and final progress inspections. Understand and apply local building codes, GLO design standards, and construction specifications. Complete required forms and obtain signatures in a timely manner. Qualifications Minimum Requirements * BA/BS and 4+ years of relevant or demonstrated equivalency of experience and/or education Preferred Qualifications Knowledge and functional experience with estimation services (Xactimate) Experience with estimating terminology, measures, concepts and principles. Advanced time management skills which utilize high-level strategies that aid staff in managing time, productivity, and effectiveness Xactimate Level 2 Certification 5+ years of disaster recovery construction experience preferred Experience with CDBG housing and/or FEMA hazard mitigation programs or similar programs/projects is preferred Advanced level Microsoft Office skills; ability to import, create formulas, pivot tables, export data and run reports in Microsoft Excel; ability to quickly learn new software applications Additional Information * Please note that sponsorship is not available for this position. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

Who We Are: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law.

We Are Artificial Lift. It's what we do. All day. Everyday. Flowco is redefining well “optimization” with the very latest in USA manufactured gas lift and plunger lift technologies and delivering unrivaled customer support wherever and whenever you need it. We are seeking a QUALITY ASSURANCE INSPECTOR (2nd Shift) to become an integral part of our team! This position is located in FORT WORTH, TEXAS. Job Summary : Preserve the quality standards of products by the inspection of incoming materials, in-process work, finished products, and recording the quality results Responsibilities may include, but are not limited to: Read blueprints and use inspection equipment Inspect, test, or measure materials or products being produced (primarily machined parts) Inspection and measuring equipment calibration duties (machine shop related equipment) Develop and conduct various inspections on inbound materials from suppliers and outbound internally made products (machined parts and assemblies) Ensure that the quality check procedure in place are followed during every manufacturing phase Create comprehensive documentation for quality issues and document the corrective actions that were taken Educate the manufacturing team on quality control issues and work with departmental supervisors to improve overall product quality Create process checklists and coordinate quality inspections with departmental supervisors Required : High School Diploma/GED Required : 2-year minimum QA experience Preferred : 5-year minimum QA experience Preferred : Valid & Current CWI certification (welding inspection) Preferred : Valid & Current CWI certification (welding inspection) Preferred : Oil & Gas product/material/manufacturing industry experience Preferred : Experience with component/assembly inspection Must be able to lift up to 75lbs Must be able to stand for 8+ hours per shift Must be able to read, give, and take direction in English Must be able to work full time and have great attendance Must pass drug screen & background check Must have excellent communication skills Must be detailed oriented, have basic math skills and computer skills Must have a courteous and positive attitude, also have a sense of urgency, drive, pride, and desire to succeed Will be working in a shop environment Well versed at analyzing information, reporting investigation results, and have solid documentation skills Performs tasks associated with the quality control inspection of various products while meeting productivity, quality, safety, behavioral, and attendance expectations Experience with inspecting parts made in a machine shop and the typical inspection equipment typically used to inspect machined parts. 3+ experience using CMM machine is a plus. NO RECRUITERS/HEADHUNTERS/STAFFING AGENCIES Unsolicited emails or calls will not be read or returned

POSITION: Welding Quality Control Inspector 1 or 2 SHIFT: 6:00 am - 4:30 pm, Monday - Thursday (OT Friday/Saturday as needed) PAY RATE: $21 - $26+ per hour (Depending On Experience) LOCATION: Lubbock, TX We are looking for committed, focused, detail-oriented individuals to join our quality control team as a Quality Control Inspector. This position is responsible for inspecting products to ensure they meet quality and contract specifications and meet external certification standards. If you are perceptive, care about quality, and have an acute concern for detail, apply today to be a Game Changer here at TrueNorth Steel. At TrueNorth Steel we value Safety, Integrity, Humility, Focus, Knowledge, Commitment, and Confidence. Since 1945, we have been delivering quality, trusted products to our customers. As an industry leader in quality manufactured and fabricated steel products, TrueNorth Steel puts safety at the forefront of our business, helping us achieve the quality we promise. TrueNorth Steel offers a comprehensive benefits package to full-time employees, which includes an excellent health/dental package, disability, life insurance, flexible spending account benefits, profit-sharing, 401(k) with company match, and paid time off. ESSENTIAL JOB FUNCTIONS Responsible for inspecting products to ensure they meet quality and contract specifications and meet external certification standards. Follow all company safety and quality requirements. Ensure that all materials and workmanship are completed in accordance with UL, STI, API, AWS, AISC, or City of LA standards, drawings and specifications, as applicable per site. Inspect materials and finished goods to ensure they meet customer requirements and/or contract specifications, including but not limited to checking welds, welding consumables, base material, cut & formed parts, layout work and coatings. Review welding specs and/or requirements for each project and work with team to solve fabrication challenges. Document and segregate non-conforming fabricated material and workmanship. Review and work with site management & shop supervisor to address remedies for non-conformances and their prevention. Ensure Welding Specification Procedures (WPS) are current and in place for projects, as applicable per site. Supervise and/or conduct Welder Qualification Test Reports (WQTR) to AWS (D1.1 and/or D1.5) and CWB standards, as applicable per site. Annual calibration of welding equipment, QC inspection equipment and pre-qualifications for bolt, as applicable per site. Remain current with AWS CWI and City of LA Supervisor &/or Inspector licenses, code analysis, industry standards, procedures and processes, as applicable per site. Understand, support and implement company Quality Management System. Work with Quality Assurance & Site Managers and Shop Supervisor to develop annual training programs for new and experienced employees to minimize product non-conformance. Represent the company, as needed, on field issues requiring investigation and decisions associated with product quality and conformance. Apply and work within appropriate controls related to Safety and Housekeeping. Operate overhead crane safely. Willing to work flexible hours and overtime or weekends as needed. Prompt and dependable attendance. Other duties as assigned. KNOWLEDGE, SKILLS AND QUALITIES Welding inspection training. Any applicable standards knowledge such as AWS, City of LA, API, UL, or STI. A thorough knowledge of contract documents and blueprint reading. Excellent math skills Leadership skills to motivate co-workers to quality workmanship. Ability to accept responsibility and account for his/her actions. Ability to perform work accurately and thoroughly. Ability to be truthful and be seen as credible in the workplace. Ability to make decisions or take actions to solve a problem or reach a goal. Be dependable and trustworthy. Embrace and demonstrate the qualities of the TrueNorth Steel Game Changer definition. EDUCATION AND WORK EXPERIENCE Minimum of five years welding experience, or equivalent training in manufacturing/structural steel. AWS Certified Weld Inspector or Associate Inspector is preferred.

Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. Review and interpret project drawings, specifications, and quality requirements. Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. Verify materials and workmanship meet the project's approved submittals and standards. Attend quality and coordination meetings as needed. Ensure that all inspection and testing records are properly documented and archived. Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). Familiarity with construction materials and laboratory/field testing procedures. Strong organizational and communication skills. Proficiency with Microsoft Office Suite and QA/QC reporting tools. Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): ACI Concrete Field Testing Technician - Grade I NICET Certification in Civil/Construction Inspection OSHA 10 or 30 Certification ISO 9001 Quality Management Systems knowledge QMS/QA-related training or certifications Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions. Xylem is seeking a Quality Inspector responsible for performing inspections on incoming materials, parts, and assemblies to ensure compliance with engineering drawings, specifications, and quality standards. This role plays a key part in maintaining product integrity and supporting continuous improvement within our manufacturing operations. Essential Duties and Responsibilities Inspect incoming materials and finished assemblies for compliance with standards, drawings, and purchase order requirements. Document inspection results through receiving and final inspection reports. Generate Product Inspection Reports (PIRs) for all non-conforming materials. Collaborate with Quality Engineering to identify root causes and assist in implementing corrective actions. Perform additional quality-related tasks as assigned. Availability to work Monday through Saturday as needed. Minimum Qualifications High school diploma or GED required. Minimum of 2 years of experience in dimensional inspection. Ability to read and interpret engineering drawings. Proficient in the use of standard inspection tools and measuring equipment. Strong attention to detail and effective communication skills. Preferred Qualifications Experience in a pump fabrication or machine shop environment. Basic computer skills and familiarity with ISO 9000 quality standards. Physical Demands Ability to stand or sit for 8+ hours per shift. Frequent reaching, walking, pushing, pulling, and lifting. Must be able to lift and handle parts up to 35 lbs.; heavier items will be lifted using a hoist. Work Environment Typical manufacturing shop environment with seasonal temperature changes. Exposure to noise-ear protection required. Work around electrical components, motors, and wiring. Required PPE includes: safety glasses, ear plugs, safety shoes (with toe and metatarsal guards), gloves, and work uniform. Join the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world. At Xylem, you'll not only contribute to solving water issues but also have the chance to make a difference through our paid Volunteer Program, Xylem Watermark. We prioritize our employees' well-being through inclusion and belonging as well as our Employee Resource Groups (ERG). Proud to be an Equal Employment Opportunity (including disability and veterans) and Affirmative Action workplace, Xylem fosters an inclusive environment free from discrimination or harassment. Please note that the information in this outlines the general nature of the position and is not an exhaustive list of duties. Xylem is dedicated to providing reasonable accommodations to enable all employees to perform their essential job functions. We reserve the right to modify this job description and assign additional duties as needed. Embrace the opportunity to be part of Xylem's transformative journey in shaping the future of water technology! #XylemCareers #GlobalImpact #WaterInnovation

Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Electrical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Electrical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Understand the project scope and requirements. Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines. Review and verify material submittals for A/E and Client approval. Confirm delivered materials match approved submittals. Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly. Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion. Conduct internal quality audits and site inspections. Adhere to Quality, Health, Safety, & Environment (HSE) standards. Provide technical support to address operational challenges and client concerns. Plan and inspect Definable Features of Work (DFWs). Develop and implement Audit and Test Plans for quality inspections and testing. Maintain and update quality manuals, checklists, and forms. Collaborate with third-party QA/QC firms as needed. Participate in Quality Management System (QMS) audits. Build relationships with project partners, consulting engineering firms, public agencies, and clients. Ensure document control compliance and maintain project submittal logs and quality control reports. Verify and document material compliance with approved submittals. Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties. Investigate and address non-conformance issues promptly. Ensure calibration of inspection, measurement, and test equipment. Liaise with the General Contractor, Client, and Project Management team to resolve quality issues. Prepare presentations on progress, findings, and recommendations for management. Review subcontractors' submittals for compliance. Coordinate and monitor subcontractors, suppliers, direct labor, and materials. Collaborate with public utility suppliers for final service connections. Coordinate activities of inspection agencies. Achieve required MEPS and electromechanical inspections. Assist in preparing periodic QA/inspection progress reports. Review and approve subcontractor work percentages. Oversee commissioning processes. Manage the MEP project closeout to ensure all requirements are met. QUALIFICATIONS Required Qualifications: 15+ years of construction and quality management experience. Bachelor's degree in mechanical, electrical engineering, or a related field. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions. Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects. Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis. Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded. Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor. Technical knowledge of materials and construction concepts. Experience working as an Electrical QA/QC Supervisor for large commercial, industrial, or mission-critical facilities construction projects. An excellent understanding of construction Quality Management Systems (QMS). Familiarity with punch list procedures and project closeout processes. Strong attention to detail and excellent analytical skills. Strong knowledge of high, medium, and low-voltage systems, HVAC, control systems, commissioning, LEED/Green building projects, and general ground-up construction projects as applicable to MEPS. Preferred Qualifications: Project Management Professional (PMP) certification. Construction Quality Manager Certification (CCQM) US Army Corps of Engineers (USACE) Certified Quality Auditor (CQA) Member of the American Society for Quality Six Sigma Certifications ISO 9001 Green Business Certification (LEED) Strong background in data center development and construction POSITION DETAILS: Primary Location (On-site): Lubbock, Texas Position: Electrical QA Inspector Position Classification: Salary-based full-time hours Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: Microsoft Office Microsoft 365 CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. Day Schedule: 6 on / 3 off ( 12hr shifts).

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Job Description Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR uQPpr80lyK

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Mechanical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Mechanical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Understand the project scope and requirements. Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines. Review and verify material submittals for A/E and Client approval. Confirm delivered materials match approved submittals. Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly. Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion. Conduct internal quality audits and site inspections. Adhere to Quality, Health, Safety, & Environment (HSE) standards. Provide technical support to address operational challenges and client concerns. Plan and inspect Definable Features of Work (DFWs). Develop and implement Audit and Test Plans for quality inspections and testing. Maintain and update Quality manuals, checklists, and forms. Collaborate with third-party QA/QC firms as needed. Participate in Quality Management System (QMS) audits. Build relationships with project partners, consulting engineering firms, public agencies, and clients. Ensure document control compliance and maintain project submittal logs and quality control reports. Verify and document material compliance with approved submittals. Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties. Investigate and address non-conformance issues promptly. Ensure calibration of inspection, measurement, and test equipment. Liaise with the General Contractor, Client, and Project Management team to resolve quality issues. Prepare presentations on progress, findings, and recommendations for management. Review subcontractors' submittals for compliance. Coordinate and monitor subcontractors, suppliers, direct labor, and materials. Collaborate with public utility suppliers for final service connections. Coordinate activities of inspection agencies. Achieve required MEPS and electromechanical inspections. Assist in preparing periodic QA/inspection progress reports. Review and approve subcontractor work percentages. Oversee commissioning processes. Manage the MEP project closeout to ensure all requirements are met. QUALIFICATIONS Required Qualifications: 15+ years of construction and quality management experience. Bachelor's degree in mechanical, electrical engineering, or a related field. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions. Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects. Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis. Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded. Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor. Technical knowledge of materials and construction concepts. Experience working as a Mechanical Quality Supervisor for large commercial, industrial, or mission-critical facilities construction projects. An excellent understanding of construction Quality Management Systems (QMS). Familiarity with punch list procedures and project closeout processes. Strong attention to detail and excellent analytical skills. Strong knowledge of high, medium, and low-voltage systems, HVAC, control systems, commissioning, LEED/Green building projects, and general ground-up construction projects as applicable to MEPS. Preferred Qualifications: Project Management Professional (PMP) certification. Construction Quality Manager Certification (CCQM) US Army Corps of Engineers (USACE) Certified Quality Auditor (CQA) Member of the American Society for Quality Six Sigma Certifications ISO 9001 Green Business Certification (LEED) Strong background in data center development and construction POSITION DETAILS: Primary Location (on-site): Abernathy, Texas Position: Mechanical QA Inspector Position Classification: Salary-based full-time hours Travel: 10% travel expected Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: Microsoft Office Microsoft 365 CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

AMERISPEC INSPECTION SERVICES IS INTERESTED IN HIRING THE NEXT GREAT INSPECTORS IN EAST TEXAS & LOUISIANA! Do you have what it takes to be that person? AmeriSpec Inspection Services is looking to hire Full Time Professional Inspectors. About AmeriSpec: We are a family owned and locally operated company that provides quality inspection services for our clients here in East Texas and Louisiana. We are committed to providing our staff the training, knowledge, and tools needed to be successful in the field while providing the excellent service that our clients demand. Essential Duties and Responsibilities: include the following. This position independently completes home inspections and ancillary services from start to finish. Other duties may be assigned. Attend annual regional AmeriSpec conferences Experience in Remediation, Water Damage, Trades, and/or an allied craft a plus Experience in writing protocols a plus Valid Driver's License and clean driving record Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Willingness to maintain records and communicate with Marketing Manager and Office Manager about job tasks Willingness to perform onsite educational seminars for real estate agents and other local professionals Willingness to comply with the State of Texas and governing agencies for licenses held Willingness to comply with the State of Louisiana Home Inspector Laws & Regulations and gain licensing in that state Perform other related duties as assigned Assist in marketing efforts as directed by a Marketing Representative Possess good communication skills and good computer skills Develop and maintain alliances with successful area real estate agents Work closely with Owner and/or Senior Inspectors to learn the essentials of Commercial & Home Inspections along with Mold Assessments and Protocols Independently perform home inspections from start to finish Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with little to no supervision. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's Degree or equivalent from four-year college or technical school; or six months to one year experience as an AmeriSpec Associate Inspector; Completion of state requirements by an approved TREC provider; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: Must be TREC licensed and willing to be licensed in the State of Louisiana Must comply with applicable state licensure requirements and continuing education Must be willing to receive ongoing training and licensing for our ancillary services that we offer Other Skills and Abilities: Good communication skills Ability to work independently Ability to learn new information Ability to learn new skills Relationship building Time management Organizational skills Mentoring and coaching skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is also regularly required to talk and/or listen. The employee is frequently required to stand, to walk, and to reach with hands and arms. The employee is occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl and to smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; risk of electrical shock and risk of radiation. The noise level in the work environment is usually moderate. Travel: This position requires extended periods of travel time, to and from job locations and areas where continuing education may be required. Inspectors are required to maintain cleanliness of personal vehicles at all times. Fuel expenses will be reimbursed. Benefits Career Advancement Opportunities Flexible Scheduling Great Work Environment Sick Time, PTO, and Health Benefits Plan AmeriSpec Inspection Services is an Equal Opportunity Employer Compensation: $20.00 - $24.00 per hour AmeriSpec offers the best training in the industry by combining classroom instruction, in-field inspections and hands-on technical training in our state-of-the-art facility, led by instructors with over 30 years of experience. A replica of a home, as well as a host of training aids such as a roof, water heater, plumbing, electrical panel and appliances are utilized during training. It is specifically designed for AmeriSpec business owners and inspectors and illustrates what to examine when performing a quality home inspection. Parts of the house are fully functional, such as the kitchen and indoor lighting. In addition, used water heaters, furnaces, and air conditioning units are brought into the classroom, giving inspectors the opportunity to examine these important home systems and components. This innovative facility includes a combustion safety simulator/residential pressure diagnostic tool. This provides AmeriSpec business owners and inspectors with the training needed to make them the best in the industry. Interested in a career with AmeriSpec? Please review our open positions using the filters above. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to AmeriSpec Corporate.

Select Milk Producers is one of the nation's largest and most progressive dairy cooperatives, with 32 wholly owned subsidiaries, 8 processing plants, and 8 joint ventures including Continental Dairy Facilities, Continental Dairy Facilities Southwest, Mill Haven Foods, Select Custom Solutions, GreenLink and Select Services. With over 800 employees, the Select Milk family of companies impacts all aspects of the dairy farm business and at the heart of our family of companies, is you. "We strive to go above and beyond what's expected in providing for our families, leading our employees, caring for our land and animals, serving our customers, producing quality milk, and serving one another. This commitment is more than our business, it's in our culture and our character. We believe in being accountable, in doing what's right, in performing at our best, in setting a higher standard." Select Milk Producers and its subsidiaries offer an attractive compensation and a best-in-class benefits package that includes but is not limited medical, vision, dental, life insurance and more that can be tailored for you and your family. Other benefits for eligible employees include 401(k) up to 6% company match, life and disability insurance, and paid holidays & vacation. We are proud to promote an equal employment opportunity workplace. SUMMARY OF FUNCTIONS: The Quality Assurance Technician is responsible for analytical and microbiological evaluations of all raw, pasteurized, and final products. All work must comply with USDA, FDA, AOAC, GFSI, GMP, and safety regulations, as well as company policies. A Technician I performs routine testing and QA tasks under close supervision, focusing on building technical proficiency and knowledge. DUTIES AND RESPONSIBILITIES: • Operate laboratory testing equipment and independently perform a broad range of analytical and microbiological tests • Perform daily quality checks and audits under close supervision. • Accurately complete worksheets and logs, either electronic or paper. • Assist in the preparation of solutions, media, and sample compositing for third-party testing. • Follow all safety, GMP, and laboratory protocols. • Maintain cleanliness and organization of the laboratory work area. • Escalate unusual results or product defects immediately to a supervisor. • Participate in basic training and continuous improvement activities. • Perform other duties as assigned by management. KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Must work in a safe, efficient manner and follow all safety procedures including the use of safety equipment. • Must have the ability to troubleshoot small problems and be able to discern when issues may require input from levels of authority within the corporation. Must be willing to ask for assistance when the process is unclear. • Developing knowledge of laboratory practices. Works under close supervision. Seeks guidance when issues arise. EDUCATION AND/OR EXPERIENCE: • Tech I: Bachelor's degree preferred (or equivalent coursework) in Dairy Science, Microbiology, Food Science, Chemistry, or related field or similar work experience in related industry. CERTIFICATES, LICENSES, REGISTRATIONS: • All levels must be able to acquire a Certified Sampler license by the state regulatory agency. • All levels must be able to obtain certification as Certified Industry Supervisor in accordance with the Pasteurized Milk Ordinance (PMO) and state regulatory requirements. Tech I: Expected to obtain certifications within specified timeframe.

Audubon is currently seeking a QAQC Inspector to join our team in our Houston, TX Energy Corridor Office. PRIMARY RESPONSIBILITIES: Implementation of Audubon Construction Solutions Quality Management System and overall quality performance Manage the Quality Control and Assurance program for the project Assist the Project Managers to set up, monitor, and maintain the Quality Management System project execution tools. Assure proper Inspection Test Reports are implemented and fulfilled throughout duration for the project Liaise with Supervision to ascertain and integrate quality management techniques that would benefit the project. Assure compliance with Audubon Construction Solutions standards. Interface with Corporate Management for technical support in Mechanical, Civil, Coating, Electrical and Structural documentation and other quality related practices and applications Coordinates with Corporate Management for weld procedures and weld certifications and monitors weld program onsite Monitor surveillance trends, NCRs, and subsequently surveillance testing activities for the project. Communicate any non-conformance and defects that may impact requirements for design, safety assurance, construction, commissioning, maintenance, or operations Maintain Inspection Test Plan for project activities and disciplines Maintain the Audubon Stage-Gate Project Management Process. Remain abreast of Industry "State of the Art" project management tools and practices. Health, Safety, and Environmental Responsibilities: All employees are responsible for supporting Audubon Companies' Health, Safety, and Environmental (HSE) policies and procedures. This includes: Performing duties in a manner that protects personal and team health and safety Participating in required HSE training, meetings, and reporting activities Identifying and reporting hazards, near misses, and unsafe conditions Following safe work practices and complying with applicable regulatory requirements EXPERIENCE AND SKILL REQUIREMENTS: CWI (Certified Welding Inspector) required. Multi discipline experience in Quality Assurance and Quality Control 10+ years' experience in construction company or related environment including 5 years' management experience. Excellent speaking, writing, communication, and organizational skills; public speaking a plus. Prior technical writing and/or project leadership experience a plus. Computer literate and familiar with MS Office software; SharePoint experience a plus. Computer literate in BlueBeam and NavisWorks No Recruiters, please! Equal Opportunity Employer/Veterans/Disabled

Apave America offers an employee-centric company culture, competitive pay, and opportunities to build a rewarding career full of growth & advancement. The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifying compliance with industry regulations. Conduct Inspections and Assessments Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage. Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks). Ensure compliance with relevant codes and standards (e.g., API, ASME, ASTM, NFPA, and OSHA). Prepare Inspection Reports Document findings from inspections, including any defects or non-conformities. Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions. Maintain records for future reference and regulatory compliance. Risk Assessment and Analysis Identify potential risks and hazards based on inspection findings. Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity. Assess the remaining life of equipment and suggest maintenance schedules to prevent failures. Non-Destructive Testing (NDT) Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects. Interpret NDT results and provide recommendations based on the findings. Regulatory Compliance and Safety Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols. Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards. Stay current with changes in regulations and industry practices. Collaboration and Communication Work with engineers, maintenance teams, and management to develop inspection schedules and action plans. Provide technical advice and guidance on repair and maintenance strategies. Communicate with contractors and third-party vendors regarding inspection requirements and results. Monitoring and Continuous Improvement Track and monitor equipment performance over time and report any changes or declines in condition. Recommend or implement improvements in inspection processes, techniques, or technologies to enhance efficiency and safety. Certification and Training Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies. Ensure that work is done in a manner that complies with both company procedures and industry best practices. Quality Assurance Ensure that inspections are carried out according to established quality assurance standards and practices. Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: High School Diploma or equivalent is required. Minimum of two (2) years' experience working with the 510, 570, and/or 653 certifications required. Minimum of API 510 and 570 certifications are required. Additional API 653 certification will be considered an asset. Certifications in NDT methods (MT/PT/UTT) would be considered an asset. Valid Driver's License and pre-access drug and alcohol testing required. Pre-employment background checks will be required. Work Conditions: Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders Working in a plant and/or shop area around production machinery with extreme noise levels Work from various levels of heights and/or confined spaces for long periods of time Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: Ability to lift, move, and carry objects weighing 75lbs. or greater Must be able to walk, sit, stand, bend, reach, and climb Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping Working extended hours and standing for extended periods of time Work in indoor and outdoor environments in conditions of extreme heat and/or cold Work in and near industrial hazards Must be able to walk and climb except when performing non-field duties Remain consistently active throughout shift Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations Must be able to wear safety equipment as required by the safety department for personal protection (PPE) Ability to maintain focus and multitask effectively Exhibit sensible and responsible behavior Ability to work autonomously or within a team environment NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. *** Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. *** We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.