Quality inspector jobs in Reading, PA

Quality Inspector - Reading, PA Hours 10:30pm - 7:00am Monday evening through Saturday Morning This position performs quality functions for injection molding, light assembly, and warehouse operations. The Quality Inspector ensures product conformity to established requirements by evaluating product drawings, specifications and related documents. Activities include conducting receiving, in-process, and final product inspections, and documenting results in various reports/logs in the Quality System. This position may also interface with customers, suppliers and /or regulatory agencies as appropriate. Employee may perform other related duties as required to meet the ongoing needs of the organization. Essential Responsibilities: Conduct inspections at First Article, set-up approvals, in-process, in-coming and complete the final inspections in accordance with applicable Engineering criteria, documents, drawings and workmanship standards. Input and perform trending of key inspection process metrics Document and report inspection findings and results, also monitor corrective actions to inspection findings. Communicate findings and coordinate activities with production, tooling, and shipping/receiving staff. Perform inspections using Precision Measurement equipment/devices. Perform functional testing of assemble units. Ensure proper operation of measurement equipment by following operating instructions. Read and interpret specifications and part drawings. Perform product identification and traceability activities, as required. Assist Engineering and Operations in the investigation of non-conformities. Assist in training production staff in quality assurance techniques. Ability to work with minimal supervision. Maintain a safe and clean work environment by following guidelines, procedures, and comply with all applicable regulations. Work effectively in a team setting. Perform other miscellaneous duties as assigned. Essential Skills: High school diploma or general education degree (GED); and one (1) year related experience and/or training; or equivalent combination of education and experience. Associates or Bachelor's degree in technical discipline preferred. Extensive knowledge of common inspection measuring equipment including, surface plates, micrometers, calipers, height gauges, radius gages, bore gauges, and dial indictors. Good manual dexterity and adept in use of precision measuring tools. Awareness of ISO9001, TS16949 & ISO13485 Quality management systems. Working knowledge of Lean Manufacturing Practices, Metrics and Reporting. Working knowledge of Statistical Techniques. Working knowledge of Good Manufacturing Practices (GMP's). Proficient in Microsoft Office suite of tools, Specifically Word, Excel, Power Point. ASQ Certification Preferred Ability to read and accurately interpret documents written in English such as safety rules, operating and maintenance instructions, drawings, measuring instruments, work instruction, bills of material and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before management or employees of organization. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Brentwood offers professional growth potential, pleasant work environment, and an excellent wage and benefits package including 401K w/employer match E.O.E. At Brentwood, we have a passion for both our products and our people. Our goal as an employer is to help you excel as an individual and as part of a team by providing you with a satisfying, motivating and stimulating work experience. The varied nature of the environment at Brentwood allows you to work alongside industry professionals on a wide range of projects, contributing your knowledge and strengths to develop innovative, market-driven solutions. To begin the application process, please complete all required fields below and click “Apply” to continue.

Electronics Inspector - Macungie, PA HTSS is hiring an experienced Inspector for a premier electronics manufacturer in the Macungie area. This is a solid temp-to-hire position offering great potential for long-term employment. Key Information Location: Macungie, PA Schedule: Monday-Friday, 7:30AM - 4PM Pay Rate: $20-$22/hour Type: Temp-to-Hire The Role: Quality Assurance You'll be crucial to maintaining quality standards by inspecting printed circuit board assemblies and other components. Key tasks include: Operating advanced inspection equipment (e.g., Mirtec AOI, Phoenix X-ray). Conducting first article, in-process, and final inspections against IPC standards. Maintaining accurate documentation and ensuring quality system compliance. Requirements & Qualifications Mandatory: Previous quality control or inspection experience. Skills: Detail-oriented, self-motivated, and able to interpret engineering documents. Preferred: Experience in electronics manufacturing, familiarity with IPC-A-610, and comfort with computer-based equipment. Don't wait-this opportunity won't last! Text the word "Inspector" to ************ to apply today!

Experienced quality technicians needed on 1st shift. Must have experience and know how to read blueprints. Great starting pay!

Do you want to work for a construction company unlike any other? At JGM, we challenge the industry's status quo. Known as the team that delivers “When You Need It Yesterday”, we've built a culture around safety, quality, and speed. At JGM, we're more than a company-we're a family. Working side by side, we support one another, building trust by knowing we can count on each other. Driven by our core values, mission, and purpose, we stay focused on our vision for the future. The result? A team environment that fuels exceptional employee satisfaction, which in turn drives extraordinary client experience and continued company growth. The only question is: Are you ready to join our growing family and be part of something truly special? Be an integral part of the JGM family by living our core values: We Plan. We Adapt. We Succeed. Uncompromising Safety & Quality. Family is Our Foundation. Create Value Through Better Solutions. Whatever it Takes. Commitment to Self-improvement. Our Purpose (FOREVER): Develop Elite Leaders Today, So We Can Build Tomorrow's Future Our Vision (ONE DAY): Driven to be the Safest, Fastest, and Most Effective Industrial Construction & Fabrication Partner in North America Our Mission (TODAY): Solve Our Clients Toughest Challenges with Safety and Quality Top of Mind Position Overview JGM is seeking a talented QC Inspector to join our growing team! The perfect candidate is a professional who thrives on tackling challenges in an exciting, fast-paced environment. This position will inspect raw materials, in-process work and finished products for conformance to shop drawings, specifications, and codes by performing the below duties. Responsibilities Conduct complete layout inspections, measuring dimensions (length, height, angles, radii, etc.) using precision instruments (micrometers, calipers, gauges, etc.) to ensure compliance with drawings, specifications, and codes. Verify quality at all stages: incoming materials, in-process work, and final products. Visually inspect parts, welds, bolts, coatings, and assemblies; compare pieces to detect variations; enforce standards and legal requirements. Interpret and apply shop drawings, specifications, ASTM codes, AISC standards, DOT requirements, and welding/bolting/painting codes. Maintain accurate inspection records, defect lists, and calibration of measuring equipment; coordinate with departments to resolve quality issues. Support operator training on measurement, visual acceptability, and processes; assist with internal and external audits. Manage NDE (Non-Destructive Examination) training, testing, certification, and documentation; maintain CWI certification. Review and approve quality-related purchase orders, reports, and testing requirements. Assist in developing procedures, quality summaries, and corrective actions; enforce non-conformance protocols. Serve as liaison with outside inspectors; investigate shop/field errors and support resolutions. Perform other QA-related tasks as required by supervision. Qualifications Strong knowledge of welding symbols and diagrams, and inspection tools. Highly proficient in reading blueprints and other printed instructional material. Basic Math & Geometry/Trigonometry. Familiar with variety of weld processes: Flux Core Arc Welding (FCAW), Sub Arc Welding (SAW), Gas Metal Arc Welding (GMAW), and/or Gas Tungsten Arc Welding (GTAW) Ability to perform and document inspection activities during fabrication and welding of structural piece members. Microsoft Office. CWI preferred. Self-motivated, collaborative team member. Safety focused. Operates equipment and champions safety initiatives. Education High School Degree or GED Equivalent preferred Minimum of seven years related experience and/or training in steel fabrication; or an equivalent combination of higher education and experience in the steel fabrication industry or closely related fields. Physical Requirements The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requires prolonged walking, standing, sitting, bending, squatting, stooping, climbing, regular lifting and carrying to move up to 50 lbs., talking, hearing, reaching, feeling, grasping, and push/pulling. Must be able to work in various weather conditions/temperatures. Regular mental and visual attention much or all the time with manual coordination. General office environment conditions. Flexibility required to travel. JGM offers a competitive wage and benefit package: Medical, Vision & Dental PTO & Holidays 401(k) + Matching Life Insurance Short/Long Disability Employee Assistance Program Generous Referral Program Training and Further Education This job description is subject to change based on the needs of the business and is not all-inclusive. JGM is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

(2nd Shift - With Occasional 3rd-Shift Coverage): • Maintains the quality control of our product through all stages of the manufacturing process. • Conducts routine inspections and provides support to operators in need of quality assurance while performing daily job duties & customer orders. • Performs daily product inspections in all departments of the manufacturing facility. • Performs daily work area inspections and completes the Quality Dept. Inspection. • Conducts routine services to all units involved in the chemical analysis of the material. • Verifies the daily set up of the eddy current machines. • Maintains customer orders by testing finished product samples. • Works with manufacturing to ensure quality of product and standards. • Performs all other duties and special projects as assigned. Position Qualifications & Requirements: Education: • High School Diploma or GED Experience: • Minimum of 1 year experience in manufacturing plant preferred. Skills and Abilities: • Must train and qualify to use micrometers & calipers. • Must train and qualify on all of the following: o Grain size analysis o Tensile, Yield and Elongation Testing o Rockwell Hardness Testing o Cleanness Testing of LWC o Micrometer Dimensional Inspection o Dimensional Inspection - AutoCAD Microscope o Visual Inspections of each work station including measurements o Spectrometer Analysis + Calibration + Service o Gas Analyzer Analysis + Calibration + Service o Burst/Pressure Testing o Eddy Current Testing including set up and troubleshooting o Cut and prepare test samples o Must be familiar with power tools: table saw, band saws, polishing wheels, & lathes • Must gain knowledge of ISO 9001 - current standard. • Computer programs: SAP, Microsoft Office, Access, SQL, Excel & Word. • Must gain knowledge of Copper Tube production process: casting, drawing, finishing, annealing. • Must gain knowledge of product testing: grain size analysis, microscope, chemical analysis, tensile testing, Rockwell hardness testing, Eddy Current Testing, Dimensional Measuring, Oxygen & Hydrogen Gas Analysis, Cleanness testing. • Must gain knowledge of Equipment Calibrations and data basing. • Must be willing to work weekends when required. Overtime is required. • This position is assigned to 2nd shift and may be required to cover 3rd shift as needed. Supervisory Responsibilities: • None. Physical Demands and Work Environment: • Fast-paced working environment, extremely hot at times; must always wear hearing, eye, & foot protection. Position is inside a manufacturing facility with a casting & annealing furnace, heavy machinery, cranes, & forklifts. • Must be able to walk extensively during the workday and stand for extended periods of time. • Must be able to wear required Personal Protective Equipment (PPE) for extended periods. • Computer work. Travel: • None.

Quality Control Inspector Opportunity - Macungie, PA HTSS is seeking a highly meticulous Quality Control Inspector to join a respected electronics manufacturer in the Macungie area. This role is essential for ensuring the quality and reliability of electro-mechanical and printed circuit board PCB assemblies, offering a strong Temp-to-Hire path. Compensation and Schedule Location: Macungie, PA Schedule: Monday-Friday, 7:30AM - 4PM Pay Rate: $19/hour Type: Temp-to-Hire Core Responsibilities As the QC Inspector, you will act as the final check on product quality: Inspection: Inspect components and assemblies, verifying dimensions using precision measuring tools (e.g., calipers, micrometers). Testing: Conduct functional tests on final assemblies according to established procedures, utilizing test equipment. Documentation: Accurately document all inspection results, track defects, and maintain quality records. Quality Assurance: Collaborate with production to resolve quality issues, suggest corrective actions, and ensure adherence to all quality system processes. Support: Assist with inventory processes, ERP data scanning, and participate in rework/repair of defective assemblies, which may include light soldering. Candidate Profile and Requirements We are seeking a detail-focused professional prepared for a fast-paced environment: Required Experience: Previous experience in a Quality Control or similar inspection role is mandatory. Visual Acuity: Strong attention to detail and excellent visual acuity, including accurate color identification. Technical Skills: Able to read and interpret blueprints, schematics, and technical drawings. Proficient with measuring instruments and Microsoft Office (Word, Excel). Physical: Comfortable sitting or standing throughout the shift and lifting up to 30lbs. Preferred: Prior experience in electronics manufacturing, familiarity with IPC-A-610 standards, and soldering experience are a definite plus. Apply Today If you are ready to apply your inspection expertise to a rewarding role, we want to hear from you. Text "QC Inspector" to ************ to apply!

Job Posting Title Quality Inspector - 1st & 2nd shift Electron Energy Corporation (EEC) is a world leader in the design and manufacturing of rare earth magnets for demanding applications in aerospace, defense, medical, and industrial markets. As part of Permag, EEC leverages deep materials expertise and vertically integrated capabilities to deliver high-performance magnetic solutions. For more information on Electron Energy Corporation, please visit: ****************************** Job Description : Inspector level 1 is primarily responsible for magnetizing parts, stabilization, and magnetic inspections using Helmholtz coils and gauss probes. Essential Duties & Responsibilities: Required operations: Magnetization Magnetic inspection Helmholtz coil Gauss probe (operates) LVFS (operates) Visual inspection Microscope Part marking Manual marking Laser marking Mark inspection Other responsibilities: Ensure proper polarity per part print Stabilize material post saturation Record sample data per magnetic inspection. Process 100% inspection when applicable Record information on routers Epicor transactions Basic blueprint reading Desired additional operations: Magnetic inspection LVFS (set up) Styker magnetic inspection robot M-Axis plotter (operating) Rotor plotter (operating) Magnetize Large magnetizer Magnetic adjusting High volume auto magnetizer Mechanical inspection Level 2 inspector tools Intermediate blueprint reading Compiling customer documentation Generates NCMR paperwork. Qualifications: High school diploma or equivalent. Minimum of 1 year manufacturing experience. Successful Essential Behaviors: Sense of urgency and ability to work at a quick pace. Attention to detail with a focus on accuracy, completeness, and compliance with standards and regulations. Collaborative team player. Upholds organizational values and demonstrates integrity in all aspects of work. Possesses a positive attitude with a willingness to learn. Demonstrates a proactive and positive attitude toward achieving goals. Work Environment and Physical Demands: Works in a manufacturing environment with exposure to machinery and occasional noise. Requires standing, stooping, bending, sitting, and lifting to 40 lbs. Manual dexterity and visual acuity required for detailed work. Ability to understand verbal instructions and comply with safety and quality regulations.

At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life for our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. As with all s at R-V, this job is considered safety-sensitive. GENERAL JOB DESCRIPTION We are seeking an experienced Quality Inspector to join our team at our Honey Brook and Morgantown, PA locations. This position is responsible for providing day-to-day quality engineering support within our General Fabrication, ASME Section VIII, and NQA-1 markets. This position will play an integral role in the growth and improvement of the RVII organization through elevating first pass quality, increased project throughput, on-time delivery, and project expectations. DUTIES/RESPONSIBILITES Provide technical support to RVII manufacturing facilities Supports gathering and presenting key KPI measurements to the organization Participate in pre-job contract review. Develop and implement inspection and test plans for manufactured and purchased components Interface with vendors to ensure timely resolution of Quality non-conformances Conduct internal quality system process audits Coordinate and host outside inspection agencies and customer inspectors Prepare, revise, and implant Quality System procedures, policies, and work instructions Conceptualize and analyze designs to ensure technical outcomes are consistent with customer and company specifications Perform non-destructive and dimensional inspections in accordance with approved procedures, customer specifications, and governing codes. Maintain control and maintain an inventory of non-conforming products. Review contracts to determine deliverables and ensure compliance with specifications Plan, schedule, and coordinate NDE Inspection activities daily in conjunction with the manufacturing department. Maintain adherence with all M&TE requirements, testing requirements, and procedures SKILLS/QUALIFICATIONS NDE (Non-Destructive Evaluation) qualifications - minimum of Level II in VT/MT/PT/BLT/UT-T Must possess a valid American Welding Society - Certified Welding Inspector credential Must have advanced knowledge of ASME Y14.5 specification Must have fundamental knowledge of ASME Sections VIII and V Prior experience with ASME NQA-1 and 10CFR50 Appendix B preferred Ability to work independently and direct coworkers Bachelor's degree in engineering or quality related field with 2+ years of experience or 10+ years in Quality Control role Strong verbal and written communication skills Self-motivated with attention to detail and accurate reporting Proficient in MS Office suite products EDUCATIONAL/PHYSICAL REQUIREMENTS Two- or four-year college degree or relevant experience in inspection activities Everyday bending, crouching, stooping, standing, and overhead reaching Everyday exposure to moving machinery, dust, dirt, grease or other disagreeable elements Lifting up to 50-75 lbs. Must be able to pass and complete a physical assessment Must be able to perform the essential functions of the job with or without accommodation R-V Industries, Inc. is an equal opportunity employer. R-V Industries, Inc. is an equal opportunity employer. Monday-Thursday 6:00 am - 4:00 pm

Knowledge, Skills, & Abilities: Strong problem-solving mindset. Team-oriented with effective communication skills. Committed to accuracy, consistency, and continuous improvement. Frequent use of hands and inspection tools in a manufacturing environment. Able to balance quality control with production demands.

Knowledge, Skills, & Abilities: Strong problem-solving mindset. Team-oriented with effective communication skills. Committed to accuracy, consistency, and continuous improvement. Frequent use of hands and inspection tools in a manufacturing environment. Able to balance quality control with production demands.

Quality Technician The role of the Quality Technician is to ensure GMP compliance throughout the execution of labeling, assembly, and packaging activities. The Quality Technician is responsible for supporting Operational activities that directly impact manufacturing. The primary activities include performing line clearance verifications, adjustment of AQL sampling quantities, completing real-time and end of batch review of documentation such as batch records and logbooks, and taking Finished Good and Special Request samples as required throughout the labeling, assembly, and packaging processes. ESSENTIAL DUTIES AND RESPONSIBILITIES: The following is a list of minimum responsibilities required of the Quality Technician position. Other duties may also be assigned. • Ensure all batch record documentation is accurate (lot numbers, expiration dates, items number and related data are consistent throughout the record; AQL Report is accurate), and complete. • Read and understand process steps within the batch record to ensure compliance during the packaging process. • Review batch records for any additional requests, memos, deviations, change controls, material request transfer forms, etc. and ensure appropriate actions are taken. • Ensure room/equipment cleaning logs have been completed as applicable. • Pull all Finished Good (Reference, Retain and Reserve) and special request samples as required in batch record and material request transfer forms • Support operations by completing line clearance verifications after room clean activities. • Responsible for notifying supervision if any abnormal occurrences are observed while performing job responsibilities. QUALIFICATIONS: To perform this job successfully, the candidate must be detailed oriented. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • One (1) year of related pharmaceutical experience or training. • General knowledge of FDA regulations related to cGMPs is required. • General knowledge of quality control/assurance is required. • Strong written and verbal communication skills are required. • Strong foundation in basic mathematical skills (addition, subtraction, multiplication, and division) • Strong problem solving and critical thinking skills. • Strong organizational and planning skills are required. SUPERVISORY RESPONSIBILITIES: This position will have no supervisory responsibilities. PREFERRED / REQUIRED EDUCATION and/or EXPERIENCE: An associate or bachelor's degree is preferred PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, and color vision. WORK ENVIRONMENT: The work environmental characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is normally exposed to moving mechanical parts. The noise level in the work environment is usually moderate. DISCLAIMER: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.

Knowledge, Skills, & Abilities: Strong problem-solving mindset. Team-oriented with effective communication skills. Committed to accuracy, consistency, and continuous improvement. Frequent use of hands and inspection tools in a manufacturing environment. Able to balance quality control with production demands.

Knowledge, Skills, & Abilities: Strong problem-solving mindset. Team-oriented with effective communication skills. Committed to accuracy, consistency, and continuous improvement. Frequent use of hands and inspection tools in a manufacturing environment. Able to balance quality control with production demands.

Knowledge, Skills, & Abilities: Strong problem-solving mindset. Team-oriented with effective communication skills. Committed to accuracy, consistency, and continuous improvement. Frequent use of hands and inspection tools in a manufacturing environment. Able to balance quality control with production demands.

Precision Aviation Group (PAG) is a leading provider of products and value-added services to the aerospace and defense industries worldwide. With over 1.1 million square-feet of sales and services facilities in the United States, Canada, Australia, Singapore, Brazil - PAG's 27 locations and customer-focused business model serve aviation customers through Supply Chain and Inventory Supported Maintenance, Repair and Overhaul (ISMRO) services. JOB PURPOSE This position involves receiving and inspecting components for repair and overhaul, generating pre-established technical documentation and shop travelers, and performing approvals for return to service after maintenance or modifications of an engine or article in accordance with regulations. Duties include completing FAA Forms 8130-3 and 337 as required, preparing logbook entries, and ensuring each engine or component returned to service meets type design or properly altered condition and is safe for flight. The QA Inspector verifies that all inspections are performed in compliance with the manufacturer's Instructions for Continued Airworthiness and the Keystone Turbine Services Repair Station Manual. JOB DUTIES AND RESPONSIBILITIES Essential Job Functions: Receiving incoming components for repair / overhaul Perform work order opening and closing tasks, preliminary inspections, hidden-damage inspections, statement of work review, and final inspections on civil aviation articles in accordance with the current maintenance data. Enters the return to service / airworthiness release authorization into the aircraft / article's permanent records (logbook) along with a list of the work performed. Review completed production control work packages for completeness and proper signoff, prior to execution of an airworthiness release or issuance of a serviceable tag Generating documentation, technical data and shop travelers using customer repair orders as guidance. Perform visual and dimensional inspections using manual inspection tools to determine serviceability Maintain FAA Documentation / Record Keeping Verify Customer Repair Work Scope Review Logbooks/Time Life Parts/Service Bulletins/Airworthy Directives Perform Final Inspections / Generate FAA / EASA/ UK Documentation Assist in Maintaining FAA/AS9110C Quality System Identify and communicate continuous improvement opportunities for quality program WORKING CONDITIONS Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This position may require walking primarily on a level surface for periods of time as well as reaching above shoulder heights or below the waist or lifting as required to file documents or store materials throughout the workday Must be able to lift up to 50 lbs. occasionally. Must have close vision, color vision, and depth perception necessary to perform detailed inspections Equipment Operated: Ability to operate office machines. Work Location: Keystone Turbine Services - Coatesville, PA. Work is performed indoors in a clean, climate-controlled facility. Potential Hazards: Exposure to materials identified on Material Safety Data Sheets. JOB SPECIFICATIONS Knowledge, Skills and Abilities: Must have a minimum of 5 years' Aviation experience. Must be a Highly Motivated individual Must possess Excellent Organizational and Communication Skills Must have Data Entry Skills / computer literate Must be able to read, write and understand English Must pass FAA/DOT Pre-Employment drug test and background screen, also will be subjected to random drug and alcohol testing. Education/Training: Minimum of a H. S. Diploma or GED. Experience: Minimum of 3 years' Quality experience. Certificates/Licenses: FAA Airframe & Powerplant Certificate preferred; candidates without A&P must be willing to obtain it. We offer competitive pay and a comprehensive benefits package designed to support your well-being and work-life balance. Full-time associates are eligible for health benefits starting the first of the month after 30 days of employment. Our benefits include four medical plans, two dental plans, vision coverage, company-paid life insurance, voluntary life insurance, short- and long-term disability, flex spending accounts, and telemedicine services. In addition, you'll enjoy vacation and PTO time accrued with each pay cycle, with a vacation carryover/payout option at year-end, 9 paid holidays, and a 401(k) plan with company match contributions. Qualified candidates with a strong drive, work ethic, and commitment to quality are invited to apply today. Visit www.precisionaviationgroup.com and select the Careers tab at the bottom of the page to get started! AA/EOE/M/F/D/V

Our Jonestown Distribution Center, a 218,000 sq. ft. refrigerated facility operating 24/7, is currently seeking a Quality Control Inspector to join our team. The essential function of this position is to assist the Quality Control team with daily activities and ensure that all product meets customer specifications and to proactively prevent rejections. Rotational Full Time Shift: 3 Day & 4 Day Week: 6:00 PM - 5:30 AM Primary Function: The Quality Control Inspector will assist Quality Control Inspection Supervisor with all daily activities and to ensure that all product meets customer specifications. This position collaborates with the Quality Control Inspection Supervisor, and other warehouse personnel to proactively prevent rejections. Values: To perform the job successfully, the incumbent's behavior must be consistent with the PRIDE values expected of all Mastronardi Produce employee's: be Passionate; have Respect; be Innovative; be Driven and strive for Excellence. Primary Responsibilities: * Ensure that all product meets or exceeds customer specifications. * Ensure allocation is followed, validate correct product is pulled and shipped to customer. * Assist Quality Control Inspection Supervisor to ensure that all product inspections are being performed, labeling specification are adhered to, and non-conformance product is pulled and corrected. * Flex Between the shipping dock, receiving dock and production to assist Quality Control Inspection Supervisor with Quality issues and/or inspections. * Report any exceptions to the customer specifications to Quality Control Inspection Supervisor. * Send out Quality Issues Emails for Non-Compliant Product. * Oversee floor operations when the Quality Control Inspection Supervisor is unavailable. * Remember recent rejections and rejection trends. * Ensure Product packaging is in presentable condition for our customers. * Ensure Presentation is of highest standards. * Performs any other Quality Control related tasks or special projects as assigned. * Provide training when required. Education/Background Requirements: * 1 Year College degree or 6 Months year of experience in a related field required. * Previous experience in produce industry preferred. Specific Knowledge, Skills and Abilities Required * Must pass Drug Test, Background Check and pre-employment Skills Testing. * Must sign a confidentiality agreement upon hire. * Must be a self-starter and willing to work flexible hours. * Proficiency in use of English language with the ability to communicate effectively and professionally. * Proficient in computer-use skills (MS Office: Word, Excel and PowerPoint). * Strong organizational, analytical and problem-solving skills. Need to be creative, adaptable and able to accurately work with a sense of urgency. * Spanish as a second language would be an asset. * Inspection/audit experiences, working in software applications are considered assets. * Proficient in basic computer skills, JDA or NAV experience preferred. * Ability to use and read measuring devices such as scales, calipers, ruler. * Excellent communication and interpersonal skills. Working Conditions: * Environment includes an expansive refrigerated warehouse, where the temperatures range is 45-55 degrees (except office areas). The background noise approaches 70 dcbs. * Must be capable of lifting up to 35 lbs. Please note: Mastronardi Produce has accommodation processes and policies in place and provides accommodation for employees with disabilities. If you require a specific accommodation because of a disability or documented medical need, please contact the Human Resource office so that arrangements can be made for the appropriate accommodation to be put into place.

Job Title: Quality Technician Department: Quality Department Job Function: Quality Control, Calibration, Auditing FLSA Status: Salaried Non-Exempt Reports To: Director of Quality Schedule: 1 st Shift SUMMARY The Quality Technician is responsible for driving quality system excellence and ISO 9001 compliance at the Pennsylvania facility while supporting corporate-wide quality initiatives. This role leads internal audits across all locations, manages RMA and calibration programs for the PA site, supports NSF certification processes, and performs investigations into incoming and in-process quality issues. This position collaborates cross functionally to improve quality performance, maintain regulatory compliance, and support data-driven decision-making across production, supplier management, and customer feedback. ESSENTIAL DUTIES AND RESPONSIBILITIES Serve as primary ISO 9001 internal audit lead for all facilities and supports the Director of Quality for the yearly registrar audit. Maintain and improve QMS documentation, procedures, and records for the PA facility. Coordinate NSF audit preparation and ongoing certification maintenance. Support customer, regulatory, and 3rd-party audits. XRF inspection of incoming brass to confirm lead-free. Issue certifications to customers for country of origin, Prop 65, AIS, etc. Lead corrective action (CAPA) activity for PA facility and support corporate CAPAs. Oversee supplier corrective actions and validate results as necessary. Manage and process RMA activity; coordinate disposition and root-cause actions. Support production operations regarding any quality issues and identify potential issues for preventative actions. Manages the calibration program for PA facility and coordinates external calibration vendors. Support containment, root cause analysis, and verification of effectiveness for corrective actions. Identify and drive improvements in inspection, audit, and documentation processes. Support continuous improvement initiatives. Assist with the maintenance of training records for the PA facility. Manages the shelf-life program for the facility. Process non-conformance reports. SUPERVISORY RESPONSIBILITIES This position has no direct reports but may direct daily activities for both support and production personnel, or for trainees under the guidance of Management. TRAVEL Occasional travel may be required (less than 10%) for training, supplier visits, or off-site calibration/lab support. QUALIFICATIONS REQUIRED High school diploma or GED required; Associate degree in a technical discipline or formal metrology training preferred (GD&T). 3+ years manufacturing quality or QMS administrator/auditor experience. Knowledge of ISO 9001 standards and internal auditing methodology. Experience with nonconformance investigations and corrective actions. Strong proficiency with MS Office and ERP-based quality workflows. Excellent communication and documentation skills. PREFERRED Calibration program oversight experience. NSF or third-party compliance experience. Familiarity with machining environments print reading. Root cause and problem-solving methodology training (8D, A3, PDCA, etc.). ASQ Certification (CQE, CQT, or CQA) a plus. PHYSICAL DEMANDS Frequent standing, walking, and manual handling of parts and gaging equipment. Occasional lifting of materials up to 30 pounds. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to walk. The employee is occasionally required to stand. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Must adhere to safety protocols and maintain a clean, organized work area. The noise level in the work environment is usually moderate, but at times very loud.

Quality Control Inspector Opportunity - Macungie, PA HTSS is seeking a highly meticulous Quality Control Inspector to join a respected electronics manufacturer in the Macungie area. This role is essential for ensuring the quality and reliability of electro-mechanical and printed circuit board PCB assemblies, offering a strong Temp-to-Hire path. Compensation and Schedule Location: Macungie, PA Schedule: Monday-Friday, 7:30AM - 4PM Pay Rate: $19/hour Type: Temp-to-Hire Core Responsibilities As the QC Inspector, you will act as the final check on product quality: Inspection: Inspect components and assemblies, verifying dimensions using precision measuring tools (e.g., calipers, micrometers). Testing: Conduct functional tests on final assemblies according to established procedures, utilizing test equipment. Documentation: Accurately document all inspection results, track defects, and maintain quality records. Quality Assurance: Collaborate with production to resolve quality issues, suggest corrective actions, and ensure adherence to all quality system processes. Support: Assist with inventory processes, ERP data scanning, and participate in rework/repair of defective assemblies, which may include light soldering. Candidate Profile and Requirements We are seeking a detail-focused professional prepared for a fast-paced environment: Required Experience: Previous experience in a Quality Control or similar inspection role is mandatory. Visual Acuity: Strong attention to detail and excellent visual acuity, including accurate color identification. Technical Skills: Able to read and interpret blueprints, schematics, and technical drawings. Proficient with measuring instruments and Microsoft Office (Word, Excel). Physical: Comfortable sitting or standing throughout the shift and lifting up to 30lbs. Preferred: Prior experience in electronics manufacturing, familiarity with IPC-A-610 standards, and soldering experience are a definite plus. Apply Today If you are ready to apply your inspection expertise to a rewarding role, we want to hear from you. Text "QC Inspector" to ************ to apply!

Salary: Do you want to work for a construction company unlike any other? At JGM, we challenge the industrys status quo. Known as the team that delivers When You Need It Yesterday, weve built a culture around safety, quality, and speed. At JGM, were more than a company-were a family. Working side by side, we support one another, building trust by knowing we can count on each other. Driven by our core values, mission, and purpose, we stay focused on our vision for the future. The result? A team environment that fuels exceptional employee satisfaction, which in turn drives extraordinary client experience and continued company growth. The only question is: Are you ready to join our growing family and be part of something truly special? Be an integral part of the JGM family by living our core values: We Plan. We Adapt. We Succeed. Uncompromising Safety & Quality. Family is Our Foundation. Create Value Through Better Solutions. Whatever it Takes. Commitment to Self-improvement. Our Purpose (FOREVER): Develop Elite Leaders Today, So We Can Build Tomorrows Future Our Vision (ONE DAY): Driven to be the Safest, Fastest, and Most Effective Industrial Construction & Fabrication Partner in North America Our Mission (TODAY): Solve Our Clients Toughest Challenges with Safety and Quality Top of Mind Position Overview JGM is seeking a talented QC Inspector to join our growing team! The perfect candidate is a professional who thrives on tackling challenges in an exciting, fast-paced environment. This position will inspect raw materials, in-process work and finished products for conformance to shop drawings, specifications, and codes by performing the below duties. Responsibilities Conduct complete layout inspections, measuring dimensions (length, height, angles, radii, etc.) using precision instruments (micrometers, calipers, gauges, etc.) to ensure compliance with drawings, specifications, and codes. Verify quality at all stages: incoming materials, in-process work, and final products. Visually inspect parts, welds, bolts, coatings, and assemblies; compare pieces to detect variations; enforce standards and legal requirements. Interpret and apply shop drawings, specifications, ASTM codes, AISC standards, DOT requirements, and welding/bolting/painting codes. Maintain accurate inspection records, defect lists, and calibration of measuring equipment; coordinate with departments to resolve quality issues. Support operator training on measurement, visual acceptability, and processes; assist with internal and external audits. Manage NDE (Non-Destructive Examination) training, testing, certification, and documentation; maintain CWI certification. Review and approve quality-related purchase orders, reports, and testing requirements. Assist in developing procedures, quality summaries, and corrective actions; enforce non-conformance protocols. Serve as liaison with outside inspectors; investigate shop/field errors and support resolutions. Perform other QA-related tasks as required by supervision. Qualifications Strong knowledge of welding symbols and diagrams, and inspection tools. Highly proficient in reading blueprints and other printed instructional material. Basic Math & Geometry/Trigonometry. Familiar with variety of weld processes: Flux Core Arc Welding (FCAW), Sub Arc Welding (SAW), Gas Metal Arc Welding (GMAW), and/or Gas Tungsten Arc Welding (GTAW) Ability to perform and document inspection activities during fabrication and welding of structural piece members. Microsoft Office. CWI preferred. Self-motivated, collaborative team member. Safety focused. Operates equipment and champions safety initiatives. Education High School Degree or GED Equivalent preferred Minimum of seven years related experience and/or training in steel fabrication; or an equivalent combination of higher education and experience in the steel fabrication industry or closely related fields. Physical Requirements The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requires prolonged walking, standing, sitting, bending, squatting, stooping, climbing, regular lifting and carrying to move up to 50 lbs., talking, hearing, reaching, feeling, grasping, and push/pulling. Must be able to work in various weather conditions/temperatures. Regular mental and visual attention much or all the time with manual coordination. General office environment conditions. Flexibility required to travel. JGM offers a competitive wage and benefit package: Participate in the companys yearly performance bonus program Medical, Vision & Dental PTO & Holidays 401(k) + Matching Life Insurance Short/Long-Term Disability Employee Assistance Program Generous Referral Program Training and Further Education This job description is subject to change based on the needs of the business and is notall-inclusive. JGM is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.