Quality inspector jobs in Tyler, TX - 1,505 jobs

Who We Are: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law.

We Are Artificial Lift. It's what we do. All day. Everyday. Flowco is redefining well “optimization” with the very latest in USA manufactured gas lift and plunger lift technologies and delivering unrivaled customer support wherever and whenever you need it. We are seeking a QUALITY ASSURANCE INSPECTOR (2nd Shift) to become an integral part of our team! This position is located in FORT WORTH, TEXAS. Job Summary : Preserve the quality standards of products by the inspection of incoming materials, in-process work, finished products, and recording the quality results Responsibilities may include, but are not limited to: Read blueprints and use inspection equipment Inspect, test, or measure materials or products being produced (primarily machined parts) Inspection and measuring equipment calibration duties (machine shop related equipment) Develop and conduct various inspections on inbound materials from suppliers and outbound internally made products (machined parts and assemblies) Ensure that the quality check procedure in place are followed during every manufacturing phase Create comprehensive documentation for quality issues and document the corrective actions that were taken Educate the manufacturing team on quality control issues and work with departmental supervisors to improve overall product quality Create process checklists and coordinate quality inspections with departmental supervisors Required : High School Diploma/GED Required : 2-year minimum QA experience Preferred : 5-year minimum QA experience Preferred : Valid & Current CWI certification (welding inspection) Preferred : Valid & Current CWI certification (welding inspection) Preferred : Oil & Gas product/material/manufacturing industry experience Preferred : Experience with component/assembly inspection Must be able to lift up to 75lbs Must be able to stand for 8+ hours per shift Must be able to read, give, and take direction in English Must be able to work full time and have great attendance Must pass drug screen & background check Must have excellent communication skills Must be detailed oriented, have basic math skills and computer skills Must have a courteous and positive attitude, also have a sense of urgency, drive, pride, and desire to succeed Will be working in a shop environment Well versed at analyzing information, reporting investigation results, and have solid documentation skills Performs tasks associated with the quality control inspection of various products while meeting productivity, quality, safety, behavioral, and attendance expectations Experience with inspecting parts made in a machine shop and the typical inspection equipment typically used to inspect machined parts. 3+ experience using CMM machine is a plus. NO RECRUITERS/HEADHUNTERS/STAFFING AGENCIES Unsolicited emails or calls will not be read or returned

Job Title Construction SSHO/QC Education Bachelor's Degree or Equivalent Career Level Experienced (Non-Manager) Category Construction Salary Grade Date Needed By Job Type Full-time Travel Job Description Site Safety and Health Officer/Quality Control (SSHO/QC) The SSHO/QC is responsible for managing the daily QC responsibilities of specific projects to ensure the project is constructed in accordance with the established standards. The role will include direct oversight and review of the entire project from design to completion. The CQCM will work closely with project managers, construction superintendents, the client's representative on site, and other key personnel. This position also has the overall responsibility to implement safety, health and environmental programs and procedures within the worksite in pursuit of a zero-incident culture. Maintain best practices designed to enhance and improve regulatory compliance, as well as minimize industrial injuries/illness, workers' compensation costs, property damage and other general liability losses. Responsibilities Participate in the Post Award Kick-off, Partnering, Preconstruction, Design Development, and Coordination and Mutual Understanding Meetings. Implement the "Three Phase of Control" plan. Ensure that no construction begins before the DOR has finalized the design for that segment of work, and construction submittals are approved as required. Inspect all work and rework, using International Conference of Building Officials certified QC specialists as applicable, to ensure its compliance with contract requirements. Maintain a rework log. Immediately stop any segment of work, which does not comply with the contract requirements and direct the removal and replacement of any defective work. Prepare daily QC reports. Ensure that Contractor Production Reports are prepared daily and align with the daily QC reports. Hold weekly QC meetings with the Commissioning Authority, DOR (or representative), Superintendent and the Contracting Officer/CE on site; participation shall be suitable for the phase of work. Ensure that design and construction submittals are reviewed and approved, as required by the contract, prior to allowing material on site and work to proceed with these items Maintain a submittal register Update As-built drawing daily, maintaining up-to-date set on site. Maintain a testing plan and log. Certify and sign statement on each invoice that all work to be paid under the invoice has been completed in accordance with contract requirements. Perform punch-out and participate in Pre-final and Final Acceptance Inspections. Submit list of deficiencies to the Contracting Officer for each inspection. Correct all deficiencies prior to the Final inspection. Notify Contracting Officer prior to final inspection to establish a schedule a date acceptable by the Contracting Officer. Ensure that all required key, operation and maintenance manuals, warranty certificates, and the As-built drawings are correct and complete, in accordance with the contract, and submitted to the Contracting Officer. Assure that all applicable tests special inspections, and observations required by the contract are performed. Coordinate all factory and on-site testing, Testing Laboratory personnel, QC Specialists, and any other inspection and testing personnel required by this Contract. Notify the Contracting Officer of any proposed changes to the QC plan. Retain a copy of approved submittals at project site, including Contractor's copy of approved samples. Update the Performance Assessment Plan as described in the UFGS section 01 31 19.05 20 POST AWARD MEETINGS and discuss monthly at QC meeting. Coordinate training of Government maintenance personnel with the eOMSI Preparer to assure training materials and training classes are accurate and provide instruction and documentation on critical elements of the products, materials, and systems in the constructed facility. Create and implement the requirements of the Health and Safety Plan (HASP or APP Accident Prevention Plan) Evaluate personnel performing tasks Determine that all personnel are properly trained, qualified, equipped, and physically protected from the site and operational hazards. Effectively implement LPS's site specific safety and health program Initiate and authorize a "Stop Work" order for any imminent S&H concerns; Lead daily safety meetings Conduct and document site training related to site-specific hazards Specify proper levels of PPE, per the requirements of the HASP In conjunction with the Site Supervisor, investigate and report in a timely manner any injuries, illnesses, accidents, incidents, or near misses, and ensure that proper procedures are followed through the investigation Conduct visitor orientation, daily safety inspections, and weekly safety audits. Properly complete the requisite safety and health related forms to capture required safety and health data. Provide the Site Supervisor with task hazard data for any new tasks or any tasks that significantly change during the conduct of site operations Assess each task and assess the effective implementation of the safety and health provisions required by the HASP Skills and Qualifications Bachelor's Degree in Engineering, architecture, or construction management and 5 years QCM experience on USACE, NAVFAC, DoE, or DoD projects (10 years' experience as QCM will be considered in lieu of education). Complete the course entitled "Construction Quality Management (CQM) for Contractors" and maintain a current certificate. Familiar with requirements of USACE EM 385-1-1, and experience in the areas of Activity Hazard Analysis (AHA), Accident Prevention Plans (APP) and safety compliance. 3-5 years of experience as a SSHO to include industrial, construction safety, and environmental protection. 30 Hr. Construction Safety Course with required yearly professional development hours CPR/FA training Understanding of FAR/DFAR requirements. Must possess and retain a valid driver's license Must be able to acquire and retain valid base access (if applicable) Must be able to pass a Federal Background Check Supervisory Responsibilities none Classification This is a full-time exempt position that reports to the Project Manager. Physical Demands Individuals must have the ability to lift 30 pounds. Must be able to remain in a stationary position at least 50% of workday and capability to move within the field. Any person in this position needs the ability to operate any field equipment used within the Construction Industry. There is a requirement to traverse multiple terrain types in outdoor weather conditions along with the ability to position self in a stoop, kneel, or crouch position. Individuals must be able to wear full construction PPE and have ability to enter confined spaces. # of Hires Needed 1 Exemption Type Exempt

Braun Intertec is seeking an Entry-Level Construction Materials Testing Technician to join our Tyler, Texas office. As a technician, you will learn to perform a variety of testing on construction materials such as soils, concrete, masonry, and asphalt. Onsite materials testing is conducted on various commercial and transportation construction projects. The chosen candidate(s) will receive in-depth technical training and industry certifications upon successful completion of examinations and demonstration of ability. This is a career opportunity to become a member of a highly successful, fast paced team with a steady and growing backlog of exciting projects. Candidates should be comfortable working outdoors in varying weather conditions and be able to lift 50-75+ pounds. Responsibilities: Perform field density tests of soils Perform field concrete testing, including slump, air content, and strength Prepare daily reports Work with project managers and senior technicians or staff to ensure specifications are followed Perform routine sampling and testing of soils, aggregates, concrete, masonry, and asphalt and assist with more complex tasks, as required The ideal candidate will have: A strong safety focus and attention to detail A demonstrated ability to learn and apply technical concepts Flexibility to work extended or nontraditional hours as needed Excellent verbal and written communication skills Related work experience in materials testing or construction is a plus All candidates must have: A High School diploma or equivalent A valid driver's license with clean driving record for the last 3 years The ability to lift 50-75+ pounds #LI-MJ1 Check out this video to see what life is like as a CMT: **************************** Braun Intertec employees are encouraged to expand their skills and certifications through company provided training and mentoring. Braun Intertec is a Drug-Free Workplace and requires all new hires to complete a pre-employment drug screen test, criminal background check, and motor vehicle report. Braun Intertec offers a competitive compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, PTO, Employee Stock Ownership Program (ESOP), and paid holidays. Compensation Range: $39,600.00 - $59,400.00 As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, veteran or disability status. Braun Intertec strives to ensure that its careers web site is accessible to all. If you need assistance completing your online application, please email ************************. As an Equal Opportunity Employer, Braun Intertec is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans. If you need a reasonable accommodation to assist with your job search or application for employment, please e-mail us at ************************. In your e-mail, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Join Komatsu and Be Part of Something Big! Are you ready to build something BIG? Komatsu in Longview, Texas is currently searching for a safety and quality minded individual to join the our Quality department. As a fabrication inspector, this dynamic indiviual will be working hands on with various inspection processes, collaborating with team members as well as supervision ensuring the quality standard. Komatsu offers excellent benefit package, competitive pay, annual bonus potential, and annual merit reviews. Key Job Responsibilities Work safe and be an advocate for safety. Visual inspection of manufactured parts and raw materials per drawing requirements. Hardness testing of raw materials and manufactured parts using the Brinell and Rockwell hardness testing methods. Prioritizes raw materials and parts for the various inspection processes. Requires the ability to prioritize raw materials and parts for the various inspection processes. Set‐up of all types of gages for use in the inspection processes. Requires the ability to set‐up all types of gages for use in the inspection processes. Knowledge of visual inspections processes and procedures. Knowledge of surface conditions of materials & machined surfaces. In‐process and final inspection of assembled equipment such as Feeder Breakers, Wheeled Loaders, Sizers, Drills, etc. per the requirements of applicable drawings, specifications, procedures & work instructions. Qualifications/Requirements Must have completed required training in the areas selected for specialization such as Assembled Equipment, CMM, Faro Laser Tracker, Faro Arm, Gear Check, Metals & Physical Testing Lab, or Gage Lab. Must have completed academic requirements for American Society for Nondestructive Testing (ASNT) Recommended Practice SNT‐TC‐1A Qualified to use both Brinell and Rockwell hardness testing machines. Minimum of two years Machinist, Inspection or Dimensional inspection experience. Ability to read, analyze, & interpret general business periodicals. Self‐starter, able to prioritize & multi‐task with good analytical skills. Ability to calculate figures & amounts such as proportions, percentages, area, circumference & volume. Experience with dimensional mechanical measuring tools such as micrometers & calipers. Ability to understand and interpret drawings and technical requirements. Knowledge of receiving, in‐process and final inspection processes and procedures. Additional Information Hiring Range At Komatsu, your base pay is one part of your total compensation package. This role pays $0.00. The actual offer will consider a wide range of factors, including experience and location. Company Benefits Komatsu provides an extensive and robust employee benefits package that is designed to enhance the well-being of our employees and family members. We embrace a positive and empowering employee experience with a culture that prides itself on a diverse and inclusive environment. * Health benefits: Medical, dental, vision, HSA, wellness programs, etc. * 401k and/or employee savings programs * Employee time off (vacation and designated holidays) * Employee and family assistance programs * Disability benefits * Life insurance * Employee learning and development programs Diversity & Inclusion Commitment At Komatsu, we come from diverse backgrounds, with unique perspectives, experiences and contributions. We believe that our people are part of our shared purpose. Connected by our core values of ambition, perseverance, collaboration and authenticity, we are committed to continually advancing in our support of diversity and inclusion. United, we are on a journey towards a sustainable future that creates value together. Company Information Komatsu develops and supplies technologies, equipment and services for the construction, mining, forklift, industrial and forestry markets. Headquartered in Tokyo, Japan, Komatsu employs more than 64,000 people worldwide, operating in more than 140 countries. For more than a century, the company has been creating value for its customers through manufacturing and technology innovation, partnering with others to empower a sustainable future where people, business and the planet thrive together. Since the company's founding in 1921, Komatsu has been committed to supporting individuals and communities through job training, skills development and giving back. As a Komatsu employee, you will be encouraged to grow alongside our global company, contributing to a more sustainable future for all. If you are looking for a company that values your talent and potential, join Komatsu to be a part of something big and help advance modern society. Learn more at **************** EEO Statement Komatsu is an Equal Opportunity Workplace and an Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Come Grow with Us!! The purpose of the Quality Assurance Technician is to support production and ensure consistent product quality. This is achieved through in line sampling, internal and external sorting, and product testing on laboratory equipment to ensure product meets or exceeds customer expectations. ESSENTIAL DUTIES Perform product testing at designated intervals and during machine/job startups and provide feedback on quality measures Perform Job Audits of completed jobs for accuracy and report waste Review job jackets in process and confirm the tools required for manufacturing are available and correct Sort internal and external product for defects, coordinate staging, removal, and inventory level changes Assist in training personnel on best known methods of defect identification and new SOP implementation Actively promote following procedures and all measures of detection, correction, and prevention of defects Participate in root cause and corrective action process to eliminate and reduce manufacturing defects Support the manufacturing process contributing to overall plant success We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Pay: DOE Powered by JazzHR YFEkWfxdvE

Oversees logs and procedures and ensures Q.C. and Production are abiding by GMP and GLP company rules set forth by company SOPs. Ensuring things are made right in the first place is the best way of preventing out of specification products. ESSENTIAL DUTIES AND RESPONSIBILITIES: Includes the following, but other duties may be assigned as the company's needs dictate. Reviews and approves the Production filling batch records. Checks and audits the documents for accuracy and GMP compliance during and at the completion of filling. Checks and confirms that the correct components and compounding batch have been set-up and are being used on the appropriate packaging line. Reviews the data reported by the mechanics, machine operators, and line leads to ensure that the information is correct and entered appropriately. Responsible for placing compounded batches and finished goods that do not conform to company specifications into Quarantine status with applicable labeling. Reports any quality issues to Quality management and participates in investigations, as necessary. Performs daily housekeeping audits of the Production area logbooks and reports results to Quality management. Supports GMP training of employees. Participates in Quality System audits as directed by Quality management. Complies with Health, Safety, and Environmental responsibilities for the position. Inspects the production lines to ensure that both Production and Quality control personnel are following the required SOP to perform their jobs. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or GED (general education degree) and some college (science-based courses preferred). Minimum 6-months of hands-on experience as Quality audit/inspector in cGMP environment; preferably in pharmaceutical, biomedical, or medical device field (regulated industry). Experience with batch record keeping, CAPA initiation, and deviation investigation. Should have experience working on the floor of a manufacturing facility. LANGUAGE SKILLS: Fluent in reading, writing, and speaking the English language, as well as having experience with technical writing (knowing Spanish is a plus). Ability to read, analyze, and interpret professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from departmental manager/supervisor or other employees. MATHEMATICAL SKILLS: Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. COMPUTER SKILLS: To perform this job successfully, an individual should have knowledge of Database software, Spreadsheet software and Word Processing software. REASONING ABILITY: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to stand, walk, talk or hear, and taste and smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles (herbal powders). The noise level in the work environment is usually quiet. Sunrider Manufacturing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Title: Distribution Inspector Level 3Location: El Paso, TXDuration: Long TermDescription:· Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. · Work shall be performed in accordance with Company standards and 49 CFR 192· Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications:· Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on poly fusion projects. · Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, TVC, and ONE MAP. · CPWI· API 1169· Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. · Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About Us: Skeeter Products, Inc. is a leading boat manufacturing company, known for producing state-of-the-art, high-performance Bass Fishing Boats that set the standard in the boating industry. Our reputation for quality craftsmanship and innovation has made us a top choice for boating enthusiasts worldwide. We're looking for someone with previous quality experience in a manufacturing environment to join our dynamic team as a Quality Inspector and help us continue producing world-class boats. JOB SUMMARY: Responsible for assisting in daily QA activities as assigned for various areas of boat and trailer plant. Duties include part and process inspections, process reviews, QA projects, reporting, and all other duties as assigned. JOB DUTIES: Assist daily QA inspection workflow at assigned area Assist in interdepartmental communication of QA Department process Perform data logging Assist in QA projects and procedures at assigned area Confirm product is built to work order and quality specifications Fill out and file proper check sheets and reports Cross assist inside Quality Department Any other duties or training assigned QUALIFICATIONS: Understanding of Skeeter QA Processes Understanding of boat and trailer mechanical systems Understanding of boat and trailer cosmetic appearance Must have strong communication skills Working ability of MS Office products Ability to read and write English Color sensitivity Work overtime as needed Ability to lift up to 50 lbs. Ability to work in heat Ability to work around fumes, chemicals, dirt and dust Color sensitivity and good visual acuity Manual dexterity Have good attendance habits Ability to follow instructions accurately

Biomerics is a world-class manufacturer and innovative polymer solutions provider for the medical device and biotech industries. As a vertically integrated company, we specialize in designing, developing, and producing medical devices for diagnostic and interventional procedures. We are focused on next-generation solutions for vascular access, electrophysiology, cardiac rhythm management, neurovascular, structural heart, and cardiovascular markets. At Biomerics, we are dedicated to our diverse employee base. We understand that a strong, skilled, and engaged workforce is the foundation of our continued success as a business. We strive to live up to the Biomerics values in all our interactions. It is an exciting time to be part of our collective team, and there is no limit to the impact that can be achieved here at Biomerics. We improve and advance the lives of our employees and patients who depend on our products. At Biomerics, we believe in integrity, partnership, empowerment and accountability, trust, agility, teamwork, and excellence, and we care. Our team-oriented, customer-focused corporate culture prioritizes building strategic, mutually beneficial partnerships with customers and our team members. Job Description This entry level role will perform the inspection process, ensuring that the product is inspected to established specifications before placing it into useable stock. Job Responsibilities Perform inspections of materials, components, sub-assemblies and finished devices at all phases of manufacturing per released specifications. Identify the product, including the inspection and test status. Read and understand specifications and part drawings. Utilize and maintain hand tools, calibrated instruments, measuring equipment, microscopes, and test fixtures. Maintain controlled environment integrity by using proper attire and adherence to control room environment practices and procedures. Assist in processing non-conforming material throughout the manufacturing process. Requirements Education / Certifications High School Diploma/GED Equivalent Experience Job Requirements Inspection line experience a plus Experience in manufacturing/quality a plus Experience working within the medical device environment a plus Basic Math Skills Legible handwriting Attention to detail Can read a print Critical thinking skills Advanced Math skills Minimal errors with paperwork Excellent attention to detail Full knowledge of building/area of product/equipment Basic computer skills Works independently

Job DescriptionPosition Description: ITLE: Quality Control Inspector DEPARTMENT (S): Telecom Wireline (Cable/Fiber) DIRECT REPORTs: N/A REPORTS TO: Construction ManagerDuration: Permanent, Full-TimePay Rate: $23-$28 per hourU. S Citizenship Required The Quality Control Inspector is experienced in fiber construction. They are responsible for conducting quality assurance inspections of underground and aerial work of in-house technicians and subcontractors, during and after completion of a project. ESSENTIAL JOB FUNCTIONS Ensures adherence to and demonstrates a sound understanding of safety best practices and regulations Coordinate inspection activities with crews, subcontractors, safety, and field management Understands the scope of work of each project Conducts quality assurance inspections during and after completion of work to ensure compliance with customer specific requirements Recognizes and escalates persistent quality or other observed issues that could impact the ongoing relationship between client and company. Utilizes and demonstrates proficiency with construction tasks, tools, test equipment and information that will enhance quality results. Enter inspection findings in established company database in accordance with policy and procedures. Communicate project status and any work/schedule changes with subcontractors, local municipalities, and homeowners Assist in the preparation of red line prints and as-builds Monitor and track completion of job sites Other duties as assigned SKILLS AND ABILITIESUnderstands aerial, underground, and splice test variants Knowledge of aerial and underground cable/fiber construction practices Ability to read and interpret CATV/Fiber design prints Knowledge of splicing Ability to manage workload in an effective and efficient manner Knowledge of local DOT work zone standards. Conflict resolution skills Utilizes their experience to mentor and educate crew members Computer experience in Microsoft Office Suite and with various other construction programs Excellent at relationship building Ability to communication with clarity at the frequencies required by management and customers Ability to travel to multiple sites as required Work independently with minimal supervision MINIMUM REQUIREMENTS10 plus years in construction with at least 5 years in a leadership role Valid drivers license and excellent driving record Must be able to pass a pre-employment drug test Must be able to pass a DOT physical High School Diploma or GEDPREFERRED REQUIREMENTSPermitting ExperienceBi-lingual (Spanish/English) Undergraduate degree CDL License $23. 00 - $28. 00 Hourly

Job DescriptionPetroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

Amarillo Gear Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. SCOPE: The Tool Specialist will provide assistance with CNC machine tooling (tool bodies, inserts, endmills, grinding wheels, etc.) and hand tooling (wrenches, hardware, etc.) for the manufacturing plant. They will be responsible for organizing, inventorying, and repairing tooling in the tool crib, ordering special tooling, sending off tooling to be repaired, setting up and maintaining tool setup package carts for various work-centers, and assisting with part changeover at various CNC machines. They will work with different departments to improve production flow and on-time delivery throughout the entire manufacturing plant. EDUCATION REQUIREMENTS/ EXERIENCE: * 2+ years of hands-on programming experience preferred * Ability to write and understand machine code preferred * Inventory experience * Be comfortable in a fast-paced environment * Some experience with CAD/CAM software, such as Autodesk Fusion * Strong communication and documentation skills, with the ability to communicate with machinists on machine processes * Highly proficient in Microsoft Office (Excel, Word, Access, PowerPoint, etc.) * Mathematically inclined RESPONSIBILITIES: * Ensure each CNC machine has all the tooling required to manufacture various parts ahead of time to help production flow smoothly through the shop. * Coordinate tool tests with the CNC Programmer and report CNC programming changes that need to be made to improve tool life and part quality. * Clean up extra unused tooling at each work-center and inventory it to be sharpened or reused. * Set up tool packages for CNC machine changeovers to ensure CNC operators have all tooling they need to perform quick changeovers. * Inventory current tooling used at work-centers (such as custom-made boring heads) to help identify where spare tooling will be required to help production flow. * Assist the CNC operators in part changeover duties in pit-crew style changeovers to help the changeover go quicker and smoother. * Help complete program changes/transfers when CNC Programmer needs support. * Perform other duties, as assigned. REQUIRED PHYSICAL DEMANDS: * Standing for more than 1 hour, walking more than 100 ft., reach above, at or below shoulders, climb stairs, bend, stoop, and/or squat, grasping, hand/wrist twisting, lifting of up to 50lbs. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

AMERISPEC INSPECTION SERVICES IS INTERESTED IN HIRING THE NEXT GREAT INSPECTORS IN EAST TEXAS & LOUISIANA! Do you have what it takes to be that person? AmeriSpec Inspection Services is looking to hire Full Time Professional Inspectors. About AmeriSpec: We are a family owned and locally operated company that provides quality inspection services for our clients here in East Texas and Louisiana. We are committed to providing our staff the training, knowledge, and tools needed to be successful in the field while providing the excellent service that our clients demand. Essential Duties and Responsibilities: include the following. This position independently completes home inspections and ancillary services from start to finish. Other duties may be assigned. Attend annual regional AmeriSpec conferences Experience in Remediation, Water Damage, Trades, and/or an allied craft a plus Experience in writing protocols a plus Valid Driver's License and clean driving record Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Willingness to maintain records and communicate with Marketing Manager and Office Manager about job tasks Willingness to perform onsite educational seminars for real estate agents and other local professionals Willingness to comply with the State of Texas and governing agencies for licenses held Willingness to comply with the State of Louisiana Home Inspector Laws & Regulations and gain licensing in that state Perform other related duties as assigned Assist in marketing efforts as directed by a Marketing Representative Possess good communication skills and good computer skills Develop and maintain alliances with successful area real estate agents Work closely with Owner and/or Senior Inspectors to learn the essentials of Commercial & Home Inspections along with Mold Assessments and Protocols Independently perform home inspections from start to finish Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with little to no supervision. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's Degree or equivalent from four-year college or technical school; or six months to one year experience as an AmeriSpec Associate Inspector; Completion of state requirements by an approved TREC provider; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: Must be TREC licensed and willing to be licensed in the State of Louisiana Must comply with applicable state licensure requirements and continuing education Must be willing to receive ongoing training and licensing for our ancillary services that we offer Other Skills and Abilities: Good communication skills Ability to work independently Ability to learn new information Ability to learn new skills Relationship building Time management Organizational skills Mentoring and coaching skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is also regularly required to talk and/or listen. The employee is frequently required to stand, to walk, and to reach with hands and arms. The employee is occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl and to smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; risk of electrical shock and risk of radiation. The noise level in the work environment is usually moderate. Travel: This position requires extended periods of travel time, to and from job locations and areas where continuing education may be required. Inspectors are required to maintain cleanliness of personal vehicles at all times. Fuel expenses will be reimbursed. Benefits Career Advancement Opportunities Flexible Scheduling Great Work Environment Sick Time, PTO, and Health Benefits Plan AmeriSpec Inspection Services is an Equal Opportunity Employer Compensation: $20.00 - $24.00 per hour AmeriSpec offers the best training in the industry by combining classroom instruction, in-field inspections and hands-on technical training in our state-of-the-art facility, led by instructors with over 30 years of experience. A replica of a home, as well as a host of training aids such as a roof, water heater, plumbing, electrical panel and appliances are utilized during training. It is specifically designed for AmeriSpec business owners and inspectors and illustrates what to examine when performing a quality home inspection. Parts of the house are fully functional, such as the kitchen and indoor lighting. In addition, used water heaters, furnaces, and air conditioning units are brought into the classroom, giving inspectors the opportunity to examine these important home systems and components. This innovative facility includes a combustion safety simulator/residential pressure diagnostic tool. This provides AmeriSpec business owners and inspectors with the training needed to make them the best in the industry. Interested in a career with AmeriSpec? Please review our open positions using the filters above. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to AmeriSpec Corporate.

Department: Quality Assurance - 503 JobTitle: QA Technician ESSENTIALDUTIES AND RESPONSIBILITIES include the following. Other duties may beassigned. This position will cover various departments and shifts. Inspect products and monitor operating procedures at all phases of production run to ensure SOP's and GMP's are correctly followed Collect samples from required areas of the plant and transfer samples to the laboratory Verify internal temperatures of products Perform preoperational evaluation on all processing rooms, equipment and facilities to ensure SOP's are being followed Auditing incoming raw materials and outgoing products; i.e., check temperatures, packaging, label of product etc. Perform thermometer calibration according to SOP's Fill out paperwork: i.e., preoperational evaluation records, product information, operational evaluation record etc. Monitor production personnel to ensure employee hygiene practices are being followed correctly Verify the calibration of production instruments: i.e., metal detector and scales Quality Controls Safety Teamwork Other duties deemed necessary by management Prepare sample and incubation media for microbiological test Perform chemical analysis: i.e., APC, Listeria, Salmonella, Coliform, Yeast and Mold Verify QA paperwork: i.e., pre shipment review, product information, product formulation log, injection and tumble record, etc. Maintain cleanliness of laboratory. Dispose of chemical waste and retains sample as required. Record test results and fill out required paperwork: i.e., non-complaint product record Perform sensory evaluation of product including flavor, color, and microbiological test. Prepare and sent sample to outside laboratory for shelf life study, chemical, and microbiological test Prepare label including nutritional information, ingredient statement, and heating instruction for application of USDA approval Basic supervision of all of the above duties listed

The Quality Assurance Technician I supports AAON's commitment to delivering high-quality HVAC products by performing inspections, tests, and audits throughout the manufacturing process. This entry-level role ensures that components and finished units meet internal and external standards. The technician works closely with production teams to identify defects and recommend corrective actions. Attention to detail and a strong understanding of quality principles are essential. Primary Duties The Quality Assurance Technician I is responsible for executing quality control procedures and supporting continuous improvement efforts across production lines. Duties include: Primary duties may include, but are not limited to: · Conducting inspections of incoming materials, in-process components, and finished products to ensure compliance with specifications. · Documenting inspection results and maintaining accurate records in accordance with company standards. · Reporting non-conformances and assisting in root cause analysis and corrective action implementation. · Collaborating with production and engineering teams to resolve quality issues and improve processes. · Using measurement tools such as calipers, micrometers, and multimeters to verify product dimensions and performance. · Supporting internal audits and participating in quality training sessions. · Ensuring compliance with AAON's quality management system and applicable industrystandards. · Promoting a culture of quality and accountability on the production floor. Job Requirements Education and Experience Requirements: Requires a high school diploma or GED. Technical training or coursework in quality assurance, manufacturing, or HVAC systems is preferred. Knowledge, Skills, and Abilities: · Basic understanding of quality control principles and inspection techniques. · Familiarity with mechanical and electrical components used in HVAC systems. · Ability to read and interpret blueprints, schematics, and technical documents. · Strong attention to detail and organizational skills. · Effective communication and teamwork abilities. · Basic computer skills, including data entry and use of Microsoft Office, or any combination of education and experience, which would provide an equivalent background. Essential Mental and Physical Functions: This role requires consistent focus, precision, and the ability to work independently or as part of a team. Physical demands include standing for long periods, walking between workstations, and handling small tools and components. Key Functions: · Ability to identify defects and inconsistencies in products. · Manual dexterity for operating inspection tools and equipment. · Visual acuity for detailed inspections and reading technical documents. · Ability to lift up to 30 lbs occasionally and work in a fast-paced environment. Work Environment: The Quality Assurance Technician I works in a manufacturing setting with exposure to HVAC equipment, moderate noise levels, and varying temperatures. PPE is required in designated areas. The role may involve rotating shifts and occasional overtime based on production needs. Disclaimer: Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at a time with or without notice. This is not an exhaustive list of all functions that the employee may be required to perform, and the employee may be required to perform additional functions. The company reserves the right to revise this job description at any time. The employee must be able to perform the essential functions of the position satisfactorily. If requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a Petroleum Inspector to join our Caleb Brett team, on site, at our Corpus Christi facility. This is a fantastic opportunity to grow a versatile career in the Inspection and Testing business, with Intertek, a Global and Award-winning leader in the ATIC Industry! Intertek Caleb Brett provides specialized Cargo inspection and analytical assessment services to the oil and gas, chemical and other commodities markets. With a global network of laboratories, 24/7 availability, and more than 130 years of exceptional customer service, our customers receive independent inspection and testing with industry-leading customer service. Intertek / Caleb Brett is continually innovating and evolving to reduce risk for consumers, brands and organizations in every sector and industry around the world. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Our Purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Petroleum Inspector, a valued member of our Inspection team, is responsible for performing an array of measurement testing of clients' commodities and cargo and reporting those test results to management. Shift/Schedule: Rotating Shifts and Hours, including nights, weekends, holidays, and on-call hours Salary & Benefits Information In addition to competitive compensation packages, when working with Intertek you can expect benefits including medical, dental, vision, life, disability, 401(k) with company match, generous vacation / sick time (PTO), tuition reimbursement and more. What you'll do: Understand and adhere to Caleb Brett safety procedures. Able to perform by specified methodology the below duties in addition to completing the associated paperwork. Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, barges, and ships. Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges, and ships. Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges, and ships. Perform routine equipment calibrations, verification, and function checks. Verify and communicate the results obtained and to make the entries into the appropriate media. Provide on the job assistance and receive training from more experienced inspectors. To communicate and coordinate with terminal, transport, and Company personnel to promote smooth exercise of duties assigned. To monitor the availability of the supplies needed for the above processes, and to make any needs for such supplies known to the Dispatcher or Coordinator. To perform routine equipment calibration, verification, and function checks. To organize and coordinate jobs so that services are rendered, and reports and samples are submitted in a timely manner. To maintain work areas, records, and equipment in a clean, organized, and functional condition. To verify and communicate the results obtained and to make the entries into the appropriate media, whether print or electronic, required to ensure the validity and traceability of the information. This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: Ability to work varying shifts , hours, and on-call basis. Cannot have a fear of heights. Ability to climb ladders and stairs for shore tanks. Experience with Verifying and communicating results obtained and to make the entries into the appropriate media *Valid driver's license and reliable driving record (required) Ability to acquire and maintain a Transportation Worker Identification Credential (TWIC). Always Model Intertek's 10X Energies within the workplace, practicing business the right way. Be aware of and adhere to safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work. Must be detailed oriented and able to effectively prioritize and organize workload with efficient time management. Ability to travel as business needs dictate. Physical requirements to include Lifting, walking, standing, reaching, bending, stooping, climbing, squatting, and driving. Preferred Requirements & Qualifications: Experience with Volume measurement, temperature measurement and sampling of commodity materials contained or conveyed in lines, shore tanks, cars, tank trucks, barges, and ships. Experience with Visual inspections on lines, pumps, manifolds, shore tanks, rail cars, tank trucks, barges, and ships. Experience with Complete custody transfer surveys of commodities transferred to and from rail cars, tank trucks, shore tanks, barges, and ships. Experience with Performing routine equipment calibrations, verification, and function checks. IFIA certified is a plus!

The perks of working here We're committed to providing our employees with meaningful benefits and real opportunities. Good Benefits including: Medical Dental (with orthodontic) Disability Vision Life insurance 401K with company match Attendance Bonuses Merit Increases Paid Time Off (PTO) and Paid Holidays Growth opportunities in a stable and safe work environment Collaborative and positive team culture Responsibilities Revolution is hiring a Quality Assurance Technician for the night shift at its Kilgore, TX facility. This is a 12 hour rotating shift schedule from 7:00 pm - 7:00 am.This position will work closely with production lines to ensure the facility meets quality standards. • Inspect product to verify compliance with known specifications (all departments) • Correctly input data into computer system • Interpret test data as pass or fail • Handle quality issues with peers and departmental supervision during shift • Be proactive in addressing quality issues and provide feedback in a timely manner • Assure that raw materials are within tolerance • Write and place non-conforming material on hold • Perform Layered Process Audits throughout the plant • Perform measurement studies • Write/update Standard Operating Procedures (SOP's) • Find Continuous Improvement Ideas in the plant • Effectively communicate with department Managers, Supervisors and Leads Qualifications High School diploma 2 year college degree preferred 1 - 2 years of Quality experience in an industrial environment preferred. Necessary math skills - Addition, subtraction, and multiplication to record accurate reports. Must be able to read and write. Experience with automated manufacturing equipment preferred. Periodically lift and carry up to 30 lbs. Must be able to stand and walk for 8-12 hours. Ability to work 12-hour shifts. Must be able to read a tape measure Must be able to spot defects that could occur in each department Must be able to write neatly and legibly Must be able to distinguish between slight color variations Able to read, understand and verify all information on spec sheets. Must be detail-oriented and possess a pride of workmanship Demonstrate basic math skills Must have adequate computer skills…Word, Excel, PowerPoint Capable of working without supervision Capable of interaction with management and peers ABOUT REVOLUTION It's time to redefine possible. At Revolution, we exist to empower businesses and consumers to contribute to a better future through sustainable loop plastic solutions. Our unique, circular approach results in sustainable products and services that effectively meet the needs of businesses today, while helping prepare them for tomorrow. And we're just getting started. Learn more at revolutioncompany.com. Revolution welcomes diversity and is An Equal Opportunity/Affirmative Action Employer - Minority / Women / Disability / Veteran and other protected categories are always encouraged to apply. #operation #operator #recycling #plastics #manufacturing #reclaim #plantworker #production #extrusion #bags #plasticbags #xtrusion #bags #plasticbags PM20 We can recommend jobs specifically for you! Click here to get started.