Reliability engineer jobs in Boca Raton, FL - 117 jobs

*No C2C *Must be a US Citizen or Permanent Resident The GxP / Computer System Validation (CSV) Engineer is responsible for ensuring that computerized systems used in regulated environments comply with applicable GxP regulations (e.g., GMP, GCP, GLP) and industry standards. This role leads and supports validation activities throughout the system lifecycle, ensuring systems are fit for intended use and maintained in a validated state. Key Responsibilities Validation & Compliance Plan, execute, and document CSV activities in accordance with GxP regulations, FDA guidance, EMA guidelines, and industry standards (e.g., GAMP 5). Develop and review validation deliverables including: Validation Plans (VP) User Requirements Specifications (URS) Functional / Design Specifications (FS/DS) Risk Assessments IQ/OQ/PQ protocols and reports Traceability Matrices Ensure computerized systems remain in a validated state through effective change control, deviation management, and periodic review. System Lifecycle Support Support validation activities across the full system lifecycle (concept, implementation, operation, and retirement). Assess the impact of system changes, upgrades, patches, and configuration changes on validation status. Perform vendor assessments and support supplier audits as required. Quality & Audit Support Ensure compliance with data integrity principles (ALCOA+). Participate in internal audits, regulatory inspections, and customer audits. Respond to audit findings and support CAPA development and execution. Cross-Functional Collaboration Collaborate with IT, Quality Assurance, Engineering, Manufacturing, Clinical, and external vendors. Provide CSV guidance and training to stakeholders. Act as a subject matter expert for CSV and GxP computerized systems. Required Qualifications Bachelor's degree in Engineering, Computer Science, Life Sciences, or a related field. 3+ years of experience in GxP Computer System Validation in a regulated environment. Strong knowledge of: FDA 21 CFR Part 11 EU Annex 11 GAMP 5 Data Integrity principles Experience validating systems such as: ERP (e.g., SAP) LIMS, MES, QMS Clinical Trial Management Systems (CTMS) Laboratory or manufacturing equipment with software components Excellent documentation, analytical, and communication skills. Preferred Qualifications Experience with cloud-based and SaaS systems validation. Familiarity with Agile or SDLC methodologies in regulated environments. Experience supporting FDA, EMA, or other regulatory inspections. CSV certification or quality-related certifications (e.g., ASQ, ISPE).

We are the movers of the world and the makers of the future. We get up every day, roll up our sleeves and build a better world -- together. At Ford, we're all a part of something bigger than ourselves. Are you ready to change the way the world moves? In this position... Ford Motor Company seeks a highly skilled and experienced Reliability Hardware Process Specialist to join our team responsible for the reliability and environmental validation of in-house electronic modules for next-generation vehicles. This critical role will involve collaborating closely with design and test engineering teams across multiple electronic module projects. The successful candidate will play a key role in ensuring that our designs meet or exceed the highest reliability and quality standards, contributing significantly to the success of our future electronic architecture. This position offers a unique opportunity to contribute to the advancement of Ford's next-generation vehicle technology. We are seeking a highly motivated and results-oriented individual with a passion for reliability engineering and a commitment to delivering high-quality products. Hardware Reliability Engineer What you'll do... Provide Reliability Program Lab Coordination Support, including interfacing with Project Managers weekly, coordinating current active and triage efforts across Environmental Validation Labs Collaborate with cross-functional teams (design, test, manufacturing) throughout the product lifecycle to ensure robust reliability and quality. Support the development and execution of environmental and reliability validation processes, procedures and plans, ensuring compliance with both Ford and industry standards. Participate in design reviews, providing expert guidance on reliability best practices and potential failure modes. Contribute to the continuous improvement of hardware reliability processes and methodologies. Analyze reliability data, identify trends, and recommend corrective actions to enhance product performance and durability. Document and communicate technical findings clearly and effectively to both technical and non-technical audiences. Lead and execute hardware reliability analysis, including Design Failure Mode and Effects Analysis (DFMEA), Process Failure Mode and Effects Analysis (PFMEA), and Root Cause Corrective Action (RCCA). What you'll do... Provide Reliability Program Lab Coordination Support, including interfacing with Project Managers weekly, coordinating current active and triage efforts across Environmental Validation Labs Collaborate with cross-functional teams (design, test, manufacturing) throughout the product lifecycle to ensure robust reliability and quality. Support the development and execution of environmental and reliability validation processes, procedures and plans, ensuring compliance with both Ford and industry standards. Participate in design reviews, providing expert guidance on reliability best practices and potential failure modes. Contribute to the continuous improvement of hardware reliability processes and methodologies. Analyze reliability data, identify trends, and recommend corrective actions to enhance product performance and durability. Document and communicate technical findings clearly and effectively to both technical and non-technical audiences. Lead and execute hardware reliability analysis, including Design Failure Mode and Effects Analysis (DFMEA), Process Failure Mode and Effects Analysis (PFMEA), and Root Cause Corrective Action (RCCA).

AV is seeking a dynamic and skilled Digital Signal Processing (DSP) Engineer with FPGA experience to join our growing team in Sunrise, Florida. This is an exciting opportunity to work on advanced technologies that shape the future of defense and communications systems. As a key technical contributor, you'll develop innovative DSP architectures and algorithms, integrate solutions into real-time embedded systems, and serve as a Subject-Matter Expert (SME) across multiple platforms. Primary Responsibilities Include: Design, simulate, and implement moderate to complex digital signal processing modules using tools like MATLAB, Simulink, and VHDL/Verilog for FPGA platforms. Collaborate with cross-functional teams - including hardware engineers, software developers, and system architects - to develop and integrate DSP solutions. Receive and interpret technical instruction for defined project goals and collaborate on broader system designs. Participate in meetings and communications with customers and partners to support project requirements and ensure deliverables are aligned with expectations. Apply modern DSP techniques, algorithms, and methodologies to enhance existing architectures and develop cutting-edge solutions. Contribute to complex problem-solving through hands-on development and team brainstorming. Required Qualifications: Bachelor's Degree in Electrical Engineering (or related field) and 6+ years of prior relevant experience or Master's Degree and 4+ years of prior relevant experience. Ability to obtain and maintain a US Government Security Clearance. DSP Qualifications: Proficiency in Intermediate Digital Signal Processing Algorithms. Solid understanding of DSP concepts such as filtering, FFT, and sampling theory. Proficiency in Communications theory. Some Proficiency in programming languages preferably C or C++. FPGA Qualifications: Strong interest in FPGA development and low-resource digital design techniques. Experience with RTL design in VHDL simulation tools, and synthesis flows. Familiarity with FPGA platforms (e.g., Xilinx, Microchip) and embedded system development is a plus. Preferred Technical Competencies: Software Defined Radios Digital Signal Processing Theory Signal Processing Algorithms: e.g., Rate conversion, Correlation and Filtering C, C++ Programming: Object Oriented Design DSP Algorithms using MATLAB/Simulink: Develop and pick up MATLAB models for bit exact design verification; May use SIMULINK (system generator) as an interim step. DSP and FPGA Code Optimization Modem Design (SATCOM, wireless, Cellular & SDR) Physical Layers e.g. GSM, Wi-Max, Wi-Fi, Bluetooth Real Time Debugging Signal Impairments Testing, BER Testing: Modem Qualification experience. Design Documentation Performance Verification and Validation Software/Hardware implementation collaboration System Requirements Analysis TFS, GIT Revision Control Tools Clearance Level No Clearance The salary range for this role is: AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Get to Know Us Better Realtime technologies offers the most flexible cutting-edge Retail Management Solutions that encompass sales, inventory management, frontline employee management and engagement, payments, business intelligence, and digital automation tools for the wireless industry. We support Fortune 500 companies, unify their customer experience, and remove pain points across multiple retail touch points. Realtime prides itself on fostering a team-oriented culture and a dynamic work environment, where team members are set up to make meaningful contributions across the organization. Database Administrator - The Database Administrator will provide technical support for the development, implementation, and maintenance of an internal database. Maintains policies and procedures for ensuring database security and integrity. Implements data models, database designs, data access and table maintenance codes. Resolves database performance, capacity, replication, and distribution issues. Responsibilities: Install, update, and maintain SQL Server database software across multiple versions (2012-2022). Manage database performance by developing protocols, monitoring systems, and resolving processing and programming issues. Implement database security policies and disaster recovery (DR) procedures to ensure data integrity and accessibility. Support database migrations from on-premises to cloud environments, with a focus on Azure databases and SQL in cloud/Azure. Design, implement, and maintain highly available and performant SQL Server and MySQL database systems. Monitor database health, performance, and capacity using industry-standard tools and custom scripts. Automate routine database operations and deployments using Infrastructure as Code (IaC) and CI/CD pipelines. Upgrade SQL Server versions and optimize systems for performance and reliability. Create and optimize queries, stored procedures, and indexing strategies. Maintain and administer SSAS, SSIS, and SSRS solutions for reporting and analytics. Provide guidance and support to developers, including schema design, code review, and query tuning. Collaborate with DevOps to install, configure, and manage SQL Server instances and databases in hybrid environments. Design, deploy, and maintain SQL Server availability groups across data centers. Develop and maintain database standards, documentation, and failover runbooks. Automate database maintenance tasks and processes to improve efficiency. Be available for on-call support to address urgent database issues. Qualifications: Proven experience with SQL Server (2012-2022), Azure databases, and SQL on VMs. 3+ of Terraform/Ansible/Powershell experience Experience with Azure SQL, Azure Managed Instances, and on-prem SQL Server. Hands-on experience with disaster recovery (DR) solutions for SQL Server. Expertise in SSAS, SSIS, and SSRS, with exposure to Power BI preferred. Demonstrated ability to migrate on-premises databases to cloud environments, including Azure. Strong skills in updating SQL Server versions and implementing new database systems. Proficiency in SQL query language, query optimization, and troubleshooting. Strong experience with PowerShell scripting for automation and configuration management. Exposure to Infrastructure as Code (IaC) tools, such as Terraform, Ansible, or ARM templates. Advanced knowledge of database security, performance tuning, and backup/recovery standards. Familiarity with dimensional and relational data modeling concepts. Strong programming skills, including experience with PL/SQL coding. Experience with Unix and PowerShell scripting for database management tasks. Knowledge of emerging database technologies and the ability to recommend and implement solutions. Excellent problem-solving skills and attention to detail. Strong communication skills to collaborate effectively with technical and non-technical teams. Salary Range: $120,000- $170,000 Annually Our compensation structure considers various geographical markets within the United States. The base salary for this role reflects the typical expected earnings. However, the final compensation package will be determined by several factors, including your location, job-specific expertise, skills, experience, and other relevant job-related considerations. What We Offer: A unique opportunity to shape the journey of RT² Working within a rapidly growing, game-changing business Remote, flexible working options Competitive compensation Generous STI and LTI provisions Health, Dental and Vision Insurance Paid Annual Leave Paid Sick Leave 401K, and more Equal Opportunity Statement: Realtime is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

Must-Have * Strong development experience in .NET and Java frameworks. * Proven leadership managing SRE and DevOps teams. * Incident and problem management using ServiceNow. * Expertise in Observability: AppDynamics, PagerDuty, Grafana, Splunk. * Deep understanding of CI/CD with Azure ADO, GitHub, Maven, Gradle. * Automated regression and performance testing experience with Selenium, JMeter. * Experience building self-healing systems. * Strong skills in root cause analysis (RCA) and problem identification. * Ability to define and enforce SLAs and response metrics. * Document and maintain version-controlled knowledge repositories. * Exposure to self-healing systems in SRE or DevOps context. Good-to-Have * Certifications in AWS/GCP/Azure Salary Range-$100,000-$120,000 a year #LI-KR3 TCS Employee Benefits Summary: Discretionary Annual Incentive. Comprehensive Medical Coverage: Medical & Health, Dental & Vision, Disability Planning & Insurance, Pet Insurance Plans. Family Support: Maternal & Parental Leaves. Insurance Options: Auto & Home Insurance, Identity Theft Protection. Convenience & Professional Growth: Commuter Benefits & Certification & Training Reimbursement. Time Off: Vacation, Time Off, Sick Leave & Holidays. Legal & Financial Assistance: Legal Assistance, 401K Plan, Performance Bonus, College Fund, Student Loan Refinancing. Experience working in a Travel/Tourism industry

Job Title: Site Reliability Engineer Location: On -site - Fort Lauderdale, FL (Local candidates only) Job Type: Contract Experience Level: Mid -Level (5-8 years) Education Required: Bachelor's Degree Industry: Information Technology & Services Visa Sponsorship: Not Available Relocation Assistance: Not Available Overview: We're seeking a Site Reliability Engineer with strong Java skills and a background in incident management to join a high -performing team focused on stability, performance, and continuous improvement of enterprise systems. This is an on -site role for professionals who thrive in fast -paced, hands -on technical environments. Key Responsibilities: Serve as the first point of contact for high -severity incidents and emergency situations, ensuring swift resolution and stakeholder communication. Collaborate with cross -functional teams, including developers, product owners, and operations, to troubleshoot and resolve production issues. Drive root cause analysis (RCA) and recommend system/process improvements to reduce incident recurrence. Maintain transparency through structured, periodic updates to leadership and key stakeholders. Coordinate with various technical teams to ensure progress and accountability across the incident lifecycle. Contribute to ongoing operational support, managing and mitigating day -to -day technical issues. Requirements Technical Skills Required: 4+ years of hands -on experience with Java and open -source technologies. Solid understanding of incident management and root cause analysis practices. Experience with Agile methodologies. Familiarity with SAP S/4HANA, Enterprise Portfolio & Project Management, and R&D Engineering is a plus. Site Reliability Engineering experience preferred. Additional Requirements: Must be local to Fort Lauderdale, FL. Excellent communication and stakeholder management skills. Strong problem -solving mindset with an ability to design reliable, scalable solutions.

About GoodLeap:GoodLeap is a technology company delivering best-in-class financing and software products for sustainable solutions, from solar panels and batteries to energy-efficient HVAC, heat pumps, roofing, windows, and more. Over 1 million homeowners have benefited from our simple, fast, and frictionless technology that makes the adoption of these products more affordable, accessible, and easier to understand. Thousands of professionals deploying home efficiency and solar solutions rely on GoodLeap's proprietary, AI-powered applications and developer tools to drive more transparent customer communication, deeper business intelligence, and streamlined payment and operations. Our platform has led to more than $30 billion in financing for sustainable solutions since 2018. GoodLeap is also proud to support our award-winning nonprofit, GivePower, which is building and deploying life-saving water and clean electricity systems, changing the lives of more than 1.6 million people across Africa, Asia, and South America. Position SummaryWe are seeking an experienced Quality Engineer to join our fast-paced, agile development team. You will be responsible for ensuring the quality and reliability of our Salesforce based solutions through comprehensive testing strategies and collaboration with development teams. This role requires understanding of Salesforce platform capabilities and modern testing methodologies. Key Responsibilities Testing & Quality Assurance Design and execute comprehensive test plans for Salesforce applications, customizations, and integrations Perform functional, regression, integration, and performance testing across multiple Salesforce environments Test complex business processes involving Flows, custom Lightning components, and third-party integrations Validate data accuracy and integrity across system boundaries Ensure proper testing coverage for deployments using GitHub Actions CI/CD pipeline Test Automation Develop and maintain automated test suites using appropriate tools and frameworks Create reusable test scripts and data sets for efficient regression testing Implement continuous testing practices within our GitHub Actions CI/CD pipeline Collaborate with development teams to integrate testing early in the development lifecycle Salesforce Platform Expertise Test across multiple Salesforce clouds (Sales Cloud, Service Cloud, Financial Services Cloud) and environments (sandbox vs. production) Validate deployments and change management processes Test integrations with external systems through middleware platforms (MuleSoft Anypoint) Test data flows and integrations with AWS S3 and Salesforce Data Cloud Understand and test modern Salesforce features including automation tools Ensure compliance with Salesforce best practices and governor limits Collaboration & Communication Work closely with developers, business analysts, and product owners in agile sprints Participate in sprint planning, daily standups, and retrospectives Document test cases, results, and defects clearly and thoroughly Leverage Salesforce Event Logs for testing validation and issue troubleshooting Communicate testing progress and quality metrics to stakeholders Required Qualifications Experience 5+ years of software quality engineering experience 2+ years of hands-on Salesforce testing experience Strong background in agile/scrum development methodologies Experience with test automation tools and frameworks Proven track record of testing complex enterprise applications Technical Skills Deep understanding of Salesforce platform architecture and capabilities Experience testing Salesforce customizations (Apex, Lightning Components, Flows) Knowledge of Salesforce deployment processes and environment management Experience testing integrations with middleware platforms Proficiency in SOQL and data validation techniques Familiarity with API testing and integration validation Experience with version control systems (Git) and CI/CD pipelines (GitHub Actions) Soft Skills Strong analytical and problem-solving abilities Excellent written and verbal communication skills Ability to work effectively in fast-paced, agile environments Detail-oriented with strong organizational skills Adaptable and quick to learn new technologies and processes Continuous learning mindset to stay current with platform updates Preferred Qualifications Certifications & Training Salesforce Administrator or Platform App Builder certification Additional Salesforce certifications (Advanced Administrator, Platform Developer I) Quality engineering certifications Additional Experience Experience with test automation tools and frameworks Experience with MuleSoft Anypoint Platform Experience with AWS S3 integrations Knowledge of Salesforce Data Cloud Performance testing experience with enterprise applications Experience with Salesforce Event Logs analysis Additional Information Regarding Job Duties and s: Job duties include additional responsibilities as assigned by one's supervisor or other managers related to the position/department. This job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and other skills required for the position. The Company reserves the right at any time with or without notice to alter or change job responsibilities, reassign or transfer job position or assign additional job responsibilities, subject to applicable law. The Company shall provide reasonable accommodations of known disabilities to enable a qualified applicant or employee to apply for employment, perform the essential functions of the job, or enjoy the benefits and privileges of employment as required by the law. If you are an extraordinary professional who thrives in a collaborative work culture and values a rewarding career, then we want to work with you! Apply today! We are committed to protecting your privacy. To learn more about how we collect, use, and safeguard your personal information during the application process, please review our Employment Privacy Policy and Recruiting Policy on AI.

SummaryAre you ready to see your career take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. The Advanced Lead - SiC/GaN Power Module Packaging Engineer will focus on the design of power modules along with development, optimization, and implementation of manufacturing processes for both GaN and SiC power modules. These advanced semiconductor power modules are critical for high-efficiency high power density power electronics. In this role, you will be responsible for developing, optimizing, and implementing manufacturing processes for existing and new Gallium Nitride (GaN) and Silicon Carbide (SiC) power modules. You will participate in power module design and simulation analyses, and will work closely with mechanical designers, quality, and production teams to ensure the efficient and reliable production of high-performance GaN and SiC power modules. In addition, you will be involved in troubleshooting, process improvement, and ensuring compliance with industry standards and safety regulations. GE Aerospace, based in Pompano Beach, is a global powerhouse in the aviation industry, specializing in cutting-edge aircraft engines, systems, and avionics. The Advanced Technology Organization is responsible for driving growth through technology by researching customer needs both met and unmet, then finding solutions. Our team supports both military and commercial customers in land, sea, and air domains.Job Description Role & Responsibilities Power Module Design and Simulation Collaborate with power module design team, provide insight on the developed module performance using simulation tools. Collaborate with design and R&D teams to ensure manufacturability and scalability of new GaN and SiC power module designs. Process Development Develop and optimize manufacturing processes for GaN and SiC power modules, including die attach, wire bonding, encapsulation, and testing. Process Optimization Identify and implement process improvements to enhance yield, efficiency, and reliability of GaN and SiC power module production. Utilize statistical process control (SPC) and other quality tools to monitor and improve process performance. Quality Control Develop and implement quality control procedures to ensure compliance with industry standards and customer requirements. Conduct root cause analysis and implement corrective actions to address process-related quality issues. Documentation and Reporting Guide the team to maintain detailed process documentation, including process flow diagrams, work instructions, and standard operating procedures (SOPs). Prepare technical reports and presentations to communicate process development and improvement activities. Training and Support Train production staff on new processes and equipment. Provide technical support to production teams to resolve process-related issues. Safety and Compliance Ensure all manufacturing processes comply with safety regulations and company policies. Participate in regular safety audits and risk assessments to identify and mitigate potential hazards. Required Qualifications Master's degree or higher in Electrical Engineering, Materials Science, Chemical Engineering, or a related field. Minimum of 3 years of experience in semiconductor manufacturing with a focus on power module packaging. Additional Information GE Aerospace will not sponsor individuals for employment visas, now or in the future, for this job opening Ability and willingness to sit onsite at our Pompano Beach, FL facility location. Desired Qualifications PhD degree in Electrical Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, or a related field. Experience with GaN and SiC power module manufacturing and packaging technologies. Familiarity with industry standards and regulations related to power electronics. Strong knowledge of semiconductor fabrication processes, materials, and equipment. Excellent problem-solving and analytical skills. Strong communication and interpersonal skills. Ability to work collaboratively in a cross-functional team environment. Some of our competitive benefits package includes: Medical, dental, and vision insurance that begins on the first day of employment Permissive time off policy for newly hired employees Generous 401(k) plan Tuition Reimbursement Life insurance and disability coverage And more! The base pay range for this position is $112,000-150,000. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 03/01/2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Gaumard is looking for amazing talent to join the team! Is that you? The Packaging Engineer position requires a self-starter who will design and develop custom packaging and contribute towards the establishment of the in-house manufacture of packaging from the ground up, including packaging, process, mold, and equipment design and implementation. The position entails developing custom designs to create functional, highly cost-effective packaging concepts that protect the goods and further develop our green initiative. The Packaging Engineer will create strategies for protection of products, test and implement appropriate packaging. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be available to enable individuals with disabilities to perform the essential functions. SUPERVISION RECEIVED AND EXERCISED: The Packaging Engineer will work collaboratively with personnel from all departments, including Manufacturing Engineering, Engineering, Purchasing, and Production. DUTIES AND RESPONSIBILITIES: Analyze all existing products and develop and execute proposals for new packaging design and implementation Collaborate with various teams (Engineering, Manufacturing Engineering, Production) to develop the packaging. Create innovative packaging designs, cartons and thermoformed packaging; and standardize all categories of the product packaging, assembly, and documentation processes. Prepare all documents that are necessary to comply with all regulations. Provide technical support to manufacturing teams Research, procure, and implement capital equipment as necessary - to be approved by executive management. Develop, test, and implement manufacturing processes Provide support and problem resolution to manufacturing lines as needed Other duties as assigned QUALIFICATIONS: Bachelor's degree in engineering or related field 7+ years of relevant experience Must be Bilingual Drafting and engineering experience required Strong knowledge of SolidWorks and AutoCAD or similar, with 3+ years of experience Proficient in Microsoft Office products, i.e. (Outlook, Excel, Word, Project, Visio etc.) Practical, hands-on approach to problem-solving. Excellent organizational skills with strong attention to detail and accuracy Ability to take the initiative and self-manage on high-impact projects Excellent project coordination and prioritization skills Goal-oriented with the ability to complete tasks in a timely manner Knowledge of vacuum-forming techniques Knowledge of injection-molding techniques Knowledge of packaging performance test methods Knowledge of general design engineering and DFMA principles, component manufacturing processes, tooling methodologies, material properties. Experience with custom packaging design and implementation Ability to adapt to shifting priorities and work adeptly in a fast-paced environment. All candidates must possess excellent verbal and written communication skills, strong decision-making and problem-solving skills, and outstanding interpersonal relationship and people skills. Able to work as part of a team and as an independent contributor Experience with process implementation from the ground-up a plus PHYSICAL/MENTAL REQUIREMENTS: Ability to communicate (read and write) effectively in a business environment. Ability to follow procedures and instructions. Ability to sit at a desk for long periods to assemble documentation and record data. Ability to walk the facilities to collect necessary data. Ability to lift, pull, push, and carry objects and supplies (up to 20lbs). While performing these job duties, the employee is regularly required to sit and use his/her fingers. The employee frequently is required to talk and/or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Ability to exercise independent judgment in determining how to conduct assigned tasks. WHAT YOU'LL GET WHEN YOU JOIN THE GAUMARD FAMILY: Competitive Pay. Full health benefits (medical, vision, dental). Paid Time Off (PTO). 11 Paid Holidays. Retirement plan with 100% employer match up to 5% of employee's contribution. Satisfaction knowing that you have joined a long-standing company. Hours: Monday to Friday 8:00 AM to 4:30 PM must be willing and able to work some Saturdays or stay beyond scheduled shift if needed to meet business demands. The above supersedes all previous descriptions. This job description is intended to be a tool to describe the primary purpose of the job and the KEY duties and responsibilities. This description does not state or imply that the functions listed above are the only tasks to be performed by the employee occupying this position. Management has the right to add to or change the job responsibilities at any time. Equal Employment Opportunity Statement: Gaumard Scientific is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Gaumard Scientific is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Gaumard Scientific are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Gaumard Scientific will not tolerate discrimination or harassment based on any of these characteristics. Gaumard Scientific encourages applicants of all ages. Gaumard Scientific will provide reasonable accommodation to employees who have protected disabilities consistent with local law.

Job purpose The Process Engineer I is responsible for evaluating and improving manufacturing processes to reduce cost, improve yields, and reduce variation. This position performs new process design and implementation, process validations and process qualifications. Process Engineers also participate in technology transfer to ensure the processes necessary for new products are effectively translated to manufacturing from R&D. Process Engineer I makes use of statistical analysis methods, critical thinking, process development, and scaling principles to achieve the objectives mentioned above. Duties and responsibilities Plan and execute process optimization, equipment qualification, and process validation or process qualification projects. Use LEAN Manufacturing principles to analyze processes and make recommendations for improvements. Lead and perform equipment qualifications, process validations or process qualifications, including writing of protocols and reports. Lead efforts to solve problems using formal problem resolution techniques and root cause analysis. Create, communicate, and follow project plans with detailed tasks and timelines necessary for project completion. Communicate to management of performance against plan. Identify and resolve insufficiencies in routine manufacturing and provide constant support to manufacturing team. Develop standard operating procedures (SOPs) for newly designed or optimized processes, while ensuring compliance with safety and quality standards. Assess processes, take measurements, and interpret data. Develop and monitor process and equipment metrics to use for optimization analysis. Comply with FDA and AATB tissue banking standards. Other duties as assigned. Requirements Qualifications Qualifications include: BS in Biomedical, Mechanical or Industrial Engineering or other applicable engineering discipline. Advanced degree (Master's) a plus. 1-3 years of experience in Tissue Banking, Device, Biologics, or Pharmaceutical industry in a relevant engineering role preferred. Strong analytical, planning, project management, critical thinking, troubleshooting, clear communication, and problem-solving skills. Ability to effectively communicate with multidisciplinary teams. Excellent technical skills and writing. Strong knowledge of LEAN manufacturing principles preferred. Working knowledge of 21 CFR 1271 regulations and AATB guidelines preferred. Proficient in project planning software. Microsoft Project preferred. CTBS certified (or certified within two years of employment). Strong work ethics. Working conditions Job requires working in office. Must be willing to work weekends and evening hours as necessary. Must be willing to accommodate travel if necessary. The job may require work to be performed inside the controlled clean room processing area where the engineer would be exposed to tissue processing. Physical requirements The job may entail the occasional requirement to stand for extended periods of time and lifting heavy objects of up to 30 lbs. and do repetitive tasks with few breaks while executing engineering plans. Direct reports No direct reports

Job Description Role Summary/Purpose: The Process Engineer - Plasma Spray & HVOF will provide specialized expertise in thermal spray coating processes, focusing on Plasma Spray and High-Velocity Oxygen Fuel (HVOF) applications. This role is integral to supporting aerospace manufacturing operations, ensuring adherence to OEM standards, and driving continuous improvement initiatives. The engineer will collaborate closely with cross-functional teams to optimize coating processes, enhance product quality, and maintain compliance with industry regulations. Essential Responsibilities: Lead the development, implementation, and optimization of Plasma Spray and HVOF coating processes to meet product specifications and quality standards. Provide technical support to manufacturing teams, addressing process-related issues and implementing corrective actions as necessary. Create and maintain detailed work instructions, process flows, and technical documentation in compliance with aerospace industry standards. Ensure all processes align with OEM specifications and regulatory requirements. Conduct thorough root cause analysis for process deviations, quality issues, and failures. Develop and implement corrective and preventive actions to mitigate recurrence. Apply lean manufacturing principles to streamline processes, reduce waste, and improve efficiency. Lead or participate in continuous improvement initiatives, utilizing tools such as Six Sigma, 5S, and Kaizen. Provide training and mentorship to team members on Plasma Spray and HVOF processes, equipment, and safety protocols. Foster a culture of knowledge sharing and collaboration within the team. Work closely with cross-functional teams, including design, quality, and production, to ensure seamless integration of coating processes into manufacturing workflows. Communicate effectively with stakeholders to report on process performance, improvements, and challenges. Qualifications: Bachelor's degree in Chemical, Materials, Mechanical Engineering, or a related field or certification 3-5 years of hands-on experience with Plasma Spray and HVOF coating processes, preferably in aerospace manufacturing. Equivalent combinations of relevant education and work experience will also be considered in lieu of stated requirements Experience in creating and managing technical documentation and work instructions. Strong understanding of thermal spray coating technologies, materials science, and surface preparation techniques. Proficiency in CAD software (e.g., SolidWorks) for process design and simulation. Familiarity with aerospace industry standards, OEM specifications, and regulatory requirements. Experience in Maintenance, Repair, and Overhaul (MRO) environments is desirable. Demonstrated ability to perform root cause analysis and implement effective corrective actions. Strong analytical skills with attention to detail. Knowledge of lean manufacturing principles and experience in applying them to improve process efficiency. Ability to work collaboratively in a team environment, sharing knowledge and supporting team objectives. Physical Demands / Work Environment: The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently required to sit, stand, regularly use full range of motion of upper and lower extremities, regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Exposure to chemicals, noise, varying temperatures, and other workplace hazards however, PTI has established process, procedures, and protective equipment to reduce or eliminate exposures to these hazards and full compliance is a requirement of the job. About Us Propulsion Technologies International, LLC (PTI), a joint venture between GE Aviation & Safran Aircraft Engines, offers a great work environment with fast-paced, challenging and rewarding careers. Both GE & Safran are world leaders in the design and manufacture of aircraft engines, propulsion systems, & aircraft equipment. This could be your opportunity to join the exciting aviation industry! We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. PTI will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen.

Description Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high-performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment. Mini-Circuits' sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive website. Position Summary: Supports the development of process technologies and the acquisition, development and qualification of manufacturing equipment for the realization of new products and support of the existing products during the life cycle. Supports the development of continuous improvement processes and oversees the development an implementation of manufacturing processes to achieve operational excellence. Salary Range: $75,000-$100,000 per year Job Functions: Set up new production lines; study and recommend improvements to existing processes; evaluate equipment to be used in manufacturing processes & ensure documentation is completed for qualification of newly required equipment. Oversee the development of precision, robust assembly fixtures and tooling for new product assembly for the prototype and production phase. Lead and actively participate in design review meetings. Work to continuously improve processes both on the production floor as well as transactional by collaborating with various departments. Work to improve safety, quality, and productivity using ergonomics, time studies, procedural analysis, product design/redesign, and specification of tooling, fixturing, controls and mechanization/automation. Assist in identifying opportunities for process improvement, waste removal, and cost reduction. Partner with outside departments on improvements to production output and troubleshoot/solve problems using RCA. Review new models being introduced (NPI) for manufacturability and monitor pilot runs. Identify and develop requirements for processes for manufacturing new products and provide training. Review and validate qualification plans, documentation, and new processes. Monitor the implementation of solutions to achieve objectives and expected benefits. Create, review and revise CPs created within the department, as necessary. Ensure that ECNs are submitted for corrections and/or improvements. Present KPIs and create presentations for leadership, as required. Stay current on industry trends, technologies, and best practices to drive innovation and optimization. Ensures issues are addressed at the root cause level and implemented on all similar products and processes. Ensures optimum utilization of equipment and space by coordinating the layout of production areas. Facilitate the implementation of lean principles and continuous improvement events. Apply design of experiments techniques and establish standards and procedures to resolve problems. The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. Qualifications: Bachelor's degree in engineering (or similar field) with a manufacturing process background. Two to five years of experience in electronics (electromechanical) manufacturing, mechanical engineering, mechanical design, manufacturing engineering or related field, working with the design, integration, and manufacturing of RF and Microwave electronic components and assemblies.Experience in semiconductor assembly and packaging. Experience with mechanical reliability testing and related equipment. In-depth knowledge of available assembly processes/technologies such as surface mount, high frequency assemblies, die and wire attach, encapsulation. Knowledge of industry standards, PCB technologies, plating processes, adhesive/encapsulant material and solder materials. In-depth knowledge of statistical process control and problem-solving techniques. Extensive knowledge of manufacturing problem-solving methods. Must be a curious and inquisitive self-starter who will take the initiative to conduct research, learn from colleagues and grow within the field. Strong team player with the ability to work effectively in a dynamic, international cross-functional team environment. Proven record of creativity and innovation. Exceptional interpersonal, oral and written communication skills with an ability to communicate project status and issues clearly to team members. Critical thinking and demonstrated ability to turn question/request to answer/solution in a comprehensive way. Detail oriented, thorough and extremely well organized with demonstrated follow-thru in performing tasks. Ability to manage multiple project workloads, meet deadlines and deliver on-time results, act with urgency, take ownership and be accountable. Working knowledge of AutoCAD and Solidworks, Proficient in Microsoft Office Suite and the use of the department database programs, such as A/S400, Arena, etc. Physical Demands:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Cultural Focus: Displays enthusiasm and Passion for their work. Works to the standard of Uncompromising Quality by meeting or exceeding stated objectives and embracing continuous improvement. Exercises sound Business Judgement, ensuring that efforts are on track with the Company's goals. Operates with the mindset of Customer Obsession - by meeting or exceeding expectations to both internal and external customers. Takes Accountability by taking ownership and accepting responsibility for their conduct and contributions. Demonstrates a strong sense of urgency and accomplishes tasks with Speed and attention to detail. Cooperates, collaborates and contributes to shared goals with a strong sense of Teamwork. Conducts themselves with Honesty & Integrity and treats all members with Trust & Respect. Benefits: We offer a comprehensive package of benefits including [paid time off, medical/dental/vision insurance and 401(k)] to eligible employees. Comprehensive Medica, Dental and Vision Plans 401k and Profit -Sharing Programs Disability Insurance Life Insurance Employer-Sponsored Wellness Plans Commuter Benefits Hospital & Accident Indemnity Insurance Employee Benefit Advocate &Employee Assistance Program Additional Requirements/Skills: Comply, understand, and support corporate safety initiatives to ensure a safe work environment. Ability and willingness to abide by Company's Code of Conduct. May require some travel, overnight as necessary. Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law.

Who is Costa Farms? We're one of the world's largest horticultural growers-but without an ego to match our acreage. Our headquarters are in Miami, Florida, where we were founded in 1961. Costa Farms started on just 30 acres, and over the last 60 years, we've grown to more than 5,000 acres around the world. We have farms in North and South Carolina, Central and South Florida, and the Dominican Republic, plus an office in China. Costa Farms now employs nearly 6,000 people: engineers, marketers, accountants/analysts, human resources professionals, and of course, growers and plant scientists! Here at Costa Farms, we live by the values of H3: being Humble, staying Hungry, and always Hustling. The team rallies to the mission of being a lean, green, growing machine dedicated to enriching the world by bringing plants into everyone's life. True to that mission, we grow more than 1,500 plant varieties. Driven by the spirit of innovation, the team is always testing new plants and developing new solutions to make it easier for retailers and plant parents to enjoy plants. We're also continuously testing different ways of growing our plants to increase quality and improve their ecological footprint as one aspect of our many sustainability efforts. We cultivate plants, as well as a winning culture. Join the team, and you'll find opportunities to learn and grow. You'll collaborate with other driven, determined people who together keep Costa Farms an industry leader. You'll support and be supported by a team that cares about each other, our customers, our consumers, and our community. You'll also find right away that Costa Farms is committed to providing a diverse environment. We're proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetic information, disability, age, military status, marital status or veteran status, or any other group status protected by federal, state, or local law. DESCRIPTION: The Process Engineer is responsible for leading the optimization and implementation of projects designed to increase productivity and effectiveness. The successful candidate will be able to enhance business processes to maintain efficiency, reduce costs, enhance sustainability, and maximize profitability. Developing best practices and fostering sustainable cultural change. This position will be exposed to all areas of our business and manufacturing operations. Requirements RESPONSIBILITIES: Optimize and document manufacturing processes through the entire supply chain. These business processes include procurement to payables, production operations, inventory management, and shipping Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs, and changeovers. Interact with supervisors and workers to explore initiatives, ideas, and order progress. Develop innovative solutions. Research and purchase new manufacturing technology. Prepare samples for study. Improve process capability and production volume while maintaining and improving quality standards. Develop best practices to deliver process documentation using appropriate tools (web apps, apps, MS Tools, or through integration with ERP, etc.) Ensure that process documentation is user-friendly and accessible in English and Spanish. Support shipping operations on/off-season to ensure order completion Evaluate and improve processes in manufacturing systems. Develop and implement systems that optimize all phases of the production process. Work with equipment designers and manufacturing officers to develop a cost-effective and working production process. Ensure projects are completed on time. Ensure financial budgets are followed. Collect, record, and transcribe data. Work with the compliance team to ensure business processes are being adhered to. Manage cost and time constraints Perform risk assessments Additional Responsibilities Availability for flexible schedule changes based on business needs (including but not limited to seasonal demand and additional hours outside of the regular work schedule). Collaborate with cross-functional teams to gather information or help as required. Perform additional duties as required. QUALIFICATIONS: Bachelor's degree in engineering with a specialization in Industrial or Mechanical Engineering or equivalent experience. Experience in process improvement and project management is a plus. Strong understanding of manufacturing methods /procedures/ quality. Proficient in Microsoft Office Suite. (Excel, Visio, Power BI) Experience in process simulation Working knowledge of process engineering software packages Ability to present technical information using CAD, CAD/CAM Circuit Design Bilingual (English - Spanish) is a plus. Excellent written and verbal communication skills, with the ability to present complex data to diverse audiences. Physical Demands Exerting up to 20 pounds of force frequently and/or 50 pounds of force occasionally to lift, carry, push, pull, or otherwise move objects, Bending, reaching, stretching, standing, & walking in various settings or environments. Work Environment: The role involves utilizing standard office equipment, such as computers, monitors, keyboards, mice, telephones, and other essential digital tools required for daily tasks. Must be able to work in and around various settings, including office and outdoor agricultural facilities. Indoor duties may involve using computers and standard office equipment. Outdoor duties include work outdoors in fluctuating weather conditions, including exposure to sunlight, rain, wind, and temperature changes (hot, cold, rainy, windy). Tasks often involve manual labor or physical effort. The position also requires direct contact with various plants, soil, and shipping materials and exposure to various dust, noise, and weather conditions. SKILLS: Excellent communication and interpersonal skills with the ability to effectively communicate complex information to employees. Demonstrated ability to work well in a team-oriented environment. Superior organizational, self-motivation and problem-solving skills Ability to maintain confidentiality and handle sensitive information with discretion. Strong analytical and critical thinking abilities. Capable of identifying problems, evaluating options, and implementing practical solutions. Effective time management skills to complete tasks within deadlines and maintain productivity. Ability to work independently as well as collaboratively within a team environment. Ability to troubleshoot and resolve issues efficiently. Flexibility to adapt to changing priorities and work schedules as needed. COMPETENCIES: Action Oriented Collaborates Tech Savvy Cultivate Innovation All applicants must be work-authorized. Costa Farms will not sponsor any visa for this position. After applying, follow us on LinkedIn to stay up to date on what's happening around Costa Farms and to start becoming part of our family. Come Grow with Us™! Costa Farms offers competitive wages and benefits, including: 401(k) Plan Company 401(k) Matching Contributions Health Savings Account, Flexible Spending Account, and Dependent Care Telemedicine/ Mental Health Services Health Insurance Dental Insurance Vision Insurance Pet Insurance Supplemental Insurance (Aflac) Growth Opportunities Challenging and exciting work environment Costa Farms Scholarship Employee discounts on plants Costa Farms headquarters also has: On-site gym with showers Subsidized on-site cafeteria, a quiet room, and indoor games Love Where You Work activities throughout the year This organization participates in E-Verify

At ReturnPro, we are revolutionizing the way returns and refurbishments are handled. With decades of experience in reverse logistics and refurbishment, we have evolved into a mission-driven company dedicated to sustainability, innovation, and zero waste. Our expertise spans a wide range of product categories, including tools, electronics, appliances, and more, with the goal of repairing and repurposing every item we receive. As a leader in the refurbishment industry, ReturnPro is committed to creating scalable systems that maximize economic value while prioritizing environmental responsibility. Our mission is to redefine the lifecycle of returned products, transforming waste into opportunity and fostering a sustainable future. We are seeking a Process Improvement Engineer to join our growing team at our Miami, Florida headquarters or Dallas/Fort Worth and lead the charge in optimizing repair processes, training teams, and achieving our zero-waste vision. Repair Process Development: * Design, implement, and optimize scalable repair systems for a wide range of products (tools, electronics, appliances, etc.), ensuring items can be refurbished effectively and returned to the market. * Create comprehensive workflows that streamline repair tasks from intake to quality control. * Develop innovative repair techniques for items of varying complexity, focusing on efficiency, durability, and cost-effectiveness. Cost-Benefit Analysis: * Conduct detailed economic feasibility studies for repairs, ensuring that processes maximize profitability while maintaining quality and sustainability standards. * Continuously analyze the ROI of repair operations and identify areas for improvement. Documentation and Training Systems: * Develop clear, user-friendly documentation, standard operating procedures (SOPs), and training materials to guide team members with minimal prior experience. * Build and maintain an organizational structure that empowers teams to perform repairs independently and effectively. Sustainability Advocacy: * Champion ReturnPro' s mission of zero waste by driving repair-first practices and reducing the need for replacements. * Integrate sustainable principles, such as lifecycle assessments and material reuse, into all aspects of the repair process. Technical Leadership: * Provide expertise in material science, failure analysis, and repair techniques across multiple categories of products. * Leverage advanced tools like CAD software, automation systems, and data analytics to enhance process efficiency and innovation. * Drive the integration of technology, including robotics and custom tools, to improve precision and reduce turnaround time. Collaboration and Problem-Solving: * Partner with cross-functional teams to identify bottlenecks in repair operations and implement solutions. * Act as a mentor and trainer to team members, fostering a collaborative and innovative culture.

Lead the Future of Wastewater Treatment at a Premier Solutions Provider Compensation: Competitive $150,000 to $200,000 base salary + bonus + benefits including health, dental, vision and 401(k) Remote: This is a remote position with a mixture of daily or weekly travel to jobsites across the continental US. 360 Talent Avenue is partnering with a premier wastewater solutions company to hire a Process Engineer (Wastewater). This is a high-impact, technical role reporting to the Executive Vice President. The Process Engineer (Wastewater) demonstrates highly skilled hands-on experience and industry knowledge as part of a solutions focused team serving some of the most dynamic industries and clients in the country. This role is responsible for supporting system installations, startups, repairs, and maintenance of the wastewater treatment chemistry and equipment. This role will troubleshoot and solve complex problems, communicate to technical audiences, and recommend operational improvements. The Process Engineer (Wastewater) acts as a liaison between the team and client supporting client confidence and business expansion. Why You'll Love This Role: Technical Impact - Apply your expertise in wastewater chemistry and equipment to solve real-world challenges, improve efficiency, and drive measurable results. Client-Centric Focus - Partner with leading organizations across some of the most dynamic industries in the country, delivering solutions that ensure compliance, minimize costs, and maximize treatment performance. Solutions-Driven Team - Join a highly skilled, collaborative group that thrives on innovation and problem-solving. Growth & Flexibility - Benefit from remote work with travel, ongoing technical training, and clear opportunities for career advancement. Competitive Rewards - Earn a strong base salary plus eligibility for annual bonus. Comprehensive Benefits - Access health, dental, vision, retirement plans, and travel mileage reimbursement. Key Responsibilities Leverage knowledge of coagulants, polymers, and wastewater specialty chemicals to troubleshoot and provide field support for chemical treatment programs, equipment, and processes at industrial wastewater treatment plants. Maintain composure and professionalism while demonstrating urgency addressing complex situations, ensuring effective problem-solving and client confidence. Support site readiness preparation, and startup and ongoing monitoring. Prepare technical reports, recommendations and communicate verbally and in writing complex information to technical audiences of varying levels of expertise. Follow industry standards and best practices while remaining current in new technologies. Act as a liaison between the team and client supporting client confidence and business expansion. A Day in the Life Work at client site to evaluate wastewater treatment chemistry and processes. Communicate with the wastewater treatment team including Operators, Mechanic, and/or Lab Tech in addition to clients to better understand the issue. Evaluate data and use knowledge and skills to provide a best practice recommendation. Create a report documenting results. Continue to monitor and evaluate performance and recommend any follow up changes. What You Bring 5-7 years of technical service experience in industrial wastewater treatment including deep knowledge of specialty chemicals. Bachelor's degree in Chemistry, Environmental Science, Engineering, or related field preferred; equivalent industry experience considered. Experience with Dissolved Air Floatation Systems, Belt press, Centrifuge, clarification systems, Biological treatment both aerobic and anaerobic systems. Ability to build strong relationships across the team and client to gather information, collaborate on solutions, and provide recommendations. Strong problem-solving skills and ability to work independently and with a team at client sites. Excellent written and verbal communication skills with the ability to effectively translate complex information across audiences with varying levels of expertise. Proficiency in Microsoft Office and comfort with data tracking and analysis with demonstrated ability to produce professional service reports. Valid driver's license and willingness to travel regularly to customer facilities. Ability to lift up to 50 lbs and work in varying plant and weather conditions. Comfortable working in industrial environments and using appropriate PPE. All applicants must be able to complete pre-employment onboarding requirements which may include any/all of the following: background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. 360 Talent Avenue is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran, status or any other basis covered by appropriate law. All employment decisions are based on qualifications, merit, and business needs.

RAS LaVrar is a rapidly expanding creditors' rights law firm servicing some of the largest financial institutions in the country. Our offices, home to hundreds of employees across seven states, work diligently to ensure our interests are in constant alignment with those of our clients. Our firm maintains a collegial work environment with opportunities for training and professional development. This is a high-volume and fast-paced practice that prides itself on efficiency and innovation. POSITION SUMMARY Process Engineers at RAS LaVrar work closely with Software Developers to streamline and standardize the firm's processes. Process Engineers are involved in the design, construction, and implementation of all aspects of the firm's processes. As such, Process Engineers are expected to develop an understanding of the firm's processes that extends beyond the programming details to include integration with non-technical elements. Responsibilities and Duties: The following responsibilities are central to the role: Craft processes Build roadmaps which include automations and applications to be developed by software developers as well as procedures to be executed by staff. Learn the firm's case management system (CMS) and construct automated process flows using the user interface therein. Develop an understanding of firm processes Build and maintain process documentation. Ascertain the purpose of firm processes in addition to their functionality. Data Engineering Build & maintain data pipelines. Construct queries using programming languages such as SQL & Python. Core Competencies & Required Skills: Candidates who succeed in this position typically: Are results-oriented. Pay close attention to detail. Display comfort and sensibility when working in a high-volume, fast-paced environment. Beat deadlines. Exhibit time-management skills/ability to work on multiple projects simultaneously. Take pride in the ability to work independently and problem solve. Demonstrate excellent verbal and written communication skills, including phone and email etiquette. Possess foundational computer knowledge and skills including familiarity with programs within the Microsoft Office Suite as well as programming languages such as SQL, Python. Educational/Experience Qualification: Bachelor's Degree or higher preferred. Individuals who excel in this role typically have academic backgrounds in operations management, engineering, and/or data science. Working Conditions: Onsite Position - Plantation, Florida Operates no tools, machines or equipment No significant lifting Benefits: Paid time off Paid holidays 401K Plan Medical, dental, vision and supplemental health insurance plans Voluntary life insurance plan Work Environment Mondays to Fridays Office Located in Plantation, FL Position: On site role Shift options to choose from 8:00 am to 5:00 pm 8:30 am to 5:30 pm 9:00 am to 6:00 pm RAS is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to race, color, age, national origin, religion, marital status, sex, sexual orientation, gender identity, gender expression, genetics, disability, protected veteran status or any other basis prohibited by law. We are committed to a diverse and inclusive workplace.

AV is seeking a dynamic and skilled **Digital Signal Processing (DSP) Engineer** with FPGA experience to join our growing team in Sunrise, Florida. This is an exciting opportunity to work on advanced technologies that shape the future of defense and communications systems. As a key technical contributor, you'll develop innovative DSP architectures and algorithms, integrate solutions into real-time embedded systems, and serve as a Subject-Matter Expert (SME) across multiple platforms. **Primary Responsibilities Include:** + Design, simulate, and implement moderate to complex digital signal processing modules using tools like MATLAB, Simulink, and VHDL/Verilog for FPGA platforms. + Collaborate with cross-functional teams - including hardware engineers, software developers, and system architects - to develop and integrate DSP solutions. + Receive and interpret technical instruction for defined project goals and collaborate on broader system designs. + Participate in meetings and communications with customers and partners to support project requirements and ensure deliverables are aligned with expectations. + Apply modern DSP techniques, algorithms, and methodologies to enhance existing architectures and develop cutting-edge solutions. + Contribute to complex problem-solving through hands-on development and team brainstorming. **Required Qualifications:** + Bachelor's Degree in Electrical Engineering (or related field) and 6+ years of prior relevant experience or Master's Degree and 4+ years of prior relevant experience. + Ability to obtain and maintain a US Government Security Clearance. **DSP Qualifications:** + Proficiency in Intermediate Digital Signal Processing Algorithms. + Solid understanding of DSP concepts such as filtering, FFT, and sampling theory. + Proficiency in Communications theory. + Some Proficiency in programming languages preferably C or C++. **FPGA Qualifications:** + Strong interest in FPGA development and low-resource digital design techniques. + Experience with RTL design in VHDL simulation tools, and synthesis flows. + Familiarity with FPGA platforms (e.g., Xilinx, Microchip) and embedded system development is a plus. **Preferred Technical Competencies:** + Software Defined Radios + Digital Signal Processing Theory + Signal Processing Algorithms: e.g., Rate conversion, Correlation and Filtering + C, C++ Programming: Object Oriented Design + DSP Algorithms using MATLAB/Simulink: Develop and pick up MATLAB models for bit exact design verification; May use SIMULINK (system generator) as an interim step. + DSP and FPGA Code Optimization + Modem Design (SATCOM, wireless, Cellular & SDR) + Physical Layers e.g. GSM, Wi-Max, Wi-Fi, Bluetooth + Real Time Debugging + Signal Impairments Testing, BER Testing: Modem Qualification experience. + Design Documentation + Performance Verification and Validation + Software/Hardware implementation collaboration + System Requirements Analysis + TFS, GIT Revision Control Tools **Clearance Level** No Clearance The salary range for this role is: AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship required **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Get to Know Us Better Realtime technologies, LLC offers the most flexible cutting-edge Retail Management Solutions that encompass sales, inventory management, frontline employee management and engagement, payments, business intelligence, and digital automation tools for the wireless industry. We support Fortune 500 companies, unify their customer experience, and remove pain points across multiple retail touch points. Realtime prides itself on fostering a team-oriented culture and a dynamic work environment, where team members are set up to make meaningful contributions across the organization. Site Reliability Engineer - Our team here at Realtime is looking for a Site Reliability Engineer to join our team. This SRE will be a key player in maintaining and improving the reliability of our systems. We're seeking SREs with experience in infrastructure tools like Terraform, Bicep, and Ansible, spanning both On-Premise and Cloud environments, including Azure. Your role will involve enhancing system stability, optimizing performance, and automating deployment processes. If you're a proactive problem solver with a passion for infrastructure and continuous improvement, this SRE position offers an exciting opportunity to make a meaningful impact. Responsibilities: Help maintain and enhance production monitoring and notifications. Improve reliability and quality of production systems. Measure and help optimize system performance. Work with delivery. and other teams to identify points of potential failure and then work to help enhance and improve systems to mitigate. Participate in capacity planning. Create automation to improve deployment speed, testing, and responding to operational issues. Work to meet service level objectives. Help build runbooks, tools, and other supporting tools to improve incident response. Monitor production systems and help manage incident response. Participate in post mortems, document outages, steps to recovery, future mitigation strategies. Work on both on-premises (data center) and cloud-based infrastructure (Azure). Experience working with server operating systems like Windows, Unix, Linux Experience working with monitoring via tools such as ELK stack, Grafana, Azure Application Insights Experience with Git or other distributed source control systems. Qualifications: Bachelor's degree (or equivalent) in computer science or related discipline Experience with tools TerraForm, Bicep, Ansible. Experience with both On-Premise and Cloud Providers preferably Azure Experience with Hyper-V and VMWare Experience with CI/CD Pipelines like Azure Pipelines, GitHub Actions, and OctoDeploy Experience with scripting languages like PowerShell, Python and Bash Proactive approach to identifying problems, performance bottlenecks, and areas for improvement. Experience with observability tools like Grafana, UptimeRobot, ELK, PagerDuty Experience working with Agile methodologies Equal Opportunity Statement: Real Time Technologies is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status. Salary Range: $70,000- $130,000 Annually Our compensation structure considers various geographical markets within the United States. The base salary for this role reflects the typical expected earnings. However, the final compensation package will be determined by several factors, including your location, job-specific expertise, skills, experience, and other relevant job-related considerations. What We Offer: A unique opportunity to shape the journey of Realtime Working within a rapidly growing, game-changing business Remote, flexible working options Competitive compensation Generous STI and LTI provisions Health, Dental and Vision Insurance Paid Annual Leave Paid Sick Leave 401K, and more

Role Summary/Purpose: The Process Engineer - Plasma Spray & HVOF will provide specialized expertise in thermal spray coating processes, focusing on Plasma Spray and High-Velocity Oxygen Fuel (HVOF) applications. This role is integral to supporting aerospace manufacturing operations, ensuring adherence to OEM standards, and driving continuous improvement initiatives. The engineer will collaborate closely with cross-functional teams to optimize coating processes, enhance product quality, and maintain compliance with industry regulations. Essential Responsibilities: Lead the development, implementation, and optimization of Plasma Spray and HVOF coating processes to meet product specifications and quality standards. Provide technical support to manufacturing teams, addressing process-related issues and implementing corrective actions as necessary. Create and maintain detailed work instructions, process flows, and technical documentation in compliance with aerospace industry standards. Ensure all processes align with OEM specifications and regulatory requirements. Conduct thorough root cause analysis for process deviations, quality issues, and failures. Develop and implement corrective and preventive actions to mitigate recurrence. Apply lean manufacturing principles to streamline processes, reduce waste, and improve efficiency. Lead or participate in continuous improvement initiatives, utilizing tools such as Six Sigma, 5S, and Kaizen. Provide training and mentorship to team members on Plasma Spray and HVOF processes, equipment, and safety protocols. Foster a culture of knowledge sharing and collaboration within the team. Work closely with cross-functional teams, including design, quality, and production, to ensure seamless integration of coating processes into manufacturing workflows. Communicate effectively with stakeholders to report on process performance, improvements, and challenges. Qualifications: Bachelor's degree in Chemical, Materials, Mechanical Engineering, or a related field or certification 3-5 years of hands-on experience with Plasma Spray and HVOF coating processes, preferably in aerospace manufacturing. Equivalent combinations of relevant education and work experience will also be considered in lieu of stated requirements Experience in creating and managing technical documentation and work instructions. Strong understanding of thermal spray coating technologies, materials science, and surface preparation techniques. Proficiency in CAD software (e.g., SolidWorks) for process design and simulation. Familiarity with aerospace industry standards, OEM specifications, and regulatory requirements. Experience in Maintenance, Repair, and Overhaul (MRO) environments is desirable. Demonstrated ability to perform root cause analysis and implement effective corrective actions. Strong analytical skills with attention to detail. Knowledge of lean manufacturing principles and experience in applying them to improve process efficiency. Ability to work collaboratively in a team environment, sharing knowledge and supporting team objectives. Physical Demands / Work Environment: The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently required to sit, stand, regularly use full range of motion of upper and lower extremities, regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Exposure to chemicals, noise, varying temperatures, and other workplace hazards however, PTI has established process, procedures, and protective equipment to reduce or eliminate exposures to these hazards and full compliance is a requirement of the job. About Us Propulsion Technologies International, LLC (PTI), a joint venture between GE Aviation & Safran Aircraft Engines, offers a great work environment with fast-paced, challenging and rewarding careers. Both GE & Safran are world leaders in the design and manufacture of aircraft engines, propulsion systems, & aircraft equipment. This could be your opportunity to join the exciting aviation industry! We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. PTI will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen.