Test Equipment jobs near me - 298 jobs

The Datacenter FieldOps team is responsible for supporting all production network cabling in the Datacenter. This global team offers a unique career opportunity to work with the latest network technologies and talented engineers, solving complex problems in the industry. Job Duties and Responsibilities Loopback Testing and Circuit Audits: Techs will perform loopback testing and circuit audits as per the project requirements. Loopback Testing Scope of Work: Identify all network circuits that require loopback testing Set up test equipment to simulate traffic on each circuit Perform loopback testing on each identified circuit Isolate and troubleshoot any faults or issues detected during loopback testing Document all test results, including any faults or issues found Circuit Audits Scope of Work: Conduct a physical inspection of all network circuits Verify that all network devices are properly configured and connected to the correct circuits Test the signal quality of each circuit Document all audit findings, including any discrepancies or issues found Remediate any issues found during the audit Overtime and Weekend Work: Overtime and weekend work will be available for all techs, as needed. Safety Briefings: Conduct regular safety briefings to ensure techs are aware of potential hazards and follow safety protocols. Physical and Mental Requirements Self-motivated, positive, professional, and proactive in process improvements. Promote company culture and mission. Proficient with required tools. Act as company liaison with customer representatives. Ability to work at heights, off ladders, in confined spaces. Lift up to 50 pounds and move up to 75 pounds. Good color vision, ability to read small print, and recognize audible signals. Skill Requirements Preferred in testing and troubleshooting MMF & SMF systems (OTDR & PMLS). Preferred 1-3 years of fiber experience. Preferred data center installation experience. Preferred mechanical and fusion splice experience. Preferred OSP / confined space entry experience (splicing). Proficient with trade tools including screwdrivers, torpedo level, tape measure, snips, pliers, hammer, wrench set, cable stripper, flashlight, gloves, punch tool, tone set, crimp tool, and Krone/3M/BIX tools.

A Cooling CE is responsible for installation, commissioning, scheduled and emergency service on Liebert Air products. The Cooling CE is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Cooling CE is also required to maintain continuous communication with Area/District Offices, and direct manager. RESPONSIBILITIES ROLE * Rely on direction to accomplish goals * Perform a number of work-related tasks * Capable of working under direct supervision or independently based upon training * Maintain certifications per Job requirements TECHNICAL * Render on site and phone assistance to customers. * Communicate with National Technical Support on equipment issues * Perform work related tasks according to company guidelines for scheduled maintenance * Implement Field Change Notices according to published guidelines * Keep current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips SAFETY * Operate in a safe manner in accordance with published safety guidelines * Must wear appropriate PPE as per company guidelines and accordance with job duties * Adhere to work hours policy guidelines - "14 hours rule" * Report all work related accidents or injuries within 24 hours to the appropriate personnel. * ADMINISTRATION * Provide accurate and timely reporting according to company guidelines * Timecards, expense reports, mileage reports, ticket closure, forms et al. * Maintain individual inventory in accordance with company policy * Maintain company property according to company policies * Vehicle, credit cards, PPE, test equipment, laptop, pager, et al. CUSTOMER SATISFACTION * Provide proper and adequate communication to internal and external customers * Provide estimated time of arrival to the customer for where applicable * Complete scheduled maintenance documentation properly and provide to the customer and local office upon completion of each designated assignment * Strive to provide all customers a "first time fix" for their equipment * Maintain customer satisfaction rates according to company guidelines * Attend Customer Meetings as required PERFORMANCE * Maximize productivity by combining service opportunities * Complete all work in an efficient and timely manner * Capable of making technical and commercial decisions under pressure * Properly evaluate site and equipment for appropriate billing status * Maintain productive utilization rate according to company guidelines * Perform inventory cycle counts according to company guidelines * Adhere to company dress code and safety regulations * Meet or exceed on-site response time requirements for each customer * Understand and comply with company startup/escalation processes and procedures * Maintain proper and adequate level of internal communications * Managers, co-workers, Support Services, electronic communications, et al. * Perform several work-related tasks * Capable of working under direct supervision or independently based upon training * Maintain certifications per Job requirements QUALIFICATIONS * High School Diploma or G.E.D. equivalent * HVAC - Certificate Program degree or equivalent experience in the field. * Six years military experience in a related field * Equivalent industry experience with EPA refrigerant license * Basic electrical knowledge * Interpersonal Skills * Professional * Reliable * Team Player * Familiarity with electrical / electronic test equipment and fundamentals * Must be able to read and interpret electrical line diagrams and blueprints * Working knowledge of OHM's law and HVAC theory * Technical skills * Ability to make basic site evaluation skills to include: environmental temperature, and general operating conditions * Elementary fix/repair techniques based on directed supervision * Capable of completing tasks and return unit to full operating conditions based upon directed supervision * Ability to summarize and report all work related tasks performed * Strong skill sets: * Communication skills * Customer service skills * Troubleshooting skills * Safety procedures * Organizational and planning skills * Computer skills * Mechanical aptitude PHYSICAL & ENVIRONMENTAL DEMANDS * While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Frequent driving (car, van, truck). Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship. * Extreme cold (below 32*) * Extreme heat (above 100*) * Noise Level (Medium / High need to shout to be heard) * Working around moving machinery (fork-lifts, tractors) * Protective Equipment Required (earplugs, gloves, eyewear, respirator, mask, etc.) * Work outdoors (no effective protection from weather) WORKING CONDITIONS: * Travel is required * Flexible schedules (weekends, evenings, and holidays) * May have on-call responsibility * Valid driver's license * Must be at least 18 years old The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $5 billion in sales, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-TW1

BUSINESS DEVELOPMENT MANAGER - US NEMs and LABs Team The candidate is responsible for supporting sales growth by working closely with the US NEM and LAB team. Location preference is for the Western region of the United States, but will consider other locations based on strength of candidate. The market that you will be supporting will include Network Equipment Manufacturers, Photonics and Optical Component Manufacturers, Webscale Labs, and University Research Centers. The ideal candidate must have solid knowledge in Advanced Optics, Wafer/die Level Optical Probing, and High-Speed transmission testing. What You'll Do: * Represent EXFO as an Advanced Optical technology expert in visits and technical discussions, helping customers to perform cutting-edge development projects around Photonic Integrated Circuits (PIC) and high-speed communications technology. * Provide pre-sales support to the NEM and LAB customer base. This will include, but not be limited to, online or onsite demonstrations, presentations, evaluation support, and technical reviews of our products. * Provide support presence at trade shows, conferences, and customer demonstrations focusing on technical product applications. * Participate in field evaluations to ensure customers are properly trained and tutored on EXFO testing solutions. * Work closely with the Business Unit and Marketing to ensure the most up to date product information is being delivered to the market. * Provide direct feedback to the Business Unit regarding competitive information and new feature requests received from the field. Technical Skills What We are looking For : * Well versed in communications technologies, including high speed transceivers, photonics, active/passive optical components and PIC technologies. * The candidate should have familiarity with testing and characterization of these technologies including IL/PDL measurements, polarization, BERT, scopes, protocol (Ethernet, OTN, etc.) as well as the ability to stay current with the latest emerging technologies. Required Aptitudes * Technical aptitude to understand customers' use case and position EXFO's solutions to meet their needs * Self-Starter and able to communicate and interact with people at all levels * Autonomous, well organized, and results-oriented, meets deadlines. * Possess leadership qualities and good interpersonal and communications skills * Excellent presentation, communication, and relationship building skills. Must Have Pertinent experience: Minimum three years' experience with communications test equipment, photonics, or equivalent Language requirements:English written and verbal. Education: Degree in Telecommunications, Optics, Engineering, or equivalent Ability to Travel: Approximately 25%-50% travel required. EXFO is an equal opportunity employer Diversity is an asset that has made EXFO strong since its inception because it enriches us. For more information about diversity and inclusion at EXFO, read our DEI Statement. For positions located in Quebec, the language requirement is French. However, in the context where the incumbent evolves in an international work environment and where the activities take place mainly outside Quebec, we favor bilingualism as a linguistic requirement. Do you have questions about this career opportunity or our hiring process? Contact us at

Job Title: Quality Technician - Electronics Department: Current State - Production / Future State - Quality Job Summary: The Quality Technician - Electronics is responsible for performing end-of-line testing of electronic equipment to ensure products meet functional, electrical, and quality specifications before release to customers. This role requires hands-on testing, troubleshooting, and documentation, working closely with production, quality, and engineering teams to maintain product reliability and compliance. Responsibilities: Perform electrical and functional tests on finished products using test equipment, fixtures, and software tools. Interpret test results, identify failures or anomalies, and escalate issues for corrective action. Troubleshoot and re-test units to verify resolution of issues. Follow established test procedures, work instructions, and safety guidelines. Maintain accurate test records, logs, and quality documentation. Collaborate with Quality, Manufacturing/Product Engineering, and Production to resolve testing or product issues. Support calibration, preventive maintenance, and continuous improvement of test equipment and processes. Ensure compliance with company standards, ISO 9001/14001, and applicable safety/electrical regulations. Requirements: Associate degree (2-year) in Electronics, Electrical Technology, or related field or equivalent work experience in electronics/electrical assembly/testing. Experience with test equipment (multimeters, oscilloscopes, power supplies, automated test systems). Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Attention to detail and commitment to product quality. Prior experience in electronics manufacturing or electrical assembly/testing preferred. Experience reading engineering drawings, software manuals, and technical documents Additional Requirements: Experience using calipers, gauges, and related equipment in a manufacturing environment Experience with the quality audit processes and reporting Experience working with in a technical support or troubleshooting role Ability to translate verbal and written instructions into process documentation Experience with Microsoft Suite software on a Windows platform Detail-oriented, with excellent organizational and record-keeping skills Ability to multi-task and problem-solve Strong written and oral communication skills Ability to regularly lift and move up to 25lbs. and occasionally up to 50lbs. Work Environment - Office/Production Floor: Chemicals, (See MSDS) Dust Paint Noise Protective Clothing and Equipment may be required Company Details Havis is at the forefront of revolutionizing industries by unlocking the full potential of technology to drive productivity and enhance safety through innovative mobility solutions. We take pride in being the trusted partner of choice for technology providers, enabling them to move business forward in a wide range of industries, such as Retail & Hospitality, Public Safety, Energy & Utilities, Warehouse & Distribution, Field Operations, Transportation & Logistics, Healthcare, and Military Defense. Havis designs and manufactures market-leading Computing, Mounting, Power, and Transport Solutions. Our engineering and product development centers serve as the backbone of our commitment to excellence. With a team of highly-skilled engineers who have a deep understanding of design, manufacturing processes, and cutting-edge technologies, Havis consistently delivers products that set our market and industry standards and exceed customer expectations. Our state-of-the-art manufacturing facilities complement our engineering capabilities, allowing us to bring our design concepts to life with precision and efficiency. Our focus on quality and rigorous testing protocols ensures that our products are built to withstand the demands of real-world applications. We are a dynamic and customer-focused company that continuously strives to meet and exceed the evolving needs of our valued customers. We firmly believe that collaboration lies at the heart of successful partnerships, and we actively engage with our clients to understand their unique requirements, challenges, and goals. By fostering open lines of communication, we work together to develop innovative solutions that drive safety, productivity, and, ultimately, customer satisfaction. Havis collaborates with partners and customers to provide product information, installation support, updates on industry testing and validation requirements to solve diverse challenges in the field. Havis, Inc. - Website: ************* Headquartered in Warminster, PA ISO 9001 and 14001 Certified - Quality Management System Fast growing company in a niche, growing marketplace Company offers Health, Dental, Vision and 401(k) Plan with employer match 100% employer paid STD, LTD and Life & ADD benefits Generous paid time off (PTO) and holiday benefits Competitive pay commensurate with education, skills, and experience Prepared by: Human Resources Approved by: Director of Operations

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Minimum Requirements: The candidate will have at least two years of industrial or service experience, ideally in a maintenance-related field, with an emphasis on safety. The candidate must also be able to communicate effectively and professionally via email and technical reports using proper grammar, spelling, and syntax. High school diploma or equivalent is also required. We are willing to train a motivated candidate with the right attitude and aptitude. A personable demeanor is required. Desired Attributes: An understanding of motors, pumps, fans, and bearings is desirable (general mechanical aptitude). At least 2-4 years of vibration testing and analysis is desired with ISO certification and Emerson/CSI test equipment (2130/2140) experience a plus. Compensation is commensurate with experience. Duties: Primary: Collect & analyze vibration data on a variety of industrial equipment (motors, fans, pumps, gearboxes, etc.) Understand spectral and time-waveform components for identifying faults Perform bump tests to determine natural frequencies Perform cross-phase analysis to determine comparative motion and differentiate similar faults Perform infrared thermography surveys on low and medium voltage electrical systems. OJT is available. Collect oil samples on a variety of industrial equipment (hydraulic systems, bearing housings, gearboxes, etc.) Collect deenergized electrical test data on low and medium voltage motor starter circuits (resistance to ground, resistance phase to phase, inductance phase to phase, capacitance to ground). OJT is available. Perform analysis and technical reporting on the above, meeting time requirements imposed both internally and by the customer Schedule service calls with customers and maintain a calendar Safeguard and maintain all company equipment Physical Requirements: Be able to climb permanent ladders (up to 40 vertical feet), crawl, stretch, kneel, stand and walk for extended periods, at least 8 hours Be able to walk up/down stairs equivalent to 50-100 vertical feet. Lift and carry up to 50 pounds Work wearing a dust mask or respirator Work for 1-2 hours while wearing acid PPE, including raincoats or plastic suits with face shields. Be able to travel by airplane and/or drive to customer job sites (some drives between 4-8 hours depending on candidate & customer proximity) Be able to spend multiple nights out of town (overnight travel typically 35-45% after initial training period of 6 months, up to 75% during training period) Be able to work in a variety of environmental conditions (>90F, Administrative Requirements: Basic computer skills (MS Word, MS Excel, MS Outlook, Adobe Acrobat) Good to excellent writing skills, grammar. Planning and scheduling time, including meeting deadlines Submitting expense reports and timesheets Benefits: Typical and competitive. Also includes company laptop, mobile phone, credit card, and service vehicle If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

IDEALFORCE has a CONTRACT position available immediately for a Desktop Support Technician (HDA2) to join our customer in Columbus, OH. This is an ONSITE position and requires an in person interview. Face to face interview is required and therefore only LOCAL CANDIDATES are considered. There may be travel required within the City of Columbus. Job Description Client is looking for an individual that can provide Desktop Support functions at the Department of Public Utilities to work approximately 40/hr per week in 2016. There may be travel required within the City of Columbus. -Responds to technology service desk trouble tickets to resolve personal computer problems through on-site or remote simulation and/or re-creation of the user's problem; -Documents steps taken to diagnose and resolve customer problems and closes trouble tickets; maintains records of statistics and tracking requirements, and hardware and software maintenance and repair; -Installs and configures new computers and software, including peripheral hardware; -Installs, upgrades, and maintains a variety of software applications and computer hardware, including peripherals; -Diagnoses, troubleshoots, and repairs software and hardware problems; -Closes trouble tickets upon completion of services or resolution of problem; -Performs backup activities and restoration of files on internal servers; -Participates in testing and implementation of new systems and procedures; -Refers complex problems to senior support personnel or determines an appropriate resolution path, as needed, and communicates with senior support staff to resolve system problems; -Requisitions supplies and materials as required; -May provide support for the technology service desk on an as needed basis. Qualifications Possession of an associate's degree with significant coursework (16 semester or 24 quarter hours) in computer science, computer information systems, computer programming, systems analysis, or closely related field and two (2) years of experience providing technical hardware/software support for desktop systems and applications. Substitution(s): Possession of a bachelor's degree in information systems or closely related technical field may be substituted for the required education and experience. Two (2) additional years of experience providing hardware/software support for desktop systems and applications may be substituted for the associate's degree. Possession of a valid motor vehicle operator's license. Considerable knowledge of the basic principles and methods of personal computer configuration and operation; considerable knowledge of operating systems; considerable knowledge of the functions and operation of computer peripherals and accessories; knowledge of the principles and methods of computer networking and the associated hardware; knowledge of Microsoft Office products and other contemporary software applications; knowledge of computer languages and programming; knowledge of modern office procedures, methods and computer equipment; skill in the use of hand tools and electronic test equipment; ability to troubleshoot hardware and software problems; ability to analyze problems and propose logical solutions; ability to read schematic diagrams and technical manuals; ability to maintain and prepare records; ability to communicate technical terms at a level appropriate to the audience; ability to communicate in writing; ability to follow instructions and procedures; ability to develop priorities and work sequences. Interview Process: Face to face. Additional Information Additional Information : - "All your information will be kept confidential according to EEO guidelines". - All candidates who are authorized to work in US are encouraged to apply. - Candidates must clear the Background check prior to commencing the assignment. THIRD PARTY CANDIDATES: Email your candidate/s resume to joseph dot shelton at idealforce.com along with the following details: Rate, Current location and Availability. Disclaimer : The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Scout Space Inc. is excited to announce our 2026 internship program! We are seeking candidates in various engineering fields. Please see the below role definitions for these opportunities. All internship opportunities are mainly remote, but may involve in-person opportunities. Scout Space is building a new way to see and operate in space: with a new paradigm of data empowering every satellite to make space safer. We are a rapidly-growing team; we are deploying real solutions to orbit over the next 2 years; and our work will transform the face of spaceflight. We are looking for people that bring excitement and energy to our organization, are curious and eager to learn, and want to help drive our programs forward. Responsibilities: Understand and develop mechanical requirements and constraints for spacecraft sensor subsystems Contribute to mechanical design, thermal analysis and structural analysis Design and model optomechanical prototypes and test equipment Support lab-based sensor integration and testing Requirements: Pursuing a Bachelor's or Master's degree in Mechanical Engineering, or other related field. Rising Juniors, Seniors, or graduate students only. SolidWorks or similar CAD software expertise Experience in data analysis in Python, Matlab, or Excel Hands-on fabrication and GD&T experience a plus Benefits & Perks: Flexible work hours Free Scout Swag! Opportunities for professional development and growth A dynamic and collaborative work environment at the forefront of space technology Be a part of a team that is making history! Compensation is based upon candidate experience and qualifications, as well as market and business considerations. Standard pay for this internship is $30/hour. Don't fulfill all the qualifications listed above? If you still feel like you might be a good fit, please feel free to APPLY ANYWAY. We believe in a well-rounded team, and this sometimes means that someone with out-of-context knowledge can contribute just as well as someone with very explicit alignment with our capabilities needs stated. Our positions are based in Reston, Virginia, with much of our team operating in a hybrid or remote fashion. Our preference is for candidates in or around this area (or willing to relocate) as we scale our facilities and engineering team to provide more opportunities to work and collaborate in-person. Scout Space Inc. does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor. To conform to US Government space technology export regulations, applicants must be a US citizen, lawful permanent resident of the US, a protected individual as defined by 8 USC 1324b(a)(3), or eligible to obtain the required authorization from the US Department of State. We're Proud to Prioritize Mental Health. Scout Space has been recognized with the Bell Seal for Workplace Mental Health by Mental Health America. This certification reflects our ongoing commitment to creating a supportive environment where mental well-being is valued, protected, and openly talked about. We know that when people feel seen and supported, great work happens, and that is the kind of culture we are building here at Scout Space.

Meta is looking for a forward thinking Network Operations Engineer to support delivery of field services as part of our Edge and Network Services (ENS) team. Someone who possesses subject matter expertise in hyperscale DC structured cabling, fiber connectivity solutions, and IP networking. Candidates will also have experience scoping developing and implementing strategies and plan in partnership with internal business teams, external vendors, and network design/engineering, and other cross-functional teams to develop strategies for integrating new technologies and to better support existing technologies across the operational fleet. An objective for this role is to understand technical drivers for the business, organize strategies to ensure the operational supportability to meet those business needs, and to represent ENS across stakeholder groups to ensure those critical projects are achieved. The team improves operational efficiency and reliability of one of the most advanced and rapidly evolving networks in the world. The right candidate will possess experience in a fast moving organization and enjoy digging into operational pain points in order to implement the process enhancements and automation solutions to solve them. The ideal candidate loves identifying root causes in complex systems and quickly learning new domain expertise and technologies. **Required Skills:** Network Engineer, Foundation and Support Responsibilities: 1. Incident Response: Drive work investigating complex technical and process issues on a global scale spanning multiple reliability, security, and continuity disciplines for infra during major incidents/site events (SEVs) on edge, caching, and network infrastructure. This will require you to work closely and effectively with a variety of cross functional teams, managed service providers, and third-party vendor partners 2. Change Management: You will be integral to identifying problems and implementing effective change within security & business continuity issues that affect the network, edge, and Infrastructure at Meta. This may include driving initiatives regarding improvements to existing tools & processes and providing feedback on new policies, practices, procedures in order to scale with the rapid expansion of the Meta platform and customer base 3. Operational Experience: As an operations practitioner within the ENS team you will be expected to drive operational efficiency in everything we do. In this role you will directly or indirectly oversee a large contingent workforce responsible for delivering roadmapped projects and executing on recurring operational activities. As such, identifying improvement opportunities across policies, processes, and procedures is essential to improve efficiency and quality of the activities. You will optimize service delivery with a keen focus on standards compliance across the network 4. Team Leadership: Set team goals and work globally with cross-functional teams within and outside the organization to deliver business outcomes predictability across global sites. This also includes analysis around operational datasets to detect and inform the prioritization of problems to resolve. This often culminates in the creation and communication of aligned team projects, programs, and roadmaps 5. Risk Management: Work with partner teams to design and implement aligned processes that identify and manage data and asset protection risks (i.e, security and privacy gaps, Business Continuity vulnerabilities), as well as operations continuity issues across the network 6. Information and Data Assurance: Ensure relevant operational process, procedure, and policy documentation is effectively managed and the data required to support operations is complete and accurate in systems 7. Automation: Be heavily involved in driving the team to analyze operational events in order to identify new automation opportunities and help us achieve our vision of all Tier-1 faults in the network being fully remediated by software. This will include helping others understand our requirements and drive their roadmaps, in some cases, directly implementing light weight solutions in code 8. Data Measurement: As an operations practitioner supporting our network, you will be expected to drive quality into the metrics we report to assist us in focusing on the areas that give us the best return on investment. This could include measurement and analysis of our escalation issues, fault/event trends, infrastructure capacity, and vendor performance failures. You should have the experience to formulate the right metrics and definitions of success to drive quality, efficiency, cost, and timeliness, and evolve these over time to match changes to the infrastructure and business requirements 9. Communication: provide clear and effective communication around personal and team goals, progress, outcomes, and lessons learned across assigned scope 10. Travel: International and Domestic travel may be required 25% of the time and up to 50% of time depending on needs of the business **Minimum Qualifications:** Minimum Qualifications: 11. Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience 12. Currently has, or is in the process of obtaining a Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience. Degree must be completed prior to joining Meta 13. 7+ years of work experience operating, deploying, and designing large-scale network, optical, and/or physical layer infrastructure 14. Hands-on experience with a variety of optical/network communication equipment including optical amplifiers, coherent transponders, network/fiber/copper test gear and other WDM equipment as well as associated tools and test equipment 15. 7+ years of network operations experience while supporting large-scale service provider, datacenter, and/or enterprise network infrastructure 16. Communication experience: demonstrated skills to effectively engage with hardware vendors, service providers, and colocation facility vendors globally and effectively translate performance issues into technical engineering requirements 17. Experience in providing technical guidance to external vendors 18. Intermediate subject matter expertise in Network Services, including topology, traffic analysis, hardware platform, and architectures 19. 7+ years of experience with telecommunication networks in the terrestrial optical transport networks including DWDM, network infrastructures, optical testing, optical measurement principles, structured cabling and experience with photonic layer 20. Subject matter expertise with physical infrastructure design: rack elevations, cable types, connector types, optic types, patch panels, and facility infrastructure 21. Familiarity with Enterprise and Service Provider network hardware platforms and architectures, including Cisco and Juniper routers/switches and Nexus data center switching hardware platforms 22. Experience with physical data center design: rack elevations, cabling, fiber optics, power/cooling, and facility infrastructure 23. Experience with network hardware platforms and architectures including Ciena, Infinera, Nokia, Arista, Cisco WDM Equipment **Preferred Qualifications:** Preferred Qualifications: 24. Experience moving technical or engineering programs and products from inception to delivery and experience articulating the impact using metrics 25. Direct leadership experience with global Network Operation environments and managing Service Level Agreements and continuous improvement against metrics at scale 26. Experience with purchasing, negotiating and end-to-end supplier management, such as managing global RFPs and contract negotiations 27. Advanced executive leadership communications experience **Public Compensation:** $133,000/year to $190,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

The Sr. Application Engineer, GSA is responsible for supporting the GSA account teams with technical solutions, analysis and proposals for GSA and other key customer projects to enable Vertiv to become the basis of design and win thermal solutions. This role will interface with the appropriate Vertiv Offering Management or Design teams to ensure compliance with project proposals and to provide input as to customer needs into the business. Interface with customers and the Consulting Engineering community to share technical knowledge around Vertiv products. RESPONSIBILITIES Manage a select list of GSA customer accounts. Support Account Plans to achieve both short-term and long-term account goals. Become the “Trusted Advisor” for these accounts advising them on how to achieve their short- and long-term objectives. Work with Bid Teams, Sales Offices and Account teams to analyze technical specifications, ensuring that Vertiv products meet customer design intent. Provide technical responses to customers and/or consultants that include performance runs, energy analysis, one-line drawings, CFD analysis and similar requirements. Compile and review product submittals in response to customer bids. Provide technical analysis of internal and competitive options for customer bids. Work with Technical Lead to review the commercial aspects of the bid, ensuring all products and services are included in the final price for the customer. Assist in all aspects of the technical proposal creation. Work with Vertiv Offering and Design Mgmt. teams to feedback customer requirements and needs to improve the product offering. Understand the control and operation of all Vertiv Thermal or Power products (depending on the product team assignment). Observe and recommend actions to improve the Order to Commissioning practices. Present to Industry Technical groups and Consulting Engineers Vertiv solutions. Interface with the Vertiv Global technical teams to be able to support customer global solutions. Participate in factory witness tests, development performance and test methods with customer and lab teams QUALIFICATIONS Bachelor's degree in engineering, business, or related field of study (or equivalent combination of education and experience). 4-8 years of industry technical experience. Service industry experience required with knowledge of electrical distribution systems, critical space environments, service products, and clients. Strong computer skills including editing, formatting, and using templates in all Microsoft Office programs, use of Internet for standards/products/manufacturer research, and operation of computer-controlled test equipment. A high degree of creative ability and independent judgment, working with minimal supervision. The ability to think and act strategically, utilizing account plans to set specific account objectives. Excellent communication skills, both written and verbal. Excellent organizational, analytical, and interpersonal skills. PHYSICAL & ENVIRONMENTAL DEMANDS Ability to take after-hour calls during nights, weekends, and holidays. Ability to work and multi-task in a fast-paced environment. TIME TRAVEL REQUIRED Travel 25%. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

EXFO develops smarter network test, monitoring and analytics solutions for the world's leading telecommunications service providers, network equipment manufacturers and webscale companies-and we love what we do! With nearly 1,900 employees in more than 25 countries, EXFO is no. 1 worldwide in fiber optic test solutions and has the largest active assurance deployment. Our broad portfolio of intelligent hardware and software solutions enable our customer's network transformations related to fiber, 5G, virtualization and big data analytics. We're always looking for top talent to help us lead the way in a thriving industry with boundless opportunities. Job summary The EXFO Distribution Channel Manager is a seasoned professional who has experience in supporting the sales efforts for high-value, IP-based, networking solutions at multiple levels within various fixed line, wireless and Enterprise/Datacenter telecommunications providers. Highly developed organizational and people skills are a must as you will be establishing and maintaining long-term relationships. The EXFO Distribution Channel Manager will be focused on selling the EXFO Portfolio. What you'll do Sales Focus: * Work closely with the National Channel Manager (NCM) and EXFO District Sales teams by promoting test equipment into key EXFO market segments. * Provide support at trade shows, conferences, and customer demonstrations focusing on technical product applications. * Develop and deploy sales training curriculum in coordination with National Channel Manager. * Develop MARCOM sales strategies for Distributors in coordination with National Channel Manager. * Participate in field evaluations to ensure customers are properly trained and tutored on EXFO testing solutions. * Manage technical aspects and evaluations in close coordination with sales team to ensure product approval. * Respond to RFPs in close coordination with sales manager to provide best positive response to all technical requirements. * Support will consist of maintenance and preparation of demo materials, performing product demonstrations, specific application support for clients and ongoing support. Taking full responsibility of the demo equipment and assigned company assets. Customer Focus: * Provide solution proposals and justification to suit customer needs. * Maintain close supportive relationships with Distribution Accounts and sales teams to ensure EXFO mindshare. * Perform QBR (Quarterly Business Reviews) with assigned Distributors to ensure alignment and account growth. * Work with Distribution to develop customized promotions and marketing plans. * Assists Distributors with customer facing activities that promote EXFO solutions. * Prepare and present technology seminars to educate customers and potential customers on EXFO's testing solutions. Product Focus: * Provide technical interface between Product Management Team and customers by developing and maintaining key technical relationships. * Advise Product Management Team on product feature/road map to coordinate with upcoming field requirements. * Provide competitive intelligence - feature set, road map, pricing Services Focus: * Understanding of end-user processes, in deployment and maintenance. * How a contractor steers their customer demands. * Knowledge of business rational of outsourcing deals. Other duties may be assigned. What we're looking for Technical skills * Demonstrated ability to work independently and meet goals is required. * Versed in the Fiber Optic and/or protocol technology. The candidate should have an extensive knowledge of the Physical and optical layer technology and applications (OTDR, loss test, dispersion, DWDM, PON and FTTx) and Protocols technology and applications (SDH, next generation SDH, ATM, Frame Relay, Gigabit Ethernet, Voice over IP, xDSL etc.) * Versed in GSA Sales cycle and sales channel management with an emphasis on distribution. Must have Pertinent experience: 5 years' sales experience is required, preferably in a technical capacity. Language requirements: Fluent in English. Education: Degree holder in Telecommunications, Engineering (Electronics) or equivalent. Travelling: Willing and able to travel, 50-70% of the time. Any other combination of experience/studies will be considered. EXFO is an equal opportunity employer Diversity is an asset that has made EXFO strong since its inception because it enriches us. For more information about diversity and inclusion at EXFO, read our DEI Statement. For positions located in Quebec, the language requirement is French. However, in the context where the incumbent evolves in an international work environment and where the activities take place mainly outside Quebec, we favor bilingualism as a linguistic requirement. Do you have questions about this career opportunity or our hiring process? Contact us at

Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Job Summary: The Fiber Optic Splicing & Testing Technician is responsible for managing and performing high-quality fiber optic splicing, testing, and troubleshooting for both inside and outside plant (ISP/OSP) environments. This role oversees splicing activities and ensures adherence to project schedules, customer specifications, and safety protocols. As a key team player, the Fiber Splicing Technician will work with a crew of technicians, ensuring that all work meets the highest standards of safety, quality, and efficiency while fostering collaboration across teams. Essential Job Functions: Able to work evening/night shifts Perform and oversee single/mass fusion splicing operations on high-count/bulk fiber optic cables using advanced equipment such as Fujikura 70/90 S/R splicers. Conduct and validate fiber optic testing using OTDRs, EXFO, Anritsu, and other industry-standard test equipment to ensure optimal performance. Interpret and execute design engineers' specifications, splice plans, and project scope, ensuring all work aligns with customer requirements. Work within a team of 4-6 technicians, ensuring quality standards are met. Maintain accurate documentation and prepare closeout packages for completed project phases, including test results, redlined drawings, and daily reports. Collaborate with Foremen/Supervisors, Project Managers, engineers, and other stakeholders to ensure alignment on timelines and deliverables. Inspect completed work to verify adherence to company and customer quality standards, addressing deficiencies as needed. Ensure proper care and maintenance of company-issued vehicles, tools, and equipment specific to the job. Knowledge, Skills, and Abilities: Expertise in fiber optic cable splicing techniques, including mass fusion and single fusion splicing, with a strong understanding of cable construction and specifications. Proficiency in operating and troubleshooting Fujikura, EXFO, Anritsu, AFL, and other advanced fiber splicing and testing tools. Strong knowledge of cable installation practices, including dressing, lacing, and terminating cables. Familiarity with cable testing procedures such as insertion loss, ORL, and bidirectional testing. Knowledge of OSP/ISP splicing enclosures, termination panels, and industry standards for fiber optic installations. Understanding of inside plant safety measures, data center security protocols, and public right-of-way regulations. Strong computer skills with proficiency in Microsoft Office and testing software for documentation and reporting. Exceptional attention to detail with the ability to make sound decisions based on technical data. Ability to multitask, stay organized, and maintain composure under pressure in a fast-paced environment. Effective leadership skills, including the ability to manage, motivate, and communicate with a diverse team. Bilingual (English/Spanish) Preferred Education and Experience Requirements: High School Diploma or GED required; technical certifications such as FOA Certified Fiber Optic Technician (CFOT) or equivalent preferred. Minimum of 3+ years of relevant experience in fiber optic splicing, testing, and installation. Experience in data center, telecommunications, or large-scale fiber optic infrastructure projects preferred. Valid driver's license with a satisfactory driving record required. Physical and Schedule Requirements: Ability to lift and carry up to 50 lbs. Comfortable working outdoors in various weather conditions and in confined spaces such as manholes and vaults. Able to work evenings, nights, weekends, and holidays, to meet project requirements. Core Competencies: Leadership and Team Management: Proven ability to guide and motivate teams while ensuring project objectives are met. Problem-Solving: Skilled at identifying and resolving fiber network performance issues efficiently. Communication: Strong verbal and written communication skills to effectively liaise with project stakeholders and crew members. Time Management: Excellent ability to prioritize tasks and meet deadlines in a fast-paced environment. NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

We are the movers of the world and the makers of the future. We get up every day, roll up our sleeves and build a better world -- together. At Ford, we're all a part of something bigger than ourselves. Are you ready to change the way the world moves? Ford's Electric Vehicles, Digital and Design (EVDD) team is charged with delivering the company's vision of a fully electric transportation future. EVDD is customer-obsessed, entrepreneurial, and data-driven and is dedicated to delivering industry-leading customer experience for electric vehicle buyers and owners. You'll join an agile team of doers pioneering our EV future by working collaboratively, staying focused on only what matters, and delivering excellence day in and day out. Join us to make positive change by helping build a better world where every person is free to move and pursue their dreams. What you'll do... - Create and implement the control strategy for various vehicle motion attributes and functions, including lateral and longitudinal vehicle dynamics. - Work with suppliers to define functions and interfaces into 3rd party components, driving further consolidation and integration of vehicle functions into our centralized vehicle motion control system. - Collaborate with software integration teams to bring up core functions and broadcast software level requirements to electrical hardware and systems teams. - Understand functional safety principles and participate in functional safety analyses of complex vehicle subsystems. - Develop comprehensive test plans and perform thorough testing to validate firmware functionality, stability, and performance under various conditions. - Author subsystem block diagrams and lead subsystem reviews through all vehicle program development phases - Collaborate with other system integration leads to capture component level requirements, provide subject matter expertise in sourcing discussions, and collect and approve Device Transmittals. - Early phases of firmware development will focus on hardware validation, labcar testing, and setting up the automation framework for unit, SIL and HIL testing. You'll have... - Master's degree in electrical engineering, Mechanical Engineering, or Computer Science, with evidence of exceptional ability, or equivalent. - 10+ years of experience on embedded controls systems such as chassis systems, VCM, or similar dynamic functions. - 10+ years of experience on electrical hardware applications, prototype bring-up, and systems development. - 10+ years of experience with Vehicle Network Protocols such as CAN, LIN & Automotive Ethernet - Strong EE fundamentals and hands-on experience with electrical test equipment (oscilloscopes, DMMs, signal generators, power supplies, etc.) - 10+ years of experience using embedded networking interface tools for automotive, aerospace, or similar field. - Experience and working knowledge of systems development, vehicle architecture, battery technologies, software/hardware tool development, motor calibration technologies, OBD calibration, functional safety, network, and diagnostics process. - Experience with creating and executing component-level test procedures and owning all test results. Even better, you may have... + Highly collaborative mindset and strong communication skills + Experience developing features such as hill hold, stability controls, anti-lock braking, park assist, cruise or adaptive cruise control, or other similar vehicle dynamic features. + Experience with software build tools like Bazel, Scons, Cmake etc. + Experience with fundamental hardware components on PCB and their analysis tools. + Ability to write testing scripts for using scripting languages (Python) + Fluent in software fundamentals including software design and maintainability. + Hands-on experience in hardware bring-up, system debugging, and code optimization. + Knowledge of electrical engineering fundamentals including circuit analysis and design You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply! As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder...or all of the above? No matter what you choose, we offer a work life that works for you, including: - Immediate medical, dental, vision and prescription drug coverage - Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more - Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more - Vehicle discount program for employees and family members and management leases - Tuition assistance - Established and active employee resource groups - Paid time off for individual and team community service - A generous schedule of paid holidays, including the week between Christmas and New Year's Day - Paid time off and the option to purchase additional vacation time. This position is a salary grade 8. For more information on salary and benefits, click here: ***************************** Visa sponsorship is available for this position. Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call **************. This position is hybrid. Candidates who are in commuting distance to a Ford hub location may be required to be onsite four or more days per week. #LI-Hybrid #LI-MZ1 **Requisition ID** : 51041

Apply here to be considered for our future Maintenance Technician openings: Our Talent Acquisition team will be reviewing applicants from this posting and determining if your skills and experience align with our Maintenance Technician roles. This review is for future hiring within our Groveport, OH fulfillment center. Please be aware that this role description is a generalized description and may not have the exact details of the role you could be identified for. Please ensure that you answer our application questions because we will use your answers to help identify you for the right aligned Maintenance Technician opportunity. If you are identified as a potential fit, one of our recruiters will reach out to set up a call to discuss our future opportunity. Who we are: We're Cart.com, one of the fastest growing commerce enablement companies in the world. We provide the digital and physical infrastructure that empowers thousands of leading B2B and B2C companies to unify commerce operations across channels and sell and fulfil anywhere their customers are. We're building toward a world where commerce has no bounds. Our enterprise-grade software, services and logistics infrastructure, including our own network of omnichannel fulfillment and distribution centers, enable merchants to navigate an increasingly complex operating landscape and drive efficient growth. Our goal is to be the global backbone of commerce. To achieve it, we're looking for entrepreneurial, innovative and determined teammates who are eager to help our growing base of customers simplify their commerce operations and seamlessly reach their own customers, wherever they are. Sound like you? We'd love to hear from you. Cart.com Fast Facts: 6,000+ customers worldwide 1,600+ employees globally 14 warehouses nationwide, totaling over 8 million square feet of space Our software lists $10+ trillion in product value across channels Our digital and physical operations support $8+ billion in Gross Merchandise Value Our values: Cart.com is building a company that is committed to living out these 6 core values: Be brand obsessed: Our lives are shaped by the brands we interact with daily. We obsess over the brands we serve, and about the things they care about. Think beyond the box: “We've always done it that way” is not a phrase uttered often at our office. We create creative solutions to complex problems. Don't give up: We learn from our challenges and see them for what they are; great building blocks to an amazing brand story. Speak up: We communicate clearly and directly because we care deeply. Communication is the bedrock of our community. Work together: We've built a team that prides itself on diversity of thought and background. Collaboration is better with contrast. Remember to be human: We work hard, but we leave room for the people, places and things that we love. The Role: This Maintenance Technician I performs daily start-up of material handling equipment. Inspects conveyors, sorters, etc. to ensure proper operations; notes, problems; and reports problems for service. Performs basic service on material handling equipment. Makes minor adjustments, lubricates moving parts, repositions photo eyes, and reports any problems. Changes batteries in powered lift equipment. Maintains batteries by cleaning, filling, and recharging. Performs basic plumbing by unclogging drains, repairing leaky fixtures, and installing new service under the supervision of a Maintenance Technician. Performs basic carpentry by repairing workstations, furniture, and doors as well as assisting with office renovation projects. Assists Maintenance Technicians with electrical troubleshooting, replacing, or repairing mechanical components, and performs preventive maintenance. Assists Maintenance Technicians with more complex repairs. Maintains a safe working environment. Cleans maintenance areas and lift equipment, replaces light bulbs throughout the facility. What You'll Do: · Performs and completes work assigned to individual; the individual does not assign work to others. · Performs many routine tasks independently, but also works as part of a team on some projects and tasks. · Follows guidelines on whether to repair or report equipment problems. · Required to use all hand tools, power tools, and test equipment, a 2-way radio, as well as operating powered lift equipment and vehicles. · Serve as a member of the Emergency Response Team for the facility. · Performs all other tasks as may be assigned. Who You Are: · Basic mechanical and electrical knowledge and abilities. · Displays team-player attitude. · Ability to organize tasks and be detail oriented. · Ability to work under pressure while maintaining a positive and professional attitude. · Ability to communicate with individuals at all levels of the organization. · Ability to stand or walk for extended periods of time. Ability to bend, stoop, and climb ladders. · Must possess a valid state driver's license. · Flexibility to work overtime and Saturdays as needed. What You've Done: · 1 year of maintenance experience OR completed at least half of an accredited technical program or course study and is willing to complete the remainder within 2 years from date of hire. Physical Work Environment: The physical demands described here are representative of those that are required by an associate to successfully perform the essential functions of this job. · While performing the duties of this job, the associate is regularly required to talk or listen. The associate is frequently required to sit, stand, walk, use hands to finger, handle or feel, as well as reach with hands and arms. · The associate must frequently lift and/or move up to 15 pounds and occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, distant vision, depth perception and the ability to adjust focus. · Ability to work in an open environment with fluctuating temperatures and standard lighting. · Ability to work on computer and mobile phone for multiple hours, with frequent interruptions. · Required to travel in elevator or stairwells to attend meetings and engage with associates on multiple floors throughout building. · Hotel, Airplane, and Car Travel Required. Currently, Cart.com does not intend to hire candidates who will need, now or in the future, Cart.com sponsorship through any non-immigrant visa category such as the H-1B, H-1B1, E-3, O-1, or TN. All hiring is contingent on eligibility to work in the United States. We are unable to sponsor or transfer visas for applicants. Cart.com is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description We're looking for a Security Test Engineer to design and execute test strategies that ensure the robustness and integrity of advanced silicon and IP products. You'll work across teams to identify vulnerabilities, validate hardware security, and support certification and manufacturing readiness. Responsibilities Define and implement test plans, coverage goals, and design-for-test (DFT) strategies for secure ICs and cryptographic IP. Conduct hardware-level vulnerability testing, including fault injection and side-channel analysis. Develop automated security test procedures and data analytics for test evaluation. Support product qualification, certification, and release-to-manufacturing processes. Collaborate with manufacturing teams to maintain security integrity in production. Prepare comprehensive documentation and technical reports. Mentor team members in hardware security testing best practices. Qualifications 8+ years of experience in semiconductor test, validation, or hardware security evaluation. BS/MS in Electrical or Computer Engineering or related field. Strong understanding of cryptographic principles, hardware security modules, and tamper-resistant design. Hands-on experience with Automated Test Equipment (ATE) or custom hardware setups. Proficiency in C/C++, Python, or Tcl for test automation. Knowledge of analog/mixed-signal fundamentals and secure memory design. Familiarity with standards like FIPS 140-3, Common Criteria, or ISO/IEC 17825. Excellent analytical, documentation, and communication skills.

Help us automate and maintain our future. Get ready for a job that encourages you to think strategically yet stay connected with your teams. Do you have problem-solving or strategy experience? If so, prepare to innovate, create, and inspire. The Pharmacy Automation Engineer (Automation Engineering Lead Analyst) is primarily responsible for providing first-level electrical and process Controls support for a highly-automated pharmaceutical filling and packaging system. Perform emergency, corrective, and preventive maintenance activities to restore equipment. In addition, key responsibilities will involve implementing equipment and system upgrades, engineering change controls, and continuous improvements. The position will support equipment installations, upgrades, or equipment expansions. Automation engineer also trains, mentors, and supports the development of other team members Responsibilities Performs advanced level maintenance and service on automated equipment by using and understanding electrical, mechanical, and pneumatic drawings and schematics, and using special test equipment and tools. Maintains reliability of the pharmacy automation equipment by executing preventive, corrective, and emergency work orders. Troubleshoot, service, install and repair automated production equipment, to include equipment modifications, upgrades, and spare parts inventory Utilizes knowledge and skill to monitor and improve the Mean Time Between Failures (MTBF) of the electro-mechanical equipment, and supporting application software systems. Observe system for degraded performance using routine inspections, maintenance rounds, and diagnostic equipment. Use a computerized maintenance management system (MAXIMO) to record labor hours, repair parts, and monitor pharmacy equipment performance. Recommend alterations to developers and designers to improve the quality or performance of processes and/or machines. Interpret the output of the reporting systems and take appropriate action that will result in the removal of the root cause problem from the system on a permanent basis. Document all emergency, corrective, and preventive maintenance work via work orders associated with Computerized Maintenance Management System (CMMS - MAXIMO). Operates on-site in an on-call capacity. Qualifications High School diploma; Associates degree preferred. Associate's degree in Industrial Maintenance or related technical field or 2+ years of maintenance experience in an industrial setting preferred. 0+ years of relevant experience with a Bachelor's Degree and mechanical electrical experience related to automated, industrial equipment preferred. Experience working in high volume production or pharmaceutical environment. Experience in troubleshooting complex PLC/computer-operated electro-mechanical equipment; PLC's, I/O, and field devices; repairing, setting up, adjusting, and tuning mechanical systems and pneumatic systems. Experience using of all tools and procedures needed to repair precision electro-mechanical machinery successfully the first time. Experience using preventive and predictive maintenance techniques. Experience using Maintenance Management Systems (CMMS) to report and follow-up on maintenance procedures and work orders. Flexibility to occasionally work outside of normal shift hours, including occasional weekends, as needed to satisfy operational requirements in support of customer demand. Minimal travel to other ESI facilities or vendor sites is possible. Shift schedule: Sunday - Thursday (6am-2:30pm). If you will be working at home occasionally or permanently, the internet connection must be obtained through a cable broadband or fiber optic internet service provider with speeds of at least 10Mbps download/5Mbps upload. About The Cigna Group Doing something meaningful starts with a simple decision, a commitment to changing lives. At The Cigna Group, we're dedicated to improving the health and vitality of those we serve. Through our divisions Cigna Healthcare and Evernorth Health Services, we are committed to enhancing the lives of our clients, customers and patients. Join us in driving growth and improving lives. Qualified applicants will be considered without regard to race, color, age, disability, sex, childbirth (including pregnancy) or related medical conditions including but not limited to lactation, sexual orientation, gender identity or expression, veteran or military status, religion, national origin, ancestry, marital or familial status, genetic information, status with regard to public assistance, citizenship status or any other characteristic protected by applicable equal employment opportunity laws. If you require reasonable accommodation in completing the online application process, please email: ********************* for support. Do not email ********************* for an update on your application or to provide your resume as you will not receive a response. The Cigna Group has a tobacco-free policy and reserves the right not to hire tobacco/nicotine users in states where that is legally permissible. Candidates in such states who use tobacco/nicotine will not be considered for employment unless they enter a qualifying smoking cessation program prior to the start of their employment. These states include: Alabama, Alaska, Arizona, Arkansas, Delaware, Florida, Georgia, Hawaii, Idaho, Iowa, Kansas, Maryland, Massachusetts, Michigan, Nebraska, Ohio, Pennsylvania, Texas, Utah, Vermont, and Washington State. Qualified applicants with criminal histories will be considered for employment in a manner consistent with all federal, state and local ordinances.

Our culture lifts you up-there is no ego in the way. Our common purpose? We all want to win for our customers. We aim to always be evolving, dynamic, and ambitious. We believe in the power of genuine connections. Each employee is a part of what makes us unique on the market: agile and dedicated. Time Type: Regular Job Description : Customer and Network Facing Technician About Our Company Breezeline is a dynamic, innovative company providing the very best Internet, TV, and Voice service to the US markets we serve. We are 'Above And Beyonders', who consistently strive to surprise and delight our customers by doing the unexpected. We continually look for new and better ways to enrich our customers' lives through connected and memorable experiences. As the eighth-largest cable operator in the United States, Breezeline reaches more than 1.7 million homes and businesses in 13 states with Internet, TV, Voice and fiber services. Headquartered in Quincy, MA, Breezeline is a subsidiary of Cogeco Communications Inc. (TSX:CCA). Why Work At Breezeline? As one of the country's fast-growing Internet service providers, Breezeline offers our colleagues a vibrant workplace culture and excellent career opportunities. As a proudly diverse and inclusive organization, we believe that every person's unique individuality should be welcomed and celebrated, and their abilities and potential should be honored and recognized. It is a key part of our culture to actively promote opportunities internally to ensure that you are never static in your career with us. Internal Values - How we act We're proud that Breezeline is unlike any other employer in the industry. We work hard, but we never lose sight of the big picture. We understand that our colleagues are looking for more than just a great job - they want an extraordinary life - and at Breezeline, we want to make that a reality. And here is how we do it. Fun: We laugh a lot. It makes every day brighter, and if you don't love what you do, you're not doing it right. Job flexibility: We think everything you do matters - at work and home. Discounted services: We offer our customers some fantastic services, and we think you deserve to enjoy them in your home, too. Total Rewards: Let's be honest, everyone wants to make a good salary. We offer attractive total rewards and a great culture to go along with it. We've got you and your family covered with one of the best packages in the business. Career evolution: At Breezeline, you get more than just a job. You get all the tools you need to learn, grow, and achieve your career goals! Cutting-edge technology: Do you have a passion for technology? Great, we do, too. At Breezeline, you will get the opportunity to manage, influence, play, create, fix, and re-shape the industry. Summary Under general supervision, the Customer and Network Facing Technician is a universal technician that is responsible for performing field installation and service work, troubleshooting, repair and maintenance of cable television, internet, and telephony systems. This role supports the growth of the system by ensuring the quality performance of technical services, installation setup, testing, and maintenance of all current and future products and services over Hybrid Fiber Coax (HFC) and Fiber to the Home (FTTH) networks. The incumbent ensures the quality of services provided to end-users meets or exceeds established industry and company performance standards and complies with FCC requirements and protocol. Essential Duties and Responsibilities * Install, maintain, disconnect, and troubleshoot television, high-speed internet, telephony, and automation systems for residential and business clients. * Performs preventative maintenance and repair of the HFC and FTTH networks, including all associated equipment, in accordance with company engineering standards. * Read and accurately interpret system/network design maps. * Install and replace HFC physical plant network components such as coax, actives, passives, grounding systems, pedestals, riser guards, conduit, etc., according to technical specifications. * Identify and repair upstream and downstream ingress. * Complete end-of-line network testing to meet technical specifications. * Regularly test all HFC network components using test equipment including: signal level meters, volt-ohm meters, leakage detector, Time Domain Reflectometer (TDR), and Optical Time Domain Reflectometer (OTDR). * Perform routine maintenance, troubleshoot, and update records of standby power supplies according to technical specifications. * Troubleshoot and repair basic distribution problems associated with RF, AC, and DC elements of the forward and reverse plant. * Restore system service outages. * Perform CLI rideouts and monitor and repair signal leakages. * Maintain tools and equipment inventory. * Accurately complete work orders in a timely manner. * Maintain, secure, and stock assigned vehicle and equipment. * Ensure productivity is being tracked through company applications (e.g., NRBY, WFX, Stratusync, iGlass). * Work alongside Headend personnel to properly OTDR any damaged fiber. * Properly assist on projects such as Remote Phy, 5-85 Mhz, Node activation, E2E testing on new properties, etc. * Prepare for daily work assignments by requisitioning equipment and supplies from the warehouse and stocking the vehicle as needed. * Maintain company truck and other equipment per service requirements and safety guidelines. * Drive a company vehicle between office/home, warehouse, and work sites in a safe and courteous manner, and in accordance with all laws and company policies. * Communicate with dispatch (via WFX, phone, etc.) for assistance, status on current installs, or new service requests. * Consult with supervisor and other technicians for advice and assistance as needed. * Interact with customers in a professional, courteous manner, including when responding to escalations and repeated customer concerns. * Educate customers regarding their existing and new services and promote other company services. * Comply with all safety procedures and policies. Competencies To perform the job successfully, an individual should demonstrate the following competencies: * Integrity: Tactful, maintains confidence, fosters an ethical work environment, prevents inappropriate behaviors by coworkers. * Initiative: Brings about great results from ordinary circumstances; prepares for problems or opportunities in advance; transforms leads or ideas into productive business outcomes; undertakes additional responsibilities and responds to situations as they arise without supervision. * Planning, Prioritizing, and Goal Setting: Prepares for emerging customer needs; manages multiple projects; determines project urgency; uses goals to guide actions and creates detailed action plans. * Communication: Clearly conveys information through a variety of media (verbal, written, e-mail, v-mail, etc.) in a way that engages the audience and helps them understand and remember the message; listens well. * Self-Development and Continuous Learning: Stays informed of current industry trends; actively identifies opportunities for learning; learns and applies new concepts to improve job performance; shares information with others on the job; takes responsibility for career development. * Customer Focus: Demonstrates a high level of service delivery; does what is necessary to ensure customer satisfaction; addresses and resolves service failures; prioritizes customer needs; makes customers and their needs a primary focus of actions. * Collaboration and Teamwork: Recognizes others' perspective, objectives and motives; works collaboratively towards solutions that benefit all involved parties and help accomplish common Cogeco objectives. * Attention to Detail: Alert in high intensity/high-risk environments; follows detailed procedures and ensures accuracy in documentation and data; carefully monitors gauges, instruments, or processes; concentrates on routine work detail and organizes and maintains a system of records. * Adaptability: Works with little supervision; manages ambiguity and autonomy; flexibility to work in an unstructured environment; deals effectively with uncertainty and change. Qualifications Minimum * Demonstrated proficiency in Core Technician skillsets. * Valid state driver's license and a good driving record within Company required standards. * Certifications and licenses, as required by state and municipal laws. * Successfully meet (and maintain) additional background check requirements for specialized projects/services. * Preferred 3 years or more of work experience in a comparable field (e.g., related hands-on trade role) or a one-year certificate from college or technical school; or equivalent combination of education and experience. * Minimum of one year of direct customer service experience. * PC and Windows software skills. * Able to work required shifts and overtime (if necessary), including regularly scheduled days as well as unscheduled days and beyond regular work hours (including on-call rotation) due to customer or operational demands. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to write routine reports and correspondence. * Communicates professionally and effectively with customers, vendors, and employees. * Ability to apply concepts of basic mathematics, algebra, and geometry. * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. * Ability to accurately measure distances, using tapes or other measuring devices. * Ability to adhere to Local, Federal regulations and Company policies. * Ability to carry, climb, and operate extension ladders up to and including 32' high and up to 75 pounds. * Ability to Operate Aerial Lift Equipment rated with a 350lb maximum total load capacity. * Ability to differentiate between different sizes and colors of wires. * Ability to drive company vehicles in a safe and responsible manner. * Ability to make cable connections in tight spaces by bending, reaching, twisting. * Ability to operate appropriate computer or test equipment associated with position. * Ability to prioritize and organize effectively. * Ability to carry and use a variety of hand tools, power tools and equipment.. * Ability to frequently bend, stoop, and crawl. * Requisite ability to drive commercial vehicle (DOT physical may be required). * Ability to lift an 88lb power supply from floor to 42". * Occasionally sit and climb ladders/stairs; performs fine motor and pinching movements, and pivots with feet and bends, twists, and laterally flexes back & reaches at overhead shoulder, knee, and floor levels, stoops, squats, crouches, kneels, and crawls and press foot pedals. * Frequently stands and walks & pushes/pulls with arms and grasps with hands & reaches at waist. * Ability to climb ladders and/or utility poles and work in high places including roofs.. * Ability to work in small / confined spaces (such as crawl spaces and attics) to tolerate typical residential and commercial controlled work environments as well as uncontrolled weather-related heat and cold for extended periods of time. * Ability to work outdoors and in extreme weather conditions and varying topographic, wet and dry locations. * Travel as business needs dictate. Preferred * High school degree or GED equivalent preferred; post-high school education a plus. * Spanish proficiency is desirable in some locations. Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts; high, precarious places; risk of electrical shock and vibration. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles and extreme heat. The noise level in the work environment is usually moderate. Benefits: * Competitive salary * Medical coverage (including prescription and vision plans) * Dental coverage * Life Insurance (1x salary at no cost to employee) * Long and short-term disability insurance (no cost to employee) * Voluntary employee, spousal, and child life insurance * Company recognized Holidays with additional Floating Holidays * Paid Time Off (PTO) programs * Comprehensive Flex Work Policy * 401(k) plan eligibility (company match 50% up to 5% of eligible contributions) * Participation in the Employee Bonus Plan * Participation in the Cogeco Stock Purchase Plan * Complimentary and discounted broadband services (for those in our service area) * Tuition Reimbursement * Headspace Membership * Betterhelp Membership * Opportunities for LinkedIn Learning subscriptions for select colleagues Location : Columbus, OH Company : Breezeline At Cogeco, we know that different backgrounds, perspectives, and beliefs can bring critical value to our business. The strength of this diversity enhances our ability to imagine, innovate, and grow as a company. So, we are committed to doing everything in our power to create a more diverse and inclusive world of belonging. By creating a culture where all our colleagues can bring their best selves to work, we're doing our part to build a more equitable workplace and world. From professional development to personal safety, Cogeco constantly strives to create an environment that welcomes and nurtures all. We make the health and well-being of our colleagues one of our highest priorities, for we know engaged and appreciated employees equate to a better overall experience for our customers. If you need any accommodations to apply or as part of the recruitment process, please contact us confidentially at ********************

We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Summary: Under moderate supervision, the BMET II provides planned maintenance (PM), electrical safety testing, routine and emergency corrective maintenance, calibration and installation of moderately complex diagnostic and therapeutic medical devices as assigned by the Supervisor. Responsibilities And Duties: 1. 60% Performs preventative maintenance PM , calibrations and electrical safety testing of medical devices and systems of moderate complexity. 2. 20% Performs corrective maintenance on certain specialized medical devices, including diagnosing failures of moderately complex networked medical systems. 3. 5% : Assembles and installs newly acquired medical devices 4. 5% : Conducts in-services and training to end users on the proper maintenance and operation of medical devices. May provide mentoring to other Clinical Engineering Specialist. 5. 5% : Maintains documentation that supports the maintenance and repair of clinical devices as required by regulatory agencies. 6. 5% : Assists Senior Clinical Engineers with the installation of sophisticated networked systems 7. 8. : 9. : 10. : ** COMPLETION OF WITH PERCENT Minimum Qualifications: Associate's Degree (Required) Additional Job Description: Field of Study: Biomedical Engineering Technology or equivalent military related training Years of experience: 1-2 yrs. exp in repair and maintenance of medical equipment SPECIALIZED KNOWLEDGE Anatomy & Physiology, Networks, medical terminology, regulatory standards and the use of diagnostic test equipment. DESIRED ATTRIBUTES Bachelors Degree of Applied Science in Biomedical Engineering Technology or equivalent military related training. CBET certified Work Shift: Day Scheduled Weekly Hours : 40 Department Clinical Engineering Join us! ... if your passion is to work in a caring environment ... if you believe that learning is a life-long process ... if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Director of Service Operations The industry leader for quality control and process optimization equipment utilized in the Pulp and Paper Industry is seeking an experienced Sr. Field Service Technician to support our customers in the Western United States. The successful candidate must possess solid electro-mechanical technical abilities as well as demonstrate excellent communication and customer service skills. In addition, the successful candidate must have the ability to work with a high degree of autonomy and provide our customers with outstanding service experience. Your Role and Responsibilities: Preventive maintenance, calibration, installation, corrective service and telephones. On-site and remote access support for laboratory and production process testing instruments. Service activities must be performed within established ISO certified policies and procedures and documented accordingly. Willingness to participate in continuing education and training as needed to meet customers' needs. The work model for the role is: #LI-Remote in Oregon (65-70% travel required in the territory and occasionally other areas) Our Team Dynamics Our teams support each other, collaborate, and never stop learning. Everyone brings something unique, and together we push ideas forward to solve real problems. Being part of our team means your work matters - because the progress we make here creates real impact out there. Qualifications for the Role: Associate's degree in electrical or equivalent work / military experience is preferred along with a minimum of 5 years related field service support. Experience with network support, computer repair and OS restoration as well as software configuration is preferred. Knowledge of calibration and electronic test equipment is strongly desired. General software knowledge a must (Win10, Win11, MS Office365). Ability to travel up to 65-70%, domestically and internationally with a valid US driver's license and acceptable driving record for the past 3+ years Applicants must possess US work authorization and be able to acquire a US passport What's in it for you? We give you the space to lead, the support to grow, and the chance to make a difference. Whether you're solving problems, building something new, or helping others succeed, your impact is real. You'll be part of a team that values your voice and celebrates your progress. ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. MyBenefitsABB.com Benefits: Our benefits? Competitive, comprehensive, and crafted with you in mind. ABB Benefit Summary for eligible US employees [excludes ABB E-mobility, Athens union, Puerto Rico] Go to MyBenefitsABB.com and click on “Candidate/Guest” to learn more Health, Life & Disability Choice between two medical plan options: A PPO plan called the Copay Plan OR a High Deductible Health Plan (with a Health Savings Account) called the High Deductible Plan. Choice between two dental plan options: Core and Core Plus Vision benefit Company paid life insurance (2X base pay) Company paid AD&D (1X base pay) Voluntary life and AD&D - 100% employee paid up to maximums Short Term Disability - up to 26 weeks - Company paid Long Term Disability - 60% of pay - Company paid. Ability to “buy-up” to 66 2/3% of pay. Supplemental benefits - 100% employee paid (Accident insurance, hospital indemnity, critical illness, pet insurance Parental Leave - up to 6 weeks Employee Assistance Program Health Advocate support resources for mental/behavioral health, general health navigation and virtual health, and infertility/adoption Employee discount program Retirement • 401k Savings Plan with Company Contributions • Employee Stock Acquisition Plan (ESAP) Time off ABB provides 11 paid holidays. Salaried exempt positions are provided vacation under a permissive time away policy. While base salary is determined by things such as the successful applicant's qualifications and experience, this position is expected to pay between $79,800 and $127,680 annually. More about us The Process Industries Division serves the mining, minerals processing, metals, cement, pulp and paper, battery manufacturing, and food and beverage, as well as their associated service industries. The Division brings deep industry domain expertise coupled with the ability to integrate both automation and electrical systems, increase productivity and reduce overall capital and operating costs for customers. For mining, metals and cement customers, solutions include specialized products and services, as well as total production systems. The Division designs, plans, engineers, supplies, installs and commissions integrated electrical and motion systems, including electric equipment, drives, motors, high power rectifiers and equipment for automation and supervisory control within a variety of areas including mineral handling, mining operations, aluminum smelting, hot and cold steel applications and cement production. The offering for the pulp and paper industries includes control systems, quality control systems, drive systems, on-line sensors, actuators and field instruments. Digitalization solutions, including collaborative operations and augmented reality, help improve plant and enterprise productivity, and reduce maintenance and energy costs. #ABBCareers #RunwithABB #Runwhatrunstheworld #LI-KP1 We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

At Vertiv, we design, manufacture, and service mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. We are the trusted Service Provider for 70%+ of Fortune 500 companies, including industry-leading data centers and providers of colocation and cloud service. Why Vertiv is the best company for Field Service professionals: * Vertiv is an industry leader in Technology and Services with a best-in-class Customer Service and Safety culture * Company leaders have many years of hands-on Field Service experience in this industry and many others * Tremendous focus is placed on employee technical and leadership development * Technical Training takes place in our state-of-the-art Training Academy or Regional Training Center with a strong focus on immersive, hands-on learning * Competitive benefits include smartphone, laptop, personal protective equipment (PPE), other tools-of-the-trade, 401k with a company match & Generous PTO/Vacation Plan, Medical, Vision & Dental & more * Abundant technical resources including 24/7 Technical/Factory Support and technical online libraries of product documentation, work instructions, and self-help troubleshooting guides * Company-wide commitment to promoting a strong work/life balance * An employer-of-choice for Veterans with technical backgrounds The Site Leader will provide world class jobsite leadership for large, long-duration, high-profile orders of Vertiv power and/or thermal equipment. The Site Leader is the primary Vertiv Service on-site technical representative for large jobs, from construction start, through start-up, site acceptance testing, and project completion. The Site Leader is required to establish, grow and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Site Lead is required to work in tandem with the assigned Project Manager to collaborate on cost controls, schedule adherence, resource management, and ultimately a positive customer experience. DUTIES & RESPONSIBILITIES: ROLE SUMMARY * Provide jobsite technical leadership for large projects * Ability to become factory certified on a variety of products that interact with Liebert systems: * Expert working knowledge of Electrical Power Distribution, Generators, Switchgear, Automatic Transfer Switches, et al. * Leads an on-site team of 1-2 Project Leaders who may be leading crews of 1-10 Technicians each * Represents Vertiv at daily customer meetings and can speak to technical requirements for the day's schedule to coordinate activity with other parties on-site * Leads and supports start-up and site testing activities for assigned projects * Ensure sufficient manpower on-site each day to perform start-up and site testing work * Assist during start-up and site testing as necessary, depending upon man-power availability and site location * Provide daily status reports to Service Management, Project Management and sales rep TECHNICAL RESPONSIBILITIES * Keeps current on Vertiv equipment start-up and commissioning processes, procedures, and tools-of-the-trade * Keeps current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips SAFETY RESPONSIBILITIES * Leads daily Vertiv toolbox talk, pre-job safety walk and inspection, and drives any necessary corrective/preventative actions required in a timely fashion * Operates in a safe manner in accordance with published safety guidelines * Must wear appropriate PPE as per company guidelines and accordance with job duties * Adhere to work hours policy guidelines - "14 hours rule" * Report all work related accidents or injuries within 24 hours to the appropriate personnel * Must be a role model to fellow associates with regards to safety by setting a positive example * Lead by example with the use of STOP WORK Authority, Good Catch engagement, and timely closure of necessary corrective/preventative actions ADMINISTRATIVE RESPONSIBILITIES * Ensure adherence to Vertiv Warranty process in partnership with Project Manager * Provide accurate and timely reporting in accordance with published guidelines * Timecards, expense reports, mileage reports, SR/task closure, forms, et al. * Supports Project Manager with obtaining any necessary technical data so Project Manager can maintain project systems * Maintain company property according to company policies * Credit cards, PPE, test equipment, laptop, smartphone, et al. CUSTOMER SATISFACTION RESPONSIBILITIES * Provide proper and adequate communication to internal and external customers * Ensure daily alignment of customer expectations and Vertiv activity, and drive clarification/re-alignment if there appears to be misalignment of expectations * Maintain customer satisfaction rates according to company guidelines PERSONAL PERFORMANCE EXPECTATIONS * Make decisions based on the Fundamental 5 in order of importance: Safety, Quality, Timeliness, Cost, Productivity * Capable of making timely decisions, technical and commercial, under pressure * Maintain productive utilization rate according to company guidelines * Adhere to company dress code and safety regulations * Understand and comply with company startup/escalation process and procedures * In all aspects of job requirements, must lead by example, and conduct themselves aligned to Vertiv Behaviors * Ability to communicate with all levels within the organization -Managers, co-workers, Support Services, sales, electronic communications, et al. * Ability to handle stressful situations and provide a calming effect to customer * High level of diplomacy when interacting with internal and external customers QUALIFICATIONS: * Experience (one or more of the following) * ASEET - preferred * Equivalent industry experience, specifically leading and actively participating in start-up and commissioning of Vertiv power equipment - preferred * ASMET * Six years military experience in a related field * Minimum 2 years of experience in Industrial construction management * Interpersonal Skills * Vertiv Behavior practitioner * Strong organizational skills * Independent operator * Strong verbal and written communication skills * Able to build and maintain trusting customer relationships * Collaborative and cooperative in high-stress environments * Able to communicate at all levels of an organization with a base level of executive presence * Able to quickly respond to changing customer priorities without disruption or resistance * Comprehensive knowledge of electrical / electronic test equipment and theory * Must be able to read and interpret electrical one-line diagrams and blueprints * In all aspects of the job, need to lead by example, and held to a higher standard of conduct * Product certifications up to date * Meet all aspects of the job description * Performance evaluation rating of meets all aspects of job requirement or better * Consistent performance and customer relation skills * Technical skills * Ability to make an immediate site evaluation, skills to include: environmental temperature, and general operating conditions without supervision * Ability to summarize and report all work related tasks performed * Independently evaluate, recognize and recommend acceptable customer solutions based upon site evaluation * Recommend and direct activities at a customer site by leading technical activities of other technicians * Provide on-site customer consultation with the assistance of Project Leader(s) * Capable of providing project leadership and on-site direction for assigned projects * Expert in Control of Hazardous Energy (COHE) procedures * Expert in site acceptance testing procedures and equipment * Computer skills * Advanced word processing, report generation * Spreadsheet processing * Electronic mail * Test equipment and data analysis programs * Familiarity with computer networks * Mechanical aptitude WORKING CONDITIONS: * Job assignments will typically be long-term assignments ranging from 4 weeks to 12+ months duration based upon the scope and schedule of the project * Travel will consist of a field rotation that includes (3) consecutive weeks on the customer site followed by (1) week of a service break in their home office whereby the Site Leader is expected to work their minimum of 40 hours on billable tasks and any administrative duties (i.e. Safety training, cycle counts, etc.) as necessary * Jobsites consisting of industrial new construction (greens field) or retrofit construction (browns field) * Flexible schedules (weekends, evenings, and holidays) * Valid driver's license * Deployable in the event of emergencies PHYSICAL REQUIREMENTS: While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds. Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-DR1