Welder fitter jobs in Houma, LA - 312 jobs

Job Title: 1st Class Structural Welder Position Overview: A 1st Class Structural Welder specializing in FCAW 3G/4G Structural Welding is responsible for welding together structural metal components following blueprints, work orders, or oral instructions. Key Responsibilities: • Obtains the appropriate tools needed for a particular job and subsequently sets up their equipment. • Binds together structural metal components that have been pre-assembled and tacked into place. • Performs good, cosmetic sound welds. • Examines his/her work and may chip off excess weld, slag, and splatter with the appropriate tools. (i.e., grinder, chipping hammer, etc.). • Leaves little or no rework when job is complete (i.e., cold rolls, pin holes, wraps, burn through, etc.). • Troubleshoots his/her equipment. • May gouge to remove a member, make a seam sound, remove weld reinforcement, etc. Experience: • A minimum of 6 months of FCAW 3G/4G Structural welding experience is required. Skills and Abilities: • Must successfully pass a hands-on welding test that includes: • 3G position: Welded with downhill progression. • 4G position: Welded entirely in the overhead position. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

Full-time Description Main Purpose: The main purpose of the Offshore Combo Fitter is to perform job functions required and assigned in iron fabrication as steel structures per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. This position is located Offshore in the Gulf of America, formerly known as the Gulf of Mexico. Essential Functions: Study engineering drawings to determine materials requirements and task sequences Read and interpret blueprint and specifications Perform mathematical calculations, addition, subtraction, multiplication, division, angles, etc. Measure, cut, fit, and install structural/pipe plate, pipe material, beams, plate, pipe, etc., per blueprint and job specifications Locate and mark workpiece from drawings cutting lines, checking for material thickness, welding shrinkage, and other component specifications Straighten warped or bent parts using sledges, hand torches, and straightening procedures Follow fitting procedures and principles used in fabricating offshore jackets, decks, heliports, production facilities, etc. Repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torches, straightening presses, and hand tools Lays out and installs piping, equipment, and other mechanical systems in compliance with construction drawings and specifications Inspect work sites for obstructions or holes that could cause structural weakness Verify conformance of workpieces to specifications using squares and measuring tapes Know how to pull coordinates to find pipes and get measurements Effectively communicate, both verbally and in writing Perform other duties assigned by supervisor Benefits Offered: Earned Wage Access Health, Dental, and Vision Insurance 401(k) with Company Match Paid Holidays Paid Vacation Life Insurance Disability Insurance Safety Awards Company Store Employee Assistance Program (EAP) Requirements Physical Requirements: Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing Turning, twisting, bending, and balancing Pushing, pulling and reaching Must be able to lift and/or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: 5+ years of experience and be able to successfully demonstrate the ability to pass a written and practical pipe fitter or a structural test Must be able to pass pre-employment physical and drug screen Must be able to pass a background check Ability to communicate effectively, both verbally and in writing Valid TWIC card Desirable Experience, Education, Training: Highschool diploma or GED Tools, Equipment and Technology: Fitters must know of and use cutting torches, measuring tapes, calculators, levels, man-lifts, high-reach equipment, welding machines, chipping hammers, pressure chippers, power grinders, etc. Must be able to read and write. Environmental Conditions: 80% to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. They may also be exposed to fumes (Paint, paint thinners, diesel, /or gas, etc.) Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means.

Job Description CDR General Services is seeking an Aluminum Fitter near Franklin, LA to perform precision aluminum fitting for marine applications. This role requires strong technical skills, blueprint reading ability, and attention to detail to ensure high-quality assembly and compliance with safety standards.Job Details Job Type: Full-Time Job Location: Franklin Pay Rate: $29 to $33 per hour Schedule: Monday to Friday, 6:00 A.M. - 5:00 P.M. (40 hours/week) Potential Overtime: Weekdays and WeekendsKey Responsibilities Read and interpret blueprints for aluminum fitting tasks. Perform accurate measurements and layout work using a tape measure. Identify and report fit-up issues to the supervisor promptly. Operate power tools such as grinders, saws, and drills safely. Perform minimal aluminum welding as required. Maintain consistency and quality in all work with minimal discrepancies. Follow all safety protocols and operate equipment in compliance with standards. Collaborate effectively with team members and demonstrate strong communication skills. Qualifications 3-5 years of experience in the ship/boat building industry as an aluminum fitter. Basic aluminum welding experience. Excellent math and problem-solving skills. Ability to read blueprints accurately. Strong work ethic and attention to detail. Physical ability to lift up to 50 lbs., stand, bend, stoop, squat, kneel, and climb stairs/ladders regularly.

Welder Helper Reports To: Welder Summary: Typical duties for a Welder Helper includes but are not limited to transporting materials, operating machinery, cleaning equipment, cleaning job sites, handing tools, disassembling defective products, and preparing raw materials for processing. Essential Qualifications, Duties, and Responsibilities: (Other duties may be assigned) Performs any combination of the following duties to assist worker in welding and thermal cutting activities: Moves workpieces, tools and supplies manually or by hand-truck. Lifts, moves and holds or clamps workpieces to table, into jigs or into position as directed, manually or by using hoist, pry bars, wrenches, hammer and wedges. Cleans workpieces to remove impurities such as slag, rust and grease using wire bushes, portable grinders, hand scrapers or chemical solutions. Connects hoses from hand torch to oxygen and fuel gas cylinders or connects cables from power source to electrode holder and workpiece or fixture. Starts diesel engines to activate electric generators. Places workpieces into furnace to preheat for specified time. Removes, tags or marks and moves finished work. May attach rigging equipment to objects in preparation for movement by crane or other hoisting mechanisms. Physical Demands: The employee must regularly lift up to 50 pounds and carry up to 25 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to stand; walk; climb or balance and stoop, kneel, crouch, or crawl. Welder Helpers must be willing to comply with PCM Health, Safety, and Environmental rules and regulations. They must also comply with all governmental regulations. The above description covers some of the principal duties and responsibilities of the job. The description shall not however, be constructed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. I have read and understand all the duties and requirements listed above.

Integrity Staffing has an exciting job opportunity for 1st Class 6G Tig/FCAW Pipe Welders in Houma, Louisiana! Requirements: Must have pipe welding experience in a shipbuilding environment Must have a minimum of 1 year Tig/Flux Pipe Welding experience Must successfully demonstrate the ability to pass a hands-on Tig/Flux pipe welding test on pipe in a 6G position on 2” pipe with 3/32” wall thickness using a gas purge with 1/8” root opening with all uphill weld progression and finish remaining passes using GTAW (Tig/Flux). Hours: Day and Night shift available Pay: Ranges from $25 up to $31 based on experience, test, and shift #I08

Job DescriptionHUTCO, INC. Ship Fitter Hutco Branch: Harvey, LA Rate of Pay: $24.00 to $26.00 per hour (based on experience) Hutco Inc. is seeking first-class ship fitters for shipyards located in Harvey, LA. Looking for first-class ship fitters only with shipyard experience. A test will be conducted on-site to assess your capabilities. It primarily repairs work on barges and boats. NO TWIC card is required. Description: Lays out and fabricates metal structural parts, such as plates, bulkheads, and frames, and braces them in position within the ship's hull for welding. Requirements: Minimum 2 years experience as a 1st class ship fitter Outfitting experience Must know Ship terminology Must lay out and fabricate parts for ships Must be able to burn, wash, and bevel with a hand torch Must pass a drug test and physical Must be able to work all shifts Benefits: A limited benefit plan is available to Hutco, Inc. Employees through Essential Staff Care. Available plans include: Medical/Prescription Dental Coverage Vision Coverage Short-Term Disability Benefits Term Life Benefits Accidental Death & Dismemberment Benefit CONTACT HUTCO TODAY! Apply ONLINE or at the Harvey Hutco Branch: 3635 Lapalco Blvd., Ste.100 Harvey, LA 70058 ************** Contact: Jose Ramirez (SE HABLA ESPAÑOL) ********************* Hutco is an Equal Opportunity Employer (EOE) #HUTCOSP

Job Description Role Title: 1st Class 6G Tig Flux core /Pipe welder Employment Type: Full Time Shift: Nights Job Summary: We are seeking experienced 1st Class 6G Tig Flux core -Pipe welder for a Shipyard that does outside New Construction work in Houma. Candidates must be willing to work 40 to 50 hours. All Pipe welders will have to pass a hand-on test and interview with the supervisor. Key Requirements Must Have ·Minimum 3 years of experience as a 1st Class 6G TigFlux core /Pipe welder . ·Must have all Pipe welder tools ·Must pass a drug screen Preferred Qualifications ·Experience with industrial or Fabrication shop 6G Tig Flux core /Pipe welder ·Strong knowledge of Pipe welder safety procedures. ·Proven reliability and consistent attendance. ·Experience working indoor and outdoor Pipe welder environment.

Job Description Labor One is hiring TIG Pipe Welders for a shipyard in Florida . Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 or (251)385-0491 *Please send us a text if we don't answer* POSITION SUMMARY Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Complete welds to the specified standards using appropriate equipment and materials. Install and verify operation of high-pressure steel pipes and fittings. Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipes and/ or similar tubular products. Test installed piping systems and install other related items in accordance with the applicable plans and specifications. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Troubleshoot equipment. Produce high-quality welds, including watertight penetrations with a variety of materials including weld steel, stainless, and aluminum. Work with minimal supervision. Perform other duties as assigned. REQUIREMENTS Education/ Experience: High school diploma or GED equivalence plus three to five years of pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror weld. Requires knowledge of welding symbols, ship terminology, Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of the safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/ adaptability, initiative, interpersonal skills, attention to detail, safety consciousness, and multitasking. Maintain the confidential integrity of details pertaining to shipyard. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstanding extreme heat and cold in an outside climate or confined space. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Fitter (Structural & Pipe) JOB CODE: FITR DIVISION: Onshore/Offshore/International REPORTS TO: Foreman/Supervisor/Superintendent DEPARTMENT: Onshore/Offshore/International The Fitter is responsible for cutting and fitting pipe or structural materials for welders. ESSENTIAL DUTIES AND RESPONSIBILITIES (This is a representative list of the duties the position may be asked to perform and is not intended to be all-inclusive.) Align parts using jacks, turnbuckles, wedges, drift pins, pry bars and hammers Mark reference points onto floor or face block and transpose them to workpiece Give directions to welder to build up low spots or short pieces with weld Straighten warped or bent parts using sledge, hand torch, straightening press or bulldozer Remove high spots and cut bevels using hand files, portable grinders and cutting torch Examine blueprints and plan sequence of operation, applying knowledge of geometry, effects of heat, weld shrinkage, machining and metal thickness Tack weld fitted parts together Position or tighten braces, jacks, clamps, ropes, bolt straps or bolt parts in position for welding Assemble and secure pipes, tubes, fittings and related equipment according to specifications by welding, brazing, cementing, soldering and threading joints Put all information on the pipe before cutting and transfer all item numbers onto cut sheet and carry over item numbers to drop pipe Ensure all numbers are clear and point to the right material when fabricating spool sheets Check measurements to assure they match with drawing and obtain approval from quality control department Inspect, examine and test installed systems and pipe lines using pressure gauges, hydrostatic testing, observation or other methods Plan pipe system layout, installation or repair according to specifications Read and understand blue prints and ISO's Obey and follow all safety rules and policies Wear all appropriate safety equipment (PPE) Perform all other duties as assigned by manager and/or supervisor MINIMUM QUALIFICATIONS AND REQUIREMENTS High School diploma or equivalent education 1+ years of fitting experience in an industrial setting Basic written and verbal skills Must have the ability to perform work accurately Must be reliable and have good time management skills For new hires, must meet all Performance Energy Services employment qualifications in force at time of hiring, including successful completion of a background investigation and pre-employment drug screen For new hires, must successfully complete all required training by Performance Energy Services PHYSICAL DEMANDS Stand - Frequently Sit - Occasionally Use Hands - Constantly Climb - Occasionally Kneel - Frequently Lift/Carry over - Frequently (up to 50 lbs.) Vision - Required (Must be able to pass vision exam per appropriate medical requirements) Hearing - Required (Must be able to pass an audio test per OSHA standards) WORKING CONDITIONS Wet or Humid (non-weather) - Occasionally Working near moving mechanical parts - Frequently Working in high places - Occasionally Exposed to fumes or airborne particles - Constantly Exposed to toxic or caustic chemicals - Occasionally Outdoor weather conditions - Constantly Risk of electric shock - Frequently Work with explosives - None Risk of radiation - Occasionally Noise Level - Very Loud ACKNOWLEDGMENT I have reviewed and understand the above and believe it to be accurate and complete. I can successfully fulfill each duty or task. I also agree that management retains the right to change this job description at any time. _________________________________ _____________________ Employee Printed Name Date _________________________________ _____________________ Employee Signature Employee ID

Job Description Supreme Integrated Technology is looking for candidates who want to take the next step in their career to join our 100% employee owned company. SIT's engineering expertise transforms ideas into success for hydraulic and electric powered movable structures. SIT specializes in custom systems and projects, making every project unique and offering the opportunity to solve challenge problems for customers. Our projects are typically for marine, oil & gas, defense, civil (movable bridges) and industrial power unit applications. We pride ourselves on a culture of teamwork - because we are a smaller company you have opportunity to be involved in every aspect of a project and make an impact from start to finish. The Welder/Fitter - Level 2 is responsible for performing welding processes accurately, using drawings, specifications, and verbal instructions under general supervision and for selecting the welding procedures and materials that are best suited for the job to ensure that all work is performed in a safe manner. Specific Responsibilities: Perform a variety of welding tasks in the fabrication of parts and the repair of equipment. Operate various cutting torches, welding & automotive equipment. Set and operate metal inert gas (M.I.G.) welding machines and oxygen-acetylene torches. Weld and repair equipment. Operate precision machine tools to exacting tolerances. Perform mechanical repairs on automotive equipment as required. Repair and perform light maintenance on buildings, grounds, and/or related facilities as required. Create a wide variety of parts from shop drawings that conform to specifications within acceptable time frames. Move and position raw materials and finished goods by use of pallet jacks and/or forklifts. Support and participate in the organization's continual improvement program to conform to ISO 9001 requirements by complying with the Quality Policy and procedures and meeting QMS objectives. Other duties as assigned. Requirements Education and Training: High school diploma or GED. Welder qualification. Forklift Operator card. Two (2) to four (4) years of experience in welding. Experience working in an ISO 9001 environment a plus. Desired Skills: Knowledge of all safety practices associated with welding, cutting and mechanical work. Ability to read and understand work orders, sketches, schematics, and drawings. Ability to weld and fabricate new equipment and parts, as well as broken existing equipment. Ability to use grinders, welders, cutting torches, drill presses, pipe threaders, and other basic mechanical tools. Ability to operate a forklift and pallet jack Benefits We offer a competitive salary and benefits package, including medical, dental, vision, life and disability insurance, and 401(k) plans with company match. A unique benefit SIT offers as part of Employee Owned Holdings, Inc. is an employee stock ownership plan. What is an ESOP? ESOP is a special retirement program that allows employees to own stock in the company. When you join EOHI, you automatically begin investing in your future (without having to purchase shares). We are a high growth company committed to training our employee owners to develop their skills and advance in their careers. Studies also show that retirement account balances for ESOP companies are 2.5 times higher. ESOP companies grow 2.5 times faster than those companies without employee ownership. Research shows employee owned companies are superior in performance, employee benefits and employee morale because everyone is working towards a common goal.

Job DescriptionJoin Our Team as an Aluminum Welder! Are you a skilled Aluminum Welder looking for an exciting opportunity to showcase your talents? Look no further! Unite Contracting in Harvey, LA, is seeking a dedicated Aluminum Welder to join our dynamic team. PAY: $23 TO $25 HOURS: 45 TO 53 HOURS PER WEEK Job Responsibilities: Performing high-quality aluminum welding according to specifications Reading and interpreting blueprints and drawings Ensuring the proper maintenance and care of welding equipment Adhering to safety standards and protocols Collaborating with team members to complete projects efficiently Qualifications: Proven experience as an Aluminum Welder Strong attention to detail and accuracy Ability to work independently and in a team environment Excellent communication and problem-solving skills Welding certification is a plus Benefits: Competitive pay Opportunities for growth and advancement Health and wellness benefits Supportive and inclusive work environment Training and development programs About Us Unite Contracting is a leading provider of construction and contracting services in Harvey, LA. With a focus on quality, safety, and integrity, we take pride in delivering exceptional results for our clients. Our team of skilled professionals is dedicated to excellence in every project we undertake. Join us in shaping the future of construction and make a difference with Unite Contracting. #hc185816

A welder is qualified through training/testing or certified to the American Bureau of Shipping (ABS) standards, based on classification level, to join metal together in varying positions/orientation through the use of one or many welding processes via manual, semi-automatic, or automatic equipment. Entry classified welders assist in layout and fabrication of various assemblies constructed of plate, structural, or pipe using quality temporary tack welding and under the supervision of a fitter. Higher level classified welders read and interpret welding symbols on engineering drawings and based on this information, prepare and weld joints contained within various assemblies constructed of plate, structural, or pipe. Higher classified welders also participate in quality and regulatory inspections and conduct required repairs. All welders conduct a 100% quality inspection of their work to ensure it meets engineering requirements and make repairs as needed. Duties and Responsibilities Wear appropriate personal protective equipment (PPE) required for job and classification. Comprehend blueprints, sketches, welding procedures, and templates. Effectively read and use tape measure and other required measuring devices. Effectively read and use weld gauges to inspect weld quality. Pass entry level welding test or ABS certification test, depending on classification and welding process. Proficient in one or many of the following welding processes; SMAW, FCAW, FCAW-G, GMAW, GTAW, SAW, A-CAG, BW, STUD Properly set up welding power supply and other related equipment Effectively use joint preparation tools and equipment, such as grinders and needle guns Effectively use pre and post heat tools and equipment, such as handheld torches and Tempil ™ sticks or IR temperature measurement sensors, when required. Control essential welding variables to produce quality welds. Based on classification, be proficient in manual, semi-automatic, and/or automatic welding equipment Enter and work in internally confined spaces wearing appropriate PPE. Manipulate and transport loads of up to 50 pounds. Assess work environment for safety hazards and take appropriate action to ensure safety of themselves and co-workers. Traverse gangways, ladders, and scaffolding at varying heights. Traverse and negotiate uneven heights and surfaces. Ascend and work at elevated heights. Conduct other duties as assigned. Critical Demands Must comprehend associated welding dangers, including fumes and spark Be capable of repetitive forward bending and rotation of the trunk and flexing of the hips and knees. Be capable of repetitive upper extremity movements while conducting work activities. Working Conditions The employee must comply with established company safety rules and OSHA standards. The employee must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. Must be able to hear warning signals and read and comprehend safety instructions, regulations, and warnings. Work is outdoors. There is no air conditioning or heating. Uneven surfaces throughout job site, with sand, limestone, concrete, and railways outside, as well as concrete and railways inside.

Summary Description: The basic function of a Structural Welder is to stick weld carbon steel. Worksite Location(s): Industrial facility on the waterfront in Belle Chasse, Louisiana. Company Description: Stewart Construction, LLC provides a wide variety of industrial and marine construction services, including the fabrication, assembly, installation, maintenance, and repair of docks, wharfs, pilings, dolphins, fender systems, coffer dams, intake and outtake systems, ship and barge material handling systems, and other, similar systems and structures, as well as demolition and removal services. Minimum Qualifications: 18+ years of age. Authorized to work in the United States. Reliable transportation to and from work. Must pass a drug-screen. Must pass a background investigation. Must pass a fit-for-duty examination. Preferred Qualifications: Welding certification from AWS (American Welding Society) with a D.1.1 (Structural Steel) endorsement, or its equivalent. 1+ years of welding experience (preferably in marine construction). 1+ years of experience working on or by the water (preferably the lower Mississippi River). TWIC (Transportation Worker Identification Credential). Ability to enroll in the DISA program. Benefits, Perks, and Opportunities: Regular, full-time employment. Competitive wages. Health insurance. Dental insurance. Employee Assistance Program (EAP). 401(k) retirement plan. Opportunities for professional development and advancement. Positive and supportive work environment. Stewart Construction, LLC is an equal opportunity employer. View all jobs at this company

SUMMARY Tube - Capable of certifying on multi-process tubes being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS - Work within precise limits or standards of accuracy. - Make decisions based on measurable criteria. - Apply basic mathematics to solve problems. - Plan work and select proper tools. - Visualize objects in three dimensions from plans and drawings. - Compare and see differences in the size, shape and form of lines, figures and objects. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Job Description We are now accepting resumes/applications for EXPERIENCED 3G/4G Combo Welders for the Thibodaux, LA and surrounding area. Duties/Responsibilities may/may not be limited to the following: Job Scope: Welding as needed Duration of Job: Temp to Hire Based on Job Performance Position Requirements: MUST have experience with 6GR MUST HAVE VALID LICENSE AND CLEAN MVR Technical school education is a plus, but high school diploma or GED is required. Must be able to pass physical Must be able to pass drug screen Must be able to pass background check Required Skills: Must have Flux Core welding and fabricating experience Must be able to weld in various positions Must be able to read and understand blueprint drawings. Excellent math skills with ability to efficiently read a tape measure Excellent problem solving skills Excellent communication skills Demonstrate strong work ethic Demonstrate consistency in quality of work Duties/Responsibilities: May layout and mark weld points on parts or subassemblies using ruler, square, scribe or templates Positions pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools Clamps, holds, tack-welds, grinds, and bolts components to position for welding. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications. Operates cutting equipment including torches and various power and hand tools Remove rough spots from workpieces, using portable grinders, hand files, or scrapers. Safely operates iron worker, grinders, overhead cranes, rigging, pipe threading machine, welding machine, and various pneumatic hand tools Assembly of components with some fabrication of equipment needed for the job with minimal supervision Mange housekeeping activities when requested. Maintain the work area clean, safe and organized. Assist in waste disposal and recycling activities Cleanup work area and equipment after work is completed. Execute daily work instructions received from Supervisor in a timely manner. Work effectively to meet or exceed productivity goals while maintaining high quality standards. Practice safety procedures in accordance with training and guidelines when working. Comply with company policies and legal guidelines, helping to maintain a safe and orderly work environment Meet quality and performance requirements as outlined by quality assurance and production standards Report safety hazards, quality, and production issues to management immediately Physical Requirements: Must be able to lift up to 50 LBS Must be able to stand, bend, stoop, squat, or kneel regularly, as well as climb stairs and ladders to complete tasks. Ability to work outdoors in harsh weather conditions Ability to work in varying hot and cold environments Ability to work in an environment with exposures to dust, dirt and various other debris, metal and paint fumes, gases While performing the duties of this job, the employee is regularly exposed to high, precarious places and outside weather conditions The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock Documents Required: Driver's License/Identification Card Social Security Card/Birth Certificate Must be able to pass a drug test. Must have reliable transportation Must have own welding shield and PPE (hard hat, steel toes, gloves, & safety glasses.) Pay: DOE Weekly Pay Pay Schedule: Monday - Sunday Schedule: Monday - Friday (Weekends as needed) 10-12 Hour Days (with weather permitting) Tasks beyond those listed above will be asked of you, so a positive, can-do attitude is required. Qualified candidates can submit a resume, apply on http://ejob.bz/ATS/jb.do?req GK=27089666&portal GK=14432

The Welder position is responsible for conducting maintenance, repair, and trouble-shooting activities. This position reports to the Welding Foreman. This position resides at the St. Rose Terminal, but is also responsible for duties at the Avondale terminal. Responsibilities Welding of both pipeline and structural steel Other duties as assigned by Welding Foreman Perform other duties as assigned. Education and Experience High School Diploma or equivalent Two years vocational training in Welding Three years of experience in terminal welding and maintenance work Valid Driver's License TWIC (Transportation Workers Identification Credentials) for access to IMTT's terminal locations. Skills and Abilities Clear and concise written and verbal communication skills in the English language. Ability to understand written and verbal communication in the English language. Ability to work independently and effectively in a team environment Ability to work closely with others with a positive attitude and a willingness to help others. Ability to represent IMTT in a professional and positive manner. Ability to manage numerous projects in a frequently changing work environment Compliance with all Company policies and procedures. Ability to interact with vendors, service providers, and employees in a professional and courteous manner. Good organizational skills and attention to detail. Ability to weld pipe and structural steel Hours of Work Typical hours of operation are Monday through Friday 7:00 am to 3:30 pm. This position requires overtime and occasional weekend work as job duties demand. Occasional travel may be necessary, sometimes with little or no advance notice. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Because the facility and adjoining facilities handle hazardous materials, the employee must be able to ingress and egress in foreseeable emergencies. The applicant must be able to work safely without presenting a direct threat to self or others. This would require the ability to lift to 25 pounds, bend, stand, or stoop, as necessary. Ability to perform climbing, bending, stooping, kneeling and moderate lifting. Must be able to work in confined spaces, over water and not be afraid of heights. The large scale of the operation and the extensive layout of the facility require that the employee can walk and stand on uneven terrain, to climb stairs and ladders, and traverse inclines: uphill, downhill or mixed. Must be able to work in a confined space, work over water, climb stairs and not be afraid of heights. Must be capable of wearing respirator and/or other PPE during some operations or emergencies. This job description is intended to describe the general nature and level of the work being performed. This is not an exhaustive list of all duties and responsibilities. The company reserves the right to amend and change responsibilities to meet business and organizational needs as necessary with or without notice. IMTT is an equal opportunity employer Minority/Female/Disabled/Veteran and a drug free workplace. We exercise high ethical standards and are committed to complying with all laws in the jurisdiction where we conduct business. Our internal policies and procedures support this commitment. If you like working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Now Hiring: 6G TIG GTAW Pipe Welders (Full-Time, No Per Diem) Unite Contracting is seeking experienced and highly skilled 6G TIG GTAW Pipe Welders to join our team in a full-time, permanent position in Norco, Louisiana. This is an opportunity to play a critical role in a growing company dedicated to excellence in fabrication and assembly. Please note that this position does not offer a per diem allowance. All candidates must complete a 6G TIG GTAW Pipe Weld Test and a Fluxcore Plate Weld Test 3G & 4G, as well as pass a drug screening and background check. Key Responsibilities: Perform high-quality TIG and Fluxcore welding on pipes and plates. Fabricate and assemble metal components to precise specifications. Install, maintain, and repair a variety of mechanical systems and equipment. Interpret blueprints, schematics, and technical drawings. Calculate and verify material dimensions and tolerances. Conduct inspections and tests to ensure weld integrity and compliance. Qualifications: Minimum of 2 years' experience with TIG and Fluxcore welding on 6G pipe Proven ability to pass a 6G TIG and Fluxcore 3G & 4G welding test Strong familiarity with welding equipment, techniques, and safety procedures Ability to read and interpret engineering drawings and blueprints Capable of lifting, bending, and performing physically demanding tasks Position Summary: As a Pipe Welder at Unite Contracting, you will be responsible for executing critical welding tasks in alignment with project specifications and safety standards. Reporting to the Lead Welder, your technical expertise and craftsmanship will directly contribute to the success of our operations in the construction and manufacturing sectors. Job Type: Full-Time Compensation: $30.00 - $32.00 per hour Expected Hours: 40-60 per week Benefits: 401(k) retirement plan Health, Dental, and Vision Insurance Paid Employee Referral Program Schedule Options: 8-hour shifts 10-hour shifts Day shifts We encourage qualified individuals from all backgrounds, including those with a criminal record, to apply. Work Location: In-person

Job Title: 1st Class Pipe Welder (FCAW/Tig) Position Overview: A 1st Class Pipe Welder prepares and welds pipe and fittings for various material types as specified by construction drawings and technical guidance documents. This position requires night shift work. Key Responsibilities: Prepare and weld pipe and fittings for various material types according to construction drawings and technical guidance documents. Ensure high-quality welds that meet industry standards and specifications. Follow safety protocols and maintain a safe working environment. Experience: Minimum of 1 year of Tig/Flux pipe welding experience. Ability to successfully pass a hands-on Tig/Flux pipe welding test on pipe in a 6G position on 2" pipe with 3/32" wall thickness using a gas purge with a 1/8" root opening. All welds must be performed with uphill weld progression and finished using GTAW (Tig/Flux). Skills and Abilities: Proficiency in Tig and Flux Core Arc Welding (FCAW) techniques. Strong understanding of welding procedures and best practices. Ability to read and interpret construction drawings and technical guidance documents. Precision and attention to detail in welding tasks. Good problem-solving skills and ability to work independently or as part of a team. Knowledge of safety protocols and practices in a welding environment. Ability to work night shifts. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

Main Purpose: The main purpose of the Offshore Combo Fitter is to perform job functions required and assigned in iron fabrication as steel structures per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. This position is located Offshore in the Gulf of America, formerly known as the Gulf of Mexico. Essential Functions: * Study engineering drawings to determine materials requirements and task sequences * Read and interpret blueprint and specifications * Perform mathematical calculations, addition, subtraction, multiplication, division, angles, etc. * Measure, cut, fit, and install structural/pipe plate, pipe material, beams, plate, pipe, etc., per blueprint and job specifications * Locate and mark workpiece from drawings cutting lines, checking for material thickness, welding shrinkage, and other component specifications * Straighten warped or bent parts using sledges, hand torches, and straightening procedures * Follow fitting procedures and principles used in fabricating offshore jackets, decks, heliports, production facilities, etc. * Repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torches, straightening presses, and hand tools * Lays out and installs piping, equipment, and other mechanical systems in compliance with construction drawings and specifications * Inspect work sites for obstructions or holes that could cause structural weakness * Verify conformance of workpieces to specifications using squares and measuring tapes * Know how to pull coordinates to find pipes and get measurements * Effectively communicate, both verbally and in writing * Perform other duties assigned by supervisor Benefits Offered: * Earned Wage Access * Health, Dental, and Vision Insurance * 401(k) with Company Match * Paid Holidays * Paid Vacation * Life Insurance * Disability Insurance * Safety Awards * Company Store * Employee Assistance Program (EAP) Requirements Physical Requirements: * Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing * Turning, twisting, bending, and balancing * Pushing, pulling and reaching * Must be able to lift and/or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: * 5+ years of experience and be able to successfully demonstrate the ability to pass a written and practical pipe fitter or a structural test * Must be able to pass pre-employment physical and drug screen * Must be able to pass a background check * Ability to communicate effectively, both verbally and in writing * Valid TWIC card Desirable Experience, Education, Training: * Highschool diploma or GED Tools, Equipment and Technology: Fitters must know of and use cutting torches, measuring tapes, calculators, levels, man-lifts, high-reach equipment, welding machines, chipping hammers, pressure chippers, power grinders, etc. Must be able to read and write. Environmental Conditions: 80% to 90% of the work activities are performed outdoors. Individuals will be required to work in changes of temperature, hot, cold, humid, wet, and dry conditions, dust, mud, etc. They may also be exposed to fumes (Paint, paint thinners, diesel, /or gas, etc.) Gulf Island will not sponsor applications for work visas. Additionally, applicants for employment with Gulf Island must be currently authorized to work in the United States on a full-time basis. Accordingly, Gulf Island will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Gulf island is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Gulf Island employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Gulf Island. No recruiting placement fee will be paid in the event Gulf Island hires the candidate due to the referral or through other means.