Assembly technician jobs in Abilene, TX

Details Sign on Bonus Available! Department: Cath Lab Schedule: Full-time Days Hospital: Seton Medical Center-Williamson Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Assist with procedures and provide diagnostic aid by conducting organ or body scans on patients. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and report abnormal activity. Monitor protocols and recommend updates or refinements as warranted. Follow radiation safety procedures and guidelines. Able to perform all specialized imaging procedures such as angio, complex vascular and nonvascular interventional and therapeutic procedures, along with assisting the Radiologist/PA. Ensure all activities comply with regulatory agency standards. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist credentialed from the Texas Medical Board obtained prior to hire date or job transfer date required. One or more of the following required: Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Cardiographic Tech specializing in Electrophysiology credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. ARRT-VI, ARRT-CI and ARRT-CV also accepted. Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Pediatric Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Additional Preferences No additional preferences. Why Join Our Team Ascension Seton, based in Austin, Texas, has provided thousands of associates and caregivers a rewarding career in healthcare since 1902. Ascension Seton operates more than 100 clinical locations in Central Texas and four teaching hospitals, including Dell Seton Medical Center at The University of Texas and Dell Children's Medical Center. Join us and create a career path you will love. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

What we provide: This is a seasonal position at Six Flags Over Texas, in Arlington, TX. It features a competitive hourly rate with perks, such as free entry to any Six Flags Park for all employees with each visit, additional complimentary tickets for friends and family, discounts on food and merchandise for all employees, flexible scheduling and weekly pay available. What you will do: Six Flags Over Texas is looking for a dedicated, organized individual to join the Entertainment Technical Services Team. As an Entertainment Technician, you will be responsible for assisting with the load in and load out of various show products and equipment, running assigned tracks for stage productions and special events, assisting with the installation and maintenance of all sets, props, sound, lighting and video equipment as needed, and working closely with the Technical Services team and Production Staff on any technical services projects as assigned. This individual will also ensure the smooth and safe operation of the assigned shows and special events. How you will do it: Perform daily operational duties to assist the department in the running of assigned show tracks Perform regular inspections of all scenic elements, audio and lighting systems, and special effects (fog machines) Repair and correct any issues quickly and safely to ensure a safe guest and team experience Assist the Technical Services team with new builds and repairs, load ins and load outs, system maintenance and other projects as assigned Effectively communicate with Entertainment Technical Services Leadership on any issues or safety concerns as they arise Operate various tools (including power tools), vehicles and equipment as assigned Adhere to safe work practices and policies that promote a safe work culture for the department and park Must be available to work weekends and all technical rehearsals, as assigned Must be available to work extended hours during specific times of the year Must be able to follow directions provided by the Technical Leadership team What you will need: Must be at least 18 years old. Must be able to work flexible hours on weekends during show and event operations as well as during tech rehearsals as needed Previous technical experience in the Entertainment/ Theme Park Industry preferred Must have some experience in carpentry, construction, or set building as well as some sound and/ or lighting experience Should be proficient in the use of hand tools and various construction equipment or be able to learn quickly Should have a basic knowledge of digital audio and lighting signal flow and be willing to learn the specific equipment used for each show and special event Strong motivated team player with a strong ability to multi-task Strong, verbal and written communication skills Must be able to work on projects independently as well as with a team Must ensure compliance with standard operating procedures, park policies, and regulations Must be able to move or lift tools or equipment weighing up to 50lbs Must be able to work indoors and outdoors in all types of weather conditions Should be able to work at heights of 20 feet or more and occasionally work at heights of up to 100 feet via catwalks, ladders and personnel lifts Valid driver's license to operate company vehicles, if assigned Other Notes: Reports to the Technical Services Supervisor or Lead and/ or the venue stage manager during the run of production or event Must be able to perform all other duties assigned or necessary to support the park operation as a whole Licenses & Certifications Valid Texas Driver's License

Trident Consulting is looking for a " Assembler - Mechanical III @ Houston, TX" for one of our clients. Job title : Assembler - Mechanical III Duration : 12+ months Pay rate : $22 - $24/hr on W2 Description: Gas Turbine Mechanic Would you like to work on mechanical equipment? Do you enjoy hands-on technical work? We are the leader in Turbomachinery. Our innovative physical and digital solutions improve efficiency, production and maximize value. Our team ensures high quality, consistency and reliability for all products throughout the complete life-cycle of our manufacturing production process. Partner with the best As a Gas Turbine Mechanic you will troubleshoot, test, assemble, disassemble and perform the visual inspection of Rotating Equipment. Whilst assisting in repairing and modifying non-conforming equipment, you will perform all test with minimal instruction. You will provide technical support across the business whilst complying with HS&E policies. As a Gas Turbine Mechanic, you will be responsible for: Demonstrating familiarity with hand, pneumatic and hydraulic tooling Accurately use precision measuring equipment (ID / OD / depth micrometers, calipers, etc.) Possessing a deep mechanical aptitude with ability to independently comprehend complex machining or assembly drawings Working as a team member to follow detailed work routers for inspection and repair of units and rotating equipment while under time constraints Providing On-Site support as needed Fuel your passion To be successful in this role you will: Have a High School Diploma or equivalent diploma Have minimum 5 years of overhaul and repair experience in at least one of the following areas: GE10, PGT 10/PGT 25, Frame 3/Frame 5 Have good knowledge of HSE requirements and be able to follow and update safety policies and procedures Job Description As a Mechanical Assembler in Aero you will perform various operations including but not limited to; disassembly, inspection and reassembly of rotating equipment including gas turbines units, and centrifugal compressors from multiple OEM's. About Trident: Trident Consulting is an award-winning IT/engineering staffing company founded in 2005 and headquartered in San Ramon, CA. We specialize in placing high-quality vetted technology and engineering professionals in contract and full-time roles. Trident's commitment is to deliver the best and brightest individuals in the industry for our clients' toughest requirements.

If you're looking for a Warehouse job, then look no further! Adecco is looking for candidates who thrive in a fast-moving environment for Packager jobs, in Waco, Texas, and we are hiring immediately! Pay rates starting at $17.25 - $17.75 per hour. These Warehouse jobs will allow you to enhance your career while gaining valuable manufacturing experience. Primary responsibilities for Warehouse Worker jobs include: Package cartons into shippers, palletize completed shippers Monitor product to ensure quality Follow all safety and GMP procedures and be willing to take temporary assignments as required Shifts we have: A1 Sun/Mon/Tues e/o Wednesday 7:00am-7:30pm: $17.25/hr B1 Thu/Fri/Sat e/o Wednesday 7:00am-7:30pm: $17.25/hr A2 Sun/Mon/Tues e/o Saturday 7:00pm-7:30am: $17.75/hr B2 Wed/Thu/Fri e/o Saturday 7:00pm-7:30am: $17.75/hr What's in it for you? Weekly pay starting at $17.25 - $17.75/hr. Fast Promotions to Packaging Operator III at $15-16.50/hr. with good attendance and performance! Competitive benefits with options such as medical, dental, vision, and 401(k) Daily pay offered! Generous referral bonuses offered Discount programs for Adecco associates for electronics, event tickets, travel, and more! For instant consideration for this Warehouse job, click on Apply Now! Pay Details: $17.25 to $17.75 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

About Us: LTIMindtree is a global technology consulting and digital solutions company that enables enterprises across industries to reimagine business models, accelerate innovation, and maximize growth by harnessing digital technologies. As a digital transformation partner to more than 700+ clients, LTIMindtree brings extensive domain and technology expertise to help drive superior competitive differentiation, customer experiences, and business outcomes in a converging world. Powered by nearly 90,000 talented and entrepreneurial professionals across more than 30 countries, LTIMindtree - a Larsen & Toubro Group company - combines the industry-acclaimed strengths of erstwhile Larsen and Toubro Infotech and Mindtree in solving the most complex business challenges and delivering transformation at scale. For more information, please visit ******************* Job Title: Rework/Soldering Technician with platform support(Onsite) Work Location: Austin, TX Job Description Soldering rework technician Knowledge on computer hardware Motherboards CPUs Memory DIMMs Addon cards Hard drives HDDs KVMs etc Ability to read electronic schematics PC board files BOM data etc Knowledge on IPC soldering standards Experience in soldering desoldering various SMT components fine pitch IC packages BGAs various connectors etc Experience in building custom cables Blue wire rework on multilayer PC boards Must be very skilled in Soldering rework domain Other Expectations from Candidate Attention to detail and well organized Able to lift 35 Lbs job may require shifting computers from one rack to another etc Candidate should have reliable transportation and are OK with daily commute as it is 100 onsite work Candidate must have good attitude communication skills Willingness to learn Benefits/perks listed below may vary depending on the nature of your employment with LTIMindtree (“LTIM”): Benefits and Perks: Comprehensive Medical Plan Covering Medical, Dental, Vision Short Term and Long-Term Disability Coverage 401(k) Plan with Company match Life Insurance Vacation Time, Sick Leave, Paid Holidays Paid Paternity and Maternity Leave The range displayed on each job posting reflects the minimum and maximum salary target for the position across all US locations. Within the range, individual pay is determined by work location and job level and additional factors including job-related skills, experience, and relevant education or training. Depending on the position offered, other forms of compensation may be provided as part of overall compensation like an annual performance-based bonus, sales incentive pay and other forms of bonus or variable compensation. Disclaimer: The compensation and benefits information provided herein is accurate as of the date of this posting. LTIMindtree is an equal opportunity employer that is committed to diversity in the workplace. Our employment decisions are made without regard to race, colour, creed, religion, sex (including pregnancy, childbirth or related medical conditions), gender identity or expression, national origin, ancestry, age, family-care status, veteran status, marital status, civil union status, domestic partnership status, military service, handicap or disability or history of handicap or disability, genetic information, atypical hereditary cellular or blood trait, union affiliation, affectional or sexual orientation or preference, or any other characteristic protected by applicable federal, state, or local law, except where such considerations are bona fide occupational qualifications permitted by law. Safe return to office: In order to comply with LTIMindtree' s company COVID-19 vaccine mandate, candidates must be able to provide proof of full vaccination against COVID-19 before or by the date of hire. Alternatively, one may submit a request for reasonable accommodation from LTIMindtree's COVID-19 vaccination mandate for approval, in accordance with applicable state and federal law, by the date of hire. Any request is subject to review through LTIMindtree's applicable processes

Oracle Business Analyst 6+ month contract Downtown Dallas, TX (Hybrid) Primary responsibilities of the Oracle Technical Business Analyst include overall coordination and follow up of requirements gathering for Data Management related projects, writing Business Requirements as needed for Agile projects, along with assisting in writing Technical Design and Data Lineage Documents. This candidate will also be responsible for tracking the progress of projects and related tasks, which will include tracking follow-ups from meetings and scrums, assessing the status of related JIRA tasks and coordinating planned releases. Responsibilities Liaison between business users and technical team Schedule business requirements sessions, document meeting minutes and track follow-ups Write Business Requirement Documents Assist with Technical Design and Data Lineage Documents Ensure Technical Design addresses the Business Requirements Effectively track the progress across projects and ensure business requirements are being followed Coordinate planned releases and send out release announcements Assist in creating, tracking and following up on JIRA tickets Conduct Stakeholder Interviews and facilitate meetings for requirements elicitation Ability to work in a team-oriented, fast-paced agile environment managing multiple priorities Qualifications 4+ years working as an Oracle Technical BA 4+ years working on Agile projects 4+ years of SQL experience (Oracle and SQL Server, MongoDB a plus) 4+ years of Data Analysis/Trouble shooting 4+ years writing Business Requirement, Technical Design and Data Lineage Documents Ability to interpret business requirements into technical requirements Strong Meeting Facilitator Must be able to multi-task effectively Great organizational skills Excellent communication skills Estimated Min Rate: $75.50 Estimated Max Rate: $99.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

Engineering Technician Compensation: $30 - $40 /hour, depending on experience Inceed has partnered with a great company to help find a skilled Engineering Technician to join their team! Join a dynamic and innovative team as an Engineering Technician. This exciting opportunity involves working onsite in New Albany, Ohio, where you'll play a crucial role in supporting engineering projects. The company offers a collaborative atmosphere and values professional growth, making this an ideal opportunity for someone eager to advance their career. Key Responsibilities & Duties: Utilize Spotfire or Power BI for data visualization Query data using Python and SQL Collaborate with engineering teams to support project goals Assist in data analysis and interpretation Maintain accurate records and documentation Contribute to technical problem-solving efforts Support onsite engineering activities Required Qualifications & Experience: Proficiency in Spotfire or Power BI Experience with Python for data querying SQL querying skills Internship or relevant experience in a technical field Strong analytical and problem-solving skills Nice to Have Skills & Experience: Experience with data visualization tools Familiarity with engineering projects Knowledge of additional programming languages Perks & Benefits: 3 different medical health insurance plans, dental, and vision insurance Voluntary and Long-term disability insurance Paid time off, 401k, and holiday pay Weekly direct deposit or pay card deposit If you are interested in learning more about the Engineering Technician opportunity, please submit your resume for consideration. Our client is unable to provide sponsorship at this time. We are Inceed, a staffing direct placement firm who believes in the possibility of something better. Our mission is simple: We're here to help every person, whether client, candidate, or employee, find and secure what's better for them. Inceed is an equal opportunity employer. Inceed prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Ready to take your EEG skills on the road? Join SynapseTBI, a fast-growing neurodiagnostics team, and bring life-changing testing to patients across the country. We're looking for a motivated Ambulatory EEG Technologist who loves patient care, enjoys flexibility, and is excited about a career that blends healthcare with travel. Company Description SynapseTBI offers a comprehensive protocol of objective diagnostic testing for the diagnosis of Traumatic Brain Injuries (TBI), Mild Traumatic Brain Injuries (mTBI), and Post Concussion Syndrome. Recommended and validated by the American College of Occupational and Environmental Medicine (ACOEM) for "Post TBI Patients who either have symptoms of cognitive deficits and/or have sustained a TBI sufficient to cause same", our services also include neurologist consultations, recommended treatment plans, psych evaluations, in-home TBI treatment programs including Neurofeedback, and life care plans. Role Description This is a travel role for an ERP/EEG Technician, primarily covering the Midwest Regions, preferably based in Texas. The EEG Technician will be responsible for performing Neurodiagnostic Testing, assisting with epilepsy and neurophysiology studies, ensuring patient care, and working closely with medical professionals to conduct diagnostic tests, assessments and treatments. What You'll Do: ✨ Travel to patient homes, clinics, and partner sites to set up and remove ambulatory EEG studies and/or run ERP testing along with other TBI diagnostic studies ✨ Apply electrodes and ensure clean, accurate data collection ✨ Teach patients and families how the test works and answer their questions with confidence ✨ Keep equipment in top shape and maintain detailed study records ✨ Represent our company with professionalism, compassion, and a patient-first mindset What We're Looking For: ✔️ EEG experience preferred, but not required (we will teach the testing for the right candidate) ✔️ Someone that works well on their own and doesn't require a micro-manager ✔️ Credentialed techs (R. EEG T.) a plus - but not required ✔️ Someone flexible, detail-oriented, and ready to travel ✔️ Strong communication skills and a passion for helping patients ✔️ A valid driver's license and reliable transportation required Why You'll Love It Here: 🌎 Travel nationwide with all lodging and travel expenses covered 💰 Competitive salary + a comprehensive bonus plan 🩺 Full benefits (health, dental, vision, PTO) 📈 Ongoing training and career growth opportunities 💡 Work with a supportive team that values your expertise If you're looking for a career that takes you beyond the walls of a hospital and gives you the chance to explore new places while making a difference in patients' lives-this is it.

/RESPONSIBILITIES Provides and administers competent Hyperbaric Medicine services to patients as prescribed by the Physician. Responsible for safe and effective operation of the hyperbaric chamber(s) and related support systems. Responsible for the safe delivery of hyperbaric oxygen therapy to the hyperbaric treatment. Provide care in accordance with age specific guidelines for each age group as evidenced by the skill/competency checkoffs. Comply with departmental and University Health policies/procedures, and maintain good relations with co-workers and guest. EDUCATION/EXPERIENCE High school diploma or equivalent (GED) required. Wound care center operator must be a healthcare professional actively certified or licensed in one of the following vocations to meet the minimum education and experience requirements: (Respiratory Therapist, Military: Corpsman or Medical Services Specialist, Emergency Medical Technician or Paramedic, Licensed Practical Nurse, Licensed Vocational Nurse, Certified Hyperbaric Specialist, Certified or Registered Medical Assistant, Certified Hyperbaric Technologist, Certified Nursing Assistant, Certified Hyperbaric Wound Specialist, Physical Therapist or Physical Therapy Assistant, other allied healthcare professions as approved by NBDHMT for certification eligibility, individuals who have successfully completed U.S. Department of Defense (DOD) hyperbaric training. Successful completion of a certification program in Hyperbaric Medicine is required by the National Board of Diving and Hyperbaric Medicine Technology, Department of Defense, American College of Hyperbaric Medicine, or Undersea & Hyperbaric Medical Society is required. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card. ACLS preferred. Maintains competencies, continuing education, and certifications as appropriate. One year of experience required. Must have completed approved Hyperbaric Safety Director Course or attend within 6 months of employment.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

Works in conjunction with welding team and other assemblers to fabricate and build, customized and large scale, oil and gas manufacturing equipment. Work may involve knowledge and/or operation of fabrication machines, heavy overhead crane, forklifts, and other welding equipment. Responsibilities and Duties May assist with bending tubing 1/4” to 1” carbon or stainless steel Understands basic blueprints with moderate supervision Assists with installing weld pipe, screw pipe, and making supports and braces Experience with chop saw, band saw, drills, thread machines, etc. Run screw pipe with some supervision Read tape measure Basic knowledge of tools Must be able to work with the team in developing improved work processes for the department Primarily fabricates and assembles screwed piping, welded piping, tubing, and associated brackets to all drawings provided QUALIFICATIONS Knowledge of relative safety standards High school diploma or equivalent preferred and/or training 0 - 2 years experience in manufacturing or fabrication Vocational or technical education a plus Tack Welding Experience Knowledge of pipe metals and schedules a plus Must be able to stand, walk, bend, squat, climb stoop, twist, reach and work at elevated heights for extended periods of time Must be able to lift up to 50lbs and carry objects up to 25lbs frequently Must be able to work in outside in extreme cold or hot temperatures

Join a dynamic team to support capital projects and implement solutions that drive critical changes and improve performance for clients. Work individually and collaboratively to achieve client goals with precision and efficiency. Responsibilities * Coordinate operations technicians' work schedules and manpower forecasts. * Manage and track commissioning constraints and deficiencies related to schedule or quality of Basebuild utility systems post-construction installation. * Integrate construction and design schedules with commissioning activities. * Provide reports and updates on schedule and quality metrics. * Conduct system and facility engineering job walk assessments. * Troubleshoot and perform root cause failure analysis on assigned projects. * Train suppliers in the commissioning software systems of the owner. * Provide and manage access for suppliers in the owner's commissioning software systems. * Interface effectively with engineering design team members and client representatives. Essential Skills * 2+ years of experience in commissioning or construction for I&C or Electrical Basebuild systems in the Advanced Technology sector. * Experience with Rockwell Automation, PLC5, and Control Logix hardware and software. * Experience with multi-discipline large capital projects involving Owners, General Contractors, Contractors, and System Integrators. * Good understanding of Design/Build (Engineering and Construction). * Knowledge of complex process systems architecture and design, Instrumentation, Device Selection, Networking, PLC & I/O architectures, P&IDs, data sheets, and SCADA. * Working knowledge of environments common in large industrial applications such as Dry/Wet Mechanical, AWN, Gas/Chem Distribution, HVAC, and Clean Room environmental control. Additional Skills & Qualifications * Proficiency in control systems programming and configuration. * Strong understanding of HVAC, electrical, and building automation systems. * Ability to read and interpret technical drawings and schematics. * Familiarity with various control system platforms; BMS or SCADA is a plus. * Experience conducting I/O checkouts. * Excellent problem-solving and analytical skills. * Strong communication and teamwork abilities. * Attention to detail and a proactive approach to work. * A bachelor's degree in electrical, mechanical, chemical engineering, or a similar technical field is preferred. * An associate's degree or technical certification in electrical, mechanical, or control systems engineering or a related field is acceptable. Direct experience will be considered in lieu of a degree. * Minimum of 3 years of experience working with control systems in a data center or similar environment. Work Environment This role requires onsite work in Abilene with a 50-hour work week. Per diem is included. The team is recognized as industry leaders, offering opportunities for growth and participation in industry events. The work environment involves collaborating with seasoned leaders, technical specialists, and subject matter experts to deliver high-quality solutions consistently and accurately. Job Type & Location This is a Contract position based out of Abilene, Texas. Job Type & Location This is a Contract position based out of Abilene, TX. Pay and Benefits The pay range for this position is $32.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Abilene,TX. Application Deadline This position is anticipated to close on Dec 31, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Essential Functions Summary: The Assembler position is essential in the aggregation of sheet metal control house building. They will assist with layout, measure, and marking dimensions and reference lines. The Assembler needs to be versatile and willing and able to quickly learn a variety of skills. The Assembler works independently, quickly, and efficiently with little supervision. The individual we are looking for will be a team player and willing to help wherever there is need. Attributes: Assemble sheet metal control house buildings. Layout, measure, and mark dimensions and reference lines. Maintain the production yard in a clean organized fashion. Use relevant hand tools in various stages of assembly. Work through a different number of tasks in various stages and areas of production. Operate specialized equipment. Work safely every day wearing proper PPE such as safety glasses an ear plugs. Other job-related responsibilities as assigned. Required Knowledge/Experience: High school diploma or equivalent (Required) 1 - 2 years' experience in the field of manufacturing or assembly (preferred) Welding and fabrication experience (desired) Experience driving a forklift (desired) Knowledge of proper use and care of hand and power tools Must be able to work from 10' ladder Knowledge of jobsite safety and ability to always ensure a safe workplace Have reliable attendance, be respectful, and responsible at work. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions . Attributes Core Values: Have Humanity: We treat every teammate, customer, and partner with respect. Be Transparent: We communicate clearly and honestly - whether reporting progress, identifying defects, or raising improvement ideas. Drive Innovation: We continuously seek smarter ways to assemble, test, and deliver our products. Be Resilient: Assembly requires persistence and adaptability. Always Reliable: Our customers depend on us for precision and consistency. We take pride in doing the job right the first time. Grit: We bring determination and focus to every task. Working Conditions: Warehouse/Shop floor environment. May require occasional overtime to meet production deadlines. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

A great Client in Odessa is seeking to find an Electromechanical Tech - Job description:This position is for an industrial field services company operating with high standards of field and shop services in the Permian Basin. They value safety, quality, expertise and customer success while striving to maintain their employees work life balance. Role Summary/Purpose: The Electromechanical Technician, performs a wide variety of tasks both in shop and in the field involving electric motors, generators, switch gear, transformers and other powered equipment. Responsibilities include dismantling, rewinding, brazing, insulating, bracing, re-wedging, working with epoxies, retaining ring removal & refitting. Work is performed in accordance with approved instructions and direction of the shop manager.Essential Functions: Inspects motor/generator equipment for damage and evidence of malfunctions. Refurbishes, tests and rewinds motors/generators and repairs other electromechanical equipment. Dismantles and/or strips damaged or unserviceable mechanical equipment. Operates mobile equipment, tools & machinery efficiently and accurately. Maintains clean work areas, machines and equipment. Ensures correct documentation is used and filled out as specified on inspection and test plans, work instructions and any quality documents. Ensures that all specified records are correctly taken, reviewed and approved. Ensures that work is carried out in a safe manner and that relevant Safety and Quality documentation is complete for the task in hand. Ensures all lifting equipment is correctly used, and prior to use confirms its current inspection status. Ensures all work under their control is properly protected against damage while in the workshop or on site and correctly packages equipment for transport to ensure protection against damage. Complete all online and classroom training sessions. Qualifications/Requirements Willingness and flexibility to travel locally when required on short notice including off hours call outs. Minimum 3 years of experience with maintenance, repair of electromechanical equipment. Computer proficiency in MS Word, Excel and general use. Solid communication, planning, technical and people skills Ability to demonstrate strict compliance to safety standards Able to work without supervision and able to execute tasks when engaged on solo basis Able to work in a team environment and cooperate with fellow workers. Ability to clearly communicate in writing and verbally in English is a must. Capable and qualified to perform field work. Desired Characteristics Maintains a consistently high standard of housekeeping Ensures proper use and storage of equipment and chemicals Works safely at all times Capable of creative thinking and quick problem solving Innovative Team player Self-motivated Job Type: Full-time License/Certification: Driver's License (Required) Willingness to travel: 25% (Preferred)

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities · Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. · Assemble equipment per engineered drawings or as instructed by others. · Inspect completed components for accuracy and functionality. · Maintain an orderly work area. · Properly maintain company supplied tooling. · Aid in developing of new procedures and improving existing procedures. · Must understand and comply with all safety rules and company policies of Weatherford. · Work assignments carried out to the highest quality level. · Performs any assembly type functions, using hand or power tools. · May operate both stationary and moving overhead cranes. · Operates any equipment needed to perform job. Experience & Education REQUIRED · 1-2 years prior assembly or manufacturing experience · Mechanical aptitude. · Ability to read blueprints and wiring diagrams PREFERRED · Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED · Good verbal communication skills. · Basic computer skills · Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations. Responsibilities * Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions * Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality * Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions * Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards * Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations * Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations * Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness * Provide technical support and training to field technicians and end-users as needed Qualifications * Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred * Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry * Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems * Familiarity with autonomous systems, marine navigation, and control systems is preferred * Strong analytical and problem-solving skills with attention to detail * Experience working with the DoD or government contracts is a plus Benefits * Medical Insurance: Comprehensive health insurance plans covering a range of services * Saronic pays 100% of the premium for employees and 80% for dependents * Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care * Saronic pays 99% of the premium for employees and 80% for dependents * Time Off: Generous PTO and Holidays * Parental Leave: Paid maternity and paternity leave to support new parents * Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses * Retirement Plan: 401(k) plan * Stock Options: Equity options to give employees a stake in the company's success * Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage * Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands * Ability to perform physically demanding work for extended periods of time, up to 12 hours/day * Frequently and repetitively, lift, push and carry up to 20 lbs. * The ability to carry 20 lbs. up and down stairs * Ability to work outside for an extended period of time * Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes * Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain * Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day * Climb and maintain balance on ladders, platforms, or other high structures * Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing * Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time * Exposures to hazardous materials and ability to follow waste handling/disposal procedures * Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Come join our team! We are a competitive employer offering medical, dental, vision and 401K match! This role will have the ability to assemble, trouble shoot, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures Maintain electrical equipment to meet regulatory codes at the country, state and federal levels Perform safety-related functions and other miscellaneous electrical functions Competent with configuration of VFD's Must possess demonstrated ability to safely utilize a forklift and high lift Knowledge and ability to troubleshoot PLC's Must be physically capable of performing work from ladders, scaffolds, and roofs to install, maintain or repair electrical wiring, equipment and fixtures Proficient in testing and troubleshooting electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and megaohmeters, to ensure compatibility and safety of system Utilizing systematic approach to trouble shooting and problem solving and avoid replacing parts. Technical Skills Basic Electricity & Electronics DC Equipment & Controls Batteries & DC Circuits· Single-Phase Motors Transformers & AC Circuits Three-Phase Systems Electrical Measuring Instruments Electrical Safety & Protection Electrical Troubleshooting Power Supplies Digital Logic Systems Input/Output Devices Ability to read Electrical Schematics and mechanical blueprints Ladder logic knowledge Variable Frequency Drives Programmable Logic Controllers Knowledge and prior experience with Hydraulics Qualifications High School diploma or equivalent Preferred Electrician License or two year electrical program Candidates will be required to pass a pre-employment background, drug and work screen Must be available to work 12 hour day and night shifts, weekends, call-outs and overtime

2551 Valmont Dr Brenham Texas 77833-5418 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. A Brief Summary of This Position The Electromechanical Technician 13 performs highly skilled technical work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment with a wide knowledge and high degree of proficiency. Responsibilities include new installations of equipment, major repairs and replacements. The technicians help perform electrical and mechanical troubleshooting and repair plant production equipment. Shift: 1st (Days) Monday through Friday 7am-3pm Starting Hourly Pay Rate: $31.46 Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions Troubleshoot electrical and electronic as well as hydraulic & pneumatic troubleshooting Service and maintain cranes, lathes, drills, presses, press brakes, shears, robots, tube mills, high frequency induction equipment, distribution equipment, CNC and NC equipment Perform diagnosis, testing, disassembly, inspecting, precise measuring, repair and re-assembly of plant equipment or components with limited instruction Perform pneumatic, hydraulic, mechanical, and electrical troubleshooting and repair plant production equipment as needed Responsible for installation of distribution equipment including gutters, disconnects, conduits and cables following UL and National Electrical Code Responsible for installation and repair of lighting up to 480V, repair of small fixtures, fans, and appliances while also assisting with repair of welders, wire feeds, plasma cutters, and motors over 110V Use trouble-shooting aids, such as digital VOM to interpret necessary readings Record labor and materials and report abnormal conditions and safety hazards Maintain a neat and orderly work area and perform general housecleaning tasks as needed May occasionally assist newer co-workers and technicians in lower level tiers with various tasks Operate all the hoists and forklifts in a safe and efficient manner Other duties as needed or assigned Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities) High school diploma or GED 2-3 years of relevant work experience The ability to climb and work at elevated heights of up to eighty feet The ability to work over ten hours a week in overtime when required for business needs One year of previous experience maintaining industrial equipment One year of previous experience using industrial lifting equipment, cranes or hoists One year of previous experience using at least one of the following troubleshooting aides: thermography gun, digital VOM, volt, ohm or amp meters The ability to accurately interpret electrical schematics, blueprints and National Electrical Code books for both AC & DC electrical systems The ability to read and understand hydraulic and pneumatic valves and prints Have the mechanical skills to fabricate electrical panels, cut and bend conduit, install the electrical equipment, pull wires, etc. that are common to the trade. A working knowledge of using Outlook email Math skills, addition, subtraction, multiplication, division and fractions are used to compute power, current, voltage, resistance, etc. Experience operating a forklift Experience welding and fabricating Self-starter requiring a minimum of supervision and direction Experience with pneumatic, hydraulic, and mechanical troubleshooting Highly Qualified Candidates Will Also Possess These Qualifications: 5+ years of relevant work experience Graduate of a technical school or apprenticeship program in a related field in Electrical Maintenance Knows and understands the various types of components used in an industrial environment such as disconnects, motor starters, relays, contactors, motors, transformers, switches (proximity and mechanical), timers, circuit protection, solenoids, etc. Understands the operation of welders and how to repair them. Requires knowledge of rectifiers and SCRs. Working Environment and Physical Efforts: Most of this job is performed in an indoor shop environment. The temperature range can be from 100 degrees in the summer to about 50 degrees in the winter. Most operations may expose employee to some type of disagreeable working conditions (wind, cold, heat, dust, dirt, fumes, noise, vibration, water, or oil). Working conditions may vary with specific work assignments. Some areas of the plant can be a noisy at times with sound levels reaching above 85 decibels. Hearing protection is available for those areas. Safety glasses and metatarsal safety shoes are required at all times in the plant. Gloves are required during certain operations. Face shield is required in addition to safety glasses when grinding. The employee will operate machines that use liquid coolant and may also be exposed to cast iron dust. The employees must be able to spend the entire work shift on their feet within the plant environment. Some outdoor work is required which includes work in conditions with abnormal temperatures. Employee works around material stacked overhead height. Conditions range from clean work to exposure to odors, fumes, drafts, wet conditions, dirt, grease, smoke, dust, noise, high temperatures and low frigid temperatures. These conditions range from severe to mild and can happen daily and in any combination. An Electromechanical Technician works in disagreeable weather conditions nearly 30% of the year. Employee must stand and walk, as well as handle parts, tools and equipment, gripping and grasping, on a frequent to constant basis. On an occasional to frequent basis, operator is required to lift/carry parts. Most weight moved is less than 30 lb. Although a few items do weigh more, a maximum lift of 50 lb. is all that is required. Standing, bending, pivoting, walking and reaching overhead are required during most of the shift. Climbing ladders, pulling wire through conduit, hanging fixtures and electrical components also requires a physical exertion. Lifting, carrying, bending, kneeling, stretching, crawling and working in awkward and/or confined positions is frequent with any electromechanical technician. Some of the physical tasks include hanging gearboxes on top of machines, changing brakes or the motors on cranes. Mental and Visual Effort The functions of this job require the employee to be alert at all times. Working in a fast-paced environment as well as the repetitious nature of this job requires both mental and visual concentration. The technician must be able to work quickly to repair plant equipment so operations can resume. There are often high stress situations where the technician needs to be able to work under adverse conditions for long periods of time using intense mental and visual concentration. Good hand to eye coordination with a good sense of depth perception is required at all time. Technicians need to be able to distinguish colors and be capable of reading manuals, schematics, labels, and other printed materials. Adequate hearing is required to diagnose problems with machines and equipment. Mental and visual concentration is needed to prevent injury to oneself, fellow workers and/or damage to the product. The use of any equipment or tools requires the employee to be alert at all times. If employee does not have a valid license from either of these states, the determination of acceptable vision will be made by the Safety Department on an individual basis. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

Job Description PRIMARY FUNCTION Under the guidance of the Maintenance Supervisor, the Electro-Mechanical Technician (EMT), supports operation, inspection, and maintenance processes from mechanical, electrical, and plumbing for all production equipment and systems within the facility. The position is responsible for repairing and installing advanced production/manufacturing equipment. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. May mentor and provide support to less experienced mechanics. Diagnoses equipment malfunctions and makes more complicated repairs or adjustments as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES Perform preventative maintenance on more advanced/sophisticated production equipment. Perform repairs on more advanced production equipment as needed. Perform breakdown analysis. Oversee or perform general housekeeping and upgrade production lines with new/upgraded equipment/technology. Direct activities of outside contractors working on assigned line. Change line for package changeovers. Enforce GMP, safety, and audit standards. Work independently under limited supervision (self-management) Documentation of work schedule and work tasks completed. Respond effectively to all emergencies. Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them. Complies with all policies for the safe storage, usage, and disposal of hazardous materials. Participate in ongoing technical, safety, and operational process training programs. Maintains a clean and safe work environment and maintains compliance with State, County, or City Ordinances, Codes, or Laws. Documents work performance and materials procurement as directed, using work order system. SUPERVISORY RESPONSIBILITIES N/A QUALIFICATIONS Minimum of a High School Diploma or equivalent. Associate' or Bachelor's Degree preferred. Ability to work flexible schedules/shifts/areas, including weekends, nights, and/or holidays. Experience working with computers and Microsoft Office (Including Outlook, Word, Excel). EXPERIENCES Completion of an applicable technical training program. 3+ years of applicable working experience in equipment maintenance, basic electrical and troubleshooting practices. 2+ years of experience in the operation and maintenance of a large-scale manufacturing facility Possess mechanical and electrical aptitude. A successful candidate must be self-motivated who can work independently or in a team. Ability to seek outside resources as needed. Excellent communication skills (orally and written LICENSURE: N/A KNOWLEDGE, SKILLS, AND ABILITIES Drives Performance: Holds self and others accountable for the achievement of performance expectations. Creates an environment that enables others to perform at their best. Acts Decisively: Makes and acts on decisions quickly and effectively and fosters the same in others. This is based on an underlying courage to enable risk-taking for the business. Project Management: Ability to manage, prioritize and lead numerous projects simultaneously. Impactful Insights: Demonstrates ability to pull together insights from a variety of sources and develop strategic guidance for brand teams that result in a business decision or action Collaboration: Demonstrated communication and teamwork skills; ability to gain consensus and act within a matrix team environment; ability to work in a collaborative and influencing fashion that drives to business action. TYPICAL WORKING CONDITIONS Incumbent must be able to operate a computer. Lift/carry 40lb. or less, push/pull 12lbs. or less. Stooping, bending, stretching, and reaching outward and over their head. This position may require extended periods of sitting, standing, and walking. Personal Protective Equipment (PPE) when necessary. May require travel. Associates will be required to take all appropriate training classes as required. Willingness to cross-train into other departments.