Assembly technician jobs in El Paso, TX

Job Description Lesna Construction is currently seeking a Maintenance Mechanic / Technician to be responsible for maintaining, troubleshooting, and repairing all machinery (Backhoes, Excavators, Lifts, etc..). Maintain all vehicles both regular, diesel and small engine motor experience required. MUST HAVE A GOOD DRIVING RECORD. Preferred employee to be bilingual, but not required. Will work 40-hour work weeks, with the occasional overtime but this is dependent upon a heavy project load. Salary to be determined based on experience.

Under general supervision, the Part-time Production Technician is responsible for the maintenance, set-up, take down and storage of production equipment in support of client needs; to include video, audio, lighting and special effects equipment for The El Paso Convention Center, Abraham Chavez Theater, Plaza Theatre, Philanthropy Theatre, McKelligon Canyon, and other venues managed by Destination El Paso/Legends Global. The following are typical for this position. The position may not perform all of these, and/or may perform similar related tasks not listed here. Maintain and monitor facility inventory related to technical services. Read and interpret equipment performance charts and control equipment to evaluate the efficiency of each system. Investigate, analyze and resolve operational and maintenance problems; develop and implement preventive maintenance program for all facility electronic equipment. Demonstrate proper knowledge and use of procedures, techniques, machines, materials, equipment and tools used in technical construction, operation and maintenance of facility audio, visual and other systems. Possess knowledge and experience in operational procedures, facility capabilities, industry terminology, event-related services, and technical requirements for the type of events anticipated at the facility. Must possess a thorough understanding of facilities audio, visual displays and other systems. Know laws, codes, ordinances, policies, procedures, safety precautions, rules/regulations and emergency procedures are followed. Maintain an effective working relationship with clients, employees, exhibitors, patrons, and others encountered in the course of employment. Follow oral and written instructions and communicate effectively with others in both oral and written form. Organize and prioritize work to meet deadlines. Work effectively under pressure and/or a stringent schedule and produce accurate results. Other duties as assigned. EDUCATION AND WORK EXPERIENCE Must have high school diploma or GED. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee may be required to work both indoors and outdoors as required by the function. Must have the physical ability to maneuver around facility at times, walking and/or standing from 8-14 hours daily as well as the ability to frequently lift in excess of 50 not more than 100 pounds. This position is also exposed to adverse conditions including weather, noise, dust, fumes etc. Must be able to work safely in high positions. Must have valid driver's license. HOURS OF WORK Ability to work flexible hours based on events, including daytime, evening, weekends and holidays as needed. NOTE: The essential responsibilities of this position are described under the headings above. They may be subject to change at any time due to reasonable accommodation or other reasons. Also, this document in no way states or implies that these are the only duties to be performed by the employee occupying this position. This position offers a competitive salary. Please send a copy of your most recent resume. Applicants that need reasonable accommodation to complete the application process may contact- ************ Legends Global is an Equal Opportunity/Affirmative Action employer, and encourages Women, Minorities, Individuals with Disabilities, and protected Veterans to apply. VEVRAA Federal Contractor

General Assembler Duration : 12 Months contract Total Hours/week : 40.00 3rd Shift Client: Medical Devices Company Level Of Experience: Entry Level Employment Type: Contract on W2 (Need US Citizens Or GC Holders Only) Job Description: At the client Pharmaceutical Company, what matters most is helping all people live healthy lives. We focus on treating, curing and preventing some of the most devastating and complex diseases of our time. And we pursue the most promising science, wherever it might be found. Our mission drives us. Our patients inspire us. We collaborate with the world for the health of everyone in it. Thriving on a diverse company culture, celebrating the uniqueness of our employees and committed to inclusion. Proud to be an equal opportunity employer. Under direct supervision, trains to perform duties related to the preparation and manufacture of active pharmaceutical ingredients, intermediates, and/or medical devices in accordance with standard operating procedures, as regulated by quality, environmental, and safety agencies (FDA, OSHA, etc.). Responsibilities: Responsible for operation of machines and/or processes related to ampoule manufacturing (glass cutting, bottoming and ampoule filling). Seeking personnel with agility and confidence in working with glass and flammable liquids. Responsible of completing required documentation (such as batch records, returns, etc.). Possess a basic understanding of production processes within area of assignment and a working knowledge of manufacturing equipment. Operate equipment in accordance to applicable manufacturing instructions/ operating procedures including machine set-ups and parameter documentation. Flexibility in working with potentially hazardous materials (such as glass and flammable solutions). Follow GMP's and standard operating procedures. Follow process and utility flow diagrams. Transport materials of varying weight in accordance with established safety guidelines using material handling equipment and additional assistance as required. Perform area safety inspections to identify safety hazards and report findings in accordance with company protocols. Demonstrates adherence to safety procedures by monitoring personal and peer behaviors, work environment and housekeeping. Participate in internal audits and support additional team activities as requested. Participate on site investigative teams and where applicable, QN's and behavioral safety assessments. Correct and/or mitigate findings from assessments. Provides overtime as needed Performs all duties with attention to quality, safety and environmental matters. Items include: wearing appropriate personal protective equipment, recognizing, reporting, and appropriately responding to hazards in the work area (spills/accidents/near misses), maintaining proper housekeeping at all times, and properly labeling and storing chemicals. Carries out duties in compliance with all state and federal regulations and guidelines including FDA, ISO, and OSHA. Complies with all company and site policies and procedures. Assume responsibility for the environmental effects of work performed and for the identification and recording of environmental problems as they arise. Follow all applicable aspects of the site Environmental Management System as it pertains to normal job duties. Complete all regulatory training as assigned (GPM, s, ISO14001, OSHA, etc.). Complete Operator Training Program according to established guidelines. Be available for other projects or assignments as requested by management. Continuously looks for ways to simplify or improve products, services, systems, and processes to achieve business goals, e.g., improve yield, cycle time, quality, and productivity. Makes a positive contribution through demonstration of ability to seek out assistance from co-workers as needed; to suggest ways to improve upon current operations practices and systems; and to learn new skills, procedures and processes Qualifications High School Diploma or GED required 12 months of work experience in a manufacturing environment is required Work experience in chemical, pharmaceutical, or industry that complies with GMP is highly preferred. Must be able to read, write, and understand Basic English. Operating skills of manufacturing equipment, tools, and hand/fork lifts is preferred Basic PC navigation such as the ability to enter data into programs/software applications as instructed and use software applications for mail, word processing, spreadsheets and other job specific needs is preferred. Ability to communicate and effectively work as part of a team is required.

FXI is a leading producer of foam innovation in the Bedding, Furniture, Industrial, Home & Office, Healthcare, and Transportation markets. We have made it our mission to provide tailored solutions that delight our customers and consumers. With our corporate headquarters, high-tech research and development facility, and multiple manufacturing locations in North America, FXI has built a culture of innovation and achievement that is recognized by customers, suppliers and peers. Our products include finished goods, sub-assemblies, services, and raw materials for OEMs, fabricators, and retailers. You will find FXI's foam innovations inside, around, and under yourself in countless applications. Everywhere foam goes, FXI's innovations lead the way! Won't you join us? Responsibilities: Qualifiations:

Pay: $11.00/hr Shift: Mon-Sat, 7:00AM-3:30PM Looking for entry-level assemblers to work in a light industrial setting assembling plastic or small metal parts. No experience needed-just bring reliability and focus. Snap, glue, or screw parts into place Quality check your own work Help with packaging and labeling Keep work area clean and stocked

Job Description Magrym Consulting Inc. is seeking a qualified Construction Materials Testing (CMT) Technician in Midland, Texas. As a growing company, technicians will have the opportunity to grow with us. Candidates should be willing to work overtime and weekends as required. Duties include: Soil and Aggregate Sampling Logging materials Perform Aggregate, Soil and Concrete Testing Lab and Field work Follow ASTM and AASHTO Standards Software data entry Geotechnical sample logging Maintaining a clean working environment Accurate recording of timesheets Daily travel to and from construction sites, generally within 100 miles from the home office The ability to train to achieve minimum certificates in ACI, NICET, and/or State Testing Certificates within 6 months of hire Ability to work outside in the vicinity of large construction equipment Ability to utilize hand tools such as sledgehammers, shovels and picks Observing and documenting field activities Maintain equipment and lab vehicles In-house equipment verification General Skills: Attention to detail Basic Math, Microsoft Suite skills Excellent communication with internal and external clients General maintenance skills Strong safety focus Physical Requirements: Ability to lift 60+ lbs Stand in one place for 1 to 2 hours at a time Ability to wear appropriate PPE for hazardous materials Wear steel toe shoes as needed Ability to work indoors and outdoors in all weather conditions Ability to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl. At times, this position may be working at or on uneven terrain, varying heights, in confined spaces, or supported trenches. Requirements High School Diploma or equivalent Valid Texas Drivers License Clean driving record ACI Field Technician Certification (preferred) ACI Laboratory Technician Certification (preferred) ACI Aggregate Base Testing Technician Certification (preferred) Ability to pass a pre-employment/random drug test Associates or Bachelor degree in Civil Engineering, Architecture or Construction is a plus Benefits Dental insurance Health insurance Life insurance On-the-job training Paid time off Paid Holidays Paid training 401K Retirement plan Vision Insurance Dental Insurance Short Term/Long Term Disability

If you enjoy working on high profile and challenging engineering projects supporting the US Army, Serco has a great opportunity for you! The Engineering Technician will be part of a dynamic team at our Fort Bliss, Texas location. Bring your expertise and collaborative skills to make an impact towards our military defense and safety of our Soldiers. This position is contingent upon your ability to transfer/maintain a Secret clearance. Serco supports the US Army as a prime contractor for their Next Generation Command and Control (NGC2) contract which supports implementing capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, and maintains modern and mobile solutions for an integrated CP infrastructure. You will be part of a team that works closely with the customer and other Serco functional area teams to deliver quality systems and associated supporting documentation. The team has been recognized by the Army Customer and the industry for their outstanding contributions to the contract and program. In this role, you will: Plan and perform routine and non-routine hardware assembly and integration assignments of substantial variety and complexity that are typically part of broader assignments. Construct components, subunits, or simple models; adapt standard equipment; troubleshoot and correct malfunctions Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment Conduct tests or experiments requiring selection and adaptation or modification of a wide variety of critical test equipment and test procedures, prepare and operate equipment, record data, measure and record problems of significant complexity that sometimes require resolution at a higher level, and analyze data and prepare test reports Extract and compile a variety of engineering data from field notes, manuals, lab reports, etc., process data, identify errors or inconsistencies, select methods of data presentation Apply methods outlined by others to limited segments of research and development projects, construct experimental or prototype models to meet engineering requirements; conduct tests or experiments and redesigns as necessary and record and evaluate data and report findings Review or develop designs by extracting and analyzing a variety of engineering data, applying conventional engineering practices to develop, prepare, or recommend schematics, designs, specifications, electrical drawings and parts lists Serve as a prototype systems and network data collector/analyst during the customer's testing and assessments Qualifications To be successful in this role, you must have: Ability to obtain an interim secret clearance with the ability to obtain/maintain a Secret clearance. 3 years of relevant experience An Associate's degree in a specialized professional engineering and/or STEM curriculum (an Associate's Degree in Computer Networking highly preferred) A High School Diploma/GED and 2 additional years of relevant experience will be considered in lieu of education Ability to develop system-of-systems integration plans to include developing modification designs for new equipment installation. Ability to travel up to 25% of the time. Additionally preferred experience and skills: Experience with military vehicles Troubleshooting and correcting network errors/faults during design, fabrication, assembly, configuration, and integration phases Experience with C4ISR If you are interested in supporting and working with our military and a passionate Serco team, then submit your application now for immediate consideration. It only takes a few minutes and could change your career! Company Overview Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************. Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

Looking for an opportunity to work with a talented team and expand your experience in supporting Weapons Test and Evaluation (T&E) projects? SSI needs to add an Engineer Technician II to support our current list of services provided to the U.S. Navy. These positions, located at the White Sands Missile Range (WSMR) in White Sands, New Mexico, will provide engineering, technical, logistics, and administrative support in the planning, maintenance, preparation, execution, launch operations and post-test phases to the W Department of the Navy Surface Warfare Center, Port Hueneme Division (NSWC PHD). Primary Functions: This is a junior level Engineering Technician position; incumbent with guidance from more senior engineering technicians will: Assemble electrical and electronic systems and prototypes. Assist with installing and maintaining electrical equipment and modify electrical prototypes, parts, and assemblies to correct problems. Assist with building or modifying prototypes from rough sketches or plans Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics. Identify and resolve equipment malfunctions, working with manufacturers to resolve issues. Assist with launcher systems in order to maintain program launch capabilities. Assist with design work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment such as complex launch systems to include stationary and mobile launchers. Assist with installation, maintenance, system upgrades, troubleshooting, replacement, and repairs of all facilities, infrastructure, vehicles, new/existing equipment, and tools. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: High School Diploma or equivalent with an additional two years of related experience. Experience in: Installing, operating, testing, and evaluating various weapon systems, equipment, and components Ability to independently plan and accomplish complete projects or studies of broad scope and complexity, Ability to climb and work at elevated heights of up to eighty feet. Ability to interpret basic electrical schematics and blueprints. Ability to understand basic hydraulic and pneumatic systems. Driver's License Able to deploy to both CONUS and OCONUS CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in May of 2023. Must possess a valid driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

Job DescriptionDescription: Position Type: Non-Exempt, Part-Time, On-Call Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in Range operations and maintenance (O weapons testing; facilities management; aerial, ground and seaborne targets O technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business. We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 36-year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost-effective results while achieving complete customer satisfaction. We are currently looking to hire Engineering Technicians on a part-time, on-call basis at our White Sands Missile Range Base Camp in Orogrande, NM to support our unit rotations schedule. The frequency of the work is 9-10 times a year for about 1500 hours, many of which are overtime hours. Our Surge Technicians work 12 consecutive days during unit rotations and we support approximately 9-10 rotations a year at the Whites Sands Missile Range location. As a surge technician, your duties include (but are not limited to): Providing support of test events on military ranges which requires a knowledge of military protocol and standard operating procedures during FTX events. Applying technical knowledge of electrical, mechanical, and computer skills in support of operations and routine maintenance on EW & Radar systems and their peripheral equipment. Setting up EW & Radar systems at remote locations, operating the systems in support of test missions, and tearing down the systems once testing is completed. Work includes cross-utilization into other positions that fall within their scope of work. Working in a dynamic, fast-paced environment of military test events. The Engineering Technician IV performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. Work Conditions: Conditions will vary as most work will be accomplished outdoors. Must be able to work outside on the range throughout the year where temperatures and weather conditions will vary. Physical requirements include: 45% standing, 25% walking, 20% sitting, 5% reaching, 5% lifting, 10% crouching in tight spaces (inside unit vehicle), and you must be capable of lifting 50-100 pounds independently or with assistance from others. This is a part-time on-call position and shift hours vary with mission requirements. Must be able to work all shifts, weekends, holidays and overtime as needed when called in, sometimes on short notice, to support test missions. Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned. Due to real-world war-time environments, must be able to handle combat simulation and maneuvering exercises. May be subjected to loud noises including explosive devices, live gun fire/ammunitions firing war-time simulation, and loud noise generated from inside military vehicles during missions, troop support, and while working on range. Requirements: Education/Experience/Skills: High School diploma or equivalent. 10+ years of electrical and mechanical system maintenance and repair experience. 5+ years of maintenance supervisor/maintenance lead/maintenance planning experience. 3+ years of RF maintenance and repair experience. Must have radar operation experience. Must have working knowledge of Network/Computer operations & maintenance. Experience working at a government facility helpful, but not required. Ability to obtain a Forklift Operator license. Proficiency in Microsoft Office Suite to include Excel, Word, Internet Explorer. Ability to input data into various user interface applications, ability to save and transfer data via USB sticks, CDs, hard drives, or other storage devices, and knowledgeable with networking and component configuration set-up and troubleshooting. Must have strong working knowledge and the ability to use hand tools and technician diagnostic equipment to include digital multi meters, power meters, power drills, wrenches, screw drivers, etc. Work experience as a technician in any of the following fields is considered a plus: Mechanic, Electrician, Communication System Repairman, or Hydraulic/Pneumatic System Repairman. Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment. U.S. Citizenship required and you must be able to obtain a U.S. DoD Security Secret Clearance prior to start date and maintain a Secret clearance throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. Supporting Our Warfighters: As a highly regarded and long-established DoD employer, SA-TECH recognizes that our success is indicative of our team members' hard work and dedication towards a common goal… Supporting our Warfighters. Along with unparalleled stability, we have the ingredients for superior performance with a servant leadership mentality that provides an affirmation of purpose and value in a team-oriented positive work environment. As such, we provide a sense of family, competitive pay and employee benefits, along with a strong commitment to the professional development of our workforce and for providing broad career opportunities throughout the United States. SA-TECH offers: Employee Recognition Above-Average Compensation Competitive Benefits Ongoing Training and Development Career Advancement Opportunities Benefits Offered: Medical, Dental, Vision Life Insurance Long-Term Disability 401(k) match Flexible Spending Accounts EAP Education Assistance PTO and Holidays Vacation and Sick Leave Other Important Information You Should Know: By applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills. SA-TECH offers flexible work schedules depending on the program, alongside generous PTO benefits. We are an Equal Opportunity/Affirmative Action employer and evaluate all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected Veteran status. We participate in the E-Verify system to verify work authorization in the U.S. Applicants are encouraged to apply within 5-15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work-life balance and our pay and benefits aim to enhance employee well-being. If this culture resonates with you, we invite you to apply. If you're uncertain about your fit, please explore other roles on SA-TECH Careers. All responses will be handled with strict confidentiality. ** Please note that any provided salary information is a general guideline. SA-TECH considers factors such as (but not limited to) scope and responsibilities of the position, the candidate's work experience, education, training, and skills as well as market and business considerations when extending offers.

Job Description Job Title: Engineering Technician Build a Meaningful Career with Impact Are you a detail-oriented, hands-on professional looking for an opportunity to support innovative engineering projects? At Bohannan Huston, we are looking for an experienced Engineering Technician to join our team in our Las Cruces office. If you are passionate about contributing to projects that make a real difference in community development and planning, we encourage you to apply today! Your Role & Responsibilities In this role, you will contribute to: Technical Support - Assist engineers with project setup, design workflows, and plan production to ensure efficient project execution. Drafting & Design - Support engineering teams in the design of civil infrastructure projects, including site development, roadways, water and wastewater utilities. Field Work & Data Collection - Conduct field visits to gather site data and verify completed projects through as-built documentation. Project Documentation - Help prepare construction documents, project reports, and drawings in accordance with specifications and regulatory standards. Design Software Application - Utilize one or more design software platforms (such as AutoCAD or Civil 3D) to assist in creating high-quality, accurate design deliverables. Quality Assurance - Review field data and design outputs to ensure accuracy, consistency, and compliance with industry standards. What We Are Looking For Professional Experience - 2 years minimum experience in civil engineering, surveying, or a related technical field. Academic Excellence -- You have graduated with a high school/equivalent plus a civil technology or survey technology degree, or a related technical field. Technical Proficiency - You are fluent in AutoCAD Civil 3D software on site development grading and drainage plan production, pipeline alignments, and roadway alignments and grading. You have knowledge and capabilities in the use of ArcGIS. Attention to Detail - Strong ability to review technical data, ensure accuracy in designs, and identify potential issues before they impact the project. Strong Communication Skills - Ability to communicate technical concepts effectively, both written and verbally, and work collaboratively with diverse teams. Problem-Solving Mindset - An innovative thinker who can troubleshoot and resolve technical challenges in the field and the office. Commitment to Safety - Experience working in compliance with safety standards and maintaining a safe work environment. Technologies You Will Work With & Learn AutoCAD Civil3D ArcGIS Why Choose Bohannan Huston? At Bohannan Huston, we are dedicated to delivering sustainable engineering solutions and creating an inclusive work environment that promotes personal and professional growth. You will have the opportunity to work on innovative, high-impact projects alongside an experienced and supportive team. Why Las Cruces, New Mexico? Las Cruces provides affordable living, stunning desert landscapes, and a relaxed lifestyle. With a growing community and border region, it is an ideal location to expand your career. What We Offer Professional Development - Access to mentorship, training, and hands-on technical experience. Work-Life Balance - Three weeks of flexible leave plus an additional week off during the winter break to support personal and professional well-being. Comprehensive Benefits - Medical, dental, and vision insurance, plus an HSA with company contributions. Financial Security - A 401(k) retirement plan with a competitive company match. Award-Winning Workplace - Recognized as a Top Workplace and ENR Top 500 Firm since 1998. Take the Next Step in Your Career If you are excited to join a collaborative team, contribute to meaningful engineering projects, and develop your skills in a supportive environment, we encourage you to apply today! Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. Job Posted by ApplicantPro

Eaton's ES AMER ARS PDCAD division is currently seeking a Assembler I (Weekend Shift) - EP1. The hourly rate for this position is $16.22 per hour. The hours for this shift are 6:00 am - 6:30 pm. is also eligible for a variable incentive program. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Assembler I is responsible for a wide range of skills including wiring, assembling, fitting, and mounting subassemblies, components, and standard fixed assemblies in electrical control equipment. Perform assembly or wiring required for test preparation and final inspection. Use established power-checking procedures and equipment to verify the electrical/mechanical integrity of units assembled. Perform all assignments within the acceptable quantity and perfect quality requirements in keeping with assigned functions. In this function, you will: * Perform the assigned function from oral and/or written instructions, drawings, or other manufacturing information. * Handle materials following established procedures. * Perform routine maintenance on all plant equipment in the area of assignment as required. * Maintain quality standards by inspecting and testing finished products to ensure conformance with specifications and codes. * Maintain expected progress of jobs in the area of assignment and communicate problem areas or parts shortages. * Handle all finished products for shipment; call carriers and load materials into carrier's vehicles. * Observe good housekeeping and safety procedures and keep equipment, tools, and the work area clean and orderly by performing 5-S duties and continuing to dedicate yourself to raising the bar. * Lift 35 lbs. with reasonable accommodation as required. Qualifications: Required (Basic) Qualifications: * No relocation benefit is offered for this position. Only candidates residing within the immediate area of the Eaton El Paso, TX facility (50-mile radius) will be considered for this position. Active-Duty Military candidates are exempt from the geographical area limitation * Legally authorized to work in the United States without company sponsorship. * High school diploma or GED from an accredited institution. * 1 year of prior manufacturing or assembly experience. * Basic computer skills and use of software application(s) is required. * Available to work overtime when required. Preferred Qualifications: * Degree in a technical discipline. * Forklift operation certification. * Experience with supply chain systems (AS400, MAPICS). * Experience in electrical equipment manufacturing and assembly (panelboards/switchboards preferred). * Experience in electrical equipment maintenance/installation. Skills: Position Criteria: * Experience using various tools, including Manual/electric/pneumatic tools, drill press, press brake, fork truck, jib crane, template/fixtures, hand carts, measuring and testing equipment, storage/packaging materials, and prescribed safety equipment. * Must be able to interact and contribute in a small team environment. * Know and follow established job-specific and facility-wide health and safety procedures and rules. * Bring health and safety issues, unsafe acts, and safety suggestions to management's attention or correct those they can. * Participate in accident, injury and illness prevention activities. * Develop job safety analysis and safe working procedures. * Identify and correct hazards and unsafe conditions. * Accident, near-miss accident, or potential hazard investigations. * Keep other employees aware of health and safety practices and activities by observing fellow employees' work practices and incorporating safety. * Maintain housekeeping in the work area. * Maintain health and safety equipment in good working order. * Participate in health and safety training. * Participate in providing suggestions for the improvement of the health and safety program. * Know and implement regulatory compliance requirements in their work area. * Wear and maintain required applicable task-specific PPE (personal protective equipment). * Wear required eye protection and steel-toe shoes on the shop floor We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Lesna Construction is currently seeking a Maintenance Mechanic / Technician to be responsible for maintaining, troubleshooting, and repairing all machinery (Backhoes, Excavators, Lifts, etc..). Maintain all vehicles both regular, diesel and small engine motor experience required. MUST HAVE A GOOD DRIVING RECORD. Preferred employee to be bilingual, but not required. Will work 40-hour work weeks, with the occasional overtime but this is dependent upon a heavy project load. Salary to be determined based on experience. JOB CODE: Machine Technician

Performs any combination of tasks involved in the fabrication, manufacture, assembly, testing and packaging of medical devices as well as setting up, operating, performing maintenance on and troubleshooting equipment. May conduct quality inspections on processing line in accordance with quality specifications. Works within clearly defined SOPs and / or scientific methods and adheres to quality guidelines. Qualifications & Skills: High school diploma or equivalent. Zero (0) to one (1) year of manufacturing assembly experience. Effective communication skills at a level co-workers and Team Lead/Supervisor can understand. Ability to read, writes, interpret and comprehend specifications written in English and perform basic math calculations. Ability to use basic tools of measurement, such as microscopes. Must be able to work flexible and/or extended hours and report to work on a regular, punctual basis. Has good attention to detail Ability to get along with people and be able to work in a team environment. Willingness to rotate into different tasks and responsibilities. Physical Demand: While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended periods of time. Occasionally the employee may be required to lift or move at least 50 pounds. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

If you enjoy working on high profile and challenging engineering projects supporting the US Army, Serco has a great opportunity for you! The Engineering Technician will be part of a dynamic team at our Fort Bliss, Texas location. Bring your expertise and collaborative skills to make an impact towards our military defense and safety of our Soldiers. This position is contingent upon your ability to transfer/maintain a Secret clearance. Serco supports the US Army as a prime contractor for their Next Generation Command and Control (NGC2) contract which supports implementing capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, and maintains modern and mobile solutions for an integrated CP infrastructure. You will be part of a team that works closely with the customer and other Serco functional area teams to deliver quality systems and associated supporting documentation. The team has been recognized by the Army Customer and the industry for their outstanding contributions to the contract and program. In this role, you will: Plan and perform routine and non-routine hardware assembly and integration assignments of substantial variety and complexity that are typically part of broader assignments. Construct components, subunits, or simple models; adapt standard equipment; troubleshoot and correct malfunctions Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment Conduct tests or experiments requiring selection and adaptation or modification of a wide variety of critical test equipment and test procedures, prepare and operate equipment, record data, measure and record problems of significant complexity that sometimes require resolution at a higher level, and analyze data and prepare test reports Extract and compile a variety of engineering data from field notes, manuals, lab reports, etc., process data, identify errors or inconsistencies, select methods of data presentation Apply methods outlined by others to limited segments of research and development projects, construct experimental or prototype models to meet engineering requirements; conduct tests or experiments and redesigns as necessary and record and evaluate data and report findings Review or develop designs by extracting and analyzing a variety of engineering data, applying conventional engineering practices to develop, prepare, or recommend schematics, designs, specifications, electrical drawings and parts lists Serve as a prototype systems and network data collector/analyst during the customer's testing and assessments Get to know your recruiter: Qualifications To be successful in this role, you must have: A Current DOD Secret clearance 3 years of relevant experience An Associate's degree in a specialized professional engineering and/or STEM curriculum (an Associate's Degree in Computer Networking highly preferred) A High School Diploma/GED and 2 additional years of relevant experience will be considered in lieu of education Experience with the integration of Army Tactical C4ISR systems and vehicle platforms Ability to develop system-of-systems integration plans to include developing modification designs for new equipment installation. Ability to travel up to 25% of the time. Additionally preferred experience and skills: Experience with military vehicles Troubleshooting and correcting network errors/faults during design, fabrication, assembly, configuration, and integration phases Experience with C4ISR If you are interested in supporting and working with our military and a passionate Serco team, then submit your application now for immediate consideration. It only takes a few minutes and could change your career! In compliance with state and local laws regarding pay transparency, the hourly range for this role is $5.00 to $96.15; however, Serco considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Company Overview Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************. Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

Looking for an opportunity to work with a talented team and expand your experience in supporting Weapons Test and Evaluation (T&E) projects? SSI needs to add an Engineer Technician VI to support our current list of services provided to the U.S. Navy. These positions, located at the White Sands Missile Range (WSMR) in White Sands, New Mexico, will provide engineering, technical, logistics, and administrative support in the planning, maintenance, preparation, execution, launch operations and post-test phases to the W Department of the Navy Surface Warfare Center, Port Hueneme Division (NSWC PHD). Primary Functions: Develop, execute and assist with design work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment such as complex launch systems to include stationary and mobile launchers. Develop specialized design and weight test procedures in support of various launch systems and ordnance handling ground support equipment with wide knowledge and a high degree of proficiency. Design, implement and assist engineers in the modifications of various target designs, missile and rocket control systems, missile and rocket launchers, develop and execute precise hydraulic, static and electronic test equipment. Generate drawings to include various industry and Navy design factors. Guides troubleshooting of electronic, electrical, & mechanical systems that do require considerable judgment and final diagnostic. Identify solutions to technical design problems that arise during design, fabrication, and checkout of electrical systems Inspect designs for quality control, report findings, and make recommendations Draw diagrams and write specifications to clarify design details of experimental electronics units Build or modify prototypes from rough sketches or plans Redline technical data package (manuals, procedures, drawings...) to reflect changes in design or implementation. Perform highly skilled technical work in areas of installation, maintenance, and repair of mechanical equipment with a wide knowledge and high degree of proficiency. Operate various industrial lifting equipment, man-lifts, overhead cranes, hoists, and forklifts in a safe and efficient manner. Use troubleshooting aids such as oscilloscopes and digital VOM's to accurately interpret readings. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: An Associates level degree or an equivalent military/work experience combination in the field of science, engineering or mathematics. For equivalency purposes: Ten (10) years of service with an appropriate military Naval Enlisted Code, Military Occupational Specialty, and preferred grade at departure is desired to be no less than E6. Five (5) years professional experience in electrical/electronics systems. Ability to climb and work at elevated heights of up to eighty feet. Ability to complete necessary training required to pass the Navy Ordnance Board as a safety observer. Proficiency with computers and ability to work with Microsoft Word and Excel. Proficient with AutoCAD and Solid Works. Driver's License Knowledge of WSMR operations Able to deploy to both CONUS and OCONUS Minimum of one year of previous experience operating and maintaining industrial lifting equipment, forklifts, man-lifts, cranes, and hoists. The following qualifications are desired: Familiarity with the implementation of Navy Fire Control Systems and Navy Vertical Launching Systems. Skill in launching systems, ordnance operations, and knowledge in installing and maintaining ship and land-based systems used in a test and evaluation environment. CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in May of 2023. Must possess a valid driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

Position Type: Non-Exempt, Part-Time, On-Call Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in Range operations and maintenance (O&M); weapons testing; facilities management; aerial, ground and seaborne targets O&M; technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business. We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 36-year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost-effective results while achieving complete customer satisfaction. We are currently looking to hire Engineering Technicians on a part-time, on-call basis at our White Sands Missile Range Base Camp in Orogrande, NM to support our unit rotations schedule. The frequency of the work is 9-10 times a year for about 1500 hours, many of which are overtime hours. Our Surge Technicians work 12 consecutive days during unit rotations and we support approximately 9-10 rotations a year at the Whites Sands Missile Range location. As a surge technician, your duties include (but are not limited to): Providing support of test events on military ranges which requires a knowledge of military protocol and standard operating procedures during FTX events. Applying technical knowledge of electrical, mechanical, and computer skills in support of operations and routine maintenance on EW & Radar systems and their peripheral equipment. Setting up EW & Radar systems at remote locations, operating the systems in support of test missions, and tearing down the systems once testing is completed. Work includes cross-utilization into other positions that fall within their scope of work. Working in a dynamic, fast-paced environment of military test events. The Engineering Technician IV performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. Work Conditions: Conditions will vary as most work will be accomplished outdoors. Must be able to work outside on the range throughout the year where temperatures and weather conditions will vary. Physical requirements include: 45% standing, 25% walking, 20% sitting, 5% reaching, 5% lifting, 10% crouching in tight spaces (inside unit vehicle), and you must be capable of lifting 50-100 pounds independently or with assistance from others. This is a part-time on-call position and shift hours vary with mission requirements. Must be able to work all shifts, weekends, holidays and overtime as needed when called in, sometimes on short notice, to support test missions. Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned. Due to real-world war-time environments, must be able to handle combat simulation and maneuvering exercises. May be subjected to loud noises including explosive devices, live gun fire/ammunitions firing war-time simulation, and loud noise generated from inside military vehicles during missions, troop support, and while working on range. Requirements Education/Experience/Skills: High School diploma or equivalent. 10+ years of electrical and mechanical system maintenance and repair experience. 5+ years of maintenance supervisor/maintenance lead/maintenance planning experience. 3+ years of RF maintenance and repair experience. Must have radar operation experience. Must have working knowledge of Network/Computer operations & maintenance. Experience working at a government facility helpful, but not required. Ability to obtain a Forklift Operator license. Proficiency in Microsoft Office Suite to include Excel, Word, Internet Explorer. Ability to input data into various user interface applications, ability to save and transfer data via USB sticks, CDs, hard drives, or other storage devices, and knowledgeable with networking and component configuration set-up and troubleshooting. Must have strong working knowledge and the ability to use hand tools and technician diagnostic equipment to include digital multi meters, power meters, power drills, wrenches, screw drivers, etc. Work experience as a technician in any of the following fields is considered a plus: Mechanic, Electrician, Communication System Repairman, or Hydraulic/Pneumatic System Repairman. Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment. U.S. Citizenship required and you must be able to obtain a U.S. DoD Security Secret Clearance prior to start date and maintain a Secret clearance throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. Supporting Our Warfighters: As a highly regarded and long-established DoD employer, SA-TECH recognizes that our success is indicative of our team members' hard work and dedication towards a common goal… Supporting our Warfighters. Along with unparalleled stability, we have the ingredients for superior performance with a servant leadership mentality that provides an affirmation of purpose and value in a team-oriented positive work environment. As such, we provide a sense of family, competitive pay and employee benefits, along with a strong commitment to the professional development of our workforce and for providing broad career opportunities throughout the United States. SA-TECH offers: Employee Recognition Above-Average Compensation Competitive Benefits Ongoing Training and Development Career Advancement Opportunities Benefits Offered: Medical, Dental, Vision Life Insurance Long-Term Disability 401(k) match Flexible Spending Accounts EAP Education Assistance PTO and Holidays Vacation and Sick Leave Other Important Information You Should Know: By applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills. SA-TECH offers flexible work schedules depending on the program, alongside generous PTO benefits. We are an Equal Opportunity/Affirmative Action employer and evaluate all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected Veteran status. We participate in the E-Verify system to verify work authorization in the U.S. Applicants are encouraged to apply within 5-15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work-life balance and our pay and benefits aim to enhance employee well-being. If this culture resonates with you, we invite you to apply. If you're uncertain about your fit, please explore other roles on SA-TECH Careers. All responses will be handled with strict confidentiality. ** Please note that any provided salary information is a general guideline. SA-TECH considers factors such as (but not limited to) scope and responsibilities of the position, the candidate's work experience, education, training, and skills as well as market and business considerations when extending offers.

Assembler Duration : 12 Months Total Hours/week : 40.00 3 rd Shift Client: Medical Device Company Job Category: Industrial Level of Experience: Entry Level Employment Type: Contract on W2 (Need US Citizens or GC Holders Only) 3rd Shift :10:00 pm to 6:00am (Mon-Fr) Job Description: Under direct supervision, trains to perform duties related to the preparation and manufacture of active pharmaceutical ingredients, intermediates, and/or medical devices in accordance with standard operating procedures, as regulated by quality, environmental, and safety agencies (FDA, OSHA, etc.). Responsibilities Possess a basic understanding of production processes within area of assignment and a working knowledge of manufacturing equipment. Follow GMP, s and standard operating procedures. Transport materials of varying weight in accordance with established safety guidelines using material handling equipment and additional assistance as required. Demonstrates adherence to safety procedures by monitoring personal and peer behavior, work environment and housekeeping. Available for overtime as needed Performs all duties with attention to quality, safety, and environmental matter such as wearing appropriate personal protective equipment, identifying, reporting, and appropriately responding to hazards in the work area (spills/accidents/near misses), always maintaining proper housekeeping, and properly labeling and storing chemicals. Assume responsibility for the environmental effects of work performed and for the identification and recording of environmental problems as they arise. Complete all regulatory training as assigned (GPM, s, ISO14001, OSHA, etc.). Complete Operator Training Program according to established guidelines. Be available for other projects or assignments as requested by management. Looking for ways to simplify or improve products, services, systems, and processes to achieve Qualifications High School Diploma/GED preferred 4 months of work experience in a manufacturing environment preferred Able to read, write, and understand Basic English preferred. Operating skills of manufacturing equipment, tools, and hand/pallet jack is preferred. Problem solving skills is highly preferred.

If you enjoy working on high profile and challenging engineering projects supporting the US Army, Serco has a great opportunity for you! The Engineering Technician will be part of a dynamic team at our Fort Bliss, Texas location. Bring your expertise and collaborative skills to make an impact towards our military defense and safety of our Soldiers. This position is contingent upon your ability to transfer/maintain a Secret clearance. Serco supports the US Army as a prime contractor for their Next Generation Command and Control (NGC2) contract which supports implementing capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, and maintains modern and mobile solutions for an integrated CP infrastructure. You will be part of a team that works closely with the customer and other Serco functional area teams to deliver quality systems and associated supporting documentation. The team has been recognized by the Army Customer and the industry for their outstanding contributions to the contract and program. In this role, you will: Plan and perform routine and non-routine hardware assembly and integration assignments of substantial variety and complexity that are typically part of broader assignments. Construct components, subunits, or simple models; adapt standard equipment; troubleshoot and correct malfunctions Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment Conduct tests or experiments requiring selection and adaptation or modification of a wide variety of critical test equipment and test procedures, prepare and operate equipment, record data, measure and record problems of significant complexity that sometimes require resolution at a higher level, and analyze data and prepare test reports Extract and compile a variety of engineering data from field notes, manuals, lab reports, etc., process data, identify errors or inconsistencies, select methods of data presentation Apply methods outlined by others to limited segments of research and development projects, construct experimental or prototype models to meet engineering requirements; conduct tests or experiments and redesigns as necessary and record and evaluate data and report findings Review or develop designs by extracting and analyzing a variety of engineering data, applying conventional engineering practices to develop, prepare, or recommend schematics, designs, specifications, electrical drawings and parts lists Serve as a prototype systems and network data collector/analyst during the customer's testing and assessments Qualifications To be successful in this role, you must have: A Active DOD Secret clearance 3 years of relevant experience An Associate's degree in a specialized professional engineering and/or STEM curriculum (an Associate's Degree in Computer Networking highly preferred) A High School Diploma/GED and 2 additional years of relevant experience will be considered in lieu of education Experience with the integration of Army Tactical C4ISR systems and vehicle platforms Ability to develop system-of-systems integration plans to include developing modification designs for new equipment installation. Ability to travel up to 25% of the time. Additionally preferred experience and skills: Experience with military vehicles Experience with C4ISR Proficient in Microsoft Visio. AutoCAD a plus If you are interested in supporting and working with our military and a passionate Serco team, then submit your application now for immediate consideration. It only takes a few minutes and could change your career! Company Overview Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************. Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

Looking for an opportunity to work with a talented team and expand your experience in supporting Weapons Test and Evaluation (T&E) projects? SSI needs to add an Engineer Technician IV to support our current list of services provided to the U.S. Navy. These positions, located at the White Sands Missile Range (WSMR) in White Sands, New Mexico, will provide engineering, technical, logistics, and administrative support in the planning, maintenance, preparation, execution, launch operations and post-test phases to the W Department of the Navy Surface Warfare Center, Port Hueneme Division (NSWC PHD). Primary Functions: Identify solutions to technical design problems that arise during design, fabrication, and checkout of electrical systems Inspect designs for quality control, report findings, and make recommendations Draw diagrams and write specifications to clarify design details of experimental electronics units Build or modify prototypes from rough sketches or plans Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics. Redline technical data package (manuals, procedures, drawings...) to reflect changes in design or implementation. Possess understanding and ability to read drawings, schematic drawings, and engineering instructions for putting together electronic assemblies, as well as write-up findings and solutions. Perform highly skilled technical work in areas of installation, maintenance, and repair of mechanical equipment with a wide knowledge and high degree of proficiency. Develop, execute and assist with design work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment such as complex launch systems to include stationary and mobile launchers. Develop specialized design and weight test procedures in support of various launch systems and ordnance handling ground support equipment with wide knowledge and a high degree of proficiency. Design, implement and assist engineers in the modifications of various target designs, missile and rocket control systems, missile and rocket launchers, develop and execute precise hydraulic, static and electronic test equipment. Operate various industrial lifting equipment, man-lifts, overhead cranes, hoists, and forklifts in a safe and efficient manner. Use troubleshooting aids such as oscilloscopes and digital VOM's to accurately interpret readings. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: High School Diploma or equivalent with an additional 5-7 years of experience. Required Experience: Five or more years' experience related to testing, troubleshooting, projects including VLS, various Launching Systems, and associated equipment. Experience in: Installing, operating, testing, and evaluating various weapon systems, equipment, and components Ability to climb and work at elevated heights of up to eighty feet. Proficiency with computers and ability to work with Microsoft Word and Excel. Familiarity with AutoCAD and Solid Works. Driver's License Knowledge of WSMR operations Able to deploy to both CONUS and OCONUS Minimum of one year of previous experience operating and maintaining industrial lifting equipment, forklifts, man-lifts, cranes, and hoists. The following qualifications are desired: Familiarity with the implementation of Navy Fire Control Systems and Navy Vertical Launching Systems. Skill in launching systems, ordnance operations, and knowledge in installing and maintaining ship and land-based systems used in a test and evaluation environment. CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in May of 2023. Must possess a valid driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!