Post job

Atkore International jobs in Pueblo, CO

- 74474 jobs
  • Winder I - 3rd Shift (11:00pm - 7:30 am) $23.00/hr. + $1.00/hr. Shift Differential

    Atkore 4.3company rating

    Atkore job in Pueblo, CO

    Who we are looking for: We are currently looking for a Winder I - 3rd Shift (11:00 p.m. to 7:30 a.m.) to be based out of Pueblo. Reporting to the Manufacturing Supervisor, the Winder I is responsible for quality, quantity, and accurate production of fiberglass conduit in various diameters while adhering all personal conduct based on Atkore' ATIRE protocols. What you'll do: The Winder's responsibilities include, but are not limited to: Determine the correct number and type (epoxy or phenolic) of roving for scheduled product, string through the eye board and comb. Confirm product to produce with the schedule, verify the following: the correct winding program is selected in the computer system, the correct mandrels with correct bells are loaded in the winding equipment. Should always have compliment of mandrels loaded. Verify mandrel seals are present and in good condition. Move mandrel to winder, fill the resin bath. Wind the initial conduit mandrel and verify all specifications including verification of angle, wind patterns (no gaps) and outside diameter (OD). The wet OD measurement will be slightly smaller than the cured product. The final OD confirmation will be performed on cured product. Keep accurate production records. Monitor conduit dimensional and aesthetics requirements by communication with the sawyer and adjusting as needed. Ability to perform changeovers with assistance. Perform simple maintenance tasks and responsible for housekeeping in your assigned area. Perform shut down and cleaning procedures. Perform any other tasks appointed by the management. What you'll bring: Minimum educational requirement is a high school diploma or equivalent. Two year's previous shop experience is preferred. Excellent interpersonal and communication skills. Good understanding of math skills required for quick and accurate counting, calculations and measurements including radius, inside and outside diameter, and length. Attention to detail, accuracy, time management and organization. Must be adaptable to changes in the work environment, comfortable with multiple competing demands and able to deal with frequent change, delays, or unexpected events in a calm and logical manner. Must be able to work safely and efficiently in a fast-paced work environment. Able to lift 50 pounds unassisted. Able to be medically cleared to wear respirator and other PPE required for the job. Within 3 months, you'll: Know and follow plant safety rules and wear proper PPE (safety glasses, ear plugs, steel-toed shoes, and high-vis clothing, and gloves, etc.) Zero safety incidents in past 90 days of evaluation date. Less than 15 attendance points on the date of evaluation. No documented warnings within 90 days of probationary period. Who we are: Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We're committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $23.00 per hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: Medical, vision, and dental insurance Life insurance Short-term and long-term disability insurance 401k Paid Time Off Paid holidays Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Apply at ***********************
    $23 hourly 5d ago
  • Chief Estimator, C&I

    Huen Electric 4.2company rating

    Broadview, IL job

    About the Role: The Chief Estimator is responsible for planning, coordinating and directing the Estimating team for various electrical construction projects. This includes administering operating budgets, staffing, work assignments, salary and performance reviews. The Chief Estimator will also support and administer all department standards and procedures as well as be responsible for the final review and approvals of estimate packages. The Chief Estimator will coordinate with the Operations Manager and Division Manager for the selection of projects to pursue. Company Overview With roots dating to 1891 and 7,900+ employees, MYR Group is a publicly traded holding company of specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We are contributing to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record and were recently named to Fortune's 2020 list of 100 Fastest-Growing Companies. Essential Functions Take on leadership functions within the Estimating department Review and evaluate requests for estimates, proposals and/or qualifications Prepare weekly bid calendar and ensure timely completion of estimates Review estimates and revisions for completeness and accuracy Maintain and improve precision database Develop and maintain cost data, including labor and equipment rates, installation methods and production rates Develop and maintain estimating procedures and guidelines Prepare reports as needed Set departmental budget Determine constructability requirements Lead, direct, and audit the work of assigned staff; act as a mentor Advise staff of company policy expectations Coordinate employee performance reviews Develop and maintain relationships with existing and new clients May develop training requirements for the estimating staff Regular and predictable attendance Other duties as assigned Essential functions of this position are to be performed in a Company-designated office or field location Understand and comply with the Company's Code of Business Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Previous experience as a Lead or Senior level Estimator 10+ years of experience within the construction industry Bachelor's degree in Engineering, Construction Management or related field; combination of relevant education and experience considered in lieu of degree Knowledge/Skills/Abilities Working knowledge of the N.E.C. and local codes Proficiency with Microsoft Office applications and estimating software Team player with excellent analytical, organizational and communication skills Ability to read and understand civil, architectural, structural, mechanical, etc. plans and specifications to include blueprints, proposals and other documents What We Offer: Compensation & Benefits Compensation commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Two days per week remote work option for non-field roles depending on position and performance. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $250 quarterly, $1,000 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS2 LinkedIn Workplace: #LI-Onsite
    $68k-91k yearly est. 1d ago
  • Project Controls Manager T&D

    MYR Group 4.1company rating

    Denver, CO job

    About the Role: The Project Controls Manager, T&D serves as a strategic partner in schedule management, cost controls, and the implementation of project management best practices. In addition to creating and maintaining project schedules, the Project Controls Mgr T&D is responsible for providing oversight to subsidiaries with project scheduling, controls, mentorship, and training. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Our company's Transmission and Distribution (T&D) division offers a comprehensive range of electrical services, including transmission, distribution, substation and clean energy construction. We are experienced in delivering reliable, high-quality infrastructure solutions to meet the growing demands of the power and utility industry. Essential Functions Strategic Program & Portfolio Management Develop and implement enterprise-wide project controls and scheduling training and frameworks to ensure consistency, predictability, and scalability across T&D projects Scheduling Program Best Practices Provide strategic guidance to project managers, schedulers and controls, supporting teams to optimizing schedules Create, update, and maintain detailed schedules using Primavera P6, MS Project, or similar tools, ensuring integration with cost and resource plans Lead project teams with schedule development, logic sequencing, resource loading, and critical path analysis Design training programs on schedule management tools and methodologies Lead training for project managers, superintendents, and field leaders on schedule development, tracking, and forecasting Perform periodic schedule audits to ensure consistency and accuracy across projects Evaluate schedule performance and provide recovery strategies when delays or risks are identified Project Controls & Project Management Best Practices Lead the implementation of standardized processes for cost tracking, forecasting, and change controls Develop and maintain financial controls for projects Mentor teams on scheduling and controls best practices Conduct post-project reviews and lessons learned to improve future execution Collaborate with field and office teams to ensure proper documentation, reporting, and visibility into project performance Regular and predictable attendance Other duties as assigned Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications 7+ years of progressively responsible experience in project controls, scheduling, and program management within the construction (electrical construction preferred) industry Experience with enterprise platforms such as Procore, JD Edwards, or similar ERP systems Experience supporting a diverse portfolio of concurrent transmission and distribution projects Preferred Education Bachelor's degree in Construction Management, Engineering, Business, or related field preferred; combination of relevant education and experience considered in lieu of degree Knowledge/Skills/Abilities Proficiency in Primavera P6, MS Project, and CPM scheduling tools Strong knowledge of cost management, earned value analysis, and project forecasting Strong verbal and written communication, facilitation and stakeholder engagement skills Willingness and ability to travel 25-50% to project sites and regional offices What We Offer: Compensation & Benefits Salary $72,910-$135,404/ year Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate Comprehensive benefits package - Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage Dental - 100% employer-paid premium ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday) Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential Superior educational assistance program (support for educational costs, internal training, and more!) Company-paid short and long-term disability, life, and accidental death & dismemberment Company-paid business travel accident insurance Employee Assistance Plan (EAP) Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents This position will remain posted for a minimum of three days. The posting will remain active and automatically extend until the vacancy is filled. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-MS1 LinkedIn Workplace: #LI-Hybrid
    $72.9k-135.4k yearly 4d ago
  • Electrical Maintenance Engineer (Cement)

    Calportland 4.6company rating

    Tucson, AZ job

    The Electrical Engineer is responsible for all electronic control, radio communication, monitoring systems, and components including computer-related hardware and software. Benefits * Medical * Dental * Vision * Employer Paid & Voluntary Life Insurance * 401(k) Employer Match plus Annual Profit-Sharing Contributions * Paid Vacation, Sick Time & Holidays * Employer Paid Disability Plan * Employee Assistance Program * CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That's why we give you a wide range of benefits to choose from. • Medical, Dental, Vision o low-cost premiums even for family coverage • Company-paid life/AD&D insurance • Company-paid short-term disability • Paid sick/vacation/holiday • 401k/Company Funded Pension Program (program is dependent upon location and job type) • Employee Assistance Program (EAP) • Additional voluntary benefits Compensation $95,000 to $105,000 Depending on Experience Responsibilities Ability to assist and support the Plant Automation Engineer with the operation, maintenance, and programming of all plant instrument/analyzer systems including logic, analog and graphics, and all other technology that may be acquired Assist in the maintenance of instrument/analyzer/electrical systems, server-based high-level analyzer systems, and data historians such as OSI Pi, FLS ECS/QCX; assist CIS with the maintenance of corporate IT network Work with the plant's team to develop new control systems applications for projects Work with the energy team to identify improvements and participate in energy audits Assist with all aspects of capital projects including sizing of conductors and protective devices; load calculations for new and existing power systems in preparation for additions, changes, and capital projects interconnecting to the plant electrical system Identify worn and defective components as well as appropriate replacements; provide field inspections and supervision for electrical work on projects Support plant by diagnosing and correcting electrical problems Provide technical and safety training to Plant Electricians Complete design and drawing updates for replacement components Ability to apply corporate standards to designs and solutions suggested/implemented; use new technologies at the plant such as smart MCCs, including design, training of electricians, and updating documentation/diagnostic systems Replace or upgrade worn and depreciated components; design, change, and modify instrument/analyzer systems Create and submit capital proposals Education Bachelor of Science degree in Engineering Requirements/Qualifications Willing and able to work flexible hours as needed to maintain plant instrument/analyzer systems Must be a self-starter and be able to work independently Ability to maintain skills as necessary to keep pace with the ever-changing and improving technology for plant instrument/analyzer systems Strong communications and management skills - will work with, direct, assist and/or follow vendor services for troubleshooting and maintenance of all instrument/analyzer systems Troubleshooting skills and critical thinking are a must Ability to read and edit process flow drawings; the ability to read and create logic decision charts Ability to travel - required to travel to company facilities and other meeting locations on occasion Must be able to work cooperatively with plant and corporate personnel Preferred: Prior experience in computer automated control and instrumentation and/or cement production processes Knowledge of National Electrical Code (NEC) Understanding of instrument/analyzer system fundamentals Power distribution systems, relays, medium volt switchgear, instrumentation, PLC's, VFD's, etc. Conditions of Employment Successful candidate must submit to a post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA-regulated ongoing drug and alcohol testing. #LI-PW1
    $95k-105k yearly 3d ago
  • Registered Nurse - $5,000 Sign On Bonus

    Cambridge Home Health Care 3.4company rating

    Marion, OH job

    We are hiring for a Full Time Registered Nurse - Sign On Bonus $5,000 At Cambridge, a part of LHC Group, we embrace a culture of caring, belonging, and trust and enjoy the meaningful connections that come from it: for the whole patient, their families, each other, and the communities we serve-it truly is all about helping people. You can find a home for your career here. As a Registered Nurse, you can expect: flexibility for true work-life balance opportunities for career growth the ability to build trusted nurse-patient relationships employee-focused wellness and support programs If you love nursing and want to strengthen your experience, this is a great opportunity for you. The Registered Nurse (RN) in Home Health provides and directs provisions of nursing care to patients in their homes as prescribed by the physician and in compliance with applicable laws, regulations, and agency policies. Coordinates total plan of care with other health care professionals involved in care and helps to achieve and maintain continuity of patient care by planning and exchanging information with physician, agency personnel, patient, family, and community resources. All done within a Point of Care setting. Makes the initial and/or comprehensive nursing evaluation visit, determines primary focus of care, develops the plan of care within state specific guidelines, and submits accurate, complete, and timely documentation in collaboration with physician orders. Performs patient comprehensive assessments at designated time points and develops the appropriate plan of care. Ensures patients meet home health eligibility and medical necessity guidelines as defined by payer source. License Requirements Current RN licensure in state of practice Current CPR certification Current Drivers License, vehicle insurance, and access to a dependable vehicle or public transportation
    $43k-89k yearly est. 4d ago
  • Driver - CDL Class A

    Trulite Glass & Aluminum Solutions 4.3company rating

    Salt Lake City, UT job

    Class A CDL - HOME EVERY WEEKEND - NO OUT OF POCKET EXPENSES Who You Are: A perfect Class A CDL Driver would be an individual that has a great personality and Customer Service Skills. They must be able deliver our product on time, safely. They must follow all DOT regulations that are required of all Class A CDL Drivers. They must be able to represent our company. What Brought You Here: Hourly wage starting at $29.00 Monthly driver incentive bonus Quarterly safety bonus opportunities Weekly pay Shift Days and Hours: Monday thru Friday Benefits starting DAY ONE! What You Will Be Doing: Drives truck to transport materials to and from specified destinations. Assists customers in unloading product if needed. Must be able to lift 75 lbs. Occasionally collects payment for goods and services. Maintains truck log, according to state and federal regulations. Maintains telephone and / or radio contact with supervisor to receive delivery instructions. Inspects truck load as well as pre-trip inspection of vehicle. Positions blocks and ties rope around items to secure cargo during transit. Must be customer service oriented. Skills You Bring: Class A CDL Driver License required with a minimum of 1 year driving experience Be able to lift up to 75lbs Great Customer Service Skills Reliable Organized Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured outside of work. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.
    $29 hourly 2d ago
  • Industrial Maintenance Technician - Day Shift

    Trulite Glass & Aluminum Solutions 4.3company rating

    Lithia Springs, GA job

    This role is not open for submissions from outside staffing agencies Industrial Electrical/Mechanical Technician - Day Shift Prior fabrication experience required) Located at 660 Campbell Ct. Lithia Springs, GA 30122 What Brought You Here Pay: $28-$30/hour or more depending on experience Quarterly safety bonus opportunities Night shift- 8:00 AM - 5:30 PM weekends and OT as needed Benefits starting DAY ONE! Earn additional pay based on individual and team performance with our Monthly Production Incentive Compensation Program! Who You Are: A technical guru & a true team player! Loves opportunities for advancement! Enjoys family like work environment! An individual that can troubleshoot electrical and mechanical problems on machinery safely by following company policy. Able to work a flexible schedule. What You Will Be Doing: Performing highly diversified duties to install and maintain production machines and the plant facility's equipment. Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, and hydraulic systems. Troubleshoot and repair of production machines. Fabricate equipment and parts as needed. Mig welding experience is a plus. Diagnose problems, replace or repair parts, test, and make adjustments. Perform regular preventive maintenance on machines, equipment, and plant facilities. Detect faulty operations or defective material and report those and any unusual situations to proper supervision. Some weekend work required and ability to work changing shifts. Skills You Bring: 5 or more years of industrial maintenance experience and/or prior industrial maintenance school. Prior fabrication experience Prior mig welding experience highly preferred Experience in a production or manufacturing environment; Glass industry is preferred (not required). Control circuit troubleshooting experience Minimum of 2 years of electrical schematics Knowledge of 480v 3 phase/270v/110v/24v Knowledge of mechanical, electrical, pneumatic, and hydraulic systems Able to use multimeter efficiently VFD programming knowledge PLC output and input controls troubleshooting Experience with CNC control systems Knowledge of potentiometers/servos/drives/encoders Proficient at troubleshooting electrical issues Strong mechanical skills. Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if you experience a non-occupational injury. We are pleased to offer a comprehensive wellness initiative that includes access to a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.
    $28-30 hourly 4d ago
  • In Home Caregiver

    Cambridge Home Health Care 3.4company rating

    Parker, PA job

    We are hiring Caregivers/HHA/PCAs to work with our in-home patients in Sarver, PA and the surrounding area. 1:1 Patient Care Weekly Pay Life-Friendly Scheduling At Cambridge Home Healthcare, a part of LHC Group, we embrace a culture of caring, belonging, and trust and enjoy the meaningful connections that come from it: for the whole patient, their families, each other, and the communities we serve-it truly is all about helping people. You can find a home for your career here. As CNAs, Aides & Caregivers, you can expect: opportunities to build trusted relationships as you care & connect with people of all ages. flexibility for true work-life balance career mobility and growth opportunities If you have a passion for care and want to strengthen your career, this is a great opportunity for you! Job Summary The Personal Care Services Aide is a person who provides support, assistance with personal hygiene and household functions for an individual to be able to remain in their own home. Specific Job Duties/Responsibilities Reports observations of the client's condition to the Agency Director or accounts manager. Notifies the Agency Director immediately if any incidents or accidents occur. Drives safely, complies with traffic regulations, and wears a seat belt when business travel is required. May provide or assist clients with activities of daily living including: bathing in bed, tub or shower; care of hair including shampoo, combing and brushing; care of teeth and mouth including denture care; nail care, filing only; skin care including pericare and applying lotion; transfer of patient from bed to chair and to wheelchair. Transfer of patients on and off bedpan, commode and toilet. Assists with household tasks directly essential to clients personal care. Experience Desired Six months experience in home care preferred. Skill Requirements Ability to work flexible hours as required to meet identified patients needs. Ability to function in any home situation regardless of age, race, creed, color, sex, disability, or financial condition of the patient. Able to work independently. Ability to multi-task, self-directed, good time management skills, courteous, and common sense. Good communication, writing, and organizational skills. Must possess the disposition and personality to work harmoniously with a wide variety of people and their families keeping personal matters confidential. Must possess a strong commitment to the goals, mission, and philosophy of the organization. Ability to adapt to changing organizational needs.
    $22k-30k yearly est. 4d ago
  • EPC Project Engineer

    CSI Electrical Contractors 4.4company rating

    Santa Fe Springs, CA job

    About the Role: The Project Engineer will be responsible for coordinating with individuals, managing engineering firms, and following processes and standards to ensure the Company achieves reliable, quality, and safe designs. This person will be responsible for facilitating the design process from conceptual through IFC design. They will be responsible for managing 3rd party engineering firms, working with CSI internal engineering resources, and being the project lead in all aspects of project design. This responsibility will align and work with the construction team to ensure they have the necessary design information, quantities, and parameters to build the work. They will support the project design by ensuring the design meets the contractual, technical, safety, and quality requirement from Client, Company, and Industry Specifications and Standards. This position will have travel and project responsibilities to support the site team and lead design reviews as required. This position will not manage or supervise the construction activities performed on the project site. Company Overview Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We're proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions Manage and direct multiple 3rd party design firms working towards Issued for Construction Drawings for Electrical, Civil, and Structural designs. Coordinate and lead design reviews at each design milestone. Design reviews will likely include the owner, CSI, and 3rd party personnel. Perform the overall coordination and integration of technical activities in engineering projects and services. Direct and review project designs and technology integration. Work with project managers to facilitate design understanding as the start of construction occurs. Ensure there is understanding of the intent of the design and how the design will be audited throughout the construction phase. Seek opportunities to add value to the project. Perform economic analysis/value engineering to determine cost-effective solutions and prepare written recommendations. Ensure value engineering is incorporated into future designs. Manage 3rd party engineering resources to ensure deadlines are met, and the construction team has the necessary engineering information to produce a quality project on schedule. Maintain and manage engineering schedules and budgets to meet the requirements of the project. Possess a full understanding of time and resource management to achieve the results needed for project deadlines. Review and facilitate approval of materials to be used on the project by attaining Engineer of Record approvals or other resources available. Ensure takeoffs are complete and accurate for material procurement. Nurture and maintain key professional relationships with utilities, owners, engineering firms, energy subject matter experts, and others. Coordinate, lead, and document regularly scheduled calls between applicable parties. Assure projects are designed and constructed according to all applicable safety standards, including ASTM, NESC, NEC, NFPA, etc. Ensure design deliverables are received in time to support procurement and project schedule. Acts as a technical resource for project construction teams. Acts as engineering liaison for the construction team, 3rd party Engineer of Record, Client, and internal engineering resources from award through completion. Responsible for engineering document control process, including client and engineering transmittals, RFI's, and associated logs. Apply for and complete local permits as specified by the contract. Ensure that each design is developed with consideration for efficient installation, maintenance, and repair. Consult Field Operations Manager and Trade Superintendents as necessary for recommendations. Review implications of project design changes and make recommendations Recognize, document, and report cost impacts due to design changes. Share impacts with project management and procurement team. Perform economic analysis/value engineering to determine cost-effective solutions and prepare written recommendations. Train and develop Field Engineers and Field Coordinators in engineering management, document control, and RFI processes. About You: Qualifications BS in Construction Management, Business, or Engineering. Minimum of three years in the solar + BESS EPC, with a strong knowledge of construction sequencing, construction methods, and materials practices, including knowledge of electrical systems. OSHA 30 certification desired, but not mandatory. Registered Professional Engineer (PE) status or qualified to take test desired, but not mandatory. Can be a combination of trade, education, and relevant work experience. Knowledge/Skills/Abilities Proficiency in MS Office Suite (including Microsoft Word, Excel, PowerPoint, and Visio). Database experience is a plus. Experience with Primavera 6 and Microsoft Project scheduling software. Positive and proactive attitude and ability to take initiative. Excellent reasoning skills for identifying strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Ability to take ownership and accountability, work in a team environment, display leadership skills, work under pressure, and adapt to changing job requirements. Strong leadership abilities and interpersonal, organizational, and communication skills (tact, diplomacy, influence, etc.), both written and verbal. In-depth knowledge of equipment and practices used in solar power plant construction. Knowledge of business and management principles involved in planning, resource allocation, leadership, production methods, and coordination of people/resources. Knowledge and skills of providing best-in-class customer service, including needs assessment, quality, and safety standards, and achieving overall customer satisfaction. Consideration of the relative costs, benefits, and impacts of potential actions to choose the most appropriate one. Ability to ensure the outcome and results from work performed and effective resources. Knowledge of electrical power engineering principles and familiarity with computer and analytical tools related to equipment sizing, load flow, and power quality. Ability to monitor and assess the personal performance and the performance of other individuals or organizations to make improvements or take corrective action. Work Environment Works in the office 70% of the time and on-site 30% of the time May work in varying weather conditions: hot, cold, and wet conditions. What We Offer: Compensation & Benefits Hourly Rate $36.00-$53.00/ hour (Non-Exempt) Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications. Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success. Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience. Annual Paid Time Off starting at 15 days plus 9 paid Holidays. Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential. Company-paid life, and accidental death & dismemberment. Employee Assistance Plan (EAP). Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents. Company medical and dental insurance for you and your family. CSI pays 100% for Employee and 75% of dependent coverage premium for the selected plan(s) Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Workplace: #LI-Onsite
    $36-53 hourly 1d ago
  • HVAC Service Technician - Newnan

    Coolray Heating & Air 4.1company rating

    Newnan, GA job

    The Role: How would you like to be a part of one of the fastest growing home service companies in the Southeast? You'll be able to play an important role within the HVAC Department at Coolray Companies. Earning Potential $95,000 - $150,000 + per year (average), PLUS industry leading benefits, PTO, 6 Paid Holidays per year + get paid to take your birthday off, 401(k) with Company match and so much more! **Must be able to pass a pre-employment background check and drug screen ** The Company: Coolray Companies has been keeping homes in Atlanta comfortable since 1966. At Coolray, Mr. Plumber, and BriteBox Electrical, we are committed to prompt, on-time service, easy scheduling, and our Lifetime Parts & Labor Warranty. With over 500 team members and three service locations, we're ready for YOU to join our team. Ongoing role training and knowledge growth opportunities provided by our experience management team. Coolray Heating and Cooling and Mr. Plumber was selected as Georgia Business Journal's ‘Best of Georgia' in 2021! BriteBox Electrical was selected ‘Best Electrician' by My Home Improvement Atlanta in 2021! What's In It For Me? Eligible for Bonus Programs (Including Weekly Bonus up to 10% of the Truck Revenue and Lead Generating Stipends) Tool Purchasing Program Family Friendly Schedules Boot Allowance each Year with Company Continued training to grow knowledge in the HVAC industry Opportunity to join Coolray Companies Access to Coolray Company tickets at Atlanta Braves and Gwinnett Stripers games Opportunity to participate in charity events through Coolray Cares Program Market Value Compensation Robust PTO Plan Paid training and dedicated, on-going training and support. Health, Vision and Dental plans for you and your family to choose from 401K Retirement Plan with company match Life Insurance, Short-Term and Long-Term Disability Special Program Options: FSA, EAP, Legal Services, Pet Insurance, and Identity Theft Continuous Training for your Professional Development Working in a dynamic, collaborative, and fun environment Coached and supported career growth provided by an experienced management team Responsibilities: What Will I Do? Successfully perform service, install or routine maintenance on residential heating and air conditioning systems Operate a variety of hand and power tools to inspect repair, and conduct maintenance on furnaces, condensers, and compressors Build client relationships by providing outstanding service through strong communication and customer service skills Educate your clients on their systems and maintenance requirements including the CoolCare Maintenance Agreement Identify opportunities for clients to improve their home comfort systems through product overview Document service performed and recommendations made by completing applicable forms, reports, logs and/or records Complete all tasks in accordance with quality and safety standards Qualifications: Do I have What it Takes? Desire to learn and grow career experience in the HVAC industry 2+ years of experience in maintenance, diagnosing & troubleshooting, and correcting diverse HVAC system issues Mechanical aptitude Excellent interpersonal and customer service skills with a strong desire to exceed customer expectations Results driven in a high-energy environment Attention to detail Must pass MVR Test Must be able to follow directions and work independently Wrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The company encourages all qualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally.
    $34k-55k yearly est. 1d ago
  • Associate Attorney

    Holden & Armer, PC 3.8company rating

    Phoenix, AZ job

    *Holden & Armer, P.C.* is seeking a litigation associate with three to six years of experience to join its medical malpractice litigation team. Our attorneys participate in every stage of litigation on behalf of healthcare providers. The role includes direct interaction with healthcare professionals and opposing counsel, taking and defending depositions, presenting arguments in court, and working with expert witnesses in collaboration with experienced litigators. This position offers a hybrid remote schedule along with competitive compensation and the opportunity to grow in a challenging and rewarding area of practice. We are committed to building a long term relationship and supporting your professional development. Job Type: Full-time Pay: From $120,000.00 per year Benefits: * 401(k) * Health insurance * Paid time off * Retirement plan Experience: * Litigation: 3 years (Required) License/Certification: * Member of the Arizona State Bar in good standing (Required) Work Location: Hybrid remote in Phoenix, AZ 85048
    $120k yearly 23d ago
  • HVAC Maintenance Trainee - Sales

    Service Champions 4.4company rating

    Brea, CA job

    Role Responsibilities: We're passionate about delivering superior service and solutions, and this role is about more than just maintenance; it's about understanding clients' needs and recommending the best products and services to enhance their comfort and safety. We provide extensive training to help you develop the technical and sales skills necessary for a successful, profitable career. Interviews Starting Now for Next Training Date: January 2026 10-Weeks of Paid Training • Full Benefits • Upon Graduation Company Vehicle • Growth Potential After Training, You Will Know How to: Perform routine maintenance on heating and air conditioning systems in residential homes. Recommend Products and Services: Recommending the best products and services to enhance their comfort and safety that add value. Operate tools to inspect, repair, and maintain HVAC systems, from furnaces to condenser units. Communicate professionally with clients, demonstrate integrity and respect, and identify opportunities to improve their HVAC systems. Skills & Qualifications: Strong communication and sales skills-you're comfortable recommending services to meet client needs. Customer service oriented with an ability to foster trust and long-term client relationships. Ability to understand and follow directions, be punctual, and work with a high degree of integrity. Physical Requirements & Working Conditions: Must regularly use hands, arms, and voice for various tasks and client interactions. Work in attics, crawl spaces, and other residential spaces, with frequent physical activity. Benefits: Paid Training Program Potential to Earn $50-80k in Your First Year (Hourly + Commission Role) Company Vehicle + Gas Card Tools Provided 401k, Medical, Dental, Vision, and Life Insurance Take the first step toward a rewarding career in HVAC maintenance and sales with our company! #SCC Pay Range$50,000-$80,000 USD About Service Champions: A career with Service Champions can change your life. Recognized as one of Orange County's top places to work, many of our employees have shared that they love working here and the success it has brought them. You can be proud to be a part of Service Champions. We are a nationally recognized residential heating and air conditioning company that serves Southern California homeowners. Because our clients love our service and friendliness, we continue to grow at a rapid pace, which means terrific opportunities for people with a great attitude and a heart for service. We are an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Additionally, we will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the California Fair Chance Act and the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. Privacy Policy
    $50k-80k yearly 2d ago
  • Service Supervisor, Plumbing

    Service Champions 4.4company rating

    Brea, CA job

    Service Champions is seeking an experienced and motivated Plumbing Service Supervisor to oversee our plumbing operations in Orange County, CA. The Plumbing Service Supervisor will be responsible for managing a team of plumbers, ensuring high-quality workmanship, maintaining safety standards, and optimizing job efficiency. This position requires strong leadership, technical expertise, and the ability to train and mentor team members. Key Responsibilities: Supervise and coordinate daily plumbing operations, ensuring projects are completed on time and within budget. Lead, train, and mentor plumbing technicians to enhance their skills and maintain high-performance levels. Ensure compliance with local plumbing codes, safety regulations, and company policies. Assist with troubleshooting complex plumbing issues and provide technical guidance to the team. Maintain inventory control of plumbing materials and equipment. Work closely with the dispatch team to schedule jobs efficiently. Conduct site visits and inspections to ensure quality control and customer satisfaction. Address customer concerns and provide excellent service to maintain Bell Brothers' reputation for quality workmanship. Support hiring, training, and performance management initiatives for the plumbing department. Assist in the development and implementation of strategies to improve productivity and profitability. Qualifications: Minimum of 5 years of experience in residential plumbing. At least 2 years of experience in a supervisory or leadership role preferred. Strong knowledge of plumbing systems, codes, and safety regulations. Excellent leadership, communication, and problem-solving skills. Ability to read blueprints, schematics, and technical drawings. Proficiency in using plumbing tools and equipment. Valid driver's license. Ability to work flexible hours, including weekends and on-call rotations as needed. Benefits: Competitive salary based on experience, with opportunity for bonus. Health, dental, and vision insurance. 401(k) with company match. Paid time off and holidays. Ongoing training and career development opportunities. Company vehicle provided. #SCC Pay Range$85,000-$95,000 USD About Service Champions: A career with Service Champions can change your life. Recognized as one of Orange County's top places to work, many of our employees have shared that they love working here and the success it has brought them. You can be proud to be a part of Service Champions. We are a nationally recognized residential heating and air conditioning company that serves Southern California homeowners. Because our clients love our service and friendliness, we continue to grow at a rapid pace, which means terrific opportunities for people with a great attitude and a heart for service. We are an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Additionally, we will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the California Fair Chance Act and the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. Privacy Policy
    $85k-95k yearly 2d ago
  • CDL Driver

    Trulite Glass & Aluminum Solutions 4.3company rating

    Cheswick, PA job

    This role is not open for submissions from outside staffing agencies Class A or Class B CDL Driver Overnight 1-2 nights at a time; occasionally 3 nights Home on Fridays LOCATED at 100 Business Center Drive, Cheswick, PA 15024 What Brought You Here: Class A (Union) $27.40/hour Class B (Union) $24.50/hour Quarterly safety BONUS opportunities Home on Fridays Overnight 1-2 nights at a time; occasionally 3 nights but not often Depart Sunday about once every 2 months (rotation) No out-of-pocket expenses- per diem, fuel card, and EZPass Sleep in a hotel Must be okay with assisting in unloading truck as needed. Benefits starting DAY ONE! Who You Are: Successful candidates for the CDL Driver role are motivated and eager to provide a high level of customer service. You are someone with previous driving experience and is familiar with pre and post trip inspections and using online log systems. What You Will Be Doing: Current and active Class A or B Driver's license with good driving record Drives truck to destination. Distributes receipts for load picked up. Occasionally collects payment for goods delivered and for delivery charges. Maintains truck log, according to state and federal regulations. Contacts customers to advise delivery times. Unload truck. Inspects truck equipment and supplies such as tires, lights, brakes, gas, oil, and water. Skills You Bring: Must be CDL Licensed, must pass Driver's Testing, and must pass DOT Physical / Drug Testing. Previous pre/post trip inspections preferred Delivery driving experience preferred Proficient in reading and writing English Capable of working in a physically demanding work environment which includes bending; stretching; pushing, pulling, and lifting a MINIMUM of 75 LBS; and extensive fast-paced walking in all weather conditions throughout the year Knowledge of basic math, ability to read and write the English language, and map reading skills' Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if you experience a non-occupational injury. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. To assist with your medical expenses, Trulite will fund a Health Reimbursement Account (HRA) on your behalf if you elect our HRA health coverage plan which will offset qualified out of pocket medical expenses you may incur. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.
    $24.5-27.4 hourly 3d ago
  • HVAC Service Manager

    Bell Brothers 4.1company rating

    Hayward, CA job

    About Bell Bros: At Bell Brothers Plumbing, Heating & Air, we are your gateway to a rewarding career in HVAC and plumbing services! We are proud to be a leading provider of heating, ventilation, air conditioning, windows, and plumbing solutions, and we believe that our success is rooted in the dedicated and passionate team members who make it all possible. We offer a culture of excellence, professional growth and development, cutting-edge technology and tools, a strong team environment, and competitive compensation and benefits. Position Overview: As an HVAC Service Manager, you will lead a high-performing team dedicated to delivering exceptional HVAC service. Your role ensures operational excellence, customer satisfaction, and team development. This leadership position is pivotal to our commitment to providing superior HVAC solutions. Key Responsibilities: Leadership and Team Management Supervise, mentor, and inspire a team of HVAC technicians to achieve service excellence. Conduct regular team meetings to share updates, provide training, and foster a positive team culture. Oversee the recruitment, onboarding, and continuous professional development of team members. Service Operations Oversight Coordinate and manage daily service schedules, optimizing technician productivity. Ensure timely completion of service calls and maintain high-quality standards. Monitor and enforce safety protocols to promote a secure working environment. Customer Relations Serve as the primary point of contact for escalated customer inquiries, ensuring resolution and satisfaction. Maintain strong relationships with clients by addressing feedback and enhancing service offerings. Financial Management Develop and manage the service department's budget, focusing on cost control and profitability. Track expenses and revenue to ensure the department meets financial goals. Process Improvement Evaluate current service processes, identifying opportunities for efficiency and quality improvement. Implement advanced HVAC technologies and best practices to stay ahead in the industry. Compliance and Documentation Ensure adherence to industry standards and regulatory requirements. Maintain accurate service records and reports for internal and external use. Qualifications: High school diploma or GED; technical training in HVAC is preferred. A minimum of 5 years in HVAC services, with at least 2 years in a supervisory role. Proven knowledge of HVAC systems, safety standards, and troubleshooting techniques. Exceptional leadership, communication, and organizational skills. Ability to manage multiple priorities in a fast-paced environment. Benefits: Competitive salary and performance-based bonuses. Comprehensive medical, dental, and vision insurance. 401(k) retirement plan with company match. Generous paid time off and holidays. Professional development and training opportunities. #BELLP Pay Range$110,000-$145,000 USD We are an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Additionally, we will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the California Fair Chance Act. Bell Bros Privacy Policy
    $110k-145k yearly 2d ago
  • Drain Technician

    Bell Brothers 4.1company rating

    Hayward, CA job

    About Bell Bros: At Bell Brothers Plumbing, Heating & Air, we are your gateway to a rewarding career in HVAC and plumbing services! We are proud to be a leading provider of heating, ventilation, air conditioning, windows, and plumbing solutions, and we believe that our success is rooted in the dedicated and passionate team members who make it all possible. We offer a culture of excellence, professional growth and development, cutting-edge technology and tools, a strong team environment, and competitive compensation and benefits. The Drain Technician is responsible for meeting with customers to identify and diagnose specific drain/sewer piping concerns, getting the line(s) flowing and advising customers on next steps to include a Camera Technician and a camera main inspection. Drain Technicians produce quality, on-time inspections and clearing installation of plumbing related jobs to meet the requirements of our customer agreement and in accordance with local plumbing codes. Essential Functions: Safety of self as well as safety of employer vehicles, equipment, and customer homes. Works independently with little supervision in the completion of assignments Performs drain clearing at customer homes and provides overall assessment of known systems Provides guidance to homeowners on next steps in the process to permanently repair sewer lines Works efficiently and keeps job areas clean and organized. Works closely with Camera Technician, Dispatch and Sewer Supervisor in providing customer solutions. Properly represents the company when in the public and demonstrates company ethics. Establishes and maintains customer oriented focus. Communicates politely and effectively with, and in front of, customers. Works as part of a team with managers and other departments. Participate and attend department meetings. Demonstrates knowledge of sewer systems, repair and installation using standard tools, machinery, and equipment. Demonstrates writing skills with a focus on technical accuracy, writing quality and clarity are also required. Uses, applies and monitors appropriate safety practices and procedures and reports violations to Sewer Supervisor Skills and Abilities: Thorough knowledge of all sewer systems Ability to work independently and manage time efficiently Strong communication skills, verbal and written Able to assist in evaluating assigned install team personnel on job performance and provide field coaching and as necessary. Follows and demonstrates company policies with team members Diagnostic and analytical skills Works well under pressure Demonstrates effective communication skills with customers, install team members, dispatch, and management #BELLP Pay Range$21-$25 USD We are an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Additionally, we will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the California Fair Chance Act. Bell Bros Privacy Policy
    $21-25 hourly 2d ago
  • Technical Systems Account Manager

    Windemuller, Inc. 3.8company rating

    Midland, MI job

    At Windemuller, we specialize in electrical, communications, and security systems that keep businesses connected and protected. Our team designs and installs advanced low-voltage solutions-including structured cabling, access control, video surveillance, and integrated security networks. We're seeking a skilled Technical Account Manager with a strong background in low-voltage security and communications to support our growing team and ensure our customers receive exceptional service. If you are passionate about IP camera systems, access control, structured cabling, and security-focused network infrastructure, and want to work with a collaborative, future-focused team-we'd love to meet you. Position Summary: The Technical Account Manager will support Windemuller's low voltage, communications, and security technology offerings, ensuring our solutions remain innovative, reliable, and aligned with customer needs. This role blends technical expertise with client relationship management and plays a key part in expanding our security and communications capabilities. You'll collaborate with our Communications and Technical Services teams to strengthen processes, evaluate new technologies, and drive excellence across our security and low voltage projects. Reports to: Senior Manager of Communications Key Responsibilities: Evaluate and enhance Windemuller's low voltage and security service offerings, including structured cabling, IP video systems, and access control. Manage and develop vendor and manufacturer partnerships for security and communications solutions. Collaborate with technical teams to create standardized procedures and best practices for low voltage installations. Research and recommend emerging video management systems (VMS), access control platforms, and low voltage communications technologies. Develop and implement training programs and technical documentation for field and support staff. Support sales teams with customer presentations, system demos, estimating, and project planning. Serve as project and account manager for key low voltage/security clients. Maintain high customer satisfaction through clear communication and reliable service. Coordinate manpower, materials, and schedules for assigned projects. Maintain a safe working environment and ensure OSHA and company safety standards are followed. Participate in on-call rotation as needed. Qualifications: Education & Training Required: High School Diploma or GED Preferred: Certifications or training in Low Voltage Communications, Access Control, Intrusion Detection, or Video Management Systems Experience & Technical Skills: 8+ years of experience in low voltage systems, communications, security integration, or related technical fields Strong background in: Structured cabling and low voltage installation IP camera systems and VMS platforms Access control systems Network fundamentals as they relate to security devices Experience with project management, estimating, system commissioning, and end-user training Proficiency with Microsoft Office Suite (Word, Excel, Outlook, Teams) Ability to read and interpret blueprints, schematics, and technical diagrams Excellent problem-solving and client communication skills Ability to work both independently and collaboratively Physical & Work Requirements: Ability to lift up to 50 lbs, climb, bend, stoop, and handle materials Visual and auditory acuity with the ability to distinguish color codes Work in indoor and outdoor conditions (heat, cold, rain, snow) Must provide and maintain personal hand tools PPE required at all times Full-time, 40 hours per week, with overtime or occasional night work as required Performance Expectations: Complete work safely, efficiently, and accurately Maintain strong professional relationships with clients and internal teams Demonstrate continuous learning and adaptability in low voltage/security technologies Follow all Windemuller policies, safety standards, and core values Why Join Windemuller? Competitive pay and comprehensive benefits Career growth with support for certifications and technical training Employee-centered culture with a strong safety focus Opportunity to be part of a respected leader in communications and security solutions EEO/M/F/Disabled/Vet
    $82k-109k yearly est. 1d ago
  • Information Technology Technician

    TEC Systems 4.5company rating

    New York, NY job

    Level 1 IT Technician Office: Long Island City, NY (daily travel to client sites in NYC required) Company: TEC Building Systems LLC | tecsystemsnyc.com Salary range: $55,000 - $65,000 Reports to: Basim Sharhan, IT Manager Recruiter: Kate Lewis, People Ops Program Manager Please apply on LinkedIn and send resume and cover letter to ********************* OVERVIEW TEC Building Systems is seeking a Level 1 IT Technician to join our growing team. In this role, you'll design, maintain, and troubleshoot the hardware and software of our customers' building management systems. You'll provide technical support both in-house and on-site, perform upgrades and preventive maintenance, and assist with training non-technical staff in troubleshooting techniques. This position requires daily travel to client sites throughout New York. Applicants must hold a valid driver's license. RESPONSIBILITIES Perform preventative maintenance on servers and workstations at customer sites Install and configure desktop and laptop computers, peripherals, and related hardware Integrate devices into network environments and test software applications Provide Tier 1 hardware and software support for Windows devices Deliver on-site technical support and ensure client satisfaction during deployments Document all work assignments, resolutions, and client approvals Provide help desk support: problem determination, documentation, diagnostics, resolution, and ticket escalation Troubleshoot hardware, software, and connectivity issues for end users Support users with MS Office, antivirus tools, mobile devices, and peripherals Use remote desktop software to resolve issues or walk clients through solutions Act as a liaison between customers and internal IT staff for accurate problem interpretation Maintain accurate ticketing and reporting in the help desk system QUALIFICATIONS Required: Experience: Minimum 1+ year of frontline IT support (help desk, service desk, or equivalent). Customer Service: Strong interpersonal, customer service, and follow-up skills with a focus on user satisfaction. Communication: Excellent written and verbal communication, including the ability to explain technical concepts to non-technical users. Work Style: Self-motivated, reliable, and able to work independently while managing multiple priorities. Operating Systems: Hands-on troubleshooting experience with Microsoft Windows 10 and Windows 11; familiarity with Windows Server 2016/2019. Software & Applications: Proficiency with Microsoft 365/Office 365 suite, endpoint security/antivirus tools, and common business applications. Hardware & Peripherals: Experience supporting desktops, laptops, printers, scanners, and mobile devices (iOS/Android). Networking: Basic understanding of TCP/IP, DNS, DHCP, and VPN concepts. Documentation: Strong documentation, ticketing, and research skills; experience with ITSM platforms (e.g., ConnectWise, ServiceNow, or similar) is a plus. Licensing & Compliance: Awareness of data security, acceptable use, and basic IT compliance practices. Other: Valid driver's license and ability to travel daily within the New York metropolitan area. Preferred (Nice to Have): CompTIA A+, Network+, or equivalent certification. Exposure to Active Directory (user accounts, password resets, group membership). Experience with remote support tools (TeamViewer, AnyDesk, RDP, etc.). Familiarity with basic IT asset management and inventory tracking. WHY JOIN TEC? Since 1981, TEC Building Systems has been a trusted leader in building automation. Based in Long Island City, we design and deliver custom control solutions for New York's most iconic projects. At TEC, you'll join a collaborative, future-focused team with opportunities for growth, training, and long-term career development.
    $55k-65k yearly 2d ago
  • Lead Plumbing Installer

    Bell Brothers 4.1company rating

    Sacramento, CA job

    About Bell Bros: At Bell Brothers Plumbing, Heating & Air, we are your gateway to a rewarding career in HVAC and plumbing services! We are proud to be a leading provider of heating, ventilation, air conditioning, windows, and plumbing solutions, and we believe that our success is rooted in the dedicated and passionate team members who make it all possible. We offer a culture of excellence, professional growth and development, cutting-edge technology and tools, a strong team environment, and competitive compensation and benefits. Job Overview: We are looking for an experienced Plumbing Install Lead to join our growing team! The successful candidate should be able to work efficiently, have great attention to detail, have exceptional multi-tasking skills, be organized, and be able to perform in a fast-paced environment. This is a full-time position. Must be available to work full shifts plus overtime. DUTIES AND RESPONSIBILITIES: · Cutting, assembling, and installing pipes and tubes with attention to existing infrastructure (e.g., electrical wiring) · Use various plumbing tools and equipment (pipe wrenches, pipe cutters, plungers, etc.) · Demonstrate respect and compassion when communicating with clients on work performed and on recommendations for repairs or replacement · Complete all tasks per company quality and safety standards SKILLS/QUALIFICATIONS: · Ability to handle physical workload (ability to lift 75lbs) · Strong communication and customer service skills, friendly and approachable · Analytical, focused on quality, and results-driven · Ability to understand and follow oral and written directions · Excel within a team environment and willing to support all areas of our business · Must be willing to undergo a background check, drug screen, and physical BENEFITS: · Competitive Pay · Medical, Dental, Vision, Life Insurance · 401K · PTO · Paid Holidays · Sick Pay #BELLP Pay Range$70,000-$150,000 USD We are an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Additionally, we will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the California Fair Chance Act. Bell Bros Privacy Policy
    $42k-60k yearly est. 2d ago
  • Winder I - 3rd Shift (11:00pm - 7:30 am) $23.00/hr. + $1.00/hr. Shift Differential

    Atkore 4.3company rating

    Atkore job in Pueblo, CO

    Who we are looking for: We are currently looking for a Winder I - 3rd Shift (11:00 p.m. to 7:30 a.m.) to be based out of Pueblo. Reporting to the Manufacturing Supervisor, the Winder I is responsible for quality, quantity, and accurate production of fiberglass conduit in various diameters while adhering all personal conduct based on Atkore' ATIRE protocols. What you'll do: The Winder's responsibilities include, but are not limited to: * Determine the correct number and type (epoxy or phenolic) of roving for scheduled product, string through the eye board and comb. * Confirm product to produce with the schedule, verify the following: the correct winding program is selected in the computer system, the correct mandrels with correct bells are loaded in the winding equipment. Should always have compliment of mandrels loaded. * Verify mandrel seals are present and in good condition. Move mandrel to winder, fill the resin bath. * Wind the initial conduit mandrel and verify all specifications including verification of angle, wind patterns (no gaps) and outside diameter (OD). The wet OD measurement will be slightly smaller than the cured product. The final OD confirmation will be performed on cured product. * Keep accurate production records. * Monitor conduit dimensional and aesthetics requirements by communication with the sawyer and adjusting as needed. * Ability to perform changeovers with assistance. * Perform simple maintenance tasks and responsible for housekeeping in your assigned area. * Perform shut down and cleaning procedures. * Perform any other tasks appointed by the management. What you'll bring: * Minimum educational requirement is a high school diploma or equivalent. * Two year's previous shop experience is preferred. * Excellent interpersonal and communication skills. * Good understanding of math skills required for quick and accurate counting, calculations and measurements including radius, inside and outside diameter, and length. * Attention to detail, accuracy, time management and organization. * Must be adaptable to changes in the work environment, comfortable with multiple competing demands and able to deal with frequent change, delays, or unexpected events in a calm and logical manner. * Must be able to work safely and efficiently in a fast-paced work environment. * Able to lift 50 pounds unassisted. * Able to be medically cleared to wear respirator and other PPE required for the job. Within 3 months, you'll: * Know and follow plant safety rules and wear proper PPE (safety glasses, ear plugs, steel-toed shoes, and high-vis clothing, and gloves, etc.) * Zero safety incidents in past 90 days of evaluation date. * Less than 15 attendance points on the date of evaluation. * No documented warnings within 90 days of probationary period. Who we are: Atkore is a five-time Great Place to Work certified company and a three-time Top Workplaces USA award winner! We're committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $23.00 per hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: * Medical, vision, and dental insurance * Life insurance * Short-term and long-term disability insurance * 401k * Paid Time Off * Paid holidays * Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Apply at ***********************
    $23 hourly 7d ago

Learn more about Atkore International jobs

Most common locations at Atkore International