Chemist jobs in West Windsor, NJ

The Associate Scientist MSAT Advanced Therapies Validation is responsible for validating supporting processes, implementing improvements within commercial manufacturing, and managing the lifecycle of these processes. The Associate Scientist acts as a Subject Matter Expert for validation studies, particularly in optimizing commercial manufacturing of lentiviral vectors, and liaises with various stakeholder departments. Responsibilities: Contribute to Life Cycle Management (LCM) and New Technology Introduction for the site. Execute validation of supporting processes (e.g.,mixing, sterilization, thermal processing, bio-decontamination). Support the introduction of new technologies and digitalization projects through validation protocol execution. Support the introduction of new materials via execution of validation protocols. Validate process parameters (e.g., process hold times). Contribute to Life Cycle Management projects. Act as Subject Matter Expert for one or more validation categories. Leverage the global MSAT network to identify and implement best practices. Author and review well-documented protocols and reports for all processes to be qualified/validated, in accordance with corporate/site guidelines, procedures, regulatory requirements, and industry best practices. Coordinate and support the execution of validation studies that conform to site standards and client guidelines, while meeting quality requirements. Support the site change control program by performing validation impact assessments and delivering the resulting implementation plan. Investigate deviations associated with process validation activities and oversee pre-validation and validation activities resulting from technical changes. Propose and formalize enhancements to qualification and validation processes and procedures to support process validation throughout the lifecycle and ensure program sustainability. Assist with writing Quality Risk Assessments for existing and new or changed processes. Ensure integration of global standards into local production processes. Support complex investigations and risk assessments. Act as SME during internal and external audits and inspections. Experience: Minimum of 2 years of relevant Manufacturing, Science, & Technology experience in the pharmaceutical industry. Experience with cell therapy manufacturing or viral vector manufacturing. GMP manufacturing and/or validation experience in pharmaceuticals. Skills in communication, planning, documentation, risk management, root cause problem-solving, and knowledge management. Understanding of regulatory requirements and industry guidelines for validation (e.g., FDA, EMA, ICH, ASTM, ISO, ISPE, PDA, etc.). Affinity with process technology and digitalization in manufacturing. Capable of successful delivery of local small projects, regional project work streams, or departmental programs under supervision. Selects applicable engineering/scientific tactics. Works independently within scope, requiring general guidance. Skills: Stem Cell Therapy Good Manufacturing Practices (GMP) Drug Manufacturing Education: BSc in Biochemistry, Biotechnology, Chemical Engineering, or a related field. Advanced degree (MSc/PhD) in Biochemistry, Biotechnology, Chemical Engineering. About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Recruiter Details: Name: Azhar Email: **************************** Internal Id: 25-53773

A Few Words About Us Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Job Description • The Analytical R&D Chemist will support the Formulations Group in developing and validating analytical methods for raw materials and finished products, reverse engineering of formulation components and analysis of stability samples. • The position will be primarily laboratory based and requires a strong background in chromatography and preferably in semi-solid dosage forms • The candidate will have a proven track record developing and validating GMP-compliant HPLC & GC methods to assess drug substance and product stability, have experience diagnosing and troubleshooting HPLC instrumentation • The scientist will routinely interact with other laboratory personnel, and will interact with vendors, customers, and business partners as necessary • Prepares technical documents, including method development/validation protocols and reports, analytical test procedures, technical reports, change controls to support FDA submissions • Executes method development and validation protocols for finished products • Reverse engineer formulation components using sample preparation and analytical procedures. • Evaluates the chemical and physical attributes of finished products such as pH, viscosity, water content, assay and content uniformity • Maintain the analytical lab including calibration, performance maintenance and log books • Ability to analyze, interpret and troubleshoot data • Follow Company's SOPs and ensure cGMP compliance • Assists in the investigation of OOS/QR and OOT data and assist in writing investigative documents • Responsible for maintaining laboratory housekeeping, cleanliness of laboratory equipment and workbenches, and other general lab responsibilities as assigned by supervisor • Might require to work on extended hours on an as-needed basis Qualifications • B.S./M.S. in chemistry, pharmacy or related discipline with 2+ years related experience • Previous experience in a cGMP laboratory setting • Ability to handle multiple projects, efficiently and timely manner • Knowledge of the generic industry, including ANDA submission • Experience with topical and ophthalmic products is preferred • Ability to work in a dynamic working environment Additional Information Thanks Warm Regards Ricky Bansal 732-429-1925

Penn Life Sciences is seeking a skilled Chemist (Manufacturing Associate) to join our team in Langhorne, PA. The Chemist (Manufacturing Associate) serves as a key manufacturing-facing technical resource, supporting investigations, documentation, and continued process verification to ensure consistent product quality and compliance with cGMP and regulatory requirements. The ideal candidate will bring hands-on experience in sterile manufacturing support, validation activities, and cross-functional collaboration within a regulated pharmaceutical environment. This position's responsibilities will include, but not be limited to the following: * Provide on-floor technical support to sterile manufacturing operations during routine production, validation, and qualification activities. * Prepare, execute, and support the review of manufacturing-related validation documentation, including IQ, OQ, PQ, process validation, and continued process verification activities. * Support deviation investigations, root cause analyses, and CAPA development related to manufacturing, validation, or qualification activities. * Evaluate manufacturing changes and support change control activities related to processes, equipment, facilities, utilities, and procedures. * Collaborate cross-functionally with Quality, Validation, Engineering, and Technical Services to ensure alignment across manufacturing activities. * Support regulatory inspections, audits, and internal assessments related to manufacturing and validation activities. We are looking for applicants with: * Bachelor's degree in Chemistry, Biochemistry, Pharmaceutical Sciences, Chemical Engineering, or a closely related scientific discipline required; Master's degree preferred. * 2-5 years of experience supporting pharmaceutical manufacturing, validation, or technical operations in a cGMP-regulated environment. * Prior experience in sterile or aseptic manufacturing environments strongly preferred. * Working knowledge of cGMP requirements (21 CFR Parts 210/211) and experience supporting validation and continued process verification activities. * Strong technical writing, documentation review, and cross-functional communication skills. What we offer: * 401(k) with company match * Health, vision, and dental Insurance * Childcare expense reimbursement * Tuition reimbursement * Annual bonus eligibility * Annual merit increases * Paid Time Off and Flexible Holidays Penn Life Sciences is an affirmative action/equal opportunity employer and does not discriminate in hiring or employment on the basis of age, sex, race, color, religion, national origin, gender identity, veteran status, sexual orientation or any other protected status. We encourage you to apply if you feel that you are a match! We look forward to hearing from you.

Iselin, NJ Engineering - Chemical EXP 1-2 yrs DEG Doctorate Relo Job Description The Analytics and Materials Characterization group in Iselin, NJ is part of the Catalyst Research and Development department. We provide direct analytical support to catalyst research and manufacturing platforms, including environmental, refining, chemical, solar cell and battery materials. This position is for a highly motivated Microscopist/Material Scientist to work as part of an electron microscopy group involving the characterization of catalysts, their precursors, associated assembly components and related materials. The successful candidate will have a strong materials science, analytical and catalyst background with an emphasis on microscopic evaluations, and thrive on leadership roles in multi-disciplinary catalyst research teams. Responsibilities include but are not limited to: -Operating and maintaining Microscopy instrumentation including HR FE-SEM (High Resolution Field Emission Scanning Electron Microscopy) and VP-SEM (Variable Pressure Scanning Electron Microscopy) with ancillary attachments: EDS (Energy Dispersive X-ray Spectroscopy), WDS (Wavelength-Dispersive X-Ray Spectroscopy) and STEM (Scanning and Transmission Electron Microscopy) and image analyses software suite -Supporting other microscopy areas like EPMA (Electron Probe Microanalyzer) or TEM (Transmission electron microscopy) -Collaborating with research scientists, engineers, and manufacturing associates on new-product development, fundamentals understanding and manufacturing support, with strong catalyst chemistry knowledge -Interpreting results, writing reports and sharing information with a high degree of accuracy in a fast paced analytical chemistry laboratory -Developing new microscopy capabilities, investigative strategies, and innovative microscopy methods to support knowledge and product development -Preparing a wide variety of sample types for SEM/STEM analyses using vacuum evaporation systems, microtome and trimmer; knowledge of ion-milling, FIB (Focused Ion Beam), tripod polishing, etching, and electro-polishing a plus Qualifications -PhD in materials science, physics, engineering, chemistry or related degree with 1+ years related analysis and laboratory experience preferably in industry, OR a MS degree in materials science, physics, engineering, chemistry or related degree with 3+ years of relevant industrial experience or BS degree with a minimum of 5+ years of relevant industrial experience -Strong theoretical and practical understanding of EM technologies with extensive hands on experience in solving complex materials problems using primarily FE-SEM and other technologies like VP-SEM, STEM, TEM or EPMA Solid materials characterization and heterogeneous catalysis knowledge Ability to participate at a leadership level within multi-disciplinary teams Hands-on experience in experimental design using EM and methods development for EM Knowledge of crystallography and diffraction techniques (EBSD, electron backscatter diffraction) a plus Knowledge of related AEM (Analytical Electron Microscopy) equipment and methodologies a plus Expected to work independently with minimum supervision as well as part of a team Strong organizational, time management and multi-tasking skills Demonstrated track record of a systematic approach to problem solving critical thinking skills SKILLS AND CERTIFICATIONS Does this candidate have heterogeneous catalysis and microscopy experience? IDEAL CANDIDATE Heterogeneous catalysis and microscopy experience REQUIRED Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

Full-time Description The Upstream Manufacturing Scientist is responsible for executing mammalian cell culture processes and producing recombinant proteins for a wide range of mammalian based biosimilars. The candidate will be responsible for executing cell culture batches from 50 L to 1000 L volumes engineering and clinical batches in a cGMP environment. This position requires technical expertise in bioreactor operations, cell biology and knowledge of initiating batch records, protocols, investigations and other technical documents. Work in a team environment to execute batches and can work independently with minimum supervision. Essential Duties & Responsibilities • Work with a collaborative team of manufacturing associates and engineers to execute upstream batches. • Perform cell culture and bioreactor operations at multiple scales. • Ensure that engineering and clinical batches are executed in a timely manner. • Establishes operating equipment specifications and improves manufacturing techniques. • Uses programs to collect and evaluate operating data to conduct on- line adjustments to products, instruments or equipment. • Ability to interpret and provide instructions furnished in written, oral, diagram, or schedule form. • Should follow GMP instructions in the manufacturing area and take the lead to follow environmental health and safety policies. • Review executed manufacturing and packaging batch records, executed and associated supporting documents. • Coordinate the conduction of investigations and corrections for issues found during the batch execution process. • Performs other functions as required or assigned. • Complies with all company policies and standards. Requirements Education and Experience • Requires a Bachelor or Master' degree in chemical, biological or biochemical sciences and a minimum of 3+ years of related experience in the biopharmaceutical industry. • Expertise in independently conducting and directing the design, execution, analysis, and documentation of all states of process development. • Strong fundamental knowledge and subject matter expertise to execute engineering and clinical batches. • Previous experience working in GMP and aseptic manufacturing environment. • Experience working with single use manufacturing consumables such as bags, tube sets, columns and process manifolds. Specialized Knowledge and Skills • Ability to work with other team members and independently - good interpersonal skills. • Good communication skills: verbal and written, good computer and organization skills, detail oriented. • Basic computer skills, including knowledge of Word, Excel and spread sheet. • Knowledgeable in GMP batch manufacturing and packaging documentation; audit and review. • Knowledgeable in cleaning verification/validation.

Scientist II, Drug Product Development WuXi Biologics Cranbury, New Jersey, United States (On-site) Job Title - Scientist ll, Drug Product Development and Manufacturing WuXi Biologics is a is a leading global open-access biologics technology platform offering end-to-end solutions to empower organizations to discover, develop, and manufacture biologics from concept to commercial manufacturing. WuXi Biologics' achievements are a direct result of the efforts made by our employees. We have built an extraordinary team motivated by our PROUD culture of Passion, Reward, Opportunity, Unity, and Determination. WuXi Biologics offers exciting job opportunities and careers around the globe. We currently employ over 12,000 people and provide services to more than 600 customers worldwide, including all the top 20 biopharmaceutical companies. Job Summary Drug product development and manufacturing (DP) is seeking a scientist to join our department. The successful candidate will be expected to work as part of a team that focuses on the activities including but not limited to formulation development, drug product manufacturing process development and technical transfer, clinical in use compatibility study, and clinical drug product manufacturing. Work closely with analytical sciences (AS) and process development and drug product manufacturing teams to lead drug product process development and manufacturing projects. Responsible for study design, execution and troubleshooting to meet client project deliverables. Author technical documents including SOPs, protocols, study reports, etc. Responsibilities * Adhere to WuXi Biologics' quality system and work under cGMP to manufacturing clinical drug products. * Execute drug product manufacturing processes development and tech transfer. * Execute liquid formulation development and fill/finish process scaled down model. * Develop injectable drug product manufacturing process including container closure selection, drug product compatibility with manufacturing process, and provide tech transfer and manufacturing support including deviation investigation and trouble shooting. * Author technical documents including SOPs, protocols, study reports, and support regulatory filing. * Support protein analyses and biophysical characterization of protein drug products in conjunction with analytical science team and process development team. * Apply scientific knowledge and experience to assigned projects. Interface extensively in a matrixed environment with process development, analytical development and manufacturing teams for process investigation support, assess new formulation/DPD technologies, support on-going and upcoming client projects. * Communicate effectively on the findings of research and development internally and externally to ensure alignment among WuXi Biologics and with clients. Preferred: * Drug product process development experience with large molecules for parenteral administration * Development and characterization of aseptic fill and finish operations including freeze/thaw, compounding, mixing, sterile filtration, filling, stoppering, visual inspection, * Manufacturing experience of biologics drug product in clinical settings. * Experience in biophysical characterization of the biologics drug products. Qualifications: * PhD with 0-2 years of experience in Pharmaceutics, Pharmaceutical Sciences, Pharmaceutical Chemistry or Chemistry Candidate must possess knowledge in formulation, and drug product process development areas. Understand current industry practice and scientific reasoning for biologics drug product process development. * Be qualified to work in cGMP environment. With hands-on experience with Vanrx Robotic filling system. * Strong communications skills. Great team player and ability to build positive collaboration with internal stakeholders, vendors and clients to achieve alignment and work effectively. * Must work in a self-motivated, multiple tasks, highly flexible, well-organized and detailed-oriented style. * May require some evening work hours and conference call time to meet global team time zones. * The does not intend to list all the duties and responsibilities assigned to this position. Employees holding this position are required to perform other job-related duties/responsibilities based on their expertise and company business needs. The Anticipated salary for this position is $70,000-110,000 The job description does not intend to list all the duties and responsibilities assigned to this position. Employee holding this position would be required to perform other job-related duties/responsibilities based on their expertise and company business needs. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability

Job DescriptionSalary: Princeton NuEnergy (PNE) is excited to announce future opportunities to join our innovative Research & Development team, focused on pioneering advancements in the direct recycling and upcycling of spent Lithium-ion battery materials. Our mission is to deliver a cost-efficient, environmentally friendly solution to the current industry pain points of high operational costs and low efficiency in battery recycling. We aim to solve these challenges by improving battery recycling efficiency and purity, thereby revolutionizing the lithium-ion battery recycling landscape. About Us: PNE is a lithium-ion battery direct recycling and critical materials recovery innovator, founded out of Princeton University. At its core, PNE's patented recycling technology is based on a low-temperature plasma-assisted separation process (LPAS) that does not damage but, rather, reclaims and repairs cathode material from spent lithium-ion batteries and manufacturing scrap at half the cost with significantly lower waste when compared with existing traditional recycling processes. Our state-of-the-art laboratory is located in Princeton, New Jersey, where we are dedicated to pushing the boundaries of sustainable energy technologies. We are building a team of passionate and talented individuals to drive forward our cutting-edge research initiatives. Potential Roles: We anticipate openings for the following positions in the near future: Research Scientist Process Engineer Technician Ideal Candidates: We welcome applications from candidates with expertise in: Battery cathode material synthesis and related research experience. Plasma physics, particularly in device development and experimental applications. Chemical Engineering (with a focus on inorganic chemistry), Materials Science & Engineering, Chemistry, or related areas of study. If you are passionate about sustainability, innovation, and advancing the future of energy storage, we would love to hear from you! Princeton NuEnergy, Inc. is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status under federal, state, and local laws.

The Quality Control Chemist-II is responsible for performing a variety of complex analytical testing, ensuring the quality of dietary supplements and OTC products through testing, documentation, and compliance with regulatory standards. This position also involves reviewing and maintaining SOPs, Testing Procedures, calibrations, and other controlled documents to support quality assurance activities. Additionally, the Chemist-II will assist with troubleshooting and minor repairs of laboratory equipment and support stability testing and documentation. This mid-level position will require more independent work, the ability to mentor QC chemist-I and Lab Tech personnel, and involvement in process improvements and corrective actions. ESSENTIAL FUNCTIONS ( Essential functions, as defined under the Americans with Disabilities Act, may include the following tasks, knowledge, skills and other characteristics. This list of tasks is illustrative ONLY and is not a comprehensive listing of all functions and tasks performed by positions in this class. It does not imply that all positions within the class perform all of the duties listed, nor does it necessarily list all possible duties that may be assigned.) Coordinates with other QC Supervisors and laboratory management so that the shared resources such as laboratory instruments, reagents, etc. are available for assigned staff to perform their job duties effectively and efficiently. Performs the pharmaceutical OTC & Dietary supplement analysis to support OTC & Dietary Supplement manufacturing which includes assay, impurity, dissolution testing, content uniformity, and physical testing. Conduct Analysis in compliance with cGMP requirements, compendia standards, and internal procedures. Maintain accurate record of analysis and perform documentation to company standards Perform laboratory analysis right first time, contemporaneous documentation, analyze and document the results. Notify manager immediately of nonconforming data or unexpected occurrences. Reviews and analyzes the stability samples and associated analytical data, prepares or assists in preparing Stability Summary Reports for Annual Product Review Reports. Reviews/Checks of analytical data by following test methods/SOPs. Performs operational qualification on analytical instruments, analytical method verification/validations, validation protocols and reports for analytical methods. Conducts laboratory investigation (OOS/OOT) under the supervision of laboratory management. Organize work schedule to complete assigned tasks efficiently and on schedule. Work under direction provided by supervisor and other duties as assigned Assist in Training and monitoring of the new hires (trainees) in learning or performing basic skills and assists in evaluating the need of any potential equipment for laboratory. Ensures the laboratory is kept in a safe working environment and in compliance with OSHA and other laboratory safety standards. Maintains knowledge of the latest guidelines of regulatory requirements of International Conference of Harmonization, USP, USFDA and OSHA. Complies with all regulatory/ in-house requirements may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, cGLP, documentation. Assists in compilation of regulatory documents. Managing the Pharmacopeia changes and up gradation and implementing the same after upgrading the change repeated documents through proper channels of change control and training to all concerned. EXPERIENCE AND QUALIFICATIONS T o perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the experience and education required : EDUCATION & EXPERIENCE o Bachelors degree in Chemistry or related science field with eight (8) to ten (10) years lab experience in a pharmaceutical chemical or related industrial experience; preferably solid dosage forms manufacturing. Method Development experience is preferred. o Masters degree or higher with six (6) to eight (8) years of progressive lab experience in a pharmaceutical chemical or related industry; preferably generic pharmaceuticals. Method Development experience is preferred. o Demonstrated skills and experience in leading a group of QC Chemists. COMPUTER SKILLS o Basic knowledge of computers using MS Office, MS Outlook and business software systems commonly used in the pharmaceutical industry required. MATHEMATICAL SKILLS o Requires a strong knowledge of algebra, calculus and statistics and how they are applied. o Math skills commensurate with scientific background are required. KNOWLEDGE, SKILLS AND ABILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and abilities required : INDUSTRY KNOWLEDGE: Knowledge and experience of applicable FDA regulatory standards and requirements for the solid oral dosage manufacturing required. Knowledge of analysis of pharmaceutical dosage forms and raw materials utilizing HPLC, GC, ICP-MS, UV, TLC, dissolution testing, spectroscopic and wet chemistry techniques is a plus. COMMUNICATION SKILLS: Advance level of written and verbal communication skills with the ability to read, technical procedures or governmental regulations. Ability to write reports, and required documentations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Must possess initiative and trouble shooting ability.

Gelest, Inc., part of the Mitsubishi Chemical Group, is hiring a Development Chemist to join our team in Morrisville, PA. This role offers the opportunity to contribute to our mission of delivering innovative specialty chemical solutions to customers worldwide. The Development Chemist will play a key role in designing, developing, and optimizing chemical processes for specialty chemical products. This hands-on role involves synthetic organic chemistry, process development from lab to pilot scale, and data acquisition and analysis to ensure safe, reliable, and cost-effective manufacturing. The Development Chemist will collaborate closely with Product Development, Engineering, Production, and Quality teams to translate laboratory discoveries into scalable processes that meet business and regulatory requirements. **PRINCIPAL ACCOUNTABILITIES:** + Design and perform laboratory experiments involving synthetic organic reactions, route evaluation, optimization, and troubleshooting. + Generate and analyze process data to identify improvement opportunities. + Scale laboratory processes to pilot and full production, ensuring robust transfer of technology and clear documentation. + Utilize analytical techniques (GC, NMR, FTIR, MS) to characterize materials, monitor reactions, and assess process performance. + Document experiments, observations, and recommended improvements in lab notebooks and technical reports. + Support process hazard assessments, safety reviews, and compliance with environmental, health, and safety regulations. + Maintain awareness of industry developments, new technologies, and specialty chemical manufacturing best practices. + Perform other duties as assigned. **KNOWLEDGE/ EXPERIENCE/SKILLS:** To perform the job successfully, an individual should demonstrate the following competencies: + Bachelor's degree in Chemistry, Chemical Engineering, or a related field. Master's degree preferred. + 1-3+ years of experience in specialty chemical synthesis, chemical process development, or scale-up preferred. + Hands-on experience with laboratory techniques and equipment preferred. + Background in synthetic organic chemistry, including multi-step synthesis and reaction mechanism understanding is preferred. + Experience with process development, including reaction kinetics, heat, and mass transfer, mixing, and scale-up considerations is preferred. + Hands-on experience with analytical instrumentation (GC, NMR, FTIR, MS) is preferred. + Excellent written and verbal communication, including technical reporting. + Commitment to maintaining a safe and compliant work environment. + Must be able to wear required PPE (safety shoes, glasses, gloves, hard hat; respirators as needed). + Must be able to climb ladders and stairs to collect samples and observe processes. + Must be able to lift up to 50 pounds and operate a forklift. + **Must be able to work 2nd shift:** Four (4) 10-hour shifts, Monday-Thursday, 12:30 PM - 11:00 PM **Supplemental Company Information:** Gelest, located in Morrisville, PA-conveniently accessible from Interstate 95, Route 1, and the PA/NJ Turnpikes-offers a rewarding career with competitive pay and a comprehensive benefits package, including: + Generous paid time off + Medical, Dental, Vision, and optional supplemental plans for employees and their families + 401(k) with a competitive company match + Company-paid Life Insurance, AD&D, Short-Term Disability, and Long-Term Disability + Eligibility for an annual performance bonus + Company-provided uniforms, work boots, and PPE The salary range for this position is $27.00 (entry level) - $35.00 per hour. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting.

At Weston Solutions, Inc. you will do meaningful work and make valuable contributions. Employee ownership at Weston is a path to professional growth and access to diverse opportunities in a highly connected community that works together across key service areas to make a difference in the environment. Weston has continued to evolve and adapt to our changing world as a premier provider of environmental and infrastructure services for over sixty years. In both the public and private sectors our teams help identify, solve, mitigate, and manage critical environmental issues to help clients achieve a more sustainable future. Weston is seeking an experienced Senior Laboratory Chemist to conduct both routine and complex GC/MS analyses of organic compounds in environmental media including air, soil, water, and oil. Work will be performed in both fixed laboratory settings and mobile lab deployments, supporting a wide range of environmental investigations and emergency response efforts. This is a dynamic opportunity for a seasoned chemist to play a critical role on an emergency response team and collaborate closely with clients as technical experts. Location: Edison, NJ U.S. Citizenship Required Expected Outcomes: * Perform GC/MS analyses in mobile and fixed laboratory environments. * Conduct analysis using EPA methods such as 8260, 8270, and TO series. * Prepare standards and reagents. * Interpret mass spectral data using libraries to elucidate compound structures. * Prepare clear and concise reports based on analytical data. * Operate, maintain, calibrate, and troubleshoot laboratory instruments and equipment. * Safely manage hazardous materials in a laboratory setting. * Develop and validate methods using GC with detectors including FID, PID, and MS. * Prepare samples using techniques such as dissolution, liquid-liquid extraction, separatory funnel extraction, Soxtherm extraction, and solid phase extraction. Knowledge, Skills & Abilities: * B.S. degree in Chemistry or a closely related scientific discipline with at least 30 hours of Chemistry coursework. * Minimum 10 years of analytical chemistry experience, including 5 years of hands-on instrument operation. * Experience with Toxic Organic (TO) air methods and/or SW-846 methods for soil, water, and oil organic analyses. * General knowledge of organic chemistry fundamentals, chromatography, and mass spectrometry theory. * Familiarity with Laboratory Information Management Systems (LIMS). * Strong working knowledge of EPA analytical methods and environmental regulations. * Understanding hazardous waste characterization, storage, and labeling requirements. * Ability to travel for up to two weeks at a time, potentially up to 25% annually. * Highly organized, self-motivated, and capable of working independently with minimal supervision. Preferred Skills: * Experience with vapor intrusion sampling using summa canisters and Tedlar bags. * Ability to prepare Site-Specific Quality Assurance Project Plans and Technical Reports. * Proficiency in computer applications and ability to quickly learn new software. * Familiarity with the Incident Command System (ICS), especially ICS 100, 200, 700, and 800 courses (completion is a plus). * Proven ability to manage multiple tasks in a fast-paced environment. * Strong organizational, communication, and problem-solving skills. * Proficient in Microsoft Office applications including Outlook, Word, and Excel. * Willingness to travel for field assignments, including mobile lab deployments. * 40-Hour HAZWOPER certification. * Ability to work in PPE Levels D/C. We fully invest in our people: Weston provides a generous, comprehensive benefits package program that offers employees high value options with solid financial protection, meeting the personal needs of its people and their families. * Medical, Dental, Vision, 401K with base and matching employer stock contributions. * Paid time off includes personal, holiday and parental. * Life and disability plans. * Critical illness and accident plans. * Work/Life flexibility. * Professional development opportunities. Compensation will vary based upon experience, education, skill level, and other compensable factors.

FLSA Status: Non-exempt/Hourly Schedule: 8:00AM - 4:30PM, Monday - Friday. Occasional 2nd shift work required Are you interested in growing your laboratory career at a fact-paced and expanding environmental testing laboratory? If so, we may have a great role for you; Criterion's Laboratory Analyst (PLM) role primarily performs precise and timely analysis of asbestos bulk samples using polarized light microscopy techniques. This role is responsible for adhering to quality assurance and quality control standards, following Criterion Laboratories' Laboratory Safety Procedures, ensuring a clean work environment, and fostering effective collaboration within a team environment. Essential Duties and Responsibilities: Uses polarized light microscopy to conduct detailed analysis of bulk samples for the identification and quantification of asbestos fibers. Adheres to established analytical protocols and procedures to ensure reliable and reproducible results. Maintains rigorous quality assurance practices to uphold data integrity and compliance with regulatory requirements. Adheres to safety protocols to ensure a secure work environment for all personnel. Maintains cleanliness and organization of the workspace to prevent contamination and ensure optimal working conditions. Collaborates effectively with team members to achieve departmental objectives and contribute to a positive team culture. Participates in training programs and stays abreast of advancements in polarized light microscopy techniques and asbestos analysis methodologies. Requirements Required Knowledge and Experience: At least six (6) months experience performing analyses via polarized light microscopy Familiarity with regulatory requirements and standards pertaining to asbestos analysis is preferred. Strong attention to detail and the ability to maintain accuracy under tight deadlines. Excellent organizational and communication skills, both verbal and written. Demonstrated ability to work both independently and collaboratively within a team environment. Commitment to maintaining high safety standards and promoting a culture of safety in the workplace. Required Education, Certifications, and Licenses: Bachelor's degree in a relevant scientific field (e.g., Geology, Biology, Chemistry, Environmental Science) and/or an equivalent amount of education and experience. Physical and Mental Requirements: Ability to perform microscopy work for extended periods, including sitting or standing. Capability to lift and handle sample containers and equipment (up to 25 pounds).

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Dayton, NJ laboratory is seeking an entry-level Lab Technician I to join their General Chemistry team! The Lab Technician I will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. Work independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. Always follow safe laboratory practices and maintain a safe working environment. Job Functions After appropriate training independently prepare samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologies Performs routine operation, maintenance, calibration of prep instruments/equipment May assist with validation and MDL studies. Inputs and maintains technical information as needed to support the laboratory functions/operations. Maintains Laboratory Notebook where applicable. Adheres to internal standards, policies, and procedures. Performs other duties as required. Qualifications High school diploma (Required) 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required) Associates Degree in a Chemistry or similar scientific discipline (Preferred) 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) Language Skills: English (Required) Mathematical Skills: Basic (Required) Reasoning Skills/Abilities: Basic (Required) Computer Skills: Basic (Required) Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Job DescriptionDescription: FLSA Status: Non-exempt/Hourly Schedule: 8:00AM - 4:30PM, Monday - Friday. Occasional 2nd shift work required Are you interested in growing your laboratory career at a fact-paced and expanding environmental testing laboratory? If so, we may have a great role for you; Criterion's Laboratory Analyst (PLM) role primarily performs precise and timely analysis of asbestos bulk samples using polarized light microscopy techniques. This role is responsible for adhering to quality assurance and quality control standards, following Criterion Laboratories' Laboratory Safety Procedures, ensuring a clean work environment, and fostering effective collaboration within a team environment. Essential Duties and Responsibilities: Uses polarized light microscopy to conduct detailed analysis of bulk samples for the identification and quantification of asbestos fibers. Adheres to established analytical protocols and procedures to ensure reliable and reproducible results. Maintains rigorous quality assurance practices to uphold data integrity and compliance with regulatory requirements. Adheres to safety protocols to ensure a secure work environment for all personnel. Maintains cleanliness and organization of the workspace to prevent contamination and ensure optimal working conditions. Collaborates effectively with team members to achieve departmental objectives and contribute to a positive team culture. Participates in training programs and stays abreast of advancements in polarized light microscopy techniques and asbestos analysis methodologies. Requirements: Required Knowledge and Experience: At least six (6) months experience performing analyses via polarized light microscopy Familiarity with regulatory requirements and standards pertaining to asbestos analysis is preferred. Strong attention to detail and the ability to maintain accuracy under tight deadlines. Excellent organizational and communication skills, both verbal and written. Demonstrated ability to work both independently and collaboratively within a team environment. Commitment to maintaining high safety standards and promoting a culture of safety in the workplace. Required Education, Certifications, and Licenses: Bachelor's degree in a relevant scientific field (e.g., Geology, Biology, Chemistry, Environmental Science) and/or an equivalent amount of education and experience. Physical and Mental Requirements: Ability to perform microscopy work for extended periods, including sitting or standing. Capability to lift and handle sample containers and equipment (up to 25 pounds).

A Few Words About Us - Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Job Description • Generic Pharma industry experience • Prefer experience in Dermatology products • Prefer R&D experience also Qualifications BS with 5-6 year experience or MS with 2-3 year experience. Additional Information Regards, Sukhpreet Basra Clinical Recruiter Integrated Resources, Inc. IT Life Sciences Allied Healthcare CRO Certified MBE |GSA - Schedule 66 I GSA - Schedule 621I Direct:732-429-1921 (Tel) 732-549-2030*241 | (F) 732-549-5549

The Upstream Manufacturing Scientist is responsible for executing mammalian cell culture processes and producing recombinant proteins for a wide range of mammalian based biosimilars. The candidate will be responsible for executing cell culture batches from 50 L to 1000 L volumes engineering and clinical batches in a cGMP environment. This position requires technical expertise in bioreactor operations, cell biology and knowledge of initiating batch records, protocols, investigations and other technical documents. Work in a team environment to execute batches and can work independently with minimum supervision. Essential Duties & Responsibilities • Work with a collaborative team of manufacturing associates and engineers to execute upstream batches. • Perform cell culture and bioreactor operations at multiple scales. • Ensure that engineering and clinical batches are executed in a timely manner. • Establishes operating equipment specifications and improves manufacturing techniques. • Uses programs to collect and evaluate operating data to conduct on- line adjustments to products, instruments or equipment. • Ability to interpret and provide instructions furnished in written, oral, diagram, or schedule form. • Should follow GMP instructions in the manufacturing area and take the lead to follow environmental health and safety policies. • Review executed manufacturing and packaging batch records, executed and associated supporting documents. • Coordinate the conduction of investigations and corrections for issues found during the batch execution process. • Performs other functions as required or assigned. • Complies with all company policies and standards. Requirements Education and Experience • Requires a Bachelor or Master' degree in chemical, biological or biochemical sciences and a minimum of 3+ years of related experience in the biopharmaceutical industry. • Expertise in independently conducting and directing the design, execution, analysis, and documentation of all states of process development. • Strong fundamental knowledge and subject matter expertise to execute engineering and clinical batches. • Previous experience working in GMP and aseptic manufacturing environment. • Experience working with single use manufacturing consumables such as bags, tube sets, columns and process manifolds. Specialized Knowledge and Skills • Ability to work with other team members and independently - good interpersonal skills. • Good communication skills: verbal and written, good computer and organization skills, detail oriented. • Basic computer skills, including knowledge of Word, Excel and spread sheet. • Knowledgeable in GMP batch manufacturing and packaging documentation; audit and review. • Knowledgeable in cleaning verification/validation.

Gelest, Inc., part of the Mitsubishi Chemical Group, is hiring a Process Chemist to join our team in Morrisville, PA. This role offers the opportunity to contribute to our mission of delivering innovative specialty chemical solutions to customers worldwide. The Process Chemist is responsible for synthesizing and purifying existing and custom compounds to ensure efficient, cost-effective, and safe production of chemical compounds and products. This role involves collaboration with various departments, including research and development (R&D), quality control, and production, to ensure that processes meet industry standards and regulatory requirements. **PRINCIPAL ACCOUNTABILITIES:** + Process development, scale-up and manufacturing of various organosilanes, silicones and metal-organic compounds on a scale from 1 liter to multi-tons. + Independently carry out chemical reactions, perform purification techniques and evaluate analytical results of synthesized products. Use feedback from processes to make necessary adjustments. + Monitor and optimize chemical production processes to maximize efficiency, yield, and quality. + Investigate and resolve production issues, ensuring minimal disruption to manufacturing schedules. + Ensure production processes comply with industry standards, regulatory requirements, and internal quality control protocols. + Document all production activities, including preliminary paperwork, process parameters, deviations, and corrective actions. + Operate various pieces of production and support equipment including drums, analytical equipment, forklifts and other equipment as needed. + Work in a team setting and convey information about the status of reactions to others. + Promote and enforce adherence to safety protocols and environmental regulations. + Responsible for maintaining cleanliness and good working conditions in all work areas. + Other duties as assigned. **KNOWLEDGE/ EXPERIENCE/SKILLS:** + Minimum 2 years college chemistry required. Bachelor's degree, or equivalent experience, preferred. + Excellent verbal and written communication skills. + Strong analytical and problem-solving skills. + Proficient with Microsoft Office Suite or related software. + Frequent lifting of up to and over 50 lbs. + Stand for extended periods, lift heavy equipment, operate various hand tools and wear personal protective equipment (PPE). + Able to operate or learn to operate a forklift + Be aware of fire, safety and chemical hazards. + Pass respirator fit test as required by OSHA + Must be able to hear and respond to all communications and alarms + Ability to work 12-hour shifts. + Availability to consider fixed weekday day/night and weekend day/night schedule(s) based on company open position needs. **Supplemental Company Information:** Gelest, located in Morrisville, PA-conveniently accessible from Interstate 95, Route 1, and the PA/NJ Turnpikes-offers a rewarding career with competitive pay and a comprehensive benefits package, including: + Generous paid time off + Medical, Dental, Vision, and optional supplemental plans for employees and their families + 401(k) with a competitive company match + Company-paid Life Insurance, AD&D, Short-Term Disability, and Long-Term Disability + Eligibility for an annual performance bonus + Company-provided uniforms, work boots, and PPE The salary range for this position is $27.00 (entry level) - $33.00 per hour. Factors such as scope and responsibilities of the position, **candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered.** This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting.

Penn Life Sciences is seeking a detail-oriented QC Chemist I to join our team in Langhorne, PA. The QC Chemist I performs routine analytical testing in support of sterile drug product manufacturing, batch release, and stability programs within a cGMP-regulated environment. This role is responsible for generating accurate, compliant laboratory data while executing approved analytical methods and maintaining strict adherence to data integrity and documentation standards. The ideal candidate will have a strong foundation in analytical chemistry, a commitment to quality, and the ability to work effectively within a regulated Quality Control laboratory. This position's responsibilities will include, but not be limited to the following: * Perform routine analytical testing of raw materials, in-process samples, finished drug products, and stability samples using approved QC methods. * Execute wet chemistry and instrumental analyses in compliance with validated methods, specifications, and cGMP requirements. * Accurately document laboratory activities, results, and calculations in laboratory notebooks and electronic systems in accordance with ALCOA+ data integrity principles. * Operate assigned analytical instruments and perform routine checks, calibrations, and basic troubleshooting in accordance with SOPs. * Support stability programs, laboratory investigations (including deviations and OOS events), and analytical data review activities under supervision. * Maintain laboratory organization, sample traceability, and inspection readiness while adhering to all applicable safety and regulatory requirements. We are looking for applicants with: * Bachelor's degree in Chemistry, Analytical Chemistry, Pharmaceutical Sciences, or a closely related scientific discipline required. * 0-3 years of analytical laboratory experience in a pharmaceutical, biotechnology, or regulated laboratory environment; academic laboratory experience will be considered. * Working knowledge of analytical techniques such as HPLC/UPLC, UV-Vis spectroscopy, pH, Karl Fischer, TOC, dissolution, or particle size analysis. * Understanding of good documentation practices and data integrity expectations within a QC laboratory. * Strong organizational, analytical, and communication skills with a high attention to detail. What we offer: * 401(k) with company match * Health, vision, and dental Insurance * Childcare expense reimbursement * Tuition reimbursement * Annual bonus eligibility * Annual merit increases * Paid Time Off and Flexible Holidays Penn Life Sciences is an affirmative action/equal opportunity employer and does not discriminate in hiring or employment on the basis of age, sex, race, color, religion, national origin, gender identity, veteran status, sexual orientation or any other protected status. We encourage you to apply if you feel that you are a match! We look forward to hearing from you.

SGS is the world's leading Testing, Inspection and Certification company. We operate a network of over 2,700 laboratories and business facilities across 119 countries, supported by a team of 99,250 dedicated professionals. With over 145 years of service excellence, we combine the precision and accuracy that define Swiss companies to help organizations achieve the highest standards of quality, safety and compliance. Our brand promise, when you need to be sure , underscores our commitment to reliability, integrity and trust - enabling businesses to thrive with confidence. We proudly deliver our expert services through the SGS name and trusted specialized brands, including Brightsight, Bluesign, Maine Pointe and Nutrasource. SGS is publicly traded on the SIX Swiss Exchange under the ticker symbol SGSN (ISIN CH0002497458, Reuters SGSN.S, Bloomberg SGSN:SW). Our Dayton, NJ laboratory is looking for a Laboratory Analyst to join their Volatiles team! The Laboratory Analyst prepares and analyzes samples with accuracy and precision in accordance to SGS' analytical SOPs. The Laboratory Analyst works independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. The Laboratory Analyst understands and applies basic analytical chemistry principles. The Laboratory Analyst always follows safe laboratory practices and maintains a safe working environment. Job functions: After appropriate training independently prepares and analyzes samples according to SGS' analytical SOPs using instrumentation specific to the department and analytical methodologies Performs routine operation, maintenance, calibration of laboratory instruments/equipment May assist with validation and MDL studies. Assists with investigation, and preparation of responses to client inquiries and CARs. Inputs and maintains technical information as needed to support the laboratory functions/operations. Maintains Laboratory Notebook where applicable. Adheres to internal standards, policies and procedures. Performs other duties as assigned. Qualifications Associate Degree in a Chemistry or similar scientific discipline and 0-2 years of experience in Analytical Chemistry Laboratories OR 3 years of relevant experience (i.e. Sample Prep) (Required) Bachelor's Degree in a Chemistry or similar scientific discipline and 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) Basic mathematical and reasoning skills (Required) Experience with Microsoft Office (Excel, Outlook, Word) (Required) Experience with LIMS (Preferred) Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

A Few Words About Us - Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Job Description • Generic Pharma industry experience • Prefer experience in Dermatology products • Prefer R&D experience also Qualifications BS with 5-6 year experience or MS with 2-3 year experience. Additional Information Regards, Sukhpreet Basra Clinical Recruiter Integrated Resources, Inc. IT Life Sciences Allied Healthcare CRO Certified MBE |GSA - Schedule 66 I GSA - Schedule 621I Direct:732-429-1921 (Tel) 732-549-2030*241 | (F) 732-549-5549