Computer numerical controller machinist jobs in Franklin, WI

The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. 1. Set up; edit and operate CNC lathes. 2. Inspect completed parts to ensure conformance to specifications. 3. Cleans work area. 4. Remove tooling, fixturing, and return inspection equipment to proper area. 5. Minor machine maintenance (i.e. greasing, oiling, etc.) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Qualifications Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.). Must be able to read and understand blueprints, specifications and routings Ability to operate, adjust offsets; setup experience preferred, but not necessary Ability to edit programs, fanuc controls, G code and M code programming Requires mathematical skills that require the ability to add, subtract, multiply, and divide. Must perform metric conversions. Requires good oral and written communication skills in order to interact with employees. Ability to true in jaws Possess a good mechanical aptitude and/or prior machinist experience a plus Preferred Skills and Experience Ability to work in a fast-paced environment. Ability to communicate with all levels of the organization. Ability to multi-task, establish priorities, set aggressive goals and achieve them. Must be open to work overtime, as necessary. 2 axis or 4 axis/live tooling Ability to adjust taper on the OD/ID/face Experience with tail stock and steady rests Able to check pin size over threads Knowledge of bore gages Able to add extra passes to OD/bore/face if necessary Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases occasionally, regularly, and frequently correspond to the following definitions: Occasionally means up to 1/3 of working time, regularly means between 1/3 and 2/3 of working time, and frequently means 2/3 and more working time). While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time 2nd Shift - 2:30 pm - 11:00 pm Monday through Friday PI1bc9d2625bfd-31181-38188040

Job DescriptionPosition: Coiling Engineering Technician Hourly Rate: $35hr - $45hr (Dependent on experience) Hours/Shift: 8am - 5pm Mon-FriHire Type: Direct Hire, hourly with full benefits Benefits: Medical, Dental, Health, Vision, 401k match, STD and LTD, Tuition Reimbursement Responsibilities: Operate and program CNC coiling and winding machinery Set up and maintain equipment for optimal performance Ensure quality control and precision in manufacturing processes Troubleshoot and resolve technical issues Monitor production efficiency and output Follow clean room protocols and safety procedures Train and mentor other team members as needed Maintain detailed documentation of processes and procedures Contribute to continuous improvement initiatives Collaborate with engineering and quality control teams Requirements: Minimally 4+ years experience working with CNC Spring Coiling machinery Mut have experience fixing and maintaining the machines Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Principal Accountabilities: As a key member of our manufacturing team, you will: • Log time and job data using ERP software • Interpret work orders, flow sheets, and part drawings to understand job requirements • Inspect blueprint dimensions using manual gauges • Load and verify tools and fixtures; fabricate basic fixtures when needed • Pull and verify correct materials from staging area per WOPAC • Set up and operate 3-axis mills and basic 2-axis lathe work • Upload/download CNC programs from programmer to machine • Align vices and locate fixture centers accurately • Submit first article and final inspections to Quality Assurance • Run production parts and conduct in-process inspections • Maintain a clean, organized workspace following 5S principles • Perform daily and monthly machine preventive maintenance • Communicate with Supervisor to ensure successful job completion • Support all safety and quality system requirements • Take on additional duties as assigned • This is a safety-sensitive position Knowledge / Skills / Experience We're looking for a skilled professional who brings precision and pride to their craft: • High School Diploma or equivalent. • Basic proficiency with ERP software. • Minimum 5 years of experience in: • CNC machining • Blueprint reading • Manual inspection gauges • Editing and writing CNC programs • Strong basic math skills; trigonometry knowledge preferred. • Ability to stand for extended periods. The salary range for this position is $28-$36. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting. • Competitive Benefits • Benefits begin on DAY 1! • Employee Assistance Programs • Curated Self-Paced Learning & Development Programs for all Employees All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status Mitsubishi Chemical Advanced Materials Inc. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please email [email protected]. We will make a determination on your request for reasonable accommodation on a case-by-case basis. The law requires Mitsubishi Chemical Advanced Materials Inc. to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights Mitsubishi Chemical Advanced Materials Inc. will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay. Please see the Pay Transparency Nondiscrimination Provision for more information As a Federal Contractor, Mitsubishi Chemical Advanced Materials Inc. is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify.

Shift 1 (United States of America) As a Machinist at Coperion in Whitewater, Wisconsin, you will support production activities by setting up, adjusting, and operating a variety of machine tools, including mills, drills, saws, lathes, CNC, and other equipment necessary to produce precision metal parts. Your role is to ensure parts are manufactured to exact specifications, maintaining high quality and efficiency standards. You will work within established procedures, collaborate on more complex tasks when needed, and contribute to the overall productivity of our manufacturing team. What You'll Do: CNC machine parts to specifications using machine tools such as lathes, milling machines, saws, or grinders. Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments. Set up, adjust, and operate all basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations. Support the activities of operations by setting up, adjusting, and operating a variety of machines. Support continuous improvement initiatives to enhance productivity and quality. Perform routine maintenance and troubleshooting on equipment to minimize downtime. Support the overall manufacturing process as needed. Team: You will be part of Coperion's manufacturing team, working alongside other skilled machinists, technicians, and production personnel. Your contributions will help ensure that production runs smoothly, quality standards are met, and continuous improvement is achieved in support of Coperion's commitment to excellence. Required Education/Experience: High School diploma or equivalent. 5-7 years' progressive experience operating drills, lathes, milling machines, and CNC equipment. Ability to read BOMs and work according to blueprints and technical drawings. Experienced with the use of hand tools, power tools, and basic fabrication equipment. Strong understanding of precision measurement tools and techniques. Ability to work independently and collaboratively. Preferred Qualifications: A 2-year trade certificate in machining is a plus. Knowledge of safety standards and best practices in a manufacturing environment is mandatory. Experience with hydraulic, pneumatic, and mechanical systems. Welding certifications (MIG, ARC, gas welding) are highly desirable. Prior experience working with extruder gearboxes, industrial machinery, or refurbishment projects. Ability to operate forklifts and other warehouse equipment safely. #LI-EP2 #LI-ONSITE #IND123 Who we are: Coperion is an industry leader in compounding and extrusion, feeding and weighing, bulk material handling and service, bringing a wealth of know-how and experience to the market. Customers benefit from Coperion's divisions of Polymer, Equipment & Systems, and Service that are optimally networked on a global basis to offer ultimate support in the design, manufacturing and implementation of ideal systems. Staffed by engineers, chemists, technicians and a variety of industry experts, these Divisions form a powerhouse of process solutions for their customers. Coperion is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose - Shape What Matters For Tomorrow™ - we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: ******************** EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

Contract Shift: Monday-Thursday, 3:00 PM - 1:30 AM (4x10s) Job Type: Full-Time Pay Rate: $22.00-$32.00/hr + $1.00 shift differential We are hiring a dependable and motivated CNC and Machining Lead to join our client's team. This role offers long-term growth potential and consistent weekly hours. Key Responsibilities • Operate both vertical and horizontal lathes and mills • Oversee second shift machining operations for 4-6 team members • Perform setup for 5-7 low volume, high mix jobs daily (30 min avg per setup) • Perform manual drilling, tapping, and general machining support • Monitor long-running jobs and stage upcoming setups as needed • Work primarily with 1/4” thick carbon and cold-rolled steel • Maintain quality standards per ISO 9001:2015 and specified tolerances (±.01 to ±.039) Machinery / Equipment Used • Manual and CNC Lathes • Manual and CNC Mills • Calipers (millimeters), CMM instruments (a plus) Required Qualifications • Prior exposure to manual and CNC machining environments • Comfortable supervising small teams (4-6) • Able to perform frequent setups with high attention to detail • Must not have experience limited to 5-Axis, medical, or aerospace sectors • Willingness to train and work with various materials and setups • Able to lift and stand for extended periods as needed Client Hire-On Benefits • Benefits start Day 1 • $1.00/hr shift differential • 401(k) match (newly launched) Pre-Employment Process • Drug Testing • Background Check • Employment Verification & References • E-Verify Additional Details • Equal Opportunity Employer: All applicants are considered regardless of race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status, in compliance with federal and Illinois EEO laws. • Reasonable accommodations are available for individuals with disabilities. • No fees are ever charged to applicants for applying, interviewing, or placement through Assist Staffing. • Complies with the Illinois Equal Pay Act - pay is based on skills, experience, and job requirements only. • Follows the Chicago Ban the Box ordinance - background checks occur only after a conditional offer. • Assist Staffing does not request prior wage history, in compliance with Illinois law. • Applicants must be legally authorized to work in the U.S.

Reich Tool & Design CNC Machinist in the Tool & Die Department 1st shift: $30-$35 per hour Reich Tool & Design, a Menomonee Falls based, family-owned and operated Tool and Die manufacturer for almost 60 years is looking for an experienced CNC Machinist to work its Tool & Die Department. The qualified candidate would report to the Tool & Die Cell Lead. Reich Tool offers a clean, climate controlled state-of-the-art facility. This is an 8-hour, in-person, first shift position Monday - Friday with possible overtime based on Company needs. Expected hours are 40 per week. Responsibilities include, but are not limited to the CNC Machinist in the Tool & Die Department: Ability to program, setup and run all CNC machines within the tool & die department. Perform drilling, tapping, reaming, milling, boring and other operations over a wide range of surfaces, depths and diameters in a variety of different materials. Includes a requirement to plan the work, determine cutting sequences, develop holding and chucking fixtures, adjust feeds and speeds and cut depths and select appropriate cutting tools using the print part, sketches or verbal description of the part to be made. Read and interpret engineering drawings and blueprints. Make all necessary fine adjustments to machine tool for critical work. Skilled use with a wide variety of precision instruments for metrology. Use of a variety of precision measuring devices to position part, check dimensions during machining and check final part for accuracy. Assume responsibility for dimensional accuracy and quality workmanship. Proceed on work assignments with minimum supervision. Update and complete all required paperwork and documentation. Must have developed proficiency in the operation of various machines. Comply with all quality, safety and sanitation regulations. Recognize, report, and correct errors. Support the company's quality policy, ISO 9001, ISO 13485, 5S practices, LEAN and world class manufacturing initiatives. Commit to the corporate goals, mission, and vision. Ability to adjust working schedule to changing workloads in the shop including the ability to work overtime when requested. Effectively work with Toolmakers. Assist in development and implementation of procedures and controls to promote efficient lean operations of the organization and ensure the groups follow those procedures and controls. Ability to multi-task a few jobs. Regular physical attendance is required. Travel, as required. Other duties as instructed by project manager(s). Minimum Requirements/Qualifications Necessary for the CNC Machinist in the Tool & Die Department: High school education or GED. Communication skills. Basic knowledge of Computers, CAD/CAM, Windows. Proficient with math and blueprints. Knowledge of metallurgy, GD & T, and metrology. Prior manufacturing experience in job shop environment. Preferred Requirements/Qualifications for the CNC Machinist in the Tool & Die Department: Prior experience working with automotive, aerospace and medical industries. Prior machining experience in a Tool & Die manufacturing environment. Independent thinker to make creative parts/vices to make job easier, faster and precise. Journeyman's card in CNC and/or tool making. 5 years+ machining experience Post offer drug screen and background check required. Job Type: Full-time Pay: $25.00 - $28.00 per hour Benefits: 401(k) 401(k) matching Health, Dental, Vision and Life insurance Flexible spending account Health savings account Paid time off Professional development assistance Referral program Tuition reimbursement Employee assistance program Equal Opportunity Employer All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity, age, equal pay, physical or mental disability, genetic information, veteran status, and parental status. We Make it Easy Founded in 1901, MRA is a nonprofit employer association that serves more than 4,000 employers, covering more than one million employees. As one of the largest employer associations in the nation, MRA helps its member organizations thrive by offering the most comprehensive assortment of HR services, information, education, and resources to help build successful workplaces and a powerful workforce. We partner with these companies working directly with their HR department and leadership to hire their talent. We are a direct line to the company, not an agency recruiter.

CNC Machinist - 1st Shift (5:00 AM - 3:30 PM, Monday-Thursday) 💲 Pay: $20-$32/hour (based on experience) ✨ Full Benefits Package Do you take pride in precision, problem-solving, and creating high-quality parts? We're looking for a skilled CNC Machinist to join our 1st shift team. This role is ideal for someone who thrives in a hands-on environment, enjoys tackling challenges, and wants to work with advanced technology like Haas Mills & Lathes. Bilingual (English/Spanish) is preferred. Ludlow uses E-Verify to confirm work eligibility in the U.S. What You'll Do Set up CNC machines quickly, accurately, and efficiently Program, edit, and troubleshoot using G & M code Collaborate with engineering and CAM teams to improve CNC programs Design and assist in creating custom fixturing for complex parts Run production parts while maintaining tight quality standards Suggest technical improvements to boost production efficiency Monitor performance issues and provide solutions What We're Looking For Required: High school diploma or GED (post-secondary CNC training preferred) 8+ years CNC machining experience Fluency in G & M code and ability to edit programs Strong blueprint reading skills Problem-solving mindset with high attention to detail Positive attitude in a fast-paced, customer-focused environment Willingness to learn and collaborate with engineering/programming teams Preferred: Metal fabrication background CAD/CAM experience Familiarity with Haas controls Why Join Us? We offer competitive pay ($20-$32/hour) based on experience and a comprehensive benefits package: Medical, dental, and vision insurance Company-matched IRA Life, short- and long-term disability insurance MetLaw & LifeLock services Critical illness, accident, and hospital indemnity insurance Employee Assistance Program (EAP) PTO, holiday pay & floating holidays

Essential Responsibilities: The following essential functions represent the primary work performed; however, other responsibilities could be expected that not detailed here but fall within the scope of this role. Properly and safely load and unload raw materials in CNC machinery; respond to machine malfunctions, and abide by ISO requirements and safety operating procedures Maintain part specifications by turning, facing, drilling, boring, grooving, threading and milling machine operations; display proficiencies taking measurements; adjust and replace worn tools; adhere to internal quality assurance procedures and processes. Must be able to use precision gages and instruments, read inspection documents, record irregularity findings and make decisions for part quality, and perform unassisted tool wear offsets on machine tools, such as drills, taps and inserts Use hand tools for deburring as required. Skills, Abilities and Requirements Ability to do repetitive work and coordinate work load in multiple machine CNC cells. Perform regular equipment cleaning and light maintenance tasks for lubricants and coolant. Recognize, deploy and properly use work holding, precision tooling and inserts. Understand and have the ability to make machine adjustments; perform own tool wear offsets. Interpret quality requirements and use gauges to meet tolerance requirements. Participate in and contribute to continuous improvement culture including lean initiatives. QUALIFICATIONS AND EXPERIENCE: Pass required Company prescreening assessments. Possess good problem-solving skills and ability to read required gages and tools. Prior CNC machining background; CNC machinist technical school course work or CNC Boot Camp certificate and/or mechanical experience desirable. Lift up to 40 pounds without assistance, reaching, bending and standing for long periods of time is also required. Previous experience with Fanuc or Mazak controls, "G" & "M" code knowledge an added plus. Flexibility and availability for overtime hours as required due to production demands. The production warehouse will work with and around a variety of industrial warehouse equipment and vehicles, such as forklifts and robotic arms, in an environment that includes exposure to loud noise levels, vibration, chemicals, dust, fumes, mechanical hazards, bright lights and hot or cold temperatures. While performing the duties of this position, incumbents are required to do all of some of the following, with or without accommodations.

Advanced CNC Machinist - 3rd Shift (Multi-Machine Expertise) Shift: 3rd Shift, 10-hour shifts (typically 9:00 PM - 7:30 AM), 4-5 days/week Employment Type: Full-time, Permanent W-2 Authorization: U.S. Citizen or Green Card holder required Pay: Up to $45/hour + Full benefits Why You'll Thrive Join a premier provider of high-precision injection mold tooling where innovation meets stability. Our cutting-edge technology, flexible scheduling, and supportive culture-where many stay for decades-ensure you'll build a lasting career with room to grow and afternoons to enjoy life outside work. What You'll Do Blueprint & CAD Interpretation: Read 3D models, blueprints, and technical drawings to determine tooling and setup requirements. Production Preparation: Monitor schedules, prepare tools/programs, and organize fixtures for upcoming jobs. CAM Programming & Setup: Create offline CNC programs using CAM software and configure machining centers with the correct tooling and offsets. Machine Operation & Adjustment: Run CNC mills, lathes, and manual equipment; set cutting depth, feed, and speed; maintain part quality. Quality Control & Troubleshooting: Inspect machined parts, perform tool changes, and diagnose/adjust machines to meet tight tolerances. Requirements What You Bring Hands-On Experience: 3+ years operating CNC machines, manual mills, and lathes-or completion of a Registered Apprenticeship program. Educational Foundation: A.S. in Machining or related field is a plus; equivalent technical experience accepted. Technical Proficiency: CAM software familiarity and strong mechanical aptitude for setup and troubleshooting. Dependability: Solid work history with a commitment to quality and attendance. Local Commitment: Residence within commuting distance to Slinger, WI. Benefits Ready for a challenging and rewarding role on our 3rd shift team? Apply now and become an integral part of our precision machining family!

CNC Machinist / Programmer - 2nd & 3rd Shift Pay: $27-$30 per hour Shifts: 2nd & 3rd Shift Employment Type: Full-Time Position Overview:We are seeking a highly skilled CNC Machinist/Programmer with 5-7 years of experience to join our team. This individual will be responsible for programming, setting up, and operating CNC machines to produce high-precision parts. The ideal candidate will be proficient in G & M code, capable of performing complex machining operations, and comfortable working independently in a fast-paced manufacturing environment. Key Responsibilities Design and develop accurate CNC programs efficiently and on schedule. Set up, check, and operate CNC machine tools to perform complex machining operations. Run both new and repeat jobs with consistency, speed, and accuracy. Interpret and understand program formats, fixturing setups, and machining sequences. Arrange, mount, and secure workpieces-including the ability to fixture parts when no fixtures exist. Set machine stops and calibrate fixtures to the correct reference points. Install CNC programs into machine consoles and verify proper alignment. Manually cycle machines to verify tooling, speeds, feeds, clearances, and part positioning before production. Adjust machine parameters to correct deviations from program specifications. Recognize, report, and correct machining errors as they arise. Recommend tooling, sequences, and improvements for new or complex machining requirements. Train and mentor junior machine operators as needed. Troubleshoot operational difficulties and perform necessary adjustments to ensure smooth machining. Work from detailed blueprints, specifications, and engineering drawings. Requirements 5-7 years of machinist experience in a CNC environment. Strong mathematical abilities including geometry, algebra, trigonometry, and metric conversions. Completion of an accredited apprenticeship or equivalent technical training. Extensive knowledge of machine shop practices and CNC programming techniques. Ability to read and interpret blueprints, specifications, and routings. G & M code proficiency required. Experience with conversational controls is a plus. Ability to calculate feeds, speeds, and machining parameters independently. Solid understanding of GD&T (Geometric Dimensioning & Tolerancing). Strong troubleshooting skills and the ability to work with minimal supervision.

Precision Resource seeks a CNC MACHINIST to join our well-established Vernon Hills, Illinois manufacturing division. We're approximately 30 miles north of Chicago and 30 miles south of Kenosha Wisconsin. We're a small-medium sized division of our solid, privately held, global company that innovates and manufactures a high volume of metal parts for automotive, aerospace, hardware and other industries. Our proven quality and safety are driven through our ISO 14001, QMS and IATF registered processes. You'll Have 1 st shift 4-day work week, Mon-Thur, plus some overtime availability. Generous PTO supporting our work-life balance culture. Opportunity to learn multiple areas of our Toolroom, and tuition reimbursement. Good compensation package, including many benefits and 401k match with full vesting. Annual bonus potential. Collaborative culture with a skilled team of toolroom machinists, production machine operators, engineers, and knowledgeable managers. Approachable, positive leaders across all departments. Smaller company culture with the best features of being a part of a larger global company in technical industries. Essential Duties Set-up and operate CNC Machining Centers as part of the Toolroom team that supports machining requirements for production tooling, quality control gauges and parts that require CNC machining. Programming ideal. Shape metal parts to specifications in tooling prints using drawings, existing programs and verbal instructions. Using schedules and verbal instruction, identify tooling components to be made, standard fixtures to be used, machine settings, number of parts to be machined, and programs to be used. Move controls to align parts, load job specific program into machine, and adjust machine settings. Observe and verify machine settings, part orientation, and proper program through dry run. Inspect work visually and with measuring instruments using designs, sketches, and verbal instruction. Perform applicable machine repair and maintenance. Accurately document and maintain records in ERP system. Provide backup support for other toolroom machines when needed. Participate in continual improvement teams and activities as required. Comply with all safety requirements including but not limited to keeping a clean and orderly work area. Regular and punctual work attendance as scheduled. Qualifications High School diploma or equivalent, plus 2 years of CNC Machining experience or comparable technical school CNC Machining education. Experience with set-up and operation of CNC machining, ideally milling precision tooling components ideal. CNC programming experience ideal, or capability of efficiently learning with strong computer aptitude. Must be able to read and interpret drawings and specifications. Experience with various close tolerance inspection tools and equipment. Knowledge of English & Metric measurement systems. Ideally, interest and ability in learning to run other Toolroom machines including manual machines, lathe, mill, surface grinder, drill press, Wire EDM. Must be able to manage multiple priorities and easily adapt to changing situations. Self-motivated with a desire to learn and continuously improve performance. Very reliable and punctual attendance. Apply self-motivation to achieve excellent productivity starting at $23-$29 hourly with annual pay increases and bonus potential. Precision Resource is an equal opportunity employer, D/V.

We have 4 positions open. Please click on the link for the job description. CNC Machinist - HMC/VMC - 1st shift CNC Machinist - HMC/VMC - 2nd Shift CNC Machinist - Lathe - 2nd Shift Join a Company Where You're More Than Just a Number - Become Part of the Carlson Team! Carlson Tool & Manufacturing is growing, and we're looking for a skilled 2nd Shift 5-Axis Machinist who wants more than just a job - they want a role that values precision, rewards performance, and offers career growth. Why Carlson? Based in Cedarburg, WI, we're a family-owned company with an over 65-year tradition of investing in our people and our technology. Our culture is built on teamwork, integrity, and continuous improvement - where every team member takes pride in their work and contributes to building diverse solutions for a variety of industries. What You'll Do: In this role, you'll support the manufacturing of high-quality parts including engine components, mold tooling, complex mechanisms, enclosures and more that serve industries like Automotive, Medical, Plastic Packaging, Battery, and beyond! You'll work in a clean, climate-controlled, well-equipped facility where your skill and attention to detail make a real impact. If you're someone who takes ownership, likes solving problems, and enjoys a quieter, more focused second shift - you'll feel right at home here. Why Second Shift? Great for night owls or those balancing life during the day Less traffic, quieter floors, focused work Higher pay and more flexibility Paid mealtime included What You'll Get: Weekly pay: Starting at $34 - $40/hr depending on experience + 10% shift premium and paid mealtime $2,500 Signing Bonus for qualified candidates Relocation Assistance for qualified candidates Full Health Care Coverage including Dental & Vision Health Savings Account (HSA) with employer contributions Life and AD&D Insurance PTO & Paid Holidays Gainsharing Bonus Program Self-Directed 401(k) with 3% Company Match Referral Bonuses Company-provided PPE including prescription safety glasses & safety-toe shoe reimbursement Company-provided inspection equipment Family-Owned Environment with Company lunches, Milestone recognitions, Cookouts and Holiday Parties And did we mention perks like our on-site Carlson Recreational Center? Think weightlifting, cardio, a golf simulator, pickleball court, and more - open to employees and their families. What You'll Bring to the Table: Proficiency in operating 5 Axis Machining Centers - required Strong programming skills - required Ability to read and interpret part prints and technical drawings Proficient in calculating dimensions and tolerances using mathematical skills and precision measuring tools such as micrometers and calipers Capable of machining precision parts from start to finish A Day in the Life: Set up, program, and operate 5-Axis Machining Centers Review part specification and requirements. Setup work piece, create machining center sequence and tool selection. Produce parts within required tolerances and specifications. Inspect and validate your own work using precision measuring equipment Complete short-run jobs with frequent changeovers and tool adjustments Keep work areas clean, safe, and organized

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. We are seeking a CNC Machinist (Set Up Relief Operator) at our Cudahy, WI facility to work the weekend night shift Friday, Saturday and Sunday, 6pm-6am, with training held on 1st shift for 60-90 days, Monday-Friday, 7am-3pm. Following training you will work 36 hours but will be paid for 40. This position is responsible for all complete setups of CNC machines and running them on a relief basis. Position responsibilities include: Follows engineering setup charts to perform initial assembly of tools Performs complete disassembly of jobs Arranges tooling Interprets program to install all tools in the machine and establish and put in offsets Performs complete machining of first piece Verifies all dimensions on machines to corresponds with drawing Running machines in a relief basis Requirements: High school diploma or equivalency required Ability to read blueprints 5-7 years of CNC experience Machining certificate preferred If you are organized, motivated and can work independently and as a part of a dynamic team, please contact us. We offer an excellent salary commensurate with experience, a comprehensive benefits package, and relocation if necessary. ATI Metals and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability status, or any other status protected by federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. We are seeking a CNC Machinist (Set Up Relief Operator) at our Cudahy, WI facility to work the weekend night shift Friday, Saturday and Sunday, 6pm-6am, with training held on 1st shift for 60-90 days, Monday-Friday, 7am-3pm. Following training you will work 36 hours but will be paid for 40. This position is responsible for all complete setups of CNC machines and running them on a relief basis. Position responsibilities include: Follows engineering setup charts to perform initial assembly of tools Performs complete disassembly of jobs Arranges tooling Interprets program to install all tools in the machine and establish and put in offsets Performs complete machining of first piece Verifies all dimensions on machines to corresponds with drawing Running machines in a relief basis Requirements: High school diploma or equivalency required Ability to read blueprints 5-7 years of CNC experience Machining certificate preferred If you are organized, motivated and can work independently and as a part of a dynamic team, please contact us. We offer an excellent salary commensurate with experience, a comprehensive benefits package, and relocation if necessary. ATI Metals and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability status, or any other status protected by federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

Position 1A Machine Operator Reports To Manufacturing Leader Location/Business Cudahy, WI / Milwaukee Cylinder Status Hourly Date 08/07/2019 Summary This position requires the set up and operation of one or more manual and/or numerically controlled vertical and turning machining centers. You will use your expert knowledge to set up and operate machines that are capable of forming, polishing, bending, and cutting raw metal into finished parts. The work is performed in a cellular production environment requiring machinists to run one or more machines ESSENTIAL DUTIES AND RESPONSIBILITIES: Run production parts in an efficient manner to achieve targets set by management. Correctly use precision measuring equipment and gauges in order to produce quality parts within approved tolerances. Find and use programs and other electronic documents, including making minor edits to CNC programs (such as speeds, feeds, offsets, x and z movements, etc.). Remove burrs on components created during machining. Work with engineers to improve processes, tooling and programs (as directed by management). Correctly use all appropriate Personal Protective Equipment and follow company safety policy. Participate in SQDC (safety, quality, delivery, and cost) meetings. Perform material handling and inventory control for product in designated area. Provide training and instruction to other employees (as directed by management). Maintain manual and electronic records. Conduct TPM (total preventative maintenance). Perform floor maintenance, general housekeeping, chip removal, and the disposal of garbage Qualified candidates must know how to use the following information and equipment: Data terminals and personal computers. Handbooks, charts, manuals, specification sheets, operation sheets, setup sheets. Measuring (quality) equipment including but not limited to gauges, calipers, micrometers, scales, indicators and other items necessary to complete the manufacturing of parts. Manual and power hand tools. Stand-up and sit-down fork lifts. Q UALIFICATIONS Able to read blueprints, including knowledge of geometric dimensioning and tolerancing (GD&T) system. Knowledge of G&M program codes. Math skills (equations, formulas, fractions, etc.). Some knowledge of PC's or other types of electronic equipment that may be needed for timekeeping, labor time collection, job tracking or any other types of automatic data collection. Good eye-hand coordination, attention to detail, and communication skills. Team player, responsible and result oriented. Ability to walk/climb to a variety of work locations, sit and stand for extended periods of time. Ability to perform repetitive motions. Ability to follow precise instructions. Ability to lift work materials up to 50 lbs. in weight.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. We are seeking a CNC Machinist (Set Up Relief Operator) at our Cudahy, WI facility to work the weekend night shift Friday, Saturday and Sunday, 6pm-6am, with training held on 1st shift for 60-90 days, Monday-Friday, 7am-3pm. Following training you will work 36 hours but will be paid for 40. This position is responsible for all complete setups of CNC machines and running them on a relief basis. Position responsibilities include: Follows engineering setup charts to perform initial assembly of tools Performs complete disassembly of jobs Arranges tooling Interprets program to install all tools in the machine and establish and put in offsets Performs complete machining of first piece Verifies all dimensions on machines to corresponds with drawing Running machines in a relief basis Requirements: High school diploma or equivalency required Ability to read blueprints 5-7 years of CNC experience Machining certificate preferred If you are organized, motivated and can work independently and as a part of a dynamic team, please contact us. We offer an excellent salary commensurate with experience, a comprehensive benefits package, and relocation if necessary. ATI Metals and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability status, or any other status protected by federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested. Requirements Basic Qualifications High school diploma or GED At least 5 years of previous CNC operation experience. Preferred Qualifications (in addition to Basic Qualifications) Experience as a CNC Vertical Turning Center Operator/Machinist Experience with metal forgings Machining Certification. Skills Excellent oral and written communication skills with the ability to work effectively as part of a team and independently to achieve goals and objectives Strong knowledge of basic machining principles, GD&T and ability to read blueprints Excellent analytical skills with the ability to use hand tools, measuring instruments and gauges to ensure proper setups and machining operations Excellent organizational skills with strong attention to detail. We thrive when the expectations are great, and the barriers are high. We're solving the world's most difficult challenges through materials science. Our advanced, integrated process technologies and proven performers give us a tremendous competitive advantage. When customers' systems need to fly higher, dig deeper, stand stronger, and last longer -- anywhere on, above or below the earth -- ATI is proven to perform. *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

Scope / Function: · The CNC/NC Machine Operator A is responsible for the manufacture of parts per plant specifications in an accurate and timely manner utilizing manual and CNC machine centers. Job Elements: · Consistently able to design and develop accurate programs in a timely manner. · Reliably able to run both new and repetitive jobs efficiently. · Set-up, check programs and operates numerically controlled machine tools and/or CNC machining equipment to perform a complex series of progressive machining operations to meet precise tolerance and finish requirements. Requires the ability to operate multiple machines simultaneously · Understands program format and fixturing. Able to arrange, mount and secure work piece in absence of fixturing. · Set stops; calibrates fixturing to appropriate reference points. Installs programs and/or cards in consoles reader and correlates machine position with controls. Manually cycles machine through an operation sequence to check fixture and work positions, tooling, clearances, speeds, feeds, etc. Adjusts machine or console to correct deviations from program specifications. · Recognizes reports and corrects errors. Recommends tooling and operational sequence to assist in developing practical programming for new and unusual machining requirements. May set-up for and instruct machine operators of lower classification. Able to troubleshoot and diagnose operating difficulties and make adjustments. Works form detailed and involved part drawings and specifications. Uses a variety of precise measuring instruments. Requirements R Requires 5-7 years of machinist experience. · Requires mathematical skills that require the ability to add, subtract, multiply, divide and perform geometric, algebraic and trigonometric calculations. · Requires accredited apprenticeship or equivalent training together with considerable experience in machine shop practices and techniques plus additional training to acquire a working knowledge of programming numerically controlled machine tools or CNC machining equipment and operations. · Must be able to perform metric conversions · Requires good oral and written communication skills in order to interact and cross-train with employees · Must be able to read and understand blueprints, specifications and routings. · Requires G&M code experience. Experience on conversational controls a plus. · Must be able to calculate own feeds and speeds. · Must be able to show good understanding of geometric tolerancing · All other duties as assigned BenefitsHealth Dental 401K Holiday PTO

This position will be responsible for setting up and operating a variety of numerically controlled machines. ESSENTIAL DUTIES and RESPONSIBILITIES: Set up, adjust and operate vertical CNC, Horizontal Lathes, and Manual Machining Centers Operate Fanuc, Siemens, and Okuma controlled machines Maintain required tooling and fixtures Establish indexing sequences, speeds and feeds, if different than program Edit program or make modifications for CNC operations in absence of programmer Supply information to correct, update, initiate setup sheets, tooling sheets and programs Work with programmers on process and programs prove out Recognize operating irregularities, make necessary adjustments Plan and determine setup procedures and operating sequences on various machines, i.e., mills, lathes, drills, etc. Select tooling, attachments, spindle speeds, tool feed rates, workpiece securing methods, supports, etc. which are best suited for the operation, machine and size of workpiece; in conjunction with routing sheets, work instructions Check work to assure dimensional conformance to specifications Work from complex and involved drawings and specifications Use a variety of precision instruments and devices to setup, check and perform work Instruct or train other operators as requested Diagnose and rectify tooling and/or machining difficulties with minimum assistance Recommend method changes to improve efficiency and reduce costs Assists in keeping facility and equipment clean, neat, safe and operating efficiently Comply with all established policy and safety guidelines in a drug-free workplace MINIMUM EDUCATION & QUALIFICATIONS: High School Diploma or equivalent 2 or more years of related experience Certificate or diploma in CNC machining is preferred ADDITIONAL KNOWLEDGE, SKILLS & ABILITIES: Demonstrated ability to read basic blueprints and follow specific instructions and procedures Ability to organize, prioritize and plan daily work assignments in a self-directed changing environment Mathematical skills that require the ability to add, subtract, multiply, divide and perform geometric, algebraic and trigonometric calculations Must be able to perform metric conversions Ability to use measuring equipment such as height gauges or verniers Understanding of metal-cutting applications and machine practices Strong attention to detail required PROTECTIVE CLOTHING/EQUIPMENT: Steel-toe shoes Eye protection WORKING ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed in a loud machinery environment. The noise level in the work environment is usually loud. Messer Cutting Systems is an equal opportunity employer and is committed to providing a workplace free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual qualifications without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.

Northern Gear & Machining is seeking experienced CNC Operator/Machinist 2nd Shift to collaborate with a team dedicated to the success of our customers. There is a $2 shift premium for 2nd shift. We will train on second if needed. Responsibilities: Operating Vertical and Horizontal CNC Mills OR Lathes, Gear Hobs Working with Engineering & other Team Members Working from a blueprint or drawing with specifications Using a variety of precision measuring devices Adhering to Quality Assurance requirements including first piece inspections and recording of measurement data Maintaining a clean and safe work environment Familiar and ISO standards and follow all standards and procedures Striving for continuous improvement Be able to work in a cell structure operating 2-3 machines at a time Qualifications: Be able to work in a fast-paced environment Able to effectively communicate with all levels of the organization A positive attitude Achieve, maintain, and establish productivity and quality requirements Zero defect quality mentality 2+ years of CNC machining experience preferred Pay based on experience. APPLY TODAY!! Work Remotely No Northern Gear and Machining is a full-service machining company based in Southeastern Wisconsin that produces precision machined parts, geared components, and related assemblies. For over 70 years, Northern Gear and Machining has been able to provide their customers outstanding service with quality products, cutting edge-technology, and on-time delivery. Job Type: Full-time Salary: $18.00 - $24.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Health savings account Paid time off Referral program Vision insurance Schedule: 8-hour shift Monday to Friday Night shift Ability to commute/relocate: Muskego, WI 53150: Reliably commute or planning to relocate before starting work (Required) Experience: Manufacturing: 2 years (Preferred) Shift availability: Night Shift Work Location: One location About Northern Gear, LLC: Northern Gear & Machining is a full-service machining company based in Southeastern Wisconsin that produces precision machined parts, geared components, and related assemblies using lathes, mills, hobs, shapers, broaches, and grinders. For over 70 years, Northern Gear & Machining has been able to provide their customers outstanding service with quality products, cutting edge-technology, and on-time delivery.