Computer numerical controller machinist jobs in Gilbert, AZ - 112 jobs

National Pump Company, a global leader in engineered pump solutions for municipal, industrial, and agricultural markets, is seeking an experienced Manual Machinist to join our Glendale, AZ team. The Manual Machinist is responsible for setting up and operating manual machining equipment to manufacture, repair, and modify pump components to precise specifications. This role requires strong knowledge of machining practices, blueprint interpretation, and precision measurement, with a focus on quality, safety, and productivity in a pump manufacturing environment. Manual Machining Operations Set up and operate manual lathes, mills, drill presses, grinders, and related equipment Machine pump components such as shafts, impellers, casings, wear rings, and bearing housings Perform turning, boring, milling, drilling, tapping, facing, and threading operations Maintain required tolerances and surface finishes per specifications Select appropriate cutting tools, speeds, and feeds based on material and job requirements Perform routine maintenance and cleaning of manual machining equipment Inspect machines for wear or malfunction and report issues as needed Properly handle, store, and maintain cutting tools, fixtures, and gauges Blueprint and Specification Interpretation Read and interpret engineering drawings, blueprints, routings, and work instructions Understand geometric dimensioning and tolerancing (GD&T) as applicable Verify dimensions, materials, and machining requirements prior to production Clarify discrepancies or unclear instructions with engineering or supervision Inspection and Quality Control Measure parts using micrometers, calipers, indicators, bore gauges, and other precision instruments Perform in-process and final inspections to ensure conformance to specifications Document inspection results as required Identify and correct machining errors or quality issues promptly Safety and Compliance Follow all safety procedures, including lockout/tagout and PPE requirements Maintain a clean and organized work area in accordance with 5S principles Comply with company policies, quality standards, and regulatory requirements Actively participate in safety meetings and continuous improvement initiatives Collaboration and Production Support Work closely with supervisors, engineers, and other machinists to meet production schedules Assist with troubleshooting machining or process issues Support cross-training and knowledge sharing within the machine shop Participate in continuous improvement and efficiency efforts Qualifications High school diploma or equivalent Minimum 2 years of experience as a manual machinist (pump or heavy industrial manufacturing preferred) Proficiency with manual lathes and mills Strong understanding of machining principles and tolerances Ability to read blueprints and use precision measuring tools Physical Demands Frequently stand, walk, bend, and reach throughout the work shift Lift and move materials between 70 and 100 lbs with or without assistance Manual dexterity and visual acuity required for precision work Exposure to noise, metal chips, cutting fluids, and industrial environments Work Environment Manufacturing shop environment Use of industrial machinery and tools Required use of personal protective equipment What We Offer Competitive salary and performance-based profit sharing Comprehensive benefits package including medical, dental, vision, 401(k), Age and Service, Stock Purchase, etc. Opportunities for professional growth within a respected, long-standing organization A collaborative culture focused on safety, quality, and continuous improvement About National Pump Company National Pump Company designs and manufactures high-quality pumping solutions used worldwide in critical infrastructure applications. With a history spanning more than 50 years, we are committed to innovation, reliability, and operational excellence.

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Legacy Talent Search is currently seeking candidates for a CNC Machinist role in Phoenix, AZ. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest-quality manufactured products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their machining and production processes. Key Responsibilities: · Operate and monitor CNC machining centers and lathes to produce precision components. · Set up machines, including tooling installation, fixture positioning, zeroing, and program loading. · Read and interpret blueprints, engineering drawings, and technical specifications to machine parts to exact tolerances. · Perform in-process inspections using calipers, micrometers, gauges, and other precision measurement tools. · Adjust machine offsets, feeds, and speeds as needed to maintain consistent part quality. · Troubleshoot machining issues, tool wear, and minor mechanical problems to minimize downtime. · Follow all safety protocols and maintain organization and cleanliness in machining and production areas. · Collaborate with team members, engineers, and supervisors to meet daily production goals. · Accurately document production data, inspection results, and tooling usage. · Participate in preventative maintenance and routine cleaning of equipment. Qualifications: · High school diploma or equivalent; formal machining or manufacturing training preferred. · 2+ years of CNC machining experience preferred, but strong candidates with less experience may be considered. · Proficiency with CNC mills and/or lathes. · Ability to read and interpret blueprints and use precision measurement tools. · Strong mechanical aptitude, problem-solving skills, and attention to detail. · Excellent teamwork, communication, and collaboration abilities. · Ability to lift up to 50+ lbs and stand for extended periods. · Willingness to work varying shifts as needed. · Knowledge of G-code, tooling, and machining processes is a plus. What We Offer: · Competitive hourly wage of $32-$38 per hour. · Comprehensive benefits package, including health insurance and paid time off. · Opportunities for growth and advancement within the machining and manufacturing fields. · A supportive and inclusive workplace culture. · The chance to contribute to a company that values craftsmanship, innovation, and community. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Job Description PPS is seeking an experienced CNC Router Machinist skilled in set-ups and operation to produce precision parts for our customers in the semiconductor, aerospace, defense, and other industries. This is a full-time, permanent position in a NEW, air conditioned building with a highly competitive pay rate, second-to-none benefits, and room for advancement! Responsibilities: Read and follow traveler instructions Operate 3-axis to 5-axis machine mill Load and unload material and parts Measure and document inspection data Measure, document, maintain or improve on established production standards Read and interpret almost all blueprint dimensions, symbols, and notes Document counts Organize, clean, and maintain work area Complete discrepant tag information Communicate with Engineering on issues, needs, and improvements Perform All Set Ups Other functions as deemed appropriate

Temp Independently setup and operate Mill Turn, Swiss, CNC Mill and CNC Lathes with minimal occasional assistance. Follow supervisor or lead verbal directions. Competent in completing set ups (including 4th axis operations). Able to adjust feed and speed to meet surface finish requirements, adjust tool offsets and/or CDC compensation in order to meet drawing requirements of +/-.0005. Able to inspect first piece article, read and understand programs. Competent in removing worn cutting tools, re-grinding to conform to drawing requirements, and replacing. For internal candidates, a minimum 12 months experience as a Level 5 Operator is required. Key Responsibilities: · Setup and operate multiple machines simultaneously; · Checks parts to maintain quality production; · Trains / Assists other team members on tasks as required; · Performs regular manual tasks; · Insures that output normally equals or exceed that expected; · Keeps quality up to acceptable standards with little discrepant work; · Performs tasks equal to or exceeding established standards; · Working consistently, working overtime and traveling as required; · Conducts himself/herself in a business-like and civil manner; · Ability to react to change productively and perform other essential tasks assigned; · May fill in for area lead as required

Job Description Schedule: Monday - Friday (some weekends/overtime possible) Phone: ************** Website: ************************** We are hiring a CNC Machinist with experience in setup, operation, and editing of CNC mills and/or lathes. The ideal candidate is comfortable working with tight tolerances, large parts, and custom one-off or short-run production. Responsibilities: • Set up and operate CNC mills and/or CNC lathes • Edit or adjust G-code programs at the machine as needed • Read and interpret blueprints, drawings, and job travelers • Select appropriate tooling and fixturing for the job • Perform in-process inspections using micrometers, calipers, and other measuring tools Qualifications: • 3+ years of CNC machining experience required • Strong ability to read blueprints and machine to tight tolerances (+/- .001") • Experience editing G-code at the control • Familiarity with Haas, Fanuc, or similar controls How to Apply: • Apply in person at: 438 W. Watkins Rd, Phoenix, AZ 85003 • Email your resume to: *************************** • Visit us online: **************************

Job Description About Us: Joined Alloys, a division of Leading Edge Manufacturing (LEM), is headquartered in Phoenix, Arizona. LEM has been a trusted name in the aerospace, precision machining, and defense industries since 1959. Originally founded as Maximet, Inc., and later rebranded as Leading Edge Manufacturing in 2017, we specialize in complex manufacturing processes, including machining, sheet metal fabrication, brazing, heat treating, welding, and non-destructive testing. With AS9100D, ISO9001, and NADCAP certifications, we pride ourselves on producing high-quality precision components and sub-assemblies for a range of industries. Are you an experienced CNC Lathe Operator with expertise in large part machining for the aerospace industry? Joined Alloys, a leader in precision alloy solutions, is looking for a talented professional with 5+ years of hands-on experience to join our dynamic team. MUST BE WILLING TO WORK NIGHTS Key Responsibilities Operate and maintain CNC lathes to machine large aerospace components with precision and accuracy. Program, set up, and optimize CNC equipment for large part production, ensuring maximum efficiency. Interpret technical drawings, blueprints, and specifications tailored for complex, large-scale parts. Perform quality checks using advanced measuring tools to ensure compliance with strict aerospace standards. Collaborate with engineering and quality teams to address machining challenges and continuously improve processes. Maintain machinery and adhere to safety and cleanliness protocols. Qualifications 5+ years of experience operating CNC lathes in a manufacturing setting, with significant exposure to large part machining. Strong understanding of GD&T (Geometric Dimensioning and Tolerancing) and CNC programming for complex components. Proven ability to machine high-performance alloys used in aerospace applications. Experience with large-scale production processes, including setup and fixturing for oversized parts. Exceptional attention to detail and quality assurance mindset. Strong communication and teamwork skills, with the ability to work collaboratively. What We Offer: Competitive compensation Comprehensive benefits package, including medical, dental, vision, life insurance, short and long-term disability, and 401K Paid holidays and paid vacation time Opportunities for career growth and professional development A supportive, collaborative work environment focused on teamwork and excellence EEO Statement: Leading Edge Manufacturing LLC, dba Joined Alloys, is an Equal Opportunity Employer. We require a pre-employment drug screen, including THC.

Job Description About the Role: We are looking for an experienced CNC lathe machinist who is familiar with modern CNC lathes and/or Mill Turn lathes, who wants long-term and fruitful career. We are open to hiring for 1st, 2nd or weekend shift for this position. This position plays a critical role in the manufacturing process by operating our CNC lathes to produce precision parts and components. This position requires a deep understanding of machining techniques, materials, and tooling to ensure that all products meet stringent quality and specification standards. The machinist will interpret technical drawings and blueprints to set up and adjust machines for optimal performance. Attention to detail and problem-solving skills are essential to troubleshoot issues and maintain efficient production workflows. Ultimately, the role contributes to the overall success of the manufacturing operation by delivering high-quality machined parts on time and within budget. Minimum Qualifications: Knowledge of live tooling Experience on machines with up to 9 axis Proven experience operating CNC lathe machines in a manufacturing environment. Ability to read and interpret technical drawings and blueprints. Familiarity with precision measuring tools such as calipers, micrometers, and gauges. Strong mechanical aptitude and attention to detail. Preferred Qualifications: Completion of a formal CNC machining or manufacturing technology program. Experience with CNC programming and CAD/CAM software. Knowledge of metallurgy and material properties relevant to machining. Certification from a recognized machining or manufacturing organization. Experience working in a lean manufacturing or continuous improvement environment. Responsibilities: Set up, operate, and maintain CNC lathes and/ Mill Turn machines to manufacture precision parts according to engineering specifications. Read and interpret blueprints, technical drawings, and CAD/CAM programs to determine machining requirements. Perform routine inspections and quality checks using precision measuring instruments to ensure parts meet tolerances. Adjust machine settings and tooling as necessary to optimize production efficiency and product quality. Collaborate with engineering and quality assurance teams to resolve machining issues and implement process improvements. Maintain accurate production records and report any equipment malfunctions or safety concerns promptly. Follow all safety protocols and maintain a clean and organized work environment. Skills: The CNC Lathe Machinist utilizes technical skills daily to set up and operate complex machinery, ensuring parts are produced to exact specifications. Proficiency in reading blueprints and interpreting CAD/CAM programs allows the machinist to accurately translate designs into physical components. Precision measurement skills are essential for verifying tolerances and maintaining quality standards throughout production. Problem-solving abilities enable the machinist to quickly identify and correct machine or process issues, minimizing downtime. Additionally, strong communication and teamwork skills facilitate collaboration with engineers and quality personnel to continuously improve manufacturing processes. About Company: Axian Technology has been supplying products and services to aerospace, military, medical, electronics and commercial customers since 1959. Axian supplies products to customers around the world using the latest machinery, systems, and controls. We are an industry leader in the manufacturing of machined parts. Our facility is a modern, state-of-the-art manufacturing complex located in north central Phoenix, Arizona. In 2020, we moved into a larger facility to allow for continued growth. In this move, we added about 10,000 square feet to our footprint. Previously, Axian populated 3 separate buildings, totaling about 30,000 square feet. Axian is now under one roof, with approximately 42,000 square feet in our manufacturing plant. Axian is well versed in CNC machining, as well as manual processes where needed. Our variety of machines allows us to be competitive on a wide variety of products, while reducing the need to outsource any machining, which further drives down our costs. Our Mission Statement Our mission is to be an industry leader in the field of small parts manufacturing. Our Operating Philosophy To deal with our customers and employees with honesty, integrity, and understanding. To maintain an overwhelming sense of “customer”, both for our external and our internal customers. To strive for continuous improvement in our procedures, processes, and products. To respect and understand our process variations, and to always strive to keep them in control. And to always keep our focus on the process, not the product, for it is only in controlling the process that true quality is achieved.

Job Description**Mill Machinist - Level 2/3 ** Schedule: Full-Time | Night Shift (Mon-Fri, 3:15 PM - 1:15 AM) medical, dental, and vision coverage after 60 days 401(k) planholiday paycareer advancement opportunities About the Role Join our team as a CNC Mill Operator and take pride in producing high-quality precision parts that meet strict industry standards. You'll work in a clean, organized environment where safety, quality, and teamwork come first. If you're an experienced machinist with a strong work ethic and attention to detail, we want to hear from you! What You'll Do Operate CNC Mill machines following company guidelines and safety standards. Read and interpret traveler instructions and blueprints. Load/unload materials and parts efficiently. Perform basic setups and communicate tooling needs. Measure and document inspection data and production standards. Maintain a clean, organized work area and complete necessary documentation. Collaborate with peers and provide feedback for continuous improvement. What We're Looking For Experience: 5+ years CNC Mill operation and setup experience. Education: High school diploma or GED. Skills:- Intermediate knowledge of machine functions, tolerances, and GD&T. Strong mechanical and mathematical skills. Proficiency in Microsoft Excel. Excellent communication and teamwork abilities. Attention to detail and a strong work ethic. Physical Requirements Ability to stand for extended periods and lift up to 50 lbs. Comfortable working in an environment with occasional fumes, odors, and dust. Why Join Us? Competitive pay and benefits. Opportunities for growth and skill development. Supportive team environment focused on quality and safety. You should be proficient in: Equipment Troubleshooting CNC Tooling CNC Programming

Job DescriptionDescription: Purpose of Function: This role primarily operates CNC lathes, running parts according to engineering drawings and responsible for certification. but you'll also receive cross-training to support other manufacturing areas. If you like learning new skills, staying busy, and contributing wherever the team needs you, this is a great fit. Main Tasks/Responsibilities/Authorities: Main Tasks: Review production orders to verify correct specifications Set up lathe and operate per specifications Maintain all logs Responsibilities: Maintain a clean and safe work environment Alert Manager of any repair needs of other areas of concern with regard to the facility Troubleshoot and repair manufacturing equipment Assist in manufacturing processes as directed Assist in engineering processes as directed Perform a variety of tasks to support the day-to-day operations of the business, including cross-functional support Requirements: Function Requirements: (education, experience, competences, etc) The Lathe technician should have a high school degree or equivalent. Prior experience in a manufacturing technician role, following work instructions and using a lathe is required.

Job Description CNC Lathe Operator NIGHT SHIFT (20% Pay differential) Aerospace & Defense Manufacturing Shift: Night Shift REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: Setup & operate to produce high precision aerospace components on ferrous and non-ferrous materials Daily machine maintenance (checking fluid levels, cleaning out chips, etc.) Maintaining a clean and organized work space Tool management, entering in offsets to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars. Etc.) Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.) Maintaining correct part counts on the MOT for the operations performed Ability to hold tolerances of .0002” - .0005” while maintaining a high level of productivity Able to work independently and stay on task - operate 2 machines regularly Ability to problem solve and communicate process improvement suggestions with management Communicate any job-related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification Reporting all machine collisions and malfunctions to lead personnel Required Skills/Abilities: Familiarity with Mazak machines a plus Proficient with standard types of measuring inspection equipment to verify machined dimensions or product - Indicating Micrometers, Bore Gages, Sunnen Gage, & Test Indicators Read and interpret of B/P's including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards and following directions Ability to read and interrupt G & M machine codes and program understanding is a plus Experience holding tolerances of .0002” - .0005” and surface finish requirements of 16 is a plus Strong attention to detail, quality-focused, and willing to learn General knowledge of standard shop practices and equipment Basic Qualifications: High School or GED 5+ years' experience preferred but not required Ability to use computer software, company ERP system, clocking in and out of jobs, etc. Familiarity with Mazak machines a plus Familiarity with live tooling a plus Must be able to stand for the majority of the work shift Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Position Summary: Senior Machinist is a machinist who is highly proficient in CNC mills or lathes. Skill level exceeds that of the Machinist II. Can do process engineering and CNC programming of the most complex workpieces without any instructions. Must be able to do complex problem solving of machined parts and set ups. Essential / Key Job Responsibilities: * Own basic hand tools required for machinist trade. * Program, set up, and operate CNC mill, lathe, and basic shop powered tools. * Read drawings, follow verbal instructions, and apply basic mathematical skills to complete required tasks. * Inspect own work using standard measuring tools such as calipers, micrometer, and pin gages. * Maintain a current status in field of expertise through continuing education and appliable trade shows. * Work with SolidWorks solid models to create control programs for machines. * Process engineering of machined parts. Required Qualifications: * 5-10 years' experience in machining and CAM programming. * Ability to program, set up and operate CNC mills and lathes. * Ability to read and interpret drawings with GD&T per ASME 14.5. * Knowledge of various metals, plastics, machine shop operations. * Effective time management. * Excellent communication skills. Preferred Qualifications: * Mastercam and SolidWorks experience. Education and/or Experience: * Trade school certification or equivalent experience is desired, but not required. Physical Demands: While performing the duties of this job, the employee is regularly required to stand, walk, sit, use sight, and use hands to manipulate, handle or feel objects, tools, controls, and office equipment. The employee frequently is required to verbally communicate with other associates. The employee is occasionally required to reach with hands and arms and stoop, kneel or crouch. Work Environment: While performing the duties of this job, the employee may be in an open machine shop environment. Candidate must be able to work in a team-oriented, fast-paced environment. BD is an affirmative action, equal opportunity employer that values and actively seeks diversity in the workforce. This is intended as a summary of the primary responsibilities of and qualifications for this position. The job description is not intended as inclusive of all duties an individual in this position might be asked to perform or of all qualifications that may be required either now or in the future. At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work Location USA AZ - Tempe Headquarters Additional Locations USA AZ - Tempe BPV Building 1 Work Shift US BD 1st Shift 730am-4pm (United States of America)

Job Description Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm. We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics. Staff Experts, LLC is currently seeking to fill Manual Machinist positions. If you are interested, please email us your resume and call 602-666-6500 to schedule an interview appointment. Details: Set Up And operate manual machines. Works with precision specifications and work instructions. Responsibilities: Set up and operate manual machine. Ensure the quality of parts meet clients requirements and industry standards. Strong knowledge of geometric tolerance, blueprints and specifications Expert skill in precision measuring equipment Inspect finished product for defects Maintain equipment and ensure that all tools are being used safely. Comply with all safety policies and procedures Manage workflow to meet changing priorities Check accuracy Complete all preparation and clean up responsibilities before and after project completion. Requirements: Drug Screen (Required) Ability to pass a 7-year Background Check (Required) 5+ year of Manual Machine experience (Required) 5 years of Aerospace experience (Required) Maintain a positive and responsible work environment Ability to follow processes, be organized and punctual Motivated to be self-starter with the ability to also work in a team environment Contact Information: Staff Experts, LLC is an Equal Opportunity Employer. Contact Information: Staff Experts, LLC (Phoenix Branch) 7776 S. Pointe Parkway West, Suite 148 Phoenix, AZ 85044 602-666-6500 Office 602-391-2369 Fax www.staffexpertsinc.com

SummarySenior Machinist is a journeyman prototype machinist. We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Position Summary: Senior Machinist is a machinist who is highly proficient in CNC mills or lathes. Skill level exceeds that of the Machinist II. Can do process engineering and CNC programming of the most complex workpieces without any instructions. Must be able to do complex problem solving of machined parts and set ups. Essential / Key Job Responsibilities: Own basic hand tools required for machinist trade. Program, set up, and operate CNC mill, lathe, and basic shop powered tools. Read drawings, follow verbal instructions, and apply basic mathematical skills to complete required tasks. Inspect own work using standard measuring tools such as calipers, micrometer, and pin gages. Maintain a current status in field of expertise through continuing education and appliable trade shows. Work with SolidWorks solid models to create control programs for machines. Process engineering of machined parts. Required Qualifications: 5-10 years' experience in machining and CAM programming. Ability to program, set up and operate CNC mills and lathes. Ability to read and interpret drawings with GD&T per ASME 14.5. Knowledge of various metals, plastics, machine shop operations. Effective time management. Excellent communication skills. Preferred Qualifications: Mastercam and SolidWorks experience. Education and/or Experience: Trade school certification or equivalent experience is desired, but not required. Physical Demands: While performing the duties of this job, the employee is regularly required to stand, walk, sit, use sight, and use hands to manipulate, handle or feel objects, tools, controls, and office equipment. The employee frequently is required to verbally communicate with other associates. The employee is occasionally required to reach with hands and arms and stoop, kneel or crouch. Work Environment: While performing the duties of this job, the employee may be in an open machine shop environment. Candidate must be able to work in a team-oriented, fast-paced environment. BD is an affirmative action, equal opportunity employer that values and actively seeks diversity in the workforce. This is intended as a summary of the primary responsibilities of and qualifications for this position. The job description is not intended as inclusive of all duties an individual in this position might be asked to perform or of all qualifications that may be required either now or in the future. At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work LocationUSA AZ - Tempe HeadquartersAdditional LocationsUSA AZ - Tempe BPV Building 1Work ShiftUS BD 1st Shift 730am-4pm (United States of America)

As a Machinist - Level 2 (FAA) here at Honeywell, you will be responsible for performing machining operations to produce high-quality components while ensuring adherence to safety and quality standards. Your skills will contribute to the efficiency and effectiveness of our repair and overhaul processes, playing a vital role in meeting customer demands and production goals. You will report directly to our ISC Production Supervisor, and you'll work out of our Phoenix, Arizona location on an onsite work schedule. In this role, you will impact the overall productivity and quality of our repair and overhaul operations by utilizing your machining expertise to produce precise components and support the maintenance of our equipment. KEY RESPONSIBILITIES Set up and operate various machining equipment, including lathes, mills, and grinders, to produce components according to specifications. Read and interpret blueprints, technical drawings, and work orders to determine machining requirements. Perform routine maintenance and troubleshooting on machining equipment to ensure optimal performance. Inspect finished products for quality and accuracy, making adjustments as necessary to meet specifications. Collaborate with team members to improve processes and enhance operational efficiency. BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status. FAA REQUIREMENTS All applicants for placement in DOT/FAA safety-sensitive positions will be required to submit to a pre-employment drug test, testing for Marijuana, Cocaine, Amphetamines (amphetamine, methamphetamine, MDMA, MDA), Phencyclidine (PCP), and Opioids (codeine, heroin, morphine, oxycodone, oxymorphone, hydrocodone, hydromorphone). The DOT/FAA regulations require all employees, regular and temporary, in safety-sensitive positions, to be included in the Honeywell Anti-drug and Alcohol Misuse Prevention Plan. ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here THE BUSINESS UNIT Honeywell Aerospace Technologies provides advanced aerospace solutions and services that enhance the safety, efficiency, and performance of aircraft and spacecraft. Our commitment to innovation and excellence positions us as a leader in the aerospace industry, delivering cutting-edge technologies that meet the evolving needs of our customers. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity: click here YOU MUST HAVE Minimum of 2 years of experience in machining processes and operations. Strong technical knowledge of machining equipment and tools. Proficiency in reading and interpreting blueprints and technical drawings. Experience with quality control processes and inspection techniques. Familiarity with safety regulations and best practices in a machining environment. WE VALUE Bachelor's degree in Mechanical Engineering or a related field. Experience in repair and overhaul processes. Strong problem-solving skills and attention to detail. Ability to work under pressure and meet tight deadlines. Continuous learning mindset and willingness to adapt to new technologies.

Job Title: Manual MachinistCompany: Custom Control Sensors Location: Phoenix, AZ Employee Type: Full Time, Non-Exempt Industry: Manufacturing Education: High School Diploma or equivalent GEDExperience: At least five years of experience in a similar aerospace industry or technical training is essential. Company OverviewCustom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits MedicalDental 401k with MatchEmployer funded Life Insurance and Long-term DisabilityVoluntary Short-term DisabilitySick and Vacation Leave9 Paid Holidays Job Description:The Manual Machinist utilizes parts, prints, drawings, travelers or engineering information in order to determine methods and sequences of operations needed to fabricate prototype components, jigs and fixtures within set tolerances. Key Responsibilities:Setup and operation of manual machinery such as lathes, mills, drill presses and surface grinders.Demonstrate knowledge of working properties of common metals.Select standard materials and equipment required for the job.Machining of complex precision parts to close specifications. Aligning and securing of holding fixtures, cutting tools, attachments, accessories and materials onto machines.Work well with leads of various company departments including engineering, weld shop, assembly and machine shop.Provide training to lower level machinists Maintain a clean and organized workspace.Skills and Requirements:Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident.Able to read and comprehend prints, engineering drawings and information in order to determine methods and sequences needed for completion Proficient knowledge of all machining equipment operations Manual dexterity to safely and proficiently utilize precision equipment, construct moderate to complex set-ups Able to work independently within established procedures associate within job function Good communication skills Ability to read, write and follow written and verbal instruction in EnglishAbility to work well with only a modest amount of repeated instructions Be team oriented and possess flexibility and adaptability Conduct himself/herself in a business-like and civil manner Physical Requirements:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, stand, use hands and fingers to flex and extend fingers with opposition of thumb; palmer grasp, talk or hear. The employee is frequently required to walk, bend stoop, reach, turn, twist, push, pull, and to move within all areas of the facilities and parking lots. A computer is used to access, input, and retrieve data. The employee must occasionally lift and/or move over 20 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception, and the ability to adjust and focus. An annual eye exam is required. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies. Compensation details: 25-29 Hourly Wage PIe334326db569-31181-36884695

As a **Machinist - Level 2 (FAA)** here at Honeywell, you will be responsible for performing machining operations to produce high-quality components while ensuring adherence to safety and quality standards. Your skills will contribute to the efficiency and effectiveness of our repair and overhaul processes, playing a vital role in meeting customer demands and production goals. You will report directly to our **ISC Production Supervisor,** and you'll work out of our **Phoenix, Arizona** location on an **onsite** work schedule. In this role, you will impact the overall productivity and quality of our repair and overhaul operations by utilizing your machining expertise to produce precise components and support the maintenance of our equipment. **KEY RESPONSIBILITIES** + Set up and operate various machining equipment, including lathes, mills, and grinders, to produce components according to specifications. + Read and interpret blueprints, technical drawings, and work orders to determine machining requirements. + Perform routine maintenance and troubleshooting on machining equipment to ensure optimal performance. + Inspect finished products for quality and accuracy, making adjustments as necessary to meet specifications. + Collaborate with team members to improve processes and enhance operational efficiency. **YOU MUST HAVE** + Minimum of 2 years of experience in machining processes and operations. + Strong technical knowledge of machining equipment and tools. + Proficiency in reading and interpreting blueprints and technical drawings. + Experience with quality control processes and inspection techniques. + Familiarity with safety regulations and best practices in a machining environment. **WE VALUE** + Bachelor's degree in Mechanical Engineering or a related field. + Experience in repair and overhaul processes. + Strong problem-solving skills and attention to detail. + Ability to work under pressure and meet tight deadlines. + Continuous learning mindset and willingness to adapt to new technologies. **BENEFITS OF WORKING FOR HONEYWELL** In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here (******************************** The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. **U.S. PERSON REQUIREMENTS** Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status. **FAA REQUIREMENTS** All applicants for placement in DOT/FAA safety-sensitive positions will be required to submit to a pre-employment drug test, testing for Marijuana, Cocaine, Amphetamines (amphetamine, methamphetamine, MDMA, MDA), Phencyclidine (PCP), and Opioids (codeine, heroin, morphine, oxycodone, oxymorphone, hydrocodone, hydromorphone). The DOT/FAA regulations require all employees, regular and temporary, in safety-sensitive positions, to be included in the Honeywell Anti-drug and Alcohol Misuse Prevention Plan. **ABOUT HONEYWELL** Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here (******************************** **THE BUSINESS UNIT** Honeywell Aerospace Technologies provides advanced aerospace solutions and services that enhance the safety, efficiency, and performance of aircraft and spacecraft. Our commitment to innovation and excellence positions us as a leader in the aerospace industry, delivering cutting-edge technologies that meet the evolving needs of our customers. _Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity:_ click here (***************************************************************** Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

Title: Manual Machinist (Aerospace Sheet Metal) Company Overview: A leading aerospace sheet metal machine shop specializing in precision manufacturing for the aerospace industry is hiring. Committed to delivering high-quality components and assemblies to customers, utilizing state-of-the-art machinery and a skilled workforce. We are currently seeking a talented Manual Machinist to join the team. Job Summary: As a Manual Machinist, you will be responsible for the setup and operation of manual machining equipment to produce precision aerospace components. The ideal candidate will have a minimum of 3 years of experience in manual machining, particularly within the aerospace industry. This role requires strong technical skills, attention to detail, and the ability to work effectively in a fast-paced manufacturing environment. Key Responsibilities: Set up and operate manual machining equipment such as lathes, milling machines, grinders, and drill presses to produce aerospace components according to engineering specifications. Interpret technical drawings, blueprints, and work instructions to determine machining requirements and tolerances. Perform routine maintenance and troubleshooting of manual machining equipment to ensure optimal performance and minimal downtime. Conduct quality inspections of machined parts using precision measuring instruments such as calipers, micrometers, and gauges to verify conformance to specifications. Collaborate with engineering and production teams to resolve any issues related to machining processes, tooling, or part quality. Adhere to all safety protocols and procedures to maintain a safe working environment. Maintain accurate documentation of machining operations, including production logs, inspection records, and equipment maintenance logs. Assist with other manufacturing tasks and projects as needed. Qualifications: Minimum of 3 years of experience as a manual machinist, preferably in the aerospace industry. Proficiency in setting up and operating manual machining equipment, including lathes, milling machines, grinders, and drill presses. Strong understanding of machining principles, tooling selection, and machining techniques. Ability to interpret technical drawings, blueprints, and work instructions. Experience with precision measuring instruments such as calipers, micrometers, and gauges. Excellent problem-solving skills and attention to detail. Ability to work effectively in a team environment and communicate effectively with colleagues. Flexibility to work occasional overtime and weekends as needed. Ability to lift and move objects weighing up to 40 lbs. Education: High school diploma or equivalent required. Technical training or certification in machining or related field preferred. Join the team and be a part of a dynamic and innovative aerospace manufacturing environment. They offer competitive compensation, benefits, and opportunities for professional growth and development. Apply today to take the next step in your machining career!

Full-time Description Purpose of Function: This role primarily operates CNC lathes, running parts according to engineering drawings and responsible for certification. but you'll also receive cross-training to support other manufacturing areas. If you like learning new skills, staying busy, and contributing wherever the team needs you, this is a great fit. Main Tasks/Responsibilities/Authorities: Main Tasks: Review production orders to verify correct specifications Set up lathe and operate per specifications Maintain all logs Responsibilities: Maintain a clean and safe work environment Alert Manager of any repair needs of other areas of concern with regard to the facility Troubleshoot and repair manufacturing equipment Assist in manufacturing processes as directed Assist in engineering processes as directed Perform a variety of tasks to support the day-to-day operations of the business, including cross-functional support Requirements Function Requirements: (education, experience, competences, etc) The Lathe technician should have a high school degree or equivalent. Prior experience in a manufacturing technician role, following work instructions and using a lathe is required. Salary Description $18.00 per hour